Please help! - No Input No Output

I only have the "Soundflower" options in the Audio
Midi setup utility! I have no clue what happened. I
didn't do anything major that would cause this
change. Is there a place I can get the built-in audio
drivers?
Did you ever get this problem fixed? I'm having a similar problem with my G4. Any suggestions?

Similar Messages

PLEASE help me with Batch Output Filenames

Hi All,
I batch output hundreds of clips every day. And I'm stuck having to rename all of my files because Compressor appends the destination folder's name to the filename after Batch output. Can someone help me figure out how to retain the ability to output to my destination, but not have the destination folder name added to the file name. I spend more time renaming files than working!!!
Please help!
Thanks.

Prior to loading the batch, create a Custom Destination. In the process of creating your Custom Destination, you'll be given the option (in the Inspector) of what Compressor will call the output files, so make sure to use something like Source Media and nuke any appendages.
When you know choose the Destination for your Encodes, so long as you set a pre-defined destination - that is, something that is set prior to the import of your files - you won't have all that junk added to your file name.
Another handy thing that I do when I do mass encodes to to use Compressor's Default Setting and Default Destination settings - available under Preferences - to speed things up. With a default setting and destination set, I simply import my files (Compressor automatically adds the setting and destination for each file), save my batch, if necessary, then submit. I then adjust the Preferences settings for the next batch, then import those files. And so on...
Basically, as much as possible, the idea is to setup your targets (Destinations and Settings) ahead of time.
But be mindful: All this won't work without pre-set (usually Custom) Destinations and Settings. Thinking you can do this after you've imported your files is not the way to go...

Please Help (Mouse input and graphics for small game)

Hi everyone, I'm new to this forum, but it looked like a good place to get some help with a simple-ish game I've been working on. I sorta posted the beginnings of it on a forum dedicated to another cool game called Soldat.
So that I don't have to retype much about the game itself, the link to the discussion is here (please mind the non-dev talk in there):
http://www.soldatforums.com/topic.asp?topic_id=20916
and the start of the 'game' is here:
http://llsc.us/members/Solidarnosc/uploads/SolidarnoscNew.jar
Anyhow, I need some advice on fast graphics. My game is sorta 3D (sorta-3D = that enigmatic 3D look in a 3D environment with sprites and no perspective), but I managed to use some simple mathematics and the basic AWT drawing methods to replicate 3D. The problem is that this is rather slow.
I have started to have a look at different methods of drawing such as OpenGL using JOGL etc, but this is all rather daunting at the moment for someone somewhat self taught (OK, I have done a bit of Java at high school, but it didn't get as far as using such big words as Classpath, Package, let alone Buffer) and I seem to have a curse like Tubbers when it comes to semi-complicated tutorials. Ideally, it would be handy if there was a very simple example or a class that extended a Frame or something similar that had a modified graphics/drawing system with a 'perfect' buffering system (OK, maybe I'm dreaming).
The other thing that I need help with is mouse movement detection. Currently, I am using a simple system of reading the mouse position on the frame to determine movement, but ideally I need a system that allows the mouse to keep moving without the constraints of the cursor needing to be in the form and not moving at edges of screen, etc.
Help would be appreciated, but thanks for reading this anyway.

Maybe I'm not making myself clear here (or maybe I
missed a sign that that said "open source only"). I
don't need a part of my program fixed by someone else
as such, but rather I was just wondering what the
easiest way to speed up AWT graphics is and how can I
read mouse motion (specific to neither the cursor nor
the application's frame) or even just set the
cursor's position relative to frame. Failing that,
can someone tell me how I should read mouse input in
a way similar to a standard First Person Shooter?Unless I am missunderstanding what you want again, then take a look at AWT's Toolkit, it has
public void addAWTEventListener(AWTEventListener listener,
long eventMask)and it should do what you want.

Please help regarding XML Publisher Output

Hi,
I have bugs in my XML Template, please can any one help me to correct the template which i have designed.
Regards
Prabu

Hi Prabhu:
Did you try using the Template Viewer? (remember to change the Debug log level to Maximum).
If you are using Word then you can try validation, although it failed to tell me errors at times (bug in deleting the cache?)
Usually you will be able to find out. If it neither of these works, I normally fall back to the tried and tested method; Start afresh, add one complexity at a time and test it.
HTH
Srini Ramanujam

Please help with input

Sorry just trying to save some time. Instead of going through pages and pages, i would rather just ask someone. I am planning on getting the K8N SLI-F motherboard and will be running 1gb (2 512mb sticks) of Geil Ultra Platinum PC3200 ram. Are there any known conflicts with this setup? Not that it should matter but i will be running an AMD 64 3200+ cpu and will likely not do much overclocking (if any).

Shouldn't be have a problem with that. But make sure you've the gd PSU.

I believe that I have a keylogger or some sort of spyware installed on my mac, please help!

