Please help!!!!! on non blocking io

How can I use non blocking IO on client side? is it possible with BufferedReader(new InputStreamReader) on read????
pl. hjelp me, it's urgetn.. :(
Thanx in advance

FoxyLady No, it's Client/Server environment

Similar Messages

To all of my friends in fb: please help me in blocking my stolen Ipad3 SN: DY******VD1 thanks so much, I would greatly appreciate if culprit would learn his lesson!

To all of my friends in fb: please help me in blocking my stolen Ipad3 SN: DY*****VD1 thanks so much, I would greatly appreciate if culprit would learn his lesson!
<Edited by Host>

Apple does not track nor block iPads. If it was equipped to access
cellular, report it to your cellular provider. Report the loss to your
local police. If covered by your insurance, report to your insurance
company.
Immediately change all of your passwords.
If you had previously set it up, you may be able to track it via
Find my iPhone.
Texas Mac Man has some excellent links in this thread:
https://discussions.apple.com/thread/4869627?tstart=270
Message was edited by: imobl added link to Texas Mac Man post

Does anyone know something about a promorewards.prizeswood.eu pop up box (suppose a virus) on chromium? please help everything is blocked on my macbook air

does anyone know something about a promorewards.prizeswood.eu pop up box (suppose a virus) on chromium? please help everything is blocked on my macbook air

This may be due to adware called GoPhoto.it, which there was a sudden increase in reports about last week. Try the removal instructions here:
http://www.thesafemac.com/arg-gophotoit/
If you don't find any parts of GoPhoto.it installed, try going through my Adware Removal Guide from the beginning.

Please help, has been blocked for your account temporarily

Please help, has been blocked for your account temporarily

Hey @kat54 ,
Welcome to the HP Forums!
I understand you're receiving an error stating "This program has been blocked for your protection."
You can read about this error here: "Blocked", "User Account Control", "Not trusted", or "Return code: 1625" message in Windows.
You will find a link for Printers here which directs you to the HP Update Software Utility to resolve the problem. When you install this utility ensure you select version 5.005.002.002 or later.
Make sure the utility you've downloaded is for your exact product and operating system.
If this does not resolve the issue please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the following link to get the support number for your region: Phone Assist Worldwide.
Thanks!
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

G505s CPU at 96 degree idle? Please help! Non-stop overheating!

Hello,
I have a Lenovo G505s. While idling the CPU temps run as high as 96 degrees, when I use the laptop cooler (which is practially always) temps stay at about 90. I use this laptop for gaming a lot and just todayI noticed a massive lag in everything I do. Internet isn't an issue, I've run all Lenovo Support scans and everything comes up "fine". Why is it constantly overheating? It literally begins overheating once I turn it on. Is my CPU permanently damaged now? This is a 6 month old laptop cleaned regularly with compressed air, well taken care of..
Thanks in advance.

hi noobtuber,
Welcome to the Lenovo Forums.
Heating issues are commonly caused by dirty fan or a dried out Thermal Interface Material (TIM). Since you keep the computer clean by using compressed air, the problem might be because of the latter (especially if there are no apps running on the background that's eating up the resources).
It's also possible that the heatsink is not properly conducting the heat that the APU is producing, causing the CPU to to throttle (which explains the massive lag that you're experiencing).
You can try to replace the stock Thermal Interface Material with a good quality TIM like Noctua NT-H1, Tuniq TX-4, or Artic Silver 5 and see if the temperature decreases or contact Lenovo for service.
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

HT1349 Someone stole my IPAD. Please help me to blocked all things, even the sim card.

Hi,
I need your help. Someone stole my ipad and i wouldlike you to blocked.
My ID******QL7L
<Personal Information Edited by Host>

Report to police along with serial number. Change all your passwords.
These links may be helpful.
How to Track and Report Stolen iPad
http://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipad
Reporting a lost or stolen Apple product
http://support.apple.com/kb/ht2526
Report Stolen iPad Tips and iPad Theft Prevention
http://www.stolen-property.com/report-stolen-ipad.php
How to recover a lost or stolen iPad
http://ipadhelp.com/ipad-help/how-to-recover-a-lost-or-stolen-ipad/
How to Find a Stolen iPad
http://www.ehow.com/how_7586429_stolen-ipad.html
Apple Product Lost or Stolen
http://sites.google.com/site/appleclubfhs/support/advice-and-articles/lost-or-st olen
Oops! iForgot My New iPad On the Plane; Now What?
http://online.wsj.com/article/SB10001424052702303459004577362194012634000.html
If you don't know your lost/stolen iPad's serial number, use the instructions below. The S/N is also on the iPad's box.
How to Find Your iPad Serial Number
http://www.ipadastic.com/tutorials/how-to-find-your-ipad-serial-number
iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number
http://support.apple.com/kb/HT4061
 Cheers, Tom

Help! None of my apps will open?

