PLEASE HELP - NANO PLUS CAPAC

Please help.
My nano gb only holds around 250 songs yet says it is full??
Has anyone else experienced ths problem or any ideas to help.
Many Thanks

Well, the average song is around 4MB. GB is 024MB, so 250 songs will take up approximately GB. The rated capacity is based upon certain factors, like song length, compression quality, and audio codec used.

Similar Messages

  • Please help nano trouble!!

    i just bought my ipod nano it is brand new out the box and so i connected it to my pc (xp) downloaded itunes and was putting songs onto it then once that was done i closed itunes my ipod said it was safe to disconnect. then i went to turn it on the next day and it didnt work did turn on, no responce at all.
    i thought the battery may have been low so i tryed to connect it back to my pc and it wont charge or be reconised in any of my usb ports (which are working as i checked them) ???? please help !!
    thanks
    ipode nano 4 gb   Windows XP  

    Thank you thank you to you that answered this question.
    My iPod has been refusing to work for weeks, and I seemed to have tried everything but the most simple.

  • Zen nano Plus capac

    I know the Zen Nano Plus holds up to 500 songs in WMA, but what about Mp3 format at 28kps? Is there a real difference is sound quality from WMA to MP3?

    Duplicate post.

  • Please help, nano screen white/blank

    My ipod is remaining with a white/blank screen, it is able to play music, i can hear it, but there are no words, and i did not damage it in anyway, no water or physical damage, this is so strange, please let me know if you have any solutions...thanks much

    NEVER MIND I FIXED MY PROBLEM.....I am disappointed i didn't find much help on here....anyways a friend of mine gave me this in my email....i hope i can be of some help to anyone else who had the same problem
    BLANK SCREEN PROBLEM:
    This is caused because the contrast setting on iPL is quite buggy. When you boot iPL for the first time, the screen may be all dark or completely blank. To fix this you can either turn your iPod sideways until you see something then go to ‘Settings’ and then ‘Contrast’ and fiddle with it until you see the Linux. If this does not work, follow this procedure:
    1. Spin around the click wheel and you should hear some clicking sounds. This means iPL is working.
    2. Spin the click wheel around COUNTER-CLOCKWISE until the clicking stops. This will set the selector to the very top.
    3. Spin the wheel CLOCK WISE until you hear 2 clicks. This will put the selector to ‘Settings’. Do this nice and slow. Now press the middle button to select it.
    4. Spin the wheel CLOCKWISE until you hear 4 clicks. This should select the contrast menu. Press the action button to enter it.
    5. Turn the wheel CLOCKWISE to make the screen darker, and COUNTER-CLOCKWISE to make it lighter. The wheel is very sensitive to this so do it slow.
    6. If there is no sound during this process, try going to a very bright area and attempting to see the black selector bar on the screen.
    If these both don’t work, you’re in trouble! Use the Apple restore tool to restore your iPod and try again!

  • Please help Nano & Shuffle

    I have ver: 6 installed for my nano and it is working fine.My problem is i have a ipod shuffle and my computer doesn't recognise it.I'm using windows xp.Can i use both of these on my system.

    I have the same issue. I brought it back to the store and got a new one, but has the same problem. Which version of ipod software do you run, V1.1.2? And which program to put the songs on (WinAmp/iTunes)?

  • Please help: Nano frozen (very hot when recharging...)

    Hi,
    it seems my almost brand new (used 4 times...) Nano 2GB has got some problems
    When I'm recharging it (by Apple USB cable plugged into USB port on my WinXP Pro PC with last version of iTunes installed), it becomes really really hot on the back and the famous folder with exclamation comes out.
    - There's no charge icon or other icons...
    - Display is not lighting
    - Nano is not turned on (battery low and not recharging)
    - I tried to restore it pressing menu/play buttons for 10 seconds, the apple icon appeared but then I cannot turn the Nano on.
    Should I try something else or do I need to bring it back to the shop? What scares me more is the back getting so hot that you cannot keep nano in your hands.
    Thanks,
    Massimo

