Please help my desktop images, wallpapers gone.

Please community i need your help. I restored my computer from Lion to lion, before i had Leopard and i had all my favority desktop wallpapers, for example aurora , earth horizon , earth etc.. When i installed for the first time Lion , i got even more desktop images for ex. Aurora at grey or blue colors those i loved so much . I am so new to mac's ok i did not even know where my folders were, i even wanted to get the same background images for me phone too ^^. But when i did a restore from Lion to Lion means that i erased(and i forgot to backup or search for the desktop images on my mac it was to late ) my disk and got the install all over again , all my desktop wallpapers were gone. Now please if possible for some1 to sent me if he got upgraded from Leopard to Lion and did not erased or kept a backup of desktop images, to simple sent me the folder with all the descibed images i mention, i would be very happy again thank you.

have had the same problem. also not a computer buff - mine had not been in for work when it would go to sleep after i had shut if down. happened a few times then i lost photos, lots of them. took it to local APPLE repairs and they found nothing, 21 days later.
last night it did it again - powered off at home and sleeping when i got to the office.
any advice?

Similar Messages

Please help, my Canon Image Formula P-215 will not work w/ Mavericks

Please help, my canon image formula p-215 will not work w/ the new mavericks upgrade, is there a work around?

I ran into the same problem, I posted what worked for me in another topic in this forum:
https://discussions.apple.com/message/25208435#25208435
Hope it helps

Please help my email boxes have gone .i am not very technical so need very simple words.

Please help my email boxes have gone .i am not very technical I am the older generation.

Lyndaneedshelp wrote:
Thank you for replying . I do not have the all mailboxes in the left hand side of the email page. I cannot go to any of my mailboxes . I am receiving mail but the can put them in the boxes but cannot go into the boxes. Hope I am making sense. I am not very technical older generation. Thank you
OK. Sounds like you are simply below the top level of the Inbox menu. Look at the upper left of the mail box list. You should some text (what exactly will depend on where you are) precedded by an <. Tap on that until you return to the top of the list.
Also - Phil could very well be correct (hard to say with being able to see your screen).

Please help, my ipad mini is gone into to recovery mode after updating to iOS8.1 and even though I restored it through iTunes it still will not come out of recovery mode

please help, my ipad mini is gone into to recovery mode after updating to iOS8.1 and even though I restored it through iTunes it still will not come out of recovery mode

Try a Reboot press & hold menu button & power button hold both down until you see Apple Logo you will not lose any data. But you may need to do this more than once. I never use PCs for software upgrades or downloads I always use wifi had no problems with iOS 8.1 B sydd

Please help : invalid fiasco image header , and %...

yes i'm getting these 2 messages, i'm just trying to reflash but i can't, please help me, i tried changing the name of the images, adding .bin ( on xp ) ... but i just can't reflash please help me, i tried these on win7 32bits, and on xp sp3, i'm getting the same thing please can someone help me . note : my device shows the nokia logo, usb logo..... without a backlight, they are all dark, please guys help me .
Reality is wrong....dreams are for real... 2pac .
don't forget to hit that green kudos
Solved!
Go to Solution.

