Please Help needed...Error while generating WebService Proxy..!!
Hi...
I am getting an Error when i try to generate a Web-Service Proxy on JDeveloper for one of the Oracle WorkFlow Services viz., the[b] "TaskService"
ie.,
http://host:port/integration/services/TaskService/TaskServicePort?wsdl
The wizard exits with a fatal warning ( WS-30033 -- which i believe indicates Validation of the WSDL failed..!?!) saying
"uniqueness constraint violation : exception (taskProxy.proxy.faultType already exists)
Could Anyone please Help me w.r.t this..?!?
My requirement is to provide a UI for accessing Human WorkFlow Services...other than JSP...So, i am planning to create a Web-Service PROXY for the important Workflow Services like TaskQueryService, TaskService, etc...& then use the "jars" of these clients to invoke the Web-Services...!
Is there ANY Simpler method of doing this..?!?
I've seen the Code of the UserSampleUI application, but i can't get a similar code working in my Eclipse...don't know Which JARS are required...?!
[i tried bpm-services.jar, & others...but it gives me a run-time exception of type PC Exception...!! :(]
If so, please Do let me know ASAP...!!
[By the way, ALL this is w.r.t. the [b]10.1.3.1.0 version of[b] Oracle SOA Suite...]
Awaiting some response....
Thanks a lot in advance..!
Hi Calvin,
You may want to try the 'no data binding' option on the proxy generation. This may enable you to go ahead, with a proxy that is not trying to generate Java code.
Yo can also try to make a local copy of your WSDL and remove the duplicate type declaration. Using the analyze command from WSA CLI is a quick way to do this itterative testing, as it will not generate the code. Once you have the analyze command going thourg the WSDL, you can go back to using genProxy.
You can find the documnetation here:
http://download.oracle.com/docs/cd/B32110_01/web.1013/b28974/wsassemble.htm#CHDBBDBF
Hope it helps,
-Eric
Similar Messages
-
Error while generating WebService Proxy..!!
Hi...
I am getting an Error when i try to generate a Web-Service Proxy on JDeveloper for one of the Oracle WorkFlow Services viz., the[b] "TaskService"
ie.,
http://host:port/integration/services/TaskService/TaskServicePort?wsdl
The wizard exits with a fatal warning ( WS-30033 -- Validation of WSDl failed?!) saying
"uniqueness constraint violation : exception (taskProxy.proxy.faultType already exists)
Could Anyone please Help me w.r.t this..?!?
[By the way, ALL this is w.r.t. the [b]10.1.3.1.0 version of[b] Oracle SOA Suite...]
Awaiting some response....The same problem was encountered by be.
The WSDL is correct and WS-I compliant. The limitation lies with the code generator. I was not really thrilled to see the error.
Used this to find out where the wsdl was failing:-
java -jar wsa.jar -analyze -debug -wsdl "D:\WFTask\TaskService.wsdl"
The problem was
<element name="staleObjectFault" type="tns:faultMessageType"/>
<element name="operationErroredFault" type="tns:faultMessageType"/>
in TaskService.xsd.
For the workaround I copied (faultMessageType) and created a new complexType
<complexType name="faultMessageType2">
<sequence>
<element name="faultInfo" type="xsd:string"/>
<element ref="task:task"/>
</sequence>
</complexType>
and changed the element defination to
<element name="staleObjectFault" type="tns:faultMessageType2"/>
Problem resolved. Generation successful. Yet to test at runtime.
Hope this helps.
Sashwat
http://tech-sash.blogspot.com -
Error while generating client proxy
Hi All,
I have got a WSDL file for which I am generating the client proxy. It is giving me a dump saying that, memory is not sufficient while generating the proxy.
I have also contacted the basis team, even after increasing the memory... we are facing the same issue. Can anyone suggest any solution or SAP Note if there are any???
Thanks in advance.
Bhargava.Hi,
Please find the dump details below:
ST22 DUMP:
Short text
No storage space available for FORM stack.
What happened?
Each transaction requires some main memory space to process
application data. If the operating system cannot provide any more
space, the transaction is terminated.
What can you do?
Note which actions and input led to the error.
