Please help me with my new g3 beige :D

Hi all,
I've taken the dive and decided to have some fun with this old g3 beige I purchased for cheap online.
I've got the outrigger desktop style g3, and I'm wondering what the best upgrades to the memory, CPU, hard drive, and graphics can be? Also, should I put OS9 on it? (no OS on it right now)
I've built PCs for years now, but I've never moved hardware around in a mac. Is there any distinct differences I should know going in?
Any help would be greatly appreciated! Thanks!
Tony

This article has links for info on setting up file/internet sharing over a LAN. I used Internet Explorer 5.1.7 (final pre-OS X release in 2001) for years, but about 1-2 years ago, I started getting compatibility messages related to upgrading my browser. Netscape Communicator was another option, but was a memory hog. Mozilla also had a pre-OS X browser. Some forum regulars recommend iCab for older Macs.
You'd only need an ATA-133 controller card, if you wanted to have full capacity recognition of a 160 GB hard drive (or larger). The beige G3's onboard IDE controller can fully recognize a 120 GB drive or smaller. You can add a standard 3.5" IDE/E-IDE, Parallel ATA (not Serial ATA or SATA) hard drive, the same type as used in PCs. If you found a 10 GB or 20 GB hard drive, it would probably be a used pull, as that small capacity isn't manufactured anymore. Either of the expansion bays to the left of the optical drive bay in the desktop model can accommodate a 3.5" drive. You'll need the appropriate plastic mounting sled for the drive, because the upper bay uses a slightly different style sled than the lower bay does. The second hard drive would have to share the ATA bus with the optical drive, because there's no feasible way to connect the original hard drive (where it's mounted) and the second hard drive to the same ATA cable/bus. If you were to move the existing hard drive to the lower 3.5" upper drive bay and install the second hard drive directly above it, their shared ribbon cable could be fed through the same slot used by the optical drive's ribbon cable. You would also have to feed the power cable up from the lower chassis floor. This arrangement would require removal of the optional Zip drive, if your desktop model has one.
Go to "Data Memory Systems" web site, click on "G3 Memory," but choose one of the Blue and White G3 models listed for compatible PC-100 memory for your beige G3. Their memory for the beige G3 models may only be PC-66, which I wouldn't buy today. The PC-100 memory is actually a better choice for the beige G3s. Compatible 256 MB DIMMs will be 168-pin, PC-100 (unbuffered, non-ECC, non-parity) SDRAM with low density (128 Megabit) chips. The correct memory card will have 8 chips on both the front and back of the card, for a total of 16 chips. If you buy a 256 MB DIMM that only has 8 chips on one side of the card or 4 chips on the front and 4 on the back, the memory has 256 Megabit chips, which aren't supported by the beige G3's memory controller.
I think the Radeon 9200 is almost too good for a beige G3, given the price tag. To save some $$, I'd look for an older/used Radeon 7000 for Macs at eBay, which is still much better than the onboard ATI graphics chip.

Similar Messages

Please help me with my new apple tv 2 audio skipping constantly

Hey I set up my new apple tv 2 today i work in a retail store selling all this stuff but I can't figure this out. Apple tv hdmi connects to my Yamaha amp B&W speakers and Sony Bravia tv. It mirrors fine ( but isn't full screen on tv) and iPad and iPhone work with it picture is amazing resolution but every bit of audio whether it's iTunes you tube Internet or watching trailers in apple tv lags constantly with audio picture stays fine but audio is killing me. Anyone help?

I had a new HD apple tv that the audio kept cutting out for an instant.it was replaced with a second one with the same problem. Apple finally diagnosed the problem.
I replaced a second gen apple tv with the HD version without changing out the power cord , I simply used the existing power cord and hdmi cable.Apparently that was enough to cause the audio problem . Since I used the new power cord with the new HD Apple TV , I have perfect audio.
Hope that this helps..

Please help me with my new IPod Nano!!!

I just got my new Ipod Nano about a month ago, and I need alittle bit of help with it. I would like to know how to add videos and pictures. I mainly just need to know how to add pictures. I use Windows incase that helps anyone. Thanks to much to the people that will be willing to help me out. Please someone reply soon!!!

