Please HELP!  Notifyd is causing MBP to run hot

HI,
My Mac Book Pro 2011 OS X latest update, started running hot.  if I force stop the notifyd it cools off.   I'm not sure what is causing this.  I have dont a re-install of the OS.  Not sure what else to try.  Any suggestions?

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" '/S*/*/Ca*/*xpc* >&- ||echo No' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors XPC\ cache );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 50 32 52;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return  three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Similar Messages

  • Please help: Mouse cursor on MBP repeatedly freezing for a few seconds

    Hi all
    I bought a MBP last week, and today I started experiencing problems with the mouse cursor. No matter whether I'm using the trackpad or an external mouse (I've tried using both a wired Mighty Mouse and a wireless Logitech), when I'm moving the cursor it keeps freezing for a few seconds (perhaps less than a second), and then I "regain" control of it, only for it to freeze again after a short while.
    The only thing that I can think of that might have something to do with this is that I replaced the 2GB of Apple RAM with 4GB of OWC RAM a couple of days ago. Can this be the reason?
    Please help me, as this problem renders the computer impossible to use:(
    Thanks in advance
    Daniel
    PS: I'm running Mac OS 10.5.1 and I've got the Keyboard Freeze Update Installed.

    Hi.
    I have a similar problem, however I realized it is somehow related to weather the airport is on. If I turn it off, there are no freezes. It is weird, and I'm going to go with it to Apple.

  • PLEASE HELP!! HOW DO I RUN A .EXE APPLICATION INSIDE A BROWSER!!

    hello everyone,
    i Run a website, named www.anarchywars.com and basicaly i made a mini game in a program called "Game-Make 6", basicaly when i save it to an .exe its very useful because all it needs to run is that .exe and you can play the game. Basicaly i want to put that game onto my website, the website is a PHP back MYSQL database, and i want this, when someone click "run" to be able to run inside the browser. It isnt a motion picture game, its just text based and has a few images.
    If i could just direct everyone attention to this site http://www.miniclip.com/games/en/
    they have that sort of things with there games, so can someone please help me out here? thank you. For a try of the game, it isnt up yet just to download to get an idea, go here. www.anarchywars.com/game.exe
    download and have a look!
    Thank you very much!
    Regards
    Jesse
    P.S Game Make 6 can be downloaded for free, by going here http://www.gamemaker.nl/

    the manifest file was used, and the jar file runs fine
    if I use the java command. I just can't get it to run
    with the jre.exe file. Any other ideas.The jre command is only for programs developed under the 1.1 platform. For programs developed with the 1.2 platform and higher we use the java command with the -jar option. And judging from the Java Tutorial lesson on Jar files, these commands are not interchaengable.
    Judging from the topic of your question, it seems to me that you think that the JRE does not contain the java command. It does if it is version 1.2 or higher.

  • Please help!! how to compile/run  Swing

    Hi all! please tell me how can I compile and run Swing classes in
    Forte.
    I have a window frame (WindowA class)that calls another window frame(windowB class)
    They are stored in the same directory but saved with different name.
    Please help..
    thanks in advance

    oh i just read your other post. you can call another class simply by
    just writing
    newClass x = new newClass();
    or just :
    new newClass();
    works i think :)
    put that line in the actionPerformed method,
    and if newClass() has a frame, it'll come up in a new window.
    You did handle the button with an ActionListener right?

  • Do the new MBPs still run hot?

    I have a first generation MBP. It runs really, really hot. Are the new ones just announced any better?

    Well so far, I haven't heard nothing about running hot I actually heard from a friend that they run cooler than previous versions, I'm waiting for mine to be shipped from apple, but your best bet would be to do a search around the boards, and see what you come up with.

