Please help me with Powershell Script - Message Box to display after Installation
Hi Guys,
Am using package model to deploy the software. After installation on client machines i want to display a dialog box to notify the successful installation.
Currently trying VBScript to show the dialog message.
But few machines i get this dialog and few machines am not getting, in program command line am calling a batch script.
Now am planning to use a Power shell scripting to show a message box and trying to call it through a batch script.
Please assist me with the powershell script which will display a message box like above
(and let me know in script how to enable the set-execution policy Remote signed enabled)
Thanks,
You can set the execution settings from within the client settings.
For a simple message box without having to load assmemblies
$wshell = New-Object -ComObject Wscript.Shell
$wshell.Popup("Operation Completed",0,"Done",0x1)
Similar Messages
-
I was organizing my contatcs when suddenly it disappeared and got this error message.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if iTunes crashed, you would enter "iTunes" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful. -
Moving folders. Please help me with my script!
Pretty much I'm making a script that facilitates moving files into other files that are in other files and so on. First of all, I ask how many folders are within that folder. Example: Folder 1:Folder 2: Folder 3: Final Destination of Folder that wants to be moved. Then depending on the amount of folders that are within eachother, I will ask them the name of each folder so I know the file path to the destination of the folder that wants to be moved. I will then move the chosen folder to its destination. This is my script so far:
set theAmount to the text returned of (display dialog "Is there a folder within that folder, if so how many folders are there?" default answer "")
if theAmount is 1 then set theName1 to the text returned of (display dialog "What is the name of the folder you want to move?" default answer "")
if theAmount is 1 then set theDestination1 to the text returned of (display dialog "What is the name of the folder you want to move it to?" default answer "")
if theAmount is 1 then tell application "Finder"
move folder theName1 to folder theDestination1
end tell
if theAmount is 2 then set theName1 to the text returned of (display dialog "What is the name of the folder you want to move?" default answer "")
if theAmount is 2 then set theDestination1 to the text returned of (display dialog "What is the name of the folder that contains the folder that you want to move to?" default answer "")
if theAmount is 2 then set theDestination2 to the text returned of (display dialog "What is the name of the folder that is the final destination?" default answer "")
if theAmount is 2 then tell application "Finder"
move folder theName1 to (folder theDestination1) + ":" + theDestination2
end tell
Problem 1: It asks me the first question then nothing happens.
Problem 2: I would like to make it so that I don't have to keep repeating "if theAmount is X then ask him the name of the folder it's in X amount of times."
I appreciate any help, thanks!Without seeing your original source setup, it's hard to know quite how to set this up, but...
Why are you asking the user these questions at all? Let me explain...
Given a designated folder:
set theFolder to (choose folder)
You can find out yourself how many folders there are within it:
tell application "Finder"
set theAmount to count folders of folder theFolder
end tell
So, for one, you don't need to ask the user how many folders there are - you already know (although you can still ask if you want).
More importantly, though, you don't have to rely on the user knowing the folder names (and typing them correctly). Give the user the ability to choose from a list:
tell application "Finder"
set folder_list to name of folders of folder theFolder
set theAmount to count folder_list
set theName to choose from list folder_list with prompt "Which folder do you want to move?"
set theDestination to choose from list folder_list with prompt "Where do you want to move it?"
end tell
Finally your move statement isn't going to work.
move folder theName1 to folder theDestination1
In your original code, the user is likely (I assume) to enter the folder names (e.g. "Foo" and "Bar") which will translate into:
move folder "Foo" to folder "Bar"
The Finder is going to choke on this - it can't find folder "Foo" (or "Bar") since there isn't enough data there - these strings are not paths, they're just names of folders - and if you're expecting the user to type full paths each time... well, good luck
The Finder is going to want proper paths to the folders in order to make the moves. You can do this by appending the folder names to the original folder object, e.g.:
move (folder theName of theFolder) to (folder theDestination of theFolder)
Although now you're moving a folder out of the source directory, and there's nothing to stop the user from re-selecting the same folder name next time around. You can get around that with a loop but, again, not knowing your ultimate goal here, it's not easy to be precise. -
Please help me with this error message
when I try to restore/update my iPod I get this error message:
"There was a problem downloading the iPod software for the iPod "_______". You do not have enough access priviledges for this operation.
Make sure your network settings are correct and your netwrok conection is active, or try again later."when I try to restore/update my iPod I get this error message:
"There was a problem downloading the iPod software for the iPod "_______". You do not have enough access priviledges for this operation.
Make sure your network settings are correct and your netwrok conection is active, or try again later." -
Please help me with this error I keep getting for attachments
please help me with my error message as I can't download attachments
Some information would be helpful... operating system, email client, Reader version, error message, ...
-
Please help me with this calculation script
Hello everyone.
I have 2 fields named A and B. FieldA is user-enter value and FieldB is calculated. I want to write a script that do the following:
If FieldA is more than or equal to $10000, then FieldB always is $1000, Else FieldB = FieldA * 10%.
I don't know about scripting; however, after hour of search through google, I wrote this one:
var tvar
If (tvar >= 10000)then deposit.value = 1000
else deposit.value = total.rawValue*0.01
endif
And when I try to run, it say "Invalid Property Set Operation, value doesn't have a default property."
I know my script is bad and over the place. Can anyone please help me with this problem ASAP. Thank you so much, I'm in your debt.
I used Adobe LiveCycle Designer to create a PDF file.Thank you for your response.
tvar = total
At first I wrote it like this:
If (total.rawValue >= 10000)then deposit.rawvalue = 1000
else deposit.rawvalue = total.rawValue*0.01
endif
then I get an error message "accessor 'Total.rawValue' is unknown"
Hic, I think my script is screwed. Can you help me start fresh :)
Thank again. -
Please help me with this "2012 R2" PS Script
Please be kind to help me with this Script. Thank you.....
Import-Csv C:\Scripts\NewADUsers.csv | foreach-object { $userprinicpalname = $_.SamAccountName + "@{loona}.com"; New-ADUser -SamAccountName $_.SamAccountName -UserPrincipalName $userprinicpalname -Name $_.name -DisplayName $_.name -GivenName
$_.cn -SurName $_.sn -Description $_.Description -Department $_.Department -Path $_.path -AccountPassword (ConvertTo-SecureString "Loona123" -AsPlainText -force) -Enable $True -PasswordNeverExpires $Ture -PassThru }
New-ADUser : Directory object not found
At line:1 char:114
+ Import-Csv C:\Scripts\NewADUsers.csv | foreach-object { $userprinicpalname = $_. ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : ObjectNotFound: (CN=Student01,OU...DC=loona,DC=com:String) [New-ADUser], ADIdentityNotFoundException
+ FullyQualifiedErrorId : ActiveDirectoryCmdlet:Microsoft.ActiveDirectory.Management.ADIdentityNotFoundException,Microsoft.Activ
eDirectory.Management.Commands.NewADUserPlease check it the caractors - + =. i have no idea about PowerShell
ImportCsv C:\Scripts\NewADUsers.csv |
ForEach-Object{
$props=@{
SamAccountName=$_.SamAccountName
UserPrincipalName=$_.SamAccountName + '@loona.com'
Name=$_.name
DisplayName=$_.name
GivenName=$_.cn
SurName=$_.sn
Description=$_.Description
Department=$_.Department
Path=$_.path
AccountPassword=(ConvertTo-SecureString "Loona123" -AsPlainText -force)
Enabled=$True
PasswordNeverExpires=$true
NewObject @orops -PassThru -
I have unlocked my iphone and when tried to upgrade it, i got an error, so i restored it.But i was not able to activate my iphone 3gs now...it is showing a message like ' sim card not found'..please help me with this regard
Try popping out the SIM card and turn off the phone.
Pop in the SIM card once again and turn on the phone, make sure that the SIM card is placed and seated perfectly in the tray!
Tell me how did you unlock your phone!? -
PLEASE HELP ME. Some important emails have gone to an archive mail box and i really need them. Can someone please help me with how to view the archive email box and the emails that are in there?
http://kb.mozillazine.org/Recovering_deleted_mail_accounts
-
Please help me with the following two questions, very urgent
Hi All,
Please help me with some scenerios about what are the common problems when modifying a standard script such a standard Invoice script and how can we overcome them.
What are the common problems encountered when working with SAP SMARTFORMS and how to overcome them?
Please help me with these questions, its very urgent.
Thanks in advance.
MD.hi
hope it will help you.
reward if ehlp.
How to create a New smartfrom, it is having step by step procedure
http://sap.niraj.tripod.com/id67.html
step by step good ex link is....
