Please help... overlaying images and tables

Hello.. i'm relatively new to Dreamweaver so excuse me if
this is a "duh" question.
Ok.. so i am redesigning my website, before i used Microsoft
Word. So trying to learn Dreamweaver and its tables and everything
has been very confusing, however i am coming along. So here is my
problem.. i have a Nav bar going down the left side of my page, and
in my old website i used an image for the border... the image would
go behind and i would place the buttons on top of the image..
It doesn't look like things work that easily in dreamweaver,
so i was hoping someone could point me in the right direction.
Here is a screenshot of my workspace--
http://www.danwayfilms.com/help.JPG
Here is the look i want to achieve.. www.danwayfilms.com ...
as you can see, the images jumping around is 1 reason why i
switched to dreamweaver...
thanks.. please reply ASAP!!
Dan

Here's an opening salvo. If your previous experience with web
pages was
with Microsoft Word, then you essentially have NO experience
with web pages.
That being the case, you face a LONG and tedious uphill climb
with DW.
Without knowing anything about HTML and CSS, you will
transition from one
mysterious problem to another, all the while thinking with a
"click and
drag" mindset, and most likely eventually give up in
frustration.
The truth is that working with HTML is definitely NOT like
working with
Microsoft Word. The sooner you learn that, the better off you
will be.
Please do yourself a favor and take a week or two to just
read about HTML -
so you'll know some of the language. You can start at
http://www.w3schools.com with
their excellent tutorials.
Also, images of pages do no good. To get definitive help, we
need to see
the code on the page, since it's always the code that
determined how the
page will look in any browser....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Fxmaker" <[email protected]> wrote in
message
news:[email protected]...
> Hello.. i'm relatively new to Dreamweaver so excuse me
if this is a "duh"
> question.
>
> Ok.. so i am redesigning my website, before i used
Microsoft Word. So
> trying
> to learn Dreamweaver and its tables and everything has
been very
> confusing,
> however i am coming along. So here is my problem.. i
have a Nav bar going
> down
> the left side of my page, and in my old website i used
an image for the
> border... the image would go behind and i would place
the buttons on top
> of the
> image..
> It doesn't look like things work that easily in
dreamweaver, so i was
> hoping
> someone could point me in the right direction.
>
> Here is a screenshot of my workspace--
>
http://www.danwayfilms.com/help.JPG
>
> Here is the look i want to achieve.. www.danwayfilms.com
... as you can
> see,
> the images jumping around is 1 reason why i switched to
dreamweaver...
>
> thanks.. please reply ASAP!!
>
> Dan
>

Similar Messages

  • PLEASE Help! - Bridge and Premiere CC- "the operation could not be completed" and export error - MAC

    Dear Adobe Community,
    I got my first imac a few days ago, and i decided to install Adobe CC.
    When i want to run Adobe Bridge, says "the operation could not be completed", the same happens with Adobe After Effects.
    And I also have a problem with Premiere, when i want to export a project says that premiere must close.
    This is the try version, is this a problem of Adobe or Apple? i'm very worried
    Help!
    Thank you!
    Ivana

    Muchas gracias!!! Ha funcionado!
    El 11/02/2014, a las 00:02, Federico Platon <[email protected]> escribió:
    Re: PLEASE Help! - Bridge and Premiere CC- "the operation could not be completed" and export error - MAC
    created by Federico Platon in Foros de usuario a usuario - View the full discussion
    Confirma que se trata de una cuestión de permisos.
    Por cierto te aconsejos actualices la 9.1  a 9.2, posiblemente se habría arreglado así también.
    Bueno los pasos son:
    2. Select Go from the Finder Menu.
    3. Select Computer.
    4. Select Macintosh HD.
    5. Select Users.
    6. Select your user profile.
    7. Right click on user profile. Select Get Info.
    8. Go to bottom and unlock with admin password to make changes.
    9. Make sure your user profile has Read and Write privileges by selecting from dropdown menu.
    10. Go down to wheel at very bottom and select Apply to enclosed items. This should allow Adobe Bridge to run properly.
    Creo que no se necesita traducción.
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6107188#6107188
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6107188#6107188
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6107188#6107188. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Foros de usuario a usuario at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • HT4623 please help - installed IOS7 and now I am having problems playing Words Free on my Iphone.  It gives me a pop up telling me to connect to ITunes but will not connect.  Cannot get out and have to continually shut down my phone and start over.

    please help - installed IOS7 and now I am having problems playing Words Free on my Iphone.  It gives me a pop up telling me to connect to ITunes but will not connect.  Cannot get out and have to continually shut down my phone and start over.

