Please help: New MSI R6770 with MSI MS-7093 main board doesn't POST

I'm upgrading my son's HP a1130n which has an OEM MSI MS-7093 main board. I purchased the MSI R6770 based on a local retailer's advice.
I took the following steps:
- upgraded the power supply to a Cooler Master RS500-PCARD3-US 500W
- set the BIOS to boot with PCI-E video
- installed video card, attached 6 pin power connector, and powered on
With the video card installed, the computer runs all fans at maximum speed. No POST beep.
After taking the card out, the computer returns to normal.
I thought I'd ask for advice here before returning the card. Thanks.

Thanks for the response.
I would have to purchase a card to try it. One of the main reasons I went with this card is that with the motherboard layout the RAM is directly in line with the PCI-E slot.  Many of the NVIDIA cards have a long form factor with a large fan housing that would physically interfere with the RAM.
So there's a known problem with the current generation of ATI cards on some motherboards?  In that case, going to a lower powered Radeon series wouldn't help?

Similar Messages

  • I am having a problem with pop pups and small windows with ads constantly opening up on my safari?? Thought that macs didn't get virus? this looks like one- any experts around? please help me fix it with your instructions? really don't know what to do...

    Hi everyone,
    I am having a problem with my Mac OS X 10.7.5 mac book air , there are constant pop pups and small windows with ads blinking constantly opening up on my safari in front of everything?? it is constantly interupting me and makes me mistakingly click on it then another new windows open behind the one im using..
    I am not too sure if thats a virus or trojan.. I always thought that macs didn't get virus? this looks like one to me… any experts around? please help me fix it with your instructions? really don't know what to do... thanks

    Those are not viruses. You have probably installed some malware:
    The Safe Mac » Adware Removal Guide
    Helpful Links Regarding Malware Protection
    An excellent link to read is Tom Reed's Mac Malware Guide.
    Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
    See these Apple articles:
              Mac OS X Snow Leopard and malware detection
              OS X Lion- Protect your Mac from malware
              OS X Mountain Lion- Protect your Mac from malware
              About file quarantine in OS X
    If you require anti-virus protection Thomas Reed recommends using Dr.Web Light from the App Store. It's free, and since it's from the App Store, it won't destabilize the system. If you prefer one of the better known commercial products, then Thomas recommends using Sophos.(Thank you to Thomas Reed for these recommendations.) If you already use Sophos, then be aware of this if you are using Mavericks: OS X Mavericks- Sophos Anti-Virus on-access scanner versions 8.0 - 9.1 may cause unexpected restarts
    From user Joe Bailey comes this equally useful advice:
    The facts are:
    1. There is no anti-malware software that can detect 100% of the malware out there.
    2. There is no anti-malware that can detect anything targeting the Mac because there
         is no Mac malware in the wild, and therefore, no "signatures" to detect.
    3. The very best way to prevent the most attacks is for you as the user to be aware that
         the most successful malware attacks rely on very sophisticated social engineering
         techniques preying on human avarice, ****, and fear.
    4. Internet popups saying the FBI, NSA, Microsoft, your ISP has detected malware on
        your computer is intended to entice you to install their malware thinking it is a
        protection against malware.
    5. Some of the anti-malware products on the market are worse than the malware
        from which they purport to protect you.
    6. Be cautious where you go on the internet.
    7. Only download anything from sites you know are safe.
    8. Avoid links you receive in email, always be suspicious even if you get something
        you think is from a friend, but you were not expecting.
    9. If there is any question in your mind, then assume it is malware.

  • I have an ipod 2g , The keyboard won't work! Or at least some of it's letters and numbers won't. please help i'm stuck with emojis

    i have an ippd touch 2g , a part of my keyboard won't work , i can type letters but i can't type numbers . please help i'm stuck with emojis keyboard

    Try restarting the iPod by holding down the lock and home button together and then slide the power button to turn it off and then wait 10 seconds and start it up again. If it is not a reset issue then it may be a hardware issue. Is your iPod damaged or have you dropped it recently? If it is a hardware problem then you may not be able to fix it. If your iPod has multitasking options like the new iOS devices, close out the app and then try again, it should reset your device to letters instead of emojis.

  • Someone please help a complete beginner with Enterprise Manager!

