Please help me with setting up JMF on xp
Hi,
I've installed JMF, but when I try to run the JMF Diagnostics Applet I get the following error:
java.lang.ClassNotFoundException: JMFDiagnostics
I'm sure I have set the correct classpath variables,i.e.
c:\java\JMF2.1.1E\lib\sound.jar;
c:\java\JMF2.1.1E\lib\jmf.jar;
c:\java\JMF2.1.1E\lib\custom.jar;
c:\java\JMF2.1.1E\bin;
c:\java\JMF2.1.1E\lib;
but I just can't get it to work.
I would really appreciate some guidance here so I can make some progress.
Thanks
I have been using JMF and developing JMF applications on Windows XP. There is no problem.
I suggest that you install "JMF windows performance kit". After you have installed it, check your CLASSPATH variables under My Computer -> Advance ->Environment Variables.
Check if the CLASSPATH variable exists in System variables and User variables. If you find CLASSPATH variables in both System and User variables you should combine them into one, i.e., only one CLASSPATH variable should exists. It could either be in User Variables or System variables. But never in both places.
After that check that your "<java installation directory>\bin" path is the first path int the PATH environment variable. Again this can either be under System or User but should never exist in both places.
After that you can try and run Diaganostic Applet again to see if everything is alright...
good luck.
soe
Similar Messages
-
TS3276 Please help me with setting up the email.
I have set up a new email. The message states it cannot use the port 995. Please help me with this. Thank you
E-mail provider and is the account IMAP or POP? What message says it can't use port 995?
-
Question
Sir Please Help Me With My Homepage. When I Set My Home Page To About:home It Gives An Error Saying Url Not Valid... Please Tell Me how to Fix this!I'm not seeing a screenshot, so could you please try another time to attach one?
*http://en.wikipedia.org/wiki/Screenshot
Use a compressed image type like PNG or JPG to save the screenshot and make sure that you do not exceed the maximum file size (1 MB).
Make sure that you use the location bar and not the (Google) search bar.
*http://kb.mozillazine.org/Toolbar_customization
*https://support.mozilla.org/kb/Back+and+forward+or+other+toolbar+items+are+missing -
HELP!!!! My Hotmail no longer works with Safari v. 5.0.6 and my Imac Leopard operating system 10.5.8. Please help me with any suggestions on what to do. Thank you. I cannot find any new downloads for Safari that work with Leopard. The newest ones only work with Lion. My Firefox browser still works though but I would rather use Safari and cannot access any e-mails or send any e-mails via Safari. This happened about 3 weeks ago and I thought it was just a glitch on Hotmail's site. Now I realize Hotmail must have released an update that no longer works with Leopard 10.5.8. PLEASE HELP ME!!!! Thanks to anyone and everyone who reads this and attempts to help me. I do not know what to do....
Hi Sue,
What exactly happens when trying Safari?
They did change it to Outlook recently, but while not pretty, I can access mine with Safari 4.0 still...
You can also set it up in Mail so you don't need a browser at all if you want. -
Please help me with the following two questions, very urgent
Hi All,
Please help me with some scenerios about what are the common problems when modifying a standard script such a standard Invoice script and how can we overcome them.
What are the common problems encountered when working with SAP SMARTFORMS and how to overcome them?
Please help me with these questions, its very urgent.
Thanks in advance.
MD.hi
hope it will help you.
reward if ehlp.
How to create a New smartfrom, it is having step by step procedure
http://sap.niraj.tripod.com/id67.html
step by step good ex link is....
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
Here is the procedure
1. Create a new smartforms
Transaction code SMARTFORMS
Create new smartforms call ZSMART
2. Define looping process for internal table
Pages and windows
First Page -> Header Window (Cursor at First Page then click Edit -> Node -> Create)
Here, you can specify your title and page numbering
&SFSY-PAGE& (Page 1) of &SFSY-FORMPAGES(Z4.0)& (Total Page)
Main windows -> TABLE -> DATA
In the Loop section, tick Internal table and fill in
ITAB1 (table in ABAP SMARTFORM calling function) INTO ITAB2
3. Define table in smartforms
Global settings :
Form interface
Variable name Type assignment Reference type
ITAB1 TYPE Table Structure
Global definitions
Variable name Type assignment Reference type
ITAB2 TYPE Table Structure
4. To display the data in the form
Make used of the Table Painter and declare the Line Type in Tabstrips Table
e.g. HD_GEN for printing header details,
IT_GEN for printing data details.
You have to specify the Line Type in your Text elements in the Tabstrips Output options.
Tick the New Line and specify the Line Type for outputting the data.
Declare your output fields in Text elements
Tabstrips - Output Options
For different fonts use this Style : IDWTCERTSTYLE
For Quantity or Amout you can used this variable &GS_ITAB-AMOUNT(12.2)&
5. Calling SMARTFORMS from your ABAP program
REPORT ZSMARTFORM.
Calling SMARTFORMS from your ABAP program.
Collecting all the table data in your program, and pass once to SMARTFORMS
SMARTFORMS
Declare your table type in :-
Global Settings -> Form Interface
Global Definintions -> Global Data
Main Window -> Table -> DATA
Written by : SAP Hints and Tips on Configuration and ABAP/4 Programming
http://sapr3.tripod.com
TABLES: MKPF.
DATA: FM_NAME TYPE RS38L_FNAM.
DATA: BEGIN OF INT_MKPF OCCURS 0.
INCLUDE STRUCTURE MKPF.
DATA: END OF INT_MKPF.
SELECT-OPTIONS S_MBLNR FOR MKPF-MBLNR MEMORY ID 001.
SELECT * FROM MKPF WHERE MBLNR IN S_MBLNR.
MOVE-CORRESPONDING MKPF TO INT_MKPF.
APPEND INT_MKPF.
ENDSELECT.
At the end of your program.
Passing data to SMARTFORMS
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'ZSMARTFORM'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
if sy-subrc <> 0.
WRITE: / 'ERROR 1'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function FM_NAME
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
GS_MKPF = INT_MKPF
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Smartform
you can check this link here you can see the steps and you can do it the same by looking at it..
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
SMARTFORMS STEPS.
1. In Tcode se11 Create a structure(struct) same like the Internal table that you are going to use in your report.
2. Create Table type(t_struct) of stracture in se11.
3. In your program declare Internal table(Itab) type table of structure(struct).
4. Define work area(wa) like line of internal table.
5. Open Tcode Smartforms
6. In form Global setting , forminterface Import parameter define Internal table(Itab) like table type of stracture(t_struct).
7. In form Global setting , Global definitions , in Global data define Work area(wa) like type stracture(struct).
8. In form pages and window, create Page node by default Page1 is available.
9. In page node you can create numbers of secondary window. But in form there is only one Main window.
10. By right click on page you can create windows or Go to Edit, Node, Create.
11. After creating the window right click on window create table for displaying the data that you are passing through internal table.
12. In the table Data parameter, loop internal internal table (Itab) into work area(wa).
13. In table there are three areas Header, Main Area, Footer.
14. Right click on the Main area create table line by default line type1 is there select it.
15. Divide line into cells according to your need then for each cell create Text node.
16. In text node general attribute. Write down fields of your work area(wa) or write any thing you want to display.
17. Save form and activate it.
18. Then go to Environment, function module name, there you get the name of function module copy it.
19. In your program call the function module that you have copied from your form.
20. In your program in exporting parameter of function pass the internal table(itab).
SAP Smart Forms is introduced in SAP Basis Release 4.6C as the tool for creating and maintaining forms.
SAP Smart Forms allow you to execute simple modifications to the form and in the form logic by using simple graphical tools; in 90% of all cases, this won't include any programming effort. Thus, a power user without any programming knowledge can
configure forms with data from an SAP System for the relevant business processes.
To print a form, you need a program for data retrieval and a Smart Form that contains the entire from logic. As data retrieval and form logic are separated, you must only adapt the Smart Form if changes to the form logic are necessary. The application program passes the data via a function module interface to the Smart Form. When activating the Smart Form, the system automatically generates a function module. At runtime, the system processes this function module.
You can insert static and dynamic tables. This includes line feeds in individual table cells, triggering events for table headings and subtotals, and sorting data before output.
You can check individual nodes as well as the entire form and find any existing errors in the tree structure. The data flow analysis checks whether all fields (variables) have a defined value at the moment they are displayed.
SAP Smart Forms allow you to include graphics, which you can display either as part of the form or as background graphics. You use background graphics to copy the layout of an existing (scanned) form or to lend forms a company-specific look. During printout, you can suppress the background graphic, if desired.
SAP Smart Forms also support postage optimizing.
Also read SAP Note No. 168368 - Smart Forms: New form tool in Release 4.6C
What Transaction to start SAP Smart Forms?
Execute transaction SMARTFORMS to start SAP Smart Forms.
Key Benefits of SAP Smart Forms:
SAP Smart Forms allows you to reduce considerably the implementation costs of mySAP.com solutions since forms can be adjusted in minimum time.
You design a form using the graphical Form Painter and the graphical Table Painter. The form logic is represented by a hierarchy structure (tree structure) that consists of individual nodes, such as nodes for global settings, nodes for texts, nodes for output tables, or nodes for graphics.
To make changes, use Drag & Drop, Copy & Paste, and select different attributes.
