Please help!! Newbie here really need help. Numlock, divers, backup, recovery disk

Hi everyone
I finally found where to post
I really wish someone could or would help me
I have a lenovo g550 for about 4-5 years And I was happy with it
few days go I cleaned installed windows Ii got a friend to help infests he put it on the d drive then c drive And c drive gainsaid he formatted my d drive chlorinating on therein was a real unswayable I kind of sorted it out. And I learnt a lot bout the oem partitioning deleted that though. Can someone tell me If I can boot or recover my previous vista from there.?
If not its fine but then I would like to know is can I change the oem partition with the image or recovery (whatever you call it) of the new windows 7 or how to go about creating a recovery disk.
After installing the new windows my PC seems to be fine but I don't know If I kept all the drivers And whatever goes with it. What are all the drivers I need And where do I find If I have them or not. I am not really worried about my data as I want to start fresh.
Another thing I noticed is my number keypad stopped working all of a sudden. When I press the numlock button it beeps and the light does go on and off. When its on it doesn't give me numbers e.g... If I press 5 it actually highlights where the cursor is.
And my mouse/trackpad is not the same as it was before. When I had vista on the right of the trackpad I could use it to scroll up and down and the bottom of the trackpad allowed me to scroll left to right. This function is no longer there. I have to use the arrows to go up and down.
Somebody please help as I do need my laptop for work purposes.
THANK YOU IN ADVANCE!!!

hi any drivers you should need you should be able to get through support drivers&downloads link at top of this sites page bud you could use partition magic to clear all partitions and create new multible one if you wish the rest wait till after you put drivers in and see if probs still exist bud

Similar Messages

Newbie here i need help

i just got the droid 2 and im all new to the phone and features i had a blackberry for two years and i was use to that but so far i like the droid i some what know how to do certain things. Now the only problem idk how to do is connect the droid to my mac pro notebook and transfer my music from itunes. i keep getting some code error and it wont download them. idk if im doing it wrong or what im suppose to do?
if anyone could help me i appreciate it i really need music on my phone thats what keeps me entertained on my way to work everyday lol

Hello,
You could use the program Doubletwist on your mac to sync your itunes and download your music and other things to your Android phone. Hope that this helps you out.
--Reginald Prior

OMG CAN SOMEONE PLEASE ANSWER THIS I REALLY NEED HELP!! MY ITUNES WONT OPEN

i had to download itunes again because i restarted my computer and deleted itunes from it and i downloaded the new itunes and everything was goin good and it got intalled and the quicktime and itunes icons appeared on my desktop...but when i clicked on the icon 2 open itunes the iTunes Software License agreement poped up quikly and disappeared and everytime i click on itunes it pops up and then goes away and im not able to click the agree button....i have restarted my computer completly so dat it can start fresh and then i download itune but the same thing keeps happenin....omg please help me...this problem has me frustrated i dont know wat to do anymore

Any help here?
http://docs.info.apple.com/article.html?artnum=302386

Newbie here I NEED HELP!!!!!!! 750 (former sprint

HI all I am a newbie I have been trying to figure out how to get pictures off my treo without having Sprint service. I bought a data cord and downloaded sync4.5. For some reason I am not able to get synced up with my computer which is running XP home edition.
I don't have the original disk that came with the phone, do I need that disk? if so I am screwed.
Thanks in advance for any help.
I am located in Elk Grove Ca. if anyone is near that can help.

hmdznrcld wrote:
I bought a data cord and downloaded sync4.5. For some reason I am not able to get synced up with my computer which is running XP home edition.
Does Windows recognize the 750 (i.e., does plug-and-play detect the device)? Does ActiveSync start up, even if sync does not work? In that case, you could try using the Explore button of ActiveSync to copy files from your Treo to your computer. Sometimes you can drag and drop, other times Ctrl+c and then Ctrl+v in the new location works better.
(I've only used a Windows Mobile 6.1 device, but hopefully the 750 supported the Explore feature...)

Please help me :'( , I really need help in Linked List & Recursion program.

