Please Help! need to solve a problem in 9.1 (& 9.1.1)

ok...i have already reported this to apple...but i haven't heard from them so im losing my mind over this...
i have an edirol usb keyboard controller...which worked fine in logic 9.0.2
i could assign the knobs to exs24 for example & still continue to use a third party synth like syleth (to which the basic knobs auto assign..i.e cutoff, res, etc)
but in 9.1 something went wrong...now if i assign the cutoff knob to the exs24 cutoff using the learn function...it somehow breaks the default assignment in 3rd party synth...this happens to all knobs i assign...in other words...if i assign cuttoff to exs24..then cutoff stops working in sylenth but resonance will work..since i didn't assign that to exs24..but once i do..that will break as well...
this behavior is only present 9.1 onwards...i was hoping 9.1.1 would fix it..but it did not
i have been using 9.0.2 but that has the problem with cut notes in exs24...either way it seems to hinder my workflow...if anyone out there has any helpful hints or tips...please let me know!
btw...controllers in 9.0.2 still work fine...even though 9.1.1 is installed on the same system.

No, the controller assignments have been buggy with these issues since Logic 7.x.
I wrote a long post about these issues before, and sent them to Apple, but i haven't seen any particular changes or improvements to the controller assignments handling.
In short, if you are learning the same control to multiple synths depending on the instrument selected, up to some point it will randomly break and assignments will start conflicting, being lost, not being learnt, or other funky behaviour. It's not a consistent thing, the breaking is random, and in using the controller assignments this way you've just been lucky to not hit the bug so far. I don't think it's anything to do with version differences, although I've stopped investigating this in detail any more, so it's a possibility.
It's just one of the many issues in the controller assignments handling that I've given up on getting fixed, and have not used the controller assignments for anything complex since, which is a shame because if it worked it would be great.

Similar Messages

Dear , please help me to solve my problem in activating my iPhone Where I lost it since 3 months and when found it cannot activating my ID Where give me (Your Apple ID has been disabled for security reasons. To enable your account, reset your password at

Dear , please help me to solve my problem in activating my iPhone
Where I lost it since 3 months and when found it cannot activating my ID
Where give me (Your Apple ID has been disabled for security reasons. To enable your account, reset your password at applied.apple.com)
And try to reset my password but cannot please help me where am a poor man and cannot pay another money to solving this problem to any one
My iPhone data
Ime: ****
Model: A1332
FCC ID : BCG-E2380A
IC: 579C-E2380A
MY id at cloud ****
Password ( ****)
My country : Egypt
MY EMAIL : ****
Tell no: ****
<Personal Information Edited By Host>

The following may help:
Apple ID: 'This Apple ID has been disabled for security reasons' alert appears - Apple Support
If you didn't receive your Apple ID verification or reset email - Apple Support

Hello i have a unusual problem,anyway my iphone 4 wont turn on and when someone calls they hear ringing,but my phone doesent ring,so i open cimcas now ring off. Screen is just black,because it's turned off..Please help me to solve this problem..Thanks

Hello i have a unusual problem,anyway my iphone 4 wont turn on and when someone calls they hear ringing,but my phone doesent ring.So i poen simcase and now ring off. Screen is just black,because it's turned off..Please help me to solve this problem..Thanks

As far as trying to power up your device, make sure it has a good charge and then hold the button on the top of the phone and the home button on the faceplate together until the apple appears on the screen.

Hi, when ever I'm using 3G, on my Iphone4 sim stops working and Network is lost, this started after I updated my phone with 6.0.1(10A523)version. Please help how to solve this problem.

Hi, when ever I'm using 3G, on my Iphone4 sim stops working and network is lost, this started after I updated my phone with 6.0.1(10A523)version. Please help how to solve this problem. Thanks.

Photos/videos in the Camera Roll are not synced. Photos/videos in the Camera Roll are not touched with the iTunes sync process. Photos/videos in the Camera Roll can be imported by your computer which is not handled by iTunes. Most importing software includes an option to delete the photos/videos from the Camera Roll after the import process is complete. If is my understanding that some Windows import software supports importing photos from the Camera Roll, but not videos. Regardless, the import software should not delete the photos/videos from the Camera Roll unless you set the app to do so.
Photos/videos in the Camera Roll are included with your iPhone's backup. If you synced your iPhone with iTunes before the videos on the Camera Roll went missing and you haven't synced your iPhone with iTunes since they went missing, you can try restoring the iPhone with iTunes from the iPhone's backup. Don't sync the iPhone with iTunes again and decline the prompt to update the iPhone's backup after selecting Restore.