    Hi, jeantwin.
    Thank you for visiting Apple Support Communities.
    The steps in the article below may help you resolve the issue with push notifications.
    iPad and iPod touch: Unable to use YouTube or Push notifications
    http://support.apple.com/kb/ts3305
    If the issue persists, try signing out of your Apple ID and then sign back in.
    iOS: Changing the signed-in iTunes Store Apple ID account
    http://support.apple.com/kb/HT1311
    Cheers,
    Jason H.

  • Urgent please help: what is the table name for cash management reports?

    I am wondering what the table name for cash management reports is. I am trying to figure out then if I have any missing.
    Please help.

    I checked MSEG table. But, I didn't find any field for date.
    Can you tell me field name.
    Regards
    Siva

  • Can't find a playlist I created on my playlist or computer? I didn't delete it. I don't want to create it again because it took a long time. please help me find and recover.

    Can't find a playlist I created on my playlist or computer? I didn't delete it. I don't want to create it again because it took a long time. please help me find and recover.

    Playlists only exist as part of the larger iTunes library listing so if you are not seeing it there it doesn't exist anywhere else.  I know with my older version of iTunes it is very easy to accidentally delete a playlist.  With newer versions it may be possible to recover it with the undo feature in the menu but this likely will only work immediately after the deletion.

  • IF YOU HELP MY NANO upgraded when you install PERFECT BUT DOES NOT APPEAR ON THE SCREEN NOTHING BUT as if you were OFF if turned PLEASE HELP OR MORE AND HAS THE NEW UPDATE

    IF YOU HELP MY NANO upgraded when you install PERFECT BUT DOES NOT APPEAR ON THE SCREEN NOTHING BUT as if you were OFF if turned PLEASE HELP OR MORE AND HAS THE NEW UPDATE

    iPod not recognized in 'My Computer' and in iTunes for Windows

  • HT202879 Since opening an existing Pages doc, all the previously centred images and tables are now too far to the rights - leaving a large blank space to the left of each page. Any ideas reducing?

    Since opening an existing Pages doc, all the previously centred images and tables are now too far to the rights - leaving a large blank space to the left of each page. Any ideas re fixing this?  Problem remains even when I open an earlier version on the previous version of Pages

    It has always been that the upgrade tries to be the "master" over the older version.
    Anyway in Pages 09 you have probably the Comments field showing, making all contetn to move to the right.
    Go to View menu > Hide Comments.

  • I want to be a good SAP user but please help me how and can i do the right step about SAP

    i want to be a good SAP user but please help me how and can i do the right step about SAP

    Hi,
    you can start learning SAP from an end-user/key-user perspective with the online learning portal of SAP Learning Hub, business user edition.
    Further information can be found here:
    SAP Learning Hub
    Regards,
    Arnold

  • Please Help - How to pass Table objects as input and output parameters using VC++

    Please help me by giving a sample code to call the procedure
    GetClassInstanceProperties from a VC++ application using
    Oracle Objects for OLE
    CREATE OR REPLACE TYPE TY_INST_ID_PROP_PAIR AS OBJECT
    (INST_ID CHAR(38), PROP_ID CHAR(38), VALUE XMLTYPE);
    CREATE OR REPLACE PACKAGE DBMS_PROPERTYSTORE
    AUTHID CURRENT_USER
    AS
         --Used to return the ids from the functions
         TYPE tt_UUIDs IS TABLE OF char(38) index by binary_integer;
         TYPE tt_inst_id_prop_pairs is table of ty_inst_id_prop_pair index by binary_integer;
         PROCEDURE GetClassInstanceProperties(ClassId IN char, Prop_Ids in TT_UUIDs,
    Inst_Id_Prop_Pairs out TT_Inst_Id_Prop_Pair);
    END DBMS_PROPERTYSTORE;
    CREATE OR REPLACE PACKAGE BODY DBMS_PROPERTYSTORE AS
         PROCEDURE GetClassInstanceProperties
              ClassId IN char,
              Prop_Ids in TT_UUIDs,
              Inst_Id_Prop_Pairs out TT_INST_ID_PROP_PAIR
         AS
         BEGIN
              --Return the instanceid,propertyid and values for a certain class
              --only return those properties that in the user supplied Prop_ids table
              FOR I in Prop_Ids.FIRST..Prop_Ids.LAST loop
                   select TY_Inst_Id_Prop_Pair(i.Inst_Id,p.Prop_Id,p.Value) into Inst_Id_Prop_Pairs(I)
                        from TBL_Instance i, table(Prop_Pairs) p
                        where I.Cls_Id.Cls_Id=ClassID
                        and p.Prop_Id = Prop_Ids(I);
              END LOOP;
         EXCEPTION
              WHEN NO_DATA_FOUND THEN
                   raise_application_error(-20100, 'No data found');
              WHEN OTHERS THEN
                   raise_application_error(-20200, SQLERRM);
         END GetClassInstanceProperties;
    END DBMS_PROPERTYSTORE;