    Question moved from
    Someone please help a complete beginner with Enterprise Manager!
    Please be gentle with me, I'm absolutely new to all this. We don't have a proper DBA and I've been tasked with the role. There is no-one else in the company with oracle experience and we don't have any support. Until now I've just used enterprise manager to manage the database, but now I have a problem..
    We are using Windows Server 2003 and Oracle 10g. I (stupidly) installed some network monitoring software on our server (PRTG network monitor). I almost immediately uninstalled it and all components/registry settings, but it seems to have thrown something out regards the OEM web interface.
    We used to access the OEM GUI through http://<hostname>:5500/em, but after installing/uninstalling the network monitor software the OEM webpage would only stay up for a few minutes, before saying 'Internet Explorer cannot display the webpage'. Restarting the DBconsole in services fixed the problem, but again, only for a few minutes.
    Spent all day yesterday looking at logfiles (they didn't make much sense to me), but seemed to be saying access was denied to the server ('actively denied it'). Lots of googling led me to believe I needed to reconfigure OEM by dropping and recreating it using:
    emctl stop dbconsole
    emca -deconfig dbcontrol db
    emca -repos recreate
    during this process I was asked for various passwords and a port number? I didn't even know what to use as the port number but guessed it was 5500 ?!? (probably wrong). As it didn't work I used the default port number that I found somewhere on the web.
    However now I am even deeper in the **** as this didn't work either, (some error about listnener?) and I have now lost the DBConsole in windows services. Obviously the OEM web console doesn't work at all now
    I would be eternally grateful for some patient, beginners help here..I can post whatever log files are necessary - I just need to know what I'm supposed to be doing and where to start..
    We used to log on to the OEM as 'SYSTEM', but nowhere in the process does it seem to ask me for the password for that (its asked me for SYS and SYSMAN)
    It could be that I'm going about this completely wrong, but with only a days experience in all this its pretty hard to know what I'm doing really!
    As you can tell I'm in way over my head..I just need OEM web interface to work!
    Thanks in advance

    ok, thanks to helpful comments from other people in my initial thread (posted in general database forum), after rebuilding the console/repository I now have EM up and running. But there are more problems..
    Firstly I have an error at the very top of the screen:
    java.lang.Exception: Number of responses does not match queries
    Also, the 'Host CPU' and 'Active Sessions' are blank and say 'No Data Is Currently Available' beneath them
    my emagent.trc file contains this error, repeating with different thread IDs every 30 seconds...
    (error = 10061)
    2012-04-30 17:19:28 Thread-4376 ERROR pingManager: nmepm_pingReposURL: Cannot connect to http://hostname:5500/em/upload/: retStatus=-1
    2012-04-30 17:19:59 Thread-1448 WARN http: snmehl_connect: connect failed to (hostname:5500): No connection could be made because the target machine actively refused it.
    Help!

  • HT5312 I forget answer to my qustion with rescue email adrees please help me and send the answer to my main mail. Thank you very much

    I forget answer to my qustion with rescue email adrees please help me and send the answer to my main mail. Thank you very much

    We are fellow users here on these forums, you're not talking to iTunes Support.
    If you don't have access to your rescue email account, or you don't have one on your iTunes account, then you will need to contact iTunes Support / Apple to get the questions reset.
    Contacting Apple about account security : http://support.apple.com/kb/HT5699
    When they've been reset you can then use the steps half-way down this page to add/change a rescue email address for potential future use : http://support.apple.com/kb/HT5312

  • Help: new MSI 970a-g46 not booting.

    hello.
    i searched this forum before posting but couldn't find a solution that worked, so i thought i'd post my issue and see if y'all could help. basically, after installing the mobo and all the parts, powering on the machine does nothing but spin the fans and illuminate phase 1 CPU light for a split second. then nothing. no beeps, no further activity.
    i just purchased brand new:
    MSI 970A-G46
    AMD FX 8-Core
    Ballistix 4GB DDR3 PC3-12800 (1 stick)
    Diablotek EVO ATX midtower.
    and i'm using these my old parts:
    Themaltake Purepower 500 ATX 12V 2.0
    Gigabyte G Force 8 Series (GV-NX86S256H) graphics card
    an IDE PCI card (where my 160gb maxtor with the OS connects)
    two SATA drives seagate 500GB and a WD 2TB
    up untill i shut down my old system to build this one, everything was working fine.
    after reading the forum, i've tried moving my RAM from slot 2 to each other slot. trying to boot each time had same result.
    i tried to reseat the CPU chip, but went no further than taking the fan off and making sure the CPU pins were not visible. then pushed down on the fan with some force while i put it back. trying to boot had the same result.
    i've tried to clear the CMOS, but honestly not sure if i did it right. moved the jumper over, then waited a bit and moved it back. tried booting after that, same result.
    i'm hoping someone has a quick fix that might keep me from pulling the mobo back out and starting again.
    (side question: if i do have to start again, do i need more heatsync themal goo or will the stuff already on the CPU still work since it's never turned on?)
    thanks in advance for any help. if i can provide more info on my setup, please let me know.
    this is my first build all on  my own and it's having predictable results.