For further help in handling the problem, contact your SAP administrator
You can use the ABAP dump analysis transaction ST22 to view and manage
termination messages, in particular for long term reference.
Try to find out (e.g. by targetted data selection) whether the
transaction will run with less main memory.
If there is a temporary bottleneck, execute the transaction again.
If the error persists, ask your system administrator to check the
following profile parameters:
o ztta/roll_area (1.000.000 - 15.000.000)
Classic roll area per user and internal mode
usual amount of roll area per user and internal mode
o ztta/roll_extension (10.000.000 - 500.000.000)
Amount of memory per user in extended memory (EM)
o abap/heap_area_total (100.000.000 - 1.500.000.000)
Amount of memory (malloc) for all users of an application
server. If several background processes are running on
one server, temporary bottlenecks may occur.
Of course, the amount of memory (in bytes) must also be
available on the machine (main memory or file system swap).
Caution:
The operating system must be set up so that there is also
enough memory for each process. Usually, the maximum address
space is too small.
Ask your hardware manufacturer or your competence center
about this.
In this case, consult your hardware vendor
abap/heap_area_dia: (10.000.000 - 1.000.000.000)
Restriction of memory allocated to the heap with malloc
for each dialog process.
Parameters for background processes:
abap/heap_area_nondia: (10.000.000 - 1.000.000.000)
Restriction of memory allocated to the heap with malloc
for each background process.
Other memory-relevant parameters are:
em/initial_size_MB: (35-1200)
Extended memory area from which all users of an
application server can satisfy their memory requirement
Error analysis
You attempted to extend a stack, but the required storage spac
not available.
Storage request..............: 8450048 bytes.
How to correct the error
Please check whether uncontrolled recursive calls caused this
runtime error.
Try to decide by analysis whether this request is
reasonable or whether there is a program error. You should pay
particular attention to the internal table entries listed belo
System environment
SAP-Release 701
Application server... "dcr"
Network address...... "10.1.105.112"
Operating system..... "AIX"
Release.............. "6.1"
Hardware type........ "00C834224C00"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 4 -
Error While Generating the Proxy Objects
Hi All,
While Generating the Proxy Obects in SPROXY at SAP R/3 side,
Iam getting this Error
http://img169.imageshack.us/img169/5752/proxylm0.jpg
Can any one Occured this type of Error
Regards
SumanHi PT,
Now the Strange Issue came,
While generating the proxy objects i got that above mentioned error
After that i have run the 3 report programs according to the Ramesh Suggession
Now if i goto SPROXY means it is saying that No Conection to Integration Builder .
I have checked the RFC Destination created in SM59 of SAP R/3 of Type H.It is fine
What more i have to check
First of all when ever i open the Sropxy, every time User & pwd is requesting
Can you please through a light where to check
Regards
Suman -
Error while generating ABAP proxy
Hi,
We created a WSDL using lotus notes (Domino) tools. While creating a proxy object using ABAP (transaction SE80), we get the error message "Cannot generate proxy (object missing in WSDL, see long text)" Message no. SPRX084.
We looked at OSS notes and applied 1046046 - Proxy generation problem with external definitions and all dependent notes as we are on a lower support pack. (WAS 6.40. SAPKB64019).
We are wondering if it is anything to do with the format/defintions in the WSDL. Can anyone send me a sample WSDL file that has been used to create an ABAP proxy object successfully. We would like compare the domino generated file. Please note that XI is not involved, we are using ABAP to call a webservice in the internal network application.
Thanks,
GirishHi,
I've implemented this proxy without problem and it's working fine in my case (I didn't have to store WSDL file localy and do any changes in it - Netweaver 7.2). If it's not SAP issue as Brad proposed then maybe network admins have set filters that are blocking communication with this service
Best regards
Marcin Cholewczuk -
Error while generating webservices using Date
I am facing the following problem while generating a web service which is having Date as one its members.
I have serialized a class with the following DataStructure
private String rowId1;
private Date created;
private String name;
private String quoteNum;
private String revNum;
private String curcyCd;
private String activeFlg;
private Number discntAmt;
private Number discntPercent;
When i tried to expose this as webservice, If I use the class oracle.jbo.domain.Date for Date type, the webservice is not generated properly. It is not including the method which contains this call. ie) This method is not present in the WSDL file as well as in the proxy.