I've been really busy with work.. really really busy.. hopefully this week might start to get a bit quieter..
Right..
%m means "File not found or bad file name"
when you run "flasher-3.5 -F os.bin -f" flasher wil be looking for a file called os.bin.. If it can't find os.bin, it gives you the error %m
Why does it say %m and not something clearer? That's because of a bug in Nokia's software!
Ok.. Did you download the zip file I sent you? If so here's how I think we can do this:
Step 1) Open a CMD window
Go to the start menu, select run then type CMD
A black cmd window will pop up.. in that window run these commands exactly:
cd %ProgramFiles%\maemo\flasher-3.5
start .
A windows explorer window will appear. Move this window out of the way.. BUT don't close it
Step 2) move the bin files
Find the zip file you downloaded.. double click to open the file
Inside you'll find two bin files
Drag both files from the zip file into the explorer window that popped up in step 1
Now close the zip file window
Step 3) rename the bin files
In the windows explorer window into which you dragged the bin files, you have to rename the files
Click on
RX-51_2009SE_10.2010.13-2.VANILLA_PR_EMMC_MR0_ARM
and rename (press F2) the file to emmc
Click on RX-51_2009SE_10.2010.19-1.003_PR_COMBINED_003_ARM.bin
and rename (press F2) the file to os
Step 4) flash the files
unplug and turn off your phone
In the black cmd window run this command
flasher-3.5 -F os.bin -f
flasher will pause saying "waiting for suitable device"
Press and hold the U button on your phone and plug it in via usb.. you can let go of the U button when flasher starts doing something
Once flasher has finished (it will say "completed successfully") you can continue:
run this command
flasher-3.5 -F emmc.bin -f -R
That should be it

Please, Please Help Me (.gif Images)

Hello,
I want to cry, I've been trying to include .gif images in my swing applications but am having big problems. I've been reading the forums and trying everything. If I try the most basic of examples just to get it working I still have problems. The code compiles correctly and the panels appear but no pics. I've tried including every different file path version, moving .gifs to different folders, what is the problem, why no pics. I'm running J2SE v 1.4.1_02, please help, I would be so greatful, don't make me cry,
Lucy
import java.awt.*;
import javax.swing.*;
public class JFrameImage extends JFrame
public JFrameImage()
Container c = getContentPane();
JPanel panel = new JPanel()
public void paintComponent(Graphics g)
ImageIcon img = new ImageIcon("globe.gif");
g.drawImage(img.getImage(), 0, 0, null);
super.paintComponent(g);
panel.setOpaque(false);
ImageIcon icon = new ImageIcon("cat.gif");
JButton button = new JButton(icon);
panel.add(button);
c.add(panel);
public static void main(String[] args)
JFrameImage frame = new JFrameImage();
Image onFrame = Toolkit.getDefaultToolkit().getImage("icon.gif") ;
frame.setIconImage(onFrame);
frame.setSize(200,200);
frame.setLocation(300,200);
frame.setDefaultCloseOperation( EXIT_ON_CLOSE );
frame.setVisible(true);

sorry but I think it should be something else.
To locate a File you need it's full name, including the extension. Maybe since the extension wasn't showing it's actual filename was cat.gif.gif? I don't know. Anyway, this is a method I use for all my image retrieving, just put it in some Util-class: private static HashMap hmImages = new HashMap();
public static ImageIcon getImage (String name)
    if (hmImages.containsKey(name))
      return (ImageIcon) hmImages.get(name);
    String url = System.getProperty("user.dir") + "/resources/" + name;//or any other directory were all your image-files are under (even in subs, in that case add the subdirectory to the arg name
    try
      ImageIcon ic = new ImageIcon (url);
      if (ic != null)
        hmImages.put(name, ic);
        return ic;
    catch (Exception e)
    System.out.println("Warning: image '" + url + "' not found");
    return null;
}greetz,
Stijn

Please Help me on Image Scaling!!

I am trying to get a map.jpg to scale to fit the window while still able to zoom in & out with mouselistener(which where I clicked). I am able to zoom in & out but the coordinate is according to the original size. Please help.