These actions do not include writing of coding lines or using a Script language.
Using your form description maintained in the Form Builder, Smart Forms generates a function module that encapsulates layout, content and form logic. So you do not need a group of function modules to print a form, but only one.
For Web publishing, the system provides a generated XML output of the processed form.
Smart Forms provides a data stream called XML for Smart Forms (XSF) to allow the use of 3rd party printing tools. XSF passes form content from R/3 to an external product without passing any layout information about the Smart Form.
SmartForms System Fields
Within a form you can use the field string SFSY with its system fields. During form processing the system replaces these fields with the corresponding values. The field values come from the SAP System or are results of the processing.
System fields of Smart Forms
&SFSY-DATE&
Displays the date. You determine the display format in the user master record.
&SFSY-TIME&
Displays the time of day in the form HH:MM:SS.
&SFSY-PAGE&
Inserts the number of the current print page into the text. You determine the format of the page number (for example, Arabic, numeric) in the page node.
&SFSY-FORMPAGES&
Displays the total number of pages for the currently processed form. This allows you to include texts such as'Page x of y' into your output.
&SFSY-JOBPAGES&
Contains the total page number of all forms in the currently processed print request.
&SFSY-WINDOWNAME&
Contains the name of the current window (string in the Window field)
&SFSY-PAGENAME&
Contains the name of the current page (string in the Page field)
&SFSY-PAGEBREAK&
Is set to 'X' after a page break (either automatic [Page 7] or command-controlled [Page 46])
&SFSY-MAINEND&
Is set as soon as processing of the main window on the current page ends
&SFSY-EXCEPTION&
Contains the name of the raised exception. You must trigger your own exceptions, which you defined in the form interface, using the user_exception macro (syntax: user_exception <exception name >).
Example Forms Available in Standard SAP R/3
SF_EXAMPLE_01
Simple example; invoice with table output of flight booking for one customer
SF_EXAMPLE_02
Similar to SF_EXAMPLE_01 but with subtotals
SF_EXAMPLE_03
Similar to SF_EXAMPLE_02, whereby several customers are selected in the application program; the form is called for each customer and all form outputs are included in an output request
Advantages of SAP Smart Forms
SAP Smart Forms have the following advantages:
1. The adaption of forms is supported to a large extent by graphic tools for layout and logic, so that no programming knowledge is necessary (at least 90% of all adjustments). Therefore, power user forms can also make configurations for your business processes with data from an SAP system. Consultants are only required in special cases.
2. Displaying table structures (dynamic framing of texts)
3. Output of background graphics, for form design in particular the use of templates which were scanned.
4. Colored output of texts
5. User-friendly and integrated Form Painter for the graphical design of forms
6. Graphical Table Painter for drawing tables
7. Reusing Font and paragraph formats in forms (Smart Styles)
8. Data interface in XML format (XML for Smart Forms, in short XSF)
9. Form translation is supported by standard translation tools
10. Flexible reuse of text modules
11. HTML output of forms (Basis release 6.10)
12. Interactive Web forms with input fields, pushbuttons, radio buttons, etc. (Basis-Release 6.10) -
Please Help me with this Logic.....
Seniors , Please Help me with this Requirment
BUKRS _____________________
GJAHR ____________________
LIFNR _____________________
MONAT _____________________
LIFNR NAME1 GSBER GJAHR HBAL SBAL ACCUMBAL
1001 ABB BUSS1 2005 300 00
ABB BUSS1 2005 00 100
300 100 (300-100)=200
ABB BUSS1 2006 200 00
ABB BUSS1 2006 200 00
400 00 (400-00)+ 200 =
600
ABB BUSS2 2005 300 00
ABB BUSS2 2005 00 100
300 100 ( 300-100) =200
ABB BUSS2 2006 400 00
ABB BUSS2 2006 00 100
400 100 (400-100)+200 =
500 ****************************************************************************
1400 300 (1400-300) **********************************************************************************************************
Same for the Next Vendor also...
This is the report for this Requirment i am working on....Please Help me in the Logic..How to Go on with it....
*& Report ZVENDOR_RECONCILLATION
REPORT ZVENDOR_RECONCILLATION.
TABLES : BSAK , BSIK , LFC1 , LFC3 , LFA1.
*ALV
TYPE-POOLS: SLIS.
*TYPE-POOLS icon.
DATA: It_SORT TYPE SLIS_T_SORTINFO_ALV ."WITH HEADER LINE.
DATA: TOP TYPE slis_t_listheader,
END TYPE slis_t_listheader,
EVENTS TYPE slis_t_event.
DATA : T_KEY TYPE SLIS_KEYINFO_ALV.
DATA : FIELDCAT TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE,
LAYOUT TYPE SLIS_LAYOUT_ALV OCCURS 1 WITH HEADER LINE ,
LCAT TYPE SLIS_FIELDCAT_ALV.
*INTERNAL TABLE
DATA: BEGIN OF sd_bsak,
bukrs TYPE bsak-bukrs,
lifnr TYPE bsak-lifnr,
umsks TYPE bsak-umsks,
umskz TYPE bsak-umskz,
augdt TYPE bsak-augdt,
augbl TYPE bsak-augbl,
zuonr TYPE bsak-zuonr,
gjahr TYPE bsak-gjahr,
belnr TYPE bsak-belnr,
buzei TYPE bsak-buzei,
budat TYPE bsak-budat,
bldat TYPE bsak-bldat,
xblnr TYPE bsak-xblnr,
blart TYPE bsak-blart,
monat TYPE bsak-monat,
bschl TYPE bsak-bschl,
zumsk TYPE bsak-zumsk,
shkzg TYPE bsak-shkzg,
gsber TYPE bsak-gsber,
dmbtr TYPE bsak-dmbtr,
wrbtr TYPE bsak-wrbtr,
sgtxt TYPE bsak-sgtxt,
saknr TYPE bsak-saknr,
hkont TYPE bsak-hkont,
END OF sd_bsak.
DATA: BEGIN OF sd_bsik,
bukrs TYPE bsik-bukrs,
lifnr TYPE bsik-lifnr,
umsks TYPE bsik-umsks,
umskz TYPE bsik-umskz,
augdt TYPE bsik-augdt,
augbl TYPE bsik-augbl,
zuonr TYPE bsik-zuonr,
gjahr TYPE bsik-gjahr,
belnr TYPE bsik-belnr,
buzei TYPE bsik-buzei,
budat TYPE bsik-budat,
bldat TYPE bsik-bldat,
xblnr TYPE bsik-xblnr,
blart TYPE bsik-blart,
monat TYPE bsik-monat,
bschl TYPE bsik-bschl,
zumsk TYPE bsik-zumsk,
shkzg TYPE bsik-shkzg,
gsber TYPE bsik-gsber,
dmbtr TYPE bsik-dmbtr,
wrbtr TYPE bsik-wrbtr,
sgtxt TYPE bsik-sgtxt,
saknr TYPE bsik-saknr,
hkont TYPE bsik-hkont,
zlsch TYPE bsik-zlsch,
END OF sd_bsik.
DATA: BEGIN OF it_lfa1,
lifnr TYPE lfa1-lifnr,
name1 TYPE lfa1-name1,
END OF it_lfa1.
*FINAL INTERNAL TABLE DECLARATION
DATA: BEGIN OF IT_FINAL,
lifnr TYPE bsak-lifnr,
gsber TYPE bsak-gsber,
bukrs TYPE bsak-bukrs,
umsks TYPE bsak-umsks,
umskz TYPE bsak-umskz,
augdt TYPE bsak-augdt,
augbl TYPE bsak-augbl,
zuonr TYPE bsak-zuonr,
gjahr TYPE bsak-gjahr,
belnr TYPE bsak-belnr,
buzei TYPE bsak-buzei,
budat TYPE bsak-budat,
bldat TYPE bsak-bldat,
xblnr TYPE bsak-xblnr,
blart TYPE bsak-blart,
monat TYPE bsak-monat,
bschl TYPE bsak-bschl,
zumsk TYPE bsak-zumsk,
shkzg TYPE bsak-shkzg,
gsber TYPE bsak-gsber,
dmbtr TYPE bsak-dmbtr,
wrbtr TYPE bsak-wrbtr,
sgtxt TYPE bsak-sgtxt,
saknr TYPE bsak-saknr,
hkont TYPE bsak-hkont,
DMBTR_S TYPE BSAK-DMBTR,
DMBTR_H TYPE BSAK-DMBTR,
DS TYPE P DECIMALS 2,
DH TYPE P DECIMALS 2,
SUB TYPE P DECIMALS 2,
ADD TYPE P DECIMALS 2,
BAL TYPE P DECIMALS 2,
lifnr TYPE bsik-lifnr,
umsks TYPE bsik-umsks,
umskz TYPE bsik-umskz,
augdt TYPE bsik-augdt,
augbl TYPE bsik-augbl,
zuonr TYPE bsik-zuonr,
gjahr TYPE bsik-gjahr,
belnr TYPE bsik-belnr,
buzei TYPE bsik-buzei,
budat TYPE bsik-budat,
bldat TYPE bsik-bldat,
xblnr TYPE bsik-xblnr,
blart TYPE bsik-blart,
monat TYPE bsik-monat,
bschl TYPE bsik-bschl,
zumsk TYPE bsik-zumsk,
shkzg TYPE bsik-shkzg,
gsber TYPE bsik-gsber,
dmbtr TYPE bsik-dmbtr,
wrbtr TYPE bsik-wrbtr,
sgtxt TYPE bsik-sgtxt,
saknr TYPE bsik-saknr,
hkont TYPE bsik-hkont,
zlsch TYPE bsik-zlsch,
lifnr TYPE lfa1-lifnr,
name1 TYPE lfa1-name1,
END OF IT_FINAL.
