Please help printer wont print a legal document

please help me printer wont print legal documents???

Hi,
which printer do you have is it an Officejet, laserjet or a Photosmart?
I work for HP but my posts and replies are my own.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"

Similar Messages

HT3500 I am using Mac 10.4.11 and I am having a problem when my printer wont print what I tell it too. Please Help

I am using Mac 10.4.11 and I am having a problem when my printer wont print what I tell it too. Please Help!

A warm welcome to Apple discussions!
A 2003 iMac cannot support Snow Leopard 10.6; you'd need an Intel processor and that cannot be retrofitted to your Mac. What does "About this Mac" in your Apple menu say for your processor speed? What does it say about how much RAM you have?
If the processor is 1ghz or faster, you can run OS 10.5; otherwise, you are maxed out at 10.4.11.
Also, are you running any commercial ("pay for") anti-virus or security software? They are notorious for slowing most Macs to a fraction of their speed potential.
A too-full hard drive can drag down performance, especially if you don't have a lot of physical RAM installed. If you single-click your hard drive icon and then do command i, you'll see the disk usage. Looks like this:
The value for "Used" should be no more than about 90 percent of "Capacity." In the example image, that drive has about 34 percent of its space used and 66 percent free--more than enough. Please post what you see for your Capacity and Used numbers
There are a few more things we might check but this is a good start.
Awaiting your information,
Allan

I'm trying to setup a printer go wireless through my airport extreme, but every time I try to print the printing file gets paused. I'm in loop. PLEASE HELP! (The printer is a Brother 7020 monochrome)

I'm trying to setup a printer go wireless through my airport extreme, but every time I try to print the printing file gets paused. I'm in loop. PLEASE HELP! (The printer is a Brother 7020 monochrome)

I had the exact same problem
It turns out I was using a 20 foot USB cable between the printer and the Airport Extreme and the signal had become to weak to work. Try using nothing more than a 6 foot cable or try a new cable

Please help me in Printing a text file :-(

Hi,
I have asked this question 3 times, but I didnt get any reply. Can someone please help me in printing a text file to a printer using java. I am able to print it but the problem is the whole file is printed in a messy way. Is there any method in java that prints the text file exactly how it is?
Thank u very much.

JavaWorld has a series of articles on how to print using Java: http://www.javaworld.com/javaworld/jw-10-2000/jw-1020-print.html

Please help : How to print a matrix from the console...

Hi..
Please help:
How to print a matrix on the console , but i want to take all the input from the console.. like...
if the matrix is of size...
mxn
where
m : row
n : column
and the all the elements of the matrix from the console it self... .
Please help...

Thanks...
I am able to print the elements of the array but i am not able to assign those values to the array ....
How to do that...
I just did a little change in my code...
import java.util.Scanner;
public class CreatingAMatrix {
    public static void main(String[] args) {
     // TODO Auto-generated method stub
     System.out.print("Enter the number of rows: ");
     Scanner scanner1 = new Scanner(System.in);
     int m = scanner1.nextInt();
     System.out.print("Enter the number of coulmns:");
     Scanner scanner2 = new Scanner(System.in);
     int n = scanner2.nextInt();
     System.out.println("The size of the matrix is : " +m+" x "+n );
     int[][] a = new int[100][100];
     for(int i=0;i<=m;i++)
         for(int j =0; j <= n; j++)
          Scanner scanner3 = new Scanner(System.in);
          int o = scanner3.nextInt();
         System.out.println();
     for(int i=0;i<=m;i++)
         for(int j =0; j <= n; j++)
          System.out.print(a[i][j] + "\t");
         System.out.println();
}I am getting an output as this
output:
Enter the number of rows: 2
Enter the number of coulmns:1
The size of the matrix is : 2 x 1
1
2
1
2
3
5
0     0
0     0
0     0
how should i assig those input values to my array..
Please help

My printer wont print because I can't find the right password on (re)set-up. What should I do?

I"m running windows 8 (I think) and my printer wont print from my computer on the wireless function. I've tried uninstalling and reinstalling the software and updatuing but none of this seems to help. What should I do now.