When I used java.util.Date instead of oracle.jbo.domain.Date, I am able to expose the method and webservice got generated properly. But When i tried to generate the proxy for the WSDL in the consumer, I go the following error.
oracle.jdeveloper.webservices.model.GenerationException: Proxy generation failed for the following reason:
at oracle.jdeveloper.webservices.model.proxy.ProxyGenerator.doGeneration(ProxyGenerator.java:608)
at oracle.jdeveloper.webservices.model.proxy.ProxyGenerator.generateImpl(ProxyGenerator.java:365)
at oracle.jdeveloper.webservices.model.proxy.ProxyGenerator.mav$generateImpl(ProxyGenerator.java:77)
at oracle.jdeveloper.webservices.model.proxy.ProxyGenerator$1ThrowingRunnable.run(ProxyGenerator.java:206)
at oracle.jdeveloper.webservices.model.GeneratorUI$GeneratorAction.run(GeneratorUI.java:446)
at oracle.ide.dialogs.ProgressBar.run(ProgressBar.java:551)
at java.lang.Thread.run(Thread.java:595)
Caused by: java.lang.RuntimeException: generator error: no encoder for type "{http://www.w3.org/2001/XMLSchema}dateTime" and Java type "java.lang.String"
at oracle.j2ee.ws.common.processor.Processor.runActions(Processor.java:105)
at oracle.j2ee.ws.tools.wsa.AssemblerTool.run(AssemblerTool.java:99)
at oracle.j2ee.ws.tools.wsa.WsdlToJavaTool.createProxy(WsdlToJavaTool.java:354)
at oracle.j2ee.ws.tools.wsa.Util.createProxy(Util.java:838)
at oracle.jdeveloper.webservices.model.proxy.ProxyGenerator.doGeneration(ProxyGenerator.java:549)
... 6 more
Caused by: generator error: no encoder for type "{http://www.w3.org/2001/XMLSchema}dateTime" and Java type "java.lang.String"
at oracle.j2ee.ws.common.processor.generator.GeneratorBase.doGeneration(GeneratorBase.java:181)
at oracle.j2ee.ws.common.processor.generator.GeneratorBase.perform(GeneratorBase.java:137)
at oracle.j2ee.ws.common.processor.Processor.runActions(Processor.java:97)
... 10 more
I am referring to "Entity and view objects based on web service " in the following URL
http://radio.weblogs.com/0118231/stories/2004/09/23/notYetDocumentedAdfSampleApplications.html#93
Thanks and Regards,
JamesHi all,
I have applied the consolidated JRI fixes - patch 17191279 .
Then, when generating Jar, received keypass is tampered error.
re-generated the key using $ adjkey -initialize.
Now, its working fine.
Regards,
Krish. -
Error while generating ABAP proxy client
Hi,
I want to consume a webservice.
webservice URL is http://www.w3schools.com/webservices/tempconvert.asmx?WSDL
I can import WSDL in soapUI and get the response.
But while generating proxy in SAP, ( SE80 -> Enterprise Service ->service consumer -> URL/HTTP Destination -> URL -> local object -> complete ) it throws the following error:
Exception occurred in communication framework:Error in HTTP
Framework:404conn failedhttp://www.w3schools.com/webservices/tempconvert
.asmx?WSDL
Thanks in advance,
RajkamalHi,
I've implemented this proxy without problem and it's working fine in my case (I didn't have to store WSDL file localy and do any changes in it - Netweaver 7.2). If it's not SAP issue as Brad proposed then maybe network admins have set filters that are blocking communication with this service
Best regards
Marcin Cholewczuk -
Very urgent help needed- Error while passing XML document to Oracle stored
Hi !
