Please Help :) MSI NX8800gt Card Wont work on MS-7255

I have the MS-7255 board and the MSI 512mb NX8800GT card with 700w power supply and 1 gig of ram but the PC wont boot up.
Not even the BIOS screen will display, the fan on the CPU and PCIE card just keep spinning.
When I insert my old radeon x1650 card the pc boots perfectly. I have tried the live update feature but when the tests complete i get a runtime error (empty object) and the update is not done.
Main steps taken :
Removed old radeon drivers, insert new MSI card, add 700w psu which works fine when radeon card is installed
Seat Card properly
Insert Additional 6 pin PCIE connector
Turn on PC
Bios screen doesn't show or any of the usual warning beeps, fan just keeps spinning
Ive never flashed a bios before and I dont have a floppy drive or usb key
I'm sure its down to an out of date motherboard but the live update will not work for me on IE 6 or 7, can you help in any way?
Ive bought a new card and a new psu I cant get it to run

I also connected the additional power supply to the card, but when I start the machine the fans on the CPU and on the Graphics card just keep on spinning and the bios doesnt appear nor do any sounds beep, unlike when I use the old radeon card when you get 1 beep and then the bios....
As best as I can make out, the BIOS and the VGA bios are out of date but I cant use live update
PSU DETAILS :
Silent Storm 700W quad 12v PSU
4 +12V rails, 18A each
Link to the Product Specification
http://www.xtremecomputing.co.uk/review.php?id=321

Similar Messages

Please help.. itunes card wont work with new email....

ok i need help. i recently got an itunes card. i typed it in. then it said i needed to answer security questions, so i changed my email. and now i cant redeem my itunes card.... so did i just waste $50? cause i typed the numbers right on the card, but it keeps saying you entered it wrong... and now i am freaking out....

iTunes Store: Invalid, inactive, or illegible codes
If still problems contact iTunes
Contact iTunes
However, I would regain use of the first account since purchases are locked to the account and yo have to log into the account to to do thinks like update apps.
Forgotten Security Questions/Answers
You need to contact Apple by:
1 - Use the Express lane and start here:
https://expresslane.apple.com
then click More Products and Services>Apple ID>Other Apple ID Topics>Forgotten Apple ID security questions.
or
Apple - Support -form iTunes Store - Contact Us
2 - Call Apple in your country by getting the number from here:
http://support.apple.com/kb/HE57
or
Apple ID: Contacting Apple for help with Apple ID account security
3 - Use your rescue email address if you set one up
Rescue email address and how to reset Apple ID security questions
For general information see:
Apple ID: All about Apple ID security questions

I can buy my needs from the game says I tell customers to help please help me Visa card not working in any Itemes games

I can buy my needs from the game says I tell customers to help please help me Visa card not working in any Itemes
games

If you mean that you have been instructed to contact iTunes support, then will need to do what it says, contact iTunes Support. These are user-to-user support forums, if you thought you were contacting Apple by posting here. Go here:
http://www.apple.com/emea/support/itunes/contact.html
to contact the iTunes Store.
If that does not answer your question, try posting in your native language, or find a friend with a better command of English to help you ask your question here.
Regards.

Please help me my ipod wont work! D:

I need serious help D:! ok so i have succesfully synced music onto my ipod b4 but i wanted more songs so i was syncing music onto my ipod touch once again and once the sync was almost finished it said something about an error and then when i unplugged my ipod all of my songs that i had 1st put on my ipod were gone D:! after that my ipod stopped showing up on itunes on one of my computers so i switched to the other and it started doing the same thing. i came on here and was told it might be because itunes wasnt up to date so i updated itunes and my ipod but after the update, during the time when it was backing up software i think, another error popped up and said something about how the session had timed out, my internet connection is fine to so it wasnt that. after that another error popped up saying i needed to restore my ipod back to its factory settings and i said ok but another error always pops up saying the sesion timed out of something! now my ipod is like it was when i first got it! the screen shows the end of a usb cord pointed at the itunes sign! ive tried turning it off but it wont work! and when i try to hook it up to itunes on either off my computers it doesnt show up in itunes and a message from windows pops up and says "Found new hardware: Windows needs to install driver software for your apple mobile device (Recovery mode)" please help me i cant even do anything at all with my ipod right now! D:

The Internet provider might have too many people using the Internet than what the particular servers are setup for. Or your computer just needs to reset. Try restarting your computer. Also do a hard reset on the iPod. Hold the power button and wake button down until you see the apple logo come on. Let go. Then let the ipod finish bopting up . Then restore your iPod as a new iPod, NOT from the backup.

Please help! ipod nano wont work at all!

Please Help! my ipod nano has decided to stop working altogether - will not switch on or connect to computer. have tried to reset it several times but it wont work!
any ideas much appreciated - it worked an hour ago and i only got it this morning!

