Please Help Moved from India to USA with Lenovo
Recently we came to USA and got Lenovo 3000 31Q desktop with us safely but when we tried to connect system , the monitor (Flat screen Lenovo) shows "No Input" means it is not communicating with the CPU,all the connections including monitor to cpu are ok but not able to c any output ,no power issues,can anybody help us in this matter, thanks
Hi, Greg -
Welcome to Apple's Discussions.
There might be a couple of things at play.
• The symptoms you describe usually indicate the PMU needs to be reset -
Article #95037 - G4 (AGP) - Resetting PMU
Note - although that article is written around a G4 (AGP) model, the same procedure applies to all G4's except the (PCI) models; the particular location of the PMU button may vary from model to model, but is usually near the internnal battery.
• You may also need to replace the internal battery. That battery is used whenever the machine is unplugged from a live source of power - the Mac draws a bit of current even when shut down in order to maintain PRAM settings and the clock chip; that chore is taken over by the battery when there is no live power available. Since your machine was unplugged for a while when it was in transit, the battery may have been drained - especially if it has never been replaced.
You can get a replacement battery at places like Radio Shack for about US$15, cheaper on line.
Similar Messages
-
I have purchased my iPhone 4S from USA. Its a Factory unlocked phone. I am facing problem with the hardware. Is there any support that apple provides to send the phone from India to USA to get it replaced? Also if there is any travelers Policy?
No and no.
-
I've just moved from PC to Mac, with my PC i and using Vmware Player I used to work on 2 Virtual M/C both on 2 external drives, one Windows Server 2000 as operating system and the sec. WindowsXP, is their a way to open these m/c on my mac
I am so glad to hear about your success. As you are new to the Mac environment, I will be glad to help you more.
You said: "I can't change the setup yet but i have access". I don't understand what you mean about changing the setup! Please let me know more about that.
I also recommend to use Boot Camp, which allows you to install windows on a partition of your internal hard drive. This has many benefits. First, you can restart your computer and start up in windows. This makes your Mac device a complete windows machine and you gain the most from your hardware when working in Windows. Second, if a problem occures to your Mac OS X, you can restart your machine in Windows and prevent your data from getting lost. Third, you can import the Windows installed on the boot camp partition in to the Mac OS X using VMWare Fusion and work with it as a virtual machine. In this situation, VMWare enables you to work directly with your Windows in the boot camp partition. So it does not create a file package for the virtual machine in OS X.
Regarding the data safety and reliablity, I strongly recommend using Time Machine. You can also set it up to back up your virtual machines or not. This is possible to set up in the Virtual Machine Preferences Page in VMWare Fusion, or in the Time Machine preferences page in the System Preferences app of OS X.
Please don't hesitate to ask any other question. I will be glad to help you. -
Please help to get onhand stock report with last purchase and billed date warehouse and item wise
please help to get onhand stock report with last purchase and billed date warehouse and item wise
Hi Rajeesh Ambadi...
Try This
SELECT distinct T0.ITEMCODE , t1.ItemName, T0.ONHAND as 'Total Qty',
T1.LASTPURDAT ,t1.LastPurPrc
FROM OITW T0 INNER JOIN OITM T1 ON T0.ITEMCODE = T1.ITEMCODE
INNER JOIN OITB T2 ON T1.ITMSGRPCOD=T2.ITMSGRPCOD left join ibt1 t3 on t3.itemcode = t0.itemcode and t3.whscode = t0.whscode
WHERE
T0.ONHAND>0
AND T0.WhsCode ='[%0]'
Hope Helpful
Regards
Kennedy -
Please help me creating a new listener with different port#.
I have two instances in a server. both have different homes. I want to create a seperate listener for the second one i created.
But that is not happening.
here i tried to give name from LISTENER TO LISTENER1 & Port# from 1521 to 1524.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /apps2/oracle)
(PROGRAM = extproc)
LISTENER1 =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = aixth53)(PORT = 1524))
When I check lsnrctl status with LISTENER1 , it still shows the other instance home with port#: 1521
Please help me creating a new listener with different port#.
