Please help me with upgrades for my eMac.
Hello to everyone,
I'm new to the Apple realm but far from new to hardware, software and computers.
Recently I was given (yes, miracles happen ) an old eMac 1.25GHz, 40GB, 384 Ram, i believe this is the USB 2.0 model. I immediately fell in love with it and am looking into upgrading it. I have already purchased and installed the Apple Airport Extreme card and it worked flawlessly.
Next in line is the hard drive, Combo drive to be either swapped for a Blueray but most probably for a super drive. Memory is going to go to 2 GB, I do realize this is meant to work only with 2x512 but I've read it is quite possible to go with 2x1GB. These upgrades are not the ones that bother me.
I am really, and I mean really tangled in the bluetooth capability. From here onwards everything is related to internal installation. I do have an external BT dongle, don't like the way it sticks. I know there are two parts that I need, a bluetooth module and a bluetooth antenna (or aerial). What is stopping me from purchasing the required components is the absence of any information as to model numbers, compatibility, interchangeability etc.
I've done quite a bit of research and came up with the following:
1. Bluetooth module (board if you like) model number - Apple part number [922-6201|http://www.welovemacs.com/9226871.html] and I think that was the original that would have been the built-to-order part number. I do think it was also only a BT 1.1 version.
2. Bluetooth antenna (or aerial) model number - [922-6402|http://www.welovemacs.com/9226402.html].
I believe the board could be exchanged with Apple part numbers 922-6530, 922-6876, 922-6871 as stated in the link above but am not positive as i do not know the dimensions of those boards and whether they would fit. Quite possibly yes but...
I could not find anything else on the antenna. Apple's Service Source manual does not list any information at all about the bluetooth module, antenna etc.
My questions are: What part number bluetooth module and antenna would fit my eMac?
More importantly: Can I purchase a newer 2.0+EDR bluetooth module and fit it inside my eMac (part number???). Anyone ever installed an internal bluetooth for an eMac? Pictures, link, site?
Thank you very much in advance.
Regards.
Welcome, Yonko!
I'm not up on blue rays or teeth, but there are some more basic things to figure out before getting that far.
First, find out if your eMac falls under this repair extension program. If it does, consider getting it inspected before dropping a whole bunch of money.
Second, any internal optical drive MUST be Mac-bootable. Review user reports here:
http://forums.xlr8yourmac.com/drivedb/search.drivedb.lasso
I'd bump the RAM to at least 512MB--more is better. Your eMac takes PC2700 RAM.
Similar Messages
-
SOMEONE PLEASE HELP ME WITH UPGRADING TO ITUNES LATEST VERISON?!?!
I'm trying to upgrade itunes 7.0.2 but it wont let me I wait for hours but it doesnt do anything all it does is just stay there and i spent a week just trying to upgrade it but i'm out of ideas I have an itunes gift card and i cant download music until i upgrade it but i can't even. I dont know what to do anymore can some please help and tell me how i can fix my problem?!?!
Windows XPmsr291,
Additional information would be most helpful.
- What version OS are you running?
- If necessary, do you have any CDs to install MacOS system software if necessary?
- What model iBook (called the "clamshell") or powerbook do you have?
http://docs.info.apple.com/article.html?artnum=88039
http://docs.info.apple.com/article.html?artnum=24604 -
Please, help!
After upgrading to Yosemite, my dock has disappeared, along with the dashboard and the wallpaper! Can anyone help? I'm using a MacBook Pro, retina, bought it last year.
ThanksHave you been trying to download from the app store? Did you get a message?
As a suggestion, you might go to an Apple store (genius bar appointment) for help. As far as I know, there should be no charge.
Barry -
Please help me with the proper query for the below problem
Hi,
I have a table RATE which have two columns RT_DATE (date) and RATES(number).
This table have following data.
RT_DATE
RATES
1-JAN-2007
7
2-MAR-2008
7.25
5-JAN-2009
8
8-NOV-2009
8.5
9-JUN-2010
9
I wanted to get the rate of interest on 8-DEC-2009.
Output will be 8.5 as this given date is in between 8-NOV-2009 and 9-JUN-2010. Could you please help me with proper query?
