Please Help PC won't POST

My computer was working fine till this morning, I turned it on and I suddendly didn't get a live signal from my monitor (status light stayed orange,never turned green). All of the computer fans were on and operational and I never got a video signal or post. I restarted and the same thing happened, even as the computer was turned on, the NUMLOCK key didnt even give a green light on the keyboard. I checked my D-Bracket and all lights were red for the exception of the top left corner,which was green. I started to reseat my video card, ram, and even reapplied thermal paste and reseated my cpu. Nothing worked.Im seriously running out of options.
Athlon 3000+ S754 Newcastle
MSI K8t Neo-FSR
Corsair Value Ram PC3200 (2x512)
Maxtor 60GB HD ATA100 (OLD)
Leadtek 6600GT AGP(only 2 days old)
Audigy 2 ZS Platinum
LiteOn 16xDVD Burner
Cooler Master Real Power RS-450-ACLY 450W PSU
Can anybody help? Thanks in advance guys

Did you try a Bios reset? Those boards are getting a bit dated and you may need a new battery now.

Similar Messages

  • Please help - AppleWorks won't open. The icon just bounces in the Dock.

    I have been writing and saving all day on Appleworks. Now when I want to open up an Appleworks file, it won't open up. I tried clicking it from an icon on my desktop, clicking a file from my Recent Items list, and getting one from my hard drive. Nothing opens up. I tried turning off my computer and restarting it and it still will not open any Appleworks file. The Appleworks icon at the bottom bar of my computer just bounces up and down, but nothing opens up. I am able to open my iWorks Pages files without any problem. The bad thing is that I need to get my saved Appleworks files and edit them. Please help... Thanks in advance, Teachermom99

    Welcome to Apple Discussions
    When an application stops working as it should, it's likely due to corrupt preferences. You can follow the steps in this user tip or use the reset function of Dale Gillard's Sidekick.

  • Please help with an Indesign Post Card Problem!

    Greetings!   I am in need of some help!  I am trying to create a post card in InDesign and then send it to a printing company.  I sent my finished product to the company and they stated that it would not work out well.  The font is too small, pictures are too fuzzy, dimensions are off, etc...  I am confused because after reading and researching how to create a 4x6 post card in Indesign, I am still doing something wrong.  Please, please help! Thank you for your time.

    They would like a 4"x6" PDF.  I only need to create the design for the front of the post card, not the back.
    They said:
    "From the PDF send earlier, I see that you are working in Adobe InDesign.
    The document size I believe you are trying to achieve is a postcard 6" wide by 4" tall.
    Please make sure your document size is set up accordingly within InDesign; also make sure it has a bleed edge of 0.125" on all four sides.
    Make sure that your images are 300 dpi, and to size; if you have a small photo and you are trying to enlarge the image may come out "fuzzy.""
    How do I set up my document as a 4"x6" and how do I make sure my photos are 300 dpi?
    How do I upload a screenshot?  Says the image is forbidden.
    Thanks for helping!

  • Please help - iMessage won't work

    So I updated my phone today like I'm sure a lot of you did and I tried going in to activate my iMessage, I've tried it for hours and even reset my phone and it won't work.  I know my id and password are right and my connection to my wifi is good but every time I do it it pops up after about 30 seconds of trying and says "could not sign in. Please check your network connection and try again"
    Someone please help ... What do I do? My date & time thing is already set to on as I previously read.

    If you are having trouble with SMS messages, then you would need to address that with your carrier, unless you are receiving them and just not get a notification. If you have followed the steps I gave you for iMessage and you are not receiving notifications, then check the settings for Notification Center. If you have Messages set to show on the lock screen and play a sound, and display a banner, etc. then your next step is a restore. First restore from a backup, and if that doesn't work, then restore as a new device. Restoring the phone will result in the loss of all data. Make sure you have backed up the phone, synced all content and imported photos to the computer.

  • Please help, CS3 won't run with 10.5.2!  Please!

    Installed 10.5.2 on my g5 dual 2.5 w 4.5 gigs ram (NOT) intel. Now my AE projects won't run. One started to and then quit. This is major for me. Involves dozens of projects. Please help.

    Yes, my powerbook is also trouble-free.
    But it's just too slow to run AE on.
    And yes, yes, I did repair permissions. I did everything including a "safe" starup, repair permissions many many times, etc. etc. etc.
    I'm beginning to think the problem with AE was with non-ae plugins. But then why did automator and software update cease to work?????

  • Please help H55M-E33 no Post with Onboard graphics but...

