Please Help...Megaplayer541 set play mode not found
hi i have megaplayer 541 i read the manual well the only option i loose is SET PLAY MODE how can i reach it --- keep in mind that i enter all set modes except play mode i didn't find it...i need urgent solution?!!!
what do you mean by "set play mode"?
if you mean play mode as in "repeat", "shuffle" etc, its here:
Similar Messages
-
Please help with this error. file not found yet it is in path. thanks
when attempting to launch app, the following error is recieved:
<Sep 30, 2004 1:30:47 PM EDT> <Error> <NodeManager> <Node manager could not find the required library, libNodeManager.so, in path - /usr/j2se/jre/lib/i386/client:/usr/j2se/jre/lib/i386:/usr/j2se/jre/../lib/i386:/export/home/bea/weblogic81/server/lib/solaris:/export/home/bea/weblogic81/server/lib/solaris/oci920_8:/usr/lib>
i have copied the noted file, libNodeManager.so to every directory in the path, set permissions to rwxrwxrwx checked case and spelling.
what am i missing?
thanks in advanceTry runnning ldd -v <program>
This will list all the libraries that you will need to have in your library path, I am not a programmer, I am assuming that libNodeManager.so might be calling another library(ies) which you cannot find.
I hope this helps.
Regards,
-Chris -
I am facing wifi and mobile 2G signal issue after upgrading to IOS 6 from IOS 5 in IPhone 3GS. The mobile carrier signal as well as WIFI suddenly drops zero and are then restored automatically. Sometimes i cannot conenct to WIFI even standing infront of WIFI router. Please help, restoring setting even didn't helped.
Update: my phone's connecting to the WiFi again. I don't know what did the trick. I did nothing since reinstalling the software. It hadn't worked then, it is now. I tried connecting to my dad's phone's hotspot( he uses a Moto G), and it worked. I then tried connecting to the WiFi at a friend's house, and when I came back home, my phone was able to connect to my WiFi! Is it of any significance that my friend's router doesn't require a password? My issue has been resolved( for now; I hope I'm not counting my chickens before they've hatched). For anyone facing a similar issue, I suggest you try everything I did:
1. Turn your router off for a minimum of 30 seconds, turn it back on and try connecting.
2. Click on the WiFi network you are connected to, scroll to the bottom, tap "Renew Lease".
3. Do a soft and hard reset.
4. Reset network settings.
5. Back your data up, erase all content from settings menu, restore from backup.
6. Reinstall your software( put it in recovery mode).
I am not sure which of the above worked for me. Make sure you try everything. If none of the above works, take it to a genius bar or an authorised service provider. Good luck! :) -
Please help to set the time zone in a porper way
Dear Folks please help to set the time zone in a porper way
select sessiontimezone from dual;
Database: Oracle 11.2.0.2
Operating system: AIX 5.3
SESSIONTIMEZONE
+00:00
SQL> select systimestamp from dual;
SYSTIMESTAMP
06-NOV-12 04.21.07.438426 AM +00:00
SQL> select dbtimezone from dual;
DBTIME
+00:00
SQL> Select DBMS_SCHEDULER.get_sys_time_zone_name from dual;
GET_SYS_TIME_ZONE_NAME
Asia/Kuala_Lumpur
By looking Doc ID: Note:149120.1 in Metalink:
ALTER DATABASE <my db name> SET TIME_ZONE = 'Asia/Kuala_Lumpur'
or
ALTER DATABASE <my db name> SET TIME_ZONE = '+08:00'
For reflecting the change I refreshed the db by shutdown and restart.
but still the returning no timezone value for user schema, please help how to set the time zone in a proper way?SQL> conn sys/sys as sysdba
Connected.
DBNAME
db
SQL> select u.name || '.' || o.name || '.' || c.name "Col TSLTZ"
2 from sys.obj$ o, sys.col$ c, sys.user$ u
3 where c.type# = 231
4 and o.obj# = c.obj#
5 and u.user# = o.owner#;
no rows selected
SQL> select DBTIMEZONE from dual;
DBTIME
+00:00
SQL> alter database set time_zone='Asia/Kuala_Lumpur';
Database altered.