  • Please Help: no internet on MBP (10.8.3) via iPhone 5 (6.1.4) personal hotspot, usb or bluetooth

    Hello all,
    I used to be able to get Internet on my MBP (mid 2009 13, OSX 10.8.3) through iPhone 5 (ios 6.1.4) using either USB or bluetooth. Now, the personal hotspot LINK between my MBP and Iphone via bluetooth is ACTIVE (the blue bar says there's a connection), but there's NO INTERNET CONNECTION. USB tethering doesn't work at all (no blue bar).
    Because the personal hotpot still works between my iPhone 5 and iPad 2, I suspect that the problem is with my mac. I've tried re-pairing my Mac and the phone a couple of times. I've reset iPhone network settings. Nothing I tried helped. Can someone help please?
    Thanks, Shiang

    I was asking whether you could tether via Wi-Fi. I take it that you can't.
    Run the Network Diagnostics assistant. How far do you get?

  • Please help - Problem with loading swf's (running very slowly)

    Hi
    I have posted this problem up in the last few days so I built a quick demo of my problem. Can somebody please download it and take a look at it and see what I'm doing wrong?
    You can download it here at:
    http://www.bounceworld.ie/download/Demo_Test.zip
    The external swf's when loaded.....run very very slow; sometimes unresponsive as if there is a script running in the background. I'm using keyboard commands to navigate through the screens - eg:
    on (keyPress "<Space>") {
    gotoAndStop("scene02", "firstframeLabel");
    Thank you for your help!!!!

    Hi
    I'm trying to use Key Listeners to solve my problem.
    I don't know much about key liseners so can somebody help me out.
    I have the following on a keyframe yet it still wont jump to the certain frames when I press the relevent keys. Am I missing something?
    stop();
    KeyListener = new Object();
    KeyListener.onKeyDown = function() {
    if (Key.getAscii() == 38) {  // UP key
    gotoAndStop(89);}
    if (Key.getAscii() == 40) {  // DOWN key
    gotoAndStop(91);}
    if (Key.getAscii() == 37)  // LEFT key
    gotoAndStop(88);}
    if (Key.getAscii() == 32) {  // SPACEBAR key
    loadMovie("application_01.swf", "container");}

  • Please help me choose a netbook for running arch

    I'm looking for a 10-12" netbook with a long battery life. Currently I'm considering Samsung N140, N150, N210 and NC10. I like the look of N150 but I don't know how well will it run Arch. I'm also considering MSI Wind u160, but the awful gloss of the body scares me off.
    At first I was very sure I'll pick Benq u121, but the I found out that Intel GMA 500 has very poor support.
    Could anyone share his experience with Arch on netbooks with nice battery life? I'm talking about battery life of 6+ hours.

    To avoid multiple threads on the same subject, please continue here: Best Netbook?
    Closing this one.

  • Please help - trouble getting any applet to run with Mozilla or IE?

    Hello,
    I am using Mozilla Firebird and MS IE 6 under WinXP Pro. I have installed JRE 1.4.2 and ensured that java is enabled in both browsers. But no matter what I do, no applet will run, at all. No classes are loaded, I just get an empty "resource not found" box. I must have installed the JRE 4 times now, and the process seems to finish flawlessly. Any ideas? Do I have to patch my windows? I would really like to test some java on this pc!!!!!!
    Thanks.

    I am using Mozilla Firebird and MS IE 6 under WinXP
    Pro. I have installed JRE 1.4.2 and ensured that java
    is enabled in both browsers. But no matter what I do,
    no applet will run, at all. No classes are loaded, I
    just get an empty "resource not found" box. I must
    have installed the JRE 4 times now, and the process
    seems to finish flawlessly. Any ideas? Do I have to
    patch my windows? I would really like to test some
    java on this pc!!!!!!Hi,
    this combination works fine for me!
    For Firebird check the Plugins Subdir or just write "abaout:plugins" the address field and hit enter. It should show you all plugins avail in Firebird.
    Enable the java console (not JavaScript!!) in the Java(TM) Plugin settings.
    Than a window whill show you "the work" of the Java Plugin.
    Hope this helps

  • Please Help! What causes JTable to shrink w/in JScrollPane?

