Please Help me with Reporting!!!!
I am looking at using Captivate to create online training
courses within local government and I am wondering what my options
are regarding reporting?
Is the email function a reasonable format?
What is AICC?
What is SCORM?
What is Question mark perception?
What is Adobe Connect Server?
Is there a cheap easy to use LMS I can use?
Any help anyone can give on any of the points would be
greatly appreciated.
Thank you very much.
I don't think it addresses Adobe Connect, but the following
Developer Center article discusses most of the available reporting
options:
http://www.adobe.com/devnet/captivate/articles/lms_output.html
Funny thing... cheap and easy to use are not words one
normally associates with an LMS. Expensive and finicky are words
that I'd use, but perhaps my experience differs significantly from
everybody else's.
Similar Messages
-
Please help me with Reporting Services Button
HI there,
I am having major trouble trying to get the reporting services button to work.
I have all the relevant SSRS and SQL Reporting Services installed on my local machine and quite happily connect to the SSRS reportServer via the URL: http:pw011157:8080/ReportServer yet when I try to enter this to the Report Server Button Connection in Xcelsius - the clock just goes round and round and round... never gives me a list of reports from the report server...
what do I have to do to get the Reporting Services Button to work correctly so I can pull in reports from SSRS
thanks
Deanhi Anil,
I've jsut spent 1 hour searching for an add-on Reporting Services or any type of file on my computer that could relate to installing the xrs gateway - Frustrated is NOt quite strong enough...
I can't even find the location where xcelsius extracts its single setup file to.?
I have the sp3 file from SAP software delivery - where the hell would I find the /add-ons/ReportingServices folder to install the component...
do they make it intentionally difficult? -
Please Help me with Oracle Reports (10G)
Hi ,
I have created a report in Oracle 10G and save it as .JSP file, while i tried to open
that .jsp file through edit plus i observed that reportbuilder have generated a code for what i have done in Layout but all the code is commented, why was it happened so , Do it effect the functionality of my report.
Please help me with this
Thanks and Regards
Kalyan ChittiHello Chris90909,
switch width an height properties as Inol mentioned.
http://nycapex.blogspot.com/2010/03/landscape.html
If you have any question about the issue, let us know.
Don't forget to mark Correct or Helpful accordingly. -
Please help me with the following two questions, very urgent
Hi All,
Please help me with some scenerios about what are the common problems when modifying a standard script such a standard Invoice script and how can we overcome them.
What are the common problems encountered when working with SAP SMARTFORMS and how to overcome them?
Please help me with these questions, its very urgent.
Thanks in advance.
MD.hi
hope it will help you.
reward if ehlp.
How to create a New smartfrom, it is having step by step procedure
http://sap.niraj.tripod.com/id67.html
step by step good ex link is....
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
Here is the procedure
1. Create a new smartforms
Transaction code SMARTFORMS
Create new smartforms call ZSMART
2. Define looping process for internal table
Pages and windows
First Page -> Header Window (Cursor at First Page then click Edit -> Node -> Create)
Here, you can specify your title and page numbering
&SFSY-PAGE& (Page 1) of &SFSY-FORMPAGES(Z4.0)& (Total Page)
Main windows -> TABLE -> DATA
In the Loop section, tick Internal table and fill in
ITAB1 (table in ABAP SMARTFORM calling function) INTO ITAB2
3. Define table in smartforms
Global settings :
Form interface
Variable name Type assignment Reference type
ITAB1 TYPE Table Structure
Global definitions
Variable name Type assignment Reference type
ITAB2 TYPE Table Structure
4. To display the data in the form
Make used of the Table Painter and declare the Line Type in Tabstrips Table
e.g. HD_GEN for printing header details,
IT_GEN for printing data details.
You have to specify the Line Type in your Text elements in the Tabstrips Output options.
Tick the New Line and specify the Line Type for outputting the data.
Declare your output fields in Text elements
Tabstrips - Output Options
For different fonts use this Style : IDWTCERTSTYLE
For Quantity or Amout you can used this variable &GS_ITAB-AMOUNT(12.2)&
5. Calling SMARTFORMS from your ABAP program
REPORT ZSMARTFORM.
Calling SMARTFORMS from your ABAP program.
Collecting all the table data in your program, and pass once to SMARTFORMS
SMARTFORMS
Declare your table type in :-
Global Settings -> Form Interface
Global Definintions -> Global Data
Main Window -> Table -> DATA
Written by : SAP Hints and Tips on Configuration and ABAP/4 Programming
http://sapr3.tripod.com
TABLES: MKPF.
DATA: FM_NAME TYPE RS38L_FNAM.
DATA: BEGIN OF INT_MKPF OCCURS 0.
INCLUDE STRUCTURE MKPF.
DATA: END OF INT_MKPF.
SELECT-OPTIONS S_MBLNR FOR MKPF-MBLNR MEMORY ID 001.
SELECT * FROM MKPF WHERE MBLNR IN S_MBLNR.
MOVE-CORRESPONDING MKPF TO INT_MKPF.
APPEND INT_MKPF.
ENDSELECT.
At the end of your program.
Passing data to SMARTFORMS
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'ZSMARTFORM'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
if sy-subrc <> 0.
WRITE: / 'ERROR 1'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function FM_NAME
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
GS_MKPF = INT_MKPF
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Smartform
you can check this link here you can see the steps and you can do it the same by looking at it..
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
SMARTFORMS STEPS.
1. In Tcode se11 Create a structure(struct) same like the Internal table that you are going to use in your report.
2. Create Table type(t_struct) of stracture in se11.
3. In your program declare Internal table(Itab) type table of structure(struct).
4. Define work area(wa) like line of internal table.
5. Open Tcode Smartforms
6. In form Global setting , forminterface Import parameter define Internal table(Itab) like table type of stracture(t_struct).
7. In form Global setting , Global definitions , in Global data define Work area(wa) like type stracture(struct).
8. In form pages and window, create Page node by default Page1 is available.
9. In page node you can create numbers of secondary window. But in form there is only one Main window.
10. By right click on page you can create windows or Go to Edit, Node, Create.
11. After creating the window right click on window create table for displaying the data that you are passing through internal table.
12. In the table Data parameter, loop internal internal table (Itab) into work area(wa).
13. In table there are three areas Header, Main Area, Footer.
14. Right click on the Main area create table line by default line type1 is there select it.
15. Divide line into cells according to your need then for each cell create Text node.
16. In text node general attribute. Write down fields of your work area(wa) or write any thing you want to display.
17. Save form and activate it.
18. Then go to Environment, function module name, there you get the name of function module copy it.
19. In your program call the function module that you have copied from your form.
20. In your program in exporting parameter of function pass the internal table(itab).
SAP Smart Forms is introduced in SAP Basis Release 4.6C as the tool for creating and maintaining forms.
SAP Smart Forms allow you to execute simple modifications to the form and in the form logic by using simple graphical tools; in 90% of all cases, this won't include any programming effort. Thus, a power user without any programming knowledge can
configure forms with data from an SAP System for the relevant business processes.
To print a form, you need a program for data retrieval and a Smart Form that contains the entire from logic. As data retrieval and form logic are separated, you must only adapt the Smart Form if changes to the form logic are necessary. The application program passes the data via a function module interface to the Smart Form. When activating the Smart Form, the system automatically generates a function module. At runtime, the system processes this function module.
You can insert static and dynamic tables. This includes line feeds in individual table cells, triggering events for table headings and subtotals, and sorting data before output.
You can check individual nodes as well as the entire form and find any existing errors in the tree structure. The data flow analysis checks whether all fields (variables) have a defined value at the moment they are displayed.
SAP Smart Forms allow you to include graphics, which you can display either as part of the form or as background graphics. You use background graphics to copy the layout of an existing (scanned) form or to lend forms a company-specific look. During printout, you can suppress the background graphic, if desired.
SAP Smart Forms also support postage optimizing.
Also read SAP Note No. 168368 - Smart Forms: New form tool in Release 4.6C
What Transaction to start SAP Smart Forms?
Execute transaction SMARTFORMS to start SAP Smart Forms.
Key Benefits of SAP Smart Forms:
SAP Smart Forms allows you to reduce considerably the implementation costs of mySAP.com solutions since forms can be adjusted in minimum time.
You design a form using the graphical Form Painter and the graphical Table Painter. The form logic is represented by a hierarchy structure (tree structure) that consists of individual nodes, such as nodes for global settings, nodes for texts, nodes for output tables, or nodes for graphics.
To make changes, use Drag & Drop, Copy & Paste, and select different attributes.
These actions do not include writing of coding lines or using a Script language.
Using your form description maintained in the Form Builder, Smart Forms generates a function module that encapsulates layout, content and form logic. So you do not need a group of function modules to print a form, but only one.