*I would like to know how to add videos and pictures*
For adding videos, have a look at this guide: Syncing Videos to iPod
*I mainly just need to know how to add pictures.*
When you say pictures do you mean photographs or album artwork? Here's a simple "How To" on downloading photos from a folder on your hard disk to an iPod:
1 Create a folder on your hard drive to hold the photos you want on your iPod. Call it iPod Photos for example
2 Drag the photos you want from your usual picture folder into the folder you just created
2 Open iTunes, select your iPod in the iTunes Source list.
3 Click the Photos tab and select “Synch photos from.”
4 Choose “Choose Folder” from the pop-up menu and select the iPod photos folder you created.
5 When you want to change what photos are on the iPod just add or remove the photos from the folder you have made and syncronise the the iPod
On a smaller device like the Nano I would tend to leave the "Include Full Resolution photos" box unchecked as these will take up a lot of space on the iPod and are only useful if you want to copy photos from one computer to another. iTunes will add "optimised", small TV quality versions of the photos to the iPod for you to view.
To add album artwork, first of all make sure your iPod is enabled to show the artwork:
1. Connect your iPod to your computer
2. Click on the iPod icon when it appears the iTunes Source pane to bring up the preference tabs.
3. Select the Music tab of the iPod settings. The iPod settings are displayed to the right in the main iTunes window.
4. Select the "Display album artwork on your iPod" check box.
5. Click Apply to save the changes. The iPod begins to update as soon as Apply is clicked.
You can also have a look at this guide: iTunes 7 for Windows - Adding artwork to songs and other items

Please help me with my new iphone 5

trying to set it up but i think i got it messed up. Now i cant download apps like facebook to my new iphone 5

What is the error message provided?

Hi there. Can someone please help me with copying photos from my old iPad to my new one? Thanks.

Hi there. Can someone please help me with copying photos from my old iPad to my new ipad2? Thanks.

If you have a pc, when you plug your iPad in you should see the windows pop up window offering to backup the photos. Do that and it will save all your photos and videos to your computer where you can then sync them back to your new one.
If the pop up doesn't come up, double click on my computer and navigate your way to the iPad. Double cick on it an d navigate to the DCIM folder. Drag your photos and videos to your pc, then sync them back onto your iPad.

Please help me creating a new listener with different port#.

I have two instances in a server. both have different homes. I want to create a seperate listener for the second one i created.
But that is not happening.
here i tried to give name from LISTENER TO LISTENER1 & Port# from 1521 to 1524.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /apps2/oracle)
(PROGRAM = extproc)
LISTENER1 =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = aixth53)(PORT = 1524))
When I check lsnrctl status with LISTENER1 , it still shows the other instance home with port#: 1521
Please help me creating a new listener with different port#.
Thanks,

marist89 wrote:
sb92075 wrote:
marist89 wrote:
sybrand_b wrote:
The listener is a broker only and doesn't play any role in normal communications.
It just forks a process or a thread, and that's it.And the listener is a single point of failure. Listener goes down, you can't connect to the db. That's why you need two listeners.If listener one goes down, then listener two goes down for exact same reason since it is a single executable file.I'm not playing tit-for-tat with you. Fact is, there are situations where people who are not you might want to use more than one listener.Some folks might want to jab a sharp pencil into their eye, too.
Just because you can do something, it does not necessarily mean it should be done.

I am using iphone 4..32 gb...i hav updated to ios6..i am experiencing serious lags...watever m doin d phone lags n goes to the home screen...frequency is much greater..please help me with it...i even replaced my device but same problem on new one..!!!!

please help me with dis...
I am using iphone 4..32 gb...i hav updated to ios6..i am experiencing serious lags...watever m doin d phone lags n goes to the home screen...frequency is much greater..please help me with it...i even replaced my device but same problem on new one..!!!!

Restore the phone as a new device. There is probably something that was corrupted on your phone during the update and has been passed via the backup to the replacement phone. If the corruption/problem is contained in the backup, you'll need to re-sync your data, and re-install your apps manually. Restoring the backup again will only bring the problem back with it.
If restoring it as new does not fix it, then make an appointment at the genius bar.

Please help me with portfolio.I am new in graphic design.I need portfolio done immediately soon as possible otherwise my design advisor will not let me register for fall. I need 15 or 10 artworks to show.Please help me

Please help me with portfolio.I am new in graphic design.I need portfolio done immediately soon as possible otherwise my design advisor will not let me register for fall. I need 15 or 10 artworks to show.Please help me.