Hi @mfk8
I am not sure I understand, what password are you looking for? Is the printer still on the wireless network? Perhaps the following document will be helpful; 'Printer is offline' Message Displays on the Computer and the HP Printer Will Not Print.
I look forward to hearing back from you.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

HP ENVY 4500 Printer Windows 10 printer wont print

I have a HP ENVY 4500 all in one printer. I did the windows 10 inplace upgrade.Now th printer wont print. I dont think this is a driver issue.I get an error saying the printer is off line. My WIFI is connected and working great.When I look at internet connections in my area My printer shows up on that list,and ask for a security code. I think it asking for a password for the printer.I have never set one up. (FYI) I had been using this printer with Windows 8.1 andIt worked great before the windows 10 upgrade. Do I need to set up a password for this printerTo make it work. By the way This computer is a Dell Insperon about a year and a half old.I need to print Please Help.Thank youEarl

I managed to fix this issue by myself.
After hours of trying everything HP suggested on other forums with no avail I simply turned everything off (including the PC and Printer) and left it for half an hour.
Then I turned the printer on but turned the wireless off. I then tried to print the same document from the PC (which came up with an error saying my printer needed a connection to complete) turned the wireless back on via the printer and it works!
Quite disappointed I seem to be having so many problems with the ENVY after all its recommendations, hopefully the issue will not return.

HP DeskJet Ink Advantage 1515 printer wont print after replacing black ink cartridge

Hello.
My HP DeskJet Ink Advantage 1515 printer has been working correctly since a year.
I had to replace both ink cartridges and I changed only the black one since I needed that one most.
But, the lights keep flashing and the printer wont print. Please help?

Hi @RRGS,
Welcome to the HP Forums!
I see that your HP DeskJet Ink Advantage 1515 printer will not print after replacing black ink cartridge, and your lights are still flashing. I am happy to help!
What lights are flashing on the printer?
In the meantime, please see this guide, Blinking Lights on the HP Deskjet 1510 and Deskjet Ink Advantage 1510 Printer Series.
Hope this guide helps!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Canon printer wont print PDF and Word files... sometimes.

I face a very special problem with my iMac and my Canon printer (Pixma MG5350): Since a few weeks, the printer wont print most PDF files correctly, the same with existing Word files. A blank or blurred sheet is coming out of the machine. But: When I create a brand new Word file and fill it with text, the printer prints it clean and neat. The same with the official Canon test prints – no troubles at all. I have also tried to sort out the problem with the help from Apple: http://support.apple.com/kb/TS3147?viewlocale=de_DE, without success. Glad about every help!

My next suggestion would be to try an alternate driver to the Canon.
There is the Gutenprint v5.2.9 suite which is free and lists the MG5300 series as a supported model. You could download and install this driver suite and add the Gutenprint MG5300 driver and see if this gives you the same problem.

Please help me P M Module configuration document.

Hi friends,
I am planing to learn SAP PM Module, I want know process wise flow, please help me P M Module configuration document.
Regards,
Murali.
help.sap.com

Lynn
Had me stumped for a while too ...
On the screen that presents all your "Blank" documents, simply touch the word "Blank" under the preview (not the actual preview) and you'll get a dialogue to name your document.
Simon

Printer wont print word documents

I have had my printer/scanner for nearly a year now, it seems to print anything except a word document. I have both word 13 and notebook on my system. It wont print from either program, I am wondering whether this printer comes with these programs in the softwear? If yes any ideas how to sort the problem?

Hello sasaone2one,
Welcome to the HP Forums.
I see that you are having some issues when attempting to print from Word.
Have you by chance checked to see if any updates are available for Word? Not having all the updates can cause the printer not to function on Word documents.
I also suggest that you try the following link for the HP Deskjet 2540 series Firmware Update.
Feel free to write me back at any time if you have any other questions or concerns.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Please help can't print in colour

I have a deskjet 2542 and I cannot print in colour as it does not provide it in a the setting but i have coloured ink and in the test print it can print in colour. Please help!

Hey @clairekog ,
Thank you for joining us on the HP Forums today, hope you enjoy your time with us!
I understand you are not given the option to print in color on your computer.
Please answer the following programs;
1. What program are you trying to print from?
2. Are you adding color to the document?
3. Where are you looking to change the color setting that isn't letting you?
4. What Operating System are you using? Press the link to find out, in case you don't know already. http://whatsmyos.com/
Have a great day! Look froward to hearing back from you.
I worked for HP.