Hi
please help. None of apps will open on my
iPhone. All working fine yesterday. This morning
none will open. I've tried reboot.
Any help will be much appreciated.
Cheers

Welcome to the discussions,
try to reset the phone by holding the sleep and home button until you see the Apple logo again. If this does not work, restore your phone.
Restoring: http://support.apple.com/kb/HT1414

ToolTip_Text not working in multi - record block - Please Help!!

Dear Friends & Gurus,
I'm using Forms Version 6.0.8.21.3 (due to many reasons) in C/S mode. Now I have a multi record block in which I am showing the Employee No. My customer's requirement is when I place the mouse on this Emp no., the emp. name must be displayed. I thought of achieving this by ToolTip_text. For this I'm having a Database function which returns the name (as I use this functionality in many forms), in the When-New-Item-Instance block level trigger I'm calling that function with passing the emp code as below
SET_ITEM_PROPERTY(:SYSTEM.CURSOR_ITEM, TOOLTIP_TEXT, FUNC_DIS_EMP_NAME(:SYSTEM.CURSOR_VALUE));But it is working only when I point the mouse in the first record. When I click on 3 or 4 record and then point to the first record, I'm getting the 3 record's name but in the first record.
Please help me - I searched through the forum and I find no accurate answer. It is urgent - please help.
Thank you.
With Kind Regards,
Perumal Senthil Alagu.

Dear Safwan Bhai,
As salaamo alaikum Rahamatulla hi burakathu!!
Actually I'm having a multi record block in which all the emp no., days of attendance, etc will be displayed when I click on the search button. My requirement is when point the mouse over the emp no, the emp name must be displayed as a Tool tip text. My fields are non-editable, so Post-Change is not working. I placed the coding in the When-new-item-instance - in this case the emp name is displayed, but only for the first field, when I move the mouse to second and third fields, the empname of that particulart field is displayed as a tool tip but in the first field only.
Any other suggestions?
Anyway I would appreciate your help.
Thank you.
With Kind Regards,
Perumal Senthil Alagu.

Please HELP! = major disk issue - none of OSX "help" tools works (repair/time machine/reinstall)

Hello to all,
My first post, but directly with a very difficult case I suddenly encountered yesterday evening...
When, as usually I opened the lid, it turned on from sleep, as usually, however frozen suddenly... so I did hard turn off... with ON/OFF button. When it turned on again, I had no possibility to put my password, but I was directly faced with "OSX tools" with 4 options (it is in Polish so I try the translation):
1) Recover from Time Machine back up;
2) Install OSX again;
3) Get online help;
4) Disk tool;
I am totally ****** off how this could happen. There was so much stuff on the disk, including the whole Aperture libary with thousends of my daughter photos (she was born a year ago) - priceless stuff.
I would never expect Apple to give me such an "experience"... never heppened to me on any PC's before..
I have 2011 MacBook Pro 13" with Maverics.
This is what I encountered using each of solutions:
1) I use Synology DS209 for Time Machine backup (connected via Lan cable). As far as I remember backup is about 2 months old. Anyway when I choose this option. OSX tool finds the Time Machine in DiskStation, connects to "MacBook Pro" timemachine on the external disk, BUT cannot find any BACKUP further on!!!! I am lost!
2) second, but not preferred option is OSX reinstallation.After initial analysis, and conditions acceptance, I cannot choose the only disk available. I can see only "recovery disk", but when I click on it, there is a message popping up "This disk is blocked". Obviously this prevents any further activities in reinstallation;
3) Third option is BS clearly, no help at all.
4) Disk tool shows me several disks / I am not an expert, so I am not sure how to understand it (Bold is active, standard non active):
- 320,07 GB Hitach HTS54503...
- Macintosh HD
- Superdrive
- disk1
- OS X Base System
I run "check disk" for Hitachi. No problems. Nothing to repair.
I run "check disk" for Macintosh HD => This disk requires repair. So I run "repair". Quickly I get a message "Disk Tool is unable to repair this disk. Please backup as much data as possible, format the disk and recover the files from backup"..... Really????? How can I backup any files???
DEAR COMMUNITY, please HELP!
What to do in order not to loose any data on one hand and on the other be able to use the computer again?
Please note I do not use "recovery CD" all is running without anything in CD/DVD drive.
Thanks in advance for your answers, competence and experience!
Disk tool does not give any solution, showing

You are in a bad situation, because the internal drive has malfunctioned and your only backup is on a device that is not suitable for use with Time Machine, despite what its manufacturer says.
You must try to make another backup now, before you do anything else. It may or may not be possible.
There are several ways to back up a Mac that is not fully functional. You need an external hard drive to hold the backup data.
1. Boot from the Recovery partition or from a local Time Machine backup volume (option key at startup.) Launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
2. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
3. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.