Welcome to Apple Discussions!
Congrats, for your nano! Not for its problems, I mean!
About your iPod's problem:
First, make sure the "hold" switch isn't on. The hold switch is located on the top of your iPod. If it's orange, then that means it's on. If it's grey, it's not on. Switch it off (grey) if it was on (orange).
If that wasn't the problem, let's make sure your iPod is even charged enough. Hook your iPod into the computer using the USB cord to the computer (that also charges the iPod), leave it there for 10 minutes, and see if it comes alive.
Presuming that your iPod won't charge or wake up to your computer charger, if you have a wall charger for your iPod (that's different than the cord for the computer charger), hook it up, leave it there for 10 minutes, and see what happens.
Thes suggestions should work for your iPod. It's most likely something pretty simple.
Post back if this helped or not, I hope it did. Good day!

PLEASE HELP...TIVO WONT WORK WITH MY BEFW11S4

I contacted Tivo and they said it might be my port 443...but linksis wont support. Please help me out here.

well....hardwire a computer to the router's LAN port and access it using http://192.168.1.1 .. the default password is admin .. on the web ui , go to the "applications and gaming" tab and under "port trigerring" subtab enter port 443 ..
if you do not find the above mentioned tab , then go to the "advanced" tab , click on port forwarding/trigerring and enter port 443 ..

MSI GTX 650 Wont work on my new pc

I just bought an ASUS Desktop, it has the AMD FX-6300 Six-Coure (3.5ghz) processor. 12 Gb of ram, and it came with
AMD Radeon HD 7470 card. I also bought a Diablotek 600watt power supply to with the MSI GTX 650 I bought for it. I swapped power supplies out and graphics cards. I turned the computer on and fans spin, lights light up and everything but no sound or image shows up on the monitor. So I don't know if it is even booting up or not. I swapped the graphics cards out and left the diablotek power supply in and it works just fine. Could someone help me assess this situation on why my MSI graphics card wont work? I don't want to spend $25 for someone to run diagnostics on it.

Quote
And could you further explain the GOP vbios thing?
GOP is a UEFI feature allowing UEFI booting when using Windows8. It requires vga's vbios and board's bios being GOP compliant. Using a vga with a GOP compliant vbios on a board with not GOP compliant UEFI bios results in the machine not posting. Boards without UEFI with just a legacy bios are not affected by this issue and would work with a vga using GOP compliant vbios.
Quote
Now it does say on the system requirements intel core series or higher processor or compatible system. Does that mean it wont work with AMD processors?
No, it's just to compare the required speed level. It will work fine with AMD systems as well.
Quote
And did you mean to try it in another computer when you said try another vga system?
That's what I said:
Quote from: flobelix on 19-July-13, 02:01:46
(...) If possible try vga in another system (...).
Try the graphics card in another computer.

Hi,i have the new ipad 16gb it was working fine till i went to download te new i tunes and the apple mobile device recovery mode my windows pc cant find the software to download it i need help because my ipad wont work i only see the itunes en usb symbol.

i have the new ipad 16gb it was working fine till i went to download the new itunes and the apple mobile device recovery mode my windows pc cant find the software to download it i need help because my ipad wont work i only see the itunes and usb symbol can anybody help me.

Try these instructions:
http://support.apple.com/kb/TS3281
You may also have to go to the link in the bottom paragraph if the first page instructions do not work.

Please help! iphone 3gs wont show up on itunes

please help, my iphone 3gs was working fine for the year that i had it. now i switched computers from pc to a mac and when i plug in my iphone in to the mac it starts charging but it doesnt show up on itunes!!!!! i have itunes 10, new wire, my usb is fine, new iphone software. if u can please reply quickly!!!

See Here...
AMDS for Windows
http://support.apple.com/kb/TS1567

HT4972 please help ios 7 update not working and my screen wont change

i tried to install the ios 7 update a few minutes ago and i hit install and now it says i have to plug it into the computer so i did but the screen wont change from the black screen with the usb cable with the arrow to the itunes symbol
what do i do please help

I have the same problem with my iPhone 4...

HELP MSI TI4200 8x not working

I am currently using a P4 1.6 with ASUS P4S333 and just bought MSI Ti4200 8x 128 MB VTD and it is not working at all on this mobo. I reinstall my ASUS GF 3 Ti200 and it works......
I did took the new MSI Ti4200 8x and install it into my old Celeron 533Mhz on a MSI mobo and it works ....means my graphic card is working .....
ANy idea how to get this MSI Ti4200 to work on my P4S333 ???

Thanks for post. I've tried the KDS monitor over to the DVI connector but it still doesn't work. In addition, I have tried my old monitor on the DVI connector and it works. I have checked the pins and they are not bent or damaged.
Is there a such thing as compatibility issue with the KDS and MSI video card? Please help, anyone with any other advice or ideas? Thanks.