Please help about Report Printer and PS tables-objects . ..

Hi everybody
I'm in trouble. I have a requirement in PS módule related with reports created by the Report Printer tool. I don't have any idea about these topics.
My requirement is to create a report (not with Report Printer) with the structure for projects, with all the structure Project-WBS-Network-Activity and with some values like Budget, Commit, Actual, Paid, etc.
The functional consultant only tells me about some reports created with Report Printer wich have the columns required, some report has the Budget, other one has the Commit, etc. For example, one report is the tcode S_ALR_87013532; i don't know if this transaction exists in all the SAP implementations or if it was created only for my company.
These reports only show two levels (Project-Network) so i i have to investigate:
1. How to get all the structure levels (project-WBS-network-activity)
2. How to 'translate' in code some value showed in a report created with Report Printer, i guess these values are created with formules and objects.
3. How to get the same values showed in these reports, but for the Networks and Activities.
I do not know anything about PS module and Report Printer and i really don't have any idea about how to make my development.
4. I think the functional consultant could be able to create the report himself with the Report Printer, but he tells me he does not manage this tool so good and he wants to send SAP mails with the reports, and he say the reports created with Report Printer can not send mails. Is this true ? and then, would be easier for me to learn Report Printer and create the report myself instead to develop it ?
Does somebody can help me ? Any idea ?
Please help !! I don't know even how to start with this.
Thanks in advance ..
Frank

Hi Frank,
here're some links:
-http://help.sap.com/saphelp_47x200/helpdata/en/ca/01993862b47c67e10000009b38f8cf/frameset.htm
-http://www.sapgenie.com/abap/tables_ps.htm
-Re: Project System Costs: budget/actual/commt/rem.plan/assd
Andreas

Printer wont print. have new ink. trouble help say it ok but its not ok

I HAVE A HPPHOTO SMART C5180 ALL IN ONE PRINTER. IT JUST STOP PRINTING SO I CHECK THE INK REPLACE IT WITH NEW INK AN NOW IT JUST WONT PRINT I TROUBLE SHOOT IT AN IT SAY ITS OK BUT IT STILL DONT PRINT . I ALLSO REPLACE IT WITH NEW PAPER AN IT STILL DONT WORK

If resetting the que fails try deleting the printer and reinstalling (delete and allow your mac to find it again). This has worked for me in the past when I had trouble with the que.
If that fails you can search the HP website for a OS-X compatible driver for this printer model and try using that instead of the pre-installed driver selected by OS-X.
Good luck. Let us know how it turns out.

PLEASE HELP! Lexmark printer won't work!

I just upgraded to snow leopard today and I'm already having some big problems. The worst of them is that my Lexmark X1185 won't work anymore. It used to work fine in leopard, but since I upgraded, I can't scan, print or do anything else.
Here's what I tried to do to solve the problem:
1. Tried to reinstall it from the manufacter CD (that didn't work cause snow leopard would crash every time I tried to open this CD).
2.Deleted the printer in "Print and Fax System" under system preferences, and then added my printer again (also didn't work).
3. Tried to look for drivers (the latest driver to the Lexmark X1100 series, wich my printer belongs, was for Tiger. It also didn't work.
Also, when I turn on the computer, I get this error message: “/Library/StartupItems/LexSleeperX.app” has not been started because it does not have the proper security settings."
Any ideas on how to solve this problem? I urgently need my printer....
Edit: I'm running 10.6.1, my Mac is an aluminum iMac, 2.4Ghz, 1Gb RAM
Message was edited by: iMacPodshuffle

/usr/libexec/cups/backend/usb failed or Missing USB Class Driver
I have been experiencing the same issues printer there but no one home!
I have spent 6 (yes 6) hours on the phone to Lexmark today, they advised that it was due to the format of my Hard Disk not supporting their drivers. Apparently they do not support Mac OS Extended (Case-sensitive, Journaled) which means I will need to reformat the hard disk correctly to not be Case Sensitive. Apparently this will affect any driver installed.
To find out if this is the case go FINDER > Go > Utilities > Disk Utilities (look bottom left FORMAT) I don't have any other solution to this. Spoke to Apple and they said if thats whats suggested by Lexmark then thats what needs to be done! Good Luck

Please help printer wont print a legal document

Similar Messages

Maybe you are looking for