Please help, new blackberry data transfer

I had to replace my Blackberry, and do not have the old one. I would regularly sync my old Blackberry and can view the contacts in Outlook, but don't know how to get them onto my Blackberry. PLEASE HELP.

I'm still very much a novice on a BB, after having used Palm products for years. But if I were you, I'd check to see if your desktop manager is the same version as your device - if not it can be downloaded. At that point syncing w/ your desktop ought to transfer the data if your syncronization is configured correctly. I hope this at least gets you started
Phil

Similar Messages

New Hire Data Transfer from E-Rec to ECC via PA48

Hi,
We have requirement where we need to use the basic new hire data transfer from erec to ecc using PA48.
Could someone help me by listing the step by step process that is required to configure in both EREC & ECC?
I know there is pdf document available online but that refers mostly to XI which we are not planning to use.
Please help.
Regards,
Vikram

Hi,
For integration between E-Rec and ECC, check [Link|http://help.sap.com/saphelp_erp2005/helpdata/en/45/8150635e9c40c1e10000000a1553f7/frameset.htm]
This gives detailed information on synchronous and asynchronous data transfers between E-Rec and ECC.
Hope it helps!
Arpita

Please help! Old dates on new photos?

I recently backed up my iphotos to disk(CD) as a precaution prior to upgrading to Snow Leopard. It appeared everything went smoothly however I'm noticing when I go into my "2010" Library, where all my photos were previously automatically organized by month/date, that the last 5 months now show "2004" as I scroll through. Even when "Get Info" on a photo that I took in December of 2010, it shows June 04, 2004.
My iphoto Library doesn't even start until 2006, which is when I got this iMac. And I now have an "Early Photos" in my Library that I don't believe was there before.
I can now only view photos from November and December 2010 when I go to the "Last 2 Rolls" or when I view the entire Library that has all the years. But even when I view all years, they are completely disorganized...2008 photos are mixed in with 2006 photos, etc. I'm considering upgrading to iPhoto 11 through the iTunes App store but I want to get my current photos back to the organized fashion they were in prior to my back-up to disk, which seems to be when the problem occured. Please help. Thanks!

Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Please Help: Unknown BlackBerry user-agent

I have been trying to download a mobile program designed just for Blackberrys. The web address begins with http://blackberry.    After I enter the address, I get the following error message:
Unknown blackberry user-agent   Mozilla5.0 (blackberry; U; blackberry 9330;en-US) Apllewebkit/534.1=(khtml, like Gecko) Version/6.0
Can anyone help me? I have been in touch with my mobile carrier and they tell me that its a bad website. I have been in touch with the website programmer who told me nothing is wrong with the link.
Thanks

Hi and welcome to the forums Kreyol!
A couple of places for you to visit: Blackberry 101     Tips & Tricks
You want to contact your provider (T-mobile) and make sure you have THE Blackberry data plan.
Happy to have you here!
IrwinII
Please remember to "Accept as Solution" the post which solved your thread. If I or someone else have helped you, please tell us you "Like" what we had to say at the bottom right of the post.

Please help me capturing data from HTML table

Hello Everyone,
Our Storage subsystem generates a html table containing all LUN allocation for printing. I am saving this html file on disk to collect all table infomation and to put it into a database.
I am having problems extracting table information from the html file. I tried using regular expressions but still not going anywhere. Below is a sample few lines from the html file.
Please your help is appreciated solving this problem how to collect this information from a HTML file or if Java has any class for this type of purpose.
Please advice
arsi
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">

<HTML><HEAD><TITLE>Volume Assignments</TITLE>
<META http-equiv=Content-Type content="text/html; charset=windows-1252">
<META content="MSHTML 6.00.2900.3020" name=GENERATOR></HEAD>
<BODY>
<TABLE cellSpacing=1 cellPadding=3 border=2>
<CAPTION>
<H2>Volume Assignments</H2></CAPTION>
<TBODY>
<TR vAlign=top>
<TH>Volume</TH>
<TH>Location</TH>
<TH>LSS</TH>
<TH>Volume Type</TH>
<TH>Size</TH>
<TH>Storage Type</TH>
<TH>Host Port</TH>
<TH>Host Nicknames</TH></TR>
<TR vAlign=top>
<TD>02A-25015</TD>
<TD>Device Adapter Pair 1
 Cluster 1, Loop A
 Array 2, Vol 042</TD>
<TD>0x10</TD>
<TD>Open System</TD>
<TD>000.9 GB</TD>
<TD>RAID-5 Array</TD>
<TD>Fibre Channel
 ID 00, LUN 502A</TD>
<TD>R1L01_0, R1L01_1, R2L08_1, R2L08_0, S3L06_0, S3L06_ 1, S4L06_0, S4L06_1</TD></TR>
<TR vAlign=top>

