Please help ! "Oracle Reports Server CGI - Reports Server name is not specified."
Hello Gurus,
I have an html form that allows putting in a parameter. Upon
submit the form, it'll pass a string URL with the parameter to a
new browser.
My url: http://localhost/servlet/oracle.reports.rwcgi.RWServlet?
diary&14252
I also used keymap looks like this
diary: report=Diary.rdf server=servername desformat=pdf
destype=cache userid=id/psswd@db myoid=%1 %*
But I get an Error: The requested URL was not found, or cannot
be served at this time. Oracle Reports Server CGI - Reports
Server name is not specified.
However, if I move the cursor to the end of the same url (or put
a space at the end) and hit Enter, then the report is
displayed. I guess there must be something wrong with my
configuration. Please help. I appreciated any inputs from you.
Thanks in advance.
Ashley
I found the solution to my problem. It was nothing to do with
the cgicmd.dat keymap file, but the html form itself. It's
confused between the url arguments and form arguments from the
submit button. So, what I did was open a new window with all
arguments instead of using the submit function.
Regards,
Ashley
Similar Messages
-
Oracle Reports Server CGI - Report Job was cancelled upon user request.
I am running reports on the web through Forms using Run_Report_Object built in. I am using Oracle 9iAS Enterprise Edition Release 1(1.2.2.2.2), Forms 6i Patch 9 (6.0.8.18.3) and Reports 6i Patch 9 (6.0.8.18) using CGI implementation. Most reports are running fine, but I have one that produces 125 pages and we are getting the following messages in the browser:
Error: The requested URL was not found, or cannot be served at this time.
Oracle Reports Server CGI - Report Job was cancelled upon user request.
However if you look at the Reports Server Queue Status thru the browser it shows that the report did finish, but it took 16 minutes. But the user gets the above message in their browser window.
Is there a way to get the first page of the report to display, while the rest of the report finishes, so the browser window doesn't timeout and display the above error?
Any help would be greatly appreciated.hi ,
There is no limit on the report run time. The most probable reason why you are getting the 'Report cancelled upon user request' message is the users might have hit the "cancel Report" button which is displayed when it is running in 'SYNCHRONOUS MODE'. do not hit that button as it will terminate the report. to increase the speed of returning the results by the report, try improving the sql that you use in the report, or if you have DBA rights try adding in INDEXES on the columns of the tables used by the report.
Hope this helps
Manoj -
CrashReporter - Could you please help to understand this crash report?
Could you please help to understand this crash report below?
If I'm not wrong it started after update the Mac OS X to version 10.5.6 - every startup.
Note: First update by regular update then after by combo.
Thanks in advance!
_ CrashReporter
Process: aslmanager [218]
Path: /usr/sbin/aslmanager
Identifier: aslmanager
Version: ??? (???)
Code Type: X86 (Native)
Parent Process: launchd [1]
Date/Time: 2009-04-05 08:29:52.069 -0300
OS Version: Mac OS X 10.5.6 (9G55)
Report Version: 6
Exception Type: EXCBADACCESS (SIGSEGV)
Exception Codes: KERNINVALIDADDRESS at 0x0000000000200000
Crashed Thread: 0
Thread 0 Crashed:
0 libSystem.B.dylib 0x952a8a85 asl_get64 + 11
1 libSystem.B.dylib 0x952aa034 aslfile_fetchpos + 939
2 libSystem.B.dylib 0x952aa2f6 aslfilematch + 339
3 aslmanager 0x00002409 0x1000 + 5129
4 aslmanager 0x00002b3e 0x1000 + 6974
5 aslmanager 0x0000211a 0x1000 + 4378
Thread 0 crashed with X86 Thread State (32-bit):
eax: 0x001ffffc ebx: 0x952a9ca1 ecx: 0x00000000 edx: 0x00000000
edi: 0x0000ff3d esi: 0x00100b30 ebp: 0xbffffbc8 esp: 0xbffffba0
ss: 0x0000001f efl: 0x00010286 eip: 0x952a8a85 cs: 0x00000017
ds: 0x0000001f es: 0x0000001f fs: 0x00000000 gs: 0x00000037
cr2: 0x00200000
Binary Images:
0x1000 - 0x2ffd +aslmanager ??? (???) <201b2dea48b8d80ac1432ff85244ed31> /usr/sbin/aslmanager
0x8fe00000 - 0x8fe2db43 dyld 97.1 (???) <100d362e03410f181a34e04e94189ae5> /usr/lib/dyld
0x9444a000 - 0x9444efff libmathCommon.A.dylib ??? (???) /usr/lib/system/libmathCommon.A.dylib
0x951a4000 - 0x951abfe9 libgcc_s.1.dylib ??? (???) <f53c808e87d1184c0f9df63aef53ce0b> /usr/lib/libgcc_s.1.dylib
0x951ba000 - 0x95321ff3 libSystem.B.dylib ??? (???) <d68880dfb1f8becdbdac6928db1510fb> /usr/lib/libSystem.B.dylib
0xffff0000 - 0xffff1780 libSystem.B.dylib ??? (???) /usr/lib/libSystem.B.dylib
_ Log
05/04/09 8:25:58 com.apple.loginwindow[35] Shutdown NOW!