    i searched and found i made a real rookie mistake. :(
    Quote
    2. Did you plug in the 4/8-pin CPU power connector located near the CPU socket? If the motherboard has 8 pins and your PSU only has 4 pins, you can use the 4-pin connector. The 4-pin connector USUALLY goes on the 4 pins located closest to the CPU. If the motherboard has an 8-pin connector with a cover over 4 pins, you can remove the cover and use an 8-pin plug if your power supply has one. This power connector provides power to the CPU. Your system has no chance of posting without this connector plugged in! Check your motherboard owners manual for more information about the CPU power connector. The CPU power connector is usually referred to as the "12v ATX" connector in the owners manual. This is easily the most common new-builder mistake.
    from http://www.tomshardware.com/forum/261145-31-perform-steps-posting-post-boot-video-problems
    wow. plugged in the 4 pin cpu power and it booted into bios. so thanks for the help and for listening.
    signed,
    an embarrassed n00b.

  • Please Help! MSI 780Ti Gaming is not OC out the box as Advertised

    Hi Guys
     my new MSI 780T'i's arrived yesterday and the performance is great, only the core clock is 980MHz as apposed to the advertised 1020MHz
    I did not receive a Gaming Branded  disk either. However acording to the HARDOCP review: "If you do not install the software, then the card will default to "OC Mode" (with the frequencies described above.) In "Gaming Mode," the core clock drops to 980MHz with the boost clock at 1046MHz and in "Silent Mode," the core clock drops to 876MHz and the boost clock to 928MHz (the same as the reference card.) "
    Out the box without the MSI drivers and latest Nvidia Drivers my card seems to be set in Gaming Mode???
    Any help would be great

    Quote from: J4K5 on 07-March-14, 18:08:16
    my new MSI 780T'i's arrived yesterday and the performance is great, only the core clock is 980MHz as apposed to the advertised 1020MHz
    All the "Gaming" cards default to Gaming Mode.
    In your case:
    http://www.msi.com/product/vga/GTX_780Ti_GAMING_3G.html
    1020MHz Core (Boost Clock:1085MHz) (OC Mode)
    980MHz Core (Boost Clock:1046MHz) (Gaming Mode)
    876MHz Core (Boost Clock:928MHz) (Silent Mode)

  • Please help new mac user is getting super frusturated with mail

    I am trying to send a peice of mail to one of my friends but when i click send it says:The SMTP server “smtp.mac.com” rejected the password for user “PierceP”
    Please re-enter your password, or cancel. But i type in my password and nothing changes. I even went into my preferences and changed the password but it still will not allow me to send mail. PLease help
    Pierce

    Hi again. It seems like there is information people are looking for to help you that they don't have. It occurs to me that you have a new Mac and you perhaps have an Apple Store with a Genius Bar in your area. A great experience for you might be to visit one and let them setup your mail for you (for free) and debug, if there is a problem of any sort. You can make an advanced reservation at Apple Stores at http://www.apple.com/buy/. Select the nearest store and make reservation. If you haven't been in an Apple Store, you're in for a treat.

  • PLEASE HELP! Installation errors with creative suite 5.5 design premium?

