Please Help, My ipod is stuck in disk MODE...

My ipod is stuck in disk mode, I try to reset it but it doesnt work. I tried using ipod updater to restore it, but i only get "Firemare update failure. Disk write error." If you have any suggestions please post

Well my itunes doesnt even read my nano. Right now all I want to do is just restore it but...it keeps saying "Firmware update failure. Disk write error." So how do i restore my ipod if i keep getting this error?
Oh yeah, the reason my nano is in disk mode is cause my pc restarted while i was uploading music into it.

Similar Messages

  • My ipod is stuck in disk mode when connected to computer.

    Hello, my iPod is stuck in disk mode when I connect it to my computer. iTunes will not recognize the device is connected, but it still shows up in my computer. When I restart the iPod, it tells me to go to iTunes to restore, then immediately shuts off. How can I restore it?

    Please see the  More Like This  section on the right.

  • Help! My iPod is stuck in disk mode!

    So yesterday my computer didn't recognize my iPod. I followed different directions but non of them seemed to work. Then I put it into disk mode. Now the only way to put songs on my iPod and charge it is by putting it into disk mode. Now it's stuck there. Everytime I try reseting it will stay on the apple logo screen. From there all I can do is put it back in disk mode.
    Help me get it out of disk mode and load songs normally! I would be very grateful!
    30GB iPod   Windows XP  

    Xox: Rather than reset....Restore your iPod.
    To turn disk mode off, open iTunes with the iPod connected, edit/preferences/ipod/music. Enable disk mode is at the bottom. If it is greyed out, change your Music update option to manual, uncheck enable disk mode and then set your music update option back to what you want.
    David

  • IPod Nano stuck in DISK MODE - HELP!

    How do I get my iPod Nano out of DISK MODE?
    When I went to turn it on it was in DISK MODE. How did it get set to DISK MODE?
    Thank you.

    Thank you, it worked just fine. I guess Apple has replaced operating instructions for these forums! Again, thanks for the help.

  • Ipod nano stuck in disk mode and reset mode

    My ipod which I haven't used for long came into my sight and i triedto use it and the battery was out. OK, so I charged it through my computer Windows XP with the usb. Of course my itunes program detected my nano. And it kept telling me to upgrade my nano so I clicked OK. after 2or 3 mins it was completed and it said to wait until nano reboots itself. But it won't... so i pulled it out.
    Ok when i turned it on the gray screen with the apple logo in the middle appeared. It won't move anymore so I resetted it by pushing the center and the menu button and endless circulation began. 4secs later it blacked out and right after, the gray screen appeared again and again..until the battery wasout ..So I came here and knew about the center and play button so I tryed it worked so I was able to see my ipod on my itunes ,which did not appear before,and now it keeps on telling me to restore it because it was damaged. so I did. and now it came back as new. I wrote my new apod name ...etc. and after that I pulled it out. now it's stuck in disk mode and I can't move on,,,
    I'm sorry the article is long but please help me!

    Thank you, it worked just fine. I guess Apple has replaced operating instructions for these forums! Again, thanks for the help.

  • Ipod mini stuck in disk mode wont reset

    Hey,
    My iPod mini is stuck in disk mode, either displaying "ok to disconnect" or "do not disconnect" and won't reset.
    When connected to my PC, iTunes does not notice the iPod, although it does show up in "my computer". When I try to run an iPod updater to restore the iPod, it either takes forever and I end up pushing CTRLALTDEL, or it comes up with the error message "cannot mount iPod".
    I already know how to reset an iPod mini, having done it many times before. I've removed and reinstalled iTunes and iPod updater many times and it's making no difference.
    So what can I do? I've had so many problems with iPod mini since I've had it. Every couple of months I end up stuck in front of my computer trying to fix it. Can anyone help me, or is there a way of contacting apple for a replacement?
    Thanks
    PC   Windows XP  

    Hi
    First of all thanks for your reply, but...
    Please try to plug your iPod with the AC charger and press "select"+"menu" keys- to get out from disk mode
    OK, did that, now I get the folder icon, or if I then try to reset the mini, it goes back to disk mode.
    When I plug it into the PC now, it does kind of a loop. It goes from Mac logo to folder icon to "do not disconnect" to "ok to disconnect", then repeats. The PC is not recognising the ipod at all now.
    PC Windows XP

  • TS1441 Ipod classic stuck in disk mode

    My ipod classic is stuck in disk mode, computer/itunes won't recognize, i've tried resetting, but either says "ok to disconnect" or "restore with itunes."  When i plug it in, the computer nor itunes recognize that it's plugged in.... please help.

    The best way to get out of this situation is to use a well-known tool called TinyUmbrella.
    First of all download TinyUmbrella  http://thefirmwareumbrella.blogspot.in/
    Now, making sure your device is connected to your computer, launch TinyUmbrella
    It will automatically detect that your iPod is stuck in recovery mode
    Select the Exit Recovery button and it should throw your iPod touch out of recovery.
    Alternatively, you can right-click on your iPod name from a list at the side
    of TinyUmbrella and select Kick out of recovery.

  • Ipod is stuck in Disk mode

    I have reset the ipod twice, connected to my computer and Itunes, synced the device, yet it remains stuck in disk mode.

    Hold down the center button along with the menu button and then your ipod will turn of
    After that step has been completed and your ipod is switched off you turn your ipod back on but press the play/pause button so that it switches from disc mode to non-disc mode.
    Well then your ipod is back to shape and you can carry on listining to your music!
    Source: http://wiki.answers.com/Q/How_do_you_remove_the_iPod_from_disk_mode
    Hope this helps.