    Hi i have a H55M-E33 board with a Intel Corei 3 550 Cpu
    I have a ATI HD 5770 installed and everything works fine i am in windows as i post this but the problem is I want to remove the ATI card and use the  integrated graphics on the Corei 3 550
    so I reboot the PC and go into the bios and select onboard graphics as my default selection then shut down the PC
    i then removed the ATI HD 5770 and hooked up a VGA to the back of the motherboard and rebooted I can hear the beep and i can see My HD lights flashing like its booting into windows but my monitor says NO signal
    I then shut it down and removed the vga cable and use just a HDMI cable and still no signal
    What in the world is going on ?
    the first day i setup this pc It worked and the  integrated graphics worked fine but after i wanted to remove this ATI HD 5770 now the  integrated graphics will not boot up
    im going to a smaller case for a DVR setup so i cant use this ATI anymore
    please help me
    Bios version is the latest 1.A released  on 2011-01-26

    Some of the CMOS nonvolatile memory chips are really difficult to clear.  Try doing a clear CMOS as follows:
    1. Pull the power cord or turn of the rear power switch if you have one.
    2. Pull out the CMOS battery (it looks like a coin)
    3. Push the front power switch several times to clear the power caps
    4. Push the clear CMOS button a few times with something like a bent paper clip.  Make sure you feel it click and hold it in a few seconds.
    5. Replace the CMOS battery - make sure the side with the "+" is facing up
    6. Turn on the rear power switch or plug in the power cord.
    7. Hit the front power switch.
    If this doesn't work, you will at least know it's not a clear CMOS problem.  It's actually surprising how many people have to pull the battery before the CMOS will clear.
    - D

  • Please Help--It Won't Work At All!!!

    Today when I was using my iPod, the battery went completely down, to the point where I had to charge it. I plugged it into the computer, and iTunes didn't come up. So I took the USB cable out and plugged it back in. Still didn't work, so I manually brought iTunes up. My iPod is all black, and nothing works. On iTunes, it doesn't give me the option to sync my iPod. The battery is totally drained, so I can't toggle it or reset. Can someone please help me??!!??!!
    Kellie

    Quicktime or Quicktime Pro (which iTunes uses) don't convert "muxed" ( muxed means multiplexed where the audio and video are stored on the same track) video files properly. It only plays the video and not the audio.
    See:iPod plays video but not audio.
    You need a 3rd party converter to convert the file with both audio and video.
    See this for help: Guide to converting video for iPod (Mac/Windows).

  • Dropdown Box in WAD (Please help me as i posted many times,but no infos)

    Hello ,
    I have defined two drop down box one for Plant and other for Material.
    Plant has 14 entries and Material drop down has 100 entried for every plant.
    Now Dropdown Box is assigned with characteristcs info object 0PLANT
        2nd    Dropdown Box is assigned with characteristcs info object 0MATERIAL
    Plant is used as an Compounding attribute of 0material.
    When i select plant 4040 corresponding material numbers will be displayed in dropdown box of material.
    After that i am selecting a material from that dropdown box.
    Now if i change the plant it is not displaying me any values even though there is data for that plant.
    The dropdown box keeps the previous selection and it is not getting refreshed .
    How to solve this issue.
    Please help me!
    Kind regagrds
    Ram
    Points will be assigned

    Hello Rakesh,
    Thanks for the informations,
    But already these options were selected.
    My issues in if i select 1st drop down box and  then select second drop down box the values are displayed.
    Now if i make change in the 1st drop down box the previous selection of the first drop down box was not cleared and because of that it does not show the values in the chart or table.
    i need to solve this issue,
    Please help me with informations
    Lots of thanks in advance
    Kind regards
    Ram

  • Please help - why won't my Ipod songs transfer into new Itunes?

    I have a new Macbook, and want to move all the songs from my Ipod into my Itunes library on this computer. Nothing works. Can someone please help?
    Please note - currently my library is on my crappy HP. But I did read that you can transfer all songs from the Ipod alone (including those not purchased from Itunes).
    macbook   Mac OS X (10.4.8)  
    mac book   Mac OS X (10.4.8)  

    I use an application called Senuti. That transfers all content from your iPod to your Mac, including non purchased content. It's free and easy to use. With your iPod connected to your Mac, launch Senuti and the rest is pretty simple. I would suggest you create a folder on your desktop and set your destination to that folder in the Senuti preferences. Also, it's a good idea to keep everything organized by checking the artist and album boxes in the preferences as well. Like I said, it's pretty easy. Good luck.
    http://fadingred.org/senuti/

  • Please help - FCP won't export using DVCPro HD (or any HD) settings.