Farooq,
If you look at the first one, you should be able to align quite easily as follows, View>Smart Guides being your friends:
1a) ClickDrag the top flower with the Selection Tool (black arrow) so it is clear of the pointy part;
1b) Click an empty spot on the Artboard to deselect, then ClickDrag the top flower by its bottom Anchor Point (Smart Guides say anchor when you are close enough to grab it) down to snap to the top Anchor Point on the pointy part (Smart Guides say anchor when you are close enough);
1c) Do the same for the boroom flower.
If you look at the third one, to get the triangles and the hexagon sized and aligned precisely, you may, creating them with stroke and no fill:
3a) Click with the Polygon Tool and select a suitable/chosen Radius and 6 Sides, then Object>Transform>Rotate by 30 degrees (or use the Rotate option in the Transform palette), you may Object>Transform>Reset Bounding Box to have it look nicer;
3b) Click with the Polygon Tool and select the same Radius and 3 sides, then deselect and ClickDrag the top Anchor Point to snap to the top Anchor Point of the hexagon;
3c) Object>Transform>Rotate by 180 degrees clicking Copy, deselect, and ClickDrag the bottom Anchor Point to snap to the bottomAnchor Point of the hexagon;
3d) Select all and Ctrl/Cmd+G to Group (for alignment purposes, you will know why if you try without grouping, see below).
To create full symmetry, you may use circles rather than almost circular ellipses; you may:
3d) Click with the Ellipse Tool and select a suitable/chosen Width = height;
3e) Object>Transform>Move a copy vertically by the Height (= Width) twice (or you may Ctrl/Cmd+D to repeat), to get three circles over one another with no gaps;
3f) Select the topmost and bottommost ones and Object>Transform>Rotate a copy by 120 degrees twice, to have all the seven circles precisley touching one another; you may Group them, but it is not necessary.
To have everything aligned, just:
3g) Select everything and click Vertical Align Center and Horizontal Align Center in the Align palette; you may click the pointy group or the circles ojnce more before aligning if you want to keep it in place (that will make it the key object that the other set is aligned to).
These ways may also help you further.
Edit: About half an hour after midnight here. High time to attend to other duties, before the sun is up.

HELP!!!! My Hotmail no longer works with Safari v. 5.0.6 and my Imac Leopard operating system 10.5.8. Please help me with any suggestions on what to do. Thank you.

HELP!!!! My Hotmail no longer works with Safari v. 5.0.6 and my Imac Leopard operating system 10.5.8. Please help me with any suggestions on what to do. Thank you. I cannot find any new downloads for Safari that work with Leopard. The newest ones only work with Lion. My Firefox browser still works though but I would rather use Safari and cannot access any e-mails or send any e-mails via Safari. This happened about 3 weeks ago and I thought it was just a glitch on Hotmail's site. Now I realize Hotmail must have released an update that no longer works with Leopard 10.5.8. PLEASE HELP ME!!!! Thanks to anyone and everyone who reads this and attempts to help me. I do not know what to do....

Hi Sue,
What exactly happens when trying Safari?
They did change it to Outlook recently, but while not pretty, I can access mine with Safari 4.0 still...
You can also set it up in Mail so you don't need a browser at all if you want.

Please help me with the following two questions, very urgent

Hi All,
Please help me with some scenerios about what are the common problems when modifying a standard script such a standard Invoice script and how can we overcome them.
What are the common problems encountered when working with SAP SMARTFORMS and how to overcome them?
Please help me with these questions, its very urgent.
Thanks in advance.
MD.

