Please help! my menu button stopped working =

i just bought an imove speaker for my ipod mini and everything was going great until i disconnected my ipod from it...now my menu button doesnt work! its stuck on shuffle songs and i cant reach my playlists or any other features anymore....essentially it has become an ipod shuffle...please please plaese help...why isn't my menu button functioning anymore? thanks so much for any help!!
ipod mini    

okay so i see theres a lot of cases of freezing...guess that could be it....ill try resetting it after work...hope thats it...thanks anyway....

Similar Messages

  • Clickwheel/Menu buttons stopped working + ASP/Warranty question

    Today, my year old 2nd gen nano's clickwheel and menu button stopped working. The hold button works, Itunes sees the thing, disconnecting the headphones does what it supposed to do and everything appears to be in order, except for the buttons. Neither resetting, nor restoring the software did resolve the issue and I am left with a small, elegant, brushed aluminium finished brick with music in it.
    Luckily, an Apple ASP isn't particulary far from where I live and I could and probably should bring it there. However, I am currently in a country that is not the one I bought the Ipod in and my purchase receipt and anything else that might have came with it is some 3000 km away.
    Does anyone know if bringing just the player to an ASP (it does have a serial number) has any remote chance of getting a warranty repair? And, if not, is it worth it even bothering with the repair, in terms of cost?

    Hi Kevinsen and welcome to the BlackBerry Support Community Forums!
    I would suggest performing a backup of your BlackBerry® smartphone then reloading the software as shown in the article below:
    KB11320 - How to perform a clean reload of the BlackBerry Device Software using BlackBerry Desktop M...
    or
    KB19915 - How to perform a clean reload of BlackBerry smartphone application software using BlackBer...
    Thanks
    -CptS
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • Please help! "Photoshop has stopped working"

    Please help me - message: "Photoshop has stopped working" - know what to do ... I can not use the newly installed photoshop program.
    My problem is that as soon as (or about 5 seconds) after I opened Photoshop CC, I get an error message stating that "Photoshop has stopped working". I can not use my newly installed photoshop programs.
    I have just the "factory reset" my HP PC with Windows 7 operating system. I have updated everything to be updated in Windows and signed me for Adobe CC at Adobe.com. Now I have installed Photoshop CC, CC Illustrator, InDesign, Acrobat Pro X1, ExtendScript Toolkit CC and Extention Manager CC.
    I have uninstalled and reinstalled photoshop to see if the program works for it - but no, it does not. I have also tried holding down the three keys Shift - Ctrl - Alt, In connection with that I open the program (I googled the problem and someone tipped off that there could be a solution to the problem) but unfortunately also without success.
    The thing is that all the other Adobe CC program works fully on the computer (InDesign, Illustator and pdf tool Acrobat Pro X1). They work flawlessly.
    What to do?
    Best Regards
    SyssleOscar

    Provide exact system info and the crash logs.
    Working with your Operating System’s Tools | Mylenium's Error Code Database
    Mylenium

  • Menu button stopped working on my Ipod mini

    Heading basically says it all, I am stuck in the same playlist unless i reset the ipod. All other factors of the clickwheel still work. I can hear the menu button clicking down just the ipod won't respond to the pressing of it.

    Hi,
    I have exactly the same problem, and so do dozens of others from what I can determine on the 'net.
    Menu button is still working as the reset function works fine (reset does not work unless both MENU & SELECT are pressed together).
    Have tried loading latest software, and then reverting to original software - problem is still the same.
    Anyone solved this problem, or have any ideas?
    Thanks

  • Menu button stopped working

    So I've been having troubles with my menu button. Sometimes the button works but most of the time it doesn't. All the other buttons work fine. I've tried just about everything. I even tried to restore it but that didn't work. I'm planning on going to the Apple store to have them check it out. Is there any way for me to exchange it for a different ipod though or am I stuck with the nano?

    Apple will only replace with another nano...
    However with the 5G the click wheel has definately shrunk... All that I can say is try hitting it a little different.
    Otherwise it could just be a small fault and a new device may not have this.
    Good luck with your trip to the apple store... Hope you find results...
    As I've had my 5G since it was released and I have had no issues to date.

