Please Help. Problem Assigning Datasource

I created a test Master data Infoobject abc_xxx and loaded data and then after testing deleted it. Now when I am trying to assign  a new datasource to an existing Infosource from where I loaded data into the test Infoobject , I am getting error message that there there is no InfoProvider or data target named abc_xxx.
Could anybody please help me out here?
Thanks in advance.

I am getting error message that there "there is no InfoProvider or data target named abc_xxx(name of Infoobject)"
If you are not trying to use this infoobject, the above message should not appear at all.
Please follow the following steps to assign a source system.
1. Goto Source Systems and check the source system u want to use is in Active state.
2. right-click on ur InfoSource -> Assign Datasource
3. from the drop-down, selet ur source system
4. choose a datasource if the source is r/3
5. modify/change transfer structure/comm structure/transfer rules
6. save n activate.
Hope this helps.

Similar Messages

  • Premiere Pro CS5: please help problem with importing a file error output "there was an error decompressing audio or video"

    please help problem with importing a file error output "there was an error decompressing audio or video"

    this is related to what adobe program/version?

  • Please help: problem configuring a SQL server datasource in Websphere.

    I am using Rational Developer 6 and its integrated testing server (websphere v6). When configuring a data source for SQL server, I did the following steps in admin console of the test server:
    1. Created a JDBC provider, using WebSphere embedded ConnectJDBC driver for MS SQL Server;
    2. Created a datasource under the previously created JDBC provider, filled in the server name, DB name and port number (1433 for SQL server);
    3. Created a J2C authentication alias that has the login info of SQL server;
    4. Assigned the created J2C alias to both component and container managed authentication alias;
    However, when I click "Test Connection", it always gets back to me with an error "java.lang.Exception: java.sql.SQLException: [IBM][SQLServer JDBC Driver]Error establishing socket. Connection refused: connectDSRA0010E: SQL State = 08001, Error Code = 0.".
    My ultimate goal is to configure a SQL server datasource so that I can configure Kodo to use this datasource.
    Can some one please help? Thanks in advance.

    Try this:
    http://www-1.ibm.com/support/docview.wss?uid=swg21210871
    I am yet to test this. I am going to download latest SP for SQL Server 2000 and install it. I hope it will do the magic.

  • Please help with assigning user to a group in AD using dbms_ldap

    Dear gurus of Apex and LDAP!
    Please help me a bit.
    I managed to create any user in AD from Apex using dbms_ldap package and set many of his attributes. But I cannot set that my user belongs to specific group, let's say MY_GROUP. I guess the name of attribute for group is 'member' or 'memberOf', so I tried them both in the same way as I've done for other attributes:
    v_vals(1) := 'MY_GROUP';
    DBMS_LDAP.populate_mod_array(v_array, DBMS_LDAP.MOD_ADD, 'member', v_vals);
    I've got LDAP client/server error: CONSTRAINT violation. 000020B5: AtrErr: DSID-031516FC, #1: 0: 000020B5:
    DSID-031516FC, problem 1005 (CONSTRAINT_ATT_TYPE), DATA 0, Att 1f (MEMBER)
    v_vals(1) := 'MY_GROUP';
    DBMS_LDAP.populate_mod_array(v_array, DBMS_LDAP.MOD_ADD, 'memberOf', v_vals);
    I've got LDAP client/server error: DSA IS unwilling TO perform. 0000209A: SvcErr: DSID-031A0929, problem 5003 (WILL_NOT_PERFORM), DATA 0
    After that I've tried to extend group name to string, which is shown in LDAP browser for attribute 'memberOf' (when I've added it manualy):
    v_vals(1) := 'CN=MY_GROUP,OU=GROUPS,OU=Allianz,DC=allianz,DC=com';
    DBMS_LDAP.populate_mod_array(v_array, DBMS_LDAP.MOD_ADD, 'member', v_vals);
    I've got LDAP client/server error: OBJECT CLASS violation. 0000207D: UpdErr: DSID-03150913, problem 6002 (OBJ_CLASS_VIOLATION), DATA 0
    v_vals(1) := 'CN=MY_GROUP,OU=GROUPS,OU=Allianz,DC=allianz,DC=com';
    DBMS_LDAP.populate_mod_array(v_array, DBMS_LDAP.MOD_ADD, 'memberOf', v_vals);
    LDAP client/server error: DSA IS unwilling TO perform. 0000209A: SvcErr: DSID-031A0929, problem 5003 (WILL_NOT_PERFORM), DATA 0
    I've also tried some other variants (without 'CN=' and without 'OU=GROUPS,OU=Allianz'), but still no success.
    Search of this forum and even google didn't help either :(
    Please, help me to find the correct syntax for it or tell me if it's not possible.
    Thanx in advance,
    Vladimir