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
Here is the procedure
1. Create a new smartforms
Transaction code SMARTFORMS
Create new smartforms call ZSMART
2. Define looping process for internal table
Pages and windows
First Page -> Header Window (Cursor at First Page then click Edit -> Node -> Create)
Here, you can specify your title and page numbering
&SFSY-PAGE& (Page 1) of &SFSY-FORMPAGES(Z4.0)& (Total Page)
Main windows -> TABLE -> DATA
In the Loop section, tick Internal table and fill in
ITAB1 (table in ABAP SMARTFORM calling function) INTO ITAB2
3. Define table in smartforms
Global settings :
Form interface
Variable name Type assignment Reference type
ITAB1 TYPE Table Structure
Global definitions
Variable name Type assignment Reference type
ITAB2 TYPE Table Structure
4. To display the data in the form
Make used of the Table Painter and declare the Line Type in Tabstrips Table
e.g. HD_GEN for printing header details,
IT_GEN for printing data details.
You have to specify the Line Type in your Text elements in the Tabstrips Output options.
Tick the New Line and specify the Line Type for outputting the data.
Declare your output fields in Text elements
Tabstrips - Output Options
For different fonts use this Style : IDWTCERTSTYLE
For Quantity or Amout you can used this variable &GS_ITAB-AMOUNT(12.2)&
5. Calling SMARTFORMS from your ABAP program
REPORT ZSMARTFORM.
Calling SMARTFORMS from your ABAP program.
Collecting all the table data in your program, and pass once to SMARTFORMS
SMARTFORMS
Declare your table type in :-
Global Settings -> Form Interface
Global Definintions -> Global Data
Main Window -> Table -> DATA
Written by : SAP Hints and Tips on Configuration and ABAP/4 Programming
http://sapr3.tripod.com
TABLES: MKPF.
DATA: FM_NAME TYPE RS38L_FNAM.
DATA: BEGIN OF INT_MKPF OCCURS 0.
INCLUDE STRUCTURE MKPF.
DATA: END OF INT_MKPF.
SELECT-OPTIONS S_MBLNR FOR MKPF-MBLNR MEMORY ID 001.
SELECT * FROM MKPF WHERE MBLNR IN S_MBLNR.
MOVE-CORRESPONDING MKPF TO INT_MKPF.
APPEND INT_MKPF.
ENDSELECT.
At the end of your program.
Passing data to SMARTFORMS
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'ZSMARTFORM'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
if sy-subrc <> 0.
WRITE: / 'ERROR 1'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function FM_NAME
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
GS_MKPF = INT_MKPF
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Smartform
you can check this link here you can see the steps and you can do it the same by looking at it..
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
SMARTFORMS STEPS.
1. In Tcode se11 Create a structure(struct) same like the Internal table that you are going to use in your report.
2. Create Table type(t_struct) of stracture in se11.
3. In your program declare Internal table(Itab) type table of structure(struct).
4. Define work area(wa) like line of internal table.
5. Open Tcode Smartforms
6. In form Global setting , forminterface Import parameter define Internal table(Itab) like table type of stracture(t_struct).
7. In form Global setting , Global definitions , in Global data define Work area(wa) like type stracture(struct).
8. In form pages and window, create Page node by default Page1 is available.
9. In page node you can create numbers of secondary window. But in form there is only one Main window.
10. By right click on page you can create windows or Go to Edit, Node, Create.
11. After creating the window right click on window create table for displaying the data that you are passing through internal table.
12. In the table Data parameter, loop internal internal table (Itab) into work area(wa).
13. In table there are three areas Header, Main Area, Footer.
14. Right click on the Main area create table line by default line type1 is there select it.
15. Divide line into cells according to your need then for each cell create Text node.
16. In text node general attribute. Write down fields of your work area(wa) or write any thing you want to display.
17. Save form and activate it.
18. Then go to Environment, function module name, there you get the name of function module copy it.
19. In your program call the function module that you have copied from your form.
20. In your program in exporting parameter of function pass the internal table(itab).
SAP Smart Forms is introduced in SAP Basis Release 4.6C as the tool for creating and maintaining forms.
SAP Smart Forms allow you to execute simple modifications to the form and in the form logic by using simple graphical tools; in 90% of all cases, this won't include any programming effort. Thus, a power user without any programming knowledge can
configure forms with data from an SAP System for the relevant business processes.
To print a form, you need a program for data retrieval and a Smart Form that contains the entire from logic. As data retrieval and form logic are separated, you must only adapt the Smart Form if changes to the form logic are necessary. The application program passes the data via a function module interface to the Smart Form. When activating the Smart Form, the system automatically generates a function module. At runtime, the system processes this function module.
You can insert static and dynamic tables. This includes line feeds in individual table cells, triggering events for table headings and subtotals, and sorting data before output.
You can check individual nodes as well as the entire form and find any existing errors in the tree structure. The data flow analysis checks whether all fields (variables) have a defined value at the moment they are displayed.
SAP Smart Forms allow you to include graphics, which you can display either as part of the form or as background graphics. You use background graphics to copy the layout of an existing (scanned) form or to lend forms a company-specific look. During printout, you can suppress the background graphic, if desired.
SAP Smart Forms also support postage optimizing.
Also read SAP Note No. 168368 - Smart Forms: New form tool in Release 4.6C
What Transaction to start SAP Smart Forms?
Execute transaction SMARTFORMS to start SAP Smart Forms.
Key Benefits of SAP Smart Forms:
SAP Smart Forms allows you to reduce considerably the implementation costs of mySAP.com solutions since forms can be adjusted in minimum time.
You design a form using the graphical Form Painter and the graphical Table Painter. The form logic is represented by a hierarchy structure (tree structure) that consists of individual nodes, such as nodes for global settings, nodes for texts, nodes for output tables, or nodes for graphics.
To make changes, use Drag & Drop, Copy & Paste, and select different attributes.
These actions do not include writing of coding lines or using a Script language.
Using your form description maintained in the Form Builder, Smart Forms generates a function module that encapsulates layout, content and form logic. So you do not need a group of function modules to print a form, but only one.
For Web publishing, the system provides a generated XML output of the processed form.
Smart Forms provides a data stream called XML for Smart Forms (XSF) to allow the use of 3rd party printing tools. XSF passes form content from R/3 to an external product without passing any layout information about the Smart Form.
SmartForms System Fields
Within a form you can use the field string SFSY with its system fields. During form processing the system replaces these fields with the corresponding values. The field values come from the SAP System or are results of the processing.
System fields of Smart Forms
&SFSY-DATE&
Displays the date. You determine the display format in the user master record.
&SFSY-TIME&
Displays the time of day in the form HH:MM:SS.
&SFSY-PAGE&
Inserts the number of the current print page into the text. You determine the format of the page number (for example, Arabic, numeric) in the page node.
&SFSY-FORMPAGES&
Displays the total number of pages for the currently processed form. This allows you to include texts such as'Page x of y' into your output.
&SFSY-JOBPAGES&
Contains the total page number of all forms in the currently processed print request.
&SFSY-WINDOWNAME&
Contains the name of the current window (string in the Window field)
&SFSY-PAGENAME&
Contains the name of the current page (string in the Page field)
&SFSY-PAGEBREAK&
Is set to 'X' after a page break (either automatic [Page 7] or command-controlled [Page 46])
&SFSY-MAINEND&
Is set as soon as processing of the main window on the current page ends
&SFSY-EXCEPTION&
Contains the name of the raised exception. You must trigger your own exceptions, which you defined in the form interface, using the user_exception macro (syntax: user_exception <exception name >).
Example Forms Available in Standard SAP R/3
SF_EXAMPLE_01
Simple example; invoice with table output of flight booking for one customer
SF_EXAMPLE_02
Similar to SF_EXAMPLE_01 but with subtotals
SF_EXAMPLE_03
Similar to SF_EXAMPLE_02, whereby several customers are selected in the application program; the form is called for each customer and all form outputs are included in an output request
Advantages of SAP Smart Forms
SAP Smart Forms have the following advantages:
1. The adaption of forms is supported to a large extent by graphic tools for layout and logic, so that no programming knowledge is necessary (at least 90% of all adjustments). Therefore, power user forms can also make configurations for your business processes with data from an SAP system. Consultants are only required in special cases.