i wrote the programme for 2 stepper motor as attachment file below. they are run. but when the "start" button is ON then the "emergency stop" is not effects.
for "emergency stop" functions, i used 4 limit contactors. if one of them is "on" then the programme will be stop.
but in fact, when the system is running, i can not stop if one of the limit contacor is on.
cuold you please help me to do with this problem.
thanks
Attachments:
EMERGENCY STOP.vi ‏435 KB
toolpaths-ut.vi ‏64 KB
parallel program motor 1,2.vi ‏96 KB

SOMEBODY PLEASE HELP ME, CAN'T TRANSFER VIDEOS FROM IPOD

Okay, so, my english assignment is due in like 10 hours, and I CAN'T TRANSFER THE VIDEO FROM MY IPOD TOUCH TO THE COMPUTER. I'VE BEEN DREADING THIS. I recorded my english assignment via my iPod Touch because it has HD Video Recording. The video size turns out to be 694MB so no wonder why it won't copy. BUT PLEASE HELP ME WHAT CAN I DO TO GET IT OFF MY IPOD I NEED TO GET IT INTO A USB D:!

OH NO!!!!!!!! OH NO OH NO OH NO OH NO~~~~~~~~~!!!!!
I AM RUNNING WINDOWS XP, AND IT SAYS "Windows XP cannot import video files larger than 500 MB using Camera and Scanner Wizard." D:!!!!!!!! MINE IS 694. I'M SCREWED!
It gets to 100% and says error, when I'm using the scanner and camera wizard.
And when I copy it by dragging it to My Documents it just freezes and does nothing.
Yes, I can import videos, but I just found out my computers OS cannot import over 500MB D:!
HELP D:!

Please help new mac user is getting super frusturated with mail

I am trying to send a peice of mail to one of my friends but when i click send it says:The SMTP server “smtp.mac.com” rejected the password for user “PierceP”
Please re-enter your password, or cancel. But i type in my password and nothing changes. I even went into my preferences and changed the password but it still will not allow me to send mail. PLease help
Pierce

Hi again. It seems like there is information people are looking for to help you that they don't have. It occurs to me that you have a new Mac and you perhaps have an Apple Store with a Genius Bar in your area. A great experience for you might be to visit one and let them setup your mail for you (for free) and debug, if there is a problem of any sort. You can make an advanced reservation at Apple Stores at http://www.apple.com/buy/. Select the nearest store and make reservation. If you haven't been in an Apple Store, you're in for a treat.

Please help - New to Mac - File managment.. moving files, folders, deleting

Hello, I am hoping someone can help me...
I have just got one of the 24" iMacs at work and I have never worked on Mac before. I am having problems with documents/files.
I have made new folders in my "documents" folder but I cannot move/drag files into the folders. I also cant delete files from the documents folder.
I have spent the last 4 hours reading tutorials etc and still can't figure this out. I am guessing it's probably simple... but I just can't seem to find the answer.
PLEASE HELP!!!!!!

There are two documents folders. One shared among all user and a personal documents folder.
To get to the system folder you double click on the machintosh hd. You will see the system documents folder here. If you are not logged on with system administrator privileges, the files will be read only. To tell if you have administrator privileges, do:
apple icon > system preferences > accounts
click on your account and see if the allow user to administer this computer box is checked.
One way get your person documents folder, you double click on the machintosh hd. Next, click on the little house icon on the lower left side of the screen. This will get to all your personal files and folders. One of the folders is your documents folder.
I agree with the prior poster to find someone who has worked with the mac before to give you a quick tutorial.
I suggest you visit the local library or book store and checkout or buy a book on using Mac OS Tiger.
Robert

TS3991 Please help -- my iCal data has disappeared from iCloud website!