05/04/09 8:25:58 com.apple.loginwindow[35] System shutdown time has arrived
05/04/09 8:25:58 com.apple.SystemStarter[30] Stopping Missing Sync Listener
05/04/09 8:25:58 com.apple.SystemStarter[30] Stopping HP Trap Monitor
05/04/09 8:25:58 com.apple.SystemStarter[30] Stopping HP IO Monitor
05/04/09 8:25:59 com.apple.SystemStarter[30] kextunload: unload kext /System/Library/Extensions/Pvsnet.kext succeeded
05/04/09 8:25:59 com.apple.SystemStarter[30] kextunload: unload kext /System/Library/Extensions/ConnectUSB.kext succeeded
05/04/09 8:26:02 com.apple.SystemStarter[30] kextunload: unload kext /System/Library/Extensions/vmmain.kext succeeded
05/04/09 8:26:02 com.apple.SystemStarter[30] kextunload: unload kext /System/Library/Extensions/hypervisor.kext succeeded
05/04/09 8:26:35 com.apple.launchctl.System[2] BootCacheControl: could not open /var/db/BootCache.playlist: No such file or directory
05/04/09 8:26:35 com.apple.launchctl.System[2] BootCacheControl: could not unlink playlist /var/db/BootCache.playlist: Unknown error: -1
05/04/09 8:26:37 com.apple.launchctl.System[2] launchctl: Please convert the following to launchd: /etc/mach_init.d/dashboardadvisoryd.plist
05/04/09 8:26:37 com.apple.launchd[1] (com.apple.blued) Unknown key for boolean: EnableTransactions
05/04/09 8:26:37 com.apple.launchd[1] (org.cups.cupsd) Unknown key: SHAuthorizationRight
05/04/09 8:26:37 com.apple.launchd[1] (org.ntp.ntpd) Unknown key: SHAuthorizationRight
05/04/09 8:26:49 org.ntp.ntpd[27] Error : nodename nor servname provided, or not known
05/04/09 8:26:57 com.apple.SystemStarter[30] Starting up Missing Sync Listener
05/04/09 8:26:57 com.apple.SystemStarter[30] Starting HP IO Monitor
05/04/09 8:26:58 com.apple.SystemStarter[30] kextload: extension /System/Library/Extensions/hypervisor.kext is already loaded
05/04/09 8:26:58 com.apple.SystemStarter[30] Starting HP Trap Monitor
05/04/09 8:26:58 com.apple.SystemStarter[30] kextload: extension /System/Library/Extensions/vmmain.kext is already loaded
05/04/09 8:26:59 com.apple.SystemStarter[30] kextload: extension /System/Library/Extensions/ConnectUSB.kext is already loaded
05/04/09 8:27:00 com.apple.SystemStarter[30] kextload: extension /System/Library/Extensions/Pvsnet.kext is already loaded
05/04/09 8:27:00 com.apple.SystemStarter[30] kextload: /Library/StartupItems/Parallels/Pvsvnic.kext loaded successfully
05/04/09 8:27:06 com.apple.SystemStarter[30] Sun Apr 5 08:27:06 wslys-Mac.local Missing Sync Listener[77] <Warning>: 3891612: (CGSLookupServerRootPort) Untrusted apps are not allowed to connect to or launch Window Server before login.
