Please help: My MBP freezes when not connected to a power supply.

When I am working on my MBP (specs below) without it connected to the power supply, it will freeze every once in a while. I have no option but to hold down the power button to do a hard restart – and then it takes a good five minutes to boot back up.
Does anyone know what the problem might be? It NEVER freezes when it is connected to power.
BTW – the MBP freezes randomly, *sometimes the battery will be near full, sometimes only half full,* so I don't think it has to do with the amount of power left in the battery.
Thanks in advance for any replies.

there is definitely a problem Apple must solve, i have this issue too.
here is a thread i started
http://discussions.apple.com/thread.jspa?threadID=1775557&tstart=0
my mac is still out for repair, let's see if they are able to fix it.. i am not that confident so far..

Similar Messages

  • Help my ibook freezes when I connect usb devices

    Hi there
    I have had problems for weeks when I attached usb devices to my ibook. I have a usb (MAC approved) headset which caused the ibook to freeze when I connect it before or after startup. I also have a usb modem for a broadband connection which causes the ibook to freeze. The printer is usb also, but it only causes the ibook to freeze some of the time ????? I have run the hardware test disc, there were no errors. If anyone has any ideas I would really appreiate hearing them.
    Cheers

    Hi f,
    Try an SMC Reset: http://support.apple.com/kb/HT3964         

  • PLEASE HELP! ETHERNET CABLE IS NOT CONNECTING PROPERLY WITH FIOS ROUTER

    I recently purchased a time capsule to use in conjunction with my mac. When I am prompted to connect the ethernet cable from the lan port on my fios router to the wan port on the tc, the cable will not connect properly to the lan port on the tc. If I connect it from the lan on the fios router to the lan on the tc the green indicator lights up to indicate a connection but this does not help the wan port situation. I am able to locate the network I created from my mac but this tc network is not connected to the internet as indicated by the amber blinking light on the front of the tc. Also since creating this non working tc network, my fios signal is almost non existant! I am new to all of this so any help at all would be greatly appreciated!!!

    Don't worry about the cable. For now.
    Set the TC to bridge mode.. In bridge there is no wan port.. so you can use any port on the TC.
    Test with the TC plugged in FIOS.. use in turn all the ports to see if it will work.
    Do not change any setting but bridge the TC from default.. ie do not set extend wireless.. that will totally foul it up. Do not use join wireless, that will triple foul it up. Absolute default.. set TC to bridge... plug into the FIOS.. ethernet to any port that the light goes on.
    Do a snapshot of the TC setup from airport utility and post.

  • HT4623 Please help. My iphone can not connect to SIM card , I tried many times there is no hope.

    Today I updated my iphone , but when it finished , it can not connect with my SIM card I do not know why?

    What is the exact error message? Does it say that there is no SIM, or does it say that the SIM is unsupported or invalid?

  • Please Help! - MBP freezing after EFI 2.2 firmware update

    Hey guys. I'm hoping someone understands whats happening with my 2011 13" MBP (corei5, 4gb ram, 750 gig HDD)
    I updated the computer with EFI Firmware 2.2 and the most recent security update a few days ago.
    My computer will boot to my username fine.
    It immediately begins INDEXING (***!?) even though that obviously isn't needed.
    My HDD spins like crazy and I notice in activity monitor 3 things: Finder and MDWorker will user over 100% of my CPU, my RAM is completely used down to 3MB free, and my hard drive free space is going down slowly as i leave the computer on.
    Nothing will open, constant beach balls, the longer I leave the comp on the worse it gets.
    My fans will run on high to cool down the computer which is obviously working very hard.
    I have tried re-installing EFI 2.2 (didn't work), I have tried going back to 2.1 but Lion says its not compatible.
    I have re-set the PRAM, no luck.
    I have repaired disk permissions, no luck.
    The Guest account boots up fine
    The HDD is fine because it boots up in the same time as always and runs guest account fine, and my account for the first minute or two fine.
    Does anyone know WHAT IS GOING ON HERE? It's driving me nuts. Thanks for your help in advance.
    Dan