Hi -- I just opened iCal via the iCloud website on my MacBook Air. My calendar data appeared for a flash, then disappeared -- now almost ALL of my calendar data is completely gone from the iCloud website. I checked the calendar app on my iPhone 4 and the data is still there, so I turned on Airplane Mode on my phone hoping the blank calendar wouldn't sync to my phone that way. My contacts seem to still be there.
Please help -- where did the data go, and how can I get it back onto the iCloud website? Thanks in advance!

Thank you. You may have been right about the server glitch. After hours, literally, on the phone with Support trying to load the calendar from my phone, and finally giving up, my calendar on the website was magically restored 24 hours later.
I'm guessing I'm not the only one this happened to, and that they restored to an earlier version for me and whomever else's data was lost. Pretty scary, actually -- and annoying!
Thanks again for your help.

Please help new iPod touch won't sync

I've spent the last 3 nights on the phone with apple support trying to get past step 5 of 5 on iPod touch sync..,,I've given up support can't fix it what am I suppose to do? After all failed attempts the solution must be defective ipod I didn't think it was but I took it back got new one now it's doing same thing please please anyone please help me my old ipod works great as well as my iphone ipad I'm at wits end with this?? The only music I have is them ones is bought in iTunes my library gets to step 5 of 5 and won't finish them cancels sync

See if this previous discussion helps
https://discussions.apple.com/thread/5468491?tstart=0

Please Help - New Ipod

Hi,
I got an ipod with 30gb for Christmas - it came pre-loaded with 100 songs from the person who gave it to me. They created a playlist of all my favorite songs... which I love!!! However - when I come to hook it up to my pc/itunes it keeps asking me to delete everything on my ipod in order to put new songs on it... What do I do?????
Please Help!
Dell Inspiron Windows XP

Well, this is just guess but iPods are very ,uhm, protective about who can use what music, etc. Your fiend synched the pod to his/her computer to load the music that is what is causing the issue. I'd ask said friend to burn you a DVD of the playlist in question (not a back-up), wipe your pod on your computer, load the DVD ,and reinstall the music on to the pod via your computer. Hope that helps.
Cheers,
Chris
P.S. I say DVD because to get everything to work the music will be in AIFF format which takes up a lot of room. You could also break the play lists into more manageable sized chunks and use regualr CD's.
1.4 GHz Sonnet "digital audio",1.5 GB RAM, 500 GB SATA HD Mac OS X (10.4.8) Pioneer DVR-111D,FirmTek SeriTek 1V4, BFG 6800 GT oc, 30GB 5G video iPod

Please Help New version of Itunes 6.4 don't open.

Hi , today I decided to download quicktime with the new version of apple itunes on apple.com and since I downloaded that and upgraded my itunes is not opening anymore on my desktop.
There are absolutely no error messages it just don't open the program does not load.
I have tried reinstalling , deleting quicktime and redownloading another version of itunes and it still don't open. I never had troubles like that.
I am on Windows XP.
Any ideas ?
Please help thank you.
Windows XP

just checking something...does Quicktime open? Double check to make sure it is there, because iTunes cannot open without Quicktime. If not, DL a standalone version of Quicktime:
http://www.apple.com/quicktime/download/standalone.html
Also, what antivirus and spyware programs do you run on your Box? Some of them interfere with iTunes and Quicktime and cause it not to download properly. Post back and we will get it up and going.
Rachyl

Please help! Blackberry Torch 8610 stuck in white blank screen!

sorry for my bad english..
i'm indonesian ^^
before this problem happends, about 3 days ago i've got an error message saying built in media got an error so must repair it or wipe it.. i tried to repair it, but it keeps saying built in media repair failed. so i wipe it..
but, a couple of seconds after i click wipe built in media, my blackberry reboots by itself..
after it finished rebooting, my blackberry tells me built in media got an error again.
and i tried to wipe it again but my blackberry still rebooting it self again.
this happends 4 times in a row.
and then, when the fourth reboot finished, i tried to wipe it again..
and yes, the blackberry still rebooting itself again.
but, this time, my blackberry didn't finish rebooting, the loading bar stuck in 3/4 of the bar.
its stuck like that for 3 half days.
i tried to fix it with app updater, but its still stuck in 3/4 of the bar.
so today i tried to fix it with JL_cmder
i tried to restore it to factory default.. but it keeps failed connecting to the device..
the third time i tried, it got a white blank screen when reaching the 3/4 loading bar..
please help..
i would really appreciate your help.