I followed this procedure to check my files:
Please read this whole message before doing anything.
The following procedure will help whether your system has been modified. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the page that opens.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Copy or drag — do not type — the line below into the Terminal window, then press return:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Step 5
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
You can then quit Terminal.
I believe that I have a keylogger or some sort of spyware installed on my mac, please help!
POST YOUR OUTPUT FOR REVIEW/COMMENT.
After running these commands, here is the output. Can you please tell me if you see anything here. I would be so grateful.
com.oxsemi.driver.OxsemiDeviceType00 (1.28.13)
at.obdev.nke.LittleSnitch (4052)
Password:
com.wdc.WDSmartWareServer
com.wdc.WDDMservice
com.sierrawireless.SwitchTool
com.oracle.java.JavaUpdateHelper
com.oracle.java.Helper-Tool
com.microsoft.office.licensing.helper
com.lacie.desktopmanager.service
com.google.keystone.daemon
com.adobe.fpsaud
at.obdev.littlesnitchd
jp.buffalo.NASPower
com.oracle.java.Java-Updater
com.lacie.eventsactions.launcher.agent
com.hp.messagecenter.launcher
com.hp.devicemonitor
com.google.keystone.system.agent
at.obdev.LittleSnitchUIAgent
com.nds.pcshow.uninstall
com.nds.pcshow
com.facebook.videochat.thomasbrown.updater
com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae
com.adobe.AAM.Scheduler-1.0
LaCie DiscRecording/LaCie DiscRecording.pkg:
Contents
/Library/Address Book Plug-Ins:
/Library/Components:
/Library/Extensions:
/Library/Frameworks:
AEProfiling.framework
AERegistration.framework
Adobe AIR.framework
AudioMixEngine.framework
EWSMac.framework
HPDeviceModel.framework
HPPml.framework
HPScan.framework
HPServicesInterface.framework
HPSmartPrint.framework
HPSmartX.framework
NyxAudioAnalysis.framework
PluginManager.framework
Snapfish.framework
iLifeFaceRecognition.framework
iLifeKit.framework
iLifePageLayout.framework
iLifeSQLAccess.framework
iLifeSlideshow.framework
iTunesLibrary.framework
/Library/Input Methods:
/Library/Internet Plug-Ins:
AdobePDFViewer.plugin
Flash Player.plugin
JavaAppletPlugin.plugin
Quartz Composer.webplugin
QuickTime Plugin.plugin
SharePointBrowserPlugin.plugin
SharePointWebKitPlugin.webplugin
Silverlight.plugin
flashplayer.xpt
googletalkbrowserplugin.plugin
iPhotoPhotocast.plugin
npgtpo3dautoplugin.plugin
nsIQTScriptablePlugin.xpt
o1dbrowserplugin.plugin
/Library/Keyboard Layouts:
/Library/LaunchAgents:
at.obdev.LittleSnitchUIAgent.plist
com.adobe.AAM.Updater-1.0.plist
com.google.keystone.agent.plist
com.hp.devicemonitor.plist
com.hp.messagecenter.launcher.plist
com.lacie.eventsactions.launcher.agent.plist
com.oracle.java.Java-Updater.plist
jp.buffalo.NASPower.plist
jp.buffalo.NASPower_pla.plist
/Library/LaunchDaemons:
at.obdev.littlesnitchd.plist
com.adobe.fpsaud.plist
com.apple.remotepairtool.plist
com.google.keystone.daemon.plist
com.lacie.desktopmanager.service.plist
com.microsoft.office.licensing.helper.plist
com.oracle.java.Helper-Tool.plist
com.oracle.java.JavaUpdateHelper.plist
com.sierrawireless.SwitchTool.plist
com.wdc.WDDMservice.plist
com.wdc.WDSmartWareServer.plist
/Library/PreferencePanes:
Flash Player.prefPane
HP Scanjet.prefPane
JavaControlPanel.prefPane
/Library/PrivilegedHelperTools:
.DS_Store
NasNavigator2.app
com.microsoft.office.licensing.helper
com.oracle.java.JavaUpdateHelper
/Library/QuickLook:
GBQLGenerator.qlgenerator
iWork.qlgenerator
/Library/QuickTime:
AppleIntermediateCodec.component
AppleMPEG2Codec.component
/Library/ScriptingAdditions:
/Library/Spotlight:
GBSpotlightImporter.mdimporter
Microsoft Entourage.mdimporter
Microsoft Office.mdimporter
iWeb.mdimporter
iWork.mdimporter
/Library/StartupItems:
ChmodBPF
HP IO
LocSvc
/etc/mach_init.d:
/etc/mach_init_per_login_session.d:
/etc/mach_init_per_user.d:
Library/Address Book Plug-Ins:
SkypeABDialer.bundle
SkypeABSMS.bundle
Library/Fonts:
04b-08.suit
Arial
Brush Script
Times New Roman
Verdana
Wingdings
Wingdings 2
Wingdings 3
encodings.dir
fonts.dir
fonts.list
fonts.scale
Library/Frameworks:
EWSMac.framework
Library/Internet Plug-Ins:
FacebookVideoCalling.bundle
Move-Media-Player.plugin
PlayerPlugin.bundle
fbplugin_1_0_3.plugin
Library/Keyboard Layouts:
Library/LaunchAgents:
com.adobe.AAM.Updater-1.0.plist
com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
com.facebook.videochat.thomasbrown.plist
com.nds.pcshow.plist
com.nds.pcshow.uninstall.plist
Library/PreferencePanes:
Opera Preferences
TomTomHOMERunner, LDMStatusItem, apple-scc-20130209-112927
thank you much for helping...sincerely. tlenbro.