DATA: BEGIN OF SD_FINAL,
gsber TYPE bsak-gsber,
lifnr TYPE bsak-lifnr,
bukrs TYPE bsak-bukrs,
lifnr TYPE bsak-lifnr,
umsks TYPE bsak-umsks,
umskz TYPE bsak-umskz,
augdt TYPE bsak-augdt,
augbl TYPE bsak-augbl,
zuonr TYPE bsak-zuonr,
gjahr TYPE bsak-gjahr,
belnr TYPE bsak-belnr,
buzei TYPE bsak-buzei,
budat TYPE bsak-budat,
bldat TYPE bsak-bldat,
xblnr TYPE bsak-xblnr,
blart TYPE bsak-blart,
monat TYPE bsak-monat,
bschl TYPE bsak-bschl,
zumsk TYPE bsak-zumsk,
shkzg TYPE bsak-shkzg,
dmbtr TYPE bsak-dmbtr,
wrbtr TYPE bsak-wrbtr,
sgtxt TYPE bsak-sgtxt,
saknr TYPE bsak-saknr,
hkont TYPE bsak-hkont,
bukrs TYPE bsik-bukrs,
lifnr TYPE bsik-lifnr,
umsks TYPE bsik-umsks,
umskz TYPE bsik-umskz,
augdt TYPE bsik-augdt,
augbl TYPE bsik-augbl,
zuonr TYPE bsik-zuonr,
gjahr TYPE bsik-gjahr,
belnr TYPE bsik-belnr,
buzei TYPE bsik-buzei,
budat TYPE bsik-budat,
bldat TYPE bsik-bldat,
xblnr TYPE bsik-xblnr,
blart TYPE bsik-blart,
monat TYPE bsik-monat,
bschl TYPE bsik-bschl,
zumsk TYPE bsik-zumsk,
shkzg TYPE bsik-shkzg,
gsber TYPE bsik-gsber,
dmbtr TYPE bsik-dmbtr,
wrbtr TYPE bsik-wrbtr,
sgtxt TYPE bsik-sgtxt,
saknr TYPE bsik-saknr,
hkont TYPE bsik-hkont,
zlsch TYPE bsik-zlsch,
lifnr TYPE lfa1-lifnr,
name1 TYPE lfa1-name1,
line_color(4) TYPE c,
END OF SD_FINAL.
DATA IT_STD_BSAK LIKE TABLE OF SD_BSAK WITH HEADER LINE.
DATA IT_STD_BSIK LIKE TABLE OF SD_BSIK WITH HEADER LINE.
DATA IT_STD_LFA1 LIKE TABLE OF IT_LFA1 WITH HEADER LINE.
DATA IT_STD_FINAL LIKE TABLE OF IT_FINAL WITH HEADER LINE.
DATA IT_FINAL_DISPLAY LIKE TABLE OF SD_FINAL WITH HEADER LINE.
*SELECTION-SCREEN
SELECTION-SCREEN BEGIN OF BLOCK HEADER WITH FRAME TITLE TEXT-001.
PARAMETERS: P_BUKRS LIKE BSAK-BUKRS OBLIGATORY.
SELECT-OPTIONS : S_GJAHR FOR BSAK-GJAHR.
SELECT-OPTIONS: S_LIFNR FOR BSAK-LIFNR.
SELECT-OPTIONS: S_MONAT FOR BSAK-MONAT.
SELECTION-SCREEN END OF BLOCK HEADER.
START-OF-SELECTION.
SET PF-STATUS 'STATUS'.
PERFORM DATA_RETRIVAL.
PERFORM FIELD.
PERFORM EVENTS USING EVENTS.
PERFORM EVENTS_1 USING EVENTS.
PERFORM HEADER USING TOP.
PERFORM LAYOUT.
PERFORM DISPLAY.
END-OF-PAGE.
*& Form DATA_RETRIVAL
text
--> p1 text
<-- p2 text
FORM DATA_RETRIVAL .
SELECT BUKRS LIFNR UMSKS UMSKZ AUGDT AUGBL ZUONR GJAHR BELNR BUZEI BUDAT BLDAT XBLNR BLART
MONAT BSCHL ZUMSK SHKZG GSBER DMBTR WRBTR SGTXT SAKNR HKONT
FROM BSAK INTO TABLE IT_STD_BSAK
WHERE BUKRS = P_BUKRS
AND GJAHR IN S_GJAHR
AND LIFNR IN S_LIFNR
AND MONAT IN S_MONAT.
IF NOT IT_STD_BSAK[] IS INITIAL.
SELECT BUKRS LIFNR UMSKS UMSKZ AUGDT AUGBL ZUONR GJAHR BELNR BUZEI BUDAT BLDAT XBLNR
BLART MONAT BSCHL ZUMSK SHKZG GSBER DMBTR WRBTR SGTXT SAKNR HKONT ZLSCH
FROM BSIK INTO TABLE IT_STD_BSIK FOR ALL ENTRIES IN IT_STD_BSAK
WHERE BUKRS = IT_STD_BSAK-BUKRS AND LIFNR = IT_STD_BSAK-LIFNR AND GJAHR = IT_STD_BSAK-GJAHR .
ENDIF.
IF NOT IT_STD_BSAK[] IS INITIAL.
SELECT LIFNR NAME1
FROM LFA1 INTO TABLE IT_STD_LFA1 FOR ALL ENTRIES IN IT_STD_BSAK
WHERE LIFNR = IT_STD_BSAK-LIFNR.
ENDIF.
LOOP AT IT_STD_BSAK.
IT_STD_FINAL-BUKRS = IT_STD_BSAK-BUKRS.
IT_STD_FINAL-LIFNR = IT_STD_BSAK-LIFNR.
IT_STD_FINAL-UMSKS = IT_STD_BSAK-UMSKS.
IT_STD_FINAL-UMSKZ = IT_STD_BSAK-UMSKZ.
IT_STD_FINAL-AUGDT = IT_STD_BSAK-AUGDT.
IT_STD_FINAL-AUGBL = IT_STD_BSAK-AUGBL.
IT_STD_FINAL-ZUONR = IT_STD_BSAK-ZUONR.
IT_STD_FINAL-GJAHR = IT_STD_BSAK-GJAHR.
IT_STD_FINAL-BELNR = IT_STD_BSAK-BELNR.
IT_STD_FINAL-BUZEI = IT_STD_BSAK-BUZEI.
IT_STD_FINAL-BUDAT = IT_STD_BSAK-BUDAT.
IT_STD_FINAL-BLDAT = IT_STD_BSAK-BLDAT.
IT_STD_FINAL-XBLNR = IT_STD_BSAK-XBLNR.
IT_STD_FINAL-BLART = IT_STD_BSAK-BLART.
IT_STD_FINAL-MONAT = IT_STD_BSAK-MONAT.
IT_STD_FINAL-BSCHL = IT_STD_BSAK-BSCHL.
IT_STD_FINAL-ZUMSK = IT_STD_BSAK-ZUMSK.
IT_STD_FINAL-SHKZG = IT_STD_BSAK-SHKZG.
IT_STD_FINAL-GSBER = IT_STD_BSAK-GSBER.
IT_STD_FINAL-DMBTR = IT_STD_BSAK-DMBTR.
IT_STD_FINAL-WRBTR = IT_STD_BSAK-WRBTR.
IT_STD_FINAL-SGTXT = IT_STD_BSAK-SGTXT.
IT_STD_FINAL-SAKNR = IT_STD_BSAK-SAKNR.
IT_STD_FINAL-HKONT = IT_STD_BSAK-HKONT.
READ TABLE IT_STD_LFA1 WITH KEY LIFNR = IT_STD_FINAL-LIFNR.
IF SY-SUBRC = 0.
IT_STD_FINAL-NAME1 = IT_STD_LFA1-NAME1.
ENDIF.
APPEND IT_STD_FINAL.
CLEAR IT_STD_FINAL.
ENDLOOP.
LOOP AT IT_STD_BSIK.
IF SY-SUBRC = 0.
IT_STD_FINAL-BUKRS = IT_STD_BSIK-BUKRS.
IT_STD_FINAL-LIFNR = IT_STD_BSIK-LIFNR.
IT_STD_FINAL-UMSKS = IT_STD_BSIK-UMSKS.
IT_STD_FINAL-UMSKZ = IT_STD_BSIK-UMSKZ.
IT_STD_FINAL-AUGDT = IT_STD_BSIK-AUGDT.
IT_STD_FINAL-AUGBL = IT_STD_BSIK-AUGBL.
IT_STD_FINAL-ZUONR = IT_STD_BSIK-ZUONR.
IT_STD_FINAL-GJAHR = IT_STD_BSIK-GJAHR.
IT_STD_FINAL-BELNR = IT_STD_BSIK-BELNR.
