Please HELP!!! my menus won't highlight when I simulate/burn

I am a novice to DSP, I have figured out how to make menu and have those buttons lead to other things. I am creating a directing reel so I have an initial menu that leads to two other menus. When I click on the menus they lead me to the appropriate places and then I can click on my work as well, but when I simulate the project, the menu bottons as well as my work bottons are not highlighted, and I can't use the arrows to get to them. I have been reading that I need overlays, but I'm not sure what I am doing wrong. I have put jpegs in my buttons and they work fine, but they won't highlight, I am also using my work (videos and commercials) as my other buttons, and they won't highlight either. I am sure it is a simple answer, but I would really appreciate the help. Thanks so much.

Hi David
The easiest way to do it is to read the manual regarding simple overlays. Basically you create a flat .psd file that is all white except for the areas that you want as your highlight shapes, which you make black (or 4 levels of grey scale to which you can assign different colours in the advanced colours tab in DVDSP)
Cheers
B

Similar Messages

Hi, I tried installing the new software update to my iPod touch this morning, got an error message that I could not finish installing it, and now my iPod is completely unresponsive, please help? It won't respond when I plug it into iTunes or anything.

Hi, thank you for helping me! Every time I plug it into the USB port of my computer, there is an image on my iPod touch that shows a USB cord and tells me to plug it into iTunes, but it is completely unresponsive. I have tried holding the home and power buttons simultaneously for 15 seconds, and that does not do anything either. Any ideas? Thank you so much!

Do you remeber the exact (or close to it) wording of the error message?
Try manually placing the iPod in Recovery mode and then try to restore
Next try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
You can also try another computer to help determine if you have an iPod or computer problem.

Blank screen in itunes store-please help im not very technical and when i click on my itunes app the screen is blank how can i fix this please?

Blank screen in itunes store-please help im not very technical and when i click on my itunes app the screen is blank how can i fix this please?

See if any of the following fix it.
Try logging out of your account on your phone by tapping on your id in Settings > iTunes & App Store and tap 'Sign Out' on the popup and then log back in.
If that doesn't fix it then try closing the iTunes store app via the phone's multitasking bar and see if it works properly when you open the app : double-click the home button to open the taskbar and then swipe or drag iTunes from there up and off the top of the screen to close it, and the click the home button to close the taskbar.
A third thing to try is a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the equivalent of a reboot.

Please help me ! How to solve when iMac, OS X Mavericks (10.9.2) is disable ?

Please help me ! How to solve when iMac, OS X Mavericks (10.9.2) is disable ?

I had the same problem.
Try this.
https://igppwiki.ucsd.edu/groups/publichelpwiki/wiki/a1538/Howto_Disable_Acrobat _as_the_Safari_PDF_Viewer.html

Hi,can you please help me wat can I do when my IPad was stolen?

Hi,can you please help me wat can I do when my IPad was stolen?

If you set up the Find My iPad service in the Settings prior to the iPad going missing, then there is a chance that can be tracked, wiped of its data or locked (which does the same thing as activating the screen lock), though it depends on a number of factors: the iPad is turned on, is connected to a WiFi or 3G network, and has not had the Find My iPad service turned off or the iPad completely restored. Log into icloud.com and go to the Find My iPhone section.
If you did not set up Find My iPad, then there is no way to track it. Report the loss the police and change any passwords for any online accounts you may have used from your iPad (the iTunes Store, for instance).
Regards.

Hello please help me my MacBook Pro screen when desktop switching fingers pressing 3 distorts a bit, with him?

hello please help me my MacBook Pro screen when desktop switching fingers pressing 3 distorts a bit, with him?

First, remove Comodo. You don't need it, and it sounds like it is causing a problem.
The other symptoms sound like you have adware installed. Comodo might have detected some components of that adware, or it might not have, but whatever the case, you should NEVER allow any anti-virus software to quarantine or delete files from your computer. See: How to remove infected files.
Regarding the adware, see my Adware Removal Guide.
(Fair disclosure: The Safe Mac is my site, and contains a Donate button, so I may receive compensation for providing links to The Safe Mac. Donations are not required.)

Sir Please Help Me With My Homepage. When I Set My Home Page To About:home It Gives An Error Saying Url Not Valid... Please Tell Me how to Fix this!

