Please Help! MSI 780Ti Gaming is not OC out the box as Advertised
Hi Guys
my new MSI 780T'i's arrived yesterday and the performance is great, only the core clock is 980MHz as apposed to the advertised 1020MHz
I did not receive a Gaming Branded disk either. However acording to the HARDOCP review: "If you do not install the software, then the card will default to "OC Mode" (with the frequencies described above.) In "Gaming Mode," the core clock drops to 980MHz with the boost clock at 1046MHz and in "Silent Mode," the core clock drops to 876MHz and the boost clock to 928MHz (the same as the reference card.) "
Out the box without the MSI drivers and latest Nvidia Drivers my card seems to be set in Gaming Mode???
Any help would be great
Quote from: J4K5 on 07-March-14, 18:08:16
my new MSI 780T'i's arrived yesterday and the performance is great, only the core clock is 980MHz as apposed to the advertised 1020MHz
All the "Gaming" cards default to Gaming Mode.
In your case:
http://www.msi.com/product/vga/GTX_780Ti_GAMING_3G.html
1020MHz Core (Boost Clock:1085MHz) (OC Mode)
980MHz Core (Boost Clock:1046MHz) (Gaming Mode)
876MHz Core (Boost Clock:928MHz) (Silent Mode)
Similar Messages
-
HT1766 please help my ipad min is not working on the scren it says iPad disabled connect to itunes
please help my ipad min is not working on the scren it says iPad disabled connect to itunes
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
Card reader not working out the box scr 3500?
cac card reader not working out of box scr3500 help
Welcome to discussions Kevin!
I'm sorry to hear that first of all make sure that there is nothing sick on the eye of the camera it self, after that how is the lighting on the room that the computer will be set up? did the green light came on when you're trying to use iSight? i'm asking because the same thing happen to me but it was nothing but bad lighting in my office. If this doen't help call apple asap they should replace your computer with out a problem. Hope this helps good luck!
Miguel -
IMac with iSight not working out the box?
Hi,
I have literally just taken my new iMac 20" out of the box and the built in iSight camera appears not to work. It asked if I wanted to take a picture when setting up my account but nothing showed in the box. Opening Photo Booth shows a plain green screen. iChat shows no picture either.
Please could somebody let me know if this is just a simple case of me not turning something on, or is this broken?
Thanks in advance,
KevWelcome to discussions Kevin!
I'm sorry to hear that first of all make sure that there is nothing sick on the eye of the camera it self, after that how is the lighting on the room that the computer will be set up? did the green light came on when you're trying to use iSight? i'm asking because the same thing happen to me but it was nothing but bad lighting in my office. If this doen't help call apple asap they should replace your computer with out a problem. Hope this helps good luck!
Miguel -
Please Help! Ready to throw my iPhone out the window!
First time posting on the forums but it's gotten to the point where my phone isn't even usable and I either need some answers or a good excuse to smash it.
So here's the story:
I got my iPhone 3G (black, 16GB) in September (I think), last year. The phone operated fine with only minor annoyances as software updates came down to fix issues, no big deal. About 10 months in, the phone starts acting up:
If you want clarification on some problem, ask. I don’t want to type out 8 paragraphs if I don’t have to, should be pretty self-explanatory.
Before OS 3:
1.) Can’t slide to answer calls. After ringing stops phone behaves normally.
2.) Doesn’t charge from wall or computer (happened randomly). Plug phone in, it says it’s charging but never charges.
3.) Can’t end calls / call doesn’t end when other line is hung up (thanks for wasting my minutes).
(these problems persist even with hard resets and full restores, including setting the phone up as a new phone rather than restoring from a backup)
After OS 3 AND full restore:
1.) Can’t slide to answer calls. After ringing stops phone behaves normally.
2.) Can’t end calls / call doesn’t end when other line is hung up (thanks for wasting my minutes).