IT_STD_FINAL-BUZEI = IT_STD_BSIK-BUZEI.
IT_STD_FINAL-BUDAT = IT_STD_BSIK-BUDAT.
IT_STD_FINAL-BLDAT = IT_STD_BSIK-BLDAT.
IT_STD_FINAL-XBLNR = IT_STD_BSIK-XBLNR.
IT_STD_FINAL-BLART = IT_STD_BSIK-BLART.
IT_STD_FINAL-MONAT = IT_STD_BSIK-MONAT.
IT_STD_FINAL-BSCHL = IT_STD_BSIK-BSCHL.
IT_STD_FINAL-ZUMSK = IT_STD_BSIK-ZUMSK.
IT_STD_FINAL-SHKZG = IT_STD_BSIK-SHKZG.
IT_STD_FINAL-GSBER = IT_STD_BSIK-GSBER.
IT_STD_FINAL-DMBTR = IT_STD_BSIK-DMBTR.
IT_STD_FINAL-WRBTR = IT_STD_BSIK-WRBTR.
IT_STD_FINAL-SGTXT = IT_STD_BSIK-SGTXT.
IT_STD_FINAL-SAKNR = IT_STD_BSIK-SAKNR.
IT_STD_FINAL-HKONT = IT_STD_BSIK-HKONT.
IT_STD_FINAL-ZLSCH = IT_STD_BSIK-ZLSCH.
ENDIF.
APPEND IT_STD_FINAL.
CLEAR IT_STD_FINAL.
ENDLOOP.
LOOP AT IT_STD_FINAL.
IF IT_STD_FINAL-SHKZG = 'S'.
IT_STD_FINAL-DMBTR_S = IT_STD_FINAL-DMBTR.
ELSE.
IF IT_STD_FINAL-SHKZG = 'H'.
IT_STD_FINAL-DMBTR_H = IT_STD_FINAL-DMBTR.
ENDIF.
ENDIF.
IT_STD_FINAL-DMBTR = ''.
MODIFY IT_STD_FINAL INDEX SY-TABIX TRANSPORTING DMBTR_H DMBTR_S DMBTR.
"VAR.
CLEAR IT_STD_FINAL.
ENDLOOP.
SORT IT_STD_FINAL BY LIFNR GSBER GJAHR.
ENDFORM. " DATA_RETRIVAL
*& Form FIELD
text
--> p1 text
<-- p2 text
form FIELD .
LCAT-FIELDNAME = 'LIFNR'.
LCAT-TABNAME = 'IT_STD_FINAL'.
LCAT-SELTEXT_L = 'Vendor No'.
LCAT-JUST = 'M'.
APPEND LCAT TO FIELDCAT.
CLEAR LCAT.
LCAT-FIELDNAME = 'NAME1'.
LCAT-TABNAME = 'IT_STD_FINAL'.
LCAT-SELTEXT_L = 'Vendor Name'.
LCAT-JUST = 'M'.
APPEND LCAT TO FIELDCAT.
CLEAR LCAT.
LCAT-FIELDNAME = 'GJAHR'.
LCAT-TABNAME = 'IT_STD_FINAL'.
LCAT-SELTEXT_L = 'Fiscal Year'.
LCAT-JUST = 'M'.
APPEND LCAT TO FIELDCAT.
CLEAR LCAT.
LCAT-FIELDNAME = 'GSBER'.
LCAT-TABNAME = 'IT_STD_FINAL'.
LCAT-SELTEXT_L = 'BussArea'.
LCAT-JUST = 'M'.
APPEND LCAT TO FIELDCAT.
CLEAR LCAT.
LCAT-FIELDNAME = 'DMBTR_S'.
LCAT-TABNAME = 'IT_STD_FINAL'.
LCAT-SELTEXT_L = 'Debit Balanace'.
LCAT-JUST = 'M'.
APPEND LCAT TO FIELDCAT.
CLEAR LCAT.
LCAT-FIELDNAME = 'DMBTR_H'.
LCAT-TABNAME = 'IT_STD_FINAL'.
LCAT-SELTEXT_L = 'Credit Balance'.
LCAT-JUST = 'M'.
APPEND LCAT TO FIELDCAT.
CLEAR LCAT.
LCAT-FIELDNAME = 'BAL'.
LCAT-TABNAME = 'IT_STD_FINAL'.
LCAT-SELTEXT_L = 'Accumulated Balance'.
LCAT-JUST = 'M'.
APPEND LCAT TO FIELDCAT.
CLEAR LCAT.
endform. " FIELD
*& Form DISPLAY
text
--> p1 text
<-- p2 text
form DISPLAY .
CLEAR: IT_STD_BSAK,IT_STD_BSIK, IT_STD_LFA1 .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_PF_STATUS_SET = 'STATUS '
I_CALLBACK_USER_COMMAND = ' '
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT = LAYOUT
IT_FIELDCAT = FIELDCAT[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT = IT_SORT
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS = EVENTS
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_HTML_HEIGHT_TOP = 0
I_HTML_HEIGHT_END = 0
IT_ALV_GRAPHICS =
IT_HYPERLINK =
IT_ADD_FIELDCAT =
IT_EXCEPT_QINFO =
IR_SALV_FULLSCREEN_ADAPTER =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = IT_CHARG
t_outtab = IT_STD_FINAL[]
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "DISPLAY
*& Form EVENTS
text
--> p1 text
<-- p2 text
form EVENTS USING P_EVENTS TYPE slis_t_event.
DATA: ls_event TYPE slis_alv_event.
ls_event-name = 'TOP_OF_PAGE'.
ls_event-form = 'TOP_OF_PAGE'.
APPEND ls_event TO P_EVENTS.
endform. " EVENTS
*& Form TOP_OF_PAGE
text
FORM TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = TOP.
ENDFORM. "TOP_OF_PAGE
*& Form LAYOUT
text
--> p1 text
<-- p2 text
form LAYOUT .
LAYOUT-ZEBRA = 'X'.
LAYOUT-INFO_FIELDNAME = 'LINE_COLOR'.
LAYOUT-COLWIDTH_OPTIMIZE = 'X'.
APPEND LAYOUT." TO LAYOUT.
endform. " LAYOUT
*& Form EVENTS_1
text
-->P_EVENTS text
FORM EVENTS_1 USING P_EVENTS TYPE slis_t_event.
DATA: ls_event TYPE slis_alv_event.
WRITE: SY-UNAME.
ls_event-name = 'END_OF_PAGE'.
ls_event-form = 'END_OF_PAGE'.
APPEND ls_event TO P_EVENTS.
ENDFORM. " EVENTS_1Seniors , Please Help me with this Requirment
BUKRS _____________________
GJAHR ____________________
LIFNR _____________________
MONAT _____________________
LIFNR NAME1 GSBER GJAHR HBAL SBAL ACCUMBAL
1001 ABB BUSS1 2005 300 00
ABB BUSS1 2005 00 100
300 100 (300-100)=200
ABB BUSS1 2006 200 00
ABB BUSS1 2006 200 00
400 00 (400-00)+ 200 =
600
ABB BUSS2 2005 300 00
ABB BUSS2 2005 00 100
300 100 ( 300-100) =200
ABB BUSS2 2006 400 00
ABB BUSS2 2006 00 100
400 100 (400-100)+200 =
500 ****************************************************************************
1400 300 (1400-300) **********************************************************************************************************
Same for the Next Vendor also...
This is the report for this Requirment i am working on....Please Help me in the Logic..How to Go on with it....
*& Report ZVENDOR_RECONCILLATION
REPORT ZVENDOR_RECONCILLATION.
TABLES : BSAK , BSIK , LFC1 , LFC3 , LFA1.
*ALV
TYPE-POOLS: SLIS.
*TYPE-POOLS icon.
DATA: It_SORT TYPE SLIS_T_SORTINFO_ALV ."WITH HEADER LINE.
DATA: TOP TYPE slis_t_listheader,
END TYPE slis_t_listheader,
EVENTS TYPE slis_t_event.
DATA : T_KEY TYPE SLIS_KEYINFO_ALV.
DATA : FIELDCAT TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE,
LAYOUT TYPE SLIS_LAYOUT_ALV OCCURS 1 WITH HEADER LINE ,
LCAT TYPE SLIS_FIELDCAT_ALV.
*INTERNAL TABLE
DATA: BEGIN OF sd_bsak,
bukrs TYPE bsak-bukrs,
lifnr TYPE bsak-lifnr,
umsks TYPE bsak-umsks,
umskz TYPE bsak-umskz,
augdt TYPE bsak-augdt,
augbl TYPE bsak-augbl,
zuonr TYPE bsak-zuonr,
gjahr TYPE bsak-gjahr,
belnr TYPE bsak-belnr,
buzei TYPE bsak-buzei,
budat TYPE bsak-budat,
bldat TYPE bsak-bldat,
xblnr TYPE bsak-xblnr,
blart TYPE bsak-blart,
monat TYPE bsak-monat,
bschl TYPE bsak-bschl,
zumsk TYPE bsak-zumsk,
shkzg TYPE bsak-shkzg,
gsber TYPE bsak-gsber,
dmbtr TYPE bsak-dmbtr,
wrbtr TYPE bsak-wrbtr,
sgtxt TYPE bsak-sgtxt,
saknr TYPE bsak-saknr,
hkont TYPE bsak-hkont,
END OF sd_bsak.