I followed this procedure to check my files:
Please read this whole message before doing anything.
The following procedure will help whether your system has been modified. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the page that opens.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Copy or drag — do not type — the line below into the Terminal window, then press return:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Step 5
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
You can then quit Terminal.
I believe that I have a keylogger or some sort of spyware installed on my mac, please help!
POST YOUR OUTPUT FOR REVIEW/COMMENT.
After running these commands, here is the output. Can you please tell me if you see anything here. I would be so grateful.
com.oxsemi.driver.OxsemiDeviceType00 (1.28.13)
at.obdev.nke.LittleSnitch (4052)
Password:
com.wdc.WDSmartWareServer
com.wdc.WDDMservice
com.sierrawireless.SwitchTool
com.oracle.java.JavaUpdateHelper
com.oracle.java.Helper-Tool
com.microsoft.office.licensing.helper
com.lacie.desktopmanager.service
com.google.keystone.daemon
com.adobe.fpsaud
at.obdev.littlesnitchd
jp.buffalo.NASPower
com.oracle.java.Java-Updater
com.lacie.eventsactions.launcher.agent
com.hp.messagecenter.launcher
com.hp.devicemonitor
com.google.keystone.system.agent
at.obdev.LittleSnitchUIAgent
com.nds.pcshow.uninstall
com.nds.pcshow
com.facebook.videochat.thomasbrown.updater
com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae
com.adobe.AAM.Scheduler-1.0
LaCie DiscRecording/LaCie DiscRecording.pkg:
Contents
/Library/Address Book Plug-Ins:
/Library/Components:
/Library/Extensions:
/Library/Frameworks:
AEProfiling.framework
AERegistration.framework
Adobe AIR.framework
AudioMixEngine.framework
EWSMac.framework
HPDeviceModel.framework
HPPml.framework
HPScan.framework
HPServicesInterface.framework
HPSmartPrint.framework
HPSmartX.framework
NyxAudioAnalysis.framework
PluginManager.framework
Snapfish.framework
iLifeFaceRecognition.framework
iLifeKit.framework
iLifePageLayout.framework
iLifeSQLAccess.framework
iLifeSlideshow.framework
iTunesLibrary.framework
/Library/Input Methods:
/Library/Internet Plug-Ins:
AdobePDFViewer.plugin
Flash Player.plugin
JavaAppletPlugin.plugin
Quartz Composer.webplugin
QuickTime Plugin.plugin
SharePointBrowserPlugin.plugin
SharePointWebKitPlugin.webplugin
Silverlight.plugin
flashplayer.xpt
googletalkbrowserplugin.plugin
iPhotoPhotocast.plugin
npgtpo3dautoplugin.plugin
nsIQTScriptablePlugin.xpt
o1dbrowserplugin.plugin
/Library/Keyboard Layouts:
/Library/LaunchAgents:
at.obdev.LittleSnitchUIAgent.plist
com.adobe.AAM.Updater-1.0.plist
com.google.keystone.agent.plist
com.hp.devicemonitor.plist
com.hp.messagecenter.launcher.plist
com.lacie.eventsactions.launcher.agent.plist
com.oracle.java.Java-Updater.plist
jp.buffalo.NASPower.plist
jp.buffalo.NASPower_pla.plist
/Library/LaunchDaemons:
at.obdev.littlesnitchd.plist
com.adobe.fpsaud.plist
com.apple.remotepairtool.plist
com.google.keystone.daemon.plist
com.lacie.desktopmanager.service.plist
com.microsoft.office.licensing.helper.plist
com.oracle.java.Helper-Tool.plist
com.oracle.java.JavaUpdateHelper.plist
com.sierrawireless.SwitchTool.plist
com.wdc.WDDMservice.plist
com.wdc.WDSmartWareServer.plist
/Library/PreferencePanes:
Flash Player.prefPane
HP Scanjet.prefPane
JavaControlPanel.prefPane
/Library/PrivilegedHelperTools:
.DS_Store
NasNavigator2.app
com.microsoft.office.licensing.helper
com.oracle.java.JavaUpdateHelper
/Library/QuickLook:
GBQLGenerator.qlgenerator
iWork.qlgenerator
/Library/QuickTime:
AppleIntermediateCodec.component
AppleMPEG2Codec.component
/Library/ScriptingAdditions:
/Library/Spotlight:
GBSpotlightImporter.mdimporter
Microsoft Entourage.mdimporter
Microsoft Office.mdimporter
iWeb.mdimporter
iWork.mdimporter
/Library/StartupItems:
ChmodBPF
HP IO
LocSvc
/etc/mach_init.d:
/etc/mach_init_per_login_session.d:
/etc/mach_init_per_user.d:
Library/Address Book Plug-Ins:
SkypeABDialer.bundle
SkypeABSMS.bundle
Library/Fonts:
04b-08.suit
Arial
Brush Script
Times New Roman
Verdana
Wingdings
Wingdings 2
Wingdings 3
encodings.dir
fonts.dir
fonts.list
fonts.scale
Library/Frameworks:
EWSMac.framework
Library/Internet Plug-Ins:
FacebookVideoCalling.bundle
Move-Media-Player.plugin
PlayerPlugin.bundle
fbplugin_1_0_3.plugin
Library/Keyboard Layouts:
Library/LaunchAgents:
com.adobe.AAM.Updater-1.0.plist
com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
com.facebook.videochat.thomasbrown.plist
com.nds.pcshow.plist
com.nds.pcshow.uninstall.plist
Library/PreferencePanes:
Opera Preferences
TomTomHOMERunner, LDMStatusItem, apple-scc-20130209-112927
thank you much for helping...sincerely. tlenbro.

1 input file to 2 output file mapping. Please help!

Hi Experts,
I have a snenario where from one input file I have to generate two output files. My sender and receiver systems are the same since I want to generate the output files in the same location. I am using both the systems same just for testing purpose.
So in IR I have created
1. one outbound interface for the input file
2. two inbound interfaces for the output files
3. one message mapping containing one input message
      transformation to two output messages.
4. one interface mapping containing one input interface
      transformation to two output interfaces.
In ID I have created
    1. one file sender channel and two receiver channels for two output files with different names.
    2. two receiver agreements
    3. one sender agreement
    4. one interface determination of type "Enhanced".
    5. one receiver determination
But when I run the scenario given one valid input file I am getting the error in the sxmb_moni : RuntimeException in Message-Mapping transformation: Cannot produce target element.
However message mapping and interface mapping works perfectly if I test it in IR with the same input file.
Can somebody help me understand what I might be doing wrong?
Have I done the configuration correctly for 1:N mapping?
Please help! I will be greatfull to you if you can help me.
Thanks
Gopal

If my input file is like this:
   <ns1:LocationMsg_MT xmlns:ns1="http://www.abc.com/Gopal">
         <Location>
         </Location>
</ns1:LocationMsg_MT >
Then my scenario is working.
But my input file will be like this:
<LocationMsg_MT>
         <Location>
         </Location>
<LocationMsg_MT >
This is giving problem.
How to handle this kind of file?
Thanks
Gopal
Edited by: gopalkrishna baliga on Mar 14, 2008 3:19 PM

Hi, iam facing proble in synchronizing 4 ni 4472 cards input with pxi -6052e analog output. please help me out to sort out this problem

hi, iam facing problem in synchronizing 4 ni 4472 cards input with pxi -6052e analog output. please help me out to sort out this problem

Hi achyuth,
Thank you for posting on the National Instruments forum.
I am not sure what you are trying to do. Are you trying to input and output at the
same time? Are you just trying to
synchronize all of your inputs? Do you
want them to run off the same clock? If
you could, give me some more information so I can understand your problem
better.
In the meantime, this might help you:
PXI Timing,
Triggering, and Synchronization Capabilities of E-Series Multifunction Data
Acquisition ...
PXI Timing and Synchronization
Thank You,
Nick F.
Applications Engineer

Please Help - How to pass Table objects as input and output parameters using VC++