1.I am not familiar with Graphics & Graphics2D. The Following code have problem in showing the map in BufferedImage, which is plotted with small dots on it. Actually, it's the Graphics & Graphics2D coding problem that I am facing. I don't know how to use the function.
import javax.swing.*;
import java.awt.event.*;
import java.awt.*;
import java.net.*;
import java.io.*;
import java.util.*;
import java.awt.image.*;
import java.awt.geom.*;
public class GPSMap extends JPanel
private Image map,scaled;
private double zoomfac=1;
private BufferedImage bufi;
int zoomcx,zoomcy,zoomh,zoomw,w,h,newHeight,newWidth,newx,newy,newcx,newcy;
public GPSMap()
System.out.println("Loading GPSStatus");
this.setLayout(new BorderLayout());
map = getToolkit().getImage("Map3.jpg");
MediaTracker track=new MediaTracker(this);
track.addImage(map,0);
try{track.waitForID(0);}
catch(InterruptedException ie){}
w=map.getWidth(this);
h=map.getHeight(this);
bufi=new BufferedImage(w,h,BufferedImage.TYPE_INT_ARGB_PRE);
newHeight=650;
newWidth=(int)(newHeight*w/h);
scaled=map.getScaledInstance(newWidth,newHeight,map.SCALE_SMOOTH);
addMouseMotionListener(new MouseMotionAdapter()
public void mouseMoved(MouseEvent m)
     System.out.println("Move at ["+m.getX()+", "+m.getY()+"]");
zoomcx = m.getX()-(zoomw/2);
zoomcy = m.getY()-(zoomh/2);
     newx=(int)(m.getX()*newWidth/w);
     newy=(int)(m.getX()*newHeight/h);
     newcx=newx-(zoomw/2);
     newcy=newy-(zoomh/2);
if (zoomcx <= 0)
zoomcx = 0;
if (zoomcy <= 0)
zoomcy = 0;
// if (zoomfac != 1)
// repaint();
repaint();
The following part is an extra but cannot do it.
addMouseListener(new MouseAdapter()
public void mouseReleased(MouseEvent m)
if (m.getModifiers() == InputEvent.BUTTON3_MASK)
zoomfac = zoomfac - 0.21;
else
zoomfac = zoomfac + 0.21;
     if (zoomfac <=1)
     zoomfac=1;
repaint();
public void paint (Graphics g)
GPS3 s3=new GPS3();
super.paintComponent(g);
Graphics2D g2 = (Graphics2D) g;
g2.setRenderingHints(RenderingHints.KEY_RENDERING,RenderingHints.VALUE_RENDER_SPEED);
Graphics2D gc=bufi.createGraphics();
gc.setColor(Color.red);
for(int i=0;i<=s3.ix.length;i++){
     gc.drawRect(s3.iy[i]-1,s3.ix[i]-1,2,2);//For plotting purposes, but not yet finish
gc.drawImage(scaled,50,50,this);
gc.drawImage(bufi,zoomcx,zoomcy,newcx,newcy,100,70,this);
P.S. I don't know how to change it to runnable application. Please help.

Please help! My screen has gone blank, and more problems!

Hi, I hope someone can help!
1) Yesterday, I was listening to my ipod and changing the songs, when it suddenly the songs began changing on shuffle every second mid-song!
2) Eventually it stopped, but then it really slowed down and would take about 5 seconds to react to me pressing the buttons or changing a song!
3) Then today, after I had finished using it whilst running, the screen went completely blank, but the music was still working fine. The screen is now still blank, unless I tip it vertically and then I can just about make out an extremely faded outline of the wrting and page format. Also there now appears to be a white smudge/mark on one side of the screen!
What is happening to my ipod and what can I do about these problems? I have had my ipod for only a couple of months!
I would be very grateful of anyone could help!
Thank you,
Inass (London)
nano Windows XP

Please help my ipod will now not even switch on! What should I do?
Hi, I hope someone can help!
1) Yesterday, I was listening to my ipod and changing
the songs, when it suddenly the songs began changing
on shuffle every second mid-song!
2) Eventually it stopped, but then it really slowed
down and would take about 5 seconds to react to me
pressing the buttons or changing a song!
3) Then today, after I had finished using it whilst
running, the screen went completely blank, but the
music was still working fine. The screen is now still
blank, unless I tip it vertically and then I can just
about make out an extremely faded outline of the
wrting and page format. Also there now appears to be
a white smudge/mark on one side of the screen!
What is happening to my ipod and what can I do about
these problems? I have had my ipod for only a couple
of months!
I would be very grateful of anyone could help!
Thank you,
Inass (London)
nano
Windows XP

Opening Robo Help and saved image is gone

When I insert and image into Robo Help and save and close the program, when I got back in the image is missing, but a large square is in its place. All the text is moved below the image, it seems to still be referencing it but I can't see it. When I originally insert it, it is in the correct place and sized correctly without me doing any adjustments to it. Then when I re-open robo help it is gone, any suggestions?