For Web publishing, the system provides a generated XML output of the processed form.
Smart Forms provides a data stream called XML for Smart Forms (XSF) to allow the use of 3rd party printing tools. XSF passes form content from R/3 to an external product without passing any layout information about the Smart Form.
SmartForms System Fields
Within a form you can use the field string SFSY with its system fields. During form processing the system replaces these fields with the corresponding values. The field values come from the SAP System or are results of the processing.
System fields of Smart Forms
&SFSY-DATE&
Displays the date. You determine the display format in the user master record.
&SFSY-TIME&
Displays the time of day in the form HH:MM:SS.
&SFSY-PAGE&
Inserts the number of the current print page into the text. You determine the format of the page number (for example, Arabic, numeric) in the page node.
&SFSY-FORMPAGES&
Displays the total number of pages for the currently processed form. This allows you to include texts such as'Page x of y' into your output.
&SFSY-JOBPAGES&
Contains the total page number of all forms in the currently processed print request.
&SFSY-WINDOWNAME&
Contains the name of the current window (string in the Window field)
&SFSY-PAGENAME&
Contains the name of the current page (string in the Page field)
&SFSY-PAGEBREAK&
Is set to 'X' after a page break (either automatic [Page 7] or command-controlled [Page 46])
&SFSY-MAINEND&
Is set as soon as processing of the main window on the current page ends
&SFSY-EXCEPTION&
Contains the name of the raised exception. You must trigger your own exceptions, which you defined in the form interface, using the user_exception macro (syntax: user_exception <exception name >).
Example Forms Available in Standard SAP R/3
SF_EXAMPLE_01
Simple example; invoice with table output of flight booking for one customer
SF_EXAMPLE_02
Similar to SF_EXAMPLE_01 but with subtotals
SF_EXAMPLE_03
Similar to SF_EXAMPLE_02, whereby several customers are selected in the application program; the form is called for each customer and all form outputs are included in an output request
Advantages of SAP Smart Forms
SAP Smart Forms have the following advantages:
1. The adaption of forms is supported to a large extent by graphic tools for layout and logic, so that no programming knowledge is necessary (at least 90% of all adjustments). Therefore, power user forms can also make configurations for your business processes with data from an SAP system. Consultants are only required in special cases.
2. Displaying table structures (dynamic framing of texts)
3. Output of background graphics, for form design in particular the use of templates which were scanned.
4. Colored output of texts
5. User-friendly and integrated Form Painter for the graphical design of forms
6. Graphical Table Painter for drawing tables
7. Reusing Font and paragraph formats in forms (Smart Styles)
8. Data interface in XML format (XML for Smart Forms, in short XSF)
9. Form translation is supported by standard translation tools
10. Flexible reuse of text modules
11. HTML output of forms (Basis release 6.10)
12. Interactive Web forms with input fields, pushbuttons, radio buttons, etc. (Basis-Release 6.10) -
Please help me with user-exits or baids for TCode : FOE2 & FOE1
Hi Experts
Please help me with user-exits or baids for TCode : FOE2 & FOE1.
I found these but not picking values from VIMI01,VIOB03 and VIOB41.
User-exits
FVCH0001 CH-specific enhancements: Esp. POR
ISRE0001 Determine bank procedure account no.
ISRE0002 IPD reporting data retrieval
Business Add-in
FVD_HANDLE_FORMULA Processing of Condition FormulasHi,
ASk your basis regarding the CI_CSKB table active issue, and first of all i dont see any table with the name CI_CSKB.
And check this exit-COOMKS03 whether it works for your screen exits.
Cheers!!
VEnk@
Edited by: Venkat Reddy on Nov 4, 2008 5:59 PM -
Please Help me with this Logic.....
Seniors , Please Help me with this Requirment
BUKRS _____________________
GJAHR ____________________
LIFNR _____________________
MONAT _____________________
LIFNR NAME1 GSBER GJAHR HBAL SBAL ACCUMBAL
1001 ABB BUSS1 2005 300 00
ABB BUSS1 2005 00 100
300 100 (300-100)=200
ABB BUSS1 2006 200 00
ABB BUSS1 2006 200 00
400 00 (400-00)+ 200 =
600
ABB BUSS2 2005 300 00
ABB BUSS2 2005 00 100
300 100 ( 300-100) =200
ABB BUSS2 2006 400 00
ABB BUSS2 2006 00 100
400 100 (400-100)+200 =
500 ****************************************************************************
1400 300 (1400-300) **********************************************************************************************************
Same for the Next Vendor also...
This is the report for this Requirment i am working on....Please Help me in the Logic..How to Go on with it....
*& Report ZVENDOR_RECONCILLATION
REPORT ZVENDOR_RECONCILLATION.
TABLES : BSAK , BSIK , LFC1 , LFC3 , LFA1.
*ALV
TYPE-POOLS: SLIS.
*TYPE-POOLS icon.
DATA: It_SORT TYPE SLIS_T_SORTINFO_ALV ."WITH HEADER LINE.
DATA: TOP TYPE slis_t_listheader,
END TYPE slis_t_listheader,
EVENTS TYPE slis_t_event.
DATA : T_KEY TYPE SLIS_KEYINFO_ALV.
DATA : FIELDCAT TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE,
LAYOUT TYPE SLIS_LAYOUT_ALV OCCURS 1 WITH HEADER LINE ,
LCAT TYPE SLIS_FIELDCAT_ALV.
*INTERNAL TABLE
DATA: BEGIN OF sd_bsak,
bukrs TYPE bsak-bukrs,
lifnr TYPE bsak-lifnr,
umsks TYPE bsak-umsks,
umskz TYPE bsak-umskz,
augdt TYPE bsak-augdt,
augbl TYPE bsak-augbl,
zuonr TYPE bsak-zuonr,
gjahr TYPE bsak-gjahr,
belnr TYPE bsak-belnr,
buzei TYPE bsak-buzei,
budat TYPE bsak-budat,
bldat TYPE bsak-bldat,
xblnr TYPE bsak-xblnr,
blart TYPE bsak-blart,
monat TYPE bsak-monat,
bschl TYPE bsak-bschl,
zumsk TYPE bsak-zumsk,
shkzg TYPE bsak-shkzg,
gsber TYPE bsak-gsber,
dmbtr TYPE bsak-dmbtr,
wrbtr TYPE bsak-wrbtr,
sgtxt TYPE bsak-sgtxt,
saknr TYPE bsak-saknr,
hkont TYPE bsak-hkont,
END OF sd_bsak.
DATA: BEGIN OF sd_bsik,
bukrs TYPE bsik-bukrs,
lifnr TYPE bsik-lifnr,
umsks TYPE bsik-umsks,
umskz TYPE bsik-umskz,
augdt TYPE bsik-augdt,
augbl TYPE bsik-augbl,
zuonr TYPE bsik-zuonr,
gjahr TYPE bsik-gjahr,
belnr TYPE bsik-belnr,
buzei TYPE bsik-buzei,
budat TYPE bsik-budat,
bldat TYPE bsik-bldat,
xblnr TYPE bsik-xblnr,
blart TYPE bsik-blart,
monat TYPE bsik-monat,
bschl TYPE bsik-bschl,
zumsk TYPE bsik-zumsk,
shkzg TYPE bsik-shkzg,
gsber TYPE bsik-gsber,
dmbtr TYPE bsik-dmbtr,
wrbtr TYPE bsik-wrbtr,
sgtxt TYPE bsik-sgtxt,
saknr TYPE bsik-saknr,
hkont TYPE bsik-hkont,
zlsch TYPE bsik-zlsch,
END OF sd_bsik.
DATA: BEGIN OF it_lfa1,
lifnr TYPE lfa1-lifnr,
name1 TYPE lfa1-name1,
END OF it_lfa1.
