Please help me with this ipad problem
it like some kind of ios error it like it turned in to ipod,iphone ios
and i cant restore when i try it said an error occured 3194 or 1601 or 1600
and i try to restore in my ipad it didnt finish yet it is in progress for 1 day now!!!!!!
and my device is jailbreak but i didnt use installous i only use it for like winterboard and gravipad or barrel i buy all the app
PLEASE PLEASE HELP ME!!!!!!!!!!
I'm not good at English (i am thai) and what is op mean and yes you are right this is my other account.
Next time I will do better แบบทำเนี่ยนเนี่ยนอะไอ้เฟยเรามาขอให้ช่วยอแปไรเราก็ซื้อเองหมดอยากสนับสนุน apple ไม่เคยไช้เลยไอ้app cake ไรนั่นเราใช้แต่โปรแกรมเสริมเช่นwinter board barrel folder lock ไรเงี้ยเพราะ apple ไม่สามารถทำได
Similar Messages
-
Please help me with this strange problem again!
Hi gurus,
I can't, for the life of me, figure out why this does not work in a procedure but works in an anonimous block.
The XML is like this (part of it),
<CaseNotification messageProducedDateTime="2005-07-20T13:58:11-05:00" xmlns="http://www.courts.state.mn.us/CourtXML/2.0.0">
<NotificationAdminHeader caseNumberKey="87CR0569" xmlns="http://www.courts.state.mn.us/CourtXML/2.0.0">
<CaseCountyIdentifier>87</CaseCountyIdentifier>
<CaseLocationText>Yellow Medicine County</CaseLocationText>
<BaseCaseTypeText>Adult</BaseCaseTypeText>
<CaseCategoryText>Criminal</CaseCategoryText>
<PartyIdentifier partyKey="854">
<PartyCaseAssociationText>Jurisdiction</PartyCaseAssociationText>
</PartyIdentifier>
<PartyIdentifier partyKey="123637">
<PartyCaseAssociationText>Defendant</PartyCaseAssociationText>
</PartyIdentifier>
</NotificationAdminHeader>
<InterimConditionsNotification>
<TriggeredDateTime>2005-07-20T13:57:53-05:00</TriggeredDateTime>
<NotificationEvent>InterimConditionsDeleted</NotificationEvent>
<InterimConditionsOrder orderEventKey="1760110">
<OrderDate>2005-07-20</OrderDate>
<OrderedBy judgeKey="00001J">
<JudgeName>
<PersonGivenName>John</PersonGivenName>
<PersonMiddleName>P.</PersonMiddleName>
<PersonSurName>Smith</PersonSurName>
<PersonFullName>Smith, John P.</PersonFullName>
</JudgeName>
<JudicialAgencyIdentifier>MN011015J</JudicialAgencyIdentifier>
</OrderedBy>
<CourtCaseNumber documentVersion="1" effectiveDateTime="2005-06-06T00:00:00-06:00">
<MNCISCaseNumber>
<CountyNumber>87</CountyNumber>
<CaseType>CR</CaseType>
<YearFiled>05</YearFiled>
<SequenceNumber>69</SequenceNumber>
</MNCISCaseNumber>
<CaseNumberIdentifier caseNumberKey="87CR0569">87-CR-05-69</CaseNumberIdentifier>
</CourtCaseNumber>
<ConditionSubject>
<Party partyKey="123637" currentNameIndicator="true">
<StandardName>
<PersonGivenName>Clanry</PersonGivenName>
<PersonSurName>Ogavitz</PersonSurName>
<PersonFullName>Ogavitz, Clanry</PersonFullName>
</StandardName>
<PartyCaseAssociationText>Defendant</PartyCaseAssociationText>
</Party>
</ConditionSubject>
<InterimConditions>
<InterimConditionText>Anger management</InterimConditionText>
<InterimConditionAmount>0</InterimConditionAmount>
</InterimConditions>
<InterimConditions>
<InterimConditionText>Attend AA (Alcoholics Anonymous)</InterimConditionText>
<InterimConditionAmount>5000</InterimConditionAmount>
</InterimConditions>
</InterimConditionsOrder>
</InterimConditionsNotification>
</CaseNotification>
The code is basically the same except that in the procedure the passing clause gets a differnt param, which is the passed in param from the procedure.
xmltable
xmlnamespaces
--- 'http://schemas.xmlsoap.org/soap/envelope/' as "saop",
'http://www.courts.state.mn.us/CourtXML/2.0.0' as "ic"
'for $ics in //ic:CaseNotification/ic:InterimConditionsNotification/ic:InterimConditionsOrder[@orderEventKey = $val/oeKey]/ic:InterimConditions
return
<ic:ICS>
<ic:ICSText>{$ics/ic:InterimConditionText}</ic:ICSText>
<ic:ICSAmount>{$ics/ic:InterimConditionAmount}</ic:ICSAmount>
</ic:ICS>'
passing p_XMLDoc, xmlelement("oeKey", v_OEKey) as "val"
columns
ICSText varchar2(100) path '/ic:ICS/ic:ICSText',
ICSAmount number path '/ic:ICS/ic:ICSAmount'
The strange thing is the procedure gets the ic:ICSText with the namespace value, which is http://www.courts.state.mn.us/CourtXML/2.0.0, so the finaly result is
the whole thing: <InterimConditionText xmlns="http://www.courts.state.mn.us/CourtXML/2.0.0">Anger management</InterimConditionText>.
