Please help.. My phone locked!!

This is a stupid question but my friend bought iphone 4 for me from USA. but it doesn't work in my country (Thailand) i mean it locked.. How can i do the factory unlock in my country ?? and one question.. I try to do the case program app from my phone but they have not this app in Thailand so how can i get the free case from Thailand??

All iPhones purchased in the US are carrier locked to AT&T. THEY CANNOT BE UNLOCKED BY APPLE OR AT&T.
Since the iPhone has not been released in Thailand, you are NOT eligible for the free case, which is why you won't find the app.

Similar Messages

HT1689 i have my daughters iphone 3, i want to use it as an i-pod, but it keeps receiving messages from some her friends is there a way to stop this from happening, please help, my phone is maxed out and would really like the storage for music, thanks

i have my daughters iphone 3, i want to use it as an i-pod, but it keeps receiving messages from some her friends is there a way to stop this from happening, please help, my phone is maxed out and would really like the storage for music, thanks

It sounds like it still has her information on it, so it might be efficient to navigate to Settings, then General, then Reset, then Erase All Content and Settings. You can then set up the phone again, using your information. This way the phone will be yours, officially, and her data and information will be removed.

PLEASE HELP MY PHONE WONT TURN ON

Last night I was walking in the rain and a bit of water may have got inside my phone, it was working fine whilst I was in the car, but when I got to my front door I threw it into my bag so it turned off.
I left it about 20 minutes before I went back to it and I pressed the button to turn it on and I got the red light then the loading screen came up with the loading bar, the loading bar does not appear to move but the phone turns off after a couple of seconds and then repeats over and over again until I take the battery out, I tried taking the battery out many times and I'm still having the same issue.
I tried again when I woke up this morning and still the same. But about 10 minutes ago when I turned it on the call, blackberry button, escape and escape and end call button started flashing then my phone started vibrating and then a white screen flashed and then it went off and went back to what it was doing before.
The bar moved slightly more then went off and hasnt done the same since.
I have tried my brother battery and it does the same PLEASE HELP ME

Hi and Welcome to the Community!
I know it's been a bit since you posted this, but you never know.
First off -- with moisture intrusion into a BB, the only thing that is predictable is that the results will be unpredictable. I've seen some come back with no problems, others never work again at all, and everything in between (e.g., work for a while before failing).
Secondly, see this FAQ:
http://www.blackberryfaq.com/index.php/Got_Your_BlackBerry_Wet%3F
It has recommended waiting periods that must be adhered to...no early checking. If the BB is not totally dry when it is powered on, that act can fry it...so waiting the full delay is critical.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

PLEASE HELP PREPAID PHONE

Hello please help me as i recently called in and got my prepaid phone re activated with a new number and added $20 dollars but after getting off the phone with "John" my phone was unable to call customer support or even send any txt messages when it took my money and said i have 0 dollars when i just added the money............. soooo PLEASE help. i added my money with the person on the phone and now it isnt working at all. please id like to get this resolved ASAP

The Prepaid customer service # is 888-294-6804, and I believe the sequence is 1 (English), mobile #, then options 4,6,4 to get to a real person.

TS1363 Please help my phone just went black and will not go on.

Help my phone went black and do not whant to switch on i bought this phone 3 weeks back vrom a lady and gave my samsung s4 to my wife se will kill me if i ask her for new phone the pone.

You sure the battery is not out of power?
Try doing a Restart/Reset. In this case, it would be the Reset procedure if it does not turn on normally.
http://support.apple.com/kb/ht1430

PLEASE HELP- NEW PHONE (THREE DAYS OLD) MESSAGE IS...

I HAVE A NOKIA N8 WHICH ARRIVED A FEW DAYS AGO. I RECIEVED A MESSAGE TODAY WHICH HAD A RED STAR IN THE CORNER. It THEN WOULD NOT LET ME SEND A REPLY OR ACCESS OTHER MESSAGES TO REPLY TO. I COULD RING THEM BUT COULD NOT TEXT THEM.
PLEASE HELP.
THANKS

You are right in time to write to Santa

TS1363 Please help.. Locked phone, changed password drunk and woke to have no clue to what new combination...

Hi .. would highly appreciate some input on how to get into my phone from a forgotten passcode... i was forced to change it last night due to friendly intrusion and hacking.. silly thing is i did it whilst housing a healthy amount of alchohol and once i was to arise i hit my passcode and it didnt work, i then partially remebering going into it to do this but for the life of me cant remeber it. So now im over it and just wanna fix it.. any ideas or suggestions?
Cheers...