DATA: BEGIN OF sd_bsik,
bukrs TYPE bsik-bukrs,
lifnr TYPE bsik-lifnr,
umsks TYPE bsik-umsks,
umskz TYPE bsik-umskz,
augdt TYPE bsik-augdt,
augbl TYPE bsik-augbl,
zuonr TYPE bsik-zuonr,
gjahr TYPE bsik-gjahr,
belnr TYPE bsik-belnr,
buzei TYPE bsik-buzei,
budat TYPE bsik-budat,
bldat TYPE bsik-bldat,
xblnr TYPE bsik-xblnr,
blart TYPE bsik-blart,
monat TYPE bsik-monat,
bschl TYPE bsik-bschl,
zumsk TYPE bsik-zumsk,
shkzg TYPE bsik-shkzg,
gsber TYPE bsik-gsber,
dmbtr TYPE bsik-dmbtr,
wrbtr TYPE bsik-wrbtr,
sgtxt TYPE bsik-sgtxt,
saknr TYPE bsik-saknr,
hkont TYPE bsik-hkont,
zlsch TYPE bsik-zlsch,
END OF sd_bsik.
DATA: BEGIN OF it_lfa1,
lifnr TYPE lfa1-lifnr,
name1 TYPE lfa1-name1,
END OF it_lfa1.
*FINAL INTERNAL TABLE DECLARATION
DATA: BEGIN OF IT_FINAL,
lifnr TYPE bsak-lifnr,
gsber TYPE bsak-gsber,
bukrs TYPE bsak-bukrs,
umsks TYPE bsak-umsks,
umskz TYPE bsak-umskz,
augdt TYPE bsak-augdt,
augbl TYPE bsak-augbl,
zuonr TYPE bsak-zuonr,
gjahr TYPE bsak-gjahr,
belnr TYPE bsak-belnr,
buzei TYPE bsak-buzei,
budat TYPE bsak-budat,
bldat TYPE bsak-bldat,
xblnr TYPE bsak-xblnr,
blart TYPE bsak-blart,
monat TYPE bsak-monat,
bschl TYPE bsak-bschl,
zumsk TYPE bsak-zumsk,
shkzg TYPE bsak-shkzg,
gsber TYPE bsak-gsber,
dmbtr TYPE bsak-dmbtr,
wrbtr TYPE bsak-wrbtr,
sgtxt TYPE bsak-sgtxt,
saknr TYPE bsak-saknr,
hkont TYPE bsak-hkont,
DMBTR_S TYPE BSAK-DMBTR,
DMBTR_H TYPE BSAK-DMBTR,
DS TYPE P DECIMALS 2,
DH TYPE P DECIMALS 2,
SUB TYPE P DECIMALS 2,
ADD TYPE P DECIMALS 2,
BAL TYPE P DECIMALS 2,
lifnr TYPE bsik-lifnr,
umsks TYPE bsik-umsks,
umskz TYPE bsik-umskz,
augdt TYPE bsik-augdt,
augbl TYPE bsik-augbl,
zuonr TYPE bsik-zuonr,
gjahr TYPE bsik-gjahr,
belnr TYPE bsik-belnr,
buzei TYPE bsik-buzei,
budat TYPE bsik-budat,
bldat TYPE bsik-bldat,
xblnr TYPE bsik-xblnr,
blart TYPE bsik-blart,
monat TYPE bsik-monat,
bschl TYPE bsik-bschl,
zumsk TYPE bsik-zumsk,
shkzg TYPE bsik-shkzg,
gsber TYPE bsik-gsber,
dmbtr TYPE bsik-dmbtr,
wrbtr TYPE bsik-wrbtr,
sgtxt TYPE bsik-sgtxt,
saknr TYPE bsik-saknr,
hkont TYPE bsik-hkont,
zlsch TYPE bsik-zlsch,
lifnr TYPE lfa1-lifnr,
name1 TYPE lfa1-name1,
END OF IT_FINAL.
DATA: BEGIN OF SD_FINAL,
gsber TYPE bsak-gsber,
lifnr TYPE bsak-lifnr,
bukrs TYPE bsak-bukrs,
lifnr TYPE bsak-lifnr,
umsks TYPE bsak-umsks,
umskz TYPE bsak-umskz,
augdt TYPE bsak-augdt,
augbl TYPE bsak-augbl,
zuonr TYPE bsak-zuonr,
gjahr TYPE bsak-gjahr,
belnr TYPE bsak-belnr,
buzei TYPE bsak-buzei,
budat TYPE bsak-budat,
bldat TYPE bsak-bldat,
xblnr TYPE bsak-xblnr,
blart TYPE bsak-blart,
monat TYPE bsak-monat,
bschl TYPE bsak-bschl,
zumsk TYPE bsak-zumsk,
shkzg TYPE bsak-shkzg,
dmbtr TYPE bsak-dmbtr,
wrbtr TYPE bsak-wrbtr,
sgtxt TYPE bsak-sgtxt,
saknr TYPE bsak-saknr,
hkont TYPE bsak-hkont,
bukrs TYPE bsik-bukrs,
lifnr TYPE bsik-lifnr,
umsks TYPE bsik-umsks,
umskz TYPE bsik-umskz,
augdt TYPE bsik-augdt,
augbl TYPE bsik-augbl,
zuonr TYPE bsik-zuonr,
gjahr TYPE bsik-gjahr,
belnr TYPE bsik-belnr,
buzei TYPE bsik-buzei,
budat TYPE bsik-budat,
bldat TYPE bsik-bldat,
xblnr TYPE bsik-xblnr,
blart TYPE bsik-blart,
monat TYPE bsik-monat,
bschl TYPE bsik-bschl,
zumsk TYPE bsik-zumsk,
shkzg TYPE bsik-shkzg,
gsber TYPE bsik-gsber,
dmbtr TYPE bsik-dmbtr,
wrbtr TYPE bsik-wrbtr,
sgtxt TYPE bsik-sgtxt,
saknr TYPE bsik-saknr,
hkont TYPE bsik-hkont,
zlsch TYPE bsik-zlsch,
lifnr TYPE lfa1-lifnr,
name1 TYPE lfa1-name1,
line_color(4) TYPE c,
END OF SD_FINAL.
DATA IT_STD_BSAK LIKE TABLE OF SD_BSAK WITH HEADER LINE.
DATA IT_STD_BSIK LIKE TABLE OF SD_BSIK WITH HEADER LINE.
DATA IT_STD_LFA1 LIKE TABLE OF IT_LFA1 WITH HEADER LINE.
DATA IT_STD_FINAL LIKE TABLE OF IT_FINAL WITH HEADER LINE.
DATA IT_FINAL_DISPLAY LIKE TABLE OF SD_FINAL WITH HEADER LINE.
*SELECTION-SCREEN
SELECTION-SCREEN BEGIN OF BLOCK HEADER WITH FRAME TITLE TEXT-001.
PARAMETERS: P_BUKRS LIKE BSAK-BUKRS OBLIGATORY.
SELECT-OPTIONS : S_GJAHR FOR BSAK-GJAHR.
SELECT-OPTIONS: S_LIFNR FOR BSAK-LIFNR.
SELECT-OPTIONS: S_MONAT FOR BSAK-MONAT.
SELECTION-SCREEN END OF BLOCK HEADER.
START-OF-SELECTION.
SET PF-STATUS 'STATUS'.
PERFORM DATA_RETRIVAL.
PERFORM FIELD.
PERFORM EVENTS USING EVENTS.
PERFORM EVENTS_1 USING EVENTS.
PERFORM HEADER USING TOP.
PERFORM LAYOUT.
PERFORM DISPLAY.
END-OF-PAGE.
*& Form DATA_RETRIVAL
text
--> p1 text
<-- p2 text
FORM DATA_RETRIVAL .
SELECT BUKRS LIFNR UMSKS UMSKZ AUGDT AUGBL ZUONR GJAHR BELNR BUZEI BUDAT BLDAT XBLNR BLART
MONAT BSCHL ZUMSK SHKZG GSBER DMBTR WRBTR SGTXT SAKNR HKONT
FROM BSAK INTO TABLE IT_STD_BSAK
WHERE BUKRS = P_BUKRS
AND GJAHR IN S_GJAHR
AND LIFNR IN S_LIFNR
AND MONAT IN S_MONAT.
IF NOT IT_STD_BSAK[] IS INITIAL.
SELECT BUKRS LIFNR UMSKS UMSKZ AUGDT AUGBL ZUONR GJAHR BELNR BUZEI BUDAT BLDAT XBLNR
BLART MONAT BSCHL ZUMSK SHKZG GSBER DMBTR WRBTR SGTXT SAKNR HKONT ZLSCH
FROM BSIK INTO TABLE IT_STD_BSIK FOR ALL ENTRIES IN IT_STD_BSAK
WHERE BUKRS = IT_STD_BSAK-BUKRS AND LIFNR = IT_STD_BSAK-LIFNR AND GJAHR = IT_STD_BSAK-GJAHR .
ENDIF.
IF NOT IT_STD_BSAK[] IS INITIAL.
SELECT LIFNR NAME1
FROM LFA1 INTO TABLE IT_STD_LFA1 FOR ALL ENTRIES IN IT_STD_BSAK
WHERE LIFNR = IT_STD_BSAK-LIFNR.