hi
hope it will help you.
reward if ehlp.
How to create a New smartfrom, it is having step by step procedure
http://sap.niraj.tripod.com/id67.html
step by step good ex link is....
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
Here is the procedure
1. Create a new smartforms
Transaction code SMARTFORMS
Create new smartforms call ZSMART
2. Define looping process for internal table
Pages and windows
First Page -> Header Window (Cursor at First Page then click Edit -> Node -> Create)
Here, you can specify your title and page numbering
&SFSY-PAGE& (Page 1) of &SFSY-FORMPAGES(Z4.0)& (Total Page)
Main windows -> TABLE -> DATA
In the Loop section, tick Internal table and fill in
ITAB1 (table in ABAP SMARTFORM calling function) INTO ITAB2
3. Define table in smartforms
Global settings :
Form interface
Variable name Type assignment Reference type
ITAB1 TYPE Table Structure
Global definitions
Variable name Type assignment Reference type
ITAB2 TYPE Table Structure
4. To display the data in the form
Make used of the Table Painter and declare the Line Type in Tabstrips Table
e.g. HD_GEN for printing header details,
IT_GEN for printing data details.
You have to specify the Line Type in your Text elements in the Tabstrips Output options.
Tick the New Line and specify the Line Type for outputting the data.
Declare your output fields in Text elements
Tabstrips - Output Options
For different fonts use this Style : IDWTCERTSTYLE
For Quantity or Amout you can used this variable &GS_ITAB-AMOUNT(12.2)&
5. Calling SMARTFORMS from your ABAP program
REPORT ZSMARTFORM.
Calling SMARTFORMS from your ABAP program.
Collecting all the table data in your program, and pass once to SMARTFORMS
SMARTFORMS
Declare your table type in :-
Global Settings -> Form Interface
Global Definintions -> Global Data
Main Window -> Table -> DATA
Written by : SAP Hints and Tips on Configuration and ABAP/4 Programming
http://sapr3.tripod.com
TABLES: MKPF.
DATA: FM_NAME TYPE RS38L_FNAM.
DATA: BEGIN OF INT_MKPF OCCURS 0.
INCLUDE STRUCTURE MKPF.
DATA: END OF INT_MKPF.
SELECT-OPTIONS S_MBLNR FOR MKPF-MBLNR MEMORY ID 001.
SELECT * FROM MKPF WHERE MBLNR IN S_MBLNR.
MOVE-CORRESPONDING MKPF TO INT_MKPF.
APPEND INT_MKPF.
ENDSELECT.
At the end of your program.
Passing data to SMARTFORMS
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'ZSMARTFORM'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
if sy-subrc <> 0.
WRITE: / 'ERROR 1'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function FM_NAME
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
GS_MKPF = INT_MKPF
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Smartform
you can check this link here you can see the steps and you can do it the same by looking at it..
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
SMARTFORMS STEPS.
1. In Tcode se11 Create a structure(struct) same like the Internal table that you are going to use in your report.
2. Create Table type(t_struct) of stracture in se11.
3. In your program declare Internal table(Itab) type table of structure(struct).
4. Define work area(wa) like line of internal table.
5. Open Tcode Smartforms
6. In form Global setting , forminterface Import parameter define Internal table(Itab) like table type of stracture(t_struct).
7. In form Global setting , Global definitions , in Global data define Work area(wa) like type stracture(struct).
8. In form pages and window, create Page node by default Page1 is available.
9. In page node you can create numbers of secondary window. But in form there is only one Main window.
10. By right click on page you can create windows or Go to Edit, Node, Create.
11. After creating the window right click on window create table for displaying the data that you are passing through internal table.
12. In the table Data parameter, loop internal internal table (Itab) into work area(wa).
13. In table there are three areas Header, Main Area, Footer.
14. Right click on the Main area create table line by default line type1 is there select it.
15. Divide line into cells according to your need then for each cell create Text node.
16. In text node general attribute. Write down fields of your work area(wa) or write any thing you want to display.
17. Save form and activate it.
18. Then go to Environment, function module name, there you get the name of function module copy it.
19. In your program call the function module that you have copied from your form.
20. In your program in exporting parameter of function pass the internal table(itab).
SAP Smart Forms is introduced in SAP Basis Release 4.6C as the tool for creating and maintaining forms.
SAP Smart Forms allow you to execute simple modifications to the form and in the form logic by using simple graphical tools; in 90% of all cases, this won't include any programming effort. Thus, a power user without any programming knowledge can
configure forms with data from an SAP System for the relevant business processes.
To print a form, you need a program for data retrieval and a Smart Form that contains the entire from logic. As data retrieval and form logic are separated, you must only adapt the Smart Form if changes to the form logic are necessary. The application program passes the data via a function module interface to the Smart Form. When activating the Smart Form, the system automatically generates a function module. At runtime, the system processes this function module.