Please help me by giving a sample code to call the procedure
GetClassInstanceProperties from a VC++ application using
Oracle Objects for OLE
CREATE OR REPLACE TYPE TY_INST_ID_PROP_PAIR AS OBJECT
(INST_ID CHAR(38), PROP_ID CHAR(38), VALUE XMLTYPE);
CREATE OR REPLACE PACKAGE DBMS_PROPERTYSTORE
AUTHID CURRENT_USER
AS
     --Used to return the ids from the functions
     TYPE tt_UUIDs IS TABLE OF char(38) index by binary_integer;
     TYPE tt_inst_id_prop_pairs is table of ty_inst_id_prop_pair index by binary_integer;
     PROCEDURE GetClassInstanceProperties(ClassId IN char, Prop_Ids in TT_UUIDs,
Inst_Id_Prop_Pairs out TT_Inst_Id_Prop_Pair);
END DBMS_PROPERTYSTORE;
CREATE OR REPLACE PACKAGE BODY DBMS_PROPERTYSTORE AS
     PROCEDURE GetClassInstanceProperties
          ClassId IN char,
          Prop_Ids in TT_UUIDs,
          Inst_Id_Prop_Pairs out TT_INST_ID_PROP_PAIR
     AS
     BEGIN
          --Return the instanceid,propertyid and values for a certain class
          --only return those properties that in the user supplied Prop_ids table
          FOR I in Prop_Ids.FIRST..Prop_Ids.LAST loop
               select TY_Inst_Id_Prop_Pair(i.Inst_Id,p.Prop_Id,p.Value) into Inst_Id_Prop_Pairs(I)
                    from TBL_Instance i, table(Prop_Pairs) p
                    where I.Cls_Id.Cls_Id=ClassID
                    and p.Prop_Id = Prop_Ids(I);
          END LOOP;
     EXCEPTION
          WHEN NO_DATA_FOUND THEN
               raise_application_error(-20100, 'No data found');
          WHEN OTHERS THEN
               raise_application_error(-20200, SQLERRM);
     END GetClassInstanceProperties;
END DBMS_PROPERTYSTORE;

HI
Go to the lay out of your screen and doublr click on the table control fields, you can get the Properties/Attribute of the screen or table control Fields
Assing a Group GRP1 for all the fields i n the table control.
in PBO
if ok_code = 'INPUT'.
LOOP AT SCREEN.
IF screen-grp1 = 'GRP1'.
screen-input = 1.
modify screen.
endif.
ENDLOOP.
elseif ok_code = 'OUTPUT'.
LOOP AT SCREEN.
if screen-grp1 = 'GRP1'.
screen-input = 0.
modify screen.
endif.
endloop.
endif.
Regards
Ramchander Rao.K
Edited by: Ramchander Krishnamraju on Aug 8, 2009 5:27 AM

Please help! preview input in FML

Hi... I am using FML 3.1 on my Mac but using Parallels so it's running in Windows 7. I am using a Logitech quickcam pro af and for some reason my preview input looks too bright/no contrast while the output preview looks just great. How do I fix my preview input so that it looks true? Below is a picture of what I'm talking about... please help, I have no idea what's wrong and I've been googling for the last half hour trying to find others with same problem but having NO luck!
Thanks!

Just check if your crop checkbox is not checked. If it is, please uncheck it, and see if things improve. Just a guess, though I am not sure, if that is the casue of the problem.
Just one question, I needed to ask. FMLE 3.1 is available for MAC, so why do you need it to run on Parallels. FMLE 3.1 (MAC version) would run directly on MAC.
Try downloading the FMLE 3.1 for MAC from adobe.com, and see if the problem exists.

Please help! error -61399, how to create custom vi for every input in project explorer

Please help! I have been trying whole night but couldn't get through it.
I am creating custom vi to simulate cRIO inputs on development computer. ( FPGA target>>execute vi on>> development computer>>custom vi) I then follow tutorial creating test benches:
Tutorial: Creating Test Benches (FPGA Module)
but when I run fpga vi I get error -61399, input item/node is not supported (input item/node is my input which I've added from project explorer).
The closest I got in my research on why this error is occuring- I have not connected all inputs/outputs in project explorer to custom vi. I followed tutorial exactly step by step but still I couldn't get through it.
Please help! Please help!
In order to do further investigation, I converted custom vi to a state machine , please find attachment. Having highlight execution on, it clearly demonstrates that input in cRIO are not being selected as a result default cases execute.
Please find attached modified custom vi with state machine, fpga vi, and original custom vi.
Best regards
Ta
Attachments:
custom vi.vi ‏32 KB
inverter.vi ‏16 KB
original custom vi.vi ‏22 KB

Solution:
You will see this error if no Custom VI has been selected or the Custom VI has not been configured for every I/O item that you are using in your FPGA code???
I think that's exactly where I'm stuck!
How do I configure it for inputs??? My attachement show that I have done everything being asked in tutorial!
Thanks!