    I will bring the Nano back to the shop, hope they could help

  • Problem with zen-nano-plus!! please help

    i have the zen-nano-plus 52mb. and i try to update the firmware with latest version but i don't delete the music files in it.
    i have started the instalation and the program asked me to delete the files on zen. (i didn't care keeping the files, so i continue the instalation)
    when the program began to delete the files, after in few seconds i received an error messege from windowsoperating system reported error. the limit time on semaphore it's over.) now i have an 0.00.00 firmware version and i can't use the zen-nano because it's not starting. i have tried with the recovery tool but same situation it happend again. please help me if anybody knows something!!!!

    Go to Creative.com and click the Support link. Look for the firmware driver for your Zen Nano and follow the directions. I had to do this to fix my Zen Nano Plus, because it had the exact same problem that yours had.
    Good luck!

  • Please help me.... with my nano plus

    can someone please help me.. im having problem with creative zen nano plus.. it wouldnt play anymore wen i plug in the usb and open the folder, there is a warning said that the request could not be performed beacuse of an i/o device error.. what should i do with my nano plus? huhuhu please help me i already miss my nano plus....

    Go to Creative.com and click the Support link. Look for the firmware driver for your Zen Nano and follow the directions. I had to do this to fix my Zen Nano Plus, because it had the exact same problem that yours had.
    Good luck!

  • Help, Zen Stone and Nano Plus not recognized on my PC (XP) have tried everything I can f

    Hi,
    I recently bought a Zen Stone but I cannot get my PC to recognize it. Everytime it is plugged in I get taken to the "Found New Hardware Wizard" and it cannot find a driver. I have gone through all the help and none of the proposed solutions makes any difference. The Stone charges fine, but I cannot access it: in Device Manager it appears in Other Devices and does not appear in My Computer. The Safely Remove Hardware icon appears in the tray but when I right-click on it, nothing happens. The same thing is also happening with my older Zen Nano Plus which I am sure was recognized a couple of months ago. Both the Stone and the Nano PLus play music and I tried the Stone on a friends computer and her Windows XP recognised it fine. I am running Windows XP with Service Pack 2 and I automatically do all the recommended Windows Updates. Things I have tried: * Unplugging all other USB devices * Using USBs at back of computer * Using a paper clip to reset the Stone * Changing the Power Management options for USB as advised on Creative Media website * Updating my chipset device drivers * In Other Devices trying to reinstall drivers * Downloading new drivers and other software for my Zen Nano * In the BIOS switching off USB 2.0 * Rolling back from Windows Media to 0, removing Microsoft User-Mode Driver Frameworks Feature Pack .0, and downloading "Update for DRM - enabled Media Players (KB8922)" * Downlaoding Iomega patch * Running msconfig to remove all startup and Service files apart from Microsoft to ensure there is no conflict with other loaded software (still didn't work) Something has defintely changed in my computer to stop Zen from working and yet the USB ports work fine with my digital camera, printer, keyboard and mouse. Please, please, please, does anyone have any ideas about what may be causing my problem Thank you Stephanie

    Hi, Quick update, have also gone through everything in http://forums.creative.com/creativel...cending&page=3 and tried downloading the Fixup but with no success. Made the major mistake of following advice to delete USB controllers and ended up with no USB ports working (not good since my keyboard and mouse use USB). Had to do system restore to get back to square one. I have contacted Creative support several times and tried everything they suggested and they have tole me that there is nothing else I can try. Can find nothing else to try and with so many people experiencing the same problem with the Creative Zen's, I have come to the conclusion that the Zen is not compatible with many people's XP and only wish I had known all this before I bought it. If anyone has any other ideas I can try, please let me know, otherwise I will have to send my new Zen Stone back to Amazon as completely unusable. Goodness knows how anyone who doesn't know their way around a computer is ever supposed to get one working. I am really disappointed with Creative about this. Anyone recommend a good MP3 player make that actually works in Windows XP Regards Stephanie.