    I recently tried to install creative suite 5.5 design premium on to my home computer with windows vista home premium and it was all going fine then right at the end of the installation this message popped up please help??
    Exit Code: 7
    -------------------------------------- Summary --------------------------------------
    - 1 fatal error(s), 14 error(s), 4 warning(s)
    WARNING: DW024: The payload: Adobe Photoshop CS5.1 Core  {08EF22BC-43B2-4B4E-BA12-52B18F418F38} requires a UI parent with following specification:
                    Family: Photoshop
                    ProductName: Adobe Photoshop CS5.1 Core_x64
                    This parent relationship is not satisfied, because this payload is not present in this session.
    ERROR: DW025: The payload with AdobeCode:  {857CC5F0-040E-1016-A173-D55ADD80C260} has required dependency on:
                    Family: InDesign
                    ProductName: Adobe InDesign CS5.5 Icon Handler x64
                    MinVersion: 0.0.0.0
                    This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                    Removing this dependency from list. Product may function improperly.
    WARNING: DW025: The payload with AdobeCode:  {857CC5F0-040E-1016-A173-D55ADD80C260} has recommended dependency on:
                    Family: Adobe Web Suite CS5.5
                    ProductName: Adobe Media Encoder CS5.5 X64
                    MinVersion: 0.0.0.0
                    This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                    Removing this payload from the dependency list.
    WARNING: DW025: The payload with AdobeCode:  {D8CCCF4C-C227-427C-B4BE-736657D2AB7E} has recommended dependency on:
                    Family: Adobe Web Suite CS5.5
                    ProductName: Adobe Media Encoder CS5.5 X64
                    MinVersion: 0.0.0.0
                    This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                    Removing this payload from the dependency list.
    ERROR: DW025: The payload with AdobeCode:  {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
                    Family: CoreTech
                    ProductName: Adobe Player for Embedding x64 3.1
                    MinVersion: 0.0.0.0
                    This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                    Removing this dependency from list. Product may function improperly.
    ERROR: DW025: The payload with AdobeCode:  {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
                    Family: Shared Technology
                    ProductName: Photoshop Camera Raw (64 bit)
                    MinVersion: 0.0.0.0
                    This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                    Removing this dependency from list. Product may function improperly.
    ERROR: DW025: The payload with AdobeCode:  {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
                    Family: CoreTech
                    ProductName: AdobeCMaps x64 CS5
                    MinVersion: 0.0.0.0
                    This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                    Removing this dependency from list. Product may function improperly.
    ERROR: DW025: The payload with AdobeCode:  {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
                    Family: CoreTech
                    ProductName: Adobe Linguistics CS5 x64
                    MinVersion: 0.0.0.0
                    This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                    Removing this dependency from list. Product may function improperly.
    ERROR: DW025: The payload with AdobeCode:  {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
                    Family: CoreTech
                    ProductName: AdobePDFL x64 CS5
                    MinVersion: 0.0.0.0
                    This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                    Removing this dependency from list. Product may function improperly.
    ERROR: DW025: The payload with AdobeCode:  {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
                    Family: CoreTech
                    ProductName: AdobeTypeSupport x64 CS5
                    MinVersion: 0.0.0.0
                    This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                    Removing this dependency from list. Product may function improperly.
    ERROR: DW025: The payload with AdobeCode:  {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
                    Family: CoreTech
                    ProductName: Adobe WinSoft Linguistics Plugin CS5 x64
                    MinVersion: 0.0.0.0
                    This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                    Removing this dependency from list. Product may function improperly.
    WARNING: DW025: The payload with AdobeCode:  {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has recommended dependency on:
                    Family: Adobe Web Suite CS5.5
                    ProductName: Adobe Media Encoder CS5.5 X64
                    MinVersion: 0.0.0.0
                    This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                    Removing this payload from the dependency list.
    ERROR: DW020: Found payload conflicts and errors:
    ERROR: DW020:  - Adobe Dreamweaver CS5.5 depends on Adobe CSXS Extensions CS5.5 to be installed.
    ERROR: DW020:  - Adobe Photoshop CS5.1 Core depends on Adobe CSXS Extensions CS5.5 to be installed.
    ERROR: DW020:  - Adobe Illustrator CS5.1 depends on Adobe CSXS Extensions CS5.5 to be installed.
    ERROR: DW020:  - Adobe InDesign CS5.5 Application Base Files depends on Adobe CSXS Extensions CS5.5 to be installed.
    ERROR: DW020:  - Adobe Flash CS5.5 depends on Adobe CSXS Extensions CS5.5 to be installed.
    FATAL: DW020: Conflicts were found in the selected payloads. Halting installation.