Strange input errors, please help

ok, Ive been following a tutorial located here. I just got to section 2.4 and the tutorial says that it would be easier to allow input with his program. So I downloaded his program, compiled it, cheked to make sure that the compiled TextIO.class was in the right place. (BTW, Im running NetBeans IDE 4.0 beta 2). This is my program...:
public class helloworld2 {
    // a prog to display hello world
    public static void main(String[] args) {
        double hellonumber;
        double hellonumber2;
        int userImput; //imput tut. the number imputed
        int square; //imput tut. userimput squared
        hellonumber = 7777;
        hellonumber2 = 6666;
        System.out.println("Hello World"); // how to print words
        System.out.print(hellonumber); // variable use....duh
        System.out.println(" Is the number of the day");
        System.out.print(hellonumber2); // and again
        System.out.println(" Is the other number of the day");
        System.out.print("The square root of the number of the day is ");
        System.out.println(Math.sqrt(7777)); // square root
        System.out.print("Wow! The amount of letters in this sentance is ");
        System.out.println("Wow! The amount of letters in this sentance is".length()); //this is used to count letters, punctuation, and spaces in the aforementioned sentance
        System.out.println("cat".toUpperCase()); //makes aforementioned sentance in all caps
        System.out.println("CAT".toLowerCase()); // same as above but opposite
        //begin imput tut.
        System.out.print("Please type a number: ");
        userImput = TextIO.getInt();
        square = userImput * userImput;
        System.out.print("The square of that number is ");
        System.out.println(square);
}       //doneThis is the program I got off of the tutorial site, it is supposed to make input easier, but instead gets errors
The file defines a class TextIO, which provides a simple interface
to Java's standard console input and output. This class defines
several static methods for reading and writing
values of various type.
This class will only work with standard, interactive applications.
When it is used in such an application, System.out and System.in
should not be used directly, since the TextIO class thinks it has
exclusive control of System.out and System.in. (Actually, using
System.out will probably not cause any problems, but don't use
System.in.)
To use this class in your program, simply include the compiled class
file TextIO.class in the same directory with the class file for your
main program. (If you are using a development environment such as
CodeWarrior or Visual J++, you can include the source file,
TextIO.java in your project.) You can then use all the public static methods
from the TextIO class in your program. (In your programs, the names
of the methods must be prefaced with "TextIO." For example, you should
use the name TextIO.getln() rather than simply getln().)
(This class is for use with my on-line introductory java textbook,
which is available at http://math.hws.edu/eck/cs124/notes/index.html.)
Written by: David Eck
Department of Mathematics and Computer Science
Hobart and William Smith Colleges
Geneva, NY 14456
Email: [email protected]
WWW: http://math.hws.edu/eck/
July 16, 1998
Modified February, 2000; getChar() now skips blanks and CR's, and getAnyChar()
can be used to read the next char even if it's a blank or CR.
import java.io.*;
public class TextIO {
// *************************** I/O Methods *********************************
// Methods for writing the primitive types, plus type String,
// to the console, with no extra spaces.
// Note that the real-number data types, float
// and double, a rounded version is output that will
// use at most 10 or 11 characters. If you want to
// output a real number with full accuracy, use
// "TextIO.put(String.valueOf(x))", for example.
public static void put(int x) { put(x,0); } // Note: also handles byte and short!
public static void put(long x) { put(x,0); }
public static void put(double x) { put(x,0); } // Also handles float.
public static void put(char x) { put(x,0); }
public static void put(boolean x) { put(x,0); }
public static void put(String x) { put(x,0); }
// Methods for writing the primitive types, plus type String,
// to the console,followed by a carriage return, with
// no extra spaces.
public static void putln(int x) { put(x,0); newLine(); } // Note: also handles byte and short!
public static void putln(long x) { put(x,0); newLine(); }
public static void putln(double x) { put(x,0); newLine(); } // Also handles float.
public static void putln(char x) { put(x,0); newLine(); }
public static void putln(boolean x) { put(x,0); newLine(); }
public static void putln(String x) { put(x,0); newLine(); }
// Methods for writing the primitive types, plus type String,
// to the console, with a minimum field width of w,
// and followed by a carriage return.
// If output value is less than w characters, it is padded
// with extra spaces in front of the value.
public static void putln(int x, int w) { put(x,w); newLine(); } // Note: also handles byte and short!
public static void putln(long x, int w) { put(x,w); newLine(); }
public static void putln(double x, int w) { put(x,w); newLine(); } // Also handles float.
public static void putln(char x, int w) { put(x,w); newLine(); }
public static void putln(boolean x, int w) { put(x,w); newLine(); }
public static void putln(String x, int w) { put(x,w); newLine(); }
// Method for outputting a carriage return
public static void putln() { newLine(); }
// Methods for writing the primitive types, plus type String,
// to the console, with minimum field width w.
public static void put(int x, int w) { dumpString(String.valueOf(x), w); } // Note: also handles byte and short!
public static void put(long x, int w) { dumpString(String.valueOf(x), w); }
public static void put(double x, int w) { dumpString(realToString(x), w); } // Also handles float.
public static void put(char x, int w) { dumpString(String.valueOf(x), w); }
public static void put(boolean x, int w) { dumpString(String.valueOf(x), w); }
public static void put(String x, int w) { dumpString(x, w); }
// Methods for reading in the primitive types, plus "words" and "lines".
// The "getln..." methods discard any extra input, up to and including
// the next carriage return.
// A "word" read by getlnWord() is any sequence of non-blank characters.
// A "line" read by getlnString() or getln() is everything up to next CR;
// the carriage return is not part of the returned value, but it is
// read and discarded.
// Note that all input methods except getAnyChar(), peek(), the ones for lines
// skip past any blanks and carriage returns to find a non-blank value.
// getln() can return an empty string; getChar() and getlnChar() can
// return a space or a linefeed ('\n') character.
// peek() allows you to look at the next character in input, without
// removing it from the input stream. (Note that using this
// routine might force the user to enter a line, in order to
// check what the next character is.)
// Acceptable boolean values are the "words": true, false, t, f, yes,
// no, y, n, 0, or 1; uppercase letters are OK.
// None of these can produce an error; if an error is found in input,
// the user is forced to re-enter.
// Available input routines are:
// getByte() getlnByte() getShort() getlnShort()
// getInt() getlnInt() getLong() getlnLong()
// getFloat() getlnFloat() getDouble() getlnDouble()
// getChar() getlnChar() peek() getAnyChar()
// getWord() getlnWord() getln() getString() getlnString()
// (getlnString is the same as getln and is only provided for consistency.)
public static byte getlnByte() { byte x=getByte(); emptyBuffer(); return x; }
public static short getlnShort() { short x=getShort(); emptyBuffer(); return x; }
public static int getlnInt() { int x=getInt(); emptyBuffer(); return x; }
public static long getlnLong() { long x=getLong(); emptyBuffer(); return x; }
public static float getlnFloat() { float x=getFloat(); emptyBuffer(); return x; }
public static double getlnDouble() { double x=getDouble(); emptyBuffer(); return x; }
public static char getlnChar() { char x=getChar(); emptyBuffer(); return x; }
public static boolean getlnBoolean() { boolean x=getBoolean(); emptyBuffer(); return x; }
public static String getlnWord() { String x=getWord(); emptyBuffer(); return x; }
public static String getlnString() { return getln(); } // same as getln()
public static String getln() {
StringBuffer s = new StringBuffer(100);
char ch = readChar();
while (ch != '\n') {
s.append(ch);
ch = readChar();
return s.toString();
public static byte getByte() { return (byte)readInteger(-128L,127L); }
public static short getShort() { return (short)readInteger(-32768L,32767L); }
public static int getInt() { return (int)readInteger((long)Integer.MIN_VALUE, (long)Integer.MAX_VALUE); }
public static long getLong() { return readInteger(Long.MIN_VALUE, Long.MAX_VALUE); }
public static char getAnyChar(){ return readChar(); }
public static char peek() { return lookChar(); }
public static char getChar() { // skip spaces & cr's, then return next char
char ch = lookChar();
while (ch == ' ' || ch == '\n') {
readChar();
if (ch == '\n')
dumpString("? ",0);
ch = lookChar();
return readChar();
public static float getFloat() {
float x = 0.0F;
while (true) {
String str = readRealString();
if (str.equals("")) {
errorMessage("Illegal floating point input.",
"Real number in the range " + Float.MIN_VALUE + " to " + Float.MAX_VALUE);
else {
Float f = null;
try { f = Float.valueOf(str); }
catch (NumberFormatException e) {
errorMessage("Illegal floating point input.",
"Real number in the range " + Float.MIN_VALUE + " to " + Float.MAX_VALUE);
continue;
if (f.isInfinite()) {
errorMessage("Floating point input outside of legal range.",
"Real number in the range " + Float.MIN_VALUE + " to " + Float.MAX_VALUE);
continue;
x = f.floatValue();
break;