Hi everybody..
I hope all of you are ok..
I'm new member in this forum and I hope anyone can help me in Linked List $ Recursion issue..
I should write a Java program that implements a linked list of objects. This program / class will have the following methods:
1- //print each node starting from startNode upto the end node in the list
void writeList(Node startNode)
2- //insert a new element to the end of the list
void insertEnd(Object element)
3- //Print each element statring from first element in list to the last element then start //printing each element from the last element to the first element
void writeMirror()
4- //delete the last node.
void deleteEnd()
5- //returns the number of the nodes in the list.
int lengthList(ListNode x)
Implement the above methods using the following restrictions:
1- All above methods must be implemented as a recursive method.
2- For the given linked list class, there is only a head reference
variable, pointing the beginning of the list. Thus there is no last or
end reference variable.
I don't know how to write this program :'( ..
I need your help guys and I will be so happy if anyone can do it for me ..
The sad girl
MaRia :(

Any body can give me any idea any hint that may help
me ??Hint that will help you: get a personal tutor. This is the wrong place to learn how to program. And you definitely won't learn by having your homework done for you.
Oh, and I don't care at all that your hamster has diarrhea, your boyfriend broke up with you, both of your parents are dead and unemployed, that you have to look after your 231 siblings all by yourself and that you're forced to take this class and rather want to do something completely different.
Heard it all before.

Help - Newbie Mac user needs help removing malware in Safari

I've tried researching this but I haven't found exact steps on how to get rid of different website popping up in my Safari browser. I'm a little gun shy with deleting files, etc on the Mac so I hope you can help me fix this. Or better yet, is there software that will fix it?
Thanks in advance for your help.
Wendy

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/d;/(etc|Preferences)\//s/^\.\/[^/]+//p;' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' BEGIN{FS="= "} /Name/{print $2} ' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / /{$0="'"${p[28]}"'"};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' 's/0/Off/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,[lps]*.conf,pam.d,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}* .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D23 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;D12 26 48 59 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with "Model Identifier." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

HELP ME I REALLY NEED HELP QUICK!!!

well i plug in my ipod and it says restore it so i restored it on my ipod but it keeps saying that so i went into ipod updater were youre ment to restore it and it says invalid ipod service version please help

j -
1) Install iTunes 7.0 (if you haven't already)
2) Connect your iPod
3) Click on your iPod in the iTunes source list (on the left) when it appears
4) On the right you should see the iPod settings : like this
http://www.apple.com/itunes/sync/summary.html
5) In the middle there is a "Version" area, click the "Update" button

Help Newbie to flash needs help

i made a flash logo and after i exported it it wont play
outside of cs flash so what do i have to put into the logo to make
it auto play

Ummm, it's hard to make sense of what you're trying to say,
which is maybe why nobody has responded. what are you doing to make
it play? Are you putting it into an html page?

Please help! I am trying to change my Apple Id that used to be my mother to Mine- Every time i have it changed and i go and try and do an update it continues to ask for her old password. I really need help with this!

Please help! I am trying to change my Apple Id that used to be my mother to Mine- Every time i have it changed and i go and try and do an update it continues to ask for her old password. I really need help with this!

Phil0124 wrote:
Apps downloaded with an Apple ID are forever tied to that Apple ID and will always require it to update.
The only way around this is to delete the apps that require the other Apple ID and download them again with yours.
Or simply log out of iTunes & App stores then log in with updated AppleID.

Hello. My mac can't connect to my time capsule. There is no response and I can't put it back to the originals definitions because all my files are there and I can´t loose them. (sorry about my bad english, but I really need help!)

Hello. My mac can't connect to my time capsule. There is no response and I can't put it back to the originals definitions because all my files are there and I can´t loose them. (sorry about my bad english, but I really need help!)