    i tried all the thinks listed and uninstalled then reinstalled creative suite 5.5 design premium and yet again this showed up at the end please help it mean nothing to me help!
    Exit Code: 6
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 17 error(s), 8 warning(s)
    WARNING: DW024: The payload: Adobe Photoshop CS5.1 Core  {08EF22BC-43B2-4B4E-BA12-52B18F418F38} requires a UI parent with following specification:
    Family: Photoshop
    ProductName: Adobe Photoshop CS5.1 Core_x64
    This parent relationship is not satisfied, because this payload is not present in this session.
    ERROR: DW025: The payload with AdobeCode:  {857CC5F0-040E-1016-A173-D55ADD80C260} has required dependency on:
    Family: InDesign
    ProductName: Adobe InDesign CS5.5 Icon Handler x64
    MinVersion: 0.0.0.0
    This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
    Removing this dependency from list. Product may function improperly.
    WARNING: DW025: The payload with AdobeCode:  {857CC5F0-040E-1016-A173-D55ADD80C260} has recommended dependency on:
    Family: Adobe Web Suite CS5.5
    ProductName: Adobe Media Encoder CS5.5 X64
    MinVersion: 0.0.0.0
    This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
    Removing this payload from the dependency list.
    WARNING: DW025: The payload with AdobeCode:  {D8CCCF4C-C227-427C-B4BE-736657D2AB7E} has recommended dependency on:
    Family: Adobe Web Suite CS5.5
    ProductName: Adobe Media Encoder CS5.5 X64
    MinVersion: 0.0.0.0
    This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
    Removing this payload from the dependency list.
    ERROR: DW025: The payload with AdobeCode:  {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
    Family: CoreTech
    ProductName: Adobe Player for Embedding x64 3.1
    MinVersion: 0.0.0.0
    This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
    Removing this dependency from list. Product may function improperly.
    ERROR: DW025: The payload with AdobeCode:  {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
    Family: Shared Technology
    ProductName: Photoshop Camera Raw (64 bit)
    MinVersion: 0.0.0.0
    This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
    Removing this dependency from list. Product may function improperly.
    ERROR: DW025: The payload with AdobeCode:  {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
    Family: CoreTech
    ProductName: AdobeCMaps x64 CS5
    MinVersion: 0.0.0.0
    This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
    Removing this dependency from list. Product may function improperly.
    ERROR: DW025: The payload with AdobeCode:  {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
    Family: CoreTech
    ProductName: Adobe Linguistics CS5 x64
    MinVersion: 0.0.0.0
    This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
    Removing this dependency from list. Product may function improperly.
    ERROR: DW025: The payload with AdobeCode:  {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
    Family: CoreTech
    ProductName: AdobePDFL x64 CS5
    MinVersion: 0.0.0.0
    This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
    Removing this dependency from list. Product may function improperly.
    ERROR: DW025: The payload with AdobeCode:  {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
    Family: CoreTech
    ProductName: AdobeTypeSupport x64 CS5
    MinVersion: 0.0.0.0
    This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
    Removing this dependency from list. Product may function improperly.
    ERROR: DW025: The payload with AdobeCode:  {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
    Family: CoreTech
    ProductName: Adobe WinSoft Linguistics Plugin CS5 x64
    MinVersion: 0.0.0.0
    This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
    Removing this dependency from list. Product may function improperly.
    WARNING: DW025: The payload with AdobeCode:  {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has recommended dependency on:
    Family: Adobe Web Suite CS5.5
    ProductName: Adobe Media Encoder CS5.5 X64
    MinVersion: 0.0.0.0
    This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
    Removing this payload from the dependency list.
    ----------- Payload: {CFA46C39-C539-4BE9-9364-495003C714AD} Adobe SwitchBoard 2.0 2.0.0.0 -----------
    WARNING: DF029: ARKServiceControl::StartService: Service not started/stopped SwitchBoard. Current State: 0 Exit Code: 0 Service Specific Exit Code: 0(Seq 1)
    ----------- Payload: {2EE4F060-CEE6-4002-AA8B-91B791541767} Pixel Bender Toolkit 2.6.0.0 -----------
    WARNING: DF035: CreateAlias:Icon file does not exist at C:\Program Files\Adobe\Adobe Utilities - CS5.5\Pixel Bender Toolkit 2.6\windows\pb_app.icofile:\\\C:\PIXELB~1\source\winwood\Staging    0X1.9E3C8AP-1022rea\windows\pb_app.ico42178f80493091e8e552c84a2897e9da68fce32_32_f8049309 1e8e552c84a2897e9da68fce for icon C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Adobe Design Premium CS5.5\Adobe Pixel Bender Toolkit 2.6.lnk with target C:\Program Files\Adobe\Adobe Utilities - CS5.5\Pixel Bender Toolkit 2.6\Pixel Bender Toolkit.exe(Seq 89)
    ----------- Payload: {BD85DFD4-005F-4219-8E27-C922CC4D8A61} Adobe CSXS Extensions CS5.5 2.5.0.0 -----------
    ERROR: DF024: Unable to preserve original file at "C:\Program Files\Common Files\Adobe\CS5.5ServiceManager\lib\CSXS-Installer-Hook.dll" Error 32 The process cannot access the file because it is being used by another process.(Seq 130)
    ERROR: DW063: Command ARKDeleteFileCommand failed.(Seq 130)
    ----------- Payload: {4C08199E-0D93-4227-8325-F024E71CA7A1} Adobe SING CS5 3.0.0.0 -----------
    ERROR: DF024: Unable to preserve original file at "C:\Program Files\Common Files\Adobe\SING\Mark II\SING.dll" Error 32 The process cannot access the file because it is being used by another process.(Seq 2)
    ERROR: DW063: Command ARKDeleteFileCommand failed.(Seq 2)
    ----------- Payload: {8DADF070-FE60-4899-8EF0-4242E7702F7D} Adobe Fireworks CS5.1 11.1.0.0 -----------
    WARNING: DF012: File/Folder does not exist at C:\Users\Isabel\Desktop\Creative Suite 5.5 Design Premium\adobe 5.5 code\Creative Suite 5.5 Design Premium\Adobe CS5_5\payloads\AdobeFireworks11.1.0All\OEM(Seq 1215)
    ----------- Payload: {5BDE0A1B-35BF-4224-A54F-73786EECDFC1} Adobe Fireworks CS5.1_AdobeFireworks11.1.0en_GBLanguagePack 11.1.0.0 -----------
    WARNING: DF012: File/Folder does not exist at C:\Users\Isabel\Desktop\Creative Suite 5.5 Design Premium\adobe 5.5 code\Creative Suite 5.5 Design Premium\Adobe CS5_5\payloads\AdobeFireworks11.1.0en_GBLanguagePack\OEM(Seq 74)
    ----------- Payload: {7202D4A7-F7E6-4e7a-B77D-7B1C4E8B5CA6} Adobe Flash Player 10 ActiveX 10.0.0.0 -----------
    ERROR: Error 1722.There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action NewCustomAction1, location: C:\Users\Terry\AppData\Local\Temp\InstallAX.exe, command: -install activex -msi
    ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
    MSI Error message: Error 1722.There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action NewCustomAction1, location: C:\Users\Terry\AppData\Local\Temp\InstallAX.exe, command: -install activex -msi
    ERROR: DW050: The following payload errors were found during install:
    ERROR: DW050:  - Adobe SING CS5: Install failed
    ERROR: DW050:  - Adobe CSXS Extensions CS5.5: Install failed