    I've looked everywhere for the answer for this, and lots of people have the same problem, but it never seems to get answered.
    I have a JTable (3 columns) in a JScrollPane.
    printerTable.setModel(data, colNames)
    scrollPane = new JScrollPane(printerTable, JScrollPane.VERTICAL_SCROLLBAR_AS_NEEDED, JScrollPane.HORIZONTAL_SCROLLBAR_NEVER); Initially, the columns fill the entire width of the scrollpane. But when I refresh the data, the columns shrink and a white space is left on the far right side. What do I need to do to get the columns to always span the width of the scrollpane? Do I have to fire events?
    I've tried all sorts of things, including...
    printerTable.setPreferredScrollableViewportSize(printerTable.getPreferredSize());
    printerTable.sizeColumnsToFit(-1)and I've tried setting preferred, min and max widths. Is there some order you have to put them in?
    This is soooo frustrating...I've spent days trying to get this right and I haven't accomplished anything.

    Thanks for trying to help guys! Actually I think I've finally gotten it to work! What a relief!
    I figured I post it, since I've seen lots of posts from people having the same problem...
    I created my own class that extended JTable and overrode the getScrollableTracksViewportWidth() to return true (I was only going to have 3 columns, not any more).
    The other things that I had to do were:
    queueTable.setAutoCreateColumnsFromModel(false);
    queueTable.setPreferredScrollableViewportSize(new Dimension(200, 150)); //w x h
    queueTable.setAutoResizeMode(MyJTable.AUTO_RESIZE_OFF);Plus, I removed the following that I had put in previously:
    //queueTable.setPreferredSize(new Dimension(290,900));
    //queueTable.setPreferredScrollableViewportSize(queueTable.getPreferredSize());I also didn't need to set the min, max, & preferred column widths or the preferred size of the table.

  • Please help -- Why the applet doesn't run with jre1.4.1_01?

    Hi,
    I have an applet embedded in a remote-server page. It can be loading from the server and running in the local computer with Jre1.3.1. After I uninstalled jre1.3.1 and installed JRE1.4.1_01. My applet doesn't run. Here is the message from Java Consol:
    java.lang.NullPointerException
    at sun.plugin.cache.CachedFileLoader.writeHeaders(Unknown Source)
    at sun.plugin.cache.CachedFileLoader.createCacheFiles(Unknown Source)
    at sun.plugin.cache.CachedFileLoader.access$200(Unknown Source)
    at sun.plugin.cache.CachedFileLoader$3.run(Unknown Source)
    at java.security.AccessController.doPrivileged(Native Method)
    at sun.plugin.cache.Cache.privileged(Unknown Source)
    at sun.plugin.cache.CachedFileLoader.download(Unknown Source)
    at sun.plugin.cache.CachedFileLoader.load(Unknown Source)
    at sun.plugin.cache.FileCache.get(Unknown Source)
    at sun.plugin.net.protocol.http.HttpURLConnection.connectWithCache(Unknown Source)
    at sun.plugin.net.protocol.http.HttpURLConnection.connect(Unknown Source)
    at sun.plugin.net.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
    at sun.net.www.protocol.http.HttpURLConnection.getHeaderField(HttpURLConnection.java:1197)
    at java.net.HttpURLConnection.getResponseCode(HttpURLConnection.java:247)
    at sun.applet.AppletClassLoader.getBytes(AppletClassLoader.java:250)
    at sun.applet.AppletClassLoader.access$100(AppletClassLoader.java:42)
    at sun.applet.AppletClassLoader$1.run(AppletClassLoader.java:143)
    at java.security.AccessController.doPrivileged(Native Method)
    at sun.applet.AppletClassLoader.findClass(AppletClassLoader.java:140)
    at sun.plugin.security.PluginClassLoader.findClass(Unknown Source)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:299)
    at sun.applet.AppletClassLoader.loadClass(AppletClassLoader.java:114)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:255)
    at sun.applet.AppletClassLoader.loadCode(AppletClassLoader.java:501)
    at sun.applet.AppletPanel.createApplet(AppletPanel.java:566)
    at sun.plugin.AppletViewer.createApplet(Unknown Source)
    at sun.applet.AppletPanel.runLoader(AppletPanel.java:495)
    at sun.applet.AppletPanel.run(AppletPanel.java:292)
    at java.lang.Thread.run(Thread.java:536)
    I copy the my html file which has this applet built-in to my local computer. The webpage can be openned and the applet running fine even with jre1.4.1. Why it didn't run with Jre1.4.1 and it did run with jre 1.3.1 when loading remotely? Could someone tell me what the above messages mean? Is this a bug from Jre1.4.1_01?
    I have running server at 206.29.25.29. and select "read sensor". Jre1.4.1_01 will not let the applet run, but jre1.3.1 does.
    Is there any body know about this issue?
    Thanks,
    Kunlun