  • Help please w/nano plu

    Hello there! I am frustrated!! I see some others are having problems with the nano plus also. I am so ready to toss it aside and purchase another mp3 but not a creative one. Here are my problems.
    . It does not display on the device all the music that went through (per the computer). Ex. I downloaded 50 and only 48 tracks show. It shows I have tons of space left on the device and also on the computer. The same number of space is the same on both.
    2. How do you keep it from going into seperate folders? I have 30 something, or at least that is what is displayed. I use widows media.
    3. It will turn off during certain songs. I have tried to erase the whole thing and start over numerous times and then it will play those songs but turn off on some where the problem was not occurring.
    I have GB space. Now come on....48 tracks as the most it could have...never!!! Please help me. Thanks from down here in Texas

    How do you transfer files to the player? If they are protected you need to use Mediasource or Windows Media Player to transfer the songs, otherwise the licenses won't transfer. The default for Windows Media Player when creating WMA files from CD is with protection. I suggest that you make mp3 files from your CDs and transfer them to folders on the player using Windows Explorer. With certain firmware and WMA files the Nano Plus does at times have an issue of shutting off under certain circumstances. Using MP3 files also gets better battery life than using WMA files.

  • Please help - Capacity is full

    Please help....
    i have a 8GB 3rd gen ipod nano. i recently moved my whole itunes libary from an old laptop to my new lap top. everything went smoothly but it is now saying i have over 3GB of 'OTHER' in my capacity. i dont know what this is and i cant delete it. i only have music on my ipod and everything is in order there. could this problem be with me using the ipod as a disk to move onto my new laptop ?
    please please help me, i have tried everything but nothing works
    Jonny

    54MB is nothing. That's about what it should be.
    It's calendar, contacts, artwork and such.
    then I will lose all of my Nike+ information...
    Doesn't that info sync back to iTunes or the Nike+ website? (Don't have one so don't know how it works)

  • Please Help! Nano won't update...A DOOZY!

    The 4G 2nd Gen Nano was mistakenly formatted for Mac and not Windows. It was "reset" and now "shows" in iTunes as Windows format, however when it is plugged in it is stated that "there has been an ipod that itunes has detected an ipod in recovery mode. You must restor this ipod before it can be used in itunes." It shows the nano, size and serial number and format:Windows, however it shows capacity: n/a.
    When I hit "update" a box pops up and says "automatically checking for updates is disabled...etc" You can "check" or cancel" Cancel then brings no result. Nothing happens. "check" brings the box with " The ipod software update server could not be contacted. Make sure your network settings and connections are correct and your network connection is active or try again later." I have been trying for three days. The software IS up to date, I run three other ipod nanos (1st and 2nd gen) off of this itunes on this computer with NO problems or issues of any kind!
    PLEASE HELP ME before I go CRAZY with this thing!!
    Thanks!
    PC   Windows XP  

    The 4G 2nd Gen Nano was mistakenly formatted for Mac
    and not Windows. It was "reset" and now "shows" in
    iTunes as Windows format, however when it is plugged
    in it is stated that "there has been an ipod that
    itunes has detected an ipod in recovery mode. You
    must restor this ipod before it can be used in
    itunes." It shows the nano, size and serial
    number and format:Windows, however it shows capacity:
    n/a.
    When I hit "update" a box pops up and says
    "automatically checking for updates is
    disabled...etc" You can "check" or cancel" Cancel
    then brings no result. Nothing happens. "check"
    brings the box with " The ipod software update
    server could not be contacted. Make sure your network
    settings and connections are correct and your network
    connection is active or try again later." I have
    been trying for three days. The software IS up to
    date, I run three other ipod nanos (1st and 2nd gen)
    off of this itunes on this computer with NO problems
    or issues of any kind!
    PLEASE HELP ME before I go CRAZY with this thing!!
    Thanks!
    PC  
    Windows XP  
    WHEN I HIT RESTORE I meant, NOT update, RESTORE

