PLEASE HELP ME WITH SWF FILES ON E65
PLEASE IF YOU KNOW TELL ME HOW TO USE SWF FILES(FLASH FILES,ANIMETED SCREENSAVERS)AS SCREENSAVER ON MY NOKIA E65.
THANKS A LOT!
SORRY FOR MY BAD ENGLISH!
So far, importing Flash into Keynote has turned up a big, fat "NO!" I am REALLY disappointed by this. Both Adobe and Apple's attitude towards interoperability is just making us, the end user, unhappy. What happened to "it just works"? Why is Apple so against Flash?
So far I've found no easy way to get my Flash project into a Keynote presentation. There seems to be several rather complicated methods. I don't need this. I'm very miffed.
Similar Messages
-
Please help me with .flv files
Hi Everyone, first of I am a newbie when it comes to
dreamweaver and flash. I am trying to create a slideshow video to
play on my website. I am haveing ZERO luck this is day 3 of this
adventure and I just can't figure it out.
This is what I want to have my slideshow look like.
http://www.mod4.com/slideshows/erin/
However I don't know if I'm using the right programs or
exporting things correctly cause my slideshows are grainy distorted
and look like dung.
I have After Effects, Premier Pro, AVID Express HD, Flash 8,
Dreamweaver and Frontpage at my disposal. For the slideshow I am
using Iphoto as that program does the Ken burns effect very easeily
and quickly. It then exports them as a quicktime.
But my problem is getting the .flv file to be clean, small
and playing on my website without any problems.
I've gotten it to play but only for like 10 seconds out of
the 3 minutes.
http://www.officialratemyweddingvendor.com/slideshows.html
ANY help would be apprecitated.
Thanks!> I've gotten it to play but only for like 10 seconds out
of the
3 minutes.
Well, the Flash video file you've uploaded (
http://www.officialratemyweddingvendor.com/Videos/ThisisITFLV.flv
) is only
11.5 seconds in duration:
Perhaps it's become corrupted during upload? Does is play OK
locally for
you? -
PLEASE HELP-problem with downloaded files!
I have downloaded some games and stuff from the internet to my new iMac(Leopard10.5.1). I open the files, copy to applications, or install from the folder-and that should be it, right?? Unfortunately, this is not so! I have to go through this same process every time I want to use one of my downloads. I have to re-enter serial numbers and all that stuff EVERY TIME!!! Why is this happening? I don't understand...
No, it's the computer. The files are fine, the computer just doesn't seem to keep the info once I install. Never had this issue with any of my previous macs.
-
Hi, I'm stuck at step 9. I don't see my external harddrive when I want to save the DMG backup file. Can you please help me with this? I'm desperate to make this backup! Big thanx in advance!
http://support.apple.com/kb/HT1553Repair permissions and restart your computer. If this does not work, zap the pram. You should now see your external hard drive.
-
please help problem with importing a file error output "there was an error decompressing audio or video"
this is related to what adobe program/version?
-
i cannot transfer some videos to my iphone 3gs. the file is in MPEG4 format. i can view in itunes but cannot be transfered to iphone. Please help me with this problem.
In iTunes, Advanced>Create iPod or iPhone version
-
Hi, I have a problem with opening files on my desktop. When i double click a file I would lime to open nothing happens. Please help me with this problem
hello, this might be a preference in your google search settings. go to google.com/preferences and disable the option to ''Open search results in a new browser window''.
-
please help me with msi installer file for 11.6.8.* as this is our standard version which we use for all machines in our organization
arai-c wrote:
I have full version of this software but I am not able to install it silently because it always gives Google toolbar pop up which We dont required
arai-c wrote:
the problem is we dont have msi file for 10.6.*.* and hence I am not able to create package for it
I don't understand; two days ago you wrote that you have it, now you don't...?
If you don't have it, then why not deploy the current version 12.1.3.153 - I don't see the point of installing an old, unsecure software version. -
Please Help me with the error P6
I recently installed the Primavera P6 but when I started
using it for the first time I get the following error
message :
C:\Program files\Primavera\Project
Management\Languages\comCaptions.en-us
<br
/>Please help me with this error ;
ThanksHi,
This sounds like an issue
that might best be handled by support. You can find
information on contacting support here:<br
/><br
/>http://www.primavera.com/customer/support.asp<br
/>
Thanks,
Sean -
Please help me with the homework given to me by my teacher
hello,i am new in java programming please help me with the home work given to me by my teacher at school, help me to build an interface that can work with this code.i can build an interface but i dont just understand this code.