05/04/09 8:27:06 com.apple.SystemStarter[30] Sun Apr 5 08:27:06 wslys-Mac.local Missing Sync Listener[77] <Error>: kCGErrorRangeCheck : On-demand launch of the Window Server is allowed for root user only.
05/04/09 8:27:06 com.apple.SystemStarter[30] Sun Apr 5 08:27:06 wslys-Mac.local Missing Sync Listener[77] <Error>: kCGErrorRangeCheck : Set a breakpoint at CGErrorBreakpoint() to catch errors as they are returned
05/04/09 8:27:08 com.apple.SystemStarter[30] _RegisterApplication(), FAILED TO establish the default connection to the WindowServer, _CGSDefaultConnection() is NULL.
05/04/09 8:27:20 com.apple.launchd[1] (com.apple.UserEventAgent-LoginWindow[123]) Exited: Terminated
05/04/09 8:27:20 com.apple.launchctl.Aqua[129] launchctl: Please convert the following to launchd: /etc/machinit_peruser.d/RemoteUI.plist
05/04/09 8:27:20 com.apple.launchd[116] (com.apple.AirPortBaseStationAgent) Unknown key for boolean: EnableTransactions
05/04/09 8:27:21 com.apple.FolderActions.enabled[130] launchctl: Error unloading: com.apple.FolderActions.folders
05/04/09 8:27:42 quicklookd[146] [QL ERROR] 'Creating thumbnail' timed out for '<QLThumbnailRequest /Users/wsly/Downloads/m090374535329zdwg_650ref.mov>'
05/04/09 8:27:42 Dock[138] [QL ERROR] quicklookd crashed while thumbnailing /Users/wsly/Downloads/m090374535329zdwg_hdref.mov
05/04/09 8:29:52 com.apple.launchd[1] (com.apple.aslmanager[218]) Exited abnormally: Segmentation faultTry repairing the disk through the Mac OS X install disk.
-
Please help to get onhand stock report with last purchase and billed date warehouse and item wise
please help to get onhand stock report with last purchase and billed date warehouse and item wise
Hi Rajeesh Ambadi...
Try This
SELECT distinct T0.ITEMCODE , t1.ItemName, T0.ONHAND as 'Total Qty',
T1.LASTPURDAT ,t1.LastPurPrc
FROM OITW T0 INNER JOIN OITM T1 ON T0.ITEMCODE = T1.ITEMCODE
INNER JOIN OITB T2 ON T1.ITMSGRPCOD=T2.ITMSGRPCOD left join ibt1 t3 on t3.itemcode = t0.itemcode and t3.whscode = t0.whscode
WHERE
T0.ONHAND>0
AND T0.WhsCode ='[%0]'
Hope Helpful
Regards
Kennedy -
Please help me with this error: "Apple application support was not found... Error 2"
Can anyone please help me with this error: "Apple application support was not found... Error 2"
I've followed the instructions by removing all Apple files from my laptop, but when I reinstall the iTunes software it still comes up with this message:
"Apple application support is required to run iTunesHelper. Please uninstall iTunes, then install iTunes again. Error 2"
Thank youiTunes "Apple Application Support is required... Error 2" and possible fix.
I know this is a bit late but I came accross this thread trying to resolve this same problem and came up with a solution that worked for me, so thought I would share it here too. I hope it helps someone else.
I just resolved this on Win Vista (should apply equally for Win7 too). Please uninstall iTunes before proceeding though. I'll walk you through the process I followed, if you like you can jump straight to the Solution section.
Problems:
The initial error during the installation of iTunes was:
An error occurred during the installation of assembly 'Microsoft.VC80.CRT,version="8.0.50727.4053",type="win32",publicKeyToken='1fc8b 3b9a1e18e3b",processorarchitecture="x86". Please refer to Help and Support for more information. HRESULT:0x8007054F
The error (after installing iTunes) when trying to run iTunes was:
Apple Application Support is required to run iTunes. Please uninstall iTunes, then install iTunes again. Error 2 (Windows error 2).