I have been struggling a lot to call Oracle 9i stored procedure passing Stringbuilder object type from ASP.NET
I am using Visual Studio 2008 Professional, OS: Windows XP and Oracle: 9.2.0.1.0
Following is the procedure:
CREATE or REPLACE PROCEDURE loadCompanyInfo (clobxml IN clob) IS
-- Declare a CLOB variable
ciXML clob;
BEGIN
-- Store the Purchase Order XML in the CLOB variable
ciXML := clobxml;
-- Insert the Purchase Order XML into an XMLType column
INSERT INTO companyinfotbl (companyinfo) VALUES (XMLTYPE(ciXML));
commit;
--Handle the exceptions
EXCEPTION
WHEN OTHERS THEN
raise_application_error(-20101, 'Exception occurred in loadCompanyInfo procedure :'||SQLERRM);
END loadCompanyInfo ;
And following is the ASP.net code:
StringBuilder b = new StringBuilder();
b.Append("<?xml version=\"1.0\" encoding=\"utf-8\" ?>");
b.Append("<item>");
b.Append("<price>500</price>");
b.Append("<description>some item</description>");
b.Append("<quantity>5</quantity>");
b.Append("</item>");
//Here you'll have the Xml as a string
string myXmlString1 = b.ToString();
//string result;
using (OracleConnection objConn = new OracleConnection("Data Source=testdb; User ID=testuser; Password=pwd1"))
OracleCommand objCmd = new OracleCommand();
objCmd.Connection = objConn;
objCmd.CommandText = "loadCompanyInfo";
objCmd.CommandType = CommandType.StoredProcedure;
//OracleParameter pmyXmlString1 = new OracleParameter("pmyXmlString1", new OracleString(myXmlString1));
objCmd.Parameters.Add("myXmlString1", OracleType.clob);
objCmd.Parameters.Add(myXmlString1).Direction = ParameterDirection.Input;
//objCmd.Parameters.Add("result", OracleType.VarChar).Direction = ParameterDirection.Output;
try
objConn.Open();
objCmd.ExecuteNonQuery();
catch (Exception ex)
Label1.Text = "Exception: {0}" + ex.ToString();
objConn.Close();
When I am trying to execute it, I am getting the following error:
Exception: {0}System.Data.OracleClient.OracleException: ORA-06550: line 1, column 7: PLS-00306: wrong number or types of arguments in call to 'LOADCOMPANYINFO' ORA-06550: line 1, column 7: PL/SQL: Statement ignored at System.Data.OracleClient.OracleConnection.CheckError(OciErrorHandle errorHandle, Int32 rc) at System.Data.OracleClient.OracleCommand.Execute(OciStatementHandle statementHandle, CommandBehavior behavior, Boolean needRowid, OciRowidDescriptor& rowidDescriptor, ArrayList& resultParameterOrdinals) at System.Data.OracleClient.OracleCommand.ExecuteNonQueryInternal(Boolean needRowid, OciRowidDescriptor& rowidDescriptor) at System.Data.OracleClient.OracleCommand.ExecuteNonQuery() at Default.Button1Click(Object sender, EventArgs e)
I understand from this that the .net type is not the correct one, but I am not sure how to correct it. I could not find any proper example in any documentation that I came across. Most of the examples give information on how to read but not how to insert XML into Oracle table by calling Stored Procedure.
Can you please help me to solve this problem? I hope that you can help solve this.
Also, can you please give me an example of passing XML document XMLdocument to Oracle Stored procedure.
In both the cases, if you can provide the working code then it would be of great help.
Thanks,Hi ,
Additional to the Above error details my BPEL code looks like this:
<process name="BPELProcess1"
targetNamespace="http://xmlns.oracle.com/Application10/Project10/BPELProcess1"
xmlns="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
xmlns:client="http://xmlns.oracle.com/Application10/Project10/BPELProcess1"
xmlns:ora="http://schemas.oracle.com/xpath/extension"
xmlns:bpelx="http://schemas.oracle.com/bpel/extension"
xmlns:bpws="http://schemas.xmlsoap.org/ws/2003/03/business-process/">
<partnerLinks>
<partnerLink name="bpelprocess1_client" partnerLinkType="client:BPELProcess1" myRole="BPELProcess1Provider" partnerRole="BPELProcess1Requester"/>
</partnerLinks>
<variables>
<variable name="inputVariable" messageType="client:BPELProcess1RequestMessage"/>
<variable name="outputVariable" messageType="client:BPELProcess1ResponseMessage"/>
</variables>
<sequence name="main">
<receive name="receiveInput" partnerLink="bpelprocess1_client" portType="client:BPELProcess1" operation="process" variable="inputVariable" createInstance="yes"/>
<invoke name="callbackClient" partnerLink="bpelprocess1_client" portType="client:BPELProcess1Callback" operation="processResponse" inputVariable="outputVariable"/>
</sequence>
</process>
Kindly help if anyone has faced this Issue before.
