Please Help mee!!
Friends,
When i tried to establish HS connectivity from oracle 8i with MSaccess
i get one error.
ERROR at line 1:
ORA-28509: unable to establish a connection to non-Oracle system
ORA-02063: preceding line from LINK1
The steps i did,
1. Create initmsaccess.ora in orahome/hs/admin directory
HS_FDS_CONNECT_INFO = MSACCESS -> ODBC Name. I tested in Microsoft OBBC. Its Working.
HS_FDS_TRACE_LEVEL = DEBUG
2. Add following entries in listener.ora ->/orahome/network/admin directory
SID_LIST_TRACKMAN =
(SID_LIST=
(SID_DESC=
(SID_NAME=msaccess)
(ORACLE_HOME=E:\oracle\ora81)
(PROGRAM=HSODBC))
(SID_DESC=....)
TRACKMAN =
(DESCRIPTION_LIST=
(DESCRIPTION=
(ADDRESS_LIST=
(ADDRESS=(PROTOCOL = TCP)(HOST = hostname1)(PORT = 1521))
(ADDRESS=(PROTOCOL=ipc)(KEY=PNPKEY))
3. Add some entries in tnsnames.ora file like
msaccess =
(DESCRIPTION=
(ADDRESS=(PROTOCOL = TCP)(HOST = hostname1)(PORT = 1521))
(CONNECT_DATA=(SID=msaccess))
(HS=OK)
4. In lsnrctl, stop and start the listener. it displayed successfully .
5. Issue tnsping for both database. It displayed
attempting to contact (Address=(..........) OK (200msec)
6. I created a database link
create database link link1 using 'msaccess'
7. when i issue select command im getting this error.
select * from "table1"@link1
ERROR at line 1:
ORA-28509: unable to establish a connection to non-Oracle system
ORA-02063: preceding line from LINK1
I tried same steps in one oracle 9i system. It working properly. But my requirement from oracle 8i.
Please help me.
Thanks In advance
James
James,
I suspect that you do not have Hetrogeneous Services installed - it is included by default on Oracle 9i. If you do not have the database view SYS.HS_FDS_CLASS, then you need to run 'caths.sql'.
Takmeister
Similar Messages
-
Please help mee!! my iphone 4 FREEZE..!!
Please help mee!! my iphone 4 is freeze on apple logo..i holded the home button and the lock button , and it turns off,but when i try to start it again, it freeze again..please help me.
http://support.apple.com/kb/HT1808
-
HT5621 please tell me my ipone activation icloud id please contect meeee please help mee sir kindly
hello
sir hoe are you
im fine
sir .please help me my ipone is activetion problem because activate to icloud id i don't have icloud id because i am a second user use to ipone4 sir please help me to break to icloud id or master icloud id to activate my ipone4
contect me
thanks sir please contect meee
<Personal Information Edited by Host>Unfortunately, Apple does not listen or participate in these forums, they are only for user-to-user.
Your post is difficult to understand. Are you saying you do not have an icloud ID? If you have one, but the phone is currently connected using a different ID, do the following:
Go to Settings>icloud, scroll to bottom of screen and tap Delete Account. Then log in using a different ID. -
When i try to update my IPod it says- "Songs on the IPod cannot be updated becuase all of the playlists selected for updating no longer exist" but all my music is still in my Itunes and on my Playlist but not on my IPod??????
Please help.. thanks!it could be a problem with your usb...try unplugging all other removable disks.
-
Synicing apps and music please help mee!
hello all,
this all started a few months back i cant rember how many but i found out i could shop on my ipod for apps and music etc.. anyway i hardly ever used the pc for anything even charging cause i have a wall charger in my room so i kinda have gotten used to not shopping on the itunes store on the pc. well a few days ago i decided i better stop being lazy so i pluged in my ipod touch to shop on itunes and well i asked a question and it got anwsered so i transfered my apps and music stuff into the pc so i can shop well when i got to the apps part of my itunes menu on my ipod info it has apps and stuff underneath it faded? so theres this little tick box thing beside it so i click on it and this is what it came up with (i copied it all out everything you see is what it actually said)
"are you sure you want to sync apps? all existing apps and their data on the ipod "mins ipod" will be replaced with the apps from this itunes library"
i dont want to click on it before i ask people so my question is does anyone know what i should do?
please help me!Syncing to a new computer or iTunes will erase the content of your device and replace it with the content of that iTunes.
To make sure that your settings, data and apps are transferred to your computer, back up manually and restore from that backup afterwards. Here's how to do.
Make sure your new computer is authorized in iTunes with the same account. Disable autosync in itunes, connect your ipod, right click on it in the device list and choose backup.