SQL> select DBTIMEZONE from dual;
DBTIME
+00:00
SQL> startup force;
ORACLE instance started.
Total System Global Area 426852352 bytes
Fixed Size 1375060 bytes
Variable Size 260048044 bytes
Database Buffers 159383552 bytes
Redo Buffers 6045696 bytes
Database mounted.
Database opened.
SQL> select DBTIMEZONE from dual;
DBTIMEZONE
Asia/Kuala_LumpurRefer:
Re: how to check db time zone
Edited by: Ora on 5 Nov, 2012 11:36 PM -
Hi, After I installed Mac Lion, I have problem with the tamil font while typing in Neo Office. Especially with the letters "e-Ex: தெ" and "ai-Ex:தை". Please help me I know its not bug from Apple It shd be some problem in neo.
Is your problem due to the keyboard or to NeoOffice Characters? You have to change probably the font. Not all fonts are supporting all Unicode sets. Which font you have in your NeoOffice set to write Tamil? Try with Arial Unicode MS for example.
Are the letter e-Ex and ai-Ex right in your posting? If they are right, how you inserted these letters in your posting? By copy and paste or by typing? If by typing, your question is related to NeoOffice. Probably you should reinstall or update NeoOffice? Or switch to OpenOffice?
marek -
RIDC api: The result set 'content' was not found or is empty
Hi,
I am trying to add a revision using COLLECTION_CHECKIN_REVISION. The content which I want to add a revision has only one revision i.e. 1,
and its dID is 3746 and is already checked out.
<code>
binder.putLocal ("IdcService", "COLLECTION_CHECKIN_REVISION");
// get the binder
binder.putLocal ("dDocTitle", "Html file");
binder.putLocal ("dDocName", "SUN00100");
binder.putLocal ("dDocType", "Document");
binder.putLocal ("dSecurityGroup", "Public");
binder.putLocal("hasCollectionID", "true");
binder.putLocal("dID", "3746");
binder.putLocal("dRevLabel", "2");
binder.putLocal("dCollectionID", this.getFolderIdFromPath(idcClient, userContext, PATH));
System.out.println("dCollectionID###############################" +binder.getLocal("dCollectionID"));
binder.addFile ("primaryFile", new TransferFile(new File("D:\\P6WS\\RIDC Test\\src\\com\\oracle\\ridc\\poc\\2.html")));
// checkin the file
response = idcClient.sendRequest(userContext, binder);
System.out.println("response "+response.getResponseAsString());
</code>
And the output is as follows
dCollectionID###############################739373434448003784
response <?hda version="11gR1-11.1.1.5.0-idcprod1-110413T184243" jcharset=UTF-8 encoding=UTF-8?>
@Properties LocalData
deleteCompleteInCollections=true
dDocType=Document
refreshSubMonikers=
dUser=sysadmin
anyState=true
primaryFile=2.html
StatusMessage=<strong>The result set 'content' was not found or is empty.</strong>
UserTimeZone=UTC
localizedForResponse=1
dDocName=SUN00100
changedMonikers=
I want to understand which content is being referred. The primaryFile is existing in the same location.
Did I missed out any required parameter.
regards,
Sunil Kumar Dhage
Edited by: 881595 on Aug 26, 2011 4:18 AMLike last time: documentation is not a big help here, so you have to do a bit of investigation yourself.
In order to understand result sets, check this link: http://download.oracle.com/docs/cd/E17904_01/doc.1111/e10726/c04_master_usage.htm#CSIDO249
('content' is the name of the result set)
I can't imagine why you would need such a result set while checkin in a new revision to a folder, but the documentation (http://download.oracle.com/docs/cd/E17904_01/doc.1111/e11011/c08_folders.htm#i1082329) advices that some sub services are called, so it might actually be an error coming from these subservices. I'd suggest to narrow down the search first - turn on requestaudit in server-wide tracing (see here: http://download.oracle.com/docs/cd/E17904_01/doc.1111/e10792/c02_processes.htm#CSMSP536).