*FINAL INTERNAL TABLE DECLARATION
DATA: BEGIN OF IT_FINAL,
lifnr TYPE bsak-lifnr,
gsber TYPE bsak-gsber,
bukrs TYPE bsak-bukrs,
umsks TYPE bsak-umsks,
umskz TYPE bsak-umskz,
augdt TYPE bsak-augdt,
augbl TYPE bsak-augbl,
zuonr TYPE bsak-zuonr,
gjahr TYPE bsak-gjahr,
belnr TYPE bsak-belnr,
buzei TYPE bsak-buzei,
budat TYPE bsak-budat,
bldat TYPE bsak-bldat,
xblnr TYPE bsak-xblnr,
blart TYPE bsak-blart,
monat TYPE bsak-monat,
bschl TYPE bsak-bschl,
zumsk TYPE bsak-zumsk,
shkzg TYPE bsak-shkzg,
gsber TYPE bsak-gsber,
dmbtr TYPE bsak-dmbtr,
wrbtr TYPE bsak-wrbtr,
sgtxt TYPE bsak-sgtxt,
saknr TYPE bsak-saknr,
hkont TYPE bsak-hkont,
DMBTR_S TYPE BSAK-DMBTR,
DMBTR_H TYPE BSAK-DMBTR,
DS TYPE P DECIMALS 2,
DH TYPE P DECIMALS 2,
SUB TYPE P DECIMALS 2,
ADD TYPE P DECIMALS 2,
BAL TYPE P DECIMALS 2,
lifnr TYPE bsik-lifnr,
umsks TYPE bsik-umsks,
umskz TYPE bsik-umskz,
augdt TYPE bsik-augdt,
augbl TYPE bsik-augbl,
zuonr TYPE bsik-zuonr,
gjahr TYPE bsik-gjahr,
belnr TYPE bsik-belnr,
buzei TYPE bsik-buzei,
budat TYPE bsik-budat,
bldat TYPE bsik-bldat,
xblnr TYPE bsik-xblnr,
blart TYPE bsik-blart,
monat TYPE bsik-monat,
bschl TYPE bsik-bschl,
zumsk TYPE bsik-zumsk,
shkzg TYPE bsik-shkzg,
gsber TYPE bsik-gsber,
dmbtr TYPE bsik-dmbtr,
wrbtr TYPE bsik-wrbtr,
sgtxt TYPE bsik-sgtxt,
saknr TYPE bsik-saknr,
hkont TYPE bsik-hkont,
zlsch TYPE bsik-zlsch,
lifnr TYPE lfa1-lifnr,
name1 TYPE lfa1-name1,
END OF IT_FINAL.
DATA: BEGIN OF SD_FINAL,
gsber TYPE bsak-gsber,
lifnr TYPE bsak-lifnr,
bukrs TYPE bsak-bukrs,
lifnr TYPE bsak-lifnr,
umsks TYPE bsak-umsks,
umskz TYPE bsak-umskz,
augdt TYPE bsak-augdt,
augbl TYPE bsak-augbl,
zuonr TYPE bsak-zuonr,
gjahr TYPE bsak-gjahr,
belnr TYPE bsak-belnr,
buzei TYPE bsak-buzei,
budat TYPE bsak-budat,
bldat TYPE bsak-bldat,
xblnr TYPE bsak-xblnr,
blart TYPE bsak-blart,
monat TYPE bsak-monat,
bschl TYPE bsak-bschl,
zumsk TYPE bsak-zumsk,
shkzg TYPE bsak-shkzg,
dmbtr TYPE bsak-dmbtr,
wrbtr TYPE bsak-wrbtr,
sgtxt TYPE bsak-sgtxt,
saknr TYPE bsak-saknr,
hkont TYPE bsak-hkont,
bukrs TYPE bsik-bukrs,
lifnr TYPE bsik-lifnr,
umsks TYPE bsik-umsks,
umskz TYPE bsik-umskz,
augdt TYPE bsik-augdt,
augbl TYPE bsik-augbl,
zuonr TYPE bsik-zuonr,
gjahr TYPE bsik-gjahr,
belnr TYPE bsik-belnr,
buzei TYPE bsik-buzei,
budat TYPE bsik-budat,
bldat TYPE bsik-bldat,
xblnr TYPE bsik-xblnr,
blart TYPE bsik-blart,
monat TYPE bsik-monat,
bschl TYPE bsik-bschl,
zumsk TYPE bsik-zumsk,
shkzg TYPE bsik-shkzg,
gsber TYPE bsik-gsber,
dmbtr TYPE bsik-dmbtr,
wrbtr TYPE bsik-wrbtr,
sgtxt TYPE bsik-sgtxt,
saknr TYPE bsik-saknr,
hkont TYPE bsik-hkont,
zlsch TYPE bsik-zlsch,
lifnr TYPE lfa1-lifnr,
name1 TYPE lfa1-name1,
line_color(4) TYPE c,
END OF SD_FINAL.
DATA IT_STD_BSAK LIKE TABLE OF SD_BSAK WITH HEADER LINE.
DATA IT_STD_BSIK LIKE TABLE OF SD_BSIK WITH HEADER LINE.
DATA IT_STD_LFA1 LIKE TABLE OF IT_LFA1 WITH HEADER LINE.
DATA IT_STD_FINAL LIKE TABLE OF IT_FINAL WITH HEADER LINE.
DATA IT_FINAL_DISPLAY LIKE TABLE OF SD_FINAL WITH HEADER LINE.
*SELECTION-SCREEN
SELECTION-SCREEN BEGIN OF BLOCK HEADER WITH FRAME TITLE TEXT-001.
PARAMETERS: P_BUKRS LIKE BSAK-BUKRS OBLIGATORY.
SELECT-OPTIONS : S_GJAHR FOR BSAK-GJAHR.
SELECT-OPTIONS: S_LIFNR FOR BSAK-LIFNR.
SELECT-OPTIONS: S_MONAT FOR BSAK-MONAT.
SELECTION-SCREEN END OF BLOCK HEADER.
START-OF-SELECTION.
SET PF-STATUS 'STATUS'.
PERFORM DATA_RETRIVAL.
PERFORM FIELD.
PERFORM EVENTS USING EVENTS.
PERFORM EVENTS_1 USING EVENTS.
PERFORM HEADER USING TOP.
PERFORM LAYOUT.
PERFORM DISPLAY.
END-OF-PAGE.
*& Form DATA_RETRIVAL
text
--> p1 text
<-- p2 text
FORM DATA_RETRIVAL .
SELECT BUKRS LIFNR UMSKS UMSKZ AUGDT AUGBL ZUONR GJAHR BELNR BUZEI BUDAT BLDAT XBLNR BLART
MONAT BSCHL ZUMSK SHKZG GSBER DMBTR WRBTR SGTXT SAKNR HKONT
FROM BSAK INTO TABLE IT_STD_BSAK
WHERE BUKRS = P_BUKRS
AND GJAHR IN S_GJAHR
AND LIFNR IN S_LIFNR
AND MONAT IN S_MONAT.
IF NOT IT_STD_BSAK[] IS INITIAL.
SELECT BUKRS LIFNR UMSKS UMSKZ AUGDT AUGBL ZUONR GJAHR BELNR BUZEI BUDAT BLDAT XBLNR
BLART MONAT BSCHL ZUMSK SHKZG GSBER DMBTR WRBTR SGTXT SAKNR HKONT ZLSCH
FROM BSIK INTO TABLE IT_STD_BSIK FOR ALL ENTRIES IN IT_STD_BSAK
WHERE BUKRS = IT_STD_BSAK-BUKRS AND LIFNR = IT_STD_BSAK-LIFNR AND GJAHR = IT_STD_BSAK-GJAHR .
ENDIF.
IF NOT IT_STD_BSAK[] IS INITIAL.
SELECT LIFNR NAME1
FROM LFA1 INTO TABLE IT_STD_LFA1 FOR ALL ENTRIES IN IT_STD_BSAK
WHERE LIFNR = IT_STD_BSAK-LIFNR.
ENDIF.
LOOP AT IT_STD_BSAK.
IT_STD_FINAL-BUKRS = IT_STD_BSAK-BUKRS.
IT_STD_FINAL-LIFNR = IT_STD_BSAK-LIFNR.
IT_STD_FINAL-UMSKS = IT_STD_BSAK-UMSKS.
IT_STD_FINAL-UMSKZ = IT_STD_BSAK-UMSKZ.
IT_STD_FINAL-AUGDT = IT_STD_BSAK-AUGDT.
IT_STD_FINAL-AUGBL = IT_STD_BSAK-AUGBL.
IT_STD_FINAL-ZUONR = IT_STD_BSAK-ZUONR.
IT_STD_FINAL-GJAHR = IT_STD_BSAK-GJAHR.
IT_STD_FINAL-BELNR = IT_STD_BSAK-BELNR.
IT_STD_FINAL-BUZEI = IT_STD_BSAK-BUZEI.
IT_STD_FINAL-BUDAT = IT_STD_BSAK-BUDAT.
IT_STD_FINAL-BLDAT = IT_STD_BSAK-BLDAT.
IT_STD_FINAL-XBLNR = IT_STD_BSAK-XBLNR.
IT_STD_FINAL-BLART = IT_STD_BSAK-BLART.
IT_STD_FINAL-MONAT = IT_STD_BSAK-MONAT.
IT_STD_FINAL-BSCHL = IT_STD_BSAK-BSCHL.
IT_STD_FINAL-ZUMSK = IT_STD_BSAK-ZUMSK.