    In fact, I have run many tests and the only failures are when the plugin is 1.4.2 and the app server is on Unix:
    Build      Deploy      Build JDK     PlugIn JDK     App Server JDK     Result
    Win     Win     1.4.2_02     1.4.2          1.4.2          Success
    Win     Win     1.4.2          1.4.2          1.4.2          Success
    Win     Win     1.4.1_02     1.4.2          1.4.2          Success
    Win     Win     1.4.2          1.4.0          1.4.2          Success
    Win     Win     1.4.2          1.4.1          1.4.2          Success
    Win     Win     1.4.2          1.4.2          1.4.2          Success
    Unix     Win     1.4.2          1.4.2          1.4.2          Success
    Unix     Win     1.4.2          1.4.2          1.4.1_02     Success
    Unix     Win     1.4.2          1.4.2          1.4.0          Success
    Unix     Unix     1.4.2          1.4.0          1.4.0          Success
    Unix     Unix     1.4.2          1.4.1          1.4.0          Success
    Unix     Unix     1.4.2          1.4.2          1.4.0          Failure
    Win     Unix     1.4.2          1.4.0          1.4.0          Success
    Win     Unix     1.4.2          1.4.1          1.4.0          Success
    Win     Unix     1.4.2          1.4.2          1.4.0          Failure

  • (PLEASE HELP) Ipod saying application is being run while trying to reset?

    I had my ipod little over 2 years and now it will only charge!!!
    the songs dont play at all on my ipod and it makes a weird sound when it wants to play then after a while of skipping songs it wont play and just freezes..
    When i come to restoring the setings on the computor it just says that it is being used by another application and wont allow me to restore..
    any suggestions?
    would be much appreciated x

    Do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
    Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
    It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    You can skip the step to create a new profile, that is not necessary for this issue.
    See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • Please Help -- Why is my MBP Retina '12 crashing?