This will save data, pictures and settings to itunes. See what's included in this backup here: http://support.apple.com/kb/HT1766
Transfer your purchases the same way to copy all apps and bought media from the Store to your computer.
Set up at least one contact and event on your computer to be able the merge your calendars and contacts after your ipod got wiped during the first sync.
The rest of the data can be restored from the backup you made.
Restoring: http://support.apple.com/kb/HT1414
Music is one way only, from the computer to your device, unless you bought the songs in itunes and transferred your purchases.
There is 3rd party software out there, but not supported by Apple, see this thread: http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0 -
My iPhone won't restore. Please help meee :(
I'm restoring my iPhone 'cause the connect to itunes mode just wont go away and it wont turn on but I cant do it even though I have the latest version of itunes(11.0.2) installed in my pc. So here's what really happened, one of my friends accidentally restored my iphone back to 4.1(I had 4.2.1 before). So when I was finally trying to sync it from my last backup, itunes said that I needed to update my software in order to sync my backup, but I failed to do it 'cause my internet's temporarily gone. Then after that itunes said that i need to restore my iphone(again). But it won't restore, it always stops in the middle of the process. And that connect to iTunes mode never goes away now. Please help me I really really need to use my phone asap. Sorry if it was long too.
bona dea wrote:
one of my friends accidentally restored my iphone back to 4.1(I had 4.2.1 before).
As Lawrence pointed out, that is impossible to do accidentally.
Downgrading constitutes an unauthorized modification to your phone. A "hack".
Tell your friend to replace the phone. You can not get help here. -
IPhone disabled please connect to iTunes. Please help mee
Hello
My son has typed in my passcode wrong on my iPhone 5 and it says 'iPhone disabled please connect to iTunes'
I had rung O2, and they said that the only thing they can do is do a restore on the phone but then everything will be deleted
I'm not bothered about the apps getting deleted, it's the photos and videos I am most worried about because they are of my 4 month old daughter since birth and these are the only photos that I have of her. I have only sent around 20 photos to family and friends so if I lose all these photos on my phone then I will only have 20. There are over 2000 pictures of her on my phone so I really really need to get them back
I don't have iTunes, I have never downloaded it or anything. I have always taken my pictures off just by plugging my phone into the computer, going to My Computer and copy and pasting them like that but I have not done this in 2 months and there are so many photos and videos that will be lost.
I downloaded iTunes, logged in using my email and password but every time I connect my phone it keeps saying for me to put my password in on the phone but the numbers aren't on the phone screen.
Is there any way I can get my photos back?
Can Apple get them back for me?
Please helpThere is no way to get your photos back if you didn't save them to your computer, or back up your iPhone to your computer, or back up your iPhone to iCloud, or enable PhotoStream for your iPhone, or upload them to FaceBook or Picasa or DropBox or Box or Flickr or Shutterfly. In other words, there are at least a dozen ways you can preserve photos, and if you didn't do any of them they are lost.
One reason to sync to iTunes is iTunes will "remember" your phone, so if you ever lose your passcode you can just Restore using iTunes and it will remove the passcode AND restore your most recent backup. -
Ipod nano is messed up please help mee
when i go to update my ipod and go to click on the songs in the ipod window, i cant.
when i try it with my shuffle, it works fine, i have to right click on my nano icon in the list on the list on the leftto update it. i cant even click on the music when im looking at the window with the songs on my ipod up
please help me
windows laptop Windows XPIf the iPod is set to automatically update, the songs are greyed out (because automatically updating means the songs in your library are the same ones on the iPod (for the most part)). Anything you would want to do with the song would have to be done in your iTunes library.
If you set the iPod to manually update, this is not the case, because the iPod and iTunes can have different songs.
Although there are ways to automatically update and have different songs, automatically updating is mainly for having the same, or similar libraries, on both your iPod and iTunes (so you can't access the songs on the iPod through the computer because they should be on the computer).
This is the way the transfer modes work. If the iPod is set to automatically update, the songs will be greyed out. Not much you can do.
btabz -
6 installation needs at least 50% charger ! Please help mee!!
Hello everyone .
I am trying to install IOS 6! When I was installing it in the last minute where the iPod was going to finish the IOS 6 update it sends a message saying your iPod touch needs at least to be 50% charged so then it deleted all the installation then I tried again it says unable to verify update IOS 6 verifying is no longer connected to Internet but I am connected to Internet ! What that means !???
SOMEONE HELP ME PLEASE PLEASEactually i know all your answers but thank you for trying to help me
-
My internet randomly stopped working? Please help mee!
Right okay, I got my BB last month some time, and it's been perfect.
But today i came into sixthform and my internet won't work.. and at first i thought it was because i was in school, but i always just browsed whilst i was a school and everyone elses is still working.