ENDIF.
LOOP AT IT_STD_BSAK.
IT_STD_FINAL-BUKRS = IT_STD_BSAK-BUKRS.
IT_STD_FINAL-LIFNR = IT_STD_BSAK-LIFNR.
IT_STD_FINAL-UMSKS = IT_STD_BSAK-UMSKS.
IT_STD_FINAL-UMSKZ = IT_STD_BSAK-UMSKZ.
IT_STD_FINAL-AUGDT = IT_STD_BSAK-AUGDT.
IT_STD_FINAL-AUGBL = IT_STD_BSAK-AUGBL.
IT_STD_FINAL-ZUONR = IT_STD_BSAK-ZUONR.
IT_STD_FINAL-GJAHR = IT_STD_BSAK-GJAHR.
IT_STD_FINAL-BELNR = IT_STD_BSAK-BELNR.
IT_STD_FINAL-BUZEI = IT_STD_BSAK-BUZEI.
IT_STD_FINAL-BUDAT = IT_STD_BSAK-BUDAT.
IT_STD_FINAL-BLDAT = IT_STD_BSAK-BLDAT.
IT_STD_FINAL-XBLNR = IT_STD_BSAK-XBLNR.
IT_STD_FINAL-BLART = IT_STD_BSAK-BLART.
IT_STD_FINAL-MONAT = IT_STD_BSAK-MONAT.
IT_STD_FINAL-BSCHL = IT_STD_BSAK-BSCHL.
IT_STD_FINAL-ZUMSK = IT_STD_BSAK-ZUMSK.
IT_STD_FINAL-SHKZG = IT_STD_BSAK-SHKZG.
IT_STD_FINAL-GSBER = IT_STD_BSAK-GSBER.
IT_STD_FINAL-DMBTR = IT_STD_BSAK-DMBTR.
IT_STD_FINAL-WRBTR = IT_STD_BSAK-WRBTR.
IT_STD_FINAL-SGTXT = IT_STD_BSAK-SGTXT.
IT_STD_FINAL-SAKNR = IT_STD_BSAK-SAKNR.
IT_STD_FINAL-HKONT = IT_STD_BSAK-HKONT.
READ TABLE IT_STD_LFA1 WITH KEY LIFNR = IT_STD_FINAL-LIFNR.
IF SY-SUBRC = 0.
IT_STD_FINAL-NAME1 = IT_STD_LFA1-NAME1.
ENDIF.
APPEND IT_STD_FINAL.
CLEAR IT_STD_FINAL.
ENDLOOP.
LOOP AT IT_STD_BSIK.
IF SY-SUBRC = 0.
IT_STD_FINAL-BUKRS = IT_STD_BSIK-BUKRS.
IT_STD_FINAL-LIFNR = IT_STD_BSIK-LIFNR.
IT_STD_FINAL-UMSKS = IT_STD_BSIK-UMSKS.
IT_STD_FINAL-UMSKZ = IT_STD_BSIK-UMSKZ.
IT_STD_FINAL-AUGDT = IT_STD_BSIK-AUGDT.
IT_STD_FINAL-AUGBL = IT_STD_BSIK-AUGBL.
IT_STD_FINAL-ZUONR = IT_STD_BSIK-ZUONR.
IT_STD_FINAL-GJAHR = IT_STD_BSIK-GJAHR.
IT_STD_FINAL-BELNR = IT_STD_BSIK-BELNR.
IT_STD_FINAL-BUZEI = IT_STD_BSIK-BUZEI.
IT_STD_FINAL-BUDAT = IT_STD_BSIK-BUDAT.
IT_STD_FINAL-BLDAT = IT_STD_BSIK-BLDAT.
IT_STD_FINAL-XBLNR = IT_STD_BSIK-XBLNR.
IT_STD_FINAL-BLART = IT_STD_BSIK-BLART.
IT_STD_FINAL-MONAT = IT_STD_BSIK-MONAT.
IT_STD_FINAL-BSCHL = IT_STD_BSIK-BSCHL.
IT_STD_FINAL-ZUMSK = IT_STD_BSIK-ZUMSK.
IT_STD_FINAL-SHKZG = IT_STD_BSIK-SHKZG.
IT_STD_FINAL-GSBER = IT_STD_BSIK-GSBER.
IT_STD_FINAL-DMBTR = IT_STD_BSIK-DMBTR.
IT_STD_FINAL-WRBTR = IT_STD_BSIK-WRBTR.
IT_STD_FINAL-SGTXT = IT_STD_BSIK-SGTXT.
IT_STD_FINAL-SAKNR = IT_STD_BSIK-SAKNR.
IT_STD_FINAL-HKONT = IT_STD_BSIK-HKONT.
IT_STD_FINAL-ZLSCH = IT_STD_BSIK-ZLSCH.
ENDIF.
APPEND IT_STD_FINAL.
CLEAR IT_STD_FINAL.
ENDLOOP.
LOOP AT IT_STD_FINAL.
IF IT_STD_FINAL-SHKZG = 'S'.
IT_STD_FINAL-DMBTR_S = IT_STD_FINAL-DMBTR.
ELSE.
IF IT_STD_FINAL-SHKZG = 'H'.
IT_STD_FINAL-DMBTR_H = IT_STD_FINAL-DMBTR.
ENDIF.
ENDIF.
IT_STD_FINAL-DMBTR = ''.
MODIFY IT_STD_FINAL INDEX SY-TABIX TRANSPORTING DMBTR_H DMBTR_S DMBTR.
"VAR.
CLEAR IT_STD_FINAL.
ENDLOOP.
SORT IT_STD_FINAL BY LIFNR GSBER GJAHR.
ENDFORM. " DATA_RETRIVAL
*& Form FIELD
text
--> p1 text
<-- p2 text
form FIELD .
LCAT-FIELDNAME = 'LIFNR'.
LCAT-TABNAME = 'IT_STD_FINAL'.
LCAT-SELTEXT_L = 'Vendor No'.
LCAT-JUST = 'M'.
APPEND LCAT TO FIELDCAT.
CLEAR LCAT.
LCAT-FIELDNAME = 'NAME1'.
LCAT-TABNAME = 'IT_STD_FINAL'.
LCAT-SELTEXT_L = 'Vendor Name'.
LCAT-JUST = 'M'.
APPEND LCAT TO FIELDCAT.
CLEAR LCAT.
LCAT-FIELDNAME = 'GJAHR'.
LCAT-TABNAME = 'IT_STD_FINAL'.
LCAT-SELTEXT_L = 'Fiscal Year'.
LCAT-JUST = 'M'.
APPEND LCAT TO FIELDCAT.
CLEAR LCAT.
LCAT-FIELDNAME = 'GSBER'.
LCAT-TABNAME = 'IT_STD_FINAL'.
LCAT-SELTEXT_L = 'BussArea'.
LCAT-JUST = 'M'.
APPEND LCAT TO FIELDCAT.
CLEAR LCAT.
LCAT-FIELDNAME = 'DMBTR_S'.
LCAT-TABNAME = 'IT_STD_FINAL'.
LCAT-SELTEXT_L = 'Debit Balanace'.
LCAT-JUST = 'M'.
APPEND LCAT TO FIELDCAT.
CLEAR LCAT.
LCAT-FIELDNAME = 'DMBTR_H'.
LCAT-TABNAME = 'IT_STD_FINAL'.
LCAT-SELTEXT_L = 'Credit Balance'.
LCAT-JUST = 'M'.
APPEND LCAT TO FIELDCAT.
CLEAR LCAT.
LCAT-FIELDNAME = 'BAL'.
LCAT-TABNAME = 'IT_STD_FINAL'.
LCAT-SELTEXT_L = 'Accumulated Balance'.
LCAT-JUST = 'M'.
APPEND LCAT TO FIELDCAT.
CLEAR LCAT.
endform. " FIELD
*& Form DISPLAY
text
--> p1 text
<-- p2 text
form DISPLAY .
CLEAR: IT_STD_BSAK,IT_STD_BSIK, IT_STD_LFA1 .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_PF_STATUS_SET = 'STATUS '
I_CALLBACK_USER_COMMAND = ' '
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT = LAYOUT
IT_FIELDCAT = FIELDCAT[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT = IT_SORT
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS = EVENTS
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_HTML_HEIGHT_TOP = 0
I_HTML_HEIGHT_END = 0
IT_ALV_GRAPHICS =
IT_HYPERLINK =
IT_ADD_FIELDCAT =
IT_EXCEPT_QINFO =
IR_SALV_FULLSCREEN_ADAPTER =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = IT_CHARG
t_outtab = IT_STD_FINAL[]
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "DISPLAY
*& Form EVENTS
text
--> p1 text
<-- p2 text
form EVENTS USING P_EVENTS TYPE slis_t_event.
DATA: ls_event TYPE slis_alv_event.
ls_event-name = 'TOP_OF_PAGE'.
ls_event-form = 'TOP_OF_PAGE'.
APPEND ls_event TO P_EVENTS.
endform. " EVENTS
*& Form TOP_OF_PAGE
text
FORM TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = TOP.
ENDFORM. "TOP_OF_PAGE
*& Form LAYOUT
text
--> p1 text
<-- p2 text
form LAYOUT .