2. Displaying table structures (dynamic framing of texts)
3. Output of background graphics, for form design in particular the use of templates which were scanned.
4. Colored output of texts
5. User-friendly and integrated Form Painter for the graphical design of forms
6. Graphical Table Painter for drawing tables
7. Reusing Font and paragraph formats in forms (Smart Styles)
8. Data interface in XML format (XML for Smart Forms, in short XSF)
9. Form translation is supported by standard translation tools
10. Flexible reuse of text modules
11. HTML output of forms (Basis release 6.10)
12. Interactive Web forms with input fields, pushbuttons, radio buttons, etc. (Basis-Release 6.10) -
Please help me with spry bar menu
I have laid out my page with the div tags in Dreamweaver. I defined the different sections by putting colors in them until i am ready to put stuff into them however when i insert the spry menu bar into my navigation section, the area below it is behaving like a drop down box of color. What i mean is that the area below which is supposed to stretch from left to right as a single box is now broken up by a different color box the width of the spry bar and goes down to the next box. When i preview it in the browser the page appears normal. How can i get rid of the intruding box in dreamweaver.
HI
I am practicing for the webmaster design course pratical exam. The web page i will be asked to construct will consist of a home page with two or three other pages pages in the site it will have to link to. I know how to do most of the steps individualy but i do not know in what order some of them are done. What i mean is this. ... after setting up the root folder..images..laying out the divs .. i would like to know ... at what point do i do the various things like, set up a styles folder...make a template... make the other pages of the site ..etc. I think i am able to do nearly all of these things but not sure in what order they should be done so the site will work.
I have reached the point where i have established the site and layout, i.e. the wrapper, logo, navigation,header,bodycontent,right and left columns, clearbar, footer. i would like someone to list the sequence i should follow after this. I am praticing on a trial CS5.5 which seems to simplfy to a freat extent what we learned on the course because it is a later version. The version we used on course was CS4 and if the pratical is in this version then i will need to know how it is done in this format.
Date: Sun, 22 Jan 2012 17:45:18 -0700
From: [email protected]
To: [email protected]
Subject: Please help me with spry bar menu
Re: Please help me with spry bar menu created by Nancy O. in Dreamweaver - View the full discussion
If this only happens in DW Design View, use Live View or turn off your CSS display.
View > Style Rendering > un-tick Display Styles.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4157994#4157994
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4157994#4157994. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Dreamweaver by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
Please Help me with the error P6
I recently installed the Primavera P6 but when I started
using it for the first time I get the following error
message :
C:\Program files\Primavera\Project
Management\Languages\comCaptions.en-us
<br
/>Please help me with this error ;
ThanksHi,
This sounds like an issue
that might best be handled by support. You can find
information on contacting support here:<br
/><br
/>http://www.primavera.com/customer/support.asp<br
/>
Thanks,
Sean -
Please help me with the proper query for the below problem
Hi,
I have a table RATE which have two columns RT_DATE (date) and RATES(number).
This table have following data.
RT_DATE
RATES
1-JAN-2007
7
2-MAR-2008
7.25
5-JAN-2009
8
8-NOV-2009
8.5
9-JUN-2010
9
I wanted to get the rate of interest on 8-DEC-2009.
Output will be 8.5 as this given date is in between 8-NOV-2009 and 9-JUN-2010. Could you please help me with proper query?
Regards,
Aparna SHi,
That sounds like a job for the LAST function:
SELECT MIN (rates) KEEP (DENSE_RANK LAST ORDER BY rt_date) AS eff_rate
FROM rate
WHERE rt_date < 1 + DATE '2009-12-08'
MIN above means that, in case of a tie (that is, 2 or more rows with the exact same latest rt_date) the lowest rates from that latest rt_date will be returned. In rt_date is unique, then it doesn't matter if you use MIN or MAX, but syntax demands that you use some aggregate function there.
I hope this answers your question.
If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for your sample data, and also post the results you want from that data.
Point out where the statement above is getting the wrong results, and explain, using specific examples, how you get the right results from the given data in those places.
Always say which version of Oracle you're using (e.g., 11.2.0.2.0).
See the forum FAQ: https://forums.oracle.com/message/9362002#9362002 -
Please help me with this error: "Apple application support was not found... Error 2"
Can anyone please help me with this error: "Apple application support was not found... Error 2"
I've followed the instructions by removing all Apple files from my laptop, but when I reinstall the iTunes software it still comes up with this message:
"Apple application support is required to run iTunesHelper. Please uninstall iTunes, then install iTunes again. Error 2"
Thank youiTunes "Apple Application Support is required... Error 2" and possible fix.
I know this is a bit late but I came accross this thread trying to resolve this same problem and came up with a solution that worked for me, so thought I would share it here too. I hope it helps someone else.
I just resolved this on Win Vista (should apply equally for Win7 too). Please uninstall iTunes before proceeding though. I'll walk you through the process I followed, if you like you can jump straight to the Solution section.
Problems:
The initial error during the installation of iTunes was:
An error occurred during the installation of assembly 'Microsoft.VC80.CRT,version="8.0.50727.4053",type="win32",publicKeyToken='1fc8b 3b9a1e18e3b",processorarchitecture="x86". Please refer to Help and Support for more information. HRESULT:0x8007054F
The error (after installing iTunes) when trying to run iTunes was:
Apple Application Support is required to run iTunes. Please uninstall iTunes, then install iTunes again. Error 2 (Windows error 2).
After trying various fixes around the forums I came across this MSKB article, which relates to the first installation error:
http://support.microsoft.com/kb/2688946
This lead me to trying to install MS Visual C++ but I received the following error trying to install that:
Error 1935.An error occurred during the installation of assembly ‘Microsoft.VC80.ATL,type=”win32”,version=”8.0.50727.762”,publicKeyToken=”1fc8b3 b9a1e18e3b”,processorArchitecture=”amd64”’. Please refer to Help and Support for more information. HRESULT: 0x80070BC9. Assembly interface: IassemblyCacheItem, function: Commit, component: {837BF1EB-D770-94EB-A01F-C8B3B9A1E18E}
Note: The installation of VC++ rolls back when it fails.
Solution:
Through this error I found this MSKB article:
http://support.microsoft.com/kb/946414
The Automated MS "Fix It" msi package didn’t work.
Note: Please backup your registry first (see the above MSKB article for instructions).
I opened the registry and (as instructed in the MSKB article) deleted the following keys:
HKEY_LOCAL_MACHINE\COMPONENTS\
PendingXmlIdentifier
NextQueueEntryIndex
AdvancedInstallersNeedResolving
Reboot and reinstall iTunes.
If it helps you please like this so others can find it. -
Please Help me with this Logic.....
Seniors , Please Help me with this Requirment
BUKRS _____________________
GJAHR ____________________
LIFNR _____________________
MONAT _____________________
LIFNR NAME1 GSBER GJAHR HBAL SBAL ACCUMBAL
1001 ABB BUSS1 2005 300 00
ABB BUSS1 2005 00 100
300 100 (300-100)=200
ABB BUSS1 2006 200 00
ABB BUSS1 2006 200 00
400 00 (400-00)+ 200 =
600
ABB BUSS2 2005 300 00
ABB BUSS2 2005 00 100
300 100 ( 300-100) =200
ABB BUSS2 2006 400 00
ABB BUSS2 2006 00 100
400 100 (400-100)+200 =
500 ****************************************************************************
1400 300 (1400-300) **********************************************************************************************************
Same for the Next Vendor also...
This is the report for this Requirment i am working on....Please Help me in the Logic..How to Go on with it....
*& Report ZVENDOR_RECONCILLATION
REPORT ZVENDOR_RECONCILLATION.
TABLES : BSAK , BSIK , LFC1 , LFC3 , LFA1.
*ALV
TYPE-POOLS: SLIS.
*TYPE-POOLS icon.
DATA: It_SORT TYPE SLIS_T_SORTINFO_ALV ."WITH HEADER LINE.
DATA: TOP TYPE slis_t_listheader,
END TYPE slis_t_listheader,
EVENTS TYPE slis_t_event.
DATA : T_KEY TYPE SLIS_KEYINFO_ALV.
DATA : FIELDCAT TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE,
LAYOUT TYPE SLIS_LAYOUT_ALV OCCURS 1 WITH HEADER LINE ,
LCAT TYPE SLIS_FIELDCAT_ALV.
*INTERNAL TABLE
DATA: BEGIN OF sd_bsak,
bukrs TYPE bsak-bukrs,
lifnr TYPE bsak-lifnr,
umsks TYPE bsak-umsks,
umskz TYPE bsak-umskz,
augdt TYPE bsak-augdt,
augbl TYPE bsak-augbl,
zuonr TYPE bsak-zuonr,
gjahr TYPE bsak-gjahr,
belnr TYPE bsak-belnr,
buzei TYPE bsak-buzei,
budat TYPE bsak-budat,
bldat TYPE bsak-bldat,
xblnr TYPE bsak-xblnr,
blart TYPE bsak-blart,
monat TYPE bsak-monat,
bschl TYPE bsak-bschl,
zumsk TYPE bsak-zumsk,
shkzg TYPE bsak-shkzg,
gsber TYPE bsak-gsber,
dmbtr TYPE bsak-dmbtr,
wrbtr TYPE bsak-wrbtr,
sgtxt TYPE bsak-sgtxt,
saknr TYPE bsak-saknr,
hkont TYPE bsak-hkont,
END OF sd_bsak.