I am trying to block a maleware site not previously identified by Mozilla. Please help

i have picked up what my research is telling me is maleware. I have ran 4 different kinds of security/maleware elimination programs and NONE seem to be working. I have done a system restore to the point before this started happening and I want to block the site/page from my computer. All I can find is parental controls on Mozilla- It started happening just 4 or 5 days ago, when i boot up my computer it spontaneously opens up to a (empty) web page before I even click on the firefox icon! The site address showing in the window is : https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-prn1/hellocdn.html?v=1
Please Help!

Microsoft has a utility to look at and manage your Startup programs. You can download it here: http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx
Two other ways a web page can open in your default browser at startup would be:
(1) Shortcut to that URL in your startup folder
(2) Scheduled Task set to run at startup
To see whether one of those could be the cause, try making Internet Explorer your default browser before your next Windows shutdown, and see whether the page opens in IE the next time you start up.
This site's malware support article lists a couple of specialized forums at the end. If the problem persists, you may want to post on one of those for step-by-step cleanup advice. See: [[Troubleshoot Firefox issues caused by malware]].

I own a MacBook Pro 2.4 ghz non unibody. I turn on my laptop for ten seconds and it freezes. It boots perfectly and runs for ten seconds until everything freezes. Please help!

I own a MacBook Pro 2.4 ghz non unibody. I turn on my laptop for ten seconds and it freezes. It boots perfectly and runs for ten seconds until everything freezes. Please help!

See if you can boot into single user mode with Command S.

HT2534 when i create the apple ID with the above procedure, i dont see "none" options under credit card selection, please help.

When i create the apple ID with the above procedure, i dont see "none" options under credit card selection, please help.

Apple needs people like you.

My First while loop inside PL/SQL block not working , please help

Hi ,
I am new to PL/sql and struck at PL SQL blocks , please help to solve this .
declare
v_A number constant :=10 ;
j number constant := 3 ;
BEGIN
WHILE j < v_A
LOOP
DBMS_OUTPUT.PUT_LINE('Hai');
END LOOP;
END;
please help as how to resolve this .
Thanks in advance .

btw it's a useful habit to use indentation to highlight the block structure. Also it's worth deciding what your convention will be for keywords (I use uppercase, lowercase is also fine as far as I'm concerned but I've set up my editor to uppercase them) and variables, database object names etc (I use lowercase), e.g:
DECLARE
   v_a CONSTANT PLS_INTEGER := 10;
   j   CONSTANT PLS_INTEGER := 3;
   i PLS_INTEGER := j;
BEGIN
   WHILE i <= v_a LOOP
      DBMS_OUTPUT.PUT_LINE(i);
      i := i +1;
   END LOOP;
END;or perhapsdeclare
   v_a constant pls_integer := 10;
   j   constant pls_integer := 3;
   i pls_integer := j;
begin
   while i <= v_a loop
      dbms_output.put_line(i);
      i := i +1;
   end loop;
end;When I see "declare" and "BEGIN" in the same block of code I worry about the standard of code I'm going to see...

Please help block my ipod touch second generation and forget the code, try putting the code so many times that now says connect to itunes, I connect but will not let me do anything that tells me this should unlock with key and I should do for Please help!

please helpme i block my ipod touch second generation and forget the code, try putting the code so many times that now says connect to itunes, I connect but will not let me do anything that tells me this should unlock with key and I should do for Please help!. thanks

Place the iPOd in recovery mode and then restore. For recovery mode:
iPhone and iPod touch: Unable to update or restore

PLEASE HELP me select new internal hard drive for Macbook Pro 2012 (non-retina)