IT_STD_FINAL-SHKZG = IT_STD_BSAK-SHKZG.
IT_STD_FINAL-GSBER = IT_STD_BSAK-GSBER.
IT_STD_FINAL-DMBTR = IT_STD_BSAK-DMBTR.
IT_STD_FINAL-WRBTR = IT_STD_BSAK-WRBTR.
IT_STD_FINAL-SGTXT = IT_STD_BSAK-SGTXT.
IT_STD_FINAL-SAKNR = IT_STD_BSAK-SAKNR.
IT_STD_FINAL-HKONT = IT_STD_BSAK-HKONT.
READ TABLE IT_STD_LFA1 WITH KEY LIFNR = IT_STD_FINAL-LIFNR.
IF SY-SUBRC = 0.
IT_STD_FINAL-NAME1 = IT_STD_LFA1-NAME1.
ENDIF.
APPEND IT_STD_FINAL.
CLEAR IT_STD_FINAL.
ENDLOOP.
LOOP AT IT_STD_BSIK.
IF SY-SUBRC = 0.
IT_STD_FINAL-BUKRS = IT_STD_BSIK-BUKRS.
IT_STD_FINAL-LIFNR = IT_STD_BSIK-LIFNR.
IT_STD_FINAL-UMSKS = IT_STD_BSIK-UMSKS.
IT_STD_FINAL-UMSKZ = IT_STD_BSIK-UMSKZ.
IT_STD_FINAL-AUGDT = IT_STD_BSIK-AUGDT.
IT_STD_FINAL-AUGBL = IT_STD_BSIK-AUGBL.
IT_STD_FINAL-ZUONR = IT_STD_BSIK-ZUONR.
IT_STD_FINAL-GJAHR = IT_STD_BSIK-GJAHR.
IT_STD_FINAL-BELNR = IT_STD_BSIK-BELNR.
IT_STD_FINAL-BUZEI = IT_STD_BSIK-BUZEI.
IT_STD_FINAL-BUDAT = IT_STD_BSIK-BUDAT.
IT_STD_FINAL-BLDAT = IT_STD_BSIK-BLDAT.
IT_STD_FINAL-XBLNR = IT_STD_BSIK-XBLNR.
IT_STD_FINAL-BLART = IT_STD_BSIK-BLART.
IT_STD_FINAL-MONAT = IT_STD_BSIK-MONAT.
IT_STD_FINAL-BSCHL = IT_STD_BSIK-BSCHL.
IT_STD_FINAL-ZUMSK = IT_STD_BSIK-ZUMSK.
IT_STD_FINAL-SHKZG = IT_STD_BSIK-SHKZG.
IT_STD_FINAL-GSBER = IT_STD_BSIK-GSBER.
IT_STD_FINAL-DMBTR = IT_STD_BSIK-DMBTR.
IT_STD_FINAL-WRBTR = IT_STD_BSIK-WRBTR.
IT_STD_FINAL-SGTXT = IT_STD_BSIK-SGTXT.
IT_STD_FINAL-SAKNR = IT_STD_BSIK-SAKNR.
IT_STD_FINAL-HKONT = IT_STD_BSIK-HKONT.
IT_STD_FINAL-ZLSCH = IT_STD_BSIK-ZLSCH.
ENDIF.
APPEND IT_STD_FINAL.
CLEAR IT_STD_FINAL.
ENDLOOP.
LOOP AT IT_STD_FINAL.
IF IT_STD_FINAL-SHKZG = 'S'.
IT_STD_FINAL-DMBTR_S = IT_STD_FINAL-DMBTR.
ELSE.
IF IT_STD_FINAL-SHKZG = 'H'.
IT_STD_FINAL-DMBTR_H = IT_STD_FINAL-DMBTR.
ENDIF.
ENDIF.
IT_STD_FINAL-DMBTR = ''.
MODIFY IT_STD_FINAL INDEX SY-TABIX TRANSPORTING DMBTR_H DMBTR_S DMBTR.
"VAR.
CLEAR IT_STD_FINAL.
ENDLOOP.
SORT IT_STD_FINAL BY LIFNR GSBER GJAHR.
ENDFORM. " DATA_RETRIVAL
*& Form FIELD
text
--> p1 text
<-- p2 text
form FIELD .
LCAT-FIELDNAME = 'LIFNR'.
LCAT-TABNAME = 'IT_STD_FINAL'.
LCAT-SELTEXT_L = 'Vendor No'.
LCAT-JUST = 'M'.
APPEND LCAT TO FIELDCAT.
CLEAR LCAT.
LCAT-FIELDNAME = 'NAME1'.
LCAT-TABNAME = 'IT_STD_FINAL'.
LCAT-SELTEXT_L = 'Vendor Name'.
LCAT-JUST = 'M'.
APPEND LCAT TO FIELDCAT.
CLEAR LCAT.
LCAT-FIELDNAME = 'GJAHR'.
LCAT-TABNAME = 'IT_STD_FINAL'.
LCAT-SELTEXT_L = 'Fiscal Year'.
LCAT-JUST = 'M'.
APPEND LCAT TO FIELDCAT.
CLEAR LCAT.
LCAT-FIELDNAME = 'GSBER'.
LCAT-TABNAME = 'IT_STD_FINAL'.
LCAT-SELTEXT_L = 'BussArea'.
LCAT-JUST = 'M'.
APPEND LCAT TO FIELDCAT.
CLEAR LCAT.
LCAT-FIELDNAME = 'DMBTR_S'.
LCAT-TABNAME = 'IT_STD_FINAL'.
LCAT-SELTEXT_L = 'Debit Balanace'.
LCAT-JUST = 'M'.
APPEND LCAT TO FIELDCAT.
CLEAR LCAT.
LCAT-FIELDNAME = 'DMBTR_H'.
LCAT-TABNAME = 'IT_STD_FINAL'.
LCAT-SELTEXT_L = 'Credit Balance'.
LCAT-JUST = 'M'.
APPEND LCAT TO FIELDCAT.
CLEAR LCAT.
LCAT-FIELDNAME = 'BAL'.
LCAT-TABNAME = 'IT_STD_FINAL'.
LCAT-SELTEXT_L = 'Accumulated Balance'.
LCAT-JUST = 'M'.
APPEND LCAT TO FIELDCAT.
CLEAR LCAT.
endform. " FIELD
*& Form DISPLAY
text
--> p1 text
<-- p2 text
form DISPLAY .
CLEAR: IT_STD_BSAK,IT_STD_BSIK, IT_STD_LFA1 .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_PF_STATUS_SET = 'STATUS '
I_CALLBACK_USER_COMMAND = ' '
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT = LAYOUT
IT_FIELDCAT = FIELDCAT[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT = IT_SORT
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS = EVENTS
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_HTML_HEIGHT_TOP = 0
I_HTML_HEIGHT_END = 0
IT_ALV_GRAPHICS =
IT_HYPERLINK =
IT_ADD_FIELDCAT =
IT_EXCEPT_QINFO =
IR_SALV_FULLSCREEN_ADAPTER =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = IT_CHARG
t_outtab = IT_STD_FINAL[]
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "DISPLAY
*& Form EVENTS
text
--> p1 text
<-- p2 text
form EVENTS USING P_EVENTS TYPE slis_t_event.
DATA: ls_event TYPE slis_alv_event.
ls_event-name = 'TOP_OF_PAGE'.
ls_event-form = 'TOP_OF_PAGE'.
APPEND ls_event TO P_EVENTS.
endform. " EVENTS
*& Form TOP_OF_PAGE
text
FORM TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = TOP.
ENDFORM. "TOP_OF_PAGE
*& Form LAYOUT
text
--> p1 text
<-- p2 text
form LAYOUT .
LAYOUT-ZEBRA = 'X'.
LAYOUT-INFO_FIELDNAME = 'LINE_COLOR'.
LAYOUT-COLWIDTH_OPTIMIZE = 'X'.
APPEND LAYOUT." TO LAYOUT.
endform. " LAYOUT
*& Form EVENTS_1
text
-->P_EVENTS text
FORM EVENTS_1 USING P_EVENTS TYPE slis_t_event.
DATA: ls_event TYPE slis_alv_event.
WRITE: SY-UNAME.
ls_event-name = 'END_OF_PAGE'.
ls_event-form = 'END_OF_PAGE'.
APPEND ls_event TO P_EVENTS.