    My 2011 17" MacBook Pro was freezing up to 20 or more times a day after I installed the 2.2 firmware.  I created a new user account and even new partitions with 10.6.8 and 10.7.1 installed and they all would freeze with no other software installed.  I reset the SMC and PRAM.  Repaired the permissions and disk.  Nothing helped.
    Today I took it to the local Apple store (100 miles away lol) and of course they couldn't reproduce the problem in the limited time they had but they gave me a new machine so I can get back to work.  I'm still restoring from a backup so I have no idea how it will run but so far it's behaving and it is running from a CCC version of the drive that was in my old laptop and it has been solid.
    The lesson I learned is that I am going to update to 2.1 and skip the 2.2 firmware.
    BTW - Props to Alex @ the Apple store for all his help.

  • Itunes freezes when i connect my ipod classic 120GB, please help

    hello,
    I got a problem with my itunes/ipod, I believe it's my ipod.
    My Itunes freezes when i connect my ipod to my computer (windows 7 Professional, latest version of itunes),
    it started when i've connected my ipod to itunes and I just plugged it out when it was syncronizing.
    after that my whole content (music, pic's, video's) are deleted. The default stuff is the only thing what's left on it.
    And now every time I connnect my ipod classic my itunes freezes. I've installed itunes on my new computer but it keeps doing nothing..
    I've tried the support pages from apple but I just can't fix this problem, please help.

    See Corrupt iPod classic.
    tt2

  • My iPhone 5 keeps freezing when I connect to wifi, not just freeze the wifi, but freezes the whole phone and have to hold home and lock button. Locks up completely and instantly when I turn on wifi and connect. Solutions?

    My iPhone 5 keeps freezing when I connect to wifi, not just freeze the wifi, but freezes the whole phone and have to hold home and lock button. Locks up completely and instantly when I turn on wifi and connect. Solutions?

    1.  If you are really on iOS 7.1, you may wish to try upgrading to 8.1.2 which is the latest (basing this on your signature).
    2.  If updating the phone doesn't help, is this only when you connect to a specific wifi network?  Or all wifi networks (including public with no password)?  If it is ALL wifi networks, you may have a hardware problem.  Genius bar would be the next step.
    Make a Genius Bar Reservation (or cancel an existing reservation)
    http://www.apple.com/retail/geniusbar/
    Sign in using your Apple ID

  • My itunes freezes when I connect my ipod....help!!

    I have installed the new update (Windows 8 64 bit)  & my itunes freezes when I connect my ipod.    

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • When I plug my phone into my computer, Itunes does not automatically open, help! My phone does not connect with Itunes anymore..

    Please help!
    I am trying to connect my phone to itunes via computer
    and for some reason it is not being picked up
    this has only happened after i recently updated itunes
    any advice on how to connect it?
    when i authorise my phone to it, it says it is already connected to this computer
    however does let me access my phone via it.

    which operating system on the computer?
    which version of itunes
    does it not show up at all or just not auto launch itunes

  • HT1766 please help my ipad min is not working on the scren it says iPad disabled connect to itunes

    please help my ipad min is not working on the scren it says iPad disabled connect to itunes

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • HT4623 i am having a problem with my iphone 4s. it is not displaying its volume bar in music or anywhere when not connected to earphones. kindly help me with its volume settings.

    i am having a problem with my iphone 4s. it is not displaying its volume bar in music or anywhere when not connected to earphones. kindly help me with its volume settings.

    Have you tried the restart/reset/restore troubleshooting path?  That would be the best initial set of steps to take, particularly in a situation like this.  

  • Itunes 10.1 Freezes when i connect my 32GB iPhone 3GS

    Ever Since i updated my iTunes this morning it freezes when i connect the phone. When i unplug it it comes back. There are times that when i re plug it after a bit it works. My phone was acting up so I decided to restore it. But then i get the same problem again so i couldn't restore from back up. I been trying to figure out the solution to this problem since 7 AM in the morning EST. I been looking around the forums for similar problems but it didn't help. I followed steps from apple on this page: http://www.apple.com/support/iphone/assistant/itunes/#section_7
    That didn't help either. I been repeating all these steps plus more multiple times and nothing solved it. It just keeps freezing. I even Called out of work today just trying to Fix this dumb issue cause i can't be with out my phone PLEASE HELP!!