Good afternoon.
I just bought a Macbook Pro 2012 (non-retina) 15 inch from a friend. I think it is running Mountain Lion (has not been upgraded to Mavericks yet), and has iLife on it. It came with the stock 500 gb 5400 rpm internal hard drive. At home, I only have the Snow Leopard OS installation Cds and a copy of iLife 2011 installation Cds. I am going to buy 16 gb of RAM from Other World Computing to install.
I want to replace the hard drive with a 1 tb hard drive, preferably something that is $100 or less.
I talked to Other World Computing (OWC) and looked at the Data Doubler Option to replace the optical drive with a Solid State drive, but decided that for now I want to keep the optical drive inside the computer for portability issues.
I know that Solid State drives are better, but they are still too small, and I want the ease and portability of a 1 tb size INSIDE my computer.
Initially I was going to order this from Other World Computing: 1.0TB 2.5" HGST Travelstar 7K1000 7200RPM SATA 6Gb/s 9.5mm Notebook Drive 32MB Cache. *'New' Factory Replacement with 2+ Year HGST Warranty*    As of April 4, 2014 it's on sale for $79
But then I started reading some of the discussions online and thought maybe I should get a hybrid solid state drive?
I saw on Amazon the Seagate 1TB Solid State Hybrid Drive SATA 6Gbps 64MB Cache 2.5-Inch ST1000LM014 It's on sale for $94.
But according to some reviews, this Seagate has a platter that is only 5400rpm, unlike the previous Seagate Momentum that has a platter speed of 7200rpm.
How reliable are the Seagate, versus a Toshiba or Western Digital or Hitachi or something else?
Here are my questions about replacing the hard drive:
1. Is a hybrid solid state drive going to need some kind of special formatting after I put it into the macbook so that I can put the operating system on it?
2. Is a "normal" platter hard drive more reliable than a hybrid solid state drive?
3. Is there any additional driver or special software that I have to install for a hybrid solid state drive?
4. Currently there is no personal data stored on the computer. Can I just put the new hard drive in, and then insert the snow leopard install cd?
5. If I install snow leopard, can I just go to the App store and get the free upgrade to Mavericks?
6. If I want to do the "Data Doubler" option in the future and add a normal Solid State drive into my computer, will it have trouble interacting with the 1 tb hybrid solid state drive?
I would love to get some recommendations about the smartest option to upgrade my hard drive with something that will be fast (I edit lots of photos) and large (1 tb) that isn't going to cost too much. I don't know much about the different brands or options (and there are so many listed in tons of online reviews), that I got really overwhelmed and confused by the info out there.
I would really appreciate any help and advice. I've never switched out a hard drive before.
PLEASE HELP !!! Thanks!
Here is the "About this Mac" Info:
Macbook Pro 15-in Mid 2012
Model Identifier: MacBookPro9,1
Processor: 2.3 GHz Intel Core i7
Memory: 4 GB 1600 MHz DDR3
Software: OS x 10.8.5
Storage (Hard drive): APPLE HDD ST500LM012 Media, Rotational, SATA, GPT (GUID Partition Table)

1. Is a hybrid solid state drive going to need some kind of special formatting after I put it into the macbook so that I can put the operating system on it?
The boot drive, regardless of what it is, needs to be formatted as Mac OS Extended (Journaled). This is standard with OS X.
2. Is a "normal" platter hard drive more reliable than a hybrid solid state drive?
There are arguments pro and con. Bottom line, SSD's and hybrid drives are still quite expensive per GB than standard hard drives. If you have the bucks and are a speed demon, go ahead.   I have better use for my money.   Standard hard drives are mechanical and may wear out over time. But even though SSDs are not mechancial, they can still go bad and ultimately they even have a limit to their write capacity. The jury is still out on this debate.
3. Is there any additional driver or special software that I have to install for a hybrid solid state drive?
No
4. Currently there is no personal data stored on the computer. Can I just put the new hard drive in, and then insert the snow leopard install cd?
You can physically put the hard drive in but probably not install Snow Leopard on this MBP.
The mid-2012 MacBookPro9,1 models came with Lion 10.7.3 (11D2097) preinstalled.   It is very unlikely you would be able to install Snow Leopard on it. Historically you cannot install a version of OS X that is earlier than the version that came with your Mac (even if you replace the hard drive).
5. If I install snow leopard, can I just go to the App store and get the free upgrade to Mavericks?
Not via Snow Leopard on this MBP. See my response to #4.
6. If I want to do the "Data Doubler" option in the future and add a normal Solid State drive into my computer, will it have trouble interacting with the 1 tb hybrid solid state drive?
No. They are completely independent of each other; they are just independent storage units (drives) and their RAM does not interact.

Please help!!!!! on non blocking io

Similar Messages

Maybe you are looking for