    HI
    Go to the lay out of your screen and doublr click on the table control fields, you can get the Properties/Attribute of the screen or table control Fields
    Assing a Group GRP1 for all the fields i n the table control.
    in PBO
    if ok_code = 'INPUT'.
    LOOP AT SCREEN.
    IF screen-grp1 = 'GRP1'.
    screen-input = 1.
    modify screen.
    endif.
    ENDLOOP.
    elseif ok_code = 'OUTPUT'.
    LOOP AT SCREEN.
    if screen-grp1 = 'GRP1'.
    screen-input = 0.
    modify screen.
    endif.
    endloop.
    endif.
    Regards
    Ramchander Rao.K
    Edited by: Ramchander Krishnamraju on Aug 8, 2009 5:27 AM

  • Please Help! Drag and drop does not work in Adobe AIR 3.1 (FlashBuilder 4.6)

    I am working on a PC is made of air and flashbuilder 4.6.
    Drag and drop application does not work in Flash Builder 4.6.
    However, the same source will work with Flash Builder 4.5.
    Please help me.
    <?xml version="1.0" encoding="utf-8"?>
    <s:WindowedApplication xmlns:fx="http://ns.adobe.com/mxml/2009"
                                  xmlns:s="library://ns.adobe.com/flex/spark"
                                  xmlns:mx="library://ns.adobe.com/flex/mx"
                                  backgroundColor="#323232" width="100%" height="100%"
                                  initialize="init(event)"
                                  nativeDragEnter="onDragEnter(event)"
                                  nativeDragDrop="onDragDrop(event)">
              <fx:Script>
              <![CDATA[
                        import mx.events.FlexEvent;
                        protected function init(event:FlexEvent):void
                                  addEventListener(NativeDragEvent.NATIVE_DRAG_ENTER, onDragEnter);
                                  addEventListener(NativeDragEvent.NATIVE_DRAG_DROP, onDragDrop);
                        private function onDragEnter(event:NativeDragEvent):void
                                  if (event.clipboard.hasFormat(ClipboardFormats.FILE_LIST_FORMAT))
                                            NativeDragManager.acceptDragDrop(this);
                        private function onDragDrop(event:NativeDragEvent):void
                                  var arr:Array;
                                  arr = Array(event.clipboard.getData(ClipboardFormats.FILE_LIST_FORMAT));
                                  startImage.source = (arr[0] as File).url;
                ]]>
              </fx:Script>
              <s:layout>
                        <s:VerticalLayout/>
              </s:layout>
              <s:BorderContainer id="bc" borderStyle="solid" width="200" height="80%"/>
              <s:Image id="startImage" width="100%" height="100%"
                                             horizontalAlign="center" verticalAlign="middle"/>
      </s:WindowedApplication>

    Thank you answers, but it was not the answer I wanted.
    [Problem]
    * Flash Builder 4.5.1(updater) or Flash Builder 4.6
    - If you have installed on pc, does not work adobe air drag and drop
    [Solution]
    1. Reinstalling the Windows 7 (32bit).
    2. Install Flash Builder 4.5.
    3. Flash Builder 4.5.1 updater and Flash Builder 4.6 does not install.
       (Instead of using Flex SDK 4.6 is set up)
    In addition, Windows7 64bit environment does not work drag and drop.
    Is there another solution?