ýesterday my iphone 5c screen suddendly shows connect to itune and i try to restore it using itune but halfway i got a message error occured (14). please help me in solving this problem.

ýesterday my iphone 5c screen suddendly shows connect to itune and i try to restore it using itune but halfway i got a message error occured (14). please help me in solving this problem.

what did you learn when you search the internet for iPhone error 14?

Hello Sorry for the inconvenience, but I have a problem in Java I can not open files, audio chat, which type of jnlp after the last update of the Java 2012-004 Please help me in solving this problem.

Hello Sorry for the inconvenience, but I have a problem in Java I can not open files, audio chat, which type of jnlp after the last update of the Java 2012-004
Please help me in solving this problem.

Make sure Java is enable in your browser's security settings.
Open Java Preferences (in Utilities folder)
Make sure Web-start applications are enabled.
Drag Java 32-bit to the top of the list.
jnlp isn't an audio file format. It's just a java web-start program (Java Network Launching Protocol).

I just bought iphone5 last 2 weeks.At first week i can use itune apps after these last 3 days i try to use itunes again and i couldnt open it...same as app store...please help me to solve my problem...thanks and god bless...

i just bought iphone5 last 2 weeks.At first week i can use itune apps after these last 3 days i try to use itunes again and i couldnt open it...same as app store...please help me to solve my problem...thanks and god bless...

Thanks Jakob. You are correct.
I just finished another "experiment".
I transcode the whole clip 1,2,3,4,5,6,7 to another ext Western Digital HDD and got the Error -50 too. Problem is this ext Western Digital HDD is Daisy chained to the LaCIe.
So, I tried transcoding to another ext Western Digital HDD connected to my router. And this time NO PROBLEM.
So, I should readjust the FW800 connectors.
What do you mean by the controller of the Firewire ?
Thanks
Jakob Peterhänsel wrote:
All I'm saying is, the error -50 from the Finder normally means there is something spooky going on.
Here, the LaCie drives become unstable. In the few cases where I'v actually opened the cage and put the HDD into another mount, the HDD seems to be fine, so I suspect it's either the FW connectors of the controller itself.
If the drive is under warranty, replace it, otherwise, move your data to another drive if it startes to do so frequently.
Here, the drive will 'behave' normally for some time after a reboot of the OS, but it's a pain to reboot every X hours...

I need make icloud account but tell me the operation couldn't be completed please iam need to solve this problem necessary, Thank you

i need make icloud account but tell me the operation couldn't be completed please iam need to solve this problem necessary, Thank you

Why don't you use the option "Get a Free Apple ID" to create a new iCloud account with a free @icloud.com email address for all the iCloud service like Mail, Contacts, Calendars, Reminders, Notes Storage & Backup etc.?
This would be the easiest way.

Hello Experts Please help me to solve this problem.

Hello Experts,
I am getting a problem while installing the SOLUTION MANAGER 4.0.
in step 17/45 IMPORT ABAP :
the problem is :
ERROR 2008-04-29 03:10:28.110
CJS-30023 Process call '/usr/sap/SLM/SYS/exe/run/R3load -testconnect' exits with error code 2. For details see log file(s) R3load.exe.log.
when i saw R3load.exe.log file it has the following contain :
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
/usr/sap/SLM/SYS/exe/run/R3load: START OF LOG: 20080428095833
/usr/sap/SLM/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#13 $ SAP
/usr/sap/SLM/SYS/exe/run/R3load: version R7.00/V1.4 [UNICODE]
Compiled Jul 14 2007 02:19:03
/usr/sap/SLM/SYS/exe/run/R3load -testconnect
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12505
DbSl Trace: CONNECT failed with sql error '12505'
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12505
DbSl Trace: CONNECT failed with sql error '12505'
(DB) ERROR: db_connect rc = 256
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12505
DbSl Trace: CONNECT failed with sql error '12505'
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12505
DbSl Trace: CONNECT failed with sql error '12505'
(DB) ERROR: DbSlErrorMsg rc = 99
/usr/sap/SLM/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/SLM/SYS/exe/run/R3load: END OF LOG: 20080428095834
Please can any body help me to solve this problem.
waiting for fast response, as my installtion is pending due to this problem.
have a nice day.
Regards,
Shivendra.