Thanks,marist89 wrote:
sb92075 wrote:
marist89 wrote:
sybrand_b wrote:
The listener is a broker only and doesn't play any role in normal communications.
It just forks a process or a thread, and that's it.And the listener is a single point of failure. Listener goes down, you can't connect to the db. That's why you need two listeners.If listener one goes down, then listener two goes down for exact same reason since it is a single executable file.I'm not playing tit-for-tat with you. Fact is, there are situations where people who are not you might want to use more than one listener.Some folks might want to jab a sharp pencil into their eye, too.
Just because you can do something, it does not necessarily mean it should be done. -
Please help us, we have a problem with loading a page is slow we have to wait a longer time to open our one page, thanks in advance
You can try these steps in case of issues with web pages:
You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
Please help me in resolving the URL with parameters.
Hello,
Please help me in resolving the URL with parameters. If desformat is pdf, a pop up message �Acrobat Reader could not open �pa034922.fdf� because it is either not a supported file type or because the file has been corrupted���.
if desformat is html or xml, the following URL is working.
our requirement, report should be in pdf format.
http://servername:7778/dev60cgi/rwcgi60?server=Rep60_mclaren&&userid=bizsystest/test@business&destype=cache&desformat=pdf&report=salary_dept.rdf&p_dept_list=''ABE','ASE','CE','CHE','CS','DE','DIAL','ECE','ERC','IE','ME','PTE','ARC','ASE1''&p_status_list=''ACP','AD','AP','ATP','D','FE','HD','INS','P','RP','S','TF','TP','TS','ST','GS','O''&p_sex=''M','F''&p_order_by='Name'&p_totals='NO'
Thanks in advance,
UshaWe've seen this bug on machines running IE6 with a certain security patch (I forget its number). There's a thread in the Metalink reports forum about it. It appears to be somewhat tied to another problem where IE runs the report twice (you can see that in Showjobs. You're seeing the problem in 6i; I believe it persists in 9i.
The workarounds are (1) set Acrobat so it doesn't open within IE or (2) switch to a different browser, like Netscape. For workaround 1, Start Acrobat Reader, Choose File -> Preferences -> General, Uncheck Web Browser Integration
There's some evidence that it occurs more often with urls that include single quote characters. I think it's worse with XP, but I don't have any proof.
If you check Adobe's site, you will see this isn't just an Oracle Reports problem. I think we're waiting for Microsoft on this one, so don't hold your breath for a quick fix.
-- jim -
yesterday I have purchased Ipad2 with 3G but did not able see in built aceTime on my scree do we need to Install? please Help, yesterday I have purchased Ipad2 with 3G but did not able see in built FaceTime on my scree do we need to Install? please Help.
See this support doc on how to use FT... http://support.apple.com/kb/HT4319
-
Can anyone please help me, I'm having problems with sound while watching video clips using flash player & Internet Explorer
There's a good chance that this is a known issue. We'll have a Flash Player 18 beta later this week that should resolve this at http://www.adobe.com/go/flashplayerbeta/
-
Why does iMessages does not work properly ? Please help me ! Its works better with the previous version if compared with the latest iOS
Many, many thanks for both of you Todd and Rick.
to Rick:
I suppose you mean the Color Settings in Project Settings as follows:
- Working Space: None
- Match Legacy ... Gamma Adjustments checked ON
But it does not correct the colors in effects. And checking or unchecking Make Movie/Output Module Settings/Color Management/Profile/Preserve RGB does not make any difference.
to both of you:
Those parts of the video image that does not have color effects are just fine. In these parts the color is preserved when reimporting to FCP. However, those parts having color effects (except Levels, as decribed earlier) have altered color results. So, only the parts having effects affecting color are misinterpreted in the image area. The mismatch is of course seen in AE, before making the movie.