//references:
//http://forums.techguy.org/development/570048-need-write-java-program-convert.html
import java.util.Map;
import java.util.HashMap;
import java.util.Iterator;
import java.io.FileNotFoundException;
import java.io.IOException;
import java.io.BufferedReader;
import java.io.FileReader;
public class Translate
public static void main(String [] args) throws IOException
if (args.length != 2)
System.err.println("usage: Translate wordmapfile textfile");
System.exit(1);
try
HashMap words = ReadHashMapFromFile(args[0]);
System.out.println(ProcessFile(words, args[1]));
catch (Exception e)
e.printStackTrace();
// static helper methods
* Reads a file into a HashMap. The file should contain lines of the format
* "key\tvalue\n"
* @returns a hashmap of the given file
@SuppressWarnings("unchecked")
private static HashMap ReadHashMapFromFile(String filename) throws FileNotFoundException, IOException
BufferedReader in = null;
HashMap map = null;
try
in = new BufferedReader(new FileReader(filename));
String line;
map = new HashMap();
while ((line = in.readLine()) != null)
String[] fields = line.split("\\t", 2);
if (fields.length != 2) continue; //just ignore "invalid" lines
map.put(fields[0], fields[1]);
finally
if(in!=null) in.close(); //may throw IOException
return(map); //returning a reference to local variable is safe in java (unlike C/C++)
* Process the given file
* @returns String contains the whole file.
private static String ProcessFile(Map words, String filename) throws FileNotFoundException, IOException {
BufferedReader in = null;
StringBuffer out = null;
try {
in = new BufferedReader(new FileReader(filename));
out = new StringBuffer();
String line = null;
while( (line=in.readLine()) != null ) {
out.append(SearchAndReplaceWordsInText(words, line)+"\n");
} finally {
if(in!=null) in.close(); //may throw IOException
return out.toString();
* Replaces all occurrences in text of each key in words with it's value.
* @returns String
private static String SearchAndReplaceWordsInText(Map words, String text) {
Iterator it = words.keySet().iterator();
while( it.hasNext() ) {
String key = (String)it.next();
text = text.replaceAll("\\b"+key+"\\b", (String)words.get(key));
return text;
* @returns: s with the first letter capitalized
String capitalize(String s)
return s.substring(0,0).toUpperCase() + s.substring(1);
}... here's the head of my pirate_words_map.txt
hello ahoy
hi yo-ho-ho
pardon me avast
excuse me arrr
yes aye
my me
friend me bucko
sir matey
madam proud beauty
miss comely wench
stranger scurvy dog
officer foul blaggart
where whar
is be
are be
am be
the th'
you ye
your yer
tell be tellin'Heres your answer. Run it in on your pc.
public class Annoy
public static void main(String[] args)
System.out.println("I am a triple poster.");
System.out.println("I can not understand why I can not understand the help I have receved to date on the java forums.");
} -
Can anyone please help me with this error: "Apple application support was not found... Error 2"
I've followed the instructions by removing all Apple files from my laptop, but when I reinstall the iTunes software it still comes up with this message:
"Apple application support is required to run iTunesHelper. Please uninstall iTunes, then install iTunes again. Error 2"
Thank youiTunes "Apple Application Support is required... Error 2" and possible fix.
I know this is a bit late but I came accross this thread trying to resolve this same problem and came up with a solution that worked for me, so thought I would share it here too. I hope it helps someone else.
I just resolved this on Win Vista (should apply equally for Win7 too). Please uninstall iTunes before proceeding though. I'll walk you through the process I followed, if you like you can jump straight to the Solution section.
Problems:
The initial error during the installation of iTunes was:
An error occurred during the installation of assembly 'Microsoft.VC80.CRT,version="8.0.50727.4053",type="win32",publicKeyToken='1fc8b 3b9a1e18e3b",processorarchitecture="x86". Please refer to Help and Support for more information. HRESULT:0x8007054F
The error (after installing iTunes) when trying to run iTunes was:
Apple Application Support is required to run iTunes. Please uninstall iTunes, then install iTunes again. Error 2 (Windows error 2).
After trying various fixes around the forums I came across this MSKB article, which relates to the first installation error:
http://support.microsoft.com/kb/2688946
This lead me to trying to install MS Visual C++ but I received the following error trying to install that:
Error 1935.An error occurred during the installation of assembly ‘Microsoft.VC80.ATL,type=”win32”,version=”8.0.50727.762”,publicKeyToken=”1fc8b3 b9a1e18e3b”,processorArchitecture=”amd64”’. Please refer to Help and Support for more information. HRESULT: 0x80070BC9. Assembly interface: IassemblyCacheItem, function: Commit, component: {837BF1EB-D770-94EB-A01F-C8B3B9A1E18E}
Note: The installation of VC++ rolls back when it fails.