Hi Colonel,
OK, first thing is to make sure that if you are going to be drinking in the future, you separate yourself from your iPhone before the drinking commences.....
Then, follow the instructions in this previous post, and you will be good as new (at least in terms of your password...can't say about the hangover)
If you can't remember your iPhone passcode, hitting the restore button in iTunes followed by restoring from your most recent iPhone backup on the last computer the phone was synced with will reset the passcode. If you do not have access to the last computer the phone was synced with, you will have to force the phone into recovery mode & restore as a new device. All data on the phone will be erased.
Cheers,
GB

Please help, my phone layout will not load by default.

I created a phone layout for my website, but it is not loading on the iPhone 5 (using Safari)- unfortunately I don't have another type of device to test it on. If I manually enter "device=phone" instead of "device=desktop" it loads the correct format, but it will not load unless I do that. I tried it in 2 different iPhones, one of which had not previously visited my site, and it's a persistent issue. I am considering deleting the site via business catalyst and then publishing it again fresh to kind of reset things, but I'm new to Muse/Business Catalyst/Web Design in general so I'm concerned that might be overkill and might cause other issues. Any advice on further troubleshooting would be much appreciated.
The url is http://www.annagator.com/
Thanks!
-Anna
Update: I just tried re-publishing the site making sure "all files" was checked instead of "modified files" but that didn't help either :/

No problem, here is a shot of my plan mode in Muse for both versions, so you can see how it's supposed to work. The issue is less important on some pages than others, like it's a big issue on the illustration and resume page, its difficult (kind of impossible) to access all the content on those without the proper layout. Also, I did get confirmation through some other people that it is definitely not working properly on their devices.

Please help! iPad locked while using it with Apple TV

If anyone can help me, I'd really appreciate it!
For some reason, my mom's iPad (first generation) is having an issue with the password. My mom uses her iPad daily, so she certainly didn't forget her 4 digit password, and yet, we can't unlock the iPad. We've tried so many times that we are currently locked out for an hour.
I have no idea if the following is the reason that the password no longer works, but I might as well descibe what I was doing that may have caused it to stop working.
I bought a new soundsystem for my mom's television. We also have an Apple TV hooked up to the TV. I was testing out the sound system by trying to Netflix from Apple TV through the new sound system. In what I imagine to be a totally unrelated problem, the sound system wasn't working with the Apple TV unless the sound system is connected directly to Apple TV (via optical cable).
Anyways, in the midst of trying to figure all of this out, I was using my mom's iPad to control the Apple TV (as opposed to using the remote control that comes with the Apple TV). I was having no issues using the gestures on the iPad to control the Apple TV. Then, after so many minutes of the iPad being idle, I re-awakened the iPad to see that I needed to input the 4 digit password. I asked my mom for her password, tried several times, and it didn't work. Then I had my mom try herself, and the 4 digit pw didn't work. We had to wait several minutes before trying again. We're now at the point where we're having to wait 60 minutes to try an input the 4 digit pw again.
I'm wondering if there was something happening with the Apple TV that caused the iPad to mess up somehow? Any ideas?!?
I'm very confused right now. I would hate to have to restore my mom's iPad and have her lose the hundreds of pictures that she saved on there.
I connected my mom's iPad to my Mac (she doesn't have her own computer) to see if that would work, but my Mac is saying that my mom's iPad is locked.
I can't remember the last time we synced my mom's iPad to any computer. It's possible that the last time it was synced was with my old Mac Mini that I haven't used since December. Would connecting it to my old Mac Mini yield potentially helpful results??

I suggest that in addition to waiting out the 60 minute period, try resetting the iPad. (Do both.)
Reset it by holding the on/off and home buttons together for about 10 seconds till the Apple logo appears.

After doing a complete restore of my phone to get it back to factory settings I am not getting error 0eX800000A indicating my iphone 5 cannot be connected. Please help, my phone is not really usable right now.

After doing a complete resotre of my phone to get back to factory settings I can no longer connect it to iTunes. It gives error 0ex800000A. I am working off of Windows 7.

Hi there Paula120,
You may find the troubleshooting steps in the article below helpful.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
-Griff W.

Please help my phone bought a game by itself

Well I went to bed was going to play tiny death star saw a new game on it so I opened all of the tabs it said appstore and it was on joining hands 2 it costed 1.49$ and I had to pay my dad that money because the money was under my dads credit card! I didn't buy it my family didn't buy it! my phone is with me 24/7 it bought it itself I want my money back please

Hi, heebz. Welcome to the Nokia Support Discussions. Let's try to isolate the issue. What's your phone's model and which store are you referring to? Where are you located? Just to verify, was the app successfully purchased and installed on your phone? Did you receive any email confirmation of the purchase? Keep us posted.

Please help, noisy phone line think its a high res...