Download BBSAK onto your computer. Connect your phone to the computer and close out BlackBerry Desktop Software as soon as it opens. Then start BBSAK and do the wipe from there. You should get a screen saying there is no OS. At this point you should be able to install the OS either from BBSAK or from the BlackBerry Desktop Software. Try it and report back.

Please help new to macs and my recently purchased power mac keeps freezing :-(

Hi apple community!
I recently purchased a power mac g5
Specs;
G5 power mac dual core (2.0)
Power pc 970 mp
Late 2005
I don't have an apple mouse/keyboard
I just use $40 wireless mouse keyboard.
Upon purchase everything seemed to work as it should....booted up, open and closing apps without freezing.
However I never had it connected to the Internet when I navigated through system.
I got it home and installed a 1 tb harddrive (WD mainstream desktop) from future shop. When I installed it in tower I had to buy a sata 2.0 cable as there was not one available for use. Booted up fine and installation went as my research said it should. Turned it on next day....
Tried to update iTunes and this is where it started actin up. First just froze had to turn off, second time wouldn't even boot up plus fans went into overdrive. Third forth fifth sixth boots fans sometimes kick in, now whenever I try to do any kind of action it freezes. (Only when I click something)
I read about possible power suppy issue, so I plugged tower and monitor into seperAte plugs,
They may however be in same circuit because they at in the same wall...would a power conditioner fix this?
Anyway still froze on any action tried...just opened disk drive...opened then frooze...?
Anybody have any ideas??
Please help
Not sure if this is correct OS ( looked up using serial #)
Max operating system OSX 10.5.8 leaporad
Earliest supported OSX version ; 10.4.2 tiger.

Sorry for the late reply. I want to thank you for taking the time to help me.
Not sure exactally where I could get something like this your speaking of.
Update; I have removed the harddrive and will most
Likely just use an external one, if the computer will even work.
I ended up taking it in to geeksquad at best buy, they had it for 3 days and also told me after the fact that neither of the techs working on it knew much about macs :-( needless to say I requested my
Money back due to the fact that the service I paid for could not be completed and literally couldn't tell me anything more than what's below.
They told me that they could not dock it with thier diagnostic machine, kept restarting on them and the one fella said it was overheating but had no idea why. When I brought it home again I tried it once more computer boots up to desktop as usual, this time had a asterisk window saying " the computer was restarted after mac OSX quit unexpectedly" however my cursor was again locked in the top left of the screen. Would not move, so I could not view the report, shortly after fans kicked into overdrive. I'm losing hope for this machine rapidly. I'm all ears when it comes to anything I may be able to do.
Should I try an actual apple keyboard/mouse just to eliminate that possible?
If you have ideas AWSOME, If not, no worries, ill take it into the mac store and see what they say
P.s the machine is clean inside little to no dust and the tech said he was going to clean it out, hard to tell if he did because it was clean clean before I brought it to him.
Thanks again for the help you have given me so far and in the future
I look forward to hearing back
Sincerally
Al

PLEASE HELP, new error when I try to sync my iPod!!!

The past two times I've tried to sync my iPod nano (4th gen.), a message comes up saying "The iPod, 'Emily's iPod', cannot be synced. An unknown error occured (-48)." Though it seems that my iPod is still being synced, this message pops up three times throughout the process & the songs don't appear on my iPod.
I really don't want to have to lose all my songs & start iTunes all over again! Can someone please help?

You might want to reset that ipod, if still getting error 48 then try a restore or a different USB port.
That worked for this person:
http://discussions.apple.com/thread.jspa?messageID=7852037

Please help, new blackberry data transfer

Similar Messages

Maybe you are looking for