You can insert static and dynamic tables. This includes line feeds in individual table cells, triggering events for table headings and subtotals, and sorting data before output.
You can check individual nodes as well as the entire form and find any existing errors in the tree structure. The data flow analysis checks whether all fields (variables) have a defined value at the moment they are displayed.
SAP Smart Forms allow you to include graphics, which you can display either as part of the form or as background graphics. You use background graphics to copy the layout of an existing (scanned) form or to lend forms a company-specific look. During printout, you can suppress the background graphic, if desired.
SAP Smart Forms also support postage optimizing.
Also read SAP Note No. 168368 - Smart Forms: New form tool in Release 4.6C
What Transaction to start SAP Smart Forms?
Execute transaction SMARTFORMS to start SAP Smart Forms.
Key Benefits of SAP Smart Forms:
SAP Smart Forms allows you to reduce considerably the implementation costs of mySAP.com solutions since forms can be adjusted in minimum time.
You design a form using the graphical Form Painter and the graphical Table Painter. The form logic is represented by a hierarchy structure (tree structure) that consists of individual nodes, such as nodes for global settings, nodes for texts, nodes for output tables, or nodes for graphics.
To make changes, use Drag & Drop, Copy & Paste, and select different attributes.
These actions do not include writing of coding lines or using a Script language.
Using your form description maintained in the Form Builder, Smart Forms generates a function module that encapsulates layout, content and form logic. So you do not need a group of function modules to print a form, but only one.
For Web publishing, the system provides a generated XML output of the processed form.
Smart Forms provides a data stream called XML for Smart Forms (XSF) to allow the use of 3rd party printing tools. XSF passes form content from R/3 to an external product without passing any layout information about the Smart Form.
SmartForms System Fields
Within a form you can use the field string SFSY with its system fields. During form processing the system replaces these fields with the corresponding values. The field values come from the SAP System or are results of the processing.
System fields of Smart Forms
&SFSY-DATE&
Displays the date. You determine the display format in the user master record.
&SFSY-TIME&
Displays the time of day in the form HH:MM:SS.
&SFSY-PAGE&
Inserts the number of the current print page into the text. You determine the format of the page number (for example, Arabic, numeric) in the page node.
&SFSY-FORMPAGES&
Displays the total number of pages for the currently processed form. This allows you to include texts such as'Page x of y' into your output.
&SFSY-JOBPAGES&
Contains the total page number of all forms in the currently processed print request.
&SFSY-WINDOWNAME&
Contains the name of the current window (string in the Window field)
&SFSY-PAGENAME&
Contains the name of the current page (string in the Page field)
&SFSY-PAGEBREAK&
Is set to 'X' after a page break (either automatic [Page 7] or command-controlled [Page 46])
&SFSY-MAINEND&
Is set as soon as processing of the main window on the current page ends
&SFSY-EXCEPTION&
Contains the name of the raised exception. You must trigger your own exceptions, which you defined in the form interface, using the user_exception macro (syntax: user_exception <exception name >).
Example Forms Available in Standard SAP R/3
SF_EXAMPLE_01
Simple example; invoice with table output of flight booking for one customer
SF_EXAMPLE_02
Similar to SF_EXAMPLE_01 but with subtotals
SF_EXAMPLE_03
Similar to SF_EXAMPLE_02, whereby several customers are selected in the application program; the form is called for each customer and all form outputs are included in an output request
Advantages of SAP Smart Forms
SAP Smart Forms have the following advantages:
1. The adaption of forms is supported to a large extent by graphic tools for layout and logic, so that no programming knowledge is necessary (at least 90% of all adjustments). Therefore, power user forms can also make configurations for your business processes with data from an SAP system. Consultants are only required in special cases.
2. Displaying table structures (dynamic framing of texts)
3. Output of background graphics, for form design in particular the use of templates which were scanned.
4. Colored output of texts
5. User-friendly and integrated Form Painter for the graphical design of forms
6. Graphical Table Painter for drawing tables
7. Reusing Font and paragraph formats in forms (Smart Styles)
8. Data interface in XML format (XML for Smart Forms, in short XSF)
9. Form translation is supported by standard translation tools
10. Flexible reuse of text modules
11. HTML output of forms (Basis release 6.10)
12. Interactive Web forms with input fields, pushbuttons, radio buttons, etc. (Basis-Release 6.10)