    Here is the most recent report:
    Interval Since Last Panic Report:  69965 sec
    Panics Since Last Report:          1
    Anonymous UUID:                    C050F7FC-2779-E8CE-47E9-BBAEC10B886C
    Mon Oct  7 13:50:53 2013
    panic(cpu 7 caller 0xffffff802aef7ab2): "vnode_rele_ext: vp 0xffffff805046ef80 usecount -ve : -1.  v_tag = 16, v_type = 1, v_flag = 84800."@/SourceCache/xnu/xnu-2050.48.12/bsd/vfs/vfs_subr.c:1788
    Backtrace (CPU 7), Frame : Return Address
    0xffffff8152d9bab0 : 0xffffff802ae1d636
    0xffffff8152d9bb20 : 0xffffff802aef7ab2
    0xffffff8152d9bb60 : 0xffffff802af105b0
    0xffffff8152d9bb90 : 0xffffff802af02f22
    0xffffff8152d9bc40 : 0xffffff802af03394
    0xffffff8152d9bf50 : 0xffffff802b1e97ba
    0xffffff8152d9bfb0 : 0xffffff802aecf453
    BSD process name corresponding to current thread: mds
    Mac OS version:
    12F45
    Kernel version:
    Darwin Kernel Version 12.5.0: Sun Sep 29 13:33:47 PDT 2013; root:xnu-2050.48.12~1/RELEASE_X86_64
    Kernel UUID: EA38B02E-2B88-309F-BA68-1DE29F605DD8
    Kernel slide:     0x000000002ac00000
    Kernel text base: 0xffffff802ae00000
    System model name: MacBookPro10,1 (Mac-C3EC7CD22292981F)
    System uptime in nanoseconds: 67409780818816
    last loaded kext at 54712773151250: com.apple.iokit.SCSITaskUserClient          3.5.6 (addr 0xffffff7fad2e0000, size 36864)
    last unloaded kext at 54781508208819: com.apple.driver.AppleUSBCDC          4.1.23 (addr 0xffffff7fad296000, size 12288)
    loaded kexts:
    com.bresink.driver.BRESINKx86Monitoring          9.0
    com.sophos.kext.sav          9.0.3
    com.sophos.nke.swi          9.0.3
    com.apple.iokit.IOUSBAttachedSCSI          1.0.4
    com.apple.iokit.AppleBCM5701Ethernet          3.6.2b4
    com.apple.filesystems.smbfs          1.8.4
    com.apple.driver.AppleHWSensor          1.9.5d0
    com.apple.driver.AudioAUUC          1.60
    com.apple.iokit.IOBluetoothSerialManager          4.1.7f2
    com.apple.filesystems.autofs          3.0
    com.apple.driver.ApplePlatformEnabler          2.0.7d2
    com.apple.driver.AGPM          100.13.12
    com.apple.driver.X86PlatformShim          1.0.0
    com.apple.driver.AppleMikeyHIDDriver          124
    com.apple.GeForce          8.1.6
    com.apple.iokit.IOUserEthernet          1.0.0d1
    com.apple.driver.AppleHDA          2.4.7fc4
    com.apple.driver.AppleMikeyDriver          2.4.7fc4
    com.apple.driver.AppleUpstreamUserClient          3.5.12
    com.apple.Dont_Steal_Mac_OS_X          7.0.0
    com.apple.driver.AppleSMBusPCI          1.0.11d1
    com.apple.driver.AppleSMCPDRC          1.0.0
    com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport          4.1.7f4
    com.apple.driver.AppleSMCLMU          2.0.3d0
    com.apple.driver.AppleLPC          1.6.3
    com.apple.driver.ApplePolicyControl          3.4.5
    com.apple.driver.AppleIntelHD4000Graphics          8.1.6
    com.apple.driver.AppleIntelFramebufferCapri          8.1.6
    com.apple.driver.AppleMuxControl          3.4.5
    com.apple.driver.AppleMCCSControl          1.1.11
    com.apple.driver.AppleUSBTCButtons          237.1
    com.apple.driver.AppleUSBTCKeyboard          237.1
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
    com.apple.BootCache          34
    com.apple.driver.XsanFilter          404
    com.apple.iokit.IOAHCIBlockStorage          2.3.5
    com.apple.driver.AppleUSBHub          635.4.0
    com.apple.driver.AppleSDXC          1.4.3
    com.apple.driver.AirPort.Brcm4331          615.20.17
    com.apple.driver.AppleAHCIPort          2.6.6
    com.apple.driver.AppleUSBEHCI          621.4.6
    com.apple.driver.AppleUSBXHCI          635.4.0
    com.apple.driver.AppleSmartBatteryManager          161.0.0
    com.apple.driver.AppleACPIButtons          1.8
    com.apple.driver.AppleRTC          1.5
    com.apple.driver.AppleHPET          1.8
    com.apple.driver.AppleSMBIOS          1.9
    com.apple.driver.AppleACPIEC          1.8
    com.apple.driver.AppleAPIC          1.7
    com.apple.driver.AppleIntelCPUPowerManagementClient          214.0.0
    com.apple.nke.applicationfirewall          4.0.39
    com.apple.security.quarantine          2.1