After trying various fixes around the forums I came across this MSKB article, which relates to the first installation error:
http://support.microsoft.com/kb/2688946
This lead me to trying to install MS Visual C++ but I received the following error trying to install that:
Error 1935.An error occurred during the installation of assembly ‘Microsoft.VC80.ATL,type=”win32”,version=”8.0.50727.762”,publicKeyToken=”1fc8b3 b9a1e18e3b”,processorArchitecture=”amd64”’. Please refer to Help and Support for more information. HRESULT: 0x80070BC9. Assembly interface: IassemblyCacheItem, function: Commit, component: {837BF1EB-D770-94EB-A01F-C8B3B9A1E18E}
Note: The installation of VC++ rolls back when it fails.
Solution:
Through this error I found this MSKB article:
http://support.microsoft.com/kb/946414
The Automated MS "Fix It" msi package didn’t work.
Note: Please backup your registry first (see the above MSKB article for instructions).
I opened the registry and (as instructed in the MSKB article) deleted the following keys:
HKEY_LOCAL_MACHINE\COMPONENTS\
PendingXmlIdentifier
NextQueueEntryIndex
AdvancedInstallersNeedResolving
Reboot and reinstall iTunes.
If it helps you please like this so others can find it. -
For those who have problems RE: My iPhone 4 connecting to my pc shows my friends name in the DIGITAL camera Drive..It dsiplays my correct name when I`m on iTunes..PLEASE HELP ME HOW DO I CHANGE THE NAME IN THE DIGITAL CAMERA DRIVE??
SOLUTION:
Iam pointing t0 windows7 os.
1) go to control panel
2) open hardware and sound
3) In that open Devices and printers
4)In that u can find Apple Iphone.
5) now right click on this --> Hardware --> Properties --> General --> Uninstall --> ok.
6) now unplug and plug in ur iphone again.There u go u iphone name changes to its original name.I am having this problem. At first with the new iPhone 5, and then with the iPad 2. I am not sure why this is happening.
My gut feeling is this is an iO6 issue and here's why -
The problem mainly occurs with apps. I have about 150 apps, and when I plugged in the phone, iTunes went to sync all of them. The process would hang up after about 20 - 30 apps were loaded onto the phone. I could tell where about the process hung up because the apps on the phone showed up as "waiting".
Then on the iPad 2 I plugged in to sync and saw there was a huge "Other" component in my storage. It required me to restore the iPad 2 from backup. With this restore the same issues occurred - putting the apps back on the iPad would hang up. The videos on the iPad also got stuck - maybe after about 10 hours of videos transfered iTunes crashed.
My solution has been to soft reset the device, restart Windows, and continue the process until it's complete. This is remarkably inefficient and time-intensive but everything works with patience.
I have been wondering if others have had these same problems. -
Please help I just accidentally deleted a very very important note from my "Notes" on my iPhone 4s. How can I get it back?
Is there a "Trash" file somewhere for deleted notes?
Thank you,
SusanHad you never backed up the phone before? When you saw the iTunes logo and cable, the device was in recovery mode. The data was already lost. The only way to recover from that is to restore the device, which will delete all of your data. You will only be able to restore to your last backup, whenever that was. Sorry this happened, but this highlights the importance of doing regular backups. The backup is the only protection you have against a problem like this.
-
i downloaded lion but lost the setup assistant. please help me recover the setup assistant. i do not know where/how to find/enter information in the terminal as was suggested.
Launch the Terminal application; e.g., by entering the first few letters of its name in a Spotlight search. Copy or drag -- do not type -- the line below into the Terminal window, then press return:
sudo rm /var/db/.AppleSetupDone
You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. Confirm.
Reboot. The Setup Assistant will launch. -
PLEASE Help! - Bridge and Premiere CC- "the operation could not be completed" and export error - MAC
Dear Adobe Community,
I got my first imac a few days ago, and i decided to install Adobe CC.