Solution:
Through this error I found this MSKB article:
http://support.microsoft.com/kb/946414
The Automated MS "Fix It" msi package didn’t work.
Note: Please backup your registry first (see the above MSKB article for instructions).
I opened the registry and (as instructed in the MSKB article) deleted the following keys:
HKEY_LOCAL_MACHINE\COMPONENTS\
PendingXmlIdentifier
NextQueueEntryIndex
AdvancedInstallersNeedResolving
Reboot and reinstall iTunes.
If it helps you please like this so others can find it. -
everything freezes i can't even force quit i have to shut off by holding the power button down please help me with this. thanks
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test. -
Please help me with this calculation script
Hello everyone.
I have 2 fields named A and B. FieldA is user-enter value and FieldB is calculated. I want to write a script that do the following:
If FieldA is more than or equal to $10000, then FieldB always is $1000, Else FieldB = FieldA * 10%.
I don't know about scripting; however, after hour of search through google, I wrote this one:
var tvar
If (tvar >= 10000)then deposit.value = 1000
else deposit.value = total.rawValue*0.01
endif
And when I try to run, it say "Invalid Property Set Operation, value doesn't have a default property."
I know my script is bad and over the place. Can anyone please help me with this problem ASAP. Thank you so much, I'm in your debt.
I used Adobe LiveCycle Designer to create a PDF file.Thank you for your response.
tvar = total
At first I wrote it like this:
If (total.rawValue >= 10000)then deposit.rawvalue = 1000
else deposit.rawvalue = total.rawValue*0.01
endif
then I get an error message "accessor 'Total.rawValue' is unknown"
Hic, I think my script is screwed. Can you help me start fresh :)
Thank again. -
Please Help me with Oracle Reports (10G)
Hi ,
I have created a report in Oracle 10G and save it as .JSP file, while i tried to open
that .jsp file through edit plus i observed that reportbuilder have generated a code for what i have done in Layout but all the code is commented, why was it happened so , Do it effect the functionality of my report.
Please help me with this
Thanks and Regards
Kalyan ChittiHello Chris90909,
switch width an height properties as Inol mentioned.
http://nycapex.blogspot.com/2010/03/landscape.html
If you have any question about the issue, let us know.
Don't forget to mark Correct or Helpful accordingly. -
Very Urgent Please Help Me with XML parsing(DOM parser)
Hi
Please help me with the following code.
I have an XML file
<catalog>
<book id="101">
<title>First Ex With ID 101</title>
<ID>500</ID>
<author>RAJU</author>
<price>39.95</price>
</book>
<book id="121">
<ID>501</ID>
<title>First Ex With ID 121</title>
<author>RAJU1</author>
<price>19.95</price>
</book>
</catalog>
By using DOM parser I have to retrive ID values .After getting this ID values i have to pass these values in someother method of someother class.What i suppose to do?Can anyone help me with this regards ,if possible plese write the code..
Regards
Raju GWell first up all create a parser class where u parse the document using DOm and get the id node and assigen it to a String sat str.
Now whatever processiong u want to do , u write in a separate class (say Process.java) in one method say doProcess(String str)
Now from parser class u just call the doProcess() method with passing str as a parameter.
eg.
Process p = new Process();
p.doProcess(str);
Hope this will help u.
....yogesh
Maybe you are looking for
-
Excise duty is not displaying in MIGO
Dear All., I have captured excise invoice against Purchase Order in J1IEX .Then i have done GR for that PO. While doing GR, I have referred the excise invoice which was previously captured against PO. After posting the GR,when i display it in MIGO,e
-
G5 Won't Turn On. Period.
Hello everyone. I read several of the existing threads, did a search, and even ran some diagnostic tests in the hopes I'd find answers to my problem to no avail. So I turn to you. In short--I press the power button on the back of the unit and nothing
-
How to build data model in Endeca Server?
After completed the Quick Start Guide, I'm still confused about Endeca components. From the view of BI, there should be a data model built in Endeca Server, and a tool to develop and administrate the data model. Which component acts as this role, Clo
-
Sony Bridge 2.1 workarounds and fails
It is sad to see Sony is following the fallacy that lead to ruin of many companies, but it is here: Sub-par software that shouldn't be called more than beta, bad user experience for the sake of following "market experts and statistics" etc... etc...
-
Help with running ragnarok online.... Errors -.- .
Hello, i have been trying and trying to run ragnarok online. Some reason, it won't work! Ok so i did this: wine Valkyrie.exe So now it goes and runs the Exe and all that. But then in when i press start game, it shows me an error log. Heres what it sa