    com.apple.driver.AppleIntelCPUPowerManagement          214.0.0
    com.apple.iokit.IOSCSIBlockCommandsDevice          3.5.6
    com.apple.iokit.IOEthernetAVBController          1.0.2b1
    com.apple.driver.AppleThunderboltPCIUpAdapter          1.3.2
    com.apple.iokit.IOSerialFamily          10.0.6
    com.apple.kext.triggers          1.0
    com.apple.nvidia.gk100hal          8.1.6
    com.apple.NVDAResman          8.1.6
    com.apple.driver.DspFuncLib          2.4.7fc4
    com.apple.iokit.IOAudioFamily          1.9.2fc7
    com.apple.kext.OSvKernDSPLib          1.12
    com.apple.iokit.IOSurface          86.0.4
    com.apple.iokit.IOBluetoothFamily          4.1.7f2
    com.apple.driver.X86PlatformPlugin          1.0.0
    com.apple.iokit.IOBluetoothHostControllerUSBTransport          4.1.7f2
    com.apple.driver.AppleSMC          3.1.5d4
    com.apple.driver.IOPlatformPluginFamily          5.4.1d13
    com.apple.driver.AppleHDAController          2.4.7fc4
    com.apple.iokit.IOHDAFamily          2.4.7fc4
    com.apple.iokit.IOAcceleratorFamily          74.15
    com.apple.driver.AppleGraphicsControl          3.4.5
    com.apple.driver.AppleBacklightExpert          1.0.4
    com.apple.iokit.IONDRVSupport          2.3.7
    com.apple.driver.AppleSMBusController          1.0.11d1
    com.apple.iokit.IOGraphicsFamily          2.3.7
    com.apple.driver.AppleUSBMultitouch          237.3
    com.apple.iokit.IOUSBHIDDriver          623.4.0
    com.apple.iokit.IOSCSIArchitectureModelFamily          3.5.6
    com.apple.driver.AppleThunderboltDPInAdapter          2.5.0
    com.apple.driver.AppleThunderboltDPAdapterFamily          2.5.0
    com.apple.driver.AppleThunderboltPCIDownAdapter          1.3.2
    com.apple.driver.AppleUSBMergeNub          621.4.6
    com.apple.driver.AppleUSBComposite          621.4.0
    com.apple.driver.AppleThunderboltNHI          1.9.2
    com.apple.iokit.IOThunderboltFamily          2.7.7
    com.apple.iokit.IO80211Family          530.5
    com.apple.iokit.IONetworkingFamily          3.0
    com.apple.iokit.IOUSBUserClient          630.4.4
    com.apple.iokit.IOAHCIFamily          2.5.1
    com.apple.iokit.IOUSBFamily          635.4.0
    com.apple.driver.AppleEFINVRAM          2.0
    com.apple.driver.AppleEFIRuntime          2.0
    com.apple.iokit.IOHIDFamily          1.8.1
    com.apple.iokit.IOSMBusFamily          1.1
    com.apple.security.sandbox          220.3
    com.apple.kext.AppleMatch          1.0.0d1
    com.apple.security.TMSafetyNet          7
    com.apple.driver.DiskImages          345
    com.apple.iokit.IOStorageFamily          1.8
    com.apple.driver.AppleKeyStore          28.21
    com.apple.driver.AppleACPIPlatform          1.8
    com.apple.iokit.IOPCIFamily          2.8
    com.apple.iokit.IOACPIFamily          1.4
    com.apple.kec.corecrypto          1.0
    Model: MacBookPro10,1, BootROM MBP101.00EE.B03, 4 processors, Intel Core i7, 2.3 GHz, 8 GB, SMC 2.3f36
    Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-In, 512 MB
    Graphics: NVIDIA GeForce GT 650M, NVIDIA GeForce GT 650M, PCIe, 1024 MB
    Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54333531533642465238432D50422020
    Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54333531533642465238432D50422020
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xEF), Broadcom BCM43xx 1.0 (5.106.98.100.17)
    Bluetooth: Version 4.1.7f2 12718, 3 service, 13 devices, 3 incoming serial ports
    Network Service: Thunderbolt Ethernet, Ethernet, en2
    PCI Card: Apple 57762-A0, sppci_ethernet, Thunderbolt@10,0,0
    Serial ATA Device: APPLE SSD SM256E, 251 GB
    USB Device: hub_device, 0x8087  (Intel Corporation), 0x0024, 0x1a100000 / 2
    USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8510, 0x1a110000 / 3
    USB Device: hub_device, 0x8087  (Intel Corporation), 0x0024, 0x1d100000 / 2
    USB Device: hub_device, 0x0424  (SMSC), 0x2512, 0x1d180000 / 3
    USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0262, 0x1d182000 / 5
    USB Device: BRCM20702 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0x1d181000 / 4
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8286, 0x1d181300 / 7