  • Ipod is stuck on disk mode

    hi
    my ipod nano is stuck on disk mode' i tried holding the menu and center buttons for a few seconds but it dosent help
    any other sujestions?

    Is the Hold switch in the OFF position?  Even if it is in the OFF position, try moving it to the ON position and back to the OFF position, as it says to do in the procedure document for a Reset
    http://support.apple.com/kb/ht1320

  • My ipod is stuck on disk mode...

    my ipod mini is stuck on disk mode and it says ok to dissconnect and when i disconect it is still says it wat do i do?

    Michael,
    Reset your iPod...
    http://docs.info.apple.com/article.html?artnum=61705
    btabz

  • Ipod photo stuck in disk mode and screen is in Black and white

    came to use my ipod photo after about a week of not using it. when i took it out the colour screen was in black and white and the screen is stuck to saying it is in disk mode with a large tick.
    the ipod will mount and does show up in itunes it will even play songs via itunes. i have tried resetting to no avail and my next option was to restore to factory settings which i am loathe to do as i have songs on my ipod that are no longer in my itunes library.
    anyone had similar issue or can suggest a fix
    thanks

    well the problem has been solved...hope this may help others having this issue.
    i basically just let the battery run out, then connected the ipod to my laptop and voila...it reset and all is well again...
    pretty random, but glad it is all working again.

  • My iPod is stuck in Disk Mode

    I have a 3 year old iPod and the other day I went to put it back in the docking station for a recharge and noticed no display of the Charging icon.
    When I pressed a button to activate the device I noticed a Icon of a Folder with an excamation point. When I connect it to my computer it sees that it is connected and Windows see it as a removable drive. The device displays that it is in DISK MODE. I am unable to browse the directories and it really locks my computer up when I try to access it.
    iTunes does not see the device. Windows see it as an APPLE Device.
    I am unable to do a reset from the iPod controls.
    I was able to open the device and remove the battery hoping that this would resolve the issue, but not luck.
    Please Help. I have some important docs on the drive that I need to get. All my music is backuped up so I am not to worried about that.

    Additional notes:
    Windows sees the iPod as a removable drive that is not a recognizable format. It sees two partitions 39 MB and a 18+ GB. The 18+ GB partition shows 100% available.

  • IPod nano stuck in Disk Mode

    my ipod froze on the apple logo screen so i found disk mode advice
    but how do i get out of disk mode or am i supposed to do something on the computer?
    i have enable disk use or whatever but that just makes it unresponsive
    help please!

    Hello thismac,
    In order to take the iPod out of Disk Mode, you will have to reset the iPod. To do this, press and hold the Center and Menu buttons together until the Apple logo appears. That should do the trick.
    If you are getting no response from the iPod while attempting to reset it, you may have to wait for the battery to die, then hook it up. If you can get it to appear in iTunes, it would be a good idea to restore it via iTunes as well.
    Otherwise, there really isn't much else you can do for an unresponsive iPod that you cannot reset or get iTunes to recognize.
    Hope this helps.
    B-rock

  • Help my ipod is stuck in recovery mode

    My ipod touch 4th gen is stuck in recovery mode. I have restored several times and it just goes back to recovery mode. What do I do?

    Restore loop (being prompted to restore again after a restore successfully completes)
    Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
    Next try placing in DFU mode and then restoring.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    Then try restoring on another computer.
    Last, make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • IPOD classic stuck on disk mode/recovery mode

    Hello
    I got a new Ipod classic for Christmas and when I hooked it up to Itunes it started adding some songs then froze as I had this problem with my old Ipod I restored it and was ready to begin again, then it started saying it was corrupted and after searching ways to fix this problem online I tried for a while to restore as prompted and fix it but then it went onto disk mode and now it's locked on that mode and I can't get it out of that at all. I put my old Ipod on this morning to my Itunes and it worked fine and synced as normal so now I know it's the Ipod. I've no idea how to fix this problem myself or why it started, I'm normally able to fix most of my technology stuff myself and all morning this has been stressing me out. I'm not sure where to send it for repair or how much it will cost at all, appreciate any help at all.

    I have the same problem. Have you figured out how to fix it? I'm going to my Apple store this afternoon to see if they can fix it. Thanks.

Maybe you are looking for

  • Problem in Releasing 46B IdocSegment in 640 SAPECC5.0

    Hi All, I have one Idoc segment which was created by some developer in 2005. This segment showing release 46B in WE31. Now SAP system is upgraded to ECC 5.0 and all the new created Idoc segments showing release 640 in WE31. But problem is that i have

  • Quicktime Pro Mpeg

    Before I purchase an upgrade to Quicktime Pro, I would like to know if by using Quicktime Pro, I can convert MQV video files to Mpegs or not. Thankyou for your time.

  • Is it possible to pass value between iView in a Workset?

    Dear all, I created 7 dashboards using VC 7.0. Each dashboard has his own model and iView. I like to add reports(iViews) for each dashboard so there is a list of reports on the left (detail navigation) column for each dashboard.  I created a workset

  • Version 8

    How do I get back Itunes version 8. My computer is not compatible with the new Itunes 10

  • W530 HDD/SSD detailed RAIL/TRAY info request

    My apologies as this may appear to be beating a dead horse.  However, I have called Tech support twice, Boulder IBM parts twice, and Lenovo Inside Sales twice.  Sales & this site were the most helpful.  I'm posting this as there seems to be some data