I get the correct values when testing with the anonimous code!
What did I do wrong? Please help!
Thank you.
BenHi gurus,
OK, I did another test. I ran the same PL/SQL anonymous block that gets the correct element value in 10.2.0.3.0 and it gets the same wrong value: the element name plus the namespace value and the data itself. It gets the correct element value in 10.2.0.1.0 (my local database).
Could anyone help me with this?
Thanks!
Ben -
Someone please help me with this sync problem
Ok here we go. I have had my laptop for a little over two years. Ever since i got my iphone 4 last summer it has been such a pain. I have backed up my phone and synced it multiple times on my computer. Every so often though i plug my iphone into the computer and it recognizes it in itunes but asks me to either set as new iphone or restore from back up. I have tried to restore from back up and it says that the back up has failed even though there is obviously a back up on the computer. I have set as new and it works fine for a day or two and then i got to resync and same problem. I have completly unistalled itunes and all its files and redownloaded it and it worked for a week or so and then same problem. I have also had my computer reset to factory settings (for an unrelated issue) and it worked the first time but then stopped working. I have tried everything i can imagine and am at the end of my rope with this phone. im so ready to call it quits and get something different cause this is so frustrating.
How do you do what? Plug the iPhone into a USB port directly on your computer, or disconnect other USB devices? To disconnect a USB device unplug it from the computer. If it is a disk drive eject it first using the Eject icon in the System Tray. To plug the iPhone into a USB port directly on the computer insert the USB end of the sync cable into a USB port on the computer.
If you are using all of the ports on your computer get a hub and plug low power devices into the hub (e.g., keyboard, mouse). Or get a hub with its own power supply and plug your high power devices (disk drives, DVD drive) into it. -
Please please please help me with this bizarre problem!!!
Hi there,
I am not an expert on web design and I am also not a complete newbie. I have built web designs before - and used frames and done it all on dreamweaver - however my target frames aren't working on this website and I'm not sure why???
I have two frames on my index page - one left and one right - the left is the menu and the right is the content of which ever button is selected from the menu in the left frame. However the targets don't work - when clicking on the buttons (links) it makes a new window pop up.
I have named the frames and saved the frame set as index.html.
The coding says for the shop button:
<td><a href="Shop.html" target="_right" onmouseover="MM_swapImage('Image4','','Images/Shop Button RO.jpg',1)" onmouseout="MM_swapImgRestore()"><img src="Images/Shop Button.jpg" name="Image4" width="163" height="56" border="0" id="Image4" /></a></td>
I have tried renaming the frames - tried a different computer - tried just about everything I can think of - it has always worked for me before but since building this site it doesn't! Have I missed something????
Please please help me - it's been driving me up the wall for 2 weeks!!!
Thanks in advance for yourhelp.
Pink
xxxI haven't used frames since the late 1990s, so can't be of much help :-)
Here's a tutorial that may help:
http://www.dwfaq.com/tutorials/Frames/framesets1.asp
Page 4 shows how to link pages correctly
Is there a specific reason why you are still using frames... they are very old hat and hardly used anymore these days :-)
Here's the reason why frames are evil:
http://apptools.com/rants/framesevil.php
Nadia
Adobe® Community Expert : Dreamweaver
Unique CSS Templates | Tutorials | SEO Articles
http://www.DreamweaverResources.com
Web Design & Development
http://www.perrelink.com.au
http://twitter.com/nadiap -
Please Help me with this flash problem, my life is depending on this!
If you visit www.fishtv.tv there is a flash document on the
left side, it is a box with pictures scrolling. I NEED to know how
what to open it with, and how to add a picture into it. Please if
you have any information how to accomplish this task reply to this
thread, OR send me an email at [email protected] It will be
very much appreciated, thanks.SWF is to FLA the same way JPG is to PSD. SWF is the compiled
(think flattened) format. Like urami
once said, you can't get the egg back after making the
omelette. There are SWF decompilers (search
google or this forum) out there but most will (if not all)
will merely allow you to obtain the
"guts" of an swf - you will not really end up with the
original FLA again. MUCH easier to try and
locate the FLA or rebuild the site. Surely there's a back-up
of the source somewhere?
--> **Adobe Certified Expert**
--> www.mudbubble.com
--> www.keyframer.com
willager wrote:
> i have the swf file, and i open it in flash and it shows
the final product, I dont know how to get it back to its orginal
file. -
Please help me with this mac problem
I bought a mac pro without any applications installer (iPhoto, iMovie etc.) Is it really like that? Or there should be one? Btw, i bought OS X v10.
deggie wrote:
Did you purchase this computer from an authorized Apple dealer (or Apple Store) new or did you buy it from an individual?