    Disconnect all peripherals from your computer.  Repair permissions and restart your computer.  If this works, one of your peripherals is the culprit. Otherwise, you should post in the iPhoto forum area in case your issue is software related rather than the Macbook Pro.

  • Re: HTC Rezound update has shortened battery life and causing device to run hot anyone having issues?

    budone pointed me in the right direction but I think tidbits pushed him off with apps and clearing cache. Battery app definitely showed me what the issue was.
    Battery monitor and phone built in monitor shows phone call usage above 25%. I don't use my phone for hours a day (320 minutes / 4 = 80 minutes talk time). So why is my phone polling Verizon towers so often? Issue also prevented phone from sleeping correctly. So, SIM/firmware conflict. The update pushed a radio setting in the phone to a CDMA + LTE/EvDO auto which was to correct the SIM/reboot issue.
    Thread detailing boot loop issue and fix, forum.xda-developers.com/showthread.php
    My phone was already set to a correct radio setting prior to the update. When the update was pushed I had my phone in 3G/CMDA to maintain the battery. This update forced a setting and restarted phone and caused a SIM/firmware conflict. Now my phone will go into a boot loop when it drains below 20% and in CDMA(3G). 4G LTE it will run fine. Why? Still attempting to isolate that. I don't think I can unless I have developer access and root the phone. I will not be doing this knowing that there is a manufacturer/carrier defect on my device and they are on the chain for it's repair at the moment. Software, phones firmware agree that it is a CDMA + LTE/EvDO device but SIM has to be removed, phone booted without, TURN OFF, reseat SIM and power on to fix boot loop after charging for a while every day so far. Verizon why am I troubleshooting an issue that your techs should have figured out before pushing a manufacture update? I am paying for Verizon service because it's better than Sprint and AT&T but not cheaper in my area! Where is the Verizon rep with assistance?

    Could be something with the new verizon location service that was introduced with the update.  So far, I haven't heard exactly what it does, but if it is polling the towers for your location, that could be the issue.  Personally, I haven't had any problems since the update, if it wasn't for the extra signal bar, I probably wouldn't even notice.  However, the battery over heating is a common problem with the Rezound and, from what I hear, Verizon is being pretty good about replacing batteries for anyone having an issue.
    For your reference:
    http://forum.xda-developers.com/showthread.php?t=1460494
    and
    http://forum.xda-developers.com/showthread.php?t=1468704

  • MBP 13" runs hot after I installed Lion

    By normal usage just browsing the web, the fan runs loudly and the laptop runs very hot. Any idea what to do?

    I'm having the same problem. Hopefully someone has some answers...

Maybe you are looking for

  • FCC processing parameter issues

    I have some probs with FCC. I am now getting output in exactly the desired format. Am using append in FCC as processing mode. I want to remove the wrong data in the folder. I am using NFS. I don't see the delete option in receiver file adapter FCC pr

  • Using php-mysql module and Apache2.2 provided with FMS4.5

    Hi, we've recently downloaded and upgraded FMS from 3 to 4.5 on a server that has this configuration (before upgrading): - Centos 5.5 - Apache 2.2.3 - mysql 5.0.77 - php 5.3.3 - perl 5.8.8 Everything was fined before upgrading since 3 years. We decid

  • Payment Sytem Unavailable

    I'm trying to purchase a monthly PS subscription after letting my previous expire.  When I get to purchase now page and click on Purchase button it says that "payment system unavailable" and to try back.  I've tried for multiple days now, facing a de

  • Disappearing canvas

    I have three canvases on my form :- Canvas A is a content canvas Canvas B is a tab canvas Canvas C is a stacked canvas When i move focus from canvas C to canvas B, canvas C disappears. What could be causing this disappearance? Please assist. Edited b

  • How to reduce buffer gets

    Dear All, My query is taking 575,618,610, executions 86,114 and CPU Time is 3982.59s which i found in the statspack report. Then i checked the query to tune, but it's execution plan is showing only CPU cost 5. So, what is the problem and what is the