Regards,
Aparna SHi,
That sounds like a job for the LAST function:
SELECT MIN (rates) KEEP (DENSE_RANK LAST ORDER BY rt_date) AS eff_rate
FROM rate
WHERE rt_date < 1 + DATE '2009-12-08'
MIN above means that, in case of a tie (that is, 2 or more rows with the exact same latest rt_date) the lowest rates from that latest rt_date will be returned. In rt_date is unique, then it doesn't matter if you use MIN or MAX, but syntax demands that you use some aggregate function there.
I hope this answers your question.
If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for your sample data, and also post the results you want from that data.
Point out where the statement above is getting the wrong results, and explain, using specific examples, how you get the right results from the given data in those places.
Always say which version of Oracle you're using (e.g., 11.2.0.2.0).
See the forum FAQ: https://forums.oracle.com/message/9362002#9362002 -
Please help me with user-exits or baids for TCode : FOE2 & FOE1
Hi Experts
Please help me with user-exits or baids for TCode : FOE2 & FOE1.
I found these but not picking values from VIMI01,VIOB03 and VIOB41.
User-exits
FVCH0001 CH-specific enhancements: Esp. POR
ISRE0001 Determine bank procedure account no.
ISRE0002 IPD reporting data retrieval
Business Add-in
FVD_HANDLE_FORMULA Processing of Condition FormulasHi,
ASk your basis regarding the CI_CSKB table active issue, and first of all i dont see any table with the name CI_CSKB.
And check this exit-COOMKS03 whether it works for your screen exits.
Cheers!!
VEnk@
Edited by: Venkat Reddy on Nov 4, 2008 5:59 PM -
I recently upgraded to IOS 10.9.5 and now I can't export anything from final cut Pro X. Could somebody please help me with this?
SSign in to the App Store using the Apple ID that was used to purchase the software.
-
Could you please help me with the problem. I have macbook with retina with mac os 10.7.4 ann want to update it to mac os 10.7.5. I had been waiting for 2 hours to do it and had tried 3 times but it appeared that it was impossible. What should I do?
You can download the standalone updates:
OS X Lion Update 10.7.5 (Client Combo)
OS X Lion 10.7.5 Supplemental Update -
Hi, last month i bought the ms bundle knowing it would help me with my office works..but didnt seem to work as i thought please help me with this, i didnt pay 51 singapore dollar for nothing please get me back asap
Does the iPod connect to other networks?
If you restored to factory settings/new iPod and still does not connect to any network that indicates a hardware problem.
If you only can't connect to your network that indicates a problem with your network.
Make an appointment at the Genius Bar of an Apple store..
Apple Retail Store - Genius Bar -
hey! i have a serious problem coming up which is that i am asked to enter my billing info even for free apps. why should i pay for apps which are free? please help me with this problem! and in the billing info there is pop-up box saying i have accessed my account from didfferent computer but no i have been doing it from the same pc. please help me out.
Tap Settings > General > International. Make sure the Region Format is correct.
As for your Apple ID. Tap Settings > Store > Apple ID > iForgot
Resetting your Apple ID may help.
Congrats on your new iPad !!! -
I have unlocked my iphone and when tried to upgrade it, i got an error, so i restored it.But i was not able to activate my iphone 3gs now...it is showing a message like ' sim card not found'..please help me with this regard
Try popping out the SIM card and turn off the phone.
Pop in the SIM card once again and turn on the phone, make sure that the SIM card is placed and seated perfectly in the tray!
Tell me how did you unlock your phone!? -
Please help me with portfolio.I am new in graphic design.I need portfolio done immediately soon as possible otherwise my design advisor will not let me register for fall. I need 15 or 10 artworks to show.Please help me.
Farooq,
If you look at the first one, you should be able to align quite easily as follows, View>Smart Guides being your friends:
1a) ClickDrag the top flower with the Selection Tool (black arrow) so it is clear of the pointy part;
1b) Click an empty spot on the Artboard to deselect, then ClickDrag the top flower by its bottom Anchor Point (Smart Guides say anchor when you are close enough to grab it) down to snap to the top Anchor Point on the pointy part (Smart Guides say anchor when you are close enough);
1c) Do the same for the boroom flower.