Hi,
The following should be verified:
(1) check what DB instances the listener currently is aware of. This can be done with the command 'lsnrctl services'.
(in case you listener does not have the default name LISTENER, then use 'lsnrctl services <listener name>' )
(2) Perhaps there is an issue with the dynamic instance registration, even though the error code is different, you should nevertheless check the points from note #563574.
(3) Verfiy the value of the parameter local_listener (see mentioned note). Since you have changed the listener, the parameter might still be wrong.
In case local_listener is correcly set you should give the command
ALTER SYSTEM REGISTER;
a try.
Best Regards,
Michael

HT1918 I would like to change my Visa card from the account but its not changing and the billing information is not changing and I can't purchase any thing from my account its now not usable please help me to solve the problem

I would like to change my Visa card from the account but its not changing and the billing information is not changing and I can't purchase any thing from my account its now not usable please help me to solve the problem

You made a purchase and exhausted the credit on your card before it processed. All purchases are final. Contact iTunes Store support. You need to settle up before you can purchase or download anything else.

Please help me to solve the problem ---it's urgent

hi everybody
my application is deployed on the weblogic 9.0. I am using the VB DLL through which i am sending the request to the servlet.
When i am pressing the "Color" button in VBDLL to retrieve the color information, server takes the long time nearly 10-12 minutes to return back the color information but it throws the following error
<Error> <WebLogicServer> <BEA-000337> <[STUCK] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)' has been busy for "621" seconds working on the request "Http Request: /sales/appFindSize.jsp", which is more than the configured time (StuckThreadMaxTime) of "600" seconds. Stack trace:
java.lang.Object.wait(Native Method)
java.lang.Object.wait(Object.java:474)
javelin.client.JobWaiter.blockUntilFinished(JobWaiter.java:45)
javelin.client.ClientUtilsImpl.build(ClientUtilsImpl.java:838)
weblogic.servlet.jsp.JavelinxJSPStub.compilePage(JavelinxJSPStub.java:244)
weblogic.servlet.jsp.JspStub.prepareServlet(JspStub.java:200)
weblogic.servlet.jsp.JspStub.prepareServlet(JspStub.java:164)
weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:224)
weblogic.servlet.internal.ServletStubImpl.onAddToMapException(ServletStubImpl.java:383)
weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:298)
weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:165)
weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3022)
weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:1925)
weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:1848)
weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1288)
weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
weblogic.work.ExecuteThread.run(ExecuteThread.java:179)
please help me to solve this error it is urgent.
Thanks in advance
Pandurang S. Pokharkar

Exchange rates can be entered as a direct or indirect quotation. You can maintain two prefixes that
can be used to differentiate between direct and indirect quotations exchange rates during input and
display. If you don´t set up a prefix, the standard setting is valid:
 (blank, without a prefix) for direct quotation exchange rates
 / for indirect quotation exchange rates
n Scenario 1: If you use mainly direct quotation exchange rates and indirect quotation occurs seldom,
use the default configuration. In this way you can enter direct quotation exchange rates without a
prefix.
n Scenario 2: If, in addition to direct quotation exchange rates, the handling of indirect quotation is
required, you should define a prefix that is not blank for both quotation types, e.g.:
 * for direct quotation exchange rates, / for indirect quotation exchange rates
 If you follow this suggestion, the configuration does not allow exchange rates to be entered
without a prefix, an error message occurs. Thus users are forced to consider which the correct
quotation is and enter the rate with a valid prefix.
n Scenario 3: If indirect quotation is the major notation at your company, you can configure the
settings this way:
 * for direct quotation exchange rates, (blank) for indirect quotation exchange rates
 This configuration allows indirect quotation exchange rates to be entered without a prefix whereas
the less used direct quotation exchange rates have to be entered with a prefix.

HT5019 unable to get turn on display after turning on the power button ,no caps lock is turning on too,even a light at unlock button to open display is not going down , mine was a late 2008 mac book pro ( 17 inch ).please help me to solve my problem

unable to get my screen on even after turning on power button .
light at display unlock was not going down ,
no caps lock button turning on .
please help me to rectify my problem apple community

unable to get my screen on even after turning on power button .
light at display unlock was not going down ,
no caps lock button turning on .
please help me to rectify my problem apple community

URGENT: please help me to solve this problem

I'm trying to find a way to count how many times a number has been inputted in a loop but unable to find a calculation to find the answer,
can anyone help??
Please take me step by step on how to solve this problem as I'm new to Java.

Stinkin' crossposter!
http://forum.java.sun.com/thread.jspa?threadID=605663

Please help me to solve this problem.