LAYOUT-ZEBRA = 'X'.
LAYOUT-INFO_FIELDNAME = 'LINE_COLOR'.
LAYOUT-COLWIDTH_OPTIMIZE = 'X'.
APPEND LAYOUT." TO LAYOUT.
endform. " LAYOUT
*& Form EVENTS_1
text
-->P_EVENTS text
FORM EVENTS_1 USING P_EVENTS TYPE slis_t_event.
DATA: ls_event TYPE slis_alv_event.
WRITE: SY-UNAME.
ls_event-name = 'END_OF_PAGE'.
ls_event-form = 'END_OF_PAGE'.
APPEND ls_event TO P_EVENTS.
ENDFORM. " EVENTS_1 -
Please help me with spry bar menu
I have laid out my page with the div tags in Dreamweaver. I defined the different sections by putting colors in them until i am ready to put stuff into them however when i insert the spry menu bar into my navigation section, the area below it is behaving like a drop down box of color. What i mean is that the area below which is supposed to stretch from left to right as a single box is now broken up by a different color box the width of the spry bar and goes down to the next box. When i preview it in the browser the page appears normal. How can i get rid of the intruding box in dreamweaver.
HI
I am practicing for the webmaster design course pratical exam. The web page i will be asked to construct will consist of a home page with two or three other pages pages in the site it will have to link to. I know how to do most of the steps individualy but i do not know in what order some of them are done. What i mean is this. ... after setting up the root folder..images..laying out the divs .. i would like to know ... at what point do i do the various things like, set up a styles folder...make a template... make the other pages of the site ..etc. I think i am able to do nearly all of these things but not sure in what order they should be done so the site will work.
I have reached the point where i have established the site and layout, i.e. the wrapper, logo, navigation,header,bodycontent,right and left columns, clearbar, footer. i would like someone to list the sequence i should follow after this. I am praticing on a trial CS5.5 which seems to simplfy to a freat extent what we learned on the course because it is a later version. The version we used on course was CS4 and if the pratical is in this version then i will need to know how it is done in this format.
Date: Sun, 22 Jan 2012 17:45:18 -0700
From: [email protected]
To: [email protected]
Subject: Please help me with spry bar menu
Re: Please help me with spry bar menu created by Nancy O. in Dreamweaver - View the full discussion
If this only happens in DW Design View, use Live View or turn off your CSS display.
View > Style Rendering > un-tick Display Styles.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4157994#4157994
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4157994#4157994. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Dreamweaver by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
Please help me with simple program
Can someone please write a simple program for me that opens up a webpage in the center of the screen , with a set size, and then asks the user where they would like to click on the screen. Then once the person clicks it asks how many times they would like to click there, and then once they enter the # the program opens up the webpage (in the center at the same spot as before, with the same set size) and automatically clicks on the predesignated spot , and then closes all open internet windows, and keeps doing it for however many times the person chose. PLEASE HELP ME WITH THIS!!! If you could, please post the source code here. Thank you so much to whoever helps me!!!!!!!
If it's not to learn, then what is the purpose of
this project?well, if it's not HW and its not for learning java, then why the hell would anyone like to have a program that may open a webpage and then repeatedly click on predefined place...
let me see...
now if he had asked for program that fakes IP as well, then i would suggest that he tryes to generate unique clicks, but now... i'm not sure... maybe just voting in some polls or smthing... though, i would not create a program that clicks on the link or form element, but rather just reload url with given parameters for N times... -
Please, help me to set up wireless Internet connection. M...
Please, help me to set up wireless Internet connection. My router is WRT54GS. I able to get online when computer is wired direct to VPN internet cable.
First, I can’t open password request screen on http://192.168.1.1.
Second, when "Setup wizard" runs step #6 (“Check the router’s status”), the program asks for the password. Default password “admin” is rejected by the program and I can’t install Linksys software. Just in case I already pressed reset switch on the back of the router but to no avail.
Third, I don’t find out my Ethernet Adapter Wireless Network Connection and correct router’s IP address using ipconfig/all command after connecting WRT54GS with my computer. Ethernet adapter: DHCP disabled, subnet mask 255.255.255.0, IP address 10.32.132.193, default gate 10.32.132.1.
Tell me please: what’s the matter?Pensive wrote:
Please, help me to set up wireless Internet connection. My router is WRT54GS. I able to get online when computer is wired direct to VPN internet cable.
First, I can’t open password request screen on http://192.168.1.1.
Second, when "Setup wizard" runs step #6 (“Check the router’s status”), the program asks for the password. Default password “admin” is rejected by the program and I can’t install Linksys software. Just in case I already pressed reset switch on the back of the router but to no avail.
Third, I don’t find out my Ethernet Adapter Wireless Network Connection and correct router’s IP address using ipconfig/all command after connecting WRT54GS with my computer. Ethernet adapter: DHCP disabled, subnet mask 255.255.255.0, IP address 10.32.132.193, default gate 10.32.132.1.
Tell me please: what’s the matter?
hi pensive ,
Seems interesting , first do this - push the reset button on the back of router .
push it till 30 seconds , unplug the power cable and plug in the power cable back in After completion of 30 seconds.
then try to log into , 192.168.1.1 again . with the password "admin".
see if it reply?
Else -
strt>cmd>ipconfig /all - post the result ?
pe@c3
Message Edited by meteor on 01-09-2008 05:58 AM
~~~Nobudy's Perfect , i try To Be So ! Each n every moment of maH LYF , AND I THINK dat wats make Me "Different" From others....~~~ -
everything freezes i can't even force quit i have to shut off by holding the power button down please help me with this. thanks
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test. -
Please help me with this statement
Hi gurus, glad to be back!
Please help me with this XML processing statement. The XMl I get is like this,
<EnumerationValue description="Motor Carriers-Operate w/o Certificate or Permit"
effectiveDate="1859-01-01">
<Text>26</Text>
<AssociatedValue type="SeverityLevelText" code="MSD">
<Text>Misdemeanor</Text>
</AssociatedValue>
<AssociatedValue type="SeverityLevelText" code="PMD">
<Text>Petty Misdemeanor</Text>
</AssociatedValue>
<AssociatedValue type="StatuteOrdinanceRuleCite">
<Text>221.291.4</Text>
</AssociatedValue>
I need to get the number value from <Text>26</Text>, the attribute description and the text value of <Text>221.291.4</Text> inside one of those AssociatedValue node. The following is what I have, though I get the 26, I do not get the description and I get the Misdemeanor, Petty Misdemeanor concatenated with the text value of <Text>221.291.4</Text>. The output I get is this,
26
MisdemeanorPetty Misdemeanor221.291.4MisdemeanorPe
4
MisdemeanorPetty Misdemeanor221.291.4MisdemeanorPe
My Code:
declare
v_xml sys.xmltype;
v_sid number;
v_SText varchar2(50);
begin
v_xml := sys.xmltype('<SimpleTypeCompanion>
<EnumerationValue description="Motor Carriers-Operate w/o Certificate or Permit" effectiveDate="1859-01-01">
<Text>26</Text>
<AssociatedValue type="SeverityLevelText" code="MSD">
<Text>Misdemeanor</Text>
</AssociatedValue>
<AssociatedValue type="SeverityLevelText" code="PMD">
<Text>Petty Misdemeanor</Text>
</AssociatedValue>
<AssociatedValue type="StatuteOrdinanceRuleCite">
<Text>221.291.4</Text>
</AssociatedValue>
</EnumerationValue>
<EnumerationValue description="Police Communication Equipment-Possession, Use-First Offense-M" effectiveDate="1859-01-01">
<Text>4</Text>
<AssociatedValue type="SeverityLevelText" code="MSD">
<Text>Misdemeanor</Text>
</AssociatedValue>
<AssociatedValue type="SeverityLevelText" code="PMD">
<Text>Petty Misdemeanor</Text>
</AssociatedValue>
<AssociatedValue type="StatuteOrdinanceRuleCite">
<Text>299C.37.1(b)</Text>
</AssociatedValue>
</EnumerationValue>
</SimpleTypeCompanion>');
---dbms_output.put_line(v_xml.getStringVal());
declare
cursor c_statutes is
select ms.* from
xmltable('for $s in /SimpleTypeCompanion/EnumerationValue/Text
let $sa := /SimpleTypeCompanion/EnumerationValue/AssociatedValue
let $sd := /SimpleTypeCompanion/EnumerationValue/@description
where $sa/@type = "StatuteOrdinanceRuleCite"
return
<MyStatutes>
<TextID>{$s}</TextID>
<SDesc>{$sd/@description}</SDesc>
<StatuteNumber>{$sa/Text}</StatuteNumber>
</MyStatutes>'
passing v_xml
columns
myTextID number path '/MyStatutes/TextID',
mySDesc varchar2(150) path '/MyStatutes/SDesc',
myStatute varchar2(50) path '/MyStatutes/StatuteNumber'
) ms;
begin
for v_s in c_statutes loop
dbms_output.put_line(v_s.myTextID);
dbms_output.put_line(v_s.MySDesc);
dbms_output.put_line(v_s.myStatute);
end loop;
end;
end;
Please show me the correct way to get the result I want.
Thanks a lot!