ENDFORM. " EVENTS_1Seniors , Please Help me with this Requirment
BUKRS _____________________
GJAHR ____________________
LIFNR _____________________
MONAT _____________________
LIFNR NAME1 GSBER GJAHR HBAL SBAL ACCUMBAL
1001 ABB BUSS1 2005 300 00
ABB BUSS1 2005 00 100
300 100 (300-100)=200
ABB BUSS1 2006 200 00
ABB BUSS1 2006 200 00
400 00 (400-00)+ 200 =
600
ABB BUSS2 2005 300 00
ABB BUSS2 2005 00 100
300 100 ( 300-100) =200
ABB BUSS2 2006 400 00
ABB BUSS2 2006 00 100
400 100 (400-100)+200 =
500 ****************************************************************************
1400 300 (1400-300) **********************************************************************************************************
Same for the Next Vendor also...
This is the report for this Requirment i am working on....Please Help me in the Logic..How to Go on with it....
*& Report ZVENDOR_RECONCILLATION
REPORT ZVENDOR_RECONCILLATION.
TABLES : BSAK , BSIK , LFC1 , LFC3 , LFA1.
*ALV
TYPE-POOLS: SLIS.
*TYPE-POOLS icon.
DATA: It_SORT TYPE SLIS_T_SORTINFO_ALV ."WITH HEADER LINE.
DATA: TOP TYPE slis_t_listheader,
END TYPE slis_t_listheader,
EVENTS TYPE slis_t_event.
DATA : T_KEY TYPE SLIS_KEYINFO_ALV.
DATA : FIELDCAT TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE,
LAYOUT TYPE SLIS_LAYOUT_ALV OCCURS 1 WITH HEADER LINE ,
LCAT TYPE SLIS_FIELDCAT_ALV.
*INTERNAL TABLE
DATA: BEGIN OF sd_bsak,
bukrs TYPE bsak-bukrs,
lifnr TYPE bsak-lifnr,
umsks TYPE bsak-umsks,
umskz TYPE bsak-umskz,
augdt TYPE bsak-augdt,
augbl TYPE bsak-augbl,
zuonr TYPE bsak-zuonr,
gjahr TYPE bsak-gjahr,
belnr TYPE bsak-belnr,
buzei TYPE bsak-buzei,
budat TYPE bsak-budat,
bldat TYPE bsak-bldat,
xblnr TYPE bsak-xblnr,
blart TYPE bsak-blart,
monat TYPE bsak-monat,
bschl TYPE bsak-bschl,
zumsk TYPE bsak-zumsk,
shkzg TYPE bsak-shkzg,
gsber TYPE bsak-gsber,
dmbtr TYPE bsak-dmbtr,
wrbtr TYPE bsak-wrbtr,
sgtxt TYPE bsak-sgtxt,
saknr TYPE bsak-saknr,
hkont TYPE bsak-hkont,
END OF sd_bsak.
DATA: BEGIN OF sd_bsik,
bukrs TYPE bsik-bukrs,
lifnr TYPE bsik-lifnr,
umsks TYPE bsik-umsks,
umskz TYPE bsik-umskz,
augdt TYPE bsik-augdt,
augbl TYPE bsik-augbl,
zuonr TYPE bsik-zuonr,
gjahr TYPE bsik-gjahr,
belnr TYPE bsik-belnr,
buzei TYPE bsik-buzei,
budat TYPE bsik-budat,
bldat TYPE bsik-bldat,
xblnr TYPE bsik-xblnr,
blart TYPE bsik-blart,
monat TYPE bsik-monat,
bschl TYPE bsik-bschl,
zumsk TYPE bsik-zumsk,
shkzg TYPE bsik-shkzg,
gsber TYPE bsik-gsber,
dmbtr TYPE bsik-dmbtr,
wrbtr TYPE bsik-wrbtr,
sgtxt TYPE bsik-sgtxt,
saknr TYPE bsik-saknr,
hkont TYPE bsik-hkont,
zlsch TYPE bsik-zlsch,
END OF sd_bsik.
DATA: BEGIN OF it_lfa1,
lifnr TYPE lfa1-lifnr,
name1 TYPE lfa1-name1,
END OF it_lfa1.
*FINAL INTERNAL TABLE DECLARATION
DATA: BEGIN OF IT_FINAL,
lifnr TYPE bsak-lifnr,
gsber TYPE bsak-gsber,
bukrs TYPE bsak-bukrs,
umsks TYPE bsak-umsks,
umskz TYPE bsak-umskz,
augdt TYPE bsak-augdt,
augbl TYPE bsak-augbl,
zuonr TYPE bsak-zuonr,
gjahr TYPE bsak-gjahr,
belnr TYPE bsak-belnr,
buzei TYPE bsak-buzei,
budat TYPE bsak-budat,
bldat TYPE bsak-bldat,
xblnr TYPE bsak-xblnr,
blart TYPE bsak-blart,
monat TYPE bsak-monat,
bschl TYPE bsak-bschl,
zumsk TYPE bsak-zumsk,
shkzg TYPE bsak-shkzg,
gsber TYPE bsak-gsber,
dmbtr TYPE bsak-dmbtr,
wrbtr TYPE bsak-wrbtr,
sgtxt TYPE bsak-sgtxt,
saknr TYPE bsak-saknr,
hkont TYPE bsak-hkont,
DMBTR_S TYPE BSAK-DMBTR,
DMBTR_H TYPE BSAK-DMBTR,
DS TYPE P DECIMALS 2,
DH TYPE P DECIMALS 2,
SUB TYPE P DECIMALS 2,
ADD TYPE P DECIMALS 2,
BAL TYPE P DECIMALS 2,
lifnr TYPE bsik-lifnr,
umsks TYPE bsik-umsks,
umskz TYPE bsik-umskz,
augdt TYPE bsik-augdt,
augbl TYPE bsik-augbl,
zuonr TYPE bsik-zuonr,
gjahr TYPE bsik-gjahr,
belnr TYPE bsik-belnr,
buzei TYPE bsik-buzei,
budat TYPE bsik-budat,
bldat TYPE bsik-bldat,
xblnr TYPE bsik-xblnr,
blart TYPE bsik-blart,
monat TYPE bsik-monat,
bschl TYPE bsik-bschl,
zumsk TYPE bsik-zumsk,
shkzg TYPE bsik-shkzg,
gsber TYPE bsik-gsber,
dmbtr TYPE bsik-dmbtr,
wrbtr TYPE bsik-wrbtr,
sgtxt TYPE bsik-sgtxt,
saknr TYPE bsik-saknr,
hkont TYPE bsik-hkont,
zlsch TYPE bsik-zlsch,
lifnr TYPE lfa1-lifnr,
name1 TYPE lfa1-name1,
END OF IT_FINAL.
DATA: BEGIN OF SD_FINAL,
gsber TYPE bsak-gsber,
lifnr TYPE bsak-lifnr,
bukrs TYPE bsak-bukrs,
lifnr TYPE bsak-lifnr,
umsks TYPE bsak-umsks,
umskz TYPE bsak-umskz,
augdt TYPE bsak-augdt,
augbl TYPE bsak-augbl,
zuonr TYPE bsak-zuonr,
gjahr TYPE bsak-gjahr,
belnr TYPE bsak-belnr,
buzei TYPE bsak-buzei,
budat TYPE bsak-budat,
bldat TYPE bsak-bldat,
xblnr TYPE bsak-xblnr,
blart TYPE bsak-blart,
monat TYPE bsak-monat,
bschl TYPE bsak-bschl,
zumsk TYPE bsak-zumsk,
shkzg TYPE bsak-shkzg,
dmbtr TYPE bsak-dmbtr,
wrbtr TYPE bsak-wrbtr,
sgtxt TYPE bsak-sgtxt,
saknr TYPE bsak-saknr,
hkont TYPE bsak-hkont,
bukrs TYPE bsik-bukrs,
lifnr TYPE bsik-lifnr,
umsks TYPE bsik-umsks,
umskz TYPE bsik-umskz,
augdt TYPE bsik-augdt,
augbl TYPE bsik-augbl,
zuonr TYPE bsik-zuonr,
gjahr TYPE bsik-gjahr,
belnr TYPE bsik-belnr,
buzei TYPE bsik-buzei,
budat TYPE bsik-budat,
bldat TYPE bsik-bldat,
xblnr TYPE bsik-xblnr,
blart TYPE bsik-blart,
monat TYPE bsik-monat,
bschl TYPE bsik-bschl,
zumsk TYPE bsik-zumsk,
shkzg TYPE bsik-shkzg,
gsber TYPE bsik-gsber,
dmbtr TYPE bsik-dmbtr,
wrbtr TYPE bsik-wrbtr,
sgtxt TYPE bsik-sgtxt,
saknr TYPE bsik-saknr,
hkont TYPE bsik-hkont,
zlsch TYPE bsik-zlsch,
lifnr TYPE lfa1-lifnr,
name1 TYPE lfa1-name1,
line_color(4) TYPE c,
END OF SD_FINAL.