Please help me itunes 8 wont load w/ invalid signature error

There has to be some sort of cosmic joker who is laughing at all of us. Perhaps the folks at Verisign are playing games with us or maybe it's Microsoft. How can there be a requirement to upgrade to itunes 8 when you purchase a new Nano and then not be able to do it because of an invalid signature error. I'm not the only one who has had this problem as I see it all over the web. I have tried it on another system sitting right next to this one (Win vista x32bit) and it didn't work either. I have deleted everything and updated win installer ver 4.5 and nothing works. The application wont run because of the signature error. I'm sure that the powers that be know what the problem is but dont want to release the fix because one side or the other hasn't been paid the appropriate money. It's always about the money. I have read every thread and suggestion that I could find but cant get it to work. If anyone has the answer please help me. I'm not a technotard and this is frustrating

I am afraid AFIK a clear cut solution for this hasn't emerged.
Are you trying to update with Apple Software Update. You might try repairing it from add/remove programs and trying again after a restart.
Have you tried downloading the iTunes installer from here:
http://www.apple.com/itunes/download/
Save the file on your desktop and run it from there.
I would clear your temporary Internet files and restart your PC before doing this.
If that doesn't work, maybe running the installer from your browser would work, although saving the file is usually best.
I have one report that a problem with a router causes this problem and that replacing the router fixed it, but in this case all downloads were affected.
It would be interesting to see if you can install the standalone Quicktime as a test. You can download it from here:
http://www.apple.com/quicktime/download/win.html
You want the version without iTunes, which is not the default.

Help my Mac mini wont work with the airpot

I have got the Mac mini Intel Core Solo G5 model and ive got a ibook G4 my G4 works great and fine but my mac mini does not. I connect to the base station fine useing the drop down bit on the taskbar in finder and enter the password and it connects. But when i do network assistant and it asks for me to eneter the password again it just basicly frezzes for a min then says invalid password when i know that it is the write base station password. It did work once but froze again and said could not connect. and when i go into the airport utlity it can't descover the base station even though it says it is connected with a full signal, im doing the excatly same things i did with my ibook but it just wont work. Please can someone help me and tell me what i have to do or give me some support this is my last hope as apple aren't intrested. I will be very gratful!

The software update was for Intel based Mac computers and does not specify Core Duo or Core 2 Duo:
AirPort Extreme Update 2007-001
This update is recommended for all Intel-based Macintosh computers and provides compatibility with AirPort Extreme base stations and networks.
This is the update that generated a fix at www.macfixit.com because some folks have been having issues with connection with their internet provider and some people have had issue with their airport systems just shutting down.
It was part of an auto update that was received. One of my Macs is a MacBook Pro Core Duo (not Core 2 Duo) and this upgrade (download) was part of the update check that is automatically performed.

Please help with graphic card

hey guy i have a problem picking a graphics card that is compatible with my computer i have a pavilion a6030n specs are
Chipset
GeForce 6150SE nForce 430
Motherboard
Manufacturer: ECS
Motherboard Name: MCP61PM-HM
HP/Compaq motherboard name: Nettle-GL8E
my psu is only a 300 watt i only want a card to make my desktop like a home theater hd/bluray movies no gaming i want it to support 1080p full hd and have a hdmi output. is there any card like this that i can just install with out upgrading my psu please help thanks

Please help. I am confused. I have the same specs as the original poster and am also looking to upgrade my system, but i'm confused. The video card you recommended appears to be 512MB, however, HP's specs for the motherboard state:
Integrated graphics using nVidia GeForce 6150SE
Up to 256MB (with 512MB or more system memory)
Also supports PCI Express x16 graphics cards*
So, if it says it supports up to 256MB, should i limit my search for a new video card to only ones that have 256MB, or will a 512MB one, like the one you recommened, also work?
Thanks.

MSI to 1109 wont work. deploy issues. what do i do

I have been deploying Adobe Reader 11 and uppdates the easy way. Downloaded AdbeRdr11000_nb_NO.msi from the Adobe FTP server and deployed it with active directory, no issues.
So I have updated this package the "easy way":
1. Downloaded the MSP from the ftp, and used the command "msiexec /a AdbeRdr11000_nb_NO.msi /p ****.msp
2. Renamed the msi file and uploaded it to the server and added it in the Active directory as an update.
This worked great included 11.06, after 11.7 I get the message "acroext.exe" cannot be installed because the file cannot be found in the cabinet file "Data1.cab" . This could indicate a network error, or an error reading from the cd-rom or a problem with the package.
I have tried to update from 11.06 to 07,08 and 09 and same issue.
I see there are other ways to download the exe/zip package and extract files/msi and update adoberdr.msi and deploy in another way, but haven't looked much into that, since the way it was working before was easy and doing the job.
Please help.
It would be much easyer if adobe just could upload .msi's with the updates.@

If the battery was empty then it can take up to 15 minutes of charging before it will respond. If it's been longer than that and it won't switch on then try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Please Help :) MSI NX8800gt Card Wont work on MS-7255

Similar Messages

Maybe you are looking for