    I'm not sure what's causing this, but it has just started happening to me too. It has been happening with both my iPhone 4 and my wife's iPhone 3GS, but more with the 3GS.
    I thought rebooting the machine had fixed the problem, but it happened again this morning.
    A workaround that has worked successfully for me is this:
    With iTunes not running, plug in the phone. iTunes should then start on its own and start syncing properly. If it doesn't start automatically, start it manually (with the phone already plugged in) and the sync should start. But starting it first and then plugging in the phone doesn't seem to work.
    I'm running iTunes 10.1.2.17.
    Edit:
    Okay, I think I just got lucky with the suggestion above to plug in the phone with iTunes not running. That's not working for me anymore. What does work pretty consistently (though not always) it starting or restarting iTunes manually after the plug has already been plugged in. This may mean killing it from the task manager if it's frozen, or waiting for the freezing to wear off (which it does eventually, even though it never recognizes the device or starts a sync).
    Message was edited by: chcn

  • Computer freezes when i connect ipod mini 4gb

    i have a problem with my ipod mini 4gb (2nd gen.) for like 2months, it freezes when i connect it to my windows computer.
    i tried to reset my ipod en reinstal itunes, but nothing worked. PLEASE HELP!

    Hmm... See, I've tried that already (And just tried it again) and instead of allowing me to run it, the computer freezes entirely, just as it would if the "Restart your computer" message came up, only it doesn't show the text, and nor does the screen dim. The only thing I can do at that point is hold down the power button, thusly shutting the computer down. So I cannot restore my iPod that way. Are there any other ways? Or does anyone perhaps have any other suggestions?

  • How do I save internet article/info to read when not connected to Internet?

    Re iPad mini ios7:  I do not have internet at home, & want  to save articles/info/book pages etc while connected  to I WiFi in public place, to read when not connected at home.  Have tried ''add to home screen' , 'add to reading list', & 'bookmark'' , but am not succeeding.  Help?

    use pocket
    https://getpocket.com/

  • Upgraded to 7.7 but now itunes freezes when I connect my iphone

    why does my itunes freeze when I connect my iphone to my computer? My iphone still charges when i connect it so my computer does read it but not itunes.

    The following troubleshooting document may be worth a try:
    iPhone and iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows XP and Vista

Maybe you are looking for

  • What the hell is going on with CC interfaces?

    This is boggling. Having just bought a new MacBook Pro Retina and signing up for Adobe CC (after being a steady Adobe customer since before InDesign 1) I can't believe what a mess the interface handling is on Retina displays. The applications I use m

  • Trimming HD video files for export from Windows to After Effects on a MAC

    Hi, I have some .MTS files created using 2 HD camcorders: 1) Panasonic HDC-TM700 which shoots full HD @ 1920 x 1080 and 2) JVC Everio GZ-HM550 which shoots the same HD resolution I am working with PP CS5 on Windows 7 I need to trim some small pieces

  • Problem uploading photos

    hello i'm having problems seeing images (jpgs) that i've saved in an image folder i use for changing pictures on a webpage. the weird thing is i've done this countless times before and never had a problem but all of a sudden these jpgs won't appear w

  • Md04 Nit showing sub BOM ?

    Hi Gurus, i have created a MTO material With Two Levels Of BOM i ahve created a sales order and created aproduction order Through CO08.. i have not maintained stock for any material,.. when i checked in md04 stock requirement is showing only for firs

  • Asm disks not showning up when clusterware running

    On rhel 4 (centos) I installed/configured asm [root@green rc5.d]# ./S50oracleasm status Checking if ASM is loaded: [  OK  ] Checking if /dev/oracleasm is mounted: [  OK  ] [root@green rc5.d]# ./S50oracleasm listdisks D1 D2 D3 D4 D5 D6 then installed