Regards,
Rakshitha -
Error while generating new proxy-client
Hi,
I'm trying to generate a proxy-client from the following WSDL file: https://www.anlagenkataster.de/opencms/services/ZuesService?wsdl=1.1
Unfortunately the generation aborts everytime I try saying:
"Exception occurred in library handler
Incorrect value: Unknown Namespace http://schemas.xmlsoap.org/soap/encoding/"
I also tried the WSDL using SoapUI and it works fine...
Has anyone an idea how I will get ABAP to generate the client?
Thanks,
DennisChange encoding name space
<import namespace="http://schemas.xmlsoap.org/soap/encoding/"/>
to
<import namespace="http://schemas.xmlsoap.org/soap/encoding/" schemaLocation="http://schemas.xmlsoap.org/soap/encoding/"/>
After that also you will get error communication framework error then use below thread
Error in HTTP Framework: 404conn failed -
Urgent Help Needed : Error While deploying the composite to soa server
Hi ,
I an facing an issue in the deployment of the composite:
The error says that:
[12:50:56 PM] Error deploying archive sca_Project8_rev1.0.jar to partition "default" on server soa_server1 [http://ocmappsvr.outrigger.lan:8001]
[12:50:56 PM] HTTP error code returned [500]
[12:50:56 PM] Error message from server:
There was an error deploying the composite on soa_server1: Deployment Failed: Error occurred during deployment of component: BPELProcess1 to service engine: implementation.bpel, for composite: Project8: ORABPEL-01005
Failed to compile bpel generated classes.
failure to compile the generated BPEL classes for BPEL process "BPELProcess1" of composite "default/Project8!1.0*soa_16d80d3c-15dd-43c7-93e9-34a1e2398035"
The class path setting is incorrect.
Ensure that the class path is set correctly. If this happens on the server side, verify that the custom classes or jars which this BPEL process is depending on are deployed correctly. Also verify that the run time is using the same release/version.
[12:50:56 PM] Check server log for more details.
[12:50:56 PM] Error deploying archive sca_Project8_rev1.0.jar to partition "default" on server soa_server1 [http://ocmappsvr.outrigger.lan:8001]
[12:50:56 PM] #### Deployment incomplete. ####
[12:50:56 PM] Error deploying archive file:/C:/JDeveloper/mywork/Application10/Project8/deploy/sca_Project8_rev1.0.jar
(oracle.tip.tools.ide.fabric.deploy.common.SOARemoteDeployer)
I have noticed the following behaviour in the soa server:
1.When i try to deploy a composite without any bpel ,it gets deployed without any error
2.composite with bpel specification 2.0 gets deployed without any error
3.composite with bpel specification 1.1 doen not get deployed . throws the above mentioned classpath error
4. In the composite with bpel specification 1.1 when i replace the namespace "http://schemas.xmlsoap.org/ws/2003/03/business-process/"(comes with the BPEL 1.1 spec) with "http://docs.oasis-open.org/wsbpel/2.0/process/executable" (comes with BPEL 2.0 spec) ,it gets deployed without any error.
I really dont understand why this is happening.
This is coming up in the production environment so i can not uninstall the soa server or create a new domain.
Kindly help.
Regards,
RakshithaHi ,
Additional to the Above error details my BPEL code looks like this:
<process name="BPELProcess1"
targetNamespace="http://xmlns.oracle.com/Application10/Project10/BPELProcess1"
xmlns="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
xmlns:client="http://xmlns.oracle.com/Application10/Project10/BPELProcess1"
xmlns:ora="http://schemas.oracle.com/xpath/extension"
xmlns:bpelx="http://schemas.oracle.com/bpel/extension"
xmlns:bpws="http://schemas.xmlsoap.org/ws/2003/03/business-process/">
<partnerLinks>
<partnerLink name="bpelprocess1_client" partnerLinkType="client:BPELProcess1" myRole="BPELProcess1Provider" partnerRole="BPELProcess1Requester"/>
</partnerLinks>
<variables>
<variable name="inputVariable" messageType="client:BPELProcess1RequestMessage"/>
<variable name="outputVariable" messageType="client:BPELProcess1ResponseMessage"/>
</variables>
<sequence name="main">
<receive name="receiveInput" partnerLink="bpelprocess1_client" portType="client:BPELProcess1" operation="process" variable="inputVariable" createInstance="yes"/>
<invoke name="callbackClient" partnerLink="bpelprocess1_client" portType="client:BPELProcess1Callback" operation="processResponse" inputVariable="outputVariable"/>
</sequence>
</process>
Kindly help if anyone has faced this Issue before.