Alternatively, you could also perform your service call from GUI and trace what parameters are provided. I guess something will be missing. -
HT1766 please help my ipad min is not working on the scren it says iPad disabled connect to itunes
please help my ipad min is not working on the scren it says iPad disabled connect to itunes
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
can someone please help .. my ipod is not recognized by itunes in windows XP .. i've uninstalled and re-installe i tunes about 10 times now to no avail ?? thank you .. dave
Start here:
iOS: Device not recognized in iTunes for Windows -
Will someone please help me set-up Acrobat to send a PDF via webmail? Acrobat returns a message "Server Connection Error .... Port 143 unavailable"
Are you using a Microsoft or Apache web server? If so, you can submit to a server-side script, which will bypass web mail and client-side email software such as OUTLOOK.
For examples:
http://www.nk-inc.com/software/pdfemail.net/examples/ -
Please help me set up flash player on my macbook
please help me set up flash player. i have downoaded and installed it 10x. even had a professional do it. nothing works. i have a macbook pro 10.7.5
run the uninstaller first: http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-mac-os.html
then manually dl and install fp from the link on this page: http://helpx.adobe.com/creative-suite/kb/troubleshoot-download-assistant.html#main_Known_i ssues
Progress bar hangs during download / Unable to connect to server / Unable to download metafile
Reason: The Flash Player installer sometimes has trouble working in some firewall proxy server environments.
Workaround: Download the Adobe Flash Player installer directly by clicking one of the following links.
Flash Player for ActiveX (Internet Explorer)
Flash Player Plug-in (All other browsers) -
Error Msg : Input parameter WRITE MODE not found
Hi,
When i run the package for loading the master data from BI to BPC the following error message is displayed:
"Input parameter WRITE MODE not found"
iam unable to see any update modes when i try to execute the package for master data loads...like Over write Update
what is missing? any thoughts on this??
RegardsHi,
how did you solve this issue, since we have a similiar problem when loading maser data using /CPMB/IMPORT_MASTER ..
D
okay, found the solution in OSS note 1359787 ...
D
Edited by: Dries Paesmans on Nov 10, 2009 11:24 PM -
How do i change my iPad language because I went to general and international and changed the language to English, but most things are still in Spanish. Please help me set everything to English
To clarify Settings > General > International > Language is set to English?
and Settings > General > International > Keyboard > includes the English keyboard?
When you are on your Home screen is Settings called 'Settings' in english?
what are the things that are still in Spanish? -
In iTunes 11.1.3.8 on my Windows 8 HP Laptop, when trying to "Burn Playlist to Disc", I get the Burn Settings window "E: hp DVD A DS8A9SH", then I select MP3 CD and click "Burn", I unfortunately get the dreaded iTunes "disc burner or software not found...". I think this is the second time this has happened (first time I think a simple reboot fixed it), and I assume because iTunes was updated this issue came back again and I cannot burn MP3 cds anymore because of it!
I've followed all steps outlined in this support article "iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install" (http://support.apple.com/kb/TS2308)
Solution 1, no updated firmware was available for dvd drive.
Solution 2, not relevant because those files were not present when I looked for them.
Solution 3, I'm familiar with regedit and did exactly what the step by step instructions told me including rebooting multiple times to completely remove Gear drivers/keys, installing the new Gear driver files with their official setup file "For 32-bit and 64-bit systems:" from http://www.gearsoftware.com/support/drivers.php (and gave another reboot just in case) and opened iTunes at the very end of the entire process.
Still getting the dreaded "disc burner or software not found..." error when trying to burn a playlist to a CD. The weird thing is when I click Burn playlist to a CD, I see the DVD drive "E: in the next prompt which asks for Data CD/MP3 CD, Audio CD.
So I clicked on Help > Run Diagnostics, selected "CD/DVD Drive tests" only and clicked "Next".