DATA IT_STD_BSAK LIKE TABLE OF SD_BSAK WITH HEADER LINE.
DATA IT_STD_BSIK LIKE TABLE OF SD_BSIK WITH HEADER LINE.
DATA IT_STD_LFA1 LIKE TABLE OF IT_LFA1 WITH HEADER LINE.
DATA IT_STD_FINAL LIKE TABLE OF IT_FINAL WITH HEADER LINE.
DATA IT_FINAL_DISPLAY LIKE TABLE OF SD_FINAL WITH HEADER LINE.
*SELECTION-SCREEN
SELECTION-SCREEN BEGIN OF BLOCK HEADER WITH FRAME TITLE TEXT-001.
PARAMETERS: P_BUKRS LIKE BSAK-BUKRS OBLIGATORY.
SELECT-OPTIONS : S_GJAHR FOR BSAK-GJAHR.
SELECT-OPTIONS: S_LIFNR FOR BSAK-LIFNR.
SELECT-OPTIONS: S_MONAT FOR BSAK-MONAT.
SELECTION-SCREEN END OF BLOCK HEADER.
START-OF-SELECTION.
SET PF-STATUS 'STATUS'.
PERFORM DATA_RETRIVAL.
PERFORM FIELD.
PERFORM EVENTS USING EVENTS.
PERFORM EVENTS_1 USING EVENTS.
PERFORM HEADER USING TOP.
PERFORM LAYOUT.
PERFORM DISPLAY.
END-OF-PAGE.
*& Form DATA_RETRIVAL
text
--> p1 text
<-- p2 text
FORM DATA_RETRIVAL .
SELECT BUKRS LIFNR UMSKS UMSKZ AUGDT AUGBL ZUONR GJAHR BELNR BUZEI BUDAT BLDAT XBLNR BLART
MONAT BSCHL ZUMSK SHKZG GSBER DMBTR WRBTR SGTXT SAKNR HKONT
FROM BSAK INTO TABLE IT_STD_BSAK
WHERE BUKRS = P_BUKRS
AND GJAHR IN S_GJAHR
AND LIFNR IN S_LIFNR
AND MONAT IN S_MONAT.
IF NOT IT_STD_BSAK[] IS INITIAL.
SELECT BUKRS LIFNR UMSKS UMSKZ AUGDT AUGBL ZUONR GJAHR BELNR BUZEI BUDAT BLDAT XBLNR
BLART MONAT BSCHL ZUMSK SHKZG GSBER DMBTR WRBTR SGTXT SAKNR HKONT ZLSCH
FROM BSIK INTO TABLE IT_STD_BSIK FOR ALL ENTRIES IN IT_STD_BSAK
WHERE BUKRS = IT_STD_BSAK-BUKRS AND LIFNR = IT_STD_BSAK-LIFNR AND GJAHR = IT_STD_BSAK-GJAHR .
ENDIF.
IF NOT IT_STD_BSAK[] IS INITIAL.
SELECT LIFNR NAME1
FROM LFA1 INTO TABLE IT_STD_LFA1 FOR ALL ENTRIES IN IT_STD_BSAK
WHERE LIFNR = IT_STD_BSAK-LIFNR.
ENDIF.
LOOP AT IT_STD_BSAK.
IT_STD_FINAL-BUKRS = IT_STD_BSAK-BUKRS.
IT_STD_FINAL-LIFNR = IT_STD_BSAK-LIFNR.
IT_STD_FINAL-UMSKS = IT_STD_BSAK-UMSKS.
IT_STD_FINAL-UMSKZ = IT_STD_BSAK-UMSKZ.
IT_STD_FINAL-AUGDT = IT_STD_BSAK-AUGDT.
IT_STD_FINAL-AUGBL = IT_STD_BSAK-AUGBL.
IT_STD_FINAL-ZUONR = IT_STD_BSAK-ZUONR.
IT_STD_FINAL-GJAHR = IT_STD_BSAK-GJAHR.
IT_STD_FINAL-BELNR = IT_STD_BSAK-BELNR.
IT_STD_FINAL-BUZEI = IT_STD_BSAK-BUZEI.
IT_STD_FINAL-BUDAT = IT_STD_BSAK-BUDAT.
IT_STD_FINAL-BLDAT = IT_STD_BSAK-BLDAT.
IT_STD_FINAL-XBLNR = IT_STD_BSAK-XBLNR.
IT_STD_FINAL-BLART = IT_STD_BSAK-BLART.
IT_STD_FINAL-MONAT = IT_STD_BSAK-MONAT.
IT_STD_FINAL-BSCHL = IT_STD_BSAK-BSCHL.
IT_STD_FINAL-ZUMSK = IT_STD_BSAK-ZUMSK.
IT_STD_FINAL-SHKZG = IT_STD_BSAK-SHKZG.
IT_STD_FINAL-GSBER = IT_STD_BSAK-GSBER.
IT_STD_FINAL-DMBTR = IT_STD_BSAK-DMBTR.
IT_STD_FINAL-WRBTR = IT_STD_BSAK-WRBTR.
IT_STD_FINAL-SGTXT = IT_STD_BSAK-SGTXT.
IT_STD_FINAL-SAKNR = IT_STD_BSAK-SAKNR.
IT_STD_FINAL-HKONT = IT_STD_BSAK-HKONT.
READ TABLE IT_STD_LFA1 WITH KEY LIFNR = IT_STD_FINAL-LIFNR.
IF SY-SUBRC = 0.
IT_STD_FINAL-NAME1 = IT_STD_LFA1-NAME1.
ENDIF.
APPEND IT_STD_FINAL.
CLEAR IT_STD_FINAL.
ENDLOOP.
LOOP AT IT_STD_BSIK.
IF SY-SUBRC = 0.
IT_STD_FINAL-BUKRS = IT_STD_BSIK-BUKRS.
IT_STD_FINAL-LIFNR = IT_STD_BSIK-LIFNR.
IT_STD_FINAL-UMSKS = IT_STD_BSIK-UMSKS.
IT_STD_FINAL-UMSKZ = IT_STD_BSIK-UMSKZ.
IT_STD_FINAL-AUGDT = IT_STD_BSIK-AUGDT.
IT_STD_FINAL-AUGBL = IT_STD_BSIK-AUGBL.
IT_STD_FINAL-ZUONR = IT_STD_BSIK-ZUONR.
IT_STD_FINAL-GJAHR = IT_STD_BSIK-GJAHR.
IT_STD_FINAL-BELNR = IT_STD_BSIK-BELNR.
IT_STD_FINAL-BUZEI = IT_STD_BSIK-BUZEI.
IT_STD_FINAL-BUDAT = IT_STD_BSIK-BUDAT.
IT_STD_FINAL-BLDAT = IT_STD_BSIK-BLDAT.
IT_STD_FINAL-XBLNR = IT_STD_BSIK-XBLNR.
IT_STD_FINAL-BLART = IT_STD_BSIK-BLART.
IT_STD_FINAL-MONAT = IT_STD_BSIK-MONAT.
IT_STD_FINAL-BSCHL = IT_STD_BSIK-BSCHL.
IT_STD_FINAL-ZUMSK = IT_STD_BSIK-ZUMSK.
IT_STD_FINAL-SHKZG = IT_STD_BSIK-SHKZG.
IT_STD_FINAL-GSBER = IT_STD_BSIK-GSBER.
IT_STD_FINAL-DMBTR = IT_STD_BSIK-DMBTR.
IT_STD_FINAL-WRBTR = IT_STD_BSIK-WRBTR.
IT_STD_FINAL-SGTXT = IT_STD_BSIK-SGTXT.
IT_STD_FINAL-SAKNR = IT_STD_BSIK-SAKNR.
IT_STD_FINAL-HKONT = IT_STD_BSIK-HKONT.
IT_STD_FINAL-ZLSCH = IT_STD_BSIK-ZLSCH.
ENDIF.
APPEND IT_STD_FINAL.
CLEAR IT_STD_FINAL.
ENDLOOP.
LOOP AT IT_STD_FINAL.
IF IT_STD_FINAL-SHKZG = 'S'.
IT_STD_FINAL-DMBTR_S = IT_STD_FINAL-DMBTR.
ELSE.
IF IT_STD_FINAL-SHKZG = 'H'.
IT_STD_FINAL-DMBTR_H = IT_STD_FINAL-DMBTR.
ENDIF.
ENDIF.
IT_STD_FINAL-DMBTR = ''.
MODIFY IT_STD_FINAL INDEX SY-TABIX TRANSPORTING DMBTR_H DMBTR_S DMBTR.
"VAR.
CLEAR IT_STD_FINAL.