Regards,
Rakshitha -
Urgent help needed : Error while creating r-tree index
Hi All:
When i try to create an rtree index on a multipolygon layer am getting the following error . Am using the following statement:
CREATE INDEX SYSTEM.TEST_IDX ON SYSTEM.TEST("GEOMETRY) INDEXTYPE IS MDSYS.SPATIAL_INDEX PARAMETERS ('SDO_INDX_DIMS=2')
java.sql.SQLException: ORA-29855: error occurred in the execution of ODCIINDEXCR
EATE routine
ORA-00600: internal error code, arguments: [kope2upic954], [], [], [], [], [], [
Best Regards
Debasish SahuHi,
There is something wrong with the data as you loaded it.
Can you try to validate the geometries?
Thanks,
d -
Hi All,
I get a short dump while generating a proxy in the backend.I give the package and the prefix and end up with a short dump.
Does any one know why this mught come up
"Dynamic type conflict during the assignment of references."
background: I imported a WSDl provided by legacy into PI and created service interfaces and then trying to generate a proxy class while i get this error.
Thanks.Hi Shyamsundar,
I will explain a problem that I usually see in some developments:
XSD originally: XSD transformed:
Root -> Root
Tag 1 type int -> Tag 1 type int
Tag2 type string -> Tag2 type string
Tag3 type any - Tag3 type string
Normally the tag3 should have a XML inside. Then the ABAPers have to construct the tag3 with a CDATA structure (CDATA is used to put in an XML tag more XML tags inside like a text and no to be interpreted).
Later in SAP PI you can extract the cdata with an XSL, you can find some examples in the SCN.
I don’t like to convert the whole XML in only one string tag, because this makes difficult the develop for the ABAPers, although the work inside the PI is very easy because with an XSL you can extract the whole message easily. (You can find some examples in the SCN)
Regards. -
Error while generating PDF - in Bex Web
Hi Experts,
I am currently having the issue that I receive the error "Error while generating PDF" when using the "Print Version" functionality. This problem only occurrs for the Bex Web Query. I know that the ADS service is configured correctly- The webservice test is successful and other applications (Guided Procedures, MSS) also use it successfully.
Please see below the excerpt from the default trace:
A message was generated:
ERROR
Error while generating PDF
com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode PageExportRenderingRootNode_0001
Message: 28
Stack trace: java.lang.ArrayIndexOutOfBoundsException: 28
at com.sap.ip.bi.export.xfa.impl.SizeCalculator.getColumnSizes(SizeCalculator.java:178)
at com.sap.ip.bi.export.impl.ExportController.setSizes(ExportController.java:220)
at com.sap.ip.bi.export.impl.ExportController.calculateAndSetSizes(ExportController.java:611)
at com.sap.ip.bi.export.impl.ExportController.doExportPrep(ExportController.java:408)
at com.sap.ip.bi.export.impl.ExportController.convert(ExportController.java:336)
at com.sap.ip.bi.export.controller.ExportResult.createExport(ExportResult.java:58)
at com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode.createPDF(PageExportRenderingRootNode.java:453)
at com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode.doExport(PageExportRenderingRootNode.java:105)
at com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode.processRendering(PageExportRenderingRootNode.java:252)
at com.sap.ip.bi.webapplications.runtime.impl.Page.buildRenderingTree(Page.java:3809)
at com.sap.ip.bi.webapplications.runtime.impl.Page.processRenderingRootNode(Page.java:3867)
at com.sap.ip.bi.webapplications.runtime.impl.Page.processRendering(Page.java:3510)
at com.sap.ip.bi.webapplications.runtime.impl.Page.doProcessRequest(Page.java:3470)
at com.sap.ip.bi.webapplications.runtime.impl.Page.processRequest(Page.java:2489)
at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.doProcessRequest(Controller.java:892)
at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.processRequest(Controller.java:813)
at com.sap.ip.bi.webapplications.runtime.jsp.portal.services.BIRuntimeService.handleRequest(BIRuntimeService.java:456)
at com.sap.ip.bi.webapplications.runtime.jsp.portal.components.LauncherComponent.doContent(LauncherComponent.java:21)
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:522)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:405)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
If you have any idea or clue it would be greatly appreciated.