(same as above, problems persist with hard resets and the like)
At any rate, I was home one weekend and figured I’d take the phone to the Genius bar at the Mayfair Mall Apple Store. Sounded like a good plan until I get to the mall and find the store is being renovated (seriously Apple, you can’t just put that on your site that a store is closed for some reason? Give me a break). Home is 3 hours away for me and the closest Apple store is 2.5 hours away. Awesome.
I deal with the problems for another month or so until my girlfriend and I take a trip to visit her friend in Minnesota. While there we go to the Mall of America so I decide to go to the Apple Store there (which is flappin’ giant, by the way). I explain my problems to the ‘Genius’ as well as informing him of the numerous restores/resets I’ve done both before and after the 3.0 update. He checks the phone for water damage and concludes that the headphone/dock ports are dusty which is causing the charging problem. I proceed to tell him I’ve cleaned them with compressed air before and the problems continued but he’s the ‘Genius’ so I let him do his thing and clean them again. Afterwards, he concludes (via the iPhone diagnostic software they have) that since I haven’t done a restore in about a month that I should do another one as that will likely remedy the problem. Right. Was he even listening when I explained that the problems happened before and after the 3.0 update or that I had on numerous occasions attempted to remedy the problem with hard resets and restores? Nope. My girlfriend over hears this (she is aware of the problems I was having and is a Apple-certified hardware technician at our local Mac store) and comes over to reiterate (albeit slightly more forcefully than I had initially) that the problems occur regardless of restore state or software version. The ‘Genius’ finally decides he can replace the phone after explaining to him that we are not anywhere near an Apple store and that there’s little time left in the warranty. I get my new phone set up and ready to go. Whew.
Everything is great. Phone works, no issues. Until ~2 months ago, new issues start cropping up.
OS 3.1+ (happen on all versions):
1.) Can’t sync, get “unable to complete. Phone was disconnected.” Error. (I checked around the forums and tried a few things but was unable to resolve the issue, including trying to remove the files that it kept ‘disconnecting’ on when it got to, no effect)
2.) Installing an application (be it via App Store on the phone or via sync with my desktop) results in the phone being unable to boot if turned off. When attempting to turn it back on, Apple logo shows then phone goes off after a few seconds. Only way to resolve this is by booting the phone directly to restore mode and doing a full restore.
3.) Earlier this week, my phone wouldn’t boot after having no apps (0, zero, zip, nada) on it after restoring it a few weeks back. Apple logo showed up then the spinning loading animation overlaid on the logo only to freeze. Attempted booting again and it came on (whew).
4.) Today, my phone wouldn’t boot at all, again, no apps are on or have been on the phone since I last restored it. Tried turning it off/on a few times, no good. I ended up restoring the phone again.
At first, my girlfriend was convinced that it was because I was synching with my desktop PC (obviously, blame it on the PC first), which I’ve been using since I got the phone and everything was fine until both phones randomly decided to crap out. I ended up restoring it on my MacBook Pro as a new phone just to see but the same thing happens with the apps causing it to not boot. After that we thought that it might be a single (or a few) apps that were just taking the phone down for some reason. I restored the phone with no apps and it seemed to be ok so I put 3 apps that I’ve had pretty much since they were available (and used to work without issue) back on to see. The plan was to add a few apps until the phone stopped working properly to narrow down the offending app. Just kidding! Just having those 3 apps (Beejive IM, Facebook, iDracula) causes the phone to not boot. I restore and try just Facebook. Same thing, phone doesn’t boot. Restore, try just Beejive. Same thing, phone won’t boot. By the way, the phone doesn’t boot even without me having LAUNCHED THE APPS AT ALL. Just by being on my phone it’s totally hosed.
At this point I have no idea what to do. I want to like my iPhone again but it’s terribly worthless when I have to restore it every other day and can’t use my ~$90 worth of apps (PS: even Apple’s own ‘Remote’ app brings the phone down). I really, really hate to say it but my old HTC Hermes (Windows Mobile 5/6) PDA phone was better than this (and WinMo is god-awful).