ENDLOOP.
SORT IT_STD_FINAL BY LIFNR GSBER GJAHR.
ENDFORM. " DATA_RETRIVAL
*& Form FIELD
text
--> p1 text
<-- p2 text
form FIELD .
LCAT-FIELDNAME = 'LIFNR'.
LCAT-TABNAME = 'IT_STD_FINAL'.
LCAT-SELTEXT_L = 'Vendor No'.
LCAT-JUST = 'M'.
APPEND LCAT TO FIELDCAT.
CLEAR LCAT.
LCAT-FIELDNAME = 'NAME1'.
LCAT-TABNAME = 'IT_STD_FINAL'.
LCAT-SELTEXT_L = 'Vendor Name'.
LCAT-JUST = 'M'.
APPEND LCAT TO FIELDCAT.
CLEAR LCAT.
LCAT-FIELDNAME = 'GJAHR'.
LCAT-TABNAME = 'IT_STD_FINAL'.
LCAT-SELTEXT_L = 'Fiscal Year'.
LCAT-JUST = 'M'.
APPEND LCAT TO FIELDCAT.
CLEAR LCAT.
LCAT-FIELDNAME = 'GSBER'.
LCAT-TABNAME = 'IT_STD_FINAL'.
LCAT-SELTEXT_L = 'BussArea'.
LCAT-JUST = 'M'.
APPEND LCAT TO FIELDCAT.
CLEAR LCAT.
LCAT-FIELDNAME = 'DMBTR_S'.
LCAT-TABNAME = 'IT_STD_FINAL'.
LCAT-SELTEXT_L = 'Debit Balanace'.
LCAT-JUST = 'M'.
APPEND LCAT TO FIELDCAT.
CLEAR LCAT.
LCAT-FIELDNAME = 'DMBTR_H'.
LCAT-TABNAME = 'IT_STD_FINAL'.
LCAT-SELTEXT_L = 'Credit Balance'.
LCAT-JUST = 'M'.
APPEND LCAT TO FIELDCAT.
CLEAR LCAT.
LCAT-FIELDNAME = 'BAL'.
LCAT-TABNAME = 'IT_STD_FINAL'.
LCAT-SELTEXT_L = 'Accumulated Balance'.
LCAT-JUST = 'M'.
APPEND LCAT TO FIELDCAT.
CLEAR LCAT.
endform. " FIELD
*& Form DISPLAY
text
--> p1 text
<-- p2 text
form DISPLAY .
CLEAR: IT_STD_BSAK,IT_STD_BSIK, IT_STD_LFA1 .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_PF_STATUS_SET = 'STATUS '
I_CALLBACK_USER_COMMAND = ' '
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT = LAYOUT
IT_FIELDCAT = FIELDCAT[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT = IT_SORT
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS = EVENTS
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_HTML_HEIGHT_TOP = 0
I_HTML_HEIGHT_END = 0
IT_ALV_GRAPHICS =
IT_HYPERLINK =
IT_ADD_FIELDCAT =
IT_EXCEPT_QINFO =
IR_SALV_FULLSCREEN_ADAPTER =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = IT_CHARG
t_outtab = IT_STD_FINAL[]
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "DISPLAY
*& Form EVENTS
text
--> p1 text
<-- p2 text
form EVENTS USING P_EVENTS TYPE slis_t_event.
DATA: ls_event TYPE slis_alv_event.
ls_event-name = 'TOP_OF_PAGE'.
ls_event-form = 'TOP_OF_PAGE'.
APPEND ls_event TO P_EVENTS.
endform. " EVENTS
*& Form TOP_OF_PAGE
text
FORM TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = TOP.
ENDFORM. "TOP_OF_PAGE
*& Form LAYOUT
text
--> p1 text
<-- p2 text
form LAYOUT .
LAYOUT-ZEBRA = 'X'.
LAYOUT-INFO_FIELDNAME = 'LINE_COLOR'.
LAYOUT-COLWIDTH_OPTIMIZE = 'X'.
APPEND LAYOUT." TO LAYOUT.
endform. " LAYOUT
*& Form EVENTS_1
text
-->P_EVENTS text
FORM EVENTS_1 USING P_EVENTS TYPE slis_t_event.
DATA: ls_event TYPE slis_alv_event.
WRITE: SY-UNAME.
ls_event-name = 'END_OF_PAGE'.
ls_event-form = 'END_OF_PAGE'.
APPEND ls_event TO P_EVENTS.
ENDFORM. " EVENTS_1 -
Please help me with random crashes of Firefox 7.1.
Please help me with random crashes of Firefox 7.1. I'm not sophisticated enough to give you programming data. The ting is I'd like to continue to use this browser, but feel that I can't due to very frequent crashes...which causes loss of info and restarts w/ the report to Mozilla Firefox. By the way no results from anyone on that one. I have Win 7, an HP G-60, and communicate on FB, use You tube, Gmail, Yahoo. Not asking for much, eh! just want a fix, please.
On those three additional crashes,
1. bp-17c22279-819e-4a88-8b58-fa8462111015 10/15/2011 6:56 PM
2. bp-afd73520-df86-4f77-90c3-a4dd12111015 10/15/2011 6:09 PM
3. bp-609de88e-d1a3-496e-8374-a9be52111015 10/15/2011 6:09 PM
I found the three crash reports here:
1. https://crash-stats.mozilla.com/report/index/17c22279-819e-4a88-8b58-fa8462111015
ID: 17c22279-819e-4a88-8b58-fa8462111015
Signature: JSLinearString::mark(JSTracer*)
Related bug: [https://bugzilla.mozilla.org/show_bug.cgi?id=686441 686441] NEW Crash in JSLinearString::mark(JSTracer*) or JSString::mark(JSTracer*) mainly with Better Facebook
2. https://crash-stats.mozilla.com/report/index/afd73520-df86-4f77-90c3-a4dd12111015
ID: afd73520-df86-4f77-90c3-a4dd12111015
Signature: js::gc::ScanRope
Related bug: [https://bugzilla.mozilla.org/show_bug.cgi?id=668583 668583] NEW Firefox 7.0a1 Crash @ js::gc::ScanRope mainly with Better Facebook
3. https://crash-stats.mozilla.com/report/index/609de88e-d1a3-496e-8374-a9be52111015
ID: 609de88e-d1a3-496e-8374-a9be52111015
Signature: JSLinearString::mark(JSTracer*)
Related bug: [https://bugzilla.mozilla.org/show_bug.cgi?id=686441 686441] NEW Crash in JSLinearString::mark(JSTracer*) or JSString::mark(JSTracer*) mainly with Better Facebook
All three crash reports link bugs that mention Better Facebook, which you said you disabled so something else is the problem. Open the Firefox '''Help''' menu, click on '''Troubleshooting Information''' and in the ''about:support'' page that opens, click "copy all to clipboard" and paste everything here (see [[Using the Troubleshooting Information page]] for more info).
Also, could you restart in Firefox [[Safe Mode]] and do normal browsing to your usual sites to see if you still get any crashes? -
First of all, I live in Ho Chi Minh City, Vietnam. Sometimes, I use a VPN to search on the web here. I purchased Toy Story 3 on my MacBook Pro 2011 OS/X - Lion through iTunes. I initially had trouble downloading it which may be due to being on and off the VPN but after a while it finally downloaded and shows up in my iTunes library on my MacBook.
Under my Apple ID account (which is the only Apple ID account I have), I look under purchase history and it shows that I paid for Toy Story which is where I got my Order # from. But if you go to the iTunes Store then to the Quick Links then click on Purchased, under all my Movies, it does NOT show Toy Story 3 as one of my movies.
Now when I go to my iPad (3rd gen.), Toy Story 3 does not show up under purchased movies (all or not on my iPad). It does not show up on my Apple TV as well. If I want to have Toy Story 3 on my iPad or Apple TV, then it says I have to purchase it again.
I have searched for help via Apple support communities but so far none of their solutions have worked for me. I have tried logging off iTunes & App Store on iPad and also shutting down the iPad. I also made sure that under iTunes Preferences>Store that iTunes in the Clouds purchases is checked. Can someone please help me with this? Your consideration is greatly appreciated. Thanks.Thanks King_Penguin for taking time to read and reply.
I just purchased this movie on Thursday, May 15, so just a few days ago. I have never had any trouble whatsoever since I have been in Vietnam. I have downloaded several movies and even music and they have all synced to my respected Apple products except for this purchase.
Sorry, I don't quite understand what you mean by studios and different versions. Could you please explain?