Your files are unaffected by a reset.. no reset via the reset button on the TC harms, deletes or does anything to your files.
The Factory Reset universal
Unplug your TC/AE. Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. The time is not important.. it is the front LED rapid flashing that indicates you are in factory mode.
Release reset.
If it doesn’t flash rapidly you have released reset at some point and try again.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
Here is how to do a fully manual setup for TC which is sometimes necessary with Mavericks in particular.
Airport Utility shows "unexpected error - please try again" when connecting to Time Capsule

Hi I really need help with re-activating my little sisters iPad

Hi
I really need help with re-activating my little sisters iPad, i already set it up a couple of months ago when i bought it,but unfortunately she disabled it by forgetting her password. i followed the necessary steps to reset it again, when the iPad came back on and we put the apple id and password it kept refusing it, i even reset the password, which sent the verification the email account, i followed the steps to reset, But then i noticed the message at the top of the activate screen with the message “this iPad is currently linked to the following apple ID _______ with a a few hidden dashes, but at the end of the email it says co.uk, but the problem is the email ends with .com. I have no idea how this happened, and its driving me insane and my little sister only used her iPad for a month before this happened. for some reason the the iPad email address ends in co.uk when the actual email ends with .com
I also set up the software find my ipad
Please help

You will probably have to contact Apple to see if they can help.
Contact Us

[Locked] Really need help trying to log users

I really need help trying to show when members have logged in. This is my second post and and the code that I was given, didn't work and now I can't get anyone to tell me what is wrong with it. Here is the code and error message:
Error message is "Unknown column 'billsmith' in 'where clause'
Here is the code I am using:
mysql_select_db($database_connRegister, $connRegister);
$logged_in_user = "-1";
if(isset($_SESSION['MM_Username'])) {
$logged_in_user=$_SESSION['MM_Username'];
$query_online_now = "UPDATE users SET logged_in='Online', last_login_date=NOW() WHERE user_name=$logged_in_user";
$online_now = mysql_query($query_online_now, $connRegister) or die(mysql_error()); }
$query_not_online_now="UPDATE users SET logged_in='Offline' WHERE last_login_date<NOW() - INTERVAL 60 MINUTE";
$not_online_now=mysql_query($query_not_online_now, $connRegister) or die(mysql_error());
Can someone please tell me why it isn't working?

This question has been answered here: http://forums.adobe.com/message/2351465#2351465.
Locking this thread to avoid duplication. Please reply in the original thread if any further help is needed.

Really need help BBM not working on wifi

ok so I've just updated my torch 9800 software and with it all of the apps, but there's the problem that my BBM wont work on wifi. why is that? I'd tried to resend the service books but there was a message about server conection problems, then I'd even tried by the BBM configuration icon in the setup menu but there was another message (imposible to configurate BBM, a temporary error was notified with the server) so I dont really know what to do... really need help this is my only comunication way with my family on the other side of the world.

On the handset, go to:
For OS5 and 4.x
Options - Advanced Options - Host Routing Table
and click Register now, and escape back to the home page.
For OS6 and higher
in options, device , advanced, host routing table, click on menu and choose register now.
Wait 2 minutes and see if registration to network happens.
Resend your service books from your carrier BIS site:
From your handheld device: http://www.blackberry.com/btsc/KB15402
Go to the Personal Email Set Up icon and log in. Then under Help!, select Service Books, then select Send service Books.
From your desktop PC: http://www.blackberry.com/btsc/KB02830
North American Carriers - scroll down to select your carrier
WorldWide Carriers - Find your carrier on the list
3. With the BlackBerry device powered ON, remove the battery a few seconds and then reinsert the battery to reboot. This reboot, even if you have already done this, is often needed to install the service books.
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

REALLY need help about two accounts, 1 Mac

I really really need help.
Back ground. I have a bought my daughter an itouch 4th gen for Christmas. I have set up a new user account on the macbook pro, Set her up a new Apple ID, but I want to share the music. So i did what was said, moved the media folder to a shared folder.
Got the music shared onto her itunes libary, although when I added to Library it transfered all my apps, which I deleted.
I did a trial run of downloading an app, and its not showing in the library? WHY??
Please can someone help me before it goes out the window.
Thanks

If you want a true streaming server, you'll need to be running software such as QuickTime Streaming Server. QTSS only comes with Mac OS X Server, but there is an open-source version called Darwin Streaming Server available for Mac OS X, Linux, and Windows 2000/2003 Server.
To get started learning how to stream your content, start with the Streaming & Delivery tutorials on this web page.
Hope this helps.

Error in deploying my spring web app, really need help?!