DATA: BEGIN OF sd_bsik,
bukrs TYPE bsik-bukrs,
lifnr TYPE bsik-lifnr,
umsks TYPE bsik-umsks,
umskz TYPE bsik-umskz,
augdt TYPE bsik-augdt,
augbl TYPE bsik-augbl,
zuonr TYPE bsik-zuonr,
gjahr TYPE bsik-gjahr,
belnr TYPE bsik-belnr,
buzei TYPE bsik-buzei,
budat TYPE bsik-budat,
bldat TYPE bsik-bldat,
xblnr TYPE bsik-xblnr,
blart TYPE bsik-blart,
monat TYPE bsik-monat,
bschl TYPE bsik-bschl,
zumsk TYPE bsik-zumsk,
shkzg TYPE bsik-shkzg,
gsber TYPE bsik-gsber,
dmbtr TYPE bsik-dmbtr,
wrbtr TYPE bsik-wrbtr,
sgtxt TYPE bsik-sgtxt,
saknr TYPE bsik-saknr,
hkont TYPE bsik-hkont,
zlsch TYPE bsik-zlsch,
END OF sd_bsik.
DATA: BEGIN OF it_lfa1,
lifnr TYPE lfa1-lifnr,
name1 TYPE lfa1-name1,
END OF it_lfa1.
*FINAL INTERNAL TABLE DECLARATION
DATA: BEGIN OF IT_FINAL,
lifnr TYPE bsak-lifnr,
gsber TYPE bsak-gsber,
bukrs TYPE bsak-bukrs,
umsks TYPE bsak-umsks,
umskz TYPE bsak-umskz,
augdt TYPE bsak-augdt,
augbl TYPE bsak-augbl,
zuonr TYPE bsak-zuonr,
gjahr TYPE bsak-gjahr,
belnr TYPE bsak-belnr,
buzei TYPE bsak-buzei,
budat TYPE bsak-budat,
bldat TYPE bsak-bldat,
xblnr TYPE bsak-xblnr,
blart TYPE bsak-blart,
monat TYPE bsak-monat,
bschl TYPE bsak-bschl,
zumsk TYPE bsak-zumsk,
shkzg TYPE bsak-shkzg,
gsber TYPE bsak-gsber,
dmbtr TYPE bsak-dmbtr,
wrbtr TYPE bsak-wrbtr,
sgtxt TYPE bsak-sgtxt,
saknr TYPE bsak-saknr,
hkont TYPE bsak-hkont,
DMBTR_S TYPE BSAK-DMBTR,
DMBTR_H TYPE BSAK-DMBTR,
DS TYPE P DECIMALS 2,
DH TYPE P DECIMALS 2,
SUB TYPE P DECIMALS 2,
ADD TYPE P DECIMALS 2,
BAL TYPE P DECIMALS 2,
lifnr TYPE bsik-lifnr,
umsks TYPE bsik-umsks,
umskz TYPE bsik-umskz,
augdt TYPE bsik-augdt,
augbl TYPE bsik-augbl,
zuonr TYPE bsik-zuonr,
gjahr TYPE bsik-gjahr,
belnr TYPE bsik-belnr,
buzei TYPE bsik-buzei,
budat TYPE bsik-budat,
bldat TYPE bsik-bldat,
xblnr TYPE bsik-xblnr,
blart TYPE bsik-blart,
monat TYPE bsik-monat,
bschl TYPE bsik-bschl,
zumsk TYPE bsik-zumsk,
shkzg TYPE bsik-shkzg,
gsber TYPE bsik-gsber,
dmbtr TYPE bsik-dmbtr,
wrbtr TYPE bsik-wrbtr,
sgtxt TYPE bsik-sgtxt,
saknr TYPE bsik-saknr,
hkont TYPE bsik-hkont,
zlsch TYPE bsik-zlsch,
lifnr TYPE lfa1-lifnr,
name1 TYPE lfa1-name1,
END OF IT_FINAL.
DATA: BEGIN OF SD_FINAL,
gsber TYPE bsak-gsber,
lifnr TYPE bsak-lifnr,
bukrs TYPE bsak-bukrs,
lifnr TYPE bsak-lifnr,
umsks TYPE bsak-umsks,
umskz TYPE bsak-umskz,
augdt TYPE bsak-augdt,
augbl TYPE bsak-augbl,
zuonr TYPE bsak-zuonr,
gjahr TYPE bsak-gjahr,
belnr TYPE bsak-belnr,
buzei TYPE bsak-buzei,
budat TYPE bsak-budat,
bldat TYPE bsak-bldat,
xblnr TYPE bsak-xblnr,
blart TYPE bsak-blart,
monat TYPE bsak-monat,
bschl TYPE bsak-bschl,
zumsk TYPE bsak-zumsk,
shkzg TYPE bsak-shkzg,
dmbtr TYPE bsak-dmbtr,
wrbtr TYPE bsak-wrbtr,
sgtxt TYPE bsak-sgtxt,
saknr TYPE bsak-saknr,
hkont TYPE bsak-hkont,
bukrs TYPE bsik-bukrs,
lifnr TYPE bsik-lifnr,
umsks TYPE bsik-umsks,
umskz TYPE bsik-umskz,
augdt TYPE bsik-augdt,
augbl TYPE bsik-augbl,
zuonr TYPE bsik-zuonr,
gjahr TYPE bsik-gjahr,
belnr TYPE bsik-belnr,
buzei TYPE bsik-buzei,
budat TYPE bsik-budat,
bldat TYPE bsik-bldat,
xblnr TYPE bsik-xblnr,
blart TYPE bsik-blart,
monat TYPE bsik-monat,
bschl TYPE bsik-bschl,
zumsk TYPE bsik-zumsk,
shkzg TYPE bsik-shkzg,
gsber TYPE bsik-gsber,
dmbtr TYPE bsik-dmbtr,
wrbtr TYPE bsik-wrbtr,
sgtxt TYPE bsik-sgtxt,
saknr TYPE bsik-saknr,
hkont TYPE bsik-hkont,
zlsch TYPE bsik-zlsch,
lifnr TYPE lfa1-lifnr,
name1 TYPE lfa1-name1,
line_color(4) TYPE c,
END OF SD_FINAL.
DATA IT_STD_BSAK LIKE TABLE OF SD_BSAK WITH HEADER LINE.
DATA IT_STD_BSIK LIKE TABLE OF SD_BSIK WITH HEADER LINE.
DATA IT_STD_LFA1 LIKE TABLE OF IT_LFA1 WITH HEADER LINE.
DATA IT_STD_FINAL LIKE TABLE OF IT_FINAL WITH HEADER LINE.
DATA IT_FINAL_DISPLAY LIKE TABLE OF SD_FINAL WITH HEADER LINE.
*SELECTION-SCREEN
SELECTION-SCREEN BEGIN OF BLOCK HEADER WITH FRAME TITLE TEXT-001.
PARAMETERS: P_BUKRS LIKE BSAK-BUKRS OBLIGATORY.
SELECT-OPTIONS : S_GJAHR FOR BSAK-GJAHR.
SELECT-OPTIONS: S_LIFNR FOR BSAK-LIFNR.
SELECT-OPTIONS: S_MONAT FOR BSAK-MONAT.
SELECTION-SCREEN END OF BLOCK HEADER.
START-OF-SELECTION.
SET PF-STATUS 'STATUS'.
PERFORM DATA_RETRIVAL.
PERFORM FIELD.
PERFORM EVENTS USING EVENTS.
PERFORM EVENTS_1 USING EVENTS.
PERFORM HEADER USING TOP.
PERFORM LAYOUT.
PERFORM DISPLAY.
END-OF-PAGE.
*& Form DATA_RETRIVAL
text
--> p1 text
<-- p2 text
FORM DATA_RETRIVAL .
SELECT BUKRS LIFNR UMSKS UMSKZ AUGDT AUGBL ZUONR GJAHR BELNR BUZEI BUDAT BLDAT XBLNR BLART
MONAT BSCHL ZUMSK SHKZG GSBER DMBTR WRBTR SGTXT SAKNR HKONT
FROM BSAK INTO TABLE IT_STD_BSAK
WHERE BUKRS = P_BUKRS
AND GJAHR IN S_GJAHR
AND LIFNR IN S_LIFNR
AND MONAT IN S_MONAT.