Thanks in advance for every support,
JanHi Jan,
Most possible causes for encountering this issue are:
Possible cause:
- The ADS is installed on a plattform, that is currently not supported by SAP for ADS. Please check the avaliablity at: Product Availability Matrix
- Mixing of different Netweaver releases (NW04 and NW04s) -> This is unfortunatelly not possibble the J2EE engine release has to match with the ABAP stack release in order connect them properly.
- The ADS SP level does not match the J2EE engine SP level. -> Please update the software components to have the same support package level.
Hope this helps!!
Regards,
Arafat -
Error while generating PDF in BI Portal
<body lang=EN-GB style='tab-interval:36.0pt'>
<p class=MsoNormal>Since 2 days ago we have on our productive BI Portal an
error and we <span class=SpellE>can`t</span> find a solution to it. When we try
to preview any report we get the <span class=SpellE>folowing</span> error: <span
class=GramE>" Error</span> while generating PDF". On development <span
class=GramE>an</span> test is working perfectly but on productive it gets that
error. We <span class=SpellE>don`t</span> know what happened so please help
us.><o:p></o:p></p>
<p class=MsoNormal><o:p> </o:p></p>
<p class=MsoNormal>In the log file we receive this message: A message was generated:<o:p></o:p></p>
<p class=MsoNormal>{<span class=GramE>code</span>} <o:p></o:p></p>
<p class=MsoNormal>ERROR<o:p></o:p></p>
<p class=MsoNormal>Error while generating PDF<o:p></o:p></p>
<p class=MsoNormal>com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode
PageExportRenderingRootNode_0001<o:p></o:p></p>
<p class=MsoNormal>Log ID: 001A64E8E1620067000000A8001E50BA00048279748984FA<o:p></o:p></p>
<p class=MsoNormal>Initial cause<o:p></o:p></p>
<p class=MsoNormal>Message: Service call exception; nested exception is: <o:p></o:p></p>
<p class=MsoNormal>com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException:
Invalid Response Code: (401) Unauthorized. The requested URL
was:"http://xxx:50000/AdobeDocumentServices/Config?style=document"<o:p></o:p></p>
<p class=MsoNormal>Stack trace: <span class=SpellE>java.rmi.RemoteException</span>:
Service call exception; nested exception is: <o:p></o:p></p>
<p class=MsoNormal>com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException:
Invalid Response Code: (401) Unauthorized. The requested URL
was:"http://xxx:50000/AdobeDocumentServices/Config?style=document"<o:p></o:p></p>
<p class=MsoNormal><span class=GramE>at</span> <span class=SpellE>com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData</span>(ConfigBindingStub.java:84)<o:p></o:p></p>
<p class=MsoNormal><span class=GramE>at</span> com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)<o:p></o:p></p>
<p class=MsoNormal>Caused by:
com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException:
Invalid Response Code: (401) Unauthorized. The requested URL
was:"http://xxx:50000/AdobeDocumentServices/Config?style=document"<o:p></o:p></p>
<p class=MsoNormal><span class=GramE>at</span>
com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.handleResponseMessage(MimeHttpBinding.java:986)<o:p></o:p></p>
<p class=MsoNormal><span class=GramE>at</span>
com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.call(MimeHttpBinding.java:1438)<o:p></o:p></p>
<p class=MsoNormal><span class=GramE>at</span> <span class=SpellE>com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData</span>(ConfigBindingStub.java:77)<o:p></o:p></p>
<p class=MsoNormal>... 57 more<o:p></o:p></p>
<p class=MsoNormal>{<span class=GramE>code</span>} <o:p></o:p></p>
<p class=MsoNormal>----
<o:p></o:p></p>