Hi , can someone help me to solve the following problem:
1) I wrote two different client and server program, (Using UDP)
2) In the server side for testig I wrote some code like when a client sending message to server
a) server find on the database only senders IP address then server return the message to sender
b) Again if server find out other IP address too then it returns to them too
3) but it working for (a) , but not for (b)
4) Actually, its sending message but client not getting it
So, can some tell me, how to modify server or client side
Server wont reply the msg to the same IP address/ Sender who sent the message.
Server will reply the message to other person..
For example, Alace, Bob and Carrry are three clients. Alace, Bob, and Carry are online now. When they get online server save there IP address.
Now, Bob sends a message to server , then server will send the message to Alace and Carry. Not to the sender Bob.
Thanks]
I am giveing a pice of coding of server side
else
IPAddressObject addressObjectt;
onlineUserList.reset();
for(int i=0; i<onlineUserList.lengthIs(); i++)
addressObjectt=(IPAddressObject)onlineUserList.getNextItem();
IPAddress=addressObjectt.getAddress();
System.out.println("\n this is not same : "+IPAddress);
if(addressObject.compareTo(addressObjectt)!=0)
System.out.println("\n this is not same : "+sentence);
String cSentence=sentence.toUpperCase();
sendData=cSentence.getBytes();
DatagramPacket sendPacket= new DatagramPacket(sendData, sendData.length, IPAddress,port);
System.out.println("\n aaaaaaa : "+IPAddress);
client.send(sendPacket);
else
System.out.println("\n this is same : "+sentence);
String cSentence= sentence.toUpperCase();
sendData=cSentence.getBytes();
DatagramPacket sendPacket= new DatagramPacket(sendData, sendData.length, IPAddress,port);
client.send(sendPacket);
System.out.println("\n this is same : "+cSentence);
}//for
}//else
Edited by: kidylimp on Apr 8, 2008 12:16 PM

This looks suspiciously like a cross-post
[http://forum.java.sun.com/thread.jspa?threadID=5283608]

Help needed in solving a problem, thanks. Code Attached..

Hello All
I am facing a problem working with Berkely DB 4.5.20. I am trying to search in the database whether the key is already present or not. It is working fine with Microsoft Visual Studio but when i use the same code with Code::Blocks editor and MinGW compiler. It is not workig fine.
The code for searching the key is*****
bool CDbProject::IsKeyIndexAvailable(ProjectKey ProKey, UINT DataIndex)
int ret=0;
Dbc *cursorp;
bool flag=false;
cursor(NULL, &cursorp, 0);
//set the key
Dbt key(&ProKey, sizeof(ProKey));
Dbt data;
//search the database for the key.
ret = cursorp->get(&key, &data, DB_SET);
//ret = cursorp->get(&key, &data, DB_NEXT); //Rohit
if (!ret)
{ //if found check if the index is same
do
ProjectDataDetail *myProjDetails;
myProjDetails = (ProjectDataDetail*)data.get_data();
if (myProjDetails->uIndex==DataIndex)
flag = true;
break;
} while (cursorp->get(&key, &data, DB_NEXT_DUP) == 0); //Loop all the duplicate
if (cursorp != NULL)
cursorp->close();
return flag;
And the function to save the data in the database is *******
int CDbHandler::Put(void* pKey, size_t nKeyLen, void* pData, size_t nDataLen)
     int ret = 0;
     Dbt key(pKey, nKeyLen);
     Dbt data(pData, nDataLen);
ret = put(NULL, &key, &data, DB_NODUPDATA);
if (ret==-30996)
ret = ERR_PROJECT_KEY_DATA_ALREADY_EXISTS;
return ret;
Please help...
Thanks in advance,,,
Message was edited by:
user610238

Thanks for the reply Sandra
I try to tell what is happening in the search key function, If still not possible, then i will try to create a stand alone application...
bool CDbProject::IsKeyIndexAvailable(ProjectKey ProKey, UINT DataIndex)
int ret=0;
Dbc *cursorp;
bool flag=false;
cursor(NULL, &cursorp, 0);
//set the key
Dbt key(&ProKey, sizeof(ProKey));
Dbt data;
//search the database for the key.
// SANDRA......If i use DB_SET,as you can see below. It is not able to find the key at all. BUt if i use DB_NEXT, then it is able to find the first key only everytime with the data also (Even if i am looking for some other key, it will find the first key saved always..)
ret = cursorp->get(&key, &data, DB_SET);
//ret = cursorp->get(&key, &data, DB_NEXT); //Rohit
if (!ret)
{ //if found check if the index is same
do
ProjectDataDetail *myProjDetails;
myProjDetails = (ProjectDataDetail*)data.get_data();
if (myProjDetails->uIndex==DataIndex)
flag = true;
break;
} while (cursorp->get(&key, &data, DB_NEXT_DUP) == 0); //Loop all the duplicate
if (cursorp != NULL)
cursorp->close();
return flag;
}

Why my Safari stuck on reloading?...I already clear my data and history but stll...please help me to solve my problem

Please I need help!
<Email Edited by Host>

Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

Please Help! need to solve a problem in 9.1 (& 9.1.1)

Similar Messages

Maybe you are looking for