Question
Sir Please Help Me With My Homepage. When I Set My Home Page To About:home It Gives An Error Saying Url Not Valid... Please Tell Me how to Fix this!

I'm not seeing a screenshot, so could you please try another time to attach one?
*http://en.wikipedia.org/wiki/Screenshot
Use a compressed image type like PNG or JPG to save the screenshot and make sure that you do not exceed the maximum file size (1 MB).
Make sure that you use the location bar and not the (Google) search bar.
*http://kb.mozillazine.org/Toolbar_customization
*https://support.mozilla.org/kb/Back+and+forward+or+other+toolbar+items+are+missing

Please help, my "Numbers" won't open and when I looked up in my console, I see this message :13-03-04 1:18:19 PM Numbers[601] Incompatible applications: app=com.apple.iWork.Numbers, targetApp=com.apple.Safari

I tried to open my "Numbers" application today and it won't open saying it has "closed unexpectedly". When I looked up the messages in the console, this was there. Please help!

If you purchsed from the App store then delete the application and reinstall

Please help! Computer won't recognize ipod when plugged in!

Everytime I plug my ipod into my computer it won't show up under the devices section or the itunes and it also won't even say it's connected on the ipod itsself. PLEASE HELP!

even though no one replied, I figured it out myself.

Please Help! Windows won't install IPod Driver!

My brother got a 2GB IPod nano and itunes and everything installs but when i plug in the IPod i get the install driver window. I click to intsall driver but it keeps saying it couldnt find anything to install (even when i have the disc the ipod came with inside). Its a Toshiba labtop. If anyone knows why the driver won't install or had the same problem please help! Thanks

Hi brunos mum, and a warm welcome to the forums!
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then Safe Boot , (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it finishes.

*** PLEASE HELP *** My IPHONE won't sync with Itunes *** PLEASE HELP ***

My husband & I both have Iphones & we went to sync & his goes fine, but everytime I plug mine in, the rainbow beachball comes up & just turns & turns & won't go away, and never connects to itunes & when I unplug my phone it goes away... We have 2 separate accounts setup to do our syncing...
Also my phone does not let me dial out or people dial in... They go right to voice mail. I have tried rebooting & even the "hard reboot"
And one more thing... Is there any other way for me to save my contacts & calender??
If I have to restore, how do I do that??
Please help me.... Thank you!!

You are a LIFESAVER!!!!! It worked & my phone is syncing.... No one at the "apple" help desk has been able to help me all week. THANK YOU so much...
Can the phone not handle that many podcasts at once? I have a 16GB phone...

Please help iPhone 4S won't turn on!

Okay so this all happened months ago when ios7 came out. I tried to update my iPhone 4S software straight off of my phone in the settings to ios7 and it wouldn't work. So than I hooked my iphone up to my computer and went on iTunes and tried to update from there manually. Everything was working it said like 95% done updating but than it said this operation can't be done. Now, my iphone won't turn on, it goes to the connect to iTunes screen, but i don't know what to do I tried to connect it to iTunes and it didn't turn on. Please help I need this iphone to turn on!

Assuming your phone was never jailbroken, try the following:
Install the latest version of iTunes on your computer if it isn't there already from apple.com/itunes
Reboot your computer
Connect the phone to a USB 2 port directly on your computer, not to a USB hub. If it is a desktop or tower computer use a port on the back, not on the front
Disable your antivirus and firewall
Launch iTunes
Connect the USB cable to the computer, but not to the phone
On the phone hold the HOME and SLEEP buttons for EXACTLY 10 seconds, then release the SLEEP button but continue holding the HOME button - if an Apple logo appeared you held too long; the screen should be black when you release the SLEEP button.
While still holding the HOME button connect the end of the USB cable to the phone
Wait until iTunes acknowledges the phone, then release the HOME button.
The phone should now restore. If it doesn't note the error number and post back.

Please help, LUMIA 920 won't update.