When i want to run Adobe Bridge, says "the operation could not be completed", the same happens with Adobe After Effects.
And I also have a problem with Premiere, when i want to export a project says that premiere must close.
This is the try version, is this a problem of Adobe or Apple? i'm very worried
Help!
Thank you!
IvanaMuchas gracias!!! Ha funcionado!
El 11/02/2014, a las 00:02, Federico Platon <[email protected]> escribió:
Re: PLEASE Help! - Bridge and Premiere CC- "the operation could not be completed" and export error - MAC
created by Federico Platon in Foros de usuario a usuario - View the full discussion
Confirma que se trata de una cuestión de permisos.
Por cierto te aconsejos actualices la 9.1 a 9.2, posiblemente se habría arreglado así también.
Bueno los pasos son:
2. Select Go from the Finder Menu.
3. Select Computer.
4. Select Macintosh HD.
5. Select Users.
6. Select your user profile.
7. Right click on user profile. Select Get Info.
8. Go to bottom and unlock with admin password to make changes.
9. Make sure your user profile has Read and Write privileges by selecting from dropdown menu.
10. Go down to wheel at very bottom and select Apply to enclosed items. This should allow Adobe Bridge to run properly.
Creo que no se necesita traducción.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6107188#6107188
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6107188#6107188
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6107188#6107188. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Foros de usuario a usuario at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0. -
I can't use my apple account in my Iphone please help me a message appear said"This ID has not used in the iTunes Store"
Hello, BaraaBa.
Thank you for visiting Apple Support Communities.
This sounds like your Apple ID has not yet been used with the iTunes Store. Here is an article that I would recommend going through when experiencing this issue.
Use your Apple ID with the iTunes Store
Open the latest version of iTunes.
Choose Store > Sign In.
Enter your Apple ID and password and click Sign In.
Click Review when asked to review your information.
Enter your billing information.
Click Continue after you enter your credit card and billing information. You can remove or edit your credit card information at any time. Learn more about updating your iTunes Store account information.
Using an existing Apple ID with the iTunes Store, Mac App Store, and iBooks Store
http://support.apple.com/kb/HT2589
Cheers,
Jason H. -
i plug in my iphone 4 and i loss all contact... i try to backup restore but its error say not enough space. please help me. i want only my contact backup restore not everything. so i dont know how can i do ?
Try to connect in recovery mode to restore, without using the latest backup, explained here:
iOS: Unable to update or restore -
Oracle Reports Team Please Help..! Arabic Reports PDF not working in Solaris
Hi,
I am not able to Generate Arabic PDF reports (HTMLCSS is working fine with me.....)
O/s is Solaris........O/s supports Arabic....
NLS_LANG is set to "ARABIC_EGYPT.AR8ISO8859P6"
In place of arabic content its showing Junk characters..... In win2k Its working fine........ I have checked my uifont.ali I am giving my PDF section details..
[ PDF:Embed ]
helvetica = "helvetica.afm helvetica.pfa"
[ PDF:Subset ]
Arial = "Arial.ttf"
helvetica = "Arial.ttf"
"Andale Duospace WT J" = "Aduoj.ttf"
"Albany WT J"="AlbanWTJ.ttf"
"MS UI Gothic" = "msgothic.ttc"
And i have Included the Fonts folder entry in REPORTS_PATH variable entries...Is there any thing needs to be done.....??????
Why its not working in Solaris........PLEASE HELP ME OUT...........!!!!!
Thanks in Advance........
sharat ([email protected])Hi Sharat
I see that you have two entries for helvetica font in your uifont.ali. Be aware that order of precedence is alias->embed->subset. If the helvetica part is appearing junk, try and comment out the entry in embed section and let the subsetting happen.
On Solaris, ensure that the case of font file names match.
Regards
Sripathy -
Please Help! NullPointerException on JSP Report
I've been trying to run a JSP Report on Oracle 9iAS, but when I call it on browser the error below appears.
Please, Help me!
