Please help, my Canon Image Formula P-215 will not work w/ Mavericks

Please help, my canon image formula p-215 will not work w/ the new mavericks upgrade, is there a work around?

I ran into the same problem, I posted what worked for me in another topic in this forum:
https://discussions.apple.com/message/25208435#25208435
Hope it helps

Similar Messages

PLEASE HELP! BB CURVE 8520 EMAIL AND BBM NOT WORKING! :(

Ok, i would really appreciate it if someone could help me with my BB curve. i've tried the shop i bought it from and many other people and all ive been told is to send it away to be fixed. i really need my phone every day and dont want to send it away so im trying for a quick fix kind of thing, thanks to anyone who replies.
My blackberry was bought in October 2010 so its not old, from an o2 shop, it was working completely fine and great up until about 1 month ago.
i was trying to get onto the internet and a message came up saying 'unable to connect to server please contact service provider or try again later' or something similar to that.
from this appeared my phone is no longer receiving or sending any emails from or to anyone at all and my blackberry messenger has also stopped working.
i can open my email and bbm but when i open my bbm i type out my message and hit send and the message sends with a tick to show this but the little D for delivered never appears and my friends are not receiving my messages and im not receiving their messages either.
my phone says its connected to the internet and wifi, at the top of the screen the signal is full and it says EDGE most of the time or sometimes GPRS. i dont know what's wrong but its so annoying
i know this message is long but i want to give all details so someone can help me properly, ive tred resetting pulling the battery out, deleting and resetting up my wifi and all that, can anyone please help me? thanks so much if you can! its much appreciated! i can upload an image of what my screen says if it helps just let me know!
Melissa_Ball

Hi, I'd recommend checking to make sure that you still have a Blackberry Data Plan by contacting your Network Provider (i.e O2)

Please help me my iphone 4 switch off and not working

please help me my iphone switch off and not working

Hello safaabh,
I would be concerned too if my iPhone would not power on. I found an article with steps you can take when you encounter an issue like this. I recommend following the steps below:
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 15 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
You can find the full article here:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Thank you for using Apple Support Communities.
Best,
Sheila M.

PLEASE HELP ME. 12.1.1 itunes does NOT work for my windows 7 64 bit

I have read all the tutorials on here and elsewhere online and nothing works. My cousin goes to school for MIS help and she couldnt even figure out whats going on.
I HAVE DONE THIS NUMEROUS TIMES!
- Made sure my windows had all the necessary updates and everything was installed.
- I uninstalled ALL itunes products in the proper order according to apple discussions.
- Went through all the folders in program files.
- Reinstalled it and I get an error message. ( Apple mobile device service (apple mobile device service) failed to start. Verify that you have sufficient privileges to start system services )
- I have gone through the Services window and tried stopping and restarting the program but I get an error message. (Windows could not start the Apple Mobile Device Service service on Local Computer - Error 1053: the service did not respond to the start or control request in a timely fashion) I have gone through all the start and stop tutorials and none of them have worked.
- I have tried clicking ignore and sometimes it finishes installing but then gives me an new error message. ( iTunes was not installed correctly. Please reinstall iTunes. Error 7 (windows error 193) - I tried reinstalling and nothing.
- I tried finding the ituneshelper download but couldnt find it, I've also tried repairing and nothing works.
- I had downloaded and older version of itunes a few days ago that WAS working the 12.1 version (NOT 12.1.1) but then my cousin came to see if she could fix it and now I can't even download that version.
I am OUT OF options and I dont want to have to spend the money on support. Can some one PLEASE HELP ME!!! I have been trying to fix this for days.

Hi Thank you, the apple mobile service links did not work, i had tried them all. however that same link with the previous versions worked. I had to download the one below and I can at least use itunes.
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
I tried this one but it did not work.
iTunes 12.1.0.71 for Windows (64-bit) - itunes6464setup.exe(2015-01-28)

Please help!! ipad is disabled and will not do a hard reset to go into recovery mode.