I checked my purchased list in my purchase history under my account and there are no hidden items. -
I just bought this movie "Godzilla 2014" but it won't show in my Movie Library. I closed my Itunes and put it back on again but still won't show up. I checked my purchased list and it shows that I recently bought the movie but when I checked the itunes store it wants to buy the movie again. Please help me with this right away Apple.
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Contacting Apple for support and service - this includes
international calling numbers..
For Mac App Store: Apple - Support - Mac App Store.
For iTunes: Apple - Support - iTunes. -
HELP!!!! My Hotmail no longer works with Safari v. 5.0.6 and my Imac Leopard operating system 10.5.8. Please help me with any suggestions on what to do. Thank you. I cannot find any new downloads for Safari that work with Leopard. The newest ones only work with Lion. My Firefox browser still works though but I would rather use Safari and cannot access any e-mails or send any e-mails via Safari. This happened about 3 weeks ago and I thought it was just a glitch on Hotmail's site. Now I realize Hotmail must have released an update that no longer works with Leopard 10.5.8. PLEASE HELP ME!!!! Thanks to anyone and everyone who reads this and attempts to help me. I do not know what to do....
Hi Sue,
What exactly happens when trying Safari?
They did change it to Outlook recently, but while not pretty, I can access mine with Safari 4.0 still...
You can also set it up in Mail so you don't need a browser at all if you want. -
Hello, Honestly I just updated my 4s and my iPad 3 to iOS 6 and when try to press on the Music app or the iTunes app it says "cannot connect to iTunes Store" Could you please help me with this thank you so much, Charbel from Lebanon
See these previous discussions help.
App Store Updates (but only Updates)...: Apple Support Communities
Apps suddenly don't update: Apple Support Communities -
Please help me with an error 1418...
OK I have iPod mini 4GB and I have the latest iTunes installed 7.02 or something I don't know anymore.
Anyway a sad iPod icon displayed on my screen a few days ago and I managed to restart it and to put it in a disk mode and then iTunes finally recognized iPod and I clicked on Restore and then Restore and Updated and after a few seconds during the restore process it says:
An iPod 'iPod' couldn't be resoterd. An unknown error occurred (1418).
I am desperate and i don't know what to do.
I read almost everything about this but nothing helped.
Please help me with any kind of solution...I did a Support Search for that error number and this is what I got. I hope one of these links helps:
http://docs.info.apple.com/article.html?artnum=304508
http://docs.info.apple.com/article.html?artnum=304996 -
I cannot install Itunes and Icloud on my Sony Vaio Laptop - Window 7. Error says " computer/system not modified". Please help me with this problem.
Hello there, jag123059.
The following Knowledge Base article offers up some great steps to follow for resolving issues with installing iTunes:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
Hi there. Can someone please help me with copying photos from my old iPad to my new one? Thanks.
Hi there. Can someone please help me with copying photos from my old iPad to my new ipad2? Thanks.
If you have a pc, when you plug your iPad in you should see the windows pop up window offering to backup the photos. Do that and it will save all your photos and videos to your computer where you can then sync them back to your new one.
If the pop up doesn't come up, double click on my computer and navigate your way to the iPad. Double cick on it an d navigate to the DCIM folder. Drag your photos and videos to your pc, then sync them back onto your iPad. -
Query Issue in Creating a View....Please help me with this query..
I would like to create a view on this table with four columns
1. PN#_EXP_DATE
2. PN#
3. PN#_EFF_DATE
4. PN#
P_S_C A_C P EXP_DT
21698 13921 1 5/29/2009 3:15:41 PM
21698 13921 1 5/29/2009 3:54:57 PM
21698 1716656 4 5/29/2009 3:15:41 PM
21698 3217 3 5/29/2009 3:15:40 PM
21698 3217 3 5/29/2009 3:54:57 PM
21698 60559 2 5/29/2009 3:15:41 PM
21698 60559 2 5/29/2009 3:54:57 PM
I have a trigger on A, which inserts the DML records into B. (Table A and B structure is the almost the same,
where table B will have one extra column exp_dt)
NOw Table B can have records with same P_S_C and A_C columns and exp_dt will capture the history.
for example: from the above sample data, let us take first two records..
P_S_C A_C P EXP_DT
21698 13921 1 5/29/2009 3:15:41 PM --- Record 1
21698 13921 1 5/29/2009 3:54:57 PM --- Record 2
from this..
Note: 1. Table A and Table C can be joined using A.P_S_C and C.R_C to get the start_date.
2. PN# comes from table D. It contains numbers for the resp. weeks.
3. PN#_EFF_DATE is the previous immediate previous date for that record in history table (Table B).
I wanted the data like..
---- this is for the second record in the above..
PN#_EXP_DATE PN# PN#_EFF_DATE PN#
5/29/2009 3:54:57 PM 214 5/29/2009 3:15:41 PM 214
---- this is for the first record in the above..
PN#_EXP_DATE PN# PN#_EFF_DATE PN#
5/29/2009 3:54:41 PM 214 ( for this we should query the table C to get the
start_date, for this combinatation of P_S_C and A_C in table B
where B.P_S_C = C.A_C
and that value should be the EFF_DT for this record)
Please help me with this....
Thanks in advance..Hi All,
select d.P# as "PN#_EXP_DATE", exp_date
from daily_prd d, cbs1_assoc_hist b
where to_char(d.day_date,'MM/DD/YYYY') = to_char(b.exp_date,'MM/DD/YYYY')
and d.period_type = 'TIMEREPORT';
This above query gives the output as follows:
pn#_exp_date exp_date
214 5/29/2009 3:15:40 PM
214 5/29/2009 3:15:41 PM
214 5/29/2009 3:15:41 PM
214 5/29/2009 3:15:41 PM
214 5/29/2009 3:54:57 PM
214 5/29/2009 3:54:57 PM
214 5/29/2009 3:54:57 PM
This below is the data from history table (Table B).
P_S_C A_C PLACE EXP_DATE
21698 3217 3 5/29/2009 3:15:40 PM
21698 13921 1 5/29/2009 3:15:41 PM
21698 1716656 4 5/29/2009 3:15:41 PM
21698 60559 2 5/29/2009 3:15:41 PM
21698 13921 1 5/29/2009 3:54:57 PM
21698 3217 3 5/29/2009 3:54:57 PM
21698 60559 2 5/29/2009 3:54:57 PM
I got the pn#_exp_date from the Table 'D', for the given exp_date from Table B.
My question is again....
CASE - 1
from the given records above, I need to look for exp_date for the given same P_S_C and A_C.
in this case we can take the example...
P_S_C A_C PLACE EXP_DATE
21698 3217 3 5/29/2009 3:15:40 PM
21698 3217 3 5/29/2009 3:54:57 PM
In this case, the
pn#_exp_date exp_date pn#_eff_date eff_date
214 5/29/2009 3:15:57 PM < PN# corresponding to the 5/29/2009 3:15:40 PM
eff_date .>
<Basically the eff_date is
nothing but the exp_date only.
we should take the immediate before one.
In this case, our eff_date is '5/29/2009 3:15:40 PM'.
but how to get this.
CASE - 2
from the above sample data, consider this
P_S_C A_C PLACE EXP_DATE
21698 1716656 4 5/29/2009 3:15:41 PM
In this case, there is only one record for the P_S_C and A_C combination.
The expected result :
pn#_exp_date exp_date pn#_eff_date eff_date
214 5/29/2009 3:15:41 PM < PN# corresponding to the 5/29/2009 3:15:40 PM
eff_date .>
<Basically the eff_date is
nothing but the exp_date only.
we should take the immediate before one.
In this case to get the eff_date, we should query the Table 'C', to get the eff_date, which is START_DT column in this table.
for this join B.P_S_C and C.R_C.
Hope I am clear now..
Thanks in advance.....
Maybe you are looking for
-
I am trying to synch my husband's I Phone and cannot. i have already done mine, which is identical to his. When I try to synch his, I get the message that i need to download the latest version of i tunes, which i have done. Each time i try to sync
-
I am using dvips to generate ps files. In ghostview, there are page numbers visible. Once printed, however, all the page numbers are gone. What could be wrong? TIA.
-
hi, I wrote some test client for testing my server. I create URL and call URL.getContent(). This open new session. But I want use one session. How I can use request for same session? <code> for (int i=0; i<10; i++) URL url = new URL(BASE_ADDRESS + "/
-
Not enough free space? I've scoured the forum to no avail....
so my 30g 5th USED to fill up with a random selection of songs .... now when I plug it in to sync it it tells me "not enough free space ...." (my library is in excess of 250g's of music). I checked all the settings in iTunes and the best I can manage
-
I made a website which runs locally in a public museum. So I need to use firefox in fullscreen always, so that the customers would not have acces anywhere else but the site I created. I used HTML5, and JWPlayer for watching the videos. There was no p