Window says "To begin the test, please insert a prerecorded audio cd..." so I did that and clicked "Next".
Under "Choose an optical drive to test:", the drop-down menu only shows "[Choose a Drive]", no other options. Under "Optical drive:" it says "No drive chosen for testing.", and I click the "Next" button.
Here are the diagnostics output I got:
Microsoft Windows 8 x64 Home Premium Edition (Build 9200)
Hewlett-Packard HP Pavilion g6 Notebook PC
iTunes 11.1.3.8
QuickTime not available
FairPlay 2.5.16
Apple Application Support 2.3.6
iPod Updater Library 11.1f5
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 7.0.0.117
Apple Mobile Device Driver not found.
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 002AB1700B7C4780
Current user is not an administrator.
The current local date and time is 2014-01-20 18:23:52.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 11.1.3.8 (x64) is currently running.
iTunesHelper 11.1.3.8 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
I'm extremely confused as to what to do next. I was thinking I should try reinstalling iTunes but I'm not sure that would even work and I'm so paranoid about installing it correctly and referencing the right existing library files that I'd like to see other suggestions first.
Any help from the community or Apple would be tremendously appreciated and I would be glad to do more testing and provide more details. Thanks!Hi there aaxim,
You may find the troubleshooting steps in the article below helpful.
iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install
http://support.apple.com/kb/TS2308
-Griff W. -
I have deleted my Apple ID from the apple store but had it previously associated with my Ipad, that I set 'to find' my ipad. but since i've deleted the orginal account I cannot access my ipad! The ipad is currently in DFU mode but still asks for a password, please help!
Your Apple ID still exists with the most recent password that you used. You can use it to erase your iPad. Read this.
-
Help! Another "Entry Point Not Found" Error
Hello,
I purchased iPhone 4 earlier this week and went to synch it last night. Apple Updates updated and crashed several times, now iTunes won't even start. I already had it set up for my iPod, my iPad, and a prior iPhone, so just plugged my new iPhone in and went to town. iTunes did update all my apps before I used Apple Update. I was trying to get the OS updates for both my iPhone and iPad, but now it doesn't work. I tried downloading iTunes again and running the fix and it didn't work. I am runing Windows 7 64-bit.
Here is my error message:
iTunes.exe - Entry Point Not Found
The procedure entry point
kCMByteStreamNotification_AvailableLengthChanged could not be
located in the dynamic link library CoreMedia.dll
Then a second dialog box pops up that says:
iTunes
Itunes was not installed correctly. Please reinstall iTunes.
Error 7 (Windows error 127)
Please help!
Thanks, SeanHi vladdy007,
Please upgrade your OS to Win XP SP3. This would fix the problem. The minimum spec for running AI CS6 is Win XP SP3.
Thanks and Regards,
Nishant Kumar Thakur
Maybe you are looking for
-
JMS paging store - what is difference between bytes and messages threshholds?
You can activate and configure both "bytes paging" and "message paging". What is the difference? Why use one or the other or are both required? Thanks, John
-
After updating to iOS 5, I can't seem to find my digital zoom on my iPhone 4.
Hi, I just recently updated my iPhone 4 16 GB GSM to the newest operating system - iOS 5. The only problem I have encountered is when i'm in camera mode (rear-facing camera) and I tap the screen once to try and zoom in, the digital zoom bar doesn't s
-
How to Download Employee W2 information in EFW2 format
Hi, I am new to Tax Reporting in HR. We have a requirement to download Employee W2 information in EFW2 format and send to third party vendor after the employee's consent. Can you please throw some light on the procedure and pre-requisites to do this.
-
The Wiki entry of the Apple wireless keyboard mentions there's an international English version of the Apple Wireless Keyboard (WK). As has the MBP, for that matter. That is, it doesn't have the elongated Enter key as is on the traditional US keyboar
-
What options do I have for saving part of a file in Illustrator CS6
I would like to save portions of a file in AI CS6 as SVG files. Is there a way to just save a selected group? Or can I save / export contents from an individual artboard? Thanks