i cannot do a force reset... When i hold in the home and sleep/wake button nothing happens, I have tried these same steps over and over again. Neither the apple or the itunes logo ever pop up.. The screen just stays black. I recently replaced the digitizer after my son cracked the screen. I have made sure that nothing was injured during repair. I did put the digitizer ribbon in wrong and then the screen was not working correctly. I had put the ribbon in backwards. So after the first wrong installation of the digitizer, i tried to unlock the screen with my passcode but it obviously wasn't working.. i would touch the number for the passcode but the screen would respond somewhere else..so i kept getting the passcode wrong and then BAM! Ipad disabled.. so i took a break from the frustration... When i returned to my ipad i took it back apart and thats when i realized that i had the digitizer ribbon in backwards, so i fixed it and replaced the screen once again.. But now the ipad is disabled, and for some reason it will not respond when i try to shut it down all the way, no red slider at all...so i bout a apple data transfer cable and i tried to connect it to itunes and hold the buttons like i read to do in the article, and my computer recognizes that my ipad is there,,, it tells me that i have to allow access and to respond on my ipad.. but sadly i cannot.. nothing appears on the ipad.. it stays a black screen and then when i lt go the "ipad is disabled" screen comes on.....
Then i read online that i could restore from icloud.com, so i go there, i sign in just fine but my ipad is not listed in the devices there either... it says " No Devices, You must be signed into iOS8 settings or Mac OS Yosemite system preferences to see devices."
And i dont believe the ipad is up to date, it had been unused for about 2 months, until last week when i attempted to fix it so im sure the operating system is old :-(
So im totally lost, I dont have a clue what to do to get my device recognized. I would really appreciate any help that anyone can give,, Thank you so much in advance!!!
Ipad 2 wifi 16gb

If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

My canon image runner 1025if machine will not send or receive faxes?

What can I do to fix this problem? The phone line is working fine ,I am sure it is in the phone line.

Have you tried to install some 3rd party image printing SDK to help you fix it? I am not sosure about it but I hope you success. Good luck.
Best regards,
Arron

My iphone wouldnt stop restarting so i backed it up and restored it but when i did i had NOTHING on my phone i lost all my contacts my 1,700 photos my texts, emails please help me i have a time machine, will that work?

I restarted my iphone after it wouldnt stop restarting every 5 seconds so i plugged it into i tunes backed it up and restored it but when i did my phone had no data and that back up i made is gone... is there anyway i can get this back please eveything is gone, 1,700 photos 500 contacts all my emails and texts. i have a Time Machine can i restore itunes that way and have it?

I suggest plugging your iPhone into a wall socket, and letting it sit for many hours (while connected to WiFi).

TS1363 Please help my phone just went black and will not go on.

Help my phone went black and do not whant to switch on i bought this phone 3 weeks back vrom a lady and gave my samsung s4 to my wife se will kill me if i ask her for new phone the pone.

You sure the battery is not out of power?
Try doing a Restart/Reset. In this case, it would be the Reset procedure if it does not turn on normally.
http://support.apple.com/kb/ht1430

I have a Toshiba e-studio 2830C network printer and it will not work with mavericks. I have some software that the printer guy said to try that was for a newer model printer, but it is not working. Please help....I need this printer tonight.

the Print Mode has a line through it and says it has not been updated.
How do I even install new printer software,I went throught the install process but for what ever reason it is still not working.
Aloha
David

Please look at Reset Printing System feature

Please help if you can, my user ID will not log on and it has all my data in it.

The primary user ID (an admin ID with all the valuable info I need access to) will not log on from a restart or initial power up. I was able to go into another user admin ID once and change its password which got me in once but now no passcodes will work.
The primary admin user will not log on at all. it doesn't give any error messages. It just flashs for a moment and then goes back to the user selection screen. I have the same apple ID on my iphone and can access all iCloud items associated with it. Just the user won't work. Another admin user and guest user work fine.
Before the user crashed we had some internet issues where it wouldn't log onto our shared network at our complex which has about a dozen registered users associated. Some sources have suggested that we were hacked and that security problems have shut down that user. We were in the British Virhin Islands when it happened. We are in the US now and the other user IDs are still working gone and the new Internet source was picked up through wifi without any trouble.
There is is so much info In that user ID that we need access to. I tried to use timemachine through the other admin but it will not reset through it. I have an external HD time machine backed up as of Feb 15 which would get us back most of the data, but I can't seem to reload that info either. Should I wipe out the whole system and start again? Maybe just erase that user? I'm not sure how to even do that...
thanks for for any and all assistance!