I can't get on blackberry messenger..
and i'm on a laptop with wireless internet so i know there isn't anything wrong with the internet itself.
I just went on the browser and tried to go on google and i got this message "Unable to connect to the internet, please try again later. If the problem persists please contact your service provider."
I have the facebook application too, and that isn't working either..
Any ideas?
I will really appreciate it x1. Options > Advanced > Host Routing Table > Menu > Register.
2. Resend your service books from your carrier BIS site.
From your handheld device: http://www.blackberry.com/btsc/KB15402
From your desktop PC: http://www.blackberry.com/btsc/KB02830
3. With the BlackBerry device powered ON, remove the battery a few seconds and then reinsert the battery to reboot
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Error while working with OracleApps Adapter please help mee
<bindingFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="code"><code>1086</code>
</part><part name="summary"><summary>file:/F:/product/10.1.3.1/OracleAS_2/bpel/domains/test/tmp/.bpel_RepairOrder_1.0_4bac0e828ef344d37656722b167615db.tmp/CreateRepairOrder.wsdl [ CreateRepairOrder_ptt::CreateRepairOrder(InputParameters,OutputParameters) ] - WSIF JCA Execute of operation 'CreateRepairOrder' failed due to: Error while trying to prepare and execute an API.
An error occurred while preparing and executing the APPS.XX_BPEL_CREATEREPAIRORDER.CSD_REPAIRS_PUB$CREATE_REPAIR API. Cause: java.sql.SQLException: ORA-01086: savepoint 'CREATE_REPAIR_ORDER_PUB' never established
ORA-06512: at "APPS.JTF_PLSQL_API", line 65
ORA-06512: at "APPS.CSD_REPAIRS_PUB", line 144
ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: at "APPS.XX_BPEL_CREATEREPAIRORDER", line 160
ORA-06512: at line 1
[Caused by: ORA-01086: savepoint 'CREATE_REPAIR_ORDER_PUB' never established
ORA-06512: at "APPS.JTF_PLSQL_API", line 65
ORA-06512: at "APPS.CSD_REPAIRS_PUB", line 144
ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: at "APPS.XX_BPEL_CREATEREPAIRORDER", line 160
ORA-06512: at line 1
; nested exception is:
ORABPEL-11811
Error while trying to prepare and execute an API.
An error occurred while preparing and executing the APPS.XX_BPEL_CREATEREPAIRORDER.CSD_REPAIRS_PUB$CREATE_REPAIR API. Cause: java.sql.SQLException: ORA-01086: savepoint 'CREATE_REPAIR_ORDER_PUB' never established
ORA-06512: at "APPS.JTF_PLSQL_API", line 65
ORA-06512: at "APPS.CSD_REPAIRS_PUB", line 144
ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: at "APPS.XX_BPEL_CREATEREPAIRORDER", line 160
ORA-06512: at line 1
[Caused by: ORA-01086: savepoint 'CREATE_REPAIR_ORDER_PUB' never established
ORA-06512: at "APPS.JTF_PLSQL_API", line 65
ORA-06512: at "APPS.CSD_REPAIRS_PUB", line 144
ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: at "APPS.XX_BPEL_CREATEREPAIRORDER", line 160
ORA-06512: at line 1
Check to ensure that the API is defined in the database and that the parameters match the signature of the API. Contact oracle support if error is not fixable.
</summary>
</part><part name="detail"><detail>
Internal Exception: java.sql.SQLException: ORA-01086: savepoint 'CREATE_REPAIR_ORDER_PUB' never established
ORA-06512: at "APPS.JTF_PLSQL_API", line 65
ORA-06512: at "APPS.CSD_REPAIRS_PUB", line 144
ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: at "APPS.XX_BPEL_CREATEREPAIRORDER", line 160
ORA-06512: at line 1
Error Code: 1086</detail>
</part></bindingFault>create or replace
PACKAGE BODY CSD_REPAIRS_PUB as
/* $Header: csdpdrab.pls 120.12 2006/09/05 11:57:18 vparvath noship $ */
* This is the public interface for the Depot Repair API. It allows
* execution of various Depot Repair APIs.
* @rep:scope public
* @rep:product CSD
* @rep:displayname Depot Repair APIs
* @rep:lifecycle active
* @rep:category BUSINESS_ENTITY CSD_REPAIR_ORDER
-- Package name : CSD_REPAIRS_PUB
-- Purpose : This package contains the public APIs for creating
-- and updating repair orders.
-- History :
-- Version Date Name Description
-- 115.0 11/17/99 pkdas Created.
-- 115.1 12/18/99 pkdas
-- 115.2 01/04/00 pkdas
-- 115.3 02/09/00 pkdas Added p_REPAIR_LINE_ID as IN parameter in the
-- Create_Repairs procedure.