Reports Error Page
Mon Jul 01 14:04:24 GMT 2002
java.lang.NullPointerException:
java.lang.NullPointerException:
at oracle.reports.rwclient.RWClient.getTrace(RWClient.java:969)
at oracle.reports.jsp.JspTagUtil.getRWClient(JspTagUtil.java:59)
at oracle.reports.jsp.RwTag.setPageContext(RwTag.java:54)
at oracle.reports.jsp.ReportTag.setPageContext(ReportTag.java:85)
at bench.AssemblyHistory._jspService(_AssemblyHistory.java:55)
at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:385)
at oracle.jsp.JspServlet.doDispatch(JspServlet.java:259)
at oracle.jsp.JspServlet.internalService(JspServlet.java, Compiled Code)
at oracle.jsp.JspServlet.service(JspServlet.java:148)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
at org.apache.jserv.JServConnection.processRequest(JServConnection.java:435)
at org.apache.jserv.JServConnection.run(JServConnection.java, Compiled Code)
at java.lang.Thread.run(Thread.java, Compiled Code)hi artur,
please check if the reports server works correctly
on your iAS installation.
to check this run the test.jsp report from the
reports server test page.
you can find the test page by accessing the default
home page of your webserver
http://hostname.domain:port/
click on the demonstrations tab - business intelligence and forms - reports services
click on the 'Test a JSP Report...' link.
regards,
christian -
Please Help Urgently to refresh the report on the change in data
We want to refresh report at runtime for the Drill Down report if any user changes the Data. We changes the data from the form which is called from the report and we want to this effect on the report on the prompt.
Is there any method to close the report while it is in the queue of Background Engine? Can we refresh the report ? Please help urgently.
Thanks in Advance.Pritesh,
Reports goes out to the database and fetches the data (not a snapshot) and returns the information, formats it and displays it. The only way to refresh, is to rerun the report.
If your are running from the server, you need to make sure you are not fetching from cache (you determine this from destype and set the life of the cache in the servername.ora file).
I am unaware of any way to programatically close the report once displayed. The user must take action to close the report (unless you call the operating system to kill the display). When you rerun the report from Oracle Forms, you will get fresh data.
Regards,
The Oracle Reports Team jls -
Please help: how to connect to SQL Server Analysis Service (OLAP cube) with Crystal Re[ort XI
I'm trying to connect to an OLAP cube on our SQL Server 2005 machine which is running Analysis Services (9.0). When I am trying to use the Crystal Reports menu follow steps mentioned below:
1) New report -> Standard Report Wizard
2) Create New Connection -> OLAP -> Add
Source Type: MS OLE DB Provider fir Analysis Service 9.0
But when I click buttone 'Test', CR prompt me: The connection could not be establiched. Faild to set properties.
HOWEVER: I can connect SQl Server Analysis Server with Excel and other Report tools.
Our softwares are as mentioned following:
- OS: Windows 2003 Server
- SQL Server: SQL Server 2005 Enterprise
- Crystal Reports XI Release 2 Developer Edition
And SQL Server & Crystal Report are running in the same PC.
Any help?Please re-post if this is still an issue with your OLAP Connectivity please post to Business Objects » Other Business Objects Products Forum or purchase a case and have a dedicated support engineer work with you directly
Maybe you are looking for
-
could any one be of assistance i cant boot my blackberry z3 it gives me this error www.bberror.com/bb10-0015
-
HT4933 i want to buy additional space for my i phone
i want to buy additional Space one year not for 1 month . can you help me ?
-
Please help me in Calculating Sybase IQ Daily,WTD,MTD, YTD,QTD,SPLM,SPLY
Hi Team, Need to Calculate No of Customers from a particular dimension table on these measures Daily,WTD,MTD, YTD,QTD,SPLM,SPLY Can anybody help me with the Logic its extremely urgent. Thanks all for your help Regards, Yedu
-
Hi, I need to change multiple .txt file names in a folder. I have found information about renaming the files using Powershell but I do not what to rename the file. I want to add an "_Deviation" to it. I go into powershell and can get this far. PS C:\
-
Versions of Windows for running running CS3 Web Premium?
Which recent versions of Windows will CS3 Web Premium still run successfully on?