IF NOT IT_STD_BSAK[] IS INITIAL.
SELECT BUKRS LIFNR UMSKS UMSKZ AUGDT AUGBL ZUONR GJAHR BELNR BUZEI BUDAT BLDAT XBLNR
BLART MONAT BSCHL ZUMSK SHKZG GSBER DMBTR WRBTR SGTXT SAKNR HKONT ZLSCH
FROM BSIK INTO TABLE IT_STD_BSIK FOR ALL ENTRIES IN IT_STD_BSAK
WHERE BUKRS = IT_STD_BSAK-BUKRS AND LIFNR = IT_STD_BSAK-LIFNR AND GJAHR = IT_STD_BSAK-GJAHR .
ENDIF.
IF NOT IT_STD_BSAK[] IS INITIAL.
SELECT LIFNR NAME1
FROM LFA1 INTO TABLE IT_STD_LFA1 FOR ALL ENTRIES IN IT_STD_BSAK
WHERE LIFNR = IT_STD_BSAK-LIFNR.
ENDIF.
LOOP AT IT_STD_BSAK.
IT_STD_FINAL-BUKRS = IT_STD_BSAK-BUKRS.
IT_STD_FINAL-LIFNR = IT_STD_BSAK-LIFNR.
IT_STD_FINAL-UMSKS = IT_STD_BSAK-UMSKS.
IT_STD_FINAL-UMSKZ = IT_STD_BSAK-UMSKZ.
IT_STD_FINAL-AUGDT = IT_STD_BSAK-AUGDT.
IT_STD_FINAL-AUGBL = IT_STD_BSAK-AUGBL.
IT_STD_FINAL-ZUONR = IT_STD_BSAK-ZUONR.
IT_STD_FINAL-GJAHR = IT_STD_BSAK-GJAHR.
IT_STD_FINAL-BELNR = IT_STD_BSAK-BELNR.
IT_STD_FINAL-BUZEI = IT_STD_BSAK-BUZEI.
IT_STD_FINAL-BUDAT = IT_STD_BSAK-BUDAT.
IT_STD_FINAL-BLDAT = IT_STD_BSAK-BLDAT.
IT_STD_FINAL-XBLNR = IT_STD_BSAK-XBLNR.
IT_STD_FINAL-BLART = IT_STD_BSAK-BLART.
IT_STD_FINAL-MONAT = IT_STD_BSAK-MONAT.
IT_STD_FINAL-BSCHL = IT_STD_BSAK-BSCHL.
IT_STD_FINAL-ZUMSK = IT_STD_BSAK-ZUMSK.
IT_STD_FINAL-SHKZG = IT_STD_BSAK-SHKZG.
IT_STD_FINAL-GSBER = IT_STD_BSAK-GSBER.
IT_STD_FINAL-DMBTR = IT_STD_BSAK-DMBTR.
IT_STD_FINAL-WRBTR = IT_STD_BSAK-WRBTR.
IT_STD_FINAL-SGTXT = IT_STD_BSAK-SGTXT.
IT_STD_FINAL-SAKNR = IT_STD_BSAK-SAKNR.
IT_STD_FINAL-HKONT = IT_STD_BSAK-HKONT.
READ TABLE IT_STD_LFA1 WITH KEY LIFNR = IT_STD_FINAL-LIFNR.
IF SY-SUBRC = 0.
IT_STD_FINAL-NAME1 = IT_STD_LFA1-NAME1.
ENDIF.
APPEND IT_STD_FINAL.
CLEAR IT_STD_FINAL.
ENDLOOP.
LOOP AT IT_STD_BSIK.
IF SY-SUBRC = 0.
IT_STD_FINAL-BUKRS = IT_STD_BSIK-BUKRS.
IT_STD_FINAL-LIFNR = IT_STD_BSIK-LIFNR.
IT_STD_FINAL-UMSKS = IT_STD_BSIK-UMSKS.
IT_STD_FINAL-UMSKZ = IT_STD_BSIK-UMSKZ.
IT_STD_FINAL-AUGDT = IT_STD_BSIK-AUGDT.
IT_STD_FINAL-AUGBL = IT_STD_BSIK-AUGBL.
IT_STD_FINAL-ZUONR = IT_STD_BSIK-ZUONR.
IT_STD_FINAL-GJAHR = IT_STD_BSIK-GJAHR.
IT_STD_FINAL-BELNR = IT_STD_BSIK-BELNR.
IT_STD_FINAL-BUZEI = IT_STD_BSIK-BUZEI.
IT_STD_FINAL-BUDAT = IT_STD_BSIK-BUDAT.
IT_STD_FINAL-BLDAT = IT_STD_BSIK-BLDAT.
IT_STD_FINAL-XBLNR = IT_STD_BSIK-XBLNR.
IT_STD_FINAL-BLART = IT_STD_BSIK-BLART.
IT_STD_FINAL-MONAT = IT_STD_BSIK-MONAT.
IT_STD_FINAL-BSCHL = IT_STD_BSIK-BSCHL.
IT_STD_FINAL-ZUMSK = IT_STD_BSIK-ZUMSK.
IT_STD_FINAL-SHKZG = IT_STD_BSIK-SHKZG.
IT_STD_FINAL-GSBER = IT_STD_BSIK-GSBER.
IT_STD_FINAL-DMBTR = IT_STD_BSIK-DMBTR.
IT_STD_FINAL-WRBTR = IT_STD_BSIK-WRBTR.
IT_STD_FINAL-SGTXT = IT_STD_BSIK-SGTXT.
IT_STD_FINAL-SAKNR = IT_STD_BSIK-SAKNR.
IT_STD_FINAL-HKONT = IT_STD_BSIK-HKONT.
IT_STD_FINAL-ZLSCH = IT_STD_BSIK-ZLSCH.
ENDIF.
APPEND IT_STD_FINAL.
CLEAR IT_STD_FINAL.
ENDLOOP.
LOOP AT IT_STD_FINAL.
IF IT_STD_FINAL-SHKZG = 'S'.
IT_STD_FINAL-DMBTR_S = IT_STD_FINAL-DMBTR.
ELSE.
IF IT_STD_FINAL-SHKZG = 'H'.
IT_STD_FINAL-DMBTR_H = IT_STD_FINAL-DMBTR.
ENDIF.
ENDIF.
IT_STD_FINAL-DMBTR = ''.
MODIFY IT_STD_FINAL INDEX SY-TABIX TRANSPORTING DMBTR_H DMBTR_S DMBTR.
"VAR.
CLEAR IT_STD_FINAL.
ENDLOOP.
SORT IT_STD_FINAL BY LIFNR GSBER GJAHR.
ENDFORM. " DATA_RETRIVAL
*& Form FIELD
text
--> p1 text
<-- p2 text
form FIELD .
LCAT-FIELDNAME = 'LIFNR'.
LCAT-TABNAME = 'IT_STD_FINAL'.
LCAT-SELTEXT_L = 'Vendor No'.
LCAT-JUST = 'M'.
APPEND LCAT TO FIELDCAT.
CLEAR LCAT.
LCAT-FIELDNAME = 'NAME1'.
LCAT-TABNAME = 'IT_STD_FINAL'.
LCAT-SELTEXT_L = 'Vendor Name'.
LCAT-JUST = 'M'.
APPEND LCAT TO FIELDCAT.
CLEAR LCAT.
LCAT-FIELDNAME = 'GJAHR'.
LCAT-TABNAME = 'IT_STD_FINAL'.
LCAT-SELTEXT_L = 'Fiscal Year'.
LCAT-JUST = 'M'.
APPEND LCAT TO FIELDCAT.
CLEAR LCAT.
LCAT-FIELDNAME = 'GSBER'.
LCAT-TABNAME = 'IT_STD_FINAL'.
LCAT-SELTEXT_L = 'BussArea'.
LCAT-JUST = 'M'.
APPEND LCAT TO FIELDCAT.
CLEAR LCAT.
LCAT-FIELDNAME = 'DMBTR_S'.
LCAT-TABNAME = 'IT_STD_FINAL'.
LCAT-SELTEXT_L = 'Debit Balanace'.
LCAT-JUST = 'M'.
APPEND LCAT TO FIELDCAT.
CLEAR LCAT.
LCAT-FIELDNAME = 'DMBTR_H'.
LCAT-TABNAME = 'IT_STD_FINAL'.