-- Added p_REPAIR_NUMBER as OUT parameter in the
-- Create_Repairs procedure.
-- 115.4 02/29/00 pkdas Changed the procedure name
-- Create_Repairs -> Create_Repair_Order
-- Update_Repairs -> Update_Repair_Order
-- Added p_validation_level to Create_Repair_Order and
-- Update_Repair_Order
-- NOTE :
G_PKG_NAME CONSTANT VARCHAR2(30) := 'CSD_REPAIRS_PUB';
G_FILE_NAME CONSTANT VARCHAR2(12) := 'csdpdrab.pls';
g_debug NUMBER := csd_gen_utility_pvt.g_debug_level;
* Create Repair Order
* @param P_Api_Version_Number api version number
* @param P_Init_Msg_List initial the message stack, default to false
* @param P_Commit to decide whether to commit the transaction or not, default to false
* @param p_validation_level validation level, default to full level
* @param p_repair_line_id repair line id is unique id
* @param P_REPLN_Rec repiar line record
* @param p_create_default_logistics flag to create logistics lines, default to N
* @param X_REPAIR_LINE_ID repair line id of the created repair order
* @param X_REPAIR_NUMBER repair number of the created repair order which display on Depot UI
* @param X_Return_Status return status
* @param X_Msg_Count return message count
* @param X_Msg_Data return message data
* @rep:scope public
* @rep:lifecycle active
* @rep:displayname Create Repair Order
PROCEDURE Create_Repair_Order(P_Api_Version_Number IN NUMBER,
P_Init_Msg_List IN VARCHAR2 := FND_API.G_FALSE,
P_Commit IN VARCHAR2 := FND_API.G_FALSE,
p_validation_level IN NUMBER := FND_API.G_VALID_LEVEL_FULL,
P_REPAIR_LINE_ID IN NUMBER := FND_API.G_MISS_NUM,
P_REPLN_Rec IN CSD_REPAIRS_PUB.REPLN_Rec_Type,
p_create_default_logistics IN VARCHAR2 := 'N',
X_REPAIR_LINE_ID OUT NOCOPY NUMBER,
X_REPAIR_NUMBER OUT NOCOPY VARCHAR2,
X_Return_Status OUT NOCOPY VARCHAR2,
X_Msg_Count OUT NOCOPY NUMBER,
X_Msg_Data OUT NOCOPY VARCHAR2) IS
l_api_name CONSTANT VARCHAR2(30) := 'Create_Repair_Order';
l_api_version_number CONSTANT NUMBER := 1.0;
BEGIN
-- Standard Start of API savepoint
SAVEPOINT CREATE_REPAIR_ORDER_PUB;
-- Standard call to check for call compatibility.
IF NOT FND_API.Compatible_API_Call(l_api_version_number,
p_api_version_number,
l_api_name,
G_PKG_NAME)
THEN
RAISE FND_API.G_EXC_UNEXPECTED_ERROR;
END IF;
-- Initialize message list if p_init_msg_list is set to TRUE.
IF FND_API.to_Boolean(p_init_msg_list)
THEN
FND_MSG_PUB.initialize;
END IF;
-- Initialize API return status to success
x_return_status := FND_API.G_RET_STS_SUCCESS;
-- API body
CSD_REPAIRS_PVT.Create_Repair_Order(P_Api_Version_Number => 1.0,
P_Init_Msg_List => p_init_msg_list,
P_Commit => p_commit,
P_Validation_Level => p_validation_level,
P_REPAIR_LINE_ID => p_REPAIR_LINE_ID,
P_REPLN_Rec => p_REPLN_Rec,
X_REPAIR_LINE_ID => x_REPAIR_LINE_ID,
X_REPAIR_NUMBER => x_REPAIR_NUMBER,
X_Return_Status => x_return_status,
X_Msg_Count => x_msg_count,
X_Msg_Data => x_msg_data);
-- Check return status from the above procedure call
IF not (x_return_status = FND_API.G_RET_STS_SUCCESS)
then
ROLLBACK TO CREATE_REPAIR_ORDER_PUB;
return;
END IF;
IF (P_CREATE_DEFAULT_LOGISTICS = 'Y') THEN
CSD_LOGISTICS_PVT.Create_Default_Logistics
( p_api_version => P_Api_Version_Number,
p_commit => P_Commit,
p_init_msg_list => P_Init_Msg_List,
p_validation_level => p_validation_level,
p_repair_line_id => P_REPAIR_LINE_ID,
x_return_status => X_Return_Status,
x_msg_count => X_Msg_Count,
x_msg_data => X_Msg_Data
IF NOT(x_return_status = FND_API.G_RET_STS_SUCCESS) THEN
RAISE FND_API.G_EXC_ERROR;
END IF;
END IF;
-- End of API body.