Does anyone have any suggestions? My phone is out of warranty now and I don’t have money to buy another phone even if I wanted to.
Also, I treat my phone like a baby. It hasn't been dropped a single time, been near water, or operated outside of the safe operating temp guidlines.
I'm willing to elaborate on any of the information I provided above, just let me know.
Message was edited by: xxjudgmentxxAfter the restore did the phone work properly for a while? Say, a day or so?
If so it is possible you have an app that doesn't let go of memory properly. I reboot my iPhone ( hold sleep/wake and hole till you see the apple logo) every few days. This resets the memory. The iPhone OS has doesn't seem to mange memory very well yet. So a reboot will help with that. I have had my phone almost slow to a stop before I started rebooting. Always reboot after installing a new app. Also do you close all pages in Safari when you are done? This is a good practice. Safari will run in the background and use processor time and drain your battery quicker. Create a new blank page then close all others when you are done browsing for a while. I have also found that certain web site that have animated images like weather maps will turn the phone into molasses. As soon as i close that page it gets faster.
If all of the above have no effect then as Tamara said it is time for a trip to the Genius bar.
Good luck -
MSI Z97 Gaming 7 not booting up
Hi guys,
I have just purchased new motherboard & new intel core i7 4790K. I've installed everything & when I tried to boot up the system it stuck to 72 error code during post checks in manual which states as "Late South Bridge Initalization" Please help guys as I m not able to boot up the system.. My configuration is as follows:
Intel core i7 4790k
MSI Z97 Gaming 7 MoBo
Corsair XMS 3 4Gb RAM
Corsair H100i CPU cooler
Corsair CS750M PSU
NZXT Source 530 cabinet
Please help guys ....Hi
What you can do is either:
-Return the board (RMA)
-Try to straighten it yourself using needle, magnifying glass and bright light
-Ask local jeweler if they can straighten it up for you. -
MSI 780Ti Gaming 3G GOP BIOS Request
I'd kindly ask for a GOP BIOS for my
MSI 780Ti GAMING 3G
Here is my BIOS: filedropper.com/gk110_2
S/N: 602-V298-12SB1402074279Quote
what is the difference between this GOP and normal BIOS?
"normal" is a legacy vbios being not GOP compliant and not supporting UEFI booting while the GOP vbios does. That's it.
Quote
Are there any drawbacks?
No. A UEFI vbios is hybrid and works in legacy and UEFI mode besides latest GOP and legacy vbios versions are identical.
Quote
Is GOP version older build than normal?
No.
Quote
why is GOP enabled BIOS not default?
Do you mean why it doesn't come with a GOP vbios out of the box? If so that is because older mainboards with a UEFI bios not being GOP compliant will not work with a vga using a GOP vbios. The system would simply not post. As there is a large variety of boards that this would happen with you can assume that many rmas would come in. The issue would happen on e.g. P67, Z68, Z77, X79, AMD 990FX based boards which aren't at a quite current bios version. For some older of these there even is no GOP compliant bios. To avoid this from happening it would be needed to offer a dual vbios so the user can switch between GOP and legacy vbios (like on new R9 2xx cards) but that adds costs. Shipping the cards with a legacy vbios ensures that it will work on all systems while the user can update later if GOP support is needed. -
can someone please help .. my ipod is not recognized by itunes in windows XP .. i've uninstalled and re-installe i tunes about 10 times now to no avail ?? thank you .. dave
Start here:
iOS: Device not recognized in iTunes for Windows -
Whenever i try to sync my ipod a message keeps coming up saying "1 or more items could not be synced", apparently its error -69. Please help, i've tried rebooting my laptop, installing the latest itunes and turning off the wifi but nothing seems to work.