What I ment with "Color Management not working properly" is that (instead of "disabling" it) Color Management does not seem to be able to correct this "misinterpretation" or difference in effect handling between AE 6 and 10.
So, would you have any solution for this problem?
Again, many thanks for your fast replies! -
i want to replace my front screen of 4S. Please help me to identify original screen with fakes?
Apple does not sell parts.
Either get the entire device replaced under Out of Warranty exchange or take your chances with non-oem parts. -
Hello friends
I don't have FaceTime in my iPod touch 4 please help me from where can I get FaceTime live in Saudi Arabia.There is no Facetime installed on devices bought in certain counties, your country is one of them:
FaceTime in the Middle East: The story so far
Apple Tells Us Exactly Where FaceTime Is Not Available
And it can't be installed on those devices, due to certain laws in those countries. -
Want to take IMac from India to USA ? Suggest ways please .
I am from India and i wanted to take my 27' IMac which is 1.5 Yr old to US for my Masters. Wanted to know what would be the best way to go abt it ?
What Carolyn Samit said.
-
PLEASE HELP!!! Black Screen with white curser at startup...
at startup after grey screen fan turns on and screen turns black with a white curser in the upper left. Then one line of text shows saying something to do with single user mode failed with a bunch of other text. (sorry I didn't write it down) It then vanishes for a minute with just the white curser remaining and repeats.
Ran hardware test... everything OK
I have repaired permissions which took almost an hour of CD.
I tried repairing disk failed " Invalid Key Length, volume check failed" twice.
I am currently running os off external backup HD.
I tried doing a archive and install but said I could not because the my os software(10.4.11) was newer than my original CD (10.4), is that correct?
I do not know what to do? Please help!!!!You will need to reinstall OS X, but you cannot do an Archive and Install until you repair the drive. See the following:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update. -
Please help! Cannot connect to Itunes with Iphone or on laptop!
I dont know whats going on but I need someones help. I just bought an iphone today and cant log in into app store. It says "Cannot connect to Itunes store" when entering my apple id. I have made an account online. The weird thing is that my girlfriend account logs in just fine. Same thing with the Itunes on out laptop. I can sign in to Itunes with her account just fine, but when i sign in with mine it says "We cannot complete your itunes store request, an unknown error occured (0x800B010F) There was error in the Itunes store please try again later" But how can that be possible if my girlfriends account logs in perfectly fine? I made another account and nothing still the same, Help very frustrating since we just moved from android. I did the time adjustment by switching the year and time and going back to app store, made a new account, reseted iphone, reseted settings, whats going on? Please help
Start iTunes on your computer and make sure you are logged into your account. Now connect and sync your iPhone and Touch, disconnect and try again.
Maybe you are looking for
-
How do I get notifications of incoming mail? I have set this up on 3 accounts and the "beep" only works on incoming email for one of the 3 accounts. The emails come in fine but I have to open up the phone to see if I have any messages.
-
Bug Report - Some items in your iTunes Library ... because the file could not be found.
10.6 and this is still this is a problem?!?!?!?! Not like this is an obscure issue only affecting a few noobs. Google returns 11,200 results on this issue!t' Can we PLEASE at least allow the list of broken files to be dumped as a text file so I can f
-
Sort a Stack, without sorting entire Album
Is there any way to sort a Stack (by rating for example) without affecting the sort order of the test of the Album? Grant
-
The value should be set for Base image URL and Image file directory
Hi experts Now customer has the following issue. XML Publisher concurrent request, using RTF layout template with LOGO, does not generate the LOGO for Excel output. but in output formats PDF, it is shown normally. from the debug log, we can found the
-
Idoc and change pointers question.
Hi everybody, How can I create a change pointer automatically for a change document on table JCDS? Becuase I can create change pointers for the change documents on table CDHDR, but I need to catch a technical object status change and create an idoc f