-- Standard check for p_commit
IF FND_API.to_Boolean(p_commit)
THEN
COMMIT WORK;
END IF;
-- Standard call to get message count and if count is 1, get message info.
FND_MSG_PUB.Count_And_Get(p_count => x_msg_count,
p_data => x_msg_data);
EXCEPTION
WHEN FND_API.G_EXC_ERROR THEN
JTF_PLSQL_API.HANDLE_EXCEPTIONS(P_API_NAME => L_API_NAME,-------------------------------line 144 error
P_PKG_NAME => G_PKG_NAME,
P_EXCEPTION_LEVEL => FND_MSG_PUB.G_MSG_LVL_ERROR,
P_PACKAGE_TYPE => JTF_PLSQL_API.G_PUB,
X_MSG_COUNT => X_MSG_COUNT,
X_MSG_DATA => X_MSG_DATA,
X_RETURN_STATUS => X_RETURN_STATUS);
-- RAISE;
WHEN FND_API.G_EXC_UNEXPECTED_ERROR THEN
JTF_PLSQL_API.HANDLE_EXCEPTIONS(P_API_NAME => L_API_NAME,
P_PKG_NAME => G_PKG_NAME,
P_EXCEPTION_LEVEL => FND_MSG_PUB.G_MSG_LVL_UNEXP_ERROR,
P_PACKAGE_TYPE => JTF_PLSQL_API.G_PUB,
X_MSG_COUNT => X_MSG_COUNT,
X_MSG_DATA => X_MSG_DATA,
X_RETURN_STATUS => X_RETURN_STATUS);
-- RAISE;
WHEN OTHERS THEN
JTF_PLSQL_API.HANDLE_EXCEPTIONS(P_API_NAME => L_API_NAME,
P_PKG_NAME => G_PKG_NAME,
P_EXCEPTION_LEVEL => JTF_PLSQL_API.G_EXC_OTHERS,
P_PACKAGE_TYPE => JTF_PLSQL_API.G_PUB,
X_MSG_COUNT => X_MSG_COUNT,
X_MSG_DATA => X_MSG_DATA,
X_RETURN_STATUS => X_RETURN_STATUS);
-- RAISE;
End Create_Repair_Order;
PROCEDURE Update_Repair_Order(P_Api_Version_Number IN NUMBER,
P_Init_Msg_List IN VARCHAR2 := FND_API.G_FALSE,
P_Commit IN VARCHAR2 := FND_API.G_FALSE,
p_validation_level IN NUMBER := FND_API.G_VALID_LEVEL_FULL,
p_REPAIR_LINE_ID IN NUMBER,
P_REPLN_Rec IN OUT NOCOPY CSD_REPAIRS_PUB.REPLN_Rec_Type,
X_Return_Status OUT NOCOPY VARCHAR2,
X_Msg_Count OUT NOCOPY NUMBER,
X_Msg_Data OUT NOCOPY VARCHAR2) IS
l_api_name CONSTANT VARCHAR2(30) := 'Update_Repair_Order';
l_api_version_number CONSTANT NUMBER := 1.0;
BEGIN
-- Standard Start of API savepoint
SAVEPOINT UPDATE_REPAIR_ORDER_PUB;
-- Standard call to check for call compatibility.
IF NOT FND_API.Compatible_API_Call(l_api_version_number,
p_api_version_number,
l_api_name,
G_PKG_NAME)
THEN
RAISE FND_API.G_EXC_UNEXPECTED_ERROR;
END IF;
-- Initialize message list if p_init_msg_list is set to TRUE.
IF FND_API.to_Boolean(p_init_msg_list)
THEN
FND_MSG_PUB.initialize;
END IF;
-- Initialize API return status to SUCCESS
x_return_status := FND_API.G_RET_STS_SUCCESS;
-- API body
CSD_repairs_PVT.Update_Repair_Order(P_Api_Version_Number => 1.0,
P_Init_Msg_List => p_init_msg_list,
P_Commit => p_commit,
P_Validation_Level => p_validation_level,
p_REPAIR_LINE_ID => p_repair_line_id,
P_REPLN_Rec => p_REPLN_Rec,
X_Return_Status => x_return_status,
X_Msg_Count => x_msg_count,
X_Msg_Data => x_msg_data);
-- Check return status from the above procedure call
IF not (x_return_status = FND_API.G_RET_STS_SUCCESS)
then
ROLLBACK TO UPDATE_REPAIR_ORDER_PUB;
return;
END IF;
-- End of API body.