return x;
public static double getDouble() {
double x = 0.0;
while (true) {
String str = readRealString();
if (str.equals("")) {
errorMessage("Illegal floating point input",
"Real number in the range " + Double.MIN_VALUE + " to " + Double.MAX_VALUE);
else {
Double f = null;
try { f = Double.valueOf(str); }
catch (NumberFormatException e) {
errorMessage("Illegal floating point input",
"Real number in the range " + Double.MIN_VALUE + " to " + Double.MAX_VALUE);
continue;
if (f.isInfinite()) {
errorMessage("Floating point input outside of legal range.",
"Real number in the range " + Double.MIN_VALUE + " to " + Double.MAX_VALUE);
continue;
x = f.doubleValue();
break;
return x;
public static String getWord() {
char ch = lookChar();
while (ch == ' ' || ch == '\n') {
readChar();
if (ch == '\n')
dumpString("? ",0);
ch = lookChar();
StringBuffer str = new StringBuffer(50);
while (ch != ' ' && ch != '\n') {
str.append(readChar());
ch = lookChar();
return str.toString();
public static boolean getBoolean() {
boolean ans = false;
while (true) {
String s = getWord();
if ( s.equalsIgnoreCase("true") || s.equalsIgnoreCase("t") ||
s.equalsIgnoreCase("yes") || s.equalsIgnoreCase("y") ||
s.equals("1") ) {
ans = true;
break;
else if ( s.equalsIgnoreCase("false") || s.equalsIgnoreCase("f") ||
s.equalsIgnoreCase("no") || s.equalsIgnoreCase("n") ||
s.equals("0") ) {
ans = false;
break;
else
errorMessage("Illegal boolean input value.",
"one of: true, false, t, f, yes, no, y, n, 0, or 1");
return ans;
// ***************** Everything beyond this point is private *******************
// ********************** Utility routines for input/output ********************
private static InputStream in = System.in; // rename standard input stream
private static PrintStream out = System.out; // rename standard output stream
private static String buffer = null; // one line read from input
private static int pos = 0; // position of next char in input line that has
// not yet been processed
private static String readRealString() { // read chars from input following syntax of real numbers
StringBuffer s=new StringBuffer(50);
char ch=lookChar();
while (ch == ' ' || ch == '\n') {
readChar();
if (ch == '\n')
dumpString("? ",0);
ch = lookChar();
if (ch == '-' || ch == '+') {
s.append(readChar());
ch = lookChar();
while (ch == ' ') {
readChar();
ch = lookChar();
while (ch >= '0' && ch <= '9') {
s.append(readChar());
ch = lookChar();
if (ch == '.') {
s.append(readChar());
ch = lookChar();
while (ch >= '0' && ch <= '9') {
s.append(readChar());
ch = lookChar();
if (ch == 'E' || ch == 'e') {
s.append(readChar());
ch = lookChar();
if (ch == '-' || ch == '+') {
s.append(readChar());
ch = lookChar();
while (ch >= '0' && ch <= '9') {
s.append(readChar());
ch = lookChar();
return s.toString();
private static long readInteger(long min, long max) { // read long integer, limited to specified range
long x=0;
while (true) {
StringBuffer s=new StringBuffer(34);
char ch=lookChar();
while (ch == ' ' || ch == '\n') {
readChar();
if (ch == '\n')
dumpString("? ",0);
ch = lookChar();
if (ch == '-' || ch == '+') {
s.append(readChar());
ch = lookChar();
while (ch == ' ') {
readChar();
ch = lookChar();
while (ch >= '0' && ch <= '9') {
s.append(readChar());
ch = lookChar();
if (s.equals("")){
errorMessage("Illegal integer input.",
"Integer in the range " + min + " to " + max);
else {
String str = s.toString();
try {
x = Long.parseLong(str);
catch (NumberFormatException e) {
errorMessage("Illegal integer input.",
"Integer in the range " + min + " to " + max);
continue;
if (x < min || x > max) {
errorMessage("Integer input outside of legal range.",
"Integer in the range " + min + " to " + max);
continue;
break;
return x;
private static String realToString(double x) {
// Goal is to get a reasonable representation of x in at most
// 10 characters, or 11 characters if x is negative.
if (Double.isNaN(x))
return "undefined";
if (Double.isInfinite(x))
if (x < 0)
return "-INF";
else
return "INF";
if (Math.abs(x) <= 5000000000.0 && Math.rint(x) == x)
return String.valueOf( (long)x );
String s = String.valueOf(x);
if (s.length() <= 10)
return s;
boolean neg = false;
if (x < 0) {
neg = true;
x = -x;
s = String.valueOf(x);
if (x >= 0.00005 && x <= 50000000 && (s.indexOf('E') == -1 && s.indexOf('e') == -1)) { // trim x to 10 chars max
s = round(s,10);
s = trimZeros(s);
else if (x > 1) { // construct exponential form with positive exponent
long power = (long)Math.floor(Math.log(x)/Math.log(10));
String exp = "E" + power;
int numlength = 10 - exp.length();
x = x / Math.pow(10,power);
s = String.valueOf(x);
s = round(s,numlength);
s = trimZeros(s);
s += exp;
else { // constuct exponential form
long power = (long)Math.ceil(-Math.log(x)/Math.log(10));
String exp = "E-" + power;
int numlength = 10 - exp.length();
x = x * Math.pow(10,power);
s = String.valueOf(x);
s = round(s,numlength);
s = trimZeros(s);
s += exp;
if (neg)
return "-" + s;
else
return s;
private static String trimZeros(String num) { // used by realToString
if (num.indexOf('.') >= 0 && num.charAt(num.length() - 1) == '0') {
int i = num.length() - 1;
while (num.charAt(i) == '0')
i--;
if (num.charAt(i) == '.')
num = num.substring(0,i);
else
num = num.substring(0,i+1);
return num;
private static String round(String num, int length) { // used by realToString
if (num.indexOf('.') < 0)
return num;
if (num.length() <= length)
return num;
if (num.charAt(length) >= '5' && num.charAt(length) != '.') {
char[] temp = new char[length+1];
int ct = length;
boolean rounding = true;
for (int i = length-1; i >= 0; i--) {
temp[ct] = num.charAt(i);
if (rounding && temp[ct] != '.') {
if (temp[ct] < '9') {
temp[ct]++;
rounding = false;
else
temp[ct] = '0';
ct--;
if (rounding) {
temp[ct] = '1';
ct--;
// ct is -1 or 0
return new String(temp,ct+1,length-ct);
else
return num.substring(0,length);
private static void dumpString(String str, int w) { // output string to console
for (int i=str.length(); i<w; i++)
out.print(' ');
for (int i=0; i<str.length(); i++)
if ((int)str.charAt(i) >= 0x20 && (int)str.charAt(i) != 0x7F) // no control chars or delete
out.print(str.charAt(i));
else if (str.charAt(i) == '\n' || str.charAt(i) == '\r')
newLine();
private static void errorMessage(String message, String expecting) {
// inform user of error and force user to re-enter.
newLine();
dumpString(" *** Error in input: " + message + "\n", 0);
dumpString(" *** Expecting: " + expecting + "\n", 0);
dumpString(" *** Discarding Input: ", 0);
if (lookChar() == '\n')
dumpString("(end-of-line)\n\n",0);
else {
while (lookChar() != '\n')
out.print(readChar());
dumpString("\n\n",0);
dumpString("Please re-enter: ", 0);
readChar(); // discard the end-of-line character
private static char lookChar() { // return next character from input
if (buffer == null || pos > buffer.length())
fillBuffer();
if (pos == buffer.length())
return '\n';
return buffer.charAt(pos);
private static char readChar() { // return and discard next character from input
char ch = lookChar();
pos++;
return ch;
private static void newLine() { // output a CR to console
out.println();
out.flush();
private static boolean possibleLinefeedPending = false;
private static void fillBuffer() { // Wait for user to type a line and press return,
// and put the typed line into the buffer.
StringBuffer b = new StringBuffer();
out.flush();
try {
int ch = in.read();
if (ch == '\n' && possibleLinefeedPending)
ch = in.read();
possibleLinefeedPending = false;
while (ch != -1 && ch != '\n' && ch != '\r') {
b.append((char)ch);
ch = in.read();
possibleLinefeedPending = (ch == '\r');
if (ch == -1) {
System.out.println("\n*** Found an end-of-file while trying to read from standard input!");
System.out.println("*** Maybe your Java system doesn't implement standard input?");
System.out.println("*** Program will be terminated.\n");
throw new RuntimeException("End-of-file on standard input.");
catch (IOException e) {
System.out.println("Unexpected system error on input.");
System.out.println("Terminating program.");
System.exit(1);
buffer = b.toString();
pos = 0;
private static void emptyBuffer() { // discard the rest of the current line of input
buffer = null;
} // end of class TextIOI know that it is a mouthful, but I go it off the tutorial site. When it didnt work, I persued finding another input program. I found one on this forum:
import java.io.*;
public class MyInput {
/**Read a string from the keyboard*/
public static String readString()
    BufferedReader br
      = new BufferedReader(new InputStreamReader(System.in), 1);
    // Declare and initialize the string
    String string = " ";
    // Get the string from the keyboard
    try
      string = br.readLine();
    catch (IOException ex)
      System.out.println(ex);
    // Return the string obtained from the keyboard
    return string;
/**Read an int value from the keyboard*/
public static int readInt()
    return Integer.parseInt(readString());
/**Read a double value from the keyboard*/
public static double readDouble()
    return Double.parseDouble(readString());
}and made a new small program to test it:
public class Driver
     public static void main ( String[] args)
          System.out.println("Enter a number");
          int number = MyInput.readInt();
          System.out.println("number entered "+ number);
          System.out.println("Enter another number");
          number = MyInput.readInt();
          System.out.println("number entered "+ number);
the output:
init:
deps-jar:
compile-single:
run-single:
Enter a number
Exception in thread "main" java.lang.NumberFormatException: null
at java.lang.Integer.parseInt(Integer.java:415)
at java.lang.Integer.parseInt(Integer.java:497)
at MyInput.readInt(MyInput.java:32)
at Driver.main(Driver.java:6)
Java Result: 1
BUILD SUCCESSFUL (total time: 0 seconds)
I REALLY appreciate your help. Im a n00b by definition, but would really like to get into the java community. I have minimal C++ knowledge. anyway, Thanks for looking over all of this n00bish garbage.