<p class=MsoNormal>Message: Unknown Error<o:p></o:p></p>
<p class=MsoNormal>Stack trace: <span class=SpellE>com.sap.ip.bi.base.exception.BIBaseRuntimeException</span>:
Unknown Error<o:p></o:p></p>
<p class=MsoNormal><span class=GramE>at</span> <span class=SpellE>com.sap.ip.bi.export.xfa.impl.Document.writeWidthsAsXmlToStream</span>(Document.java:339<o:p></o:p></p>
<p class=MsoNormal>----
<o:p></o:p></p>
<p class=MsoNormal><span class=GramE>at</span> <span class=SpellE>com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData</span>(ConfigBindingStub.java:77)<o:p></o:p></p>
<p class=MsoNormal>... 57 more<o:p></o:p></p>
<p class=MsoNormal><o:p> </o:p></p>
<p class=MsoNormal><span class=SpellE>com.sap.ip.bi.base.exception.BIBaseRuntimeException</span>
UNKNOWN_ERROR<o:p></o:p></p>
I only cutted the right messages Does anybody have some idea? Where i am unathorized? What shell i do?
Thanks in advance
Patrick
</div>
</body>check if you have adobe document services installed properly. ASk your portal admin team to check these messages,
-
Getting error in Portal "Error while generating the PDF" for BI Report
Hi Experts,
we are gettign the error while trying to generate the PDF file from the Reports.
Earlier it was working fine Adobe Reader 8 , currently we have upgrated Adobe Reader 9 in our system.
After this upggradation browser "*Failed to open PDF in Browser"*
Could you please suggest me how to diagnostic the error. Do we need to configre something in the Portal or in the Backend BI system for this.
Please suggest me the needful on this?
thanks
NarpalHello,
i am facing the same problem and found help by 925741:
"Error while generating PDF"
There is no more information available when clicking on the error.
Used Software:
Adobe 8
SAP_ABA 700 0018 SAPKA70018 Cross-Application Component
SAP_BASIS 700 0018 SAPKB70018 SAP Basis Component
SAP_BW 700 0020 SAPKW70020 SAP NetWeaver BI 7.0
PI_BASIS 2005_1_70 0018 SAPKIPYJ7I PI_BASIS 2005_1_700
BI_CONT 703 0013 SAPKIBIIQ3 Business Intelligence Content
Any other ideas?
Thanks,
Rainer
Edited by: Rainer SIGG on Mar 9, 2009 4:41 PM
Edited by: Rainer SIGG on Mar 9, 2009 5:27 PM
Edited by: Rainer SIGG on Mar 9, 2009 5:42 PM
Maybe you are looking for
-
Need help in understanding this line of code...
Hi, I am trying to modify an existing code and I came across this line. dorminLabel111.setText("<HTML> <b>18. %(demonstration_problem1_char)% was asked to solve an equation, and %(demonstration_problem1_char)% came up with the following solut
-
Ipod not working and I dont know why?
Can someone please help me? I closed my Ipod cause none of my apps were opening and i closed it and now all its doing is this.. (picture on the bottom) ; It has been doing this for over 20 minutes and i dont know what to do, can anyone help me? somet
-
Photoshop Elements 10 installation errors on Mac OS X Version 10.6.8
Been trying to install PSE 10 -- At first install got exit code 7 errors -- Try to download the "fix" -- Fix wouldnt download -- Chatted with Tech Support-- Chatted for a 2 1/2 hours -- Tried multiple things - -- Now the installation gets to about 2
-
Premiere Elements 10 stops working when using Pan&Zoom
After using Pan&Zoom on 2-3 pictures a message comes up that Premiere Elemets 10 stops working and will close down. Then I can start the program again and do the same on 2-3 pictures again. Any ideas what is going on?
-
Removing VESA mount from 27" iMac
So i have (had) an i7 on an articulating arm, and I had to return it. There's no instructions in the Apple VESA kit or online on how to re-attach the original stand (specifically how to take it off the 'locked' position). I called and after over half