OS X 10.7 Lion, 10.8 Mountain Lion, 10.9 Mavericks and 10.10 Yosemite
Reset Password
Start the computer,then press and hold down command and R keys to start into recovery partition.
When you see the Apple logo, release the keys.
Wait until OS X Utilities window shows up.
Move the mouse to the menubar at the top and click "Utilities", then select "Terminal"
from the drop down.
Terminal window will appear.
Type in resetpassword and press enter on the keyboard.
Leave the Terminal window open.
Reset Password Utility window will open with Macintosh HD selected.
Select the user account from the popup menu box under “Select user account”.
Enter a new password.
Reenter the new password for the user.
Enter a hint.
Click the "Save" button.
Click  in the menubar and select Restart.
Log in.
If Keychain dialog box appears, select “Create New Keychain”.

PLEASE HELP! XMS 3200LL 256*2! WILL IT WORK?

Hey guys, I have been having nightmares with my Samsung True pc2700 (samsung chips). Instabilities, beeps up the ying yang...etc. Now I ordered 2 matched xms 3200LL ram modules. These are top of the line. I am wondering if anyone has any experience with this type of ram and K7N2Delta-ILSR mobos? Are they known to have any issues? I sure hope not!

hello like i said some other time go to de specs page on msi about this mobo, mayy be a memory density trouble, nforce can be some sensitive to certain memory modules, in corsair, and samsung i had see some troubles sometimes try with micron, kingstone, mushkin,

Canon scanner (Canoscan 8600F series) will not work after OS upgrade.

I used the scanner when when it was 10.6 just fine and 10.7 but as soon as I upgraded it to 10.8, it wouldn't. Officially the website supports up to 10.6. I don't know how it worked on 10.7. Now, it doesn't even recognize the scanner.
One thing was I did wipe out the drive and re-install the OS because OS upgrades would perform better. Trying to re-installing the older drivers don't help.

First, Canon (and a few other printer and scanner) drivers are distributed via Apple's software updates.
Then, 10.8.2 requires many if not most apps and drivers to be updated. If you just upgraded to 10.8.2, the newest drivers should be included, otherwise they should show up once you run Software Update.
Alternatively, you can check http://support.apple.com/downloads/ for the latest and greatest.
However, it appears that your scanner is not (yet?) supported in 10.8.2. Check here and follow the link there: http://support.apple.com/kb/HT3669#canon - your scanner is not listed.
Note that it's Canon's job to provide the drivers, Apple only helps distributing them. So, you may want to contact Canon and ask them, then sit and wait... sorry...

HT3258 The scanner on my Canon inkjet printer MG6200 series will not work with Mountain Lion. How can I fix this?

The MP Navigator software in my scanner cannot be opened since I installed Mountain Lion. Canon say they don't have a way of fixing this, so is there a solution out there I wonder?

I have the MG6250 and MP Navigator v5.0.2 is working on my 10.8.2 Mac, so I don't know why the Canon support is telling you that it cannot be fixed.
To use MP Navigator you must have the full scanner driver installed. And when it is installed you then need to configure MP Navigator to use the networked MG62xx.
Also ensure you are using the latest version of MP Navigator. Try trashing the one you currently have in Applications > Canon Utilities and then installing this latest version.

Need Help...my wireless airport express will not work with my update of snow leopard

after installing snow leopard on my macbook pro my airport express will not work...or will connect only for a minute at a time.

If you mean by "airport express" the square airport router you plug in and has a usb port then run the Airport Utility located in your Utilities folder to set it up again. If AU doesn't see it you may need to do a re-set of the AE.

Help: Shuffle recognized/charges on PC, but will NOT WORK when ejected!

Hello,
My 2 year old shuffle suddenly doesn't work! I've tried the "five R's", used the Device Manager to reinstall the driver, or whatever, when it was plugged in, and restored it tons of times. The only thing I haven't done is completely uninstall/delete iTunes and reinstall, or used the original CD software for a restore.
The iPod is recognized with no problems when plugged in; I can add and delete songs, and let it charge. But when I eject it and take it out nothing works, nothing at all!
Any suggestions are greatly appreciated!
Thank you.

Are you saying the iPod dies as soon as you remove it from any sort of external power source such as a USB connection to your PC? If so, it's likely that the iPod's battery is dead and in need of replacement, especially since the iPod is an older 2G model that has been around for some time.
B-rock

Please help, my Canon Image Formula P-215 will not work w/ Mavericks

Similar Messages

Maybe you are looking for