Exception in thread "main" java.lang.NumberFormatException: null
at java.lang.Integer.parseInt(Integer.java:415)
at java.lang.Integer.parseInt(Integer.java:497)
at MyInput.readInt(MyInput.java:32)This tells you that there was a NumberFormatException and that the value which was not a number was "null". You can guess what NumberFormatException means, or if you can't possibly imagine then you can look it up in the API documentation.
It also tells you that it was caused by line 32 of your MyInputClass (the last line of the stack trace) and that you were calling Integer.parseInt in that line (the line just above that).
Your thousand lines of code are all very well but I don't know which one of them is line 32. Your text editor should be able to tell you that. Find out why that line of code is passing null to Integer.parseInt.

Help with input output .txt files!

Hi i'm a student and totally new to programming. I need the program to read a .txt file and then output it:
import java.io.*;
import java.util.*;
public class Reading{
     public static void main(String[] args)throws Exception{
          Scanner scanner = new Scanner(new File(args[0]));
          while(scanner.hasNext()){
               System.out.println(scanner.next());
          scanner.close();
and
import java.io.*;
public class Writing{
     public static void main(String[] args)throws Exception{
          String outputFile = args[0];
          PrintWriter writer = new PrintWriter(new BufferedWriter(new FileWriter(outputFile)));
          for(int i = 0; i < 100; i++){
               writer.println(i * i);
          writer.close();
How would i merge these together? I also changed the command line to java Reading Input.txt but it wont run on DrJava on my computer or laptop and i get an error? How do i then store the strings into an arraylist and iterate throught the arraylist to reverse the strings?
Please help.