  • I have one of the old macbooks and wish to hook it up to my tv. do i need a mini dvi to hdmi adapter plus a 3 rca phono lead with a jack for the sound. please help as im useless at this stuff. cheers

    i have one of the old macbooks and wish to hook it up to my tv. do i need a mini dvi to hdmi adapter plus a 3 rca phono lead with a jack for the sound. please help as im useless at this stuff. cheers

    First we need to know which one of the 9 different models of MacBook you have. To see which model you have go to the Apple in the upper left corner and select About This Mac, then click on More Info (and then System Report if you’re running 10.7 Lion). When System Profiler comes up check the Model Identifier and post it back here.
    The Late 2008 model 5,1 Aluminum Unibody and the Late 2009 model 6,1 and Mid 2010 model 7,1 White Unibody have a Mini DisplayPort. The Early 2006 model 1,1 through Early 2008 model 4,1s plus the Early and Mid 2009 model 5,2s have Mini-DVI ports. Each would take a different adapter to connect with the TV.

  • Somehow my entire itunes library got deleted ... I have the old ipod nano, which does not connect with iCloud so it has all been saved there, BUT .. I cannot load all my music that I put on and I no longer have the cd's PLEASE HELP!!!!

    PLEASE HELP!!!  Somehow my entire iTunes library got deleted, and I cannot sync all my music that I put on from cd's (which I no longer have). All the purchased music has been synced, but nothing else! All my other devices are synced with iCloud and lost the material as well ... I am so frustrated, because the nano has not been working properly, and I am afraid of losing it forever, and of course the cd's I backed everything with are MIA!!!! GRRR! Please HELP!!!
    Thank you so much!

    I can't tell from your post what you have and what you don't have. Are you saying the files are no longer on your computer, no longer on your iPod, or both?

  • I just bought an iPod nano 7th gen.  When I connect it to my laptop, it doesn't recognize the ipod.  I tried charging it, but now it won't turn on when i push the power button.  Please help me!  I don't want to have to return it.

    I just bought an iPod nano 7th Generation.  When i connect it to my laptop, it doesn't recognize the ipod.  I tried charging it but when I hold the power button, nothing happens.  I don't want to have to return it.  Please help me!

    Hi dnix257,
    Welcome to the Support Communities!
    What version of the Windows Operating System do you have?
    What version of the iTunes software?
    The troubleshooting steps below may help you with this:
    Apple - Support - iPod nano - iTunes Troubleshooting Assistant
    http://www.apple.com/support/ipodnano/assistant/itunes/#section_1
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/TS1369
    Cheers,
    - Judy

Maybe you are looking for

  • In BI Bex Query Designer output, dont want to have unit at column Heading..

    Hi I have a BI Bex Query Designer report showing output with Qty unit at Column Heading level. Even in KF's Text i didn't mention unit. I want unit to appear to column fields instead of column heading. Pls let me know how to do that. One more thing i

  • Mac on a desk mount...

    Ok, this might seem a bit odd. I also admit this thread isn't specifically related to the new Mac Pros, but to any modern tower Macs (or computers) in general: Is it possible that the harddrive is being damaged if you have the Mac (Pro, G5, whatever)

  • In FM mode it shuts off after 60 sec.

    Brand new, fully charged battery;.... in FM radio mode, ipod SHUTS ITSELF OFF after 60 sec. of play, FROM THE LAST TIME I TOUCH THE SCREEN. I made no default settings changes.Does the same thing repeatedly. I opened the pkg, charged ipod 4 hrs (USB2)

  • Issue with embedded website links in emails

    Hello all, First time on this forum and hopefully someone can help me with this issue, which popped up in the last few weeks.  Whenever there is a link in the emails that I received, the link is only underlined and highlighted up to about 30 or so ch

  • Why won't my serial number work?

    I'm trying to set up adobe photshop cs5 extended (student and teacher edition) and my serial number will not work.  It will take the numbers but not the letters so when i try to type it in I'm leaving two serial number boxes open and i can't move on.