I am using eclipe 3.3.0 and tomcat 5.5.23, spring 2.0.6
And I get this error while deploying.
Can anyone tell me where it is comming from and what i should do to fix it?
If you need any more info please ask that too, I really need help..
I have browsed all over the internet, but found nothing really helpful..
In my browser I get a Http status 500 error:
exception
javax.servlet.ServletException: Servlet.init() for servlet jsp threw exception
     org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:117)
     org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:151)
     org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:870)
     org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:665)
     org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:528)
     org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:81)
     org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:685)
     java.lang.Thread.run(Unknown Source)
root cause
java.lang.NoClassDefFoundError: javax/servlet/jsp/JspFactory
     org.apache.jasper.servlet.JspServlet.init(JspServlet.java:100)
     org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:117)
     org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:151)
     org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:870)
     org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:665)
     org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:528)
     org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:81)
     org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:685)
     java.lang.Thread.run(Unknown Source)
And this is what I see in the console:
10-sep-2007 14:16:11 org.apache.catalina.core.AprLifecycleListener lifecycleEvent
INFO: The Apache Tomcat Native library which allows optimal performance in production environments was not found on the java.library.path: C:\Program Files\Java\jre1.5.0_12\bin;.;C:\WINDOWS\system32;C:\WINDOWS;C:\Program Files\Java\jre1.6.0_02\bin\client;C:\Program Files\Java\jre1.6.0_02\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\maven\maven-2.0.7\bin;C:\Program Files\Common Files\Adobe\AGL;C:\Program Files\QuickTime\QTSystem\;C:\Java\SDK\bin;C:\maven\maven-2.0.7\bin;C:\apache-ant-1.7.0\bin;C:\spring-framework-2.0.6
10-sep-2007 14:16:11 org.apache.coyote.http11.Http11BaseProtocol init
INFO: Initializing Coyote HTTP/1.1 on http-8090
10-sep-2007 14:16:11 org.apache.catalina.startup.Catalina load
INFO: Initialization processed in 4312 ms
10-sep-2007 14:16:12 org.apache.catalina.core.StandardService start
INFO: Starting service Catalina
10-sep-2007 14:16:12 org.apache.catalina.core.StandardEngine start
INFO: Starting Servlet Engine: Apache Tomcat/5.5.23
10-sep-2007 14:16:12 org.apache.catalina.core.StandardHost start
INFO: XML validation disabled
log4j:WARN No appenders could be found for logger (org.apache.catalina.startup.TldConfig).
log4j:WARN Please initialize the log4j system properly.
10-sep-2007 14:16:14 org.apache.commons.modeler.Registry registerComponent
SEVERE: Null component Catalina:type=JspMonitor,name=jsp,WebModule=//localhost/SpringBikeApp,J2EEApplication=none,J2EEServer=none
10-sep-2007 14:16:14 org.apache.catalina.core.ApplicationContext log
SEVERE: StandardWrapper.Throwable
java.lang.NoClassDefFoundError: javax/servlet/jsp/JspFactory
     at org.apache.jasper.servlet.JspServlet.init(JspServlet.java:100)
     at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1139)
     at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:966)
     at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:3956)
     at org.apache.catalina.core.StandardContext.start(StandardContext.java:4230)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1014)
     at org.apache.catalina.core.StandardHost.start(StandardHost.java:736)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1014)
     at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:443)
     at org.apache.catalina.core.StandardService.start(StandardService.java:448)
     at org.apache.catalina.core.StandardServer.start(StandardServer.java:700)
     at org.apache.catalina.startup.Catalina.start(Catalina.java:552)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:295)
     at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:433)
10-sep-2007 14:16:14 org.apache.catalina.core.StandardContext loadOnStartup
SEVERE: Servlet /SCWCD threw load() exception
java.lang.NoClassDefFoundError: javax/servlet/jsp/JspFactory
     at org.apache.jasper.servlet.JspServlet.init(JspServlet.java:100)
     at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1139)
     at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:966)
     at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:3956)
     at org.apache.catalina.core.StandardContext.start(StandardContext.java:4230)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1014)