Please see the sticky thread Before You Post at http://forums.adobe.com/community/robohelp/robohelp_html
You haven't told us what version of RoboHelp you are using.
Also is your project saved locally or on a network drive?
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Please help! My shuffle has gone totally up the shoot!

Hi everyone, I seem to have developed a rather major problem with my shuffle and I don't know how to fix it.
Since I got my shuffle I've been using it on my work computer then I got a new work computer and it was some weeks before I could reinstall itunes - I finally did that a couple of days ago.
When I reinstalled itunes it asked me if I wanted to update to the latest version which I did.
When I plugged my shuffle in the name came up in itunes as 'DATA' which wasn't the name I'd previously given it.
When I tried to update the music it said it was doing it but it seemed to happen too quickly and when I checked it hadn't changed the music. It tried several times with no luck.
I downloaded the latest ipod software and restored my shuffle, when itunes opened up I renamed my shuffle and tried to add new music. It said it was doing it but again seemed to be doing it too fast and when I checked there was no music on the shuffle.
So I re-restored it and did all the same stuff again...with the same results.
Finally I restored it for a third time at which point it my computer stopped recognising it at all.
Now:
* when you press play on the shuffle the green and orange lights flash.
* my shuffle doesn't show up in itunes
* doesn't show up in my computer (it never did in the first place though)
* my computer won't recognise it if I try to restore or update it.
* finally today I've tried reinstalling it from the original disc that came with it but my computer doesn't even recognise that my shuffle is plugged in when it asks to check if it's formatted.
Yes I'm using a high speed cable and yes I've tried reinstalling itunes and the ipod software - several times.
I don't know what else to do - please, please can anyone help or suggest anything or tell me where I can get this fixed?

I replaced my first shuffle two weeks ago after installing the 1.1.2 software (haven't seen any bills and don't expect to either!).
Sadly i didn't realize it was the software update that caused the burnout so i updated the new shuffle when it arrived (after two days actually - nice service) resulting in another burnout.
This is how i described the problem to apple:
Dead Unit / Continious
Green/Amber light flicker when pushing play. The iPod Shuffle is recognized as a "Removable Disc" but Windows XP reports the following error when trying to access the device: "The request could not be performed because of an I/O device error." - rendering it unusable.
Reinstalling iTunes and iPod updater doesn't help. The iPod Updater can't initialize the device and iTunes doesn't recognize the iPod Shuffle at all! Neither PCs or Macs recognized the device properly. It's dead!
I just reported this second dead shuffle and expect a new one in a few days. Next time i'll leave the default software intact and only update with iTunes previous to version 5.x
I'll report back as soon as i know if this is a solution or not.
The best of luck to the rest of you unlucky shuffle owners

Please help, cannot compare images in full screen mode

I am not able to compare 2 images in full screen mode. I am using a MBP and a ACD 23". The main image will remain in the ACD while the image being compare is being shown in the MBP.
I am able to compare images in the viewer mode.
My main display is the ACD 23 which I selected using the display preferences under 'Arrangement' with the menu bar located on the ACD. In Aperture, Secondary Viewer is set to Blank.
I had also tried different combinations of Main Viewer and Secondary Viewer settings but was not successful.
Am I missing something? Anyone have the solution?Thanks in advance for any help.
norheng

Anyone have any suggestions to using Aperture to edit images using a MBP and ACD so that it best utilize Aperture full screen mode in comparing and narrowing down to the pick.
I am now trying to use the MBP as the main display and ACD as the secondary. This way I am able to compare images with the MBP in the Browser mode and the ACD display the compare images full screen. It work with the secondary display - ACD set to mirror, span and alternate mode.
It would be best if only one screen is use and hence save energy consumption (reducing global warming and bill, if it help).
Thanks in advance for any suggestions or and solutions.
norheng