-- Standard check for p_commit
IF FND_API.to_Boolean(p_commit)
THEN
COMMIT WORK;
END IF;
-- Standard call to get message count and if count is 1, get message info.
FND_MSG_PUB.Count_And_Get(p_count => x_msg_count,
p_data => x_msg_data);
EXCEPTION
WHEN FND_API.G_EXC_ERROR THEN
JTF_PLSQL_API.HANDLE_EXCEPTIONS(P_API_NAME => L_API_NAME,
P_PKG_NAME => G_PKG_NAME,
P_EXCEPTION_LEVEL => FND_MSG_PUB.G_MSG_LVL_ERROR,
P_PACKAGE_TYPE => JTF_PLSQL_API.G_PUB,
X_MSG_COUNT => X_MSG_COUNT,
X_MSG_DATA => X_MSG_DATA,
X_RETURN_STATUS => X_RETURN_STATUS);
-- RAISE;
WHEN FND_API.G_EXC_UNEXPECTED_ERROR THEN
JTF_PLSQL_API.HANDLE_EXCEPTIONS(P_API_NAME => L_API_NAME,
P_PKG_NAME => G_PKG_NAME,
P_EXCEPTION_LEVEL => FND_MSG_PUB.G_MSG_LVL_UNEXP_ERROR,
P_PACKAGE_TYPE => JTF_PLSQL_API.G_PUB,
X_MSG_COUNT => X_MSG_COUNT,
X_MSG_DATA => X_MSG_DATA,
X_RETURN_STATUS => X_RETURN_STATUS);
-- RAISE;
WHEN OTHERS THEN
JTF_PLSQL_API.HANDLE_EXCEPTIONS(P_API_NAME => L_API_NAME,
P_PKG_NAME => G_PKG_NAME,
P_EXCEPTION_LEVEL => JTF_PLSQL_API.G_EXC_OTHERS,
P_PACKAGE_TYPE => JTF_PLSQL_API.G_PUB,
X_MSG_COUNT => X_MSG_COUNT,
X_MSG_DATA => X_MSG_DATA,
X_RETURN_STATUS => X_RETURN_STATUS);
-- RAISE;
End Update_Repair_Order;
-- R12 Development Begin
* Update Repair Order Status
* @param P_Api_Version api version number
* @param P_Commit to decide whether to commit the transaction or not, default to false
* @param P_Init_Msg_List initial the message stack, default to false
* @param X_Return_Status return status
* @param X_Msg_Count return message count
* @param X_Msg_Data return message data
* @param P_Repair_status_rec repair status attributes record.
* @param P_status_upd_control_rec repair status record control flags.
* @param X_OBJECT_VERSION_NUMBER
* @rep:scope public
* @rep:lifecycle active
* @rep:displayname Update Repair Order Status
PROCEDURE Update_Ro_Status(P_Api_Version IN NUMBER,
P_Commit IN VARCHAR2,
P_Init_Msg_List IN VARCHAR2,
X_Return_Status OUT NOCOPY VARCHAR2,
X_Msg_Count OUT NOCOPY NUMBER,
X_Msg_Data OUT NOCOPY VARCHAR2,
P_REPAIR_STATUS_Rec IN REPAIR_STATUS_REC_TYPE,
P_STATUS_UPD_CONTROL_REC IN STATUS_UPD_CONTROL_REC_TYPE,
X_OBJECT_VERSION_NUMBER OUT NOCOPY NUMBER) IS
l_api_name CONSTANT VARCHAR2(30) := 'Update_Ro_Status';
l_api_version_number CONSTANT NUMBER := 1.0;
l_msg_data varchar2(2000);
l_msg_index_out NUMBER;
BEGIN
-- Standard Start of API savepoint
SAVEPOINT UPDATE_RO_STATUS_PUB;
-- Initialize message list if p_init_msg_list is set to TRUE.
IF FND_API.to_Boolean(p_init_msg_list)
THEN
FND_MSG_PUB.initialize;
END IF;
-- Initialize API return status to success
x_return_status := FND_API.G_RET_STS_SUCCESS;
-- API body
CSD_REPAIRS_PVT.UPDATE_RO_STATUS(P_Api_Version => p_api_version,
P_Commit => p_commit,
P_Init_Msg_List => p_init_msg_list,
P_Validation_Level => FND_API.G_VALID_LEVEL_FULL,
X_Return_Status => x_return_status,
X_Msg_Count => x_msg_count,
X_Msg_Data => x_msg_data,
P_REPAIR_STATUS_REC => p_repair_status_rec,
P_STATUS_CONTROL_REC => p_status_upd_control_rec,
X_OBJECT_VERSION_NUMBER => x_object_Version_number);
-- Check return status from the above procedure call
IF not (x_return_status = FND_API.G_RET_STS_SUCCESS)
then
ROLLBACK TO UPDATE_RO_STATUS_PUB;
return;
END IF;
-- End of API body.