You could do this...
import java.io.*;
import java.util.*;
public class FileIO2
     public static void main(String argsp[])
          String readfile="ajr.txt";
          String writefile="ajr2.txt";
          try{
          read(readfile);
          write(writefile);
          catch(Exception e)
          {e.printStackTrace();}
     public static void read(String filename) throws Exception
          Scanner scanner = new Scanner(new File(filename));
          while(scanner.hasNext()){
               System.out.println(scanner.next());
          scanner.close();
     public static void write(String filename) throws Exception
          String outputFile = filename;
          PrintWriter writer = new PrintWriter(new BufferedWriter(new FileWriter(outputFile)));
          for(int i = 0; i < 100; i++){
               writer.println(i * i);
          writer.close();
}

Need help with PreSonus Firebox, MIDI, and inputs and outputs

Hey everybody, I'm new, and I just recently got Logic Pro 8 and a PreSonus Firebox. I have had no trouble with recording MIDI in Logic, but I have had problems with recording audio devices, like a guitar or a bass.
When I record MIDI, I hear it perfectly through the speakers on the Mac, and it records just fine. But the guitar won't come through. I have tried changing the core audio device to "PreSonus Firebox," in which case I still can't hear the guitar, but it records. Once it's been changed to this device, I can't hear anything else I've recorded either, like the MIDI. Once I've changed it back to "Built in input," I can hear everything, including the recorded guitar.
So the problem is, why can't I make Firebox my input, and my computer the output, so I can play through the Firebox and hear it on the computer?
Here is how everything is laid out: I have a Casio keyboard connected by MIDI through the Firebox, which is connected to my Macbook Pro through FireWire. There is also a guitar plugged into the Firebox. Please help, I'm really excited to start recording!

sorry I'm not getting a few things....
1) how do I create a midi object?
you create the midi object in the midi inst layer of your environment. at the top left under the menu that says "new" select the very 1st thing in the list, "instrument" (midi instrument)
2) where do I assign the midi output?
after you create the instrument the perameters box opens on the left. you assign the port and channel there
5) where are the audio outs?
to what? the roland? doesn't it have audio output?
I've been reading the manual and have tried various
forums.... been trying to get this since last
night.... my brain. I know it's gotta be simple...
not real simple but not real hard either

OO ALV - No Output, Please help

hello all...
in this alv.. i used the static call instead of creating a custom container.
i couldn't get the output. please help.
<code part too large, removed by moderator, please stay below 5000 characters, counting each single one ;)>
Edited by: Thomas Zloch on Feb 9, 2011 1:23 PM

re submission of the code from fieldcatalog to the method call for better clarity of view.
dgw_it_fieldcatalog-fieldname = 'VBELN'.
dgw_it_fieldcatalog-col_pos = 1.
dgw_it_fieldcatalog-outputlen = 20.
dgw_it_fieldcatalog-emphasize = 'X'.
APPEND dgw_it_fieldcatalog TO dgmst_it_fieldcatalog.
CLEAR dgw_it_fieldcatalog.
dgw_it_fieldcatalog-fieldname = 'ERNAM'.
dgw_it_fieldcatalog-col_pos = 1.
dgw_it_fieldcatalog-outputlen = 20.
dgw_it_fieldcatalog-emphasize = 'X'.
APPEND dgw_it_fieldcatalog TO dgmst_it_fieldcatalog.
CLEAR dgw_it_fieldcatalog.
dgw_it_fieldcatalog-fieldname = 'ERDAT'.
dgw_it_fieldcatalog-col_pos = 2.
dgw_it_fieldcatalog-outputlen = 10.
dgw_it_fieldcatalog-emphasize = 'X'.
APPEND dgw_it_fieldcatalog TO dgmst_it_fieldcatalog.
CLEAR dgw_it_fieldcatalog.
dgw_it_fieldcatalog-fieldname = 'POSNR'.
dgw_it_fieldcatalog-col_pos = 3.
dgw_it_fieldcatalog-just = 'L'.
dgw_it_fieldcatalog-outputlen = 10.
dgw_it_fieldcatalog-emphasize = 'X'.
APPEND dgw_it_fieldcatalog TO dgmst_it_fieldcatalog.
CLEAR dgw_it_fieldcatalog.
dgw_it_fieldcatalog-fieldname = 'MATNR'.
dgw_it_fieldcatalog-col_pos = 4.
dgw_it_fieldcatalog-outputlen = 15.
dgw_it_fieldcatalog-emphasize = 'X'.
APPEND dgw_it_fieldcatalog TO dgmst_it_fieldcatalog.
CLEAR dgw_it_fieldcatalog.
dgw_it_fieldcatalog-fieldname = 'MAKTX'.
dgw_it_fieldcatalog-col_pos = 5.
dgw_it_fieldcatalog-outputlen = 40.
dgw_it_fieldcatalog-emphasize = 'X'.
APPEND dgw_it_fieldcatalog TO dgmst_it_fieldcatalog.
CLEAR dgw_it_fieldcatalog.
CREATE OBJECT r_grid
EXPORTING
*    i_shellstyle      = 0
*    i_lifetime        =
     i_parent          = cl_gui_custom_container=>screen0.
*    i_appl_events     = space
*    i_parentdbg       =
*    i_applogparent    =
*    i_graphicsparent =
*     i_name            =
*    i_fcat_complete   = space
* EXCEPTIONS
*    error_cntl_create = 1
*    error_cntl_init   = 2
*    error_cntl_link   = 3
*    error_dp_create   = 4
*    others            = 5
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL METHOD r_grid->set_table_for_first_display
*   EXPORTING
*    i_buffer_active               =
*    i_bypassing_buffer            =
*    i_consistency_check           =
*    i_structure_name              =
*    is_variant                    =
*    i_save                        =
*    i_default                     = 'X'
*    is_layout                     =
*    is_print                      =
*    it_special_groups             =
*    it_toolbar_excluding          =
*    it_hyperlink                  =
*    it_alv_graphics               =
*    it_except_qinfo               =
*    ir_salv_adapter               =
CHANGING
     it_outtab                     = dgmst_order
     it_fieldcatalog               = dgmst_it_fieldcatalog
*    it_sort                       =
*    it_filter                     =
* EXCEPTIONS
*    invalid_parameter_combination = 1
*    program_error                 = 2
*    too_many_lines                = 3
*    others                        = 4
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

≥≤ Symbols output in different sizes. Please help!

Working in Quark Xpress 9.5.1, on OS 10.8.4 using Font Agent Pro 5.028...
I am having difficulty with the the font Helvetica Condensed. Sometimes the greater than/equal (≥) or less than/equal signs (≤) are different sizes. We have three different macs all set up with same software/versions and using the same font library. Each one is outputting differently. We have struggled with this same issue through various OS and various versions of Quark and Font Agent Pro.
I am not very knowledgeable about all of the things that can go wrong with fonts - and I just don't know how to get to the source of our issue.
This happens using both Adobe and Allied Fonts.
Please help!

The usual problem is that at print time, your printer does not have the exact font available, and substitutes a different font that it thinks should be comparable. The letters sometimes work, but special symbols are rarely the same in all aspects in different fonts.
If there is a Printer option to do so, tell it not to do any Font substitution.

Please help! - No Input No Output

Similar Messages

Maybe you are looking for