  • Please help to generate the table from column to rows

    Hello -
    I have one table with more than 100 columns there are 70 column start with HC1.....HC70 (they are not in sequence) and has some value 0 or 1
    Table structure:
    HICN_ID HC1 HC2 HC4 HC5 HC6.................................HC70
    1234A 0 1 1 0 1 1
    3456D 1 0 0 1 0 0
    Now What i want is like this..
    HICN_ID HC
    1234A 2
    1234A 4
    1234A 6
    3456D 1
    3456D 5
    Can you please help me on this
    thanks
    nick

    Please look at the same scenario from the below link.
    You can accomplish this by a "pivot" query. Please look at the small testcase that I prepared below:
    SQL> desc t1
    Name Null? Type
    NAME VARCHAR2(10)
    YEAR NUMBER(4)
    VALUE NUMBER(4)
    SQL>
    SQL> select * from t1;
    NAME YEAR VALUE
    john 1991 1000
    john 1992 2000
    john 1993 3000
    jack 1991 1500
    jack 1992 1200
    jack 1993 1340
    mary 1991 1250
    mary 1992 2323
    mary 1993 8700
    9 rows selected.
    SQL> -- now, try out the pivot query
    SQL> select year,
    2 max( decode( name, 'john', value, null ) ) "JOHN",
    3 max( decode( name, 'jack', value, null ) ) "JACK",
    4 max( decode( name, 'mary', value, null ) ) "MARY"
    5 from
    6 (
    7 select name, year, value
    8 from t1
    9 )
    10 group by year ;
    YEAR JOHN JACK MARY
    1991 1000 1500 1250
    1992 2000 1200 2323
    1993 3000 1340 8700
    SQL>
    Hope that helps.
    Source : http://p2p.wrox.com/oracle/11931-sql-query-convert-columns-into-rows.html
    Thanks,
    Balaji K.

  • PSE newbie frustrated, please help with image resizing

    Hi!
    Tutorials aren't helping me, nor is trial and error. I just want to resize some photos I downloaded to my computer, then upload them to a website to use as my avatar or signature. There are specific pixel dimensions I must adhere to. I want to keep the photo in it's entirety, but when I resize it, it distorts a bit, looks fuzzy...
    I can't figure out what the heck I am doing wrong. Some pictures turn out just fine and others look really bad. I know it can be done because I've seen the same pictures I'm trying to size, being used for the same thing I want to use them for, but theirs are clear, absolutely no distortion whatsoever. The pixel dimensions I have to work with are either 100x100, or 450 pixels wide by 90 pixels high.
    I hope this made sense, I'm not sure how else to word it. Please forgive my ignorance, I've really been trying.
    Thank-you
    B

    For an avatar it’s possibly best to crop to begin with so you get a true square.
    Open the image and select the crop tool and change the aspect ratio to 1 x 1 or 5 x 5 then drag out a square and move the image around inside it or drag the bounding box borders until you have it looking as you want. Then click the green check mark.
    On the top menu click Image > Resize > Image Size and in either the height or width box type 100 px (you only need to type the dimension once the other box will change to 100 automatically. Make sure you have the bottom three boxes checked:
    Scale Styles
    Constrain Proportions
    Resample Image
    With all three checked set the bottom dropdown to Bicubic and then hit OK.
    If you want to apply some sharpening select Enhance on the top menu and choose Unsharp Mask.
    Make sure the Radius is no more than 1.5 and use the amount slider to get the image looking as you want it then save.
    　 

  • Please help - Dreamweaver Image Map Tool/Outlook for Mac

    Hello:
    I was wondering if you could help me navigate through an issue I am having with the image map tool.  I have created a design file is PSD, saved it as a JPG, then transferred it into Dreamweaver to link the design to a web page.  However, I would like to embed different links within one HTML file to e-mail out, so I used the image map tool to do so.  However, when I copy/paste the completed HTML into an Outlook for Mac message (Command A; Command C; Command V), the image map/additional links do not transfer over once the file is pasted in an e-mail.  I also tested this with G-mail and the Apple E-mail app, and was not successful.  Please help.

    You can't paste images into e-mails.  Use absolute links to images hosted on your domain server like this:
    <img src="http://yourdomain.com/images/your_map.jpg">
    See HTML E-mails: what you need to know
    http://alt-web.com/Articles/HTML-Emails.shtml
    Nancy O.

  • Please help with jsp and database!!