  • HELP PLEASE HELP! urgent question with an easy answer!!!!

    Hello;
    I designed a JFrame game, that uses gif files as ImageIcons. The game works perfectly when I run it from console with the java.exe command.
    However; now I want to create a wraparound and run the JFrame in the Internet Explorer from an applet. So I created a new file that extends JApplet; this new file creates a new object of the JFrame-game's class and show()'s it.
    And I created an HTM file that runs the JApplet class. However, the internet explorer cannot open the applet because it has trouble loading the pictures (gif files). How can I load the pictures from my applet for my frame???
    I dont want to change the Java security file. I just want to make the images accessible by my applet. I cannot use commands like setImage in my applet because my JFrame sets the Images.
    (I repeat)My JApplet only invokes an object of my JFrame class and shows it.
    PLEASE HELP PLEASE PLEASE..
    Thanks..

    OK; let me tell you the whole thing. My pictures are in the same folder for sure.
    My JFrame reads pictures and assigns JButtons pictures. when I run the frame there are 16 buttons with the same picture, and when I click the buttons there is a listener in the JFrame that changes the pictures. Simply put, the JFrame has no trouble finding and loading the pictures.
    Then I created a JApplet as follows:
    import java.awt.*;
    import java.awt.event.*;
    import javax.swing.*;
    public class MemoryApplet extends JApplet
    public void init ()
         GameFrame ce = new GameFrame ();
         ce.show ();
    GameFrame is the name of the JFrame class. Then when I try to open the applet using IE, it gives the following error:
    Exception: java.security.AccessControlException: (javax.io.FilePermission back.gif read)
    back.gif is one of the gif files that are used in GameFrame

  • Please help this clueless beginner with out.print syntax....