    Please help. I'm under a tight deadline to deliver.
    The native setting for both the project and footage is DVCPro HD 720p60 but when I export with this setting, or any other HD setting, whether to a Quicktime Movie or using Quicktime Conversion, the resulting image has thick black lines on both sides of the screen and in the middle.
    I have Quicktime Pro and have already reinstalled FCP to make sure I have all the components. But it's still not working.
    Please - any advice would help.
    Thanks.

    Well, have you done the usual things for when FCP doesn't act right?
    #44: FCP acting weird - Trash Prefs
    Shane's Stock Answer #44: FCP acting weird or unusual. Just not like is normally should
    If the program was working fine, and now isn't, or just isn't working the way it should, the first things to do are:
    1) Trash your FCP preferences. Download the appropriate version of FCP Rescue at http://www.pistolerapost2.com/fcprescue and run it.
    2) Open the Disk Utility and Repair Permissions.
    3) Shut down for 10 min. Go for a quick walk around the block and get SOME exercise today. Come back, turn on the computer and see how things are.
    4) (optional) Do the Hokey Pokey and turn your self about. Results may vary.
    Shane

  • Please help:  iTunes won't import whole songs!

    I have put my old hard drive (which contained all of my music) into my new computer, and added all the tracks into iTunes on the new computer. Unfortunately, some of the tracks cut off prematurely, even though the track shows the correct time (it just goes right to the next track instead of running completely through). Short of manually importing each CD back into iTunes, I'm not sure what to do. Can anyone please help? Thanks!

    Hi thanks. I have try'd installing an older version off a disk that i've got but it get a message telling me it is not possible to install an older version. Will i have to remove the current one 1st? an if so how do i do it like i said i'm a bit off a novice? do i just drag it in to the trash?
    Thanks

  • Please Help! Won't import Garageband tracks into iTunes

    So, i've done this before, but i can't get it to go into itunes now for some reason! Please help if you know anything i coud be doing wrong. I did delete the playlist that it normally goes into in itunes accidentally, how do I get it back?

    Is there a message that comes up when you try to export to itunes? Is there anything specific that is suggesting that it didn't work? Be sure to search itunes first.

  • Please help - iTunes won't start anymore: unknown error -69

    Hello out there,
    please can anybody help me: all of a sudden my iTunes won't start any more - it only shows a message stating an unknown error -69 and then quits.
    I did not change anything on my system before that, so I just don't know what could trigger that...
    I am using iTunes 7.0.2 on Windows XP SP2, both German versions.
    Before posting this question I searched the archives and tried the following, all to no avail:
    1. disabled "safe mode" in QuickTime audio options -> problem remains
    2. set speakers to "stereo headphones" in Windows sound options -> problem remains
    3. deinstalled iTunes, downloaded the installation file again and reinstalled it -> problem remains
    4. deinstalled iTunes and QuickTime, downloaded QuickTime stand-alone version, installed this and afterwards iTunes again -> problem remains
    5. deinstalled iTunes and QuickTime again, deleted all iTunes and QuickTime data folders, reinstalled everything again -> problem remains
    6. ran a CHKDSK an the drive iTunes is on -> no problems found
    It still won't start, always giving this unknown error -69.
    Please, does anybody know what to do?
    Any hints and help are much appreciated!
    Thanks a lot
    and best regards
    Frank
    PC   Windows XP  

    See if this helps: iTunes displays a -69 error when syncing iPod

  • Please Help Phone Won't Turn On!

    I've had my iphone 3G since it came out and it hasn't really given me any problems. Starting Tuesday night it started doing this weird thing, the screen turns white then black and it won't go back on until it turns itself on. Sometimes this lasts longer then other times. Apple told me they would give me an appointment to go to their store. But today for some reason the phone won't go on at all. Please somebody I really need help. Thanks!

    Have you tried a reset:
    Page 34 of the manual:
    "Reset iPhone: Press and hold the Sleep/Wake button and the Home button at the
    same time for at least ten seconds, until the Apple logo appears.
    For more troubleshooting suggestions, see Appendix A, “Troubleshooting,” on page 131. "
    http://manuals.info.apple.com/enUS/iPhone_UserGuide.pdf

  • PLease help: pages won't let me save a document

    My problem: I type a text, hit 'save as' , name the file and trouble starts:
    A window pops up saying it is a locked document or file in use. Of course after
    checking it, none of it is the case, well, theoretical yeah the file is in use as I want to save it (!!!)
    Does anybody know if SL has an issue with the application of pages ?
    I thought there would only be an issue with apple works in that respect.
    I'm not a computer person but appreciate any help with this. I tried to save anything but it won't let me save a document at all...the same window pops up.

    It might be better to post over at the Pages forum.

Maybe you are looking for