    Hello,
    i first created a jsp page and printed out the parameters of a user's username when they logged in. example, "Welcome user" and it worked fine...
    i inserted a database into my site that validates the username and password, and ever since i did that in dreamweaver, when a user logs in sucessfully, it returns the jsp page like its supposed to, only that it says "Welcome null" instead of "Welcome John." pretty strange, huh!? can anyone please help? thanks!
    here is the important part of the code to Login.jsp, and LoginSuccess.jsp: <%@ page contentType="text/html; charset=iso-8859-1" language="java" import="java.sql.*" %>
    <%@ include file="Connections/Login.jsp" %>
    <%
    // *** Validate request to log in to this site.
    String MM_LoginAction = request.getRequestURI();
    if (request.getQueryString() != null && request.getQueryString().length() > 0) MM_LoginAction += "?" + request.getQueryString();
    String MM_valUsername=request.getParameter("Username");
    if (MM_valUsername != null) {
      String MM_fldUserAuthorization="";
      String MM_redirectLoginSuccess="LoginSuccess.jsp";
      String MM_redirectLoginFailed="LoginFailure.jsp";
      String MM_redirectLogin=MM_redirectLoginFailed;
      Driver MM_driverUser = (Driver)Class.forName(MM_Login_DRIVER).newInstance();
      Connection MM_connUser = DriverManager.getConnection(MM_Login_STRING,MM_Login_USERNAME,MM_Login_PASSWORD);
      String MM_pSQL = "SELECT UserName, Password";
      if (!MM_fldUserAuthorization.equals("")) MM_pSQL += "," + MM_fldUserAuthorization;
      MM_pSQL += " FROM MemberInformation WHERE UserName=\'" + MM_valUsername.replace('\'', ' ') + "\' AND Password=\'" + request.getParameter("Password").toString().replace('\'', ' ') + "\'";
      PreparedStatement MM_statementUser = MM_connUser.prepareStatement(MM_pSQL);
      ResultSet MM_rsUser = MM_statementUser.executeQuery();
      boolean MM_rsUser_isNotEmpty = MM_rsUser.next();
      if (MM_rsUser_isNotEmpty) {
        // username and password match - this is a valid user
        session.putValue("MM_Username", MM_valUsername);
        if (!MM_fldUserAuthorization.equals("")) {
          session.putValue("MM_UserAuthorization", MM_rsUser.getString(MM_fldUserAuthorization).trim());
        } else {
          session.putValue("MM_UserAuthorization", "");
        if ((request.getParameter("accessdenied") != null) && false) {
          MM_redirectLoginSuccess = request.getParameter("accessdenied");
        MM_redirectLogin=MM_redirectLoginSuccess;
      MM_rsUser.close();
      MM_connUser.close();
      response.sendRedirect(response.encodeRedirectURL(MM_redirectLogin));
      return;
    %>
          <form action="<%=MM_LoginAction%>" method="get" name="Login" id="Login">
            <table width="55%" border="0">
              <tr>
                <td width="41%">Username </td>
                <td width="59%"><input name="Username" type="text" id="Username" value="" size="25" maxlength="10"></td>
              </tr>
              <tr>
                <td>Password </td>
                <td><input name="Password" type="password" id="Password" value="" size="25" maxlength="10"></td>
              </tr>
              <tr>
                <td> </td>
                <td><input type="submit" name="Submit" value="Submit"></td>
              </tr>
            </table>
          </form>And LoginSuccess.jsp where i want it to print out the "Welcome username
             <%String Name=request.getParameter("Username");
         out.println ("Welcome ");
         out.println (Name); %>