HI,
Just moved in and phone line / bt broadband was activated a week ago. Phone master socket is OpenReach branded.
I have the BT supplied broadband filter fitted directly to the test socket (just the adsl router and a single phone connected).
Using the 17070 quiet line test , i have varying volumes on hissing and noise on the phone. This varies between loud and intrusive (difficult to hear callers) to fairly quiet. This seemed to be better during the cold weather over last weekend, but is worse again this morning.
I can also hear adsl connection noise when the router was connecting, depsite being through the adsl filters. This lead me to find threads related to High resistance faults whcih I think may apply to me.
BT online fault test shows no fault found.
Adsl Stats:
I was supplied with a home hub 3A
Connection Information
Line state: Connected
Connection time: 0 days, 21:29:11
Downstream: 3.625 Mbps
Upstream: 448 Kbps
ADSL Settings
VPI/VCI: 0/38
Type: PPPoA
Modulation: G.992.1 Annex A
Latency type: Interleaved
Noise margin (Down/Up): 10.6 dB / 15.0 dB
Line attenuation (Down/Up): 32.2 dB / 16.0 dB
Output power (Down/Up): 19.9 dBm / 12.4 dBm
FEC Events (Down/Up): 2941 / 325
CRC Events (Down/Up): 12 / 45
Loss of Framing (Local/Remote): 0 / 0
Loss of Signal (Local/Remote): 0 / 0
Loss of Power (Local/Remote): 0 / 0
HEC Events (Down/Up): 79 / 30
Error Seconds (Local/Remote): 8 / 22
1. Product name: BT Home Hub
2. Serial number:
3. Firmware version: Software version 4.7.5.1.83.8.57.1.3 (Type A) Last updated Unknown
4. Board version: BT Home Hub 3.0A
5. ADSL uptime: 0 days, 21:31:21
6. Bandwidth: 448 / 3712
7. Data sent/received: 0.3 / 2.7
8. Broadband username: [email protected]
9. BT FON: Yes
10. Wireless network/SSID: BTHub3-KC3K
11. Wireless connections: Enabled, (802.11 b/g/n (Recommended)) 20 MHz
12. Wireless security: WPA and WPA2
13. Wireless channel: Automatic / 1
14. Firewall: Default
15. MAC Address:
16. VPI/VCI: 0 / 38
17. Line profile: Interleaved
18. Software variant: -
19. Boot loader: -
The home hub doesn't seem too good at keeping the sync, speed drops regularly and it maintains a high SNR.
My previous router was a Thomson Speedtouch 780, which provides a higher sync and much better stability. Presumably this is due to the broadcom chipset (would a home hub 3b also be better?)
Speedtouch stats from this morning:
speedtouch 4/12/12 08:45
DSL Connection
Link Information
Uptime: 1 day, 10:39:46
Modulation: G.992.1 annex A
Bandwidth (Up/Down) [kbps/kbps]: 448 / 5.120
Data Transferred (Sent/Received) [MB/MB]: 24,94 / 119,27
Output Power (Up/Down) [dBm]: 12,0 / 19,5
Line Attenuation (Up/Down) [dB]: 15,5 / 31,0
SN Margin (Up/Down) [dB]: 19,0 / 9,0
Vendor ID (Local/Remote): TMMB / TSTC
Loss of Framing (Local/Remote): 0 / 0
Loss of Signal (Local/Remote): 0 / 0
Loss of Power (Local/Remote): 0 / 0
Loss of Link (Remote): 0
Error Seconds (Local/Remote): 0 / 0
FEC Errors (Up/Down): 0 / 158.090
CRC Errors (Up/Down): 0 / 68
HEC Errors (Up/Down): 0 / 62
speedtouch 04/12/12 09:30
DSL Connection
Link Information
Uptime: 1 day, 11:25:26
Modulation: G.992.1 annex A
Bandwidth (Up/Down) [kbps/kbps]: 448 / 5.120
Data Transferred (Sent/Received) [MB/MB]: 28,90 / 129,91
Output Power (Up/Down) [dBm]: 12,0 / 19,5
Line Attenuation (Up/Down) [dB]: 15,5 / 31,0
SN Margin (Up/Down) [dB]: 19,0 / 4,5
Vendor ID (Local/Remote): TMMB / TSTC
Loss of Framing (Local/Remote): 0 / 0
Loss of Signal (Local/Remote): 0 / 0
Loss of Power (Local/Remote): 0 / 0
Loss of Link (Remote): 0
Error Seconds (Local/Remote): 0 / 0
FEC Errors (Up/Down): 0 / 171.051
CRC Errors (Up/Down): 0 / 68
HEC Errors (Up/Down): 0 / 62
As your can see theres a wide range in the SNR figures, although the speedtouch is much better at holding the sync and not dropping the speed.
Given the line attenuation at 31db, I would have expected a higher sync rate. The estimated line length of ~2.2km from kitz.co.uk seems to be about right.
Any advice appreciated, including how to report this fault to the right people.
Thanks
Jon