  • Please help! itunes has stopped working. I followed all of the forum suggestions, deleted apple application support, all itunes files, downloaded the itues 64setup, uninstalled itunes & application supportrestarted, downloaded itunes, nothing. Same crash:

    Problem Event Name:
    BEX
      Application Name:
    iTunes.exe
      Application Version:
    10.5.3.3
      Application Timestamp:
    4f14cc3d
      Fault Module Name:
    CoreFoundation.dll
      Fault Module Version:
    1.630.15.0
      Fault Module Timestamp:
    4eb09717
      Exception Offset:
    000c4cd8
      Exception Code:
    c0000005
      Exception Data:
    00000008
      OS Version:
    6.1.7601.2.1.0.768.3
      Locale ID:
    2057
      Additional Information 1:
    b08f
      Additional Information 2:
    b08f00221970bd29782630deacc7f037
      Additional Information 3:
    2df0
      Additional Information 4:
    2df0972e5dbb33da1d2354bb8f3a48bc

    Go to support.microsoft.com/fixit
    In section 2 click on: Install or upgrade software or hardware
    Then click on the title in section 3: Fix problems with programs that cannot be installed or uninstall
    This link may get you there:  http://support.microsoft.com/mats/Program_Install_and_Uninstall/
    Let it run and then try to download it again

  • Menu button doesnt work

    All of a sudden the menu button stopped working. It was fine one day then I put the ipod on charge, several days later when I tried to use it again the Menu button no longer works...
    Actually I just realized that the Play/Pause button doesnt work correctly either. When you push and hold it it does not turn the device off anymore although it would still pause/play the songs. The forward/reverse work ok.
    I tried resetting the Ipod using the updater and that didnt help. I also tried Menu + Select ... strangely enough it resets the device but after it resets the Menu key doesnt work.
    Has anyone experienced this problem?
    I submitted a service request. Is there any way of modifying the service request since I just realized that the play/pause button is screwed up also?
    Finally, when you turn the hold on/off is that supposed to turn the backlight on/off as well? I never paid attention to it but now when I turn hold on that also turns the backlight on...is that screwed up as well?

    I am having a similar problem with my mini - it turns on fine and will scroll through the menus, but will not respond by going back through the menus. Instead, it freezes on a screen and does not respond to anything except resetting it (menu & select button). Doesn't seem like the proper way to navigate through the screens and is completely frustrating. I was ready to cry yesterday at the gym because it wouldn't work and didn't know the reset "trick" until 3 hours later! I have also had many problems turning it off too. My brother who owns a regular iPod thinks I am crazy but at least I am seeing people out there with similar problems.
    On another note, I have to say I am completely disappointed with Apple. The company loves to portray this user-friendly persona, but in truth it is not that way at all. I received my mini in May and have just started to use it full force this month (October) ... now my 30-day phone support has expired and if I want "live" help I have to pay $50 for extended service. That's bull - I'd like some real answers but have been relegated to chat boards (no offense) and trying to troubleshoot the problem myself by finding close but not exact postings. It seems like such a deceptive bait & switch ploy by Apple. I am tempted to send my mini back for service but just read on the web site that I could be charged up to $100 for service. Again, sounds very sneaky so not sure if I should take the risk or live with a highly annoying product defect. Any suggestions?

  • Menu button not working

    I've got a 6gb mini, had it since Sept 05. Yesterday the menu button stopped working, so I can't choose what music it plays, it only plays on shuffle as I can't get back up. I haven't done anything to it so I wondered what to do. I got my iPod in the US but I live in the UK. I bought the Applecare Protection Plan when I got it but forgot to enroll it, so I don't know if it's still valid. It should still be covered under the protection but I don't know if I've left it too late to register it. What do I do?

    If doing a Restore and reset do not help, very likely a hardware issue
    In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ at your own risk
    http://www.ipodresq.com/index.php

  • After installing ios7, my ipad buttons stopped working, I can't even turn off the ipad. Please help me. I don't know what to do.

    After installing ios7, my ipad buttons stopped working, I can't even turn off the ipad. Please help me. I don't know what to do.

    Try to reset the device:
    Device Reset (won't affect settings/data/music/apps/etc)
    1. Press and hold (& continue to hold) BOTH the Sleep/Wake button & the Home button.
    2. Continue to hold BOTH (ignoring any other messages that may show) until you see the
    Apple logo on the screen.
    3. Release BOTH buttons when you see the Apple logo and allow the device to boot
    normally.

  • I have an iphone4 that I've had since April, but recently the lock button stopped working, help please??

    I've had an iphone4 since April and recently the lock button stopped working, I was wondering since I hadn't had it for a year if it could get fixed for free

    ONly way to find out is to go to your nearest Apple store and talk to the people at the genius bar.

  • Menu button wont work! pleeeease help!

    my i pod mini's menu button wont work.
    i'll push it and it doesn't respond.
    and i cant reset it because i need to use the menu button.
    also...the backlight will come on at random times lyk even when im not using it. and it beeps sometimes too. just really loud beeps, not through the headphones but the actual i pod.
    i dont know whats going on.
    and i need to use my menu button.
    please help me. i need answers!
    please and thank you.
    <333 a L e x x<br>
    windows   Windows XP  

    Very likely it is a hardware issue (exactly same as mine). I am afraid to say that you need to send it for repairing. You will get a replacement if your iPod mini still under the warranty

  • My iphone 4 wont turn on after hours of charging, normally i would press the lock button and home button together but my lock button stopped working afue weeks ago. Help!