Are you using security software on your PC? If yes, try to disable the software or check the settings. More info here: http://support.apple.com/kb/TS3125
-
Hi, After I installed Mac Lion, I have problem with the tamil font while typing in Neo Office. Especially with the letters "e-Ex: தெ" and "ai-Ex:தை". Please help me I know its not bug from Apple It shd be some problem in neo.
Is your problem due to the keyboard or to NeoOffice Characters? You have to change probably the font. Not all fonts are supporting all Unicode sets. Which font you have in your NeoOffice set to write Tamil? Try with Arial Unicode MS for example.
Are the letter e-Ex and ai-Ex right in your posting? If they are right, how you inserted these letters in your posting? By copy and paste or by typing? If by typing, your question is related to NeoOffice. Probably you should reinstall or update NeoOffice? Or switch to OpenOffice?
marek -
I am having trouble printing I have a connection to my printer wirelessly but does not print out the correct page I want.When I do print I get a bunch of pages more than is needed and also get a code and symbols please help I am jammed at work
This can be the result of selecting the wrong driver. An older, unsupported laser printer will sometimes work with the generic Postscript driver.
-
i am unable to set up my iphone 5 after reset since am getting a error stating 'unable to reach server' . i tried restoring the same from my computer but i get a error stating server unavailable' . please help me as my phone is stuck at the set up page. so i have already tried recovery mode as well.
Contact Apple support for warranty service.
-
I bought an ipad from some one and i can't activate it and it keeps on showing that i should type the apple id and password link to that ipad which i dont know and i can't even locate thi guy. Please help if there is a chance to activate the ipad. Thanks
There is no chance at all that you can activate the iPad without the previous user's Apple ID and password. That is the feature of iOS 7 Activation Lock.
Every time I read one of these post, I can't help but think that the user asking about this (in this case - you) was duped into purchasing a stolen device. If the seller was legit, they would have erased the device completely before they sold it. -
How do I get my old apple ID/email from popping up and asking to verifie it's getting annoying? I've change everything to my new email an my old one keeps popping up please help me stop it from popping up all the time?
Did you change the ID you are using for iCoud? If so, did you delete the account, then sign back in with your new ID on your device?
-
Can a one please help me turn off auto play for Facebook the option is no longer in my General settings why is this ?
And yet the link you posted only tells you how to do it on the Facebook App for Android. Nothing about the Facebook page is mentioned at all, or how to do it on an iPhone.
With that said, and assuming you have the most up to date version of the Facebook App, you can now turn the auto play feature Off within the Facebook App itself. Tap on the "More" icon on the bottom right, then scroll down to Settings->Videos and Photos->Auto Play. If Smart auto-Play is on turn it off. Then you can set the check mark on "Never Play Videos Automatically" which is the same as Off.
Maybe you are looking for
-
Need help regarding Java decoding of IMAP attachment (IOStream related ques
Hi , I need some help regarding the processing of an IMAP attachment , It is a basic IOStream related question I guess. I have some attachment to a mail , I try to fetch it using javamail and read the content and write it to a file , I was able to do
-
Cannot upload with Transfer-Encoding: chunked
Hi, I am unable to upload a file with Transfer-Encoding: chunked. I am using Jakarta Commons HttpClient: PutMethod method=new PutMethod("http://myhost.com/test/uploaded.txt"); method.setContentChunked(true); method.setRequestEntity(new StringRequestE
-
Problems with the installation Oracle 8i Database
Hello, I need help with the installation of Oracle 8i. i got the free version of Oracle 8i in Internet, but when i start the installation i clicked in the autorun.exe but this aplication don4t start. Any one can help me, Thanks by your time.
-
Adding Special Effects - Image fade out
Know how in those nice video games where the screen fades out into another image? Is there a way to program that?
-
I have always been able to burn a CD from my I-tines library but suddenly I am not able to. The message I get is no recording software. I have looked for some help and tried downloading Itines again, I have tried downloading other fixes - nothing fix