-- Standard check for p_commit
IF FND_API.to_Boolean(p_commit)
THEN
COMMIT WORK;
END IF;
-- Standard call to get message count and if count is 1, get message info.
FND_MSG_PUB.Count_And_Get(p_count => x_msg_count,
p_data => x_msg_data);
if(x_msg_count > 1) then
FOR l_index IN 1 .. x_msg_count
LOOP
fnd_msg_pub.get (p_msg_index => l_index,
p_encoded => fnd_api.g_false,
p_data => l_msg_data,
p_msg_index_out => l_msg_index_out
x_msg_data := x_msg_data ||'['||l_msg_data||']';
END LOOP;
end if;
EXCEPTION
WHEN Fnd_Api.G_EXC_ERROR THEN
x_return_status := Fnd_Api.G_RET_STS_ERROR;
ROLLBACK TO UPDATE_RO_STATUS_PUB;
Fnd_Msg_Pub.Count_And_Get(p_count => x_msg_count,
p_data => x_msg_data);
IF (Fnd_Log.level_error >= Fnd_Log.g_current_runtime_level)
THEN
Fnd_Log.STRING(Fnd_Log.level_error,
'csd.plsql.CSD_REPAIRS_PUB.Update_ro_status',
'EXC_ERROR[' || x_msg_data || ']');
END IF;
if(x_msg_count > 1) then
FOR l_index IN 1 .. x_msg_count
LOOP
fnd_msg_pub.get (p_msg_index => l_index,
p_encoded => fnd_api.g_false,
p_data => l_msg_data,
p_msg_index_out => l_msg_index_out
x_msg_data := x_msg_data ||'['||l_msg_data||']';
END LOOP;
end if;
WHEN Fnd_Api.G_EXC_UNEXPECTED_ERROR THEN
x_return_status := Fnd_Api.G_RET_STS_UNEXP_ERROR;
ROLLBACK TO UPDATE_RO_STATUS_PUB;
Fnd_Msg_Pub.Count_And_Get(p_count => x_msg_count,
p_data => x_msg_data);
IF (Fnd_Log.level_exception >= Fnd_Log.g_current_runtime_level)
THEN
Fnd_Log.STRING(Fnd_Log.level_exception,
'csd.plsql.CSD_REPAIRS_PUB.Update_ro_status',
'EXC_UNEXP_ERROR[' || x_msg_data || ']');
END IF;
if(x_msg_count > 1) then
FOR l_index IN 1 .. x_msg_count
LOOP
fnd_msg_pub.get (p_msg_index => l_index,
p_encoded => fnd_api.g_false,
p_data => l_msg_data,
p_msg_index_out => l_msg_index_out
x_msg_data := x_msg_data ||'['||l_msg_data||']';
END LOOP;
end if;
WHEN OTHERS THEN
x_return_status := Fnd_Api.G_RET_STS_UNEXP_ERROR;
Rollback TO UPDATE_RO_STATUS_PUB;
IF Fnd_Msg_Pub.Check_Msg_Level(Fnd_Msg_Pub.G_MSG_LVL_UNEXP_ERROR)
THEN
Fnd_Msg_Pub.Add_Exc_Msg(G_PKG_NAME, l_api_name);
END IF;
Fnd_Msg_Pub.Count_And_Get(p_count => x_msg_count,
p_data => x_msg_data);
IF (Fnd_Log.level_exception >= Fnd_Log.g_current_runtime_level)
THEN
Fnd_Log.STRING(Fnd_Log.level_exception,
'csd.plsql.CSD_REPAIRS_PUB.Update_ro_status',
'SQL MEssage[' || SQLERRM || ']');
END IF;
if(x_msg_count > 1) then
FOR l_index IN 1 .. x_msg_count
LOOP
fnd_msg_pub.get (p_msg_index => l_index,
p_encoded => fnd_api.g_false,
p_data => l_msg_data,
p_msg_index_out => l_msg_index_out
x_msg_data := x_msg_data ||'['||l_msg_data||']';
END LOOP;
end if;
End Update_ro_status;
-- R12 Development End
End CSD_REPAIRS_PUB;
Plzz checkout help me out -
MY ipod 1st gen is being relaly MEAN TO ME *cries* please please HELP MEEE
t ran out of abttery and was like DEAD for almsot a year n then i jsut recently tried to make it lIVE and then i press the menu n center button thing(nowq codenamed reboot for now) and it didnt work i rebbooted it agian and it had life n i recharged it n then it was frozen, then rebooted it frozen, rebooted it worked for a bit, frozen, reboot and the same cycle,
i put songs on it n they palyed, but then the ipod froze STILL playing the song, and w/e i put it on hold n put it back it reboots itself
it's really annoying!!
can i like send it in n get a completely new and different one?
can i get it refurbished so its new?
can i send it in for a 2nd generation?
or do i jsut chuck it cause it doesn't work??