Please help me with the homework given to me by my teacher

hello,i am new in java programming please help me with the home work given to me by my teacher at school, help me to build an interface that can work with this code.i can build an interface but i dont just understand this code.
//references:
//http://forums.techguy.org/development/570048-need-write-java-program-convert.html
import java.util.Map;
import java.util.HashMap;
import java.util.Iterator;
import java.io.FileNotFoundException;
import java.io.IOException;
import java.io.BufferedReader;
import java.io.FileReader;
public class Translate
public static void main(String [] args) throws IOException
    if (args.length != 2)
      System.err.println("usage: Translate wordmapfile textfile");
      System.exit(1);
    try
      HashMap words = ReadHashMapFromFile(args[0]);
      System.out.println(ProcessFile(words, args[1]));
catch (Exception e)
      e.printStackTrace();
// static helper methods
   * Reads a file into a HashMap. The file should contain lines of the format
   *    "key\tvalue\n"
   * @returns a hashmap of the given file
@SuppressWarnings("unchecked")
private static HashMap ReadHashMapFromFile(String filename) throws FileNotFoundException, IOException
    BufferedReader in = null;
    HashMap map = null;
    try
      in = new BufferedReader(new FileReader(filename));
      String line;
      map = new HashMap();
      while ((line = in.readLine()) != null)
        String[] fields = line.split("\\t", 2);
        if (fields.length != 2) continue; //just ignore "invalid" lines
        map.put(fields[0], fields[1]);
finally
      if(in!=null) in.close(); //may throw IOException
    return(map); //returning a reference to local variable is safe in java (unlike C/C++)
   * Process the given file
   * @returns String contains the whole file.
private static String ProcessFile(Map words, String filename) throws FileNotFoundException, IOException {
    BufferedReader in = null;
    StringBuffer out = null;
    try {
      in = new BufferedReader(new FileReader(filename));
      out = new StringBuffer();
      String line = null;
      while( (line=in.readLine()) != null ) {
        out.append(SearchAndReplaceWordsInText(words, line)+"\n");
    } finally {
      if(in!=null) in.close(); //may throw IOException
    return out.toString();
   * Replaces all occurrences in text of each key in words with it's value.
   * @returns String
private static String SearchAndReplaceWordsInText(Map words, String text) {
    Iterator it = words.keySet().iterator();
    while( it.hasNext() ) {
      String key = (String)it.next();
      text = text.replaceAll("\\b"+key+"\\b", (String)words.get(key));
    return text;
   * @returns: s with the first letter capitalized
String capitalize(String s)
    return s.substring(0,0).toUpperCase() + s.substring(1);
}... here's the head of my pirate_words_map.txt
hello     ahoy
hi     yo-ho-ho
pardon me     avast
excuse me     arrr
yes     aye
my     me
friend     me bucko
sir     matey
madam     proud beauty
miss     comely wench
stranger     scurvy dog
officer     foul blaggart
where     whar
is     be
are     be
am     be
the     th'
you     ye
your     yer
tell     be tellin'

Heres your answer. Run it in on your pc.
public class Annoy
public static void main(String[] args)
   System.out.println("I am a triple poster.");
   System.out.println("I can not understand why I can not understand the help I have receved to date on the java forums.");
}

Please help me with this

please help me with this
i brought sony z3 dual last month
since i brought i noticed that when typing there is problem with screen touch system ,as there is specific letters not typing correctly
first i thought its from screen sticker came with the phone ,, so i used with it ,, but after 2 weeks i remove the screen sticker ,and installed new one which came with the phone , but the problem with typing still there
i did screen touch test i found that there is longitudinal area not responding to the tough test correctly
here is the test
https://youtu.be/CMxgGSIMBlo
https://youtu.be/TS1UJefEQzg
http://store2.up-00.com/2015-06/1434177638124.png
http://store2.up-00.com/2015-06/1434177637893.png
[url=http://www.up-00.com/?5aBg]http://www.up-00.com/?5aBg[/url][URL="http://www.up-00.com/"][/URL]
[url=http://www.up-00.com/?8aBg]http://www.up-00.com/?8aBg[/url][URL="http://www.up-00.com/"][/URL]
[url=http://www.up-00.com/][img]http://store2.up-00.com/2015-06/1434177637893.png[/img][/url][URL="http:/...
[url=http://www.up-00.com/][img]http://store2.up-00.com/2015-06/1434177638124.png[/img][/url][URL="http:/...
please any help
its a new phone age only a month
is it factory problem or software ???