     at org.apache.catalina.core.StandardHost.start(StandardHost.java:736)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1014)
     at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:443)
     at org.apache.catalina.core.StandardService.start(StandardService.java:448)
     at org.apache.catalina.core.StandardServer.start(StandardServer.java:700)
     at org.apache.catalina.startup.Catalina.start(Catalina.java:552)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:295)
     at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:433)
10-sep-2007 14:16:14 org.apache.commons.modeler.Registry registerComponent
SEVERE: Null component Catalina:type=JspMonitor,name=jsp,WebModule=//localhost/SCWCD,J2EEApplication=none,J2EEServer=none
10-sep-2007 14:16:14 org.apache.catalina.core.ApplicationContext log
SEVERE: StandardWrapper.Throwable
java.lang.NoClassDefFoundError: javax/servlet/jsp/JspFactory
     at org.apache.jasper.servlet.JspServlet.init(JspServlet.java:100)
     at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1139)
     at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:966)
     at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:3956)
     at org.apache.catalina.core.StandardContext.start(StandardContext.java:4230)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1014)
     at org.apache.catalina.core.StandardHost.start(StandardHost.java:736)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1014)
     at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:443)
     at org.apache.catalina.core.StandardService.start(StandardService.java:448)
     at org.apache.catalina.core.StandardServer.start(StandardServer.java:700)
     at org.apache.catalina.startup.Catalina.start(Catalina.java:552)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:295)
     at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:433)
10-sep-2007 14:16:14 org.apache.catalina.core.StandardContext loadOnStartup
SEVERE: Servlet threw load() exception
java.lang.NoClassDefFoundError: javax/servlet/jsp/JspFactory
     at org.apache.jasper.servlet.JspServlet.init(JspServlet.java:100)
     at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1139)
     at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:966)
     at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:3956)
     at org.apache.catalina.core.StandardContext.start(StandardContext.java:4230)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1014)
     at org.apache.catalina.core.StandardHost.start(StandardHost.java:736)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1014)
     at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:443)
     at org.apache.catalina.core.StandardService.start(StandardService.java:448)
     at org.apache.catalina.core.StandardServer.start(StandardServer.java:700)
     at org.apache.catalina.startup.Catalina.start(Catalina.java:552)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:295)
     at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:433)
10-sep-2007 14:16:14 org.apache.commons.modeler.Registry registerComponent
SEVERE: Null component Catalina:type=JspMonitor,name=jsp,WebModule=//localhost/,J2EEApplication=none,J2EEServer=none
10-sep-2007 14:16:14 org.apache.coyote.http11.Http11BaseProtocol start
INFO: Starting Coyote HTTP/1.1 on http-8090
10-sep-2007 14:16:15 org.apache.jk.common.ChannelSocket init
INFO: JK: ajp13 listening on /0.0.0.0:8009
10-sep-2007 14:16:15 org.apache.jk.server.JkMain start
INFO: Jk running ID=0 time=0/187 config=null
10-sep-2007 14:16:15 org.apache.catalina.storeconfig.StoreLoader load
INFO: Find registry server-registry.xml at classpath resource
10-sep-2007 14:16:15 org.apache.catalina.startup.Catalina start
INFO: Server startup in 3578 ms
Many Thanks in advance for any help!!
Grz Barbera

hi istvan,
we are also migrating from websphere to netweaver.
But in spring framework we r facing problems.
We hav spring-beans.jar file in lib dir of Web Application. But When we are creating BeanFactory from xml as,
BeanFactory beanFactory = new ClassPathXmlApplicationContext ("client-config.xml");
clent-config.xml file contains :
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE beans PUBLIC "-//SPRING//DTD BEAN//EN" "http://www.springframework.org/dtd/spring-beans.dtd">
<beans>
     <bean id="propertyConfigurer" class="org.springframework.beans.factory.config.PropertyPlaceholderConfigurer" >
          <property name="location">
               <value>conf/service-client/client.properties</value>
          </property>
     </bean></beans>
But code is giving exception: ClassNotFoundException -org.springframework.beans.factory.config.PropertyPlaceholderConfigurer.
Wat is the problem ?
Kindly help.
We are also using JAAS for authentication.We are refering above code from our LoginModules login() method.
Regards,
sagar.

Please help!! Newbie here really need help. Numlock, divers, backup, recovery disk

Similar Messages

Maybe you are looking for