If you look at the third one, to get the triangles and the hexagon sized and aligned precisely, you may, creating them with stroke and no fill:
3a) Click with the Polygon Tool and select a suitable/chosen Radius and 6 Sides, then Object>Transform>Rotate by 30 degrees (or use the Rotate option in the Transform palette), you may Object>Transform>Reset Bounding Box to have it look nicer;
3b) Click with the Polygon Tool and select the same Radius and 3 sides, then deselect and ClickDrag the top Anchor Point to snap to the top Anchor Point of the hexagon;
3c) Object>Transform>Rotate by 180 degrees clicking Copy, deselect, and ClickDrag the bottom Anchor Point to snap to the bottomAnchor Point of the hexagon;
3d) Select all and Ctrl/Cmd+G to Group (for alignment purposes, you will know why if you try without grouping, see below).
To create full symmetry, you may use circles rather than almost circular ellipses; you may:
3d) Click with the Ellipse Tool and select a suitable/chosen Width = height;
3e) Object>Transform>Move a copy vertically by the Height (= Width) twice (or you may Ctrl/Cmd+D to repeat), to get three circles over one another with no gaps;
3f) Select the topmost and bottommost ones and Object>Transform>Rotate a copy by 120 degrees twice, to have all the seven circles precisley touching one another; you may Group them, but it is not necessary.
To have everything aligned, just:
3g) Select everything and click Vertical Align Center and Horizontal Align Center in the Align palette; you may click the pointy group or the circles ojnce more before aligning if you want to keep it in place (that will make it the key object that the other set is aligned to).
These ways may also help you further.
Edit: About half an hour after midnight here. High time to attend to other duties, before the sun is up. -
please help me with msi installer file for 11.6.8.* as this is our standard version which we use for all machines in our organization
arai-c wrote:
I have full version of this software but I am not able to install it silently because it always gives Google toolbar pop up which We dont required
arai-c wrote:
the problem is we dont have msi file for 10.6.*.* and hence I am not able to create package for it
I don't understand; two days ago you wrote that you have it, now you don't...?
If you don't have it, then why not deploy the current version 12.1.3.153 - I don't see the point of installing an old, unsecure software version. -
Can you please help me with validation logic for Events in Table maintenance generator
Can you please help me with validation logic for Events in Table maintenance generator,i.e if i enter record in 1st internal table then automatically 2nd internal table should be updated.
Hi Glen Anthony,
Thanks for replay,
I used foreign key relationship between those 2 internal tables....
I used event 05: When creating a new entry. I want to know the custom logic by which my 2nd Internal table gets automatically updated when i update my 1st Internal table
Thanks Glen. -
Dear Apple,please help me.the glitch and lags on games made me sad beause i am too love with my 4s. Why iOS 7 really made me sad...please help me.im beg for you.
www.apple.com/feedback/iphone.html
No one from Apple is listening on these forums. -
Is there any link between oe_order_headers_all and hz_cust_accounts tables. I need to find the cust_account_id for some order_number. Please help me with this
you can link
OOH.invoice_to_org_id=CUST.cust_account_id -- invoice customer
OOH.sold_to_org_id=CUST.cust_account_id -- sold to customer
OOH.ship_to_org_id=CUST.cust_account_id -- ship to customer
Maybe you are looking for
-
DVI to Video Adapter- Audio Compatibile?
Hey I have two questions about the DVI to Video Adapter. I want to use it to connect my MacBook Pro to a TV in order to watch DVDs. Now my question is does this wire only transfer video, or does it also transfer audio. Will it get the movie on the sc
-
File to RFC Scenario - Not working with AAE
I have a File to RFC Scenario (calling RFC /POSDW/CREATE_TRANSACTIONS_EXT) using AAE but it is failing with following error in PI . MP: exception caught with cause com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.ada
-
Finding flash movies (swf?) in cache
Dear all, Is it possible to find flash movies that you have viewed in the cache (or anywhere else for that matter?). Furthermore, is it possible to move them to a place where one can view them when offline? Cheers George
-
What's this I hear about Gmail and the iPhone?
I have a gmail account with my iphone. I opened up a thread a few days ago saying something about gmail and the iphone (I didn't get to read the thread though) making it sound like the emails would get to my phone faster or something. Anyone know wha
-
I have sent this email and talked with nokia care and had no luck. Maybe in this forum I have a better chance. ----email to nokia------- I am a dedicated Nokia phone user and have been from the nokia 2110 till now (N80). I do have to say that I belie