LCAT-SELTEXT_L = 'Credit Balance'.
LCAT-JUST = 'M'.
APPEND LCAT TO FIELDCAT.
CLEAR LCAT.
LCAT-FIELDNAME = 'BAL'.
LCAT-TABNAME = 'IT_STD_FINAL'.
LCAT-SELTEXT_L = 'Accumulated Balance'.
LCAT-JUST = 'M'.
APPEND LCAT TO FIELDCAT.
CLEAR LCAT.
endform. " FIELD
*& Form DISPLAY
text
--> p1 text
<-- p2 text
form DISPLAY .
CLEAR: IT_STD_BSAK,IT_STD_BSIK, IT_STD_LFA1 .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_PF_STATUS_SET = 'STATUS '
I_CALLBACK_USER_COMMAND = ' '
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT = LAYOUT
IT_FIELDCAT = FIELDCAT[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT = IT_SORT
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS = EVENTS
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_HTML_HEIGHT_TOP = 0
I_HTML_HEIGHT_END = 0
IT_ALV_GRAPHICS =
IT_HYPERLINK =
IT_ADD_FIELDCAT =
IT_EXCEPT_QINFO =
IR_SALV_FULLSCREEN_ADAPTER =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = IT_CHARG
t_outtab = IT_STD_FINAL[]
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "DISPLAY
*& Form EVENTS
text
--> p1 text
<-- p2 text
form EVENTS USING P_EVENTS TYPE slis_t_event.
DATA: ls_event TYPE slis_alv_event.
ls_event-name = 'TOP_OF_PAGE'.
ls_event-form = 'TOP_OF_PAGE'.
APPEND ls_event TO P_EVENTS.
endform. " EVENTS
*& Form TOP_OF_PAGE
text
FORM TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = TOP.
ENDFORM. "TOP_OF_PAGE
*& Form LAYOUT
text
--> p1 text
<-- p2 text
form LAYOUT .
LAYOUT-ZEBRA = 'X'.
LAYOUT-INFO_FIELDNAME = 'LINE_COLOR'.
LAYOUT-COLWIDTH_OPTIMIZE = 'X'.
APPEND LAYOUT." TO LAYOUT.
endform. " LAYOUT
*& Form EVENTS_1
text
-->P_EVENTS text
FORM EVENTS_1 USING P_EVENTS TYPE slis_t_event.
DATA: ls_event TYPE slis_alv_event.
WRITE: SY-UNAME.
ls_event-name = 'END_OF_PAGE'.
ls_event-form = 'END_OF_PAGE'.
APPEND ls_event TO P_EVENTS.
ENDFORM. " EVENTS_1Seniors , Please Help me with this Requirment
BUKRS _____________________
GJAHR ____________________
LIFNR _____________________
MONAT _____________________
LIFNR NAME1 GSBER GJAHR HBAL SBAL ACCUMBAL
1001 ABB BUSS1 2005 300 00
ABB BUSS1 2005 00 100
300 100 (300-100)=200
ABB BUSS1 2006 200 00
ABB BUSS1 2006 200 00
400 00 (400-00)+ 200 =
600
ABB BUSS2 2005 300 00
ABB BUSS2 2005 00 100
300 100 ( 300-100) =200
ABB BUSS2 2006 400 00
ABB BUSS2 2006 00 100
400 100 (400-100)+200 =
500 ****************************************************************************
1400 300 (1400-300) **********************************************************************************************************
Same for the Next Vendor also...
This is the report for this Requirment i am working on....Please Help me in the Logic..How to Go on with it....
*& Report ZVENDOR_RECONCILLATION
REPORT ZVENDOR_RECONCILLATION.
TABLES : BSAK , BSIK , LFC1 , LFC3 , LFA1.
*ALV
TYPE-POOLS: SLIS.
*TYPE-POOLS icon.
DATA: It_SORT TYPE SLIS_T_SORTINFO_ALV ."WITH HEADER LINE.
DATA: TOP TYPE slis_t_listheader,
END TYPE slis_t_listheader,
EVENTS TYPE slis_t_event.
DATA : T_KEY TYPE SLIS_KEYINFO_ALV.
DATA : FIELDCAT TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE,
LAYOUT TYPE SLIS_LAYOUT_ALV OCCURS 1 WITH HEADER LINE ,
LCAT TYPE SLIS_FIELDCAT_ALV.
*INTERNAL TABLE
DATA: BEGIN OF sd_bsak,
bukrs TYPE bsak-bukrs,
lifnr TYPE bsak-lifnr,
umsks TYPE bsak-umsks,
umskz TYPE bsak-umskz,
augdt TYPE bsak-augdt,
augbl TYPE bsak-augbl,
zuonr TYPE bsak-zuonr,
gjahr TYPE bsak-gjahr,
belnr TYPE bsak-belnr,
buzei TYPE bsak-buzei,
budat TYPE bsak-budat,
bldat TYPE bsak-bldat,
xblnr TYPE bsak-xblnr,
blart TYPE bsak-blart,
monat TYPE bsak-monat,
bschl TYPE bsak-bschl,
zumsk TYPE bsak-zumsk,
shkzg TYPE bsak-shkzg,
gsber TYPE bsak-gsber,
dmbtr TYPE bsak-dmbtr,
wrbtr TYPE bsak-wrbtr,
sgtxt TYPE bsak-sgtxt,
saknr TYPE bsak-saknr,
hkont TYPE bsak-hkont,
END OF sd_bsak.
DATA: BEGIN OF sd_bsik,
bukrs TYPE bsik-bukrs,
lifnr TYPE bsik-lifnr,
umsks TYPE bsik-umsks,
umskz TYPE bsik-umskz,
augdt TYPE bsik-augdt,
augbl TYPE bsik-augbl,
zuonr TYPE bsik-zuonr,
gjahr TYPE bsik-gjahr,
belnr TYPE bsik-belnr,
buzei TYPE bsik-buzei,
budat TYPE bsik-budat,
bldat TYPE bsik-bldat,
xblnr TYPE bsik-xblnr,
blart TYPE bsik-blart,
monat TYPE bsik-monat,
bschl TYPE bsik-bschl,
zumsk TYPE bsik-zumsk,
shkzg TYPE bsik-shkzg,
gsber TYPE bsik-gsber,
dmbtr TYPE bsik-dmbtr,
wrbtr TYPE bsik-wrbtr,
sgtxt TYPE bsik-sgtxt,
saknr TYPE bsik-saknr,
hkont TYPE bsik-hkont,
zlsch TYPE bsik-zlsch,
END OF sd_bsik.
DATA: BEGIN OF it_lfa1,
lifnr TYPE lfa1-lifnr,
name1 TYPE lfa1-name1,
END OF it_lfa1.
*FINAL INTERNAL TABLE DECLARATION
DATA: BEGIN OF IT_FINAL,
lifnr TYPE bsak-lifnr,
gsber TYPE bsak-gsber,
bukrs TYPE bsak-bukrs,
umsks TYPE bsak-umsks,
umskz TYPE bsak-umskz,
augdt TYPE bsak-augdt,
augbl TYPE bsak-augbl,
zuonr TYPE bsak-zuonr,
gjahr TYPE bsak-gjahr,
belnr TYPE bsak-belnr,
buzei TYPE bsak-buzei,
budat TYPE bsak-budat,
bldat TYPE bsak-bldat,
xblnr TYPE bsak-xblnr,
blart TYPE bsak-blart,
monat TYPE bsak-monat,
bschl TYPE bsak-bschl,
zumsk TYPE bsak-zumsk,
shkzg TYPE bsak-shkzg,
gsber TYPE bsak-gsber,
dmbtr TYPE bsak-dmbtr,
wrbtr TYPE bsak-wrbtr,
sgtxt TYPE bsak-sgtxt,
saknr TYPE bsak-saknr,
hkont TYPE bsak-hkont,
DMBTR_S TYPE BSAK-DMBTR,
DMBTR_H TYPE BSAK-DMBTR,
DS TYPE P DECIMALS 2,
DH TYPE P DECIMALS 2,
SUB TYPE P DECIMALS 2,
ADD TYPE P DECIMALS 2,
BAL TYPE P DECIMALS 2,
lifnr TYPE bsik-lifnr,
umsks TYPE bsik-umsks,
umskz TYPE bsik-umskz,
augdt TYPE bsik-augdt,
augbl TYPE bsik-augbl,
zuonr TYPE bsik-zuonr,
gjahr TYPE bsik-gjahr,
belnr TYPE bsik-belnr,
buzei TYPE bsik-buzei,
budat TYPE bsik-budat,
bldat TYPE bsik-bldat,
xblnr TYPE bsik-xblnr,
blart TYPE bsik-blart,
monat TYPE bsik-monat,
bschl TYPE bsik-bschl,
zumsk TYPE bsik-zumsk,
shkzg TYPE bsik-shkzg,
gsber TYPE bsik-gsber,
dmbtr TYPE bsik-dmbtr,
wrbtr TYPE bsik-wrbtr,
sgtxt TYPE bsik-sgtxt,
saknr TYPE bsik-saknr,
hkont TYPE bsik-hkont,
zlsch TYPE bsik-zlsch,
lifnr TYPE lfa1-lifnr,
name1 TYPE lfa1-name1,
END OF IT_FINAL.