    My iphone 4 wont turn on after hours of charging, normally i would press the lock button and home button together but my lock button stopped working afue weeks ago. Help!

    Hello Kimbo1991,
    It sounds like your phone is not successfully booting even though you have reset the device. I would next recommend attempting a backup and restore to iTunes with this article:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    http://support.apple.com/kb/ht1766
    If you are unable to restore with iTunes I would next put the device into recovery mode, and attempt the restore again:
    If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • S110 menu button not working

    Hi, 
    We're on our honeymoon and been taking good pictures without any problems with Canon S110 until yesterday. The camera suddenly has the following problems:
    1. turn on normally but then immediately taking one photo no matter what mode it's on. 
    2. once the single photo was taken, the camera completely freeze except the display button working and the  delete button (working but not be able to select delete)
    3. shutter button and zoom in or out is completely useless
    3. MENU button is NOT working at all
    We have been trying the following:
    - new fully charged batterry
    - new SD card
    - turn off and remove both battery and SD card overnight
    It's very frustrated and we only have this camera on this trip. Please help!!!

    Just registered to report my solution.
    I have a similar problem with the PowerShot S110 of my wife's sister.
    At some time a menu button and all joystick buttons stop working.
    The problem was because of sticking zoom control (yeah it's very stupid).
    At the normal state zoom control must return to central position!
    When zoom control is on the left or right position - some buttons don't work.
    I hope this info will be usefull to someone.

  • Today my M-Audio iControl play button stopped working on my Mac Book Pro after I unplugged the USB cord.

    Hello,
    Today my M-Audio iContol play button stopped working after I unplugged it from the USB port and then plugged it back in. I have a Mac Book Pro Mac OS X 10.7.3 and I only use it for Garage Band. The iControl will only play a very short snippet of a song then shuts off? (Like a millisecond) My space bar works fine as well as the GB play button using the mouse. I have searched for the GB preference files listed on some blogs but I cannot find them...help please!! One more thing, I plgged the iControl into my other Imac and it works fine so the iControl is ok.
    Thanks!

    I have searched for the GB preference files listed on some blogs but I cannot find them...help please!!
    In MacOS 10.7.3 the User LIbrary is hidden. To find the Preferences Files use the Finder "Go" menu:
    Click onto you Desktop to bring the Finder forward.
    In the Finder Menu press "Go" and hold down the "option/alt" key, until your user library appears in the drop-down menu
    Select "Library" and in the Finder window that opens navigate to the "Prederences" folder; move com.apple.garageband.plist to the Desktop.
    Regards
    Léonie

  • I installed Canon Pixma MG5520, since, always get "canon quick menu has stopped working" how do I fi

    I installed Canon Pixma MG5520 on win 7, since, always get "canon quick menu has stopped working" how do I fix please?

    Hi thaluza,
    We can see if there are files in a folder called TWAIN_32 other than those related to the printer that may be causing a conflict with the Quick Menu. If there are, we can temporarily remove the files to see if this will resolve the issue.
    To move the non-Canon Twain files from the Twain_32 folder, please follow these steps:
    1. Go to Computer / My Computer and locate the C: drive, then double-click on it to open.
    2. Locate the WINDOWS folder, then double-click to open it.
    3. Locate the TWAIN_32 folder, then double-click to open it.
    4. Inside of the TWAIN_32 folder, you will see a folder for your printer as well as a WIATWAIN.DS file. If there are other files in that folder, you will want to move them to another location, preferably your Desktop by doing the following:
        4-1. Click on each of the other items in the folder other than the the WIATWAIN.DS file and the folder for your printer to select them. You will want to hold the the CTRL key on your keyboard while selecting each of the items until all of the items except for the two referenced above are selected. Please be sure to leave the WIATWAIN.DS file and folder related to your printer inside of the TWAIN_32 folder.
        4-2. With all of the items you want to move selected, please go to the EDIT menu and select the CUT option.
        4-3. Go to your Desktop (main window that comes up when you start Windows with all of the icons on it) and right-click your mouse in any blank area, then choose the PASTE option. The items you selected from the TWAIN_32 folder should appear on the Desktop.
    5. Try to launch the Quick Menu again.
    Hope this helps!
    This didn't answer your question or issue? Please call or email us at one of the methods on the Contact Us page for further assistance.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Maybe you are looking for