    Please help a clueless beginner out!!!! :-)
    I'm trying to build a dynamic table that functions as a calendar...(see http://www.oreilly.com/catalog/javacook/chapter/ch18.html for the basic idea and code structure).
    Here's the problem...I want to make each date inside of the table a hyperlink to a new page. I figured out how to create the hyperlinks, but I CAN'T figure out how to create hyperlinks that pass variables to a new page.
    Here's the code that works:
    // Fill in numbers for the day of month.
    for (int i = 1; i <= daysInMonth; i++)
    out.print("<td>");
    out.print("<a href=newpage.jsp>");
    out.print(i);
    out.print("</a>");
    out.print("</td>");
    Here's the code that DOESN'T work....but can serve as pseudo-code for what I want to do:
    // Fill in numbers for the day of month.
    for (int i = 1; i <= daysInMonth; i++)
    out.print("<td>");
    out.print("<a href=newpage.jsp?year=<%= yy %>&month=<%= months[mm] %>&date=<%= i %>>");
    out.print(i);
    out.print("</a>");
    out.print("</td>");
    <%= yy %>, <%= months[mm] %> are defined elsewhere in the code, and I want to use the current value of "i" from the loop.
    So, if everything works like I want, the table will get created, and if yy=2002 and mm=January, then the hyperlinks will look like:
    for day 1:
    "/newpage.jsp?year=2002&month=January&date=1"
    for day 2:
    "/newpage.jsp?year=2002&month=January&date=2"
    ...for day 31:
    "/newpage.jsp?year=2002&month=January&date=31"
    Can someone please point me in the right direction? Is it even possible to do what I want? (I assume it is...but maybe I can't use out.print???)
    Thanks!

    Hi. The expression "<%=some_Java_expression %>" is the JSP tag, that returns string value to HTML code. You should use it in HTML block like:
    <%String myname="Ivan"; %>
    <body>
    <p>My name is: <%=myname %></p>
    But You tried to use it inside the string expression and it generated some code like this:
    <a href="newpage.jsp?year=<%=yy%">...
    , didn't it?
    It invokes method out.print(" ... "), that prints this string value (but in the HTML block). So You tried to print something inside the print method. You should rewrite Your code like this:
    for (int i = 1; i <= daysInMonth; i++)
    out.print("<td>");
    out.print("<a href=newpage.jsp?year="+yy+"&month="+months[mm]+"&date="+i+">");
    out.print(i);
    out.print("</a>");
    out.print("</td>");
    I used the + operator to join Your code for link tag with the values (yy, months[mm], i.
    I hope it helps You,
    bye.</a>

  • Please Help!  Two problems with my iMac at once a week b/4 finals!!!!

    First I'd just like to mention that I have no idea which OS X I have so...yeah, sorry. I was depending on this computer to work for my class finals. Anyway, on with the problems.
    My school is getting all new computers next year, so they are selling all of their iMacs for ten dollars each. Like an idiot, I bought one. And...so did my brother. But anyway, I got it home and started it up and all that came up was the traditional BIIINNNNGGGG, a white screen(for a second), then a gray one. This little icon comes up in the middle that you can't click on(the cursor doesn't come up)but it's purple and has a little cartoon face on it. This icon only comes up if you are not pressing any keys or click/moving the mouse.
    So I went back to school the next day and asked what was up, and they said that they completely wiped the computer and that I would have to buy new OS X install software. Okay...so I went to my computer teacher and he had a few sets of OS X install software.
    I brought it home and turned on my computer. I put in the disk that said OS X Install and it went in. The computer whirred for a bit, then spit the disk back out. So I decided to try a different disk because I thought that maybe the computer already had the contents of that disk on it. I put in the Applications disk, and now it refuses to come out. I have tried plugging the keyboard into different ports(there are two, with two others on the keyboard itself for the mouse) and everything. I looked inside through the little slot(discs go right into the computer-no hard drive or disk tray that slides out) on the front and the disc is spinning but nothing is happening.
    Please help me with both my wiped computer problem and my stuck disc problem. I have tried to give as much detail to help anyone who can help me. Please, WHAT CAN I DO?!
    iMac   Mac OS X (10.0.x)   I have an OS X. No idea which one...
    iMac   Mac OS X (10.0.x)   I have an OS X. No idea which one...
    iMac   Mac OS X (10.0.x)   I have an OS X. No idea which one...