Yeah that is my question also.
If bought Used from a Private person then you need to Register it with Apple on the Apple Website.
You should also check that it is a Late 2011 model as if it is an early 2011 model it may of originally came with Snow Leopard Pre-Installed and that means that is should not of been sold with Lion installed. As if it is a early 2011 model that did come with SL installed then Lion is regisrted to the original buyer of Lion and not to the serial # of that Mac. -
hey! i have a serious problem coming up which is that i am asked to enter my billing info even for free apps. why should i pay for apps which are free? please help me with this problem! and in the billing info there is pop-up box saying i have accessed my account from didfferent computer but no i have been doing it from the same pc. please help me out.
Tap Settings > General > International. Make sure the Region Format is correct.
As for your Apple ID. Tap Settings > Store > Apple ID > iForgot
Resetting your Apple ID may help.
Congrats on your new iPad !!! -
Hello, Honestly I just updated my 4s and my iPad 3 to iOS 6 and when try to press on the Music app or the iTunes app it says "cannot connect to iTunes Store" Could you please help me with this thank you so much, Charbel from Lebanon
See these previous discussions help.
App Store Updates (but only Updates)...: Apple Support Communities
Apps suddenly don't update: Apple Support Communities -
I cannot install Itunes and Icloud on my Sony Vaio Laptop - Window 7. Error says " computer/system not modified". Please help me with this problem.
Hello there, jag123059.
The following Knowledge Base article offers up some great steps to follow for resolving issues with installing iTunes:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
i cannot transfer some videos to my iphone 3gs. the file is in MPEG4 format. i can view in itunes but cannot be transfered to iphone. Please help me with this problem.
In iTunes, Advanced>Create iPod or iPhone version
-
Hi, I have a problem with opening files on my desktop. When i double click a file I would lime to open nothing happens. Please help me with this problem
hello, this might be a preference in your google search settings. go to google.com/preferences and disable the option to ''Open search results in a new browser window''.
-
I have a red vertical line on the right side of my screen and it will not go away tried restarting my computer and that didn't help at all, please help me with this problem it is kind of annoying
If it's a thin 1 pixel wide vertical line it's highly likely it could be caused by a defective LCD.
One quick basic way to check is to note the position of the line. Then go to System Preferences, Displays, and lower the resolution. If ther line moves it's on the video and the logic board or video card if fitted is likely to be defective. If the line stays in the same position it's likely to be an LCD fault. Either way to have it repaired you'll need to visit an Apple store or AASP.
The worst offender for this problem is the Late 2006 17" iMac. FOC replacement of the LCD used to be covered by a quality program, but it's now ended.
Steve -
i have a problem with xcode programming app when i lunch to it it asking me to enter my password and when i enter it the program show that it is wrong but am 100% sure it's wright so please help me with this issue thanks
That's not very intuitive
Check your mail server setup (mail>preferences>accounts>) choose your MobileMe account and select Outgoing Mail Server (SMTP) dropdown box, select Edit SMTP server list, verify that each instance of the me server has a password, if there are more than one and you only have one account then delete the one without a password. -
I just bought this movie "Godzilla 2014" but it won't show in my Movie Library. I closed my Itunes and put it back on again but still won't show up. I checked my purchased list and it shows that I recently bought the movie but when I checked the itunes store it wants to buy the movie again. Please help me with this right away Apple.
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Contacting Apple for support and service - this includes
international calling numbers..
For Mac App Store: Apple - Support - Mac App Store.
For iTunes: Apple - Support - iTunes. -
i brought a iTunes card and the the code on the back is not there it has faded away can u please help me with this problem
Hi Daniel ...
Try here > iTunes Store: Invalid, inactive, or illegible codes
Maybe you are looking for
-
How to change the name associated with iCloud email alias??
I had MobileMe on the iPhone with alias email addresses and I liked how it didn't attach any "name" to an alias. For example, I had MainUserName, then for aliases I would have [email protected], [email protected], etc. When I sent an email from my iP
-
Using windows 7, Firefox version 6.0.
-
BAPI - GR Against Outbound delivery in STO Process
Hi, For RF transactions i need to do GR Against Outbound delivery in STO Process, For that I need BAPI . Is the BAPI is 'BAPI_GOODSMVT_CREATE'. or something different. Regards, Jothiswaran.
-
Won't make sounds or vibrate. PLEASE HELP
I unplugged my iphone from my computer and tried to call someone. It wouldn't make any sound; no ringing tone, nothing. So i tried to play a song, it acted like it was playing but no sound came out. i checked all the settings and nothing is turned of
-
Revision: 11378 Author: [email protected] Date: 2009-11-02 12:43:46 -0800 (Mon, 02 Nov 2009) Log Message: Rearrange exisiting TLF sources to be in the same structure as the new drop we're about to take so that we can maintain the change histor