BenSQL> var xmltext varchar2(4000)
SQL> --
SQL> begin
2 :xmltext :=
3 '<SimpleTypeCompanion>
4 <EnumerationValue description="Motor Carriers-Operate w/o Certificate or Permit" effectiveDate="1859-01-01">
5 <Text>26</Text>
6 <AssociatedValue type="SeverityLevelText" code="MSD">
7 <Text>Misdemeanor</Text>
8 </AssociatedValue>
9 <AssociatedValue type="SeverityLevelText" code="PMD">
10 <Text>Petty Misdemeanor</Text>
11 </AssociatedValue>
12 <AssociatedValue type="StatuteOrdinanceRuleCite">
13 <Text>221.291.4</Text>
14 </AssociatedValue>
15 </EnumerationValue>
16 <EnumerationValue description="Police Communication Equipment-Possession, Use-First Offense-M" effectiveDate="1859-01-01">
17 <Text>4</Text>
18 <AssociatedValue type="SeverityLevelText" code="MSD">
19 <Text>Misdemeanor</Text>
20 </AssociatedValue>
21 <AssociatedValue type="SeverityLevelText" code="PMD">
22 <Text>Petty Misdemeanor</Text>
23 </AssociatedValue>
24 <AssociatedValue type="StatuteOrdinanceRuleCite">
25 <Text>299C.37.1(b)</Text>
26 </AssociatedValue>
27 </EnumerationValue>
28 </SimpleTypeCompanion>';
29 end;
30 /
PL/SQL procedure successfully completed.
SQL> set lines 150
SQL> --
SQL> select ms.*
2 from xmltable
3 (
4 '/SimpleTypeCompanion/EnumerationValue'
5 passing xmltype(:xmltext)
6 columns
7 DESCRIPTION varchar2(32) path '@description',
8 STATUTE_ID number(2) path 'Text/text()',
9 STATUTE_RULE_CITE varchar2(16) path 'AssociatedValue[@type="StatuteOrdinanceRuleCite"]/Text/text()',
10 MSD_TEXT varchar2(10) path 'AssociatedValue[@code="MSD"]/Text/text()',
11 PMD_TEXT varchar2(10) path 'AssociatedValue[@code="PMD"]/Text/text()'
12 ) ms
13 /
DESCRIPTION STATUTE_ID STATUTE_RULE_CIT MSD_TEXT PMD_TEXT
Motor Carriers-Operate w/o Certi 26 221.291.4 Misdemeano Petty Misd
Police Communication Equipment-P 4 299C.37.1(b) Misdemeano Petty Misd
SQL>
SQL> -
Please help me with this calculation script
Hello everyone.
I have 2 fields named A and B. FieldA is user-enter value and FieldB is calculated. I want to write a script that do the following:
If FieldA is more than or equal to $10000, then FieldB always is $1000, Else FieldB = FieldA * 10%.
I don't know about scripting; however, after hour of search through google, I wrote this one:
var tvar
If (tvar >= 10000)then deposit.value = 1000
else deposit.value = total.rawValue*0.01
endif
And when I try to run, it say "Invalid Property Set Operation, value doesn't have a default property."
I know my script is bad and over the place. Can anyone please help me with this problem ASAP. Thank you so much, I'm in your debt.
I used Adobe LiveCycle Designer to create a PDF file.Thank you for your response.
tvar = total
At first I wrote it like this:
If (total.rawValue >= 10000)then deposit.rawvalue = 1000
else deposit.rawvalue = total.rawValue*0.01
endif
then I get an error message "accessor 'Total.rawValue' is unknown"
Hic, I think my script is screwed. Can you help me start fresh :)
Thank again. -
Please help me with portfolio.I am new in graphic design.I need portfolio done immediately soon as possible otherwise my design advisor will not let me register for fall. I need 15 or 10 artworks to show.Please help me.
Farooq,
If you look at the first one, you should be able to align quite easily as follows, View>Smart Guides being your friends:
1a) ClickDrag the top flower with the Selection Tool (black arrow) so it is clear of the pointy part;
1b) Click an empty spot on the Artboard to deselect, then ClickDrag the top flower by its bottom Anchor Point (Smart Guides say anchor when you are close enough to grab it) down to snap to the top Anchor Point on the pointy part (Smart Guides say anchor when you are close enough);
1c) Do the same for the boroom flower.
If you look at the third one, to get the triangles and the hexagon sized and aligned precisely, you may, creating them with stroke and no fill:
3a) Click with the Polygon Tool and select a suitable/chosen Radius and 6 Sides, then Object>Transform>Rotate by 30 degrees (or use the Rotate option in the Transform palette), you may Object>Transform>Reset Bounding Box to have it look nicer;
3b) Click with the Polygon Tool and select the same Radius and 3 sides, then deselect and ClickDrag the top Anchor Point to snap to the top Anchor Point of the hexagon;
3c) Object>Transform>Rotate by 180 degrees clicking Copy, deselect, and ClickDrag the bottom Anchor Point to snap to the bottomAnchor Point of the hexagon;
3d) Select all and Ctrl/Cmd+G to Group (for alignment purposes, you will know why if you try without grouping, see below).
To create full symmetry, you may use circles rather than almost circular ellipses; you may:
3d) Click with the Ellipse Tool and select a suitable/chosen Width = height;
3e) Object>Transform>Move a copy vertically by the Height (= Width) twice (or you may Ctrl/Cmd+D to repeat), to get three circles over one another with no gaps;
3f) Select the topmost and bottommost ones and Object>Transform>Rotate a copy by 120 degrees twice, to have all the seven circles precisley touching one another; you may Group them, but it is not necessary.
To have everything aligned, just:
3g) Select everything and click Vertical Align Center and Horizontal Align Center in the Align palette; you may click the pointy group or the circles ojnce more before aligning if you want to keep it in place (that will make it the key object that the other set is aligned to).
These ways may also help you further.
Edit: About half an hour after midnight here. High time to attend to other duties, before the sun is up. -
HT201401 Q) Can anyone please help me with this: My in coming call ringing tone not working?
Q) Can anyone please help me with this: My in coming call-messges ringing tone not working? All I am getting in Vabration + Flashing light when receiveing messages or incoming Calls. I am missing my phone Calls constantly. Please Help me?
I have just received this phone as a replacement from my insurance company, as I had lost my own phone. It has taken them 3 weeks to sort this out. This has ruined my business because it has taken so long. I really do not have time to send it back to them. Because it will waist another three weeks for them to sort it out again. Please Help!HA! By Jove I've Got it! it was simples..
TURN ON THE RINGING ON / OFF BUTTON ON THE SIDE OF YOUR PHONE JUST ABOVE THE VOLUME BUTTONS. THEN MAKE SURE THE VOLUME IS UP TO THE HIGHEST. NOW JUST TRY THIS!
I ALSO LOOKED UP A MANUAL ON IPHONE4:
Ringtones, Ring/Silent switch, and vibrate
iPhone comes with ringtones that sound for incoming calls, Clock alarms, and the Clock timer.
You can also purchase ringtones from songs in iTunes. See Chapter 22, iTunes Store, on page 94.
Set the default ringtone: Go to Settings > Sounds > Ringtone.
Turn the ringer on or off: Flip the switch on the side of iPhone.
Important: Clock alarms still sound even if you set the Ring/Silent switch to silent.
Turn vibrate on or off: Go to Settings > Sounds.
Assign a different ringtone for a contact: In Contacts, choose a contact, tap edit, then tap
Ringtone and choose a ringtone.
For more information, see Sounds on page 139.
THE REASON MY PHONE HAD NO RING TONE, WAS SIMPLY BECAUSE THE VOLUME WAS TURNED DOWN. :-/
I HOPE THIS HELPS OTHERS INFUTURE! :-D -
I'm currently living in Saudi Arabia but I bought my iPad 3 from Dubai around 6 days ago, my device is still under warranty but none of the apple stores are fixing it over here in Saudi Arabia... Please help me with my situation!
Hi Eric Ferguson,
Thanks for using Apple Support Communities.
For troubleshooting on this, take a look at this article:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/ts3694
Error 13, 14, 35 and 50 (or -50)
These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network.
Best of luck,
Mario
Maybe you are looking for
-
Photoshop CC 2014 doesn't recognize my ATI 4870
Hello guys, I have just installed Windows 8.1 + all updates. After that of course the Photoshop CC 2014 was installed cause I work a lot with my photos. Earlier I had win 7 64bit and now win 8.1 64bit. I have a problem cause PS CC doesn't recognize m
-
SQL Server 2012 installation problem (error server didn't respond in timely fashion ....)
Hi everyone, I am new to SQL server....I am learning C# programming using visual studio 2013 . And I want to learn SQL database language to create and practice C# database project....My computer meets all the hardware requirement for SQL installation
-
I am unable to share or export out my movie. I keep getting an publishing error 49?
I am using a mack book pro and imovie 11. I am trying to share/export the file out to my desktop. The video clip is being shared for an hour or so and when I get down to a minute left, It says there was a publishing error (-49). Can anyone help!
-
Any other realtors having issues with updating their Suprakey on their Android?
Any other realtors having issues with updating their Suprakey on their Android?
-
I have just changed my iPad mini password a day ago, and when trying to access it today it worked fine until about 4:30 (GMT) when I could not access the device using the correct password. I am absoloutley 100% sure it's correct.Additional details:I