    The full retail install disks are available here and at any Apple Store and many computer retailers. Also, check the system requirements. Be sure your Mac has firewire and enough ram to run Tiger. At this point you might be able to find the disks at a slightly discounted price because of the coming release of 10.5 Leopard. But be sure it is the black disk, boxed version if possible.
    EDIT: And the install disc for Tiger is a DVD, so be sure your iMac has DVD.
    This may help to narrow down the model iMac you have.
    -mj
    [email protected]
    Message was edited by: macjack

  • Please help...Problem with 3D Applet using JRE 1.5

    Hi all,
    I have an applet which uses sun opengl 1.3.1 plugin to render some 3D graphics. It is working fine with JRE 1.4.2_06, but not showing the 3D graphics with the latest JRE 1.5 release. I tried to repaint using available API with no success.
    Please help asap,
    Thanks in advance
    prasad

    I wonder if you have the same problem as me... Maybe we can find a solution for us both, no need for me to open a new thread for this topic then...
    I wrote an applet using Swing and compiled it using JavaSDK 1.4.x. I also installed the 1.4.x JRE for both of my test browsers. In Mozilla 1.1 the applet displays properly all the time. In IE6 SP1 it sometimes works as intended but sometimes the applet simply stops working, as per my Java Console somewhere after invoking the "start" method. Parts of the applet simply become gray and when I resize it - I have a JFrame in my applet - the whole JFrame becomes gray and does not respond to input nor it redraws itself. Shutting down IE does not close the JFrame(although the java console reports normal program termination and cleanup) and the only way to close it is through the task manager. I am using Windows 98SE btw.
    Does it sound similiar to your problem? It happens ONLY with IE, not with Mozilla. Anybody has an idea on what it could be? I doubt there's an error in my code...

  • PLEASE HELP i have trouble with WRT54G port forwarding with linksys

    Hello guys, i play a game called populous, and since im on a router i cannot host the game, when i used to have a d-link all i would do is have to set up the port to my ip with the udp. but ever since i have swiched to linksys that doesnt work, the ip on my portforwaring is the same as the one on my computer the port is correct and the udp is set, i also have no fire walls on and it still doesnt make a differance, Someone in the game suggested that there is a local ip i need to get? is that true or is there another setting i need to set up in my router page?
    PLEASE HELP IF YOU CAN <3<3 thanks
    Message Edited by Curtman on 09-07-2007 12:04 PM

    Yes that happens if you write replies to your own posts. Many regulars here only answer their "own" topics (i.e. to which they have answered before) and new ones which don't have replies, yet. If you write a reply to your own topic chances are your are not read unless during some random browsing...
    Regarding your problem it is impossible to say anything unless you give the exact settings you have on your router. Please post the full settings you have for port forwardings, port triggering and DMZ. If you have UPnP forwarding in your router (I don't think you have) post those settings, too.
    Otherwise I suggest this checklist for troubleshooting port forwardings.

  • Please help - New to Mac - File managment.. moving files, folders, deleting

    Hello, I am hoping someone can help me...
    I have just got one of the 24" iMacs at work and I have never worked on Mac before. I am having problems with documents/files.
    I have made new folders in my "documents" folder but I cannot move/drag files into the folders. I also cant delete files from the documents folder.
    I have spent the last 4 hours reading tutorials etc and still can't figure this out. I am guessing it's probably simple... but I just can't seem to find the answer.
    PLEASE HELP!!!!!!

    There are two documents folders. One shared among all user and a personal documents folder.
    To get to the system folder you double click on the machintosh hd. You will see the system documents folder here. If you are not logged on with system administrator privileges, the files will be read only. To tell if you have administrator privileges, do:
    apple icon > system preferences > accounts
    click on your account and see if the allow user to administer this computer box is checked.
    One way get your person documents folder, you double click on the machintosh hd. Next, click on the little house icon on the lower left side of the screen. This will get to all your personal files and folders. One of the folders is your documents folder.
    I agree with the prior poster to find someone who has worked with the mac before to give you a quick tutorial.
    I suggest you visit the local library or book store and checkout or buy a book on using Mac OS Tiger.
    Robert

Maybe you are looking for