I'm suspecting that I will be getting billed for the last engineer visit ( as he couldn't find a fault and therefore said it must be my equipment). I can't afford to pay one fee let alone 2 if I report it again with the same result.
However since the visit, the occurrences of the intermittent noise on the line have been fewer and further between. This morning however, after listening to a 1571 message I heard more noise so I did a quiet line test to see. Initially the line was quiet, but then I heard some quit noise and then a ringing sound (like when you dial a number and it rings remotely) as if I had made a call. The "BT Quiet line message" cut in but I could still here the ringing underneath. I waited to see if I would be able to hear if someone answered but the ringing stopped after a while and I couldn't here a voice so I don't know if they answered or it rung off.
Is it possible my line is picking up the ring tone from another line?
Also, when the engineer arrived he initially said his test had shown a fault and that water must have got in somewhere. However when he removed my filter/phone/router from the test socket, his tests then showed no fault. Is it possible the fault only shows up when the adsl is active. Back when the line was first active I could the router negotiating (even thorough 2 filters) although this doesn't happen now.
Moving on to the adsl side of things, Currently my stats are:
DSL Connection
Link Information
Uptime: 0 days, 11:48:54
Modulation: G.992.1 annex A
Bandwidth (Up/Down) [kbps/kbps]: 448 / 5.440
Data Transferred (Sent/Received) [MB/MB]: 9,61 / 39,04
Output Power (Up/Down) [dBm]: 12,0 / 19,5
Line Attenuation (Up/Down) [dB]: 15,5 / 31,0
SN Margin (Up/Down) [dB]: 20,0 / 5,0
Vendor ID (Local/Remote): TMMB / TSTC
Loss of Framing (Local/Remote): 0 / 0
Loss of Signal (Local/Remote): 0 / 0
Loss of Power (Local/Remote): 0 / 0
Loss of Link (Remote): 0
Error Seconds (Local/Remote): 0 / 0
FEC Errors (Up/Down): 0 / 1.384
CRC Errors (Up/Down): 0 / 0
HEC Errors (Up/Down): 0 / 0
Interleaved.
With the BT Home hub (3a) the connection would drop peridocally, so I'm using my Thomson 780wl which hold the connection better and also shows less FEC errors than the HH.
I think the connection speed and the interlacing are poor given the line attenuation. The line length is about 2 - 2.5km, underground from the village to the exchange, overground to the house. No cabinets directly connected to exchange.
I've been monitoring signal to noise ratio and have noticed something odd:
This happens every day, in the same pattern. Its not interference from any internal wiring or appliances or heating etc. I understand that noise changes over time but this is a 5+ DB drop is this normal?
Any advice?

Please help. my phone won't open/start. how can i reprogram/reformat my phone

hi guys. i have a sony xperia arc s. when i try to open/start my phone, it will turn off eventually after the xperia logo appears. it will restart on its own and again, turn off after the xperia logo. this will just repeat and will not start the phone properly. i have to remove the battery to turn the phone off. i had it checked in cellphone repair shops. they told me that my phone's program is defective and i have to reprogram/reformat the phone. is there a way that i can reprogram the phone myself and avoid any repair costs? i can't open the phone so i can't do the hard reset or restore factory settings. thanks.

You can try running a repair (this is done with the phone powered off):To repair the phone software
1.     Install PC Companion on a Windows PC from Support
2.     Turn on the phone, and connect it to the PC using a USB cable.
3.     In PC Companion, under Support Zone and click Start.
4.     Under Phone Software Update, click Start.
5.     Click repair phone.
6.     Follow the on-screen instructions. What are your thoughts about this forum? Let us know by doing this short survey.

I cant locate my phone via sony website please help my phone was stolen

i down loaded the the sony companion on my PC to try and locate my phone via google but i cant locate it

You do not need pc companion,you need:
device manager
or
myxperia.sonymobile.com
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

Please help on data "LOCKING"

I am writing a project needs a method to "lock" the data
from a database, which is a binary file. I seldom deal with
threads and can not find out the way. It will be very kind
if anyone can give me a clue or example, thanks

What do you mean when you say your database is a binary file? Are you talking about a database (hierarchical, relational, cube, etc), or are you talking about a file that exists on a file system, and all you want to do is lock and read it. BTW: All files are ultimately binary files. :)

Oh My Jesus PLEASE HELP!! Locked my iPad!!!

Helo
Ive set a passcode for my ipad and i forgot it now its locked like forever what can i do????

You must restore your operating system.
According to the User Guide, page 164-165:
In iTunes > Preferences select devices (without iPad connected) click delete backup, and confirm.
Restore iPad from an older backup if it includes everything but the passcode.

Please help.. My phone locked!!

Similar Messages

Maybe you are looking for