DATA: BEGIN OF SD_FINAL,
gsber TYPE bsak-gsber,
lifnr TYPE bsak-lifnr,
bukrs TYPE bsak-bukrs,
lifnr TYPE bsak-lifnr,
umsks TYPE bsak-umsks,
umskz TYPE bsak-umskz,
augdt TYPE bsak-augdt,
augbl TYPE bsak-augbl,
zuonr TYPE bsak-zuonr,
gjahr TYPE bsak-gjahr,
belnr TYPE bsak-belnr,
buzei TYPE bsak-buzei,
budat TYPE bsak-budat,
bldat TYPE bsak-bldat,
xblnr TYPE bsak-xblnr,
blart TYPE bsak-blart,
monat TYPE bsak-monat,
bschl TYPE bsak-bschl,
zumsk TYPE bsak-zumsk,
shkzg TYPE bsak-shkzg,
dmbtr TYPE bsak-dmbtr,
wrbtr TYPE bsak-wrbtr,
sgtxt TYPE bsak-sgtxt,
saknr TYPE bsak-saknr,
hkont TYPE bsak-hkont,
bukrs TYPE bsik-bukrs,
lifnr TYPE bsik-lifnr,
umsks TYPE bsik-umsks,
umskz TYPE bsik-umskz,
augdt TYPE bsik-augdt,
augbl TYPE bsik-augbl,
zuonr TYPE bsik-zuonr,
gjahr TYPE bsik-gjahr,
belnr TYPE bsik-belnr,
buzei TYPE bsik-buzei,
budat TYPE bsik-budat,
bldat TYPE bsik-bldat,
xblnr TYPE bsik-xblnr,
blart TYPE bsik-blart,
monat TYPE bsik-monat,
bschl TYPE bsik-bschl,
zumsk TYPE bsik-zumsk,
shkzg TYPE bsik-shkzg,
gsber TYPE bsik-gsber,
dmbtr TYPE bsik-dmbtr,
wrbtr TYPE bsik-wrbtr,
sgtxt TYPE bsik-sgtxt,
saknr TYPE bsik-saknr,
hkont TYPE bsik-hkont,
zlsch TYPE bsik-zlsch,
lifnr TYPE lfa1-lifnr,
name1 TYPE lfa1-name1,
line_color(4) TYPE c,
END OF SD_FINAL.
DATA IT_STD_BSAK LIKE TABLE OF SD_BSAK WITH HEADER LINE.
DATA IT_STD_BSIK LIKE TABLE OF SD_BSIK WITH HEADER LINE.
DATA IT_STD_LFA1 LIKE TABLE OF IT_LFA1 WITH HEADER LINE.
DATA IT_STD_FINAL LIKE TABLE OF IT_FINAL WITH HEADER LINE.
DATA IT_FINAL_DISPLAY LIKE TABLE OF SD_FINAL WITH HEADER LINE.
*SELECTION-SCREEN
SELECTION-SCREEN BEGIN OF BLOCK HEADER WITH FRAME TITLE TEXT-001.
PARAMETERS: P_BUKRS LIKE BSAK-BUKRS OBLIGATORY.
SELECT-OPTIONS : S_GJAHR FOR BSAK-GJAHR.
SELECT-OPTIONS: S_LIFNR FOR BSAK-LIFNR.
SELECT-OPTIONS: S_MONAT FOR BSAK-MONAT.
SELECTION-SCREEN END OF BLOCK HEADER.
START-OF-SELECTION.
SET PF-STATUS 'STATUS'.
PERFORM DATA_RETRIVAL.
PERFORM FIELD.
PERFORM EVENTS USING EVENTS.
PERFORM EVENTS_1 USING EVENTS.
PERFORM HEADER USING TOP.
PERFORM LAYOUT.
PERFORM DISPLAY.
END-OF-PAGE.
*& Form DATA_RETRIVAL
text
--> p1 text
<-- p2 text
FORM DATA_RETRIVAL .
SELECT BUKRS LIFNR UMSKS UMSKZ AUGDT AUGBL ZUONR GJAHR BELNR BUZEI BUDAT BLDAT XBLNR BLART
MONAT BSCHL ZUMSK SHKZG GSBER DMBTR WRBTR SGTXT SAKNR HKONT
FROM BSAK INTO TABLE IT_STD_BSAK
WHERE BUKRS = P_BUKRS
AND GJAHR IN S_GJAHR
AND LIFNR IN S_LIFNR
AND MONAT IN S_MONAT.
IF NOT IT_STD_BSAK[] IS INITIAL.
SELECT BUKRS LIFNR UMSKS UMSKZ AUGDT AUGBL ZUONR GJAHR BELNR BUZEI BUDAT BLDAT XBLNR
BLART MONAT BSCHL ZUMSK SHKZG GSBER DMBTR WRBTR SGTXT SAKNR HKONT ZLSCH
FROM BSIK INTO TABLE IT_STD_BSIK FOR ALL ENTRIES IN IT_STD_BSAK
WHERE BUKRS = IT_STD_BSAK-BUKRS AND LIFNR = IT_STD_BSAK-LIFNR AND GJAHR = IT_STD_BSAK-GJAHR .
ENDIF.
IF NOT IT_STD_BSAK[] IS INITIAL.
SELECT LIFNR NAME1
FROM LFA1 INTO TABLE IT_STD_LFA1 FOR ALL ENTRIES IN IT_STD_BSAK
WHERE LIFNR = IT_STD_BSAK-LIFNR.
ENDIF.
LOOP AT IT_STD_BSAK.
IT_STD_FINAL-BUKRS = IT_STD_BSAK-BUKRS.
IT_STD_FINAL-LIFNR = IT_STD_BSAK-LIFNR.
IT_STD_FINAL-UMSKS = IT_STD_BSAK-UMSKS.
IT_STD_FINAL-UMSKZ = IT_STD_BSAK-UMSKZ.
IT_STD_FINAL-AUGDT = IT_STD_BSAK-AUGDT.
IT_STD_FINAL-AUGBL = IT_STD_BSAK-AUGBL.
IT_STD_FINAL-ZUONR = IT_STD_BSAK-ZUONR.
IT_STD_FINAL-GJAHR = IT_STD_BSAK-GJAHR.
IT_STD_FINAL-BELNR = IT_STD_BSAK-BELNR.
IT_STD_FINAL-BUZEI = IT_STD_BSAK-BUZEI.
IT_STD_FINAL-BUDAT = IT_STD_BSAK-BUDAT.
IT_STD_FINAL-BLDAT = IT_STD_BSAK-BLDAT.
IT_STD_FINAL-XBLNR = IT_STD_BSAK-XBLNR.
IT_STD_FINAL-BLART = IT_STD_BSAK-BLART.
IT_STD_FINAL-MONAT = IT_STD_BSAK-MONAT.
IT_STD_FINAL-BSCHL = IT_STD_BSAK-BSCHL.
IT_STD_FINAL-ZUMSK = IT_STD_BSAK-ZUMSK.
IT_STD_FINAL-SHKZG = IT_STD_BSAK-SHKZG.
IT_STD_FINAL-GSBER = IT_STD_BSAK-GSBER.
IT_STD_FINAL-DMBTR = IT_STD_BSAK-DMBTR.
IT_STD_FINAL-WRBTR = IT_STD_BSAK-WRBTR.
IT_STD_FINAL-SGTXT = IT_STD_BSAK-SGTXT.
IT_STD_FINAL-SAKNR = IT_STD_BSAK-SAKNR.
IT_STD_FINAL-HKONT = IT_STD_BSAK-HKONT.
READ TABLE IT_STD_LFA1 WITH KEY LIFNR = IT_STD_FINAL-LIFNR.
IF SY-SUBRC = 0.
IT_STD_FINAL-NAME1 = IT_STD_LFA1-NAME1.
ENDIF.
APPEND IT_STD_FINAL.