_*i would really really really really LOVE HELP*_uuhhhhh.....try taking it to the apple store and they might give you a new one if your warranty isn't up, btw you need to work on your typing skills.
-
Please help meee!!!
I was using my ipod touch 5th gen and then, it didn't turn on anymore and it was fully charged... Basically is dead... I don't know how to turning it on again! I tried to connect my ipod in the PC and it didn't work, I can't do the "recovery mode" because my home button doesn't work! Somebody help me! I don't know what is happening... What can I do? It has the last iOS update. I'm desperate. Thank you for the help.
Try:
Turn on without Home/Power Button -
My doc won't work, please help mee! :(
For about 6 months now my doc hasn't been working properly, 'finder' and 'trash' are both invisible, and I cannot hold down an icon on the doc to remove it or open ect. I have tried "killall Dock", I've tried deleting things in ~/library, argh please help
At this point I thinking a typical fix solution has been further complicated by user tampering with system and hidden files.
So I'm going to recommend you do this.
1: Backup your users files folders (music, pictures, movies, documents, etc) to a regular external drive in addition to any other backups, like bootable clones/TimeMachine and disconnect all drives from the machine.
Emergency backup procedure
Drag and drop copy your users file folders (music, pictures, documents etc) to a regular external powered drive as soon as possible.
Do not use, setup or trust only TimeMachine at this troubled time as it will copy corrupted data and we need just your users files safe just in case. TimeMachine cannot be used with a Windows PC.
Unmount and Disconnect all external drives once the backup process is completed.
Note:
If you have any over 4GB sized files, those won't copy to a standard formatted FAT32/MSDOS drive from the factory, if you need to save these 4GB+ files use another blank/empty drive and use Disk Utility to format it 1 Partition, Option: GUID, Format: OS X Extended Journaled (the standard default)
Mac's cannot copy to nor format a NTFS drive. exFAT format to be used with a Windows machine must be right click formatted by Windows, not OS X (does it wrong) XP macines can install a free exFAT update from Microsoft. Vista-Win 8 can format exFAT. OS X 10.6.5 and up can use exFAT.
Formatting a drive will erase all data on it, so make sure there is nothing you want remaining on the drive.
Most commonly used backup methods
2: Next proceed with fixing your machine in the Steps here in order to catch other issues and your original problem.
..Step by Step to fix your Mac
To fix the changes in your ~/Library, your going to have to transfer a copy of your users files folders (music, pictures, movies, documents etc, no Library) into a new account on the machine via the Shared folder, then log into the new account and delete the old one, reboot and recreate the same account again, then transfer files back and do a #6 Repair Users Permisisons to reset those file permisisons to the new account (even if it has the same name)
Don't forget to export bookmarks, emaill addresses, addressbook contacts and other things.
See Step #17 and this User Tip
Combine two+ Users Accounts on the same machine
What this will do is give you a brand new ~/Library and all your problems should be resolved hopefully. -
My ipods been freezing for a while but i just reset it every time it did but now it wont let me reset it, i read about restoring it on itunes but it wont come up on itunes when its frozen on the white screen
Try the white-screen topic here:
iPod touch: Hardware troubleshooting
Frequently it is due to a hardware problem.
Maybe you are looking for
-
1z0-599 Oracle weblogic server 12c Essentials
Hello there, Can some please answer below questions. I found these practice questions over internet and I am so confused with the questions as i don't know correct answers. Please answer them if you know any. Thanks You completed the development of a
-
Livecycle 8.0 multiple signatures problems
Hi, When I add 2 digital signatures to same pdf document and sign them, the first signature reports "The revision of the document that was covered by this signature has not been altered; however there have been subsequent changes to the document". Th
-
I have was moving music from iTunes to a CD, however, when attempting to move a second set of music a error message stating "this is not a blank CD". How can more music be copied to this CD, which has more than sufficient space to be copied to?
-
Running Sum does not reste at the start of new period
Hi Gurus, I am using function Running SUm for a variable. The problem is our Fiscal period starts in September. SO the running sum should reset at teh start of every period. but its not happening. Any Idea why? Regards
-
Backup orig FCStudio install disks before sending for crossgrade
I am currently running FCP5.0 and decided to do the crossgrade with Apple (mainly because I just purchased Shake 4.1 and found out from a posting on the list AFTER I purchased it that Shake 4.1 won't run with 5.0.4) Taking the suggestion of other pos