    <%@ page contentType="text/html; charset=iso-8859-1"
    language="java" import="java.sql.*" %>
    <%@ include file="Connections/Login.jsp" %>
    <%
    // *** Validate request to log in to this site.
    String MM_LoginAction = request.getRequestURI();
    if (request.getQueryString() != null &&
    request.getQueryString().length() > 0) MM_LoginAction
    += "?" + request.getQueryString();
    String
    MM_valUsername=request.getParameter("Username");
    if (MM_valUsername != null) {
    String MM_fldUserAuthorization="";
    String MM_redirectLoginSuccess="LoginSuccess.jsp";
    String MM_redirectLoginFailed="LoginFailure.jsp";
    String MM_redirectLogin=MM_redirectLoginFailed;
    Driver MM_driverUser =
    =
    (Driver)Class.forName(MM_Login_DRIVER).newInstance();
    Connection MM_connUser =
    =
    DriverManager.getConnection(MM_Login_STRING,MM_Login_US
    RNAME,MM_Login_PASSWORD);
    String MM_pSQL = "SELECT UserName, Password";
    if (!MM_fldUserAuthorization.equals("")) MM_pSQL +=
    = "," + MM_fldUserAuthorization;
    MM_pSQL += " FROM MemberInformation WHERE
    E UserName=\'" + MM_valUsername.replace('\'', ' ') +
    "\' AND Password=\'" +
    request.getParameter("Password").toString().replace('\'
    , ' ') + "\'";
    PreparedStatement MM_statementUser =
    = MM_connUser.prepareStatement(MM_pSQL);
    ResultSet MM_rsUser =
    = MM_statementUser.executeQuery();
    boolean MM_rsUser_isNotEmpty = MM_rsUser.next();
    if (MM_rsUser_isNotEmpty) {
    // username and password match - this is a valid
    lid user
    session.putValue("MM_Username", MM_valUsername);
    if (!MM_fldUserAuthorization.equals("")) {
    session.putValue("MM_UserAuthorization",
    ion",
    MM_rsUser.getString(MM_fldUserAuthorization).trim());
    } else {
    session.putValue("MM_UserAuthorization", "");
    if ((request.getParameter("accessdenied") != null)
    ll) && false) {
    MM_redirectLoginSuccess =
    ess = request.getParameter("accessdenied");
    MM_redirectLogin=MM_redirectLoginSuccess;
    MM_rsUser.close();
    MM_connUser.close();
    response.sendRedirect(response.encodeRedirectURL(MM_re
    irectLogin));
    return;
    %>
    <form action="<%=MM_LoginAction%>" method="get"
    "get" name="Login" id="Login">
    <table width="55%" border="0">
    <tr>
    <td width="41%">Username </td>
    <td width="59%"><input name="Username"
    ="Username" type="text" id="Username" value=""
    size="25" maxlength="10"></td>
    </tr>
    <tr>
    <td>Password </td>
    <td><input name="Password" type="password"
    ="password" id="Password" value="" size="25"
    maxlength="10"></td>
    </tr>
    <tr>
    <td>�</td>
    <td><input type="submit" name="Submit"
    me="Submit" value="Submit"></td>
    </tr>
    </table>
    </form>
    And LoginSuccess.jsp where i want it to print out the
    "Welcome username
             <%String Name=request.getParameter("Username");
         out.println ("Welcome ");
         out.println (Name); %>When the page is rediredted u r not passing the user name in the query string,so it is not availble in the query string for LoginSuccess page
    Since u have added user in session user this
    <%String Name=(String)session.getValue("MM_Username") ;%>
    <%     out.println ("Welcome ");
    <%      out.println (Name); %>

  • Center image and table in Standard Report

    Team,
    I am having an image and a table to be printed. I use the Standard Report format. Customer's requirement is to make the table columns to be of different widths, center the table and make the image to be of the same size as the table. I have achieved different column widths by customizing the Report Generation VIs. For the next items - centering the table & choosing the image size, I have considered A4 as paper size and set the left and right margins & set the image size accordingly. Now the problem is the customer prefers not to limit the paper size to A4. So is there a way to set the center-alignment to the image & table (instead of me setting the suitable margins to make it appear centered)? There is an alignment control in Append Image to Report VI, but this is not used by the Standard Report. Is there a workaround for this and the table? Any help is greatly appreciated.
    P.S.: HTML report is not an option, since I need the ability to choose a printer and print to it from our software. HTML reports, by default, prints to the printer configured in the default browser, using the margins configured in the browser.
    Thanks,
    Priyadarsini S

    Hi Kamlesh,
    the variation is set to 'do not explode' in the report 1SLK-001 (S_ALR_87013614)
    You can check this  using the following path in transaction GRR3 (library 1VK) report 1SLK-001:
    Menu: Edit -> Variation, you will see that the variation is set to 'Do not explode'.
    This is why navigation between the different reports or variation is not
    available in this report, (the icons are greyed out).
    Iif you wish to have this functionality, then you can copy the report and change
    the variation as follows:
    -> via GRR1 create a copy of the standard report using report 1SLK-001 as
        a reference, ('Copy from'-field).
    ->  in this new report you can then via Edit->Variation change 'Cost Element
         from 'Do not explode' to 'explode', and CO area from 'Do not explode'
         to 'Variation sing. val'."
    Regards,
    Greta

Maybe you are looking for