CLEAR IT_STD_FINAL.
ENDLOOP.
LOOP AT IT_STD_BSIK.
IF SY-SUBRC = 0.
IT_STD_FINAL-BUKRS = IT_STD_BSIK-BUKRS.
IT_STD_FINAL-LIFNR = IT_STD_BSIK-LIFNR.
IT_STD_FINAL-UMSKS = IT_STD_BSIK-UMSKS.
IT_STD_FINAL-UMSKZ = IT_STD_BSIK-UMSKZ.
IT_STD_FINAL-AUGDT = IT_STD_BSIK-AUGDT.
IT_STD_FINAL-AUGBL = IT_STD_BSIK-AUGBL.
IT_STD_FINAL-ZUONR = IT_STD_BSIK-ZUONR.
IT_STD_FINAL-GJAHR = IT_STD_BSIK-GJAHR.
IT_STD_FINAL-BELNR = IT_STD_BSIK-BELNR.
IT_STD_FINAL-BUZEI = IT_STD_BSIK-BUZEI.
IT_STD_FINAL-BUDAT = IT_STD_BSIK-BUDAT.
IT_STD_FINAL-BLDAT = IT_STD_BSIK-BLDAT.
IT_STD_FINAL-XBLNR = IT_STD_BSIK-XBLNR.
IT_STD_FINAL-BLART = IT_STD_BSIK-BLART.
IT_STD_FINAL-MONAT = IT_STD_BSIK-MONAT.
IT_STD_FINAL-BSCHL = IT_STD_BSIK-BSCHL.
IT_STD_FINAL-ZUMSK = IT_STD_BSIK-ZUMSK.
IT_STD_FINAL-SHKZG = IT_STD_BSIK-SHKZG.
IT_STD_FINAL-GSBER = IT_STD_BSIK-GSBER.
IT_STD_FINAL-DMBTR = IT_STD_BSIK-DMBTR.
IT_STD_FINAL-WRBTR = IT_STD_BSIK-WRBTR.
IT_STD_FINAL-SGTXT = IT_STD_BSIK-SGTXT.
IT_STD_FINAL-SAKNR = IT_STD_BSIK-SAKNR.
IT_STD_FINAL-HKONT = IT_STD_BSIK-HKONT.
IT_STD_FINAL-ZLSCH = IT_STD_BSIK-ZLSCH.
ENDIF.
APPEND IT_STD_FINAL.
CLEAR IT_STD_FINAL.
ENDLOOP.
LOOP AT IT_STD_FINAL.
IF IT_STD_FINAL-SHKZG = 'S'.
IT_STD_FINAL-DMBTR_S = IT_STD_FINAL-DMBTR.
ELSE.
IF IT_STD_FINAL-SHKZG = 'H'.
IT_STD_FINAL-DMBTR_H = IT_STD_FINAL-DMBTR.
ENDIF.
ENDIF.
IT_STD_FINAL-DMBTR = ''.
MODIFY IT_STD_FINAL INDEX SY-TABIX TRANSPORTING DMBTR_H DMBTR_S DMBTR.
"VAR.
CLEAR IT_STD_FINAL.
ENDLOOP.
SORT IT_STD_FINAL BY LIFNR GSBER GJAHR.
ENDFORM. " DATA_RETRIVAL
*& Form FIELD
text
--> p1 text
<-- p2 text
form FIELD .
LCAT-FIELDNAME = 'LIFNR'.
LCAT-TABNAME = 'IT_STD_FINAL'.
LCAT-SELTEXT_L = 'Vendor No'.
LCAT-JUST = 'M'.
APPEND LCAT TO FIELDCAT.
CLEAR LCAT.
LCAT-FIELDNAME = 'NAME1'.
LCAT-TABNAME = 'IT_STD_FINAL'.
LCAT-SELTEXT_L = 'Vendor Name'.
LCAT-JUST = 'M'.
APPEND LCAT TO FIELDCAT.
CLEAR LCAT.
LCAT-FIELDNAME = 'GJAHR'.
LCAT-TABNAME = 'IT_STD_FINAL'.
LCAT-SELTEXT_L = 'Fiscal Year'.
LCAT-JUST = 'M'.
APPEND LCAT TO FIELDCAT.
CLEAR LCAT.
LCAT-FIELDNAME = 'GSBER'.
LCAT-TABNAME = 'IT_STD_FINAL'.
LCAT-SELTEXT_L = 'BussArea'.
LCAT-JUST = 'M'.
APPEND LCAT TO FIELDCAT.
CLEAR LCAT.
LCAT-FIELDNAME = 'DMBTR_S'.
LCAT-TABNAME = 'IT_STD_FINAL'.
LCAT-SELTEXT_L = 'Debit Balanace'.
LCAT-JUST = 'M'.
APPEND LCAT TO FIELDCAT.
CLEAR LCAT.
LCAT-FIELDNAME = 'DMBTR_H'.
LCAT-TABNAME = 'IT_STD_FINAL'.
LCAT-SELTEXT_L = 'Credit Balance'.
LCAT-JUST = 'M'.
APPEND LCAT TO FIELDCAT.
CLEAR LCAT.
LCAT-FIELDNAME = 'BAL'.
LCAT-TABNAME = 'IT_STD_FINAL'.
LCAT-SELTEXT_L = 'Accumulated Balance'.
LCAT-JUST = 'M'.
APPEND LCAT TO FIELDCAT.
CLEAR LCAT.
endform. " FIELD
*& Form DISPLAY
text
--> p1 text
<-- p2 text
form DISPLAY .
CLEAR: IT_STD_BSAK,IT_STD_BSIK, IT_STD_LFA1 .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_PF_STATUS_SET = 'STATUS '
I_CALLBACK_USER_COMMAND = ' '
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT = LAYOUT
IT_FIELDCAT = FIELDCAT[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT = IT_SORT
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS = EVENTS
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_HTML_HEIGHT_TOP = 0
I_HTML_HEIGHT_END = 0
IT_ALV_GRAPHICS =
IT_HYPERLINK =
IT_ADD_FIELDCAT =
IT_EXCEPT_QINFO =
IR_SALV_FULLSCREEN_ADAPTER =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = IT_CHARG
t_outtab = IT_STD_FINAL[]
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "DISPLAY
*& Form EVENTS
text
--> p1 text
<-- p2 text
form EVENTS USING P_EVENTS TYPE slis_t_event.
DATA: ls_event TYPE slis_alv_event.
ls_event-name = 'TOP_OF_PAGE'.
ls_event-form = 'TOP_OF_PAGE'.
APPEND ls_event TO P_EVENTS.
endform. " EVENTS
*& Form TOP_OF_PAGE
text
FORM TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = TOP.
ENDFORM. "TOP_OF_PAGE
*& Form LAYOUT
text
--> p1 text
<-- p2 text
form LAYOUT .
LAYOUT-ZEBRA = 'X'.
LAYOUT-INFO_FIELDNAME = 'LINE_COLOR'.
LAYOUT-COLWIDTH_OPTIMIZE = 'X'.
APPEND LAYOUT." TO LAYOUT.
endform. " LAYOUT
*& Form EVENTS_1
text
-->P_EVENTS text
FORM EVENTS_1 USING P_EVENTS TYPE slis_t_event.
DATA: ls_event TYPE slis_alv_event.
WRITE: SY-UNAME.
ls_event-name = 'END_OF_PAGE'.
ls_event-form = 'END_OF_PAGE'.
APPEND ls_event TO P_EVENTS.
ENDFORM. " EVENTS_1
Maybe you are looking for
-
HI Experts, The client has upgraded to ECC 6.0 from 4.6c, everything works fine but the only problem is that the users complain that the server is slow. The client has done a memory upgrade from 8Gb to 16 Gb but the problem still pertains. The server
-
Browser / Java Error - Random Image Thumbnails Do Not Load
A typical example of what problem I'm having is during a Google Image Search - you type in a search term and 15 image thumbnails pop up. Usually. Right now I get only 6-7 random thumbnails to be visible - the rest are blank boxes with broken icons or
-
after restoring definitions iphone 3gs does not works
-
[[11g] many XMLSCHEMA for a given binary XML table
Hi, --1----------------------------------- I cannot create a table associated with several xmlschemas. create table "VALIDATE_XML_SCHEMA" of XMLTYPE XMLTYPE STORE AS BASICFILE BINARY XML XMLSCHEMAS (XMLSCHEMA "http://www.binary.com/root.xsd" ELEMENT
-
Enter query - what was changed (entered) in enter query mode
Hello, I need to know what criteria (values and items) an user entered (typed) when my form is in enter query mode. Thanks