@Asef1
here is the link
http://support.sonymobile.com/global-en/contactUs/
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Hi Everyone...Please help me with this query...!

Please Help me with this doubt as I am unable to understand the logic...behind this code. It's a begineer level code but I need to understand the logic so that I am able to grasp knowledge. Thank you all for being supportive. Please help me.
//Assume class Demo is inherited from class SuperDemo...in other words class Demo extends SuperDemo
//Volume is a method declared in SuperDemo which returns an integer value
//weight is an integer vairable declared in the subclass which is Demo
class Example
     public static void main(String qw[])
          Demo ob1=new Demo(3,5,7,9);
//Calling Constructor of Demo which takes in 4 int parameters
          SuperDemo ob2=new SuperDemo();
          int vol;
          vol=ob1.volume();
          System.out.println("Volume of ob1 is " + vol);
          System.out.println("Weight of ob1 is " + ob1.weight);
          System.out.println();
          ob2=ob1;
}Can someone please make me understand --- how is this possible and why !
If the above statement is valid then why not this one "System.out.println(ob2.weight);"
Thanks Thanks Thanks!

u see the line wherein I am referencing the objectof
a subclass to the superclass...right? then why we
can't do System.out.println(ob2.weight)?You need to distinguish two things:
- the type of the object, which determines with the
object can do
- the type of the reference to the object, which
determines what you see that you can do
Both don't necessarily have to match. When you use a
SuperDemo reference (obj2) to access a Demo instance
(obj1), for all you know, the instance behind obj2 is
of type SuperDemo. That it's in reality of type Demo
is unknown to you. And usually, you don't care -
that's what polymorphism is about.
So you have a reference obj2 of type SuperDemo.
SuperDemo objects don't have weight, so you don't see
it - even though it is there.So from ur explanation wat I understand is - Even though u reference a subclass object to a superclass, u will only be able to access the members which are declared in the superclass thru the same...right
?

Please help me with spry bar menu

I have laid out my page with the div tags in Dreamweaver. I defined the different sections by putting colors in them until i am ready to put stuff into them however when i insert the spry menu bar into my navigation section, the area below it is behaving like a drop down box of color. What i mean is that the area below which is supposed to stretch from left to right as a single box is now broken up by a different color box the width of the spry bar and goes down to the next box. When i preview it in the browser the page appears normal. How can i get rid of the intruding box in dreamweaver.

HI
I am practicing for the webmaster design course pratical exam. The web page i will be asked to construct will consist of a home page with two or three other pages pages in the site it will have to link to. I know how to do most of the steps individualy but i do not know in what order some of them are done. What i mean is this. ... after setting up the root folder..images..laying out the divs .. i would like to know ... at what point do i do the various things like, set up a styles folder...make a template... make the other pages of the site ..etc. I think i am able to do nearly all of these things but not sure in what order they should be done so the site will work.
I have reached the point where i have established the site and layout, i.e. the wrapper, logo, navigation,header,bodycontent,right and left columns, clearbar, footer. i would like someone to list the sequence i should follow after this. I am praticing on a trial CS5.5 which seems to simplfy to a freat extent what we learned on the course because it is a later version. The version we used on course was CS4 and if the pratical is in this version then i will need to know how it is done in this format.
Date: Sun, 22 Jan 2012 17:45:18 -0700
From: [email protected]
To: [email protected]
Subject: Please help me with spry bar menu
Re: Please help me with spry bar menu created by Nancy O. in Dreamweaver - View the full discussion
If this only happens in DW Design View, use Live View or turn off your CSS display.
View > Style Rendering > un-tick Display Styles.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4157994#4157994
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4157994#4157994. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Dreamweaver by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Please help ... have new samsung ativ se windows 8 phone ... screen lock is on to require password, but on incoming calls its not locked ... how do i lock it for incoming calls too ???? thanks

please help ... have new samsung ativ se windows 8 phone ... screen lock is on to require password, but on incoming calls its not locked ... how do i lock it for incoming calls too ???? thanks

Personal rant, why do people write the entire problem in topic line
It's not possible with Windows Phone 8. What's the point, a call is coming in and the phone allows you to answer.

Please help me with my new g3 beige :D

Similar Messages

Maybe you are looking for