Hello
First let me say that I've had my NL0920 for six months and love it, but I am really frustrated that even 5 months after Amber came out my phone won't update and even fails updating when I try using other methods that have been discussed here. Please help, this is really frustrating because I don't have any of the Amber goodness and at this rate I know I will also miss the Black update. Even though I love my 920 I fully expected it would be updated fairly constantly as that was one of the main things that were easy to see from the press about Nokia.
I have a Nokia Lumia 920 type RM-821, white (RM-821_lta_lta1_546)
product code 059S1L6,
configuration ID 153556,
Label ID 1232.5957.9200.10211.142,
Application Version 3.3.32
Mobile Operator 000-PR
Accesories Agent 2.6.2.1
Feedback to Nokia 2.5.0.17
Firmware Update Notifier 1.0.1.7
Nokia Share 2.1.2.3
Silent Installer 1.4.1.2
SIM Unlock 1.0.0.5
Software Version 1232.5957.1308.0002
The phone is an unlocked Puerto Rican Country variant and is being used in Panama Central America with the Claro Operator. According to the Global Availability page (http://www.nokia.com/global/support/software-update/wp8-software-update/) the Country variant should already have the amber update available.
When I try checking for phone updates through the Settings menu, it tells me that my phone is up to date, which is obviously not true.
Please help. I love this phone but if it won't upgrade then I am going to have to start looking at something else, because I really hoped I would get the new camera improvements, and the same with the black update.
Moderator's note: We removed the attachment and the phone's IMEI in the message. We also removed some parts of the post that mentions the use of an unauthorized software. Posting this information on the forum is not allowed.

Have just got this convincing answer from Nokia supprt (Australia <3 )
Hi Ridha,
Thank you for contacting the Nokia Careline.
We understand that you would like to know information about the software update availability of your Nokia Lumia 920.
Rollout timings and feature availability vary by phone model. We expect the roll out of the update will be completed by the end of September 2014.
We ask you to be patient, as updates for Nokia Lumia range are always released gradually.
To check the availability of the software update for your Nokia Lumia 920, Please click use the link below:
http://www.nokia.com/global/support/software-update/wp8-software-update/availability-in-latin-americ...
Please feel free to write back to us if you need further assistance with this case. You may also contact one of our friendly Technical Support Executives at 1-300 366 733 from 9am to 5pm, AET, Monday to Friday, closed on national public holidays. For online assistance, please visit ‘Contact us’ at our website http://www.nokia.com/au-en/support/contact/contactus/
Regards,
Francis L.
Nokia Care Representative

Please HELP! Why won't Leopard install on my eMac?

When I put the Leopard DVD in my eMac it does not recognize it at all. I don't hear the drive running, and nothing pops up on the desktop. Altho it is an older machine, it meets all of the system requirements: 1GHz, 640MB, PowerPC G4, with plenty of hard drive space! I've tried to reboot and install, I've tried reboot and hold the C key to install... nothing works! I even put in another DVD just to make sure that the optical drive is still working properly... it played just fine.
I've read everything that I can about installing but haven't found anything that addresses this. I did see one article that said that Leopard cannot be installed on UFS(?)-formatted volumes. Can anyone tell me how I would find out whether I'm affected by that or not? Also, when I tried it in my iBook G4, it popped right up... what's the deal?!
PLEASE HELP! I'M SOOOO FRUSTRATED!! Thanx in advance!

debkndy wrote:
Hi There...
So, I currently have a CD read/write and DVD player combo drive... should that be able to read the Leopard Install DVD? I don't understand why my iBook G4, 1GHz with 256MB will read it, but my eMac G$, 1GHz, 640MB won't!
I would suspect that your optical drive is not functioning properly. While the drive is most likely capable of reading DL DVDs, it may not be working right. See if you can skip through a full DL DVD movie on the drive with zero errors. Be sure to include both layers meaning go past the 2-hour point.
The target mode is another solution, but even if you install it, you won't be able to fix it or do anything that requires the DVD unless you fix that first.
I will try to install it using the "target mode" with a firewire and see if it works, unless anyone has any other suggestions for me... thanx.

Please please help. Computer won't log in.

Guys, I really need help. I shut my computer down a few days ago, and when I turned it on, it won't accept my password in thee login window. I then tried resetting the password from the master Install CD, but it won't allow me. When it asks me which drive I would like to reset the password from, if I select the CD, then the password boxes will allow me to write in them. However, if I select the hard drive, the spinning cartwheel comes up, spins for 10 seconds then the screen dissappears and goes back to the main menu of the install CD. Please help, why can't I log in?

Do you get any sound or any video at all?

Please HELP!!! my menus won't highlight when I simulate/burn

Similar Messages

Maybe you are looking for