Please help to load image in the database

Hi to all. ....
I need to save image file in the database thru forms ...
I have some image file in the application server and I need to load it in the database in a Blob col..
Any help ... ??
Thank's in advance

Hi!
Your forms version is very important.
If you use forms 10g and you want to load the image on the client, you need webutil.
If you use forms 6 or you want to load the image from the application server to
a image item in your form, you can use the read_image_file forms build-in:
read_image_file ( 'x:\path\image.jpg.', 'JPG', 'block.image_item' );On forms 10g this will be executed on the server and the filename and path has to be
a physical place on your servers harddisk.
The image item has to be an item of type image and must be assinged to a blob colum in your table.
Regards

PLEASE HELP! Darwin/bsd is gone? But new problem!

Okay, here is the story.
I came home after a trip and I was presented with the Darwin/BSD problem. Well I did what the other threads said and checked my log. My log said things like "authorization failed" but no "exiting to consol" There were PAGES AND PAGES AND PAGES so I didn't check it all. I figured i'd take it into an apple store or something... So I waited about a week. Then I turend it on again and BOOM. I was presented with "Choose your language" as if my Apple was completely restarted. Well I got really excited and told it english, and watched the welcome video.
Then I picked my country...
And then..
It said "Do you already own a mac?"
And I had three choices
"-Transfer my information from another mac
-Transfer my information from another partition on this mac
-Do not transfer my information"
Well see this is where another problem starts. See.. I don't KNOW if I "partitioned" my hard drive.. I sort of doubt it, unless its like automatic.. Well I surely didn't want to "NOT transfer" my information, so I clicked the partition one, and it went to a screen where it began searching. WEll it searched...
and it searched...
and it searched...
For days, hahah.
I finally gave up and FORCE turned it off because the GO BACK button would not work...
This same thing happened twice, and at this very moment I'm at the same screen asking me how I want to transfer my information.
And let me tell you this- I CAN NOT lose this info on my computer. It is some of my most valuble documents... so PLEASE, PLEASE someone help me. Do I say "Do not transfer" amd it will already be on there? Or do I take it to the apple store and get them to retreive my harddrive information somehow in single user mode or something.
Gosh, please helpp
IMac G5 Mac OS X (10.4.7) no isight
IMac G5 Mac OS X (10.4.7)

Choose not to transfer your information, and then create a new account with the original short name. If you previously created multiple accounts on the system, recreate them all in the same order they were initially created. None of your data will be erased.
(15252)

PLEASE HELP MY MUSIC IS ALL GONE!!!!!!!!!!!!

Ok well i got a new computer and i tried to transfer the music from my ipod to my itunes account. but before i didthat i downlaoded a nother song. so when i triede to sync all my music from my ipod and itunes account r gone. plz help me

Sorry, but officially Apple does not allow redownloads of purchased items. It's your responsibility to make backup copies in case something goes wrong with your system, as unfortunately it apparently did in your case, and you lose all the information on your hard drive. If you haven't made a backup, and don't have your tracks on an iPod, you're probably out of luck and will need to repurchase your tracks.
You can try contacting iTunes Store Customer Service and explaining what happened. Reportedly in some cases Apple has allowed redownloading on a one-time basis, but don't count on it.
And for the future, you'll want to back up your tracks as soon as possible after purchasing them. Then you won't be in this same situation should your computer crash again.
Good luck.

Please help me! I have gone through the steps for installing the newest version of Flash Player (at

least a dozen times and it says it is installed but afterwards, it is not. HELP!

first, uninstall fp, http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-windows.html
then manually download and install the latest fp, http://www.adobe.com/products/flashplayer/distribution3.html

Please help my desktop images, wallpapers gone.

Similar Messages

Maybe you are looking for