    Vladimir ,
    firstly the attributes member and memberOf are special attributes in AD having a set of predefined values. Hence an error will be thrown if you try to assign them values like 'MY_GROUP'. There are two basic solutions to this problem : Either you define an OU in your AD which will act as your 'MY_GROUP'. This is a quick fix solution and is not robust at all. The other solution is to add your own property in the tree , something like 'roleCode', you can then assign it any value you want.
    But the problem now is, AD does not allow addition of new attributes in the structure. You have to use ADAM in for this and you can specify a common linking mechanism between AD and ADAM now such as email address can act as the link between both the directories.
    Hope this helps
    Shantanu

  • , please help problem downloading apps since update

    Why can't i download apps since i updated to i06, i  log in with password .am then asked for three security questions fill this out click done and get the answer timed out try again, what is causing this please help.

    Settings>General>Reset (at the far bottom)>Reset All Settings
    That will ALWAYS work for the "3 Security Questions - Timed Out problem".  No data will be lost, but your network settings will be reset.

  • Saving Search Help - Problem assigning package

    Hi,
    I have developed a ALV report, Where I have used only one 'Z' table. I want to create search help for a particular input field  in the selection screen.
    I tried to create search help in se11.
    After giving all the required information, I am not able to save it under any package at all.
    It gives an information saying, Search help cannot be assigned under this package.
    I have tried it under many packages and also tried to save it as a local object, But no go.
    How can I save and activate this ?
    Please help !
    Thanks in advance
    Edited by: Matt on Sep 5, 2011 6:40 AM

    Hi
    I think you created search help name not starting with Y or Z, but with SAP reserved names. Because of this you are not able to save by assigning a package and TR.
    Please change the same to starting with Y or Z.
    Custom Search Help
    Shiva

  • Please help - problems with iPod Nano

    I saw a page in my Popular Science magazine and it had iPod Linux. So I went to the website installed it, and it worked!!! But the problem is , is that when I plug it in to my computer, it charges but won't show up as a drive. Please help!!!!!!!!!!!!!

    Even within the iPod Linux Project the Fifth Generation iPod and the Nano are unsupported hardware so you are pretty much on you own, however check these links out:
    iPod Linux Unsupported - What if Something Goes Wrong
    iPod Linux Project- My iPod is really messed up, how can I fix it?

  • Please Help: Problems w/Frames and Rollovers

    I've been having a problem recently w/making rollovers in
    Fireworks 8. Whenever I change the color of the text (intended to
    be made into a rollover link) in one frame, it changes the color of
    that text in all of the frames. I've never had this happen in the
    previous software version. Please help! Thanks!

    PSparky wrote:
    > I've been having a problem recently w/making rollovers
    in Fireworks 8. Whenever
    > I change the color of the text (intended to be made into
    a rollover link) in
    > one frame, it changes the color of that text in all of
    the frames. I've never
    > had this happen in the previous software version. Please
    help! Thanks!
    Make sure that Share Across Layers, and Share Across Frames
    are unchecked.
    Linda Rathgeber [PVII] *Adobe Community Expert-Fireworks*
    http://www.projectseven.com
    Fireworks Newsgroup:
    news://forums.projectseven.com/fireworks/
    CSS Newsgroup: news://forums.projectseven.com/css/
    http://www.adobe.com/communities/experts/

  • Please help, problems running recovery

    hi, i have a satellite P755-S5262 RUNNING WINDOWS 7 64BIT WITH AN i7 PROCESSOR
    when i first got my laptop i was having some minor problems with it so i did a restore from the harddrive and that fixed things up. i made some recovery media and the went about setting it up, the made a backup with nere back it up 11.  later on more problems and i tried to restore from nero back up and backup didn't work so i tried recovery and it won't recover from the hard drive but my recoverey media worked and everything was fine.  so one late sleepy night 
    i triede to install some free software which didn't work so i uninstalled it using REvo uninstall and made a bad mistake, windows would not boot. most of the repair options, including toshiba recovery were not coming up.
    i had my media but after inserting disc one it said files were loading and the nothing happened.  anyway i finally got
    recoverey to come up but after choosing out of box recovery with partitions the same i got thew message preparing partitiuons and the error 08-0E89-0000 PARTITION preperation failed
    please help!

    If the problem is with the recovery media, ordering replacement recovery media might be able to help.
    If that doesn't work, it could be a failing hard drive.
    - Peter

  • Please help,problem when creating Jar.

    I am somewhat new to Java...But I made a simple program,and then tried to create a Jar file.
    Now all my Java commands where in /program files/Java/JavaSDK/Bin,it was a hassle to CD to that everytime I wanted to use a command,so I coppied all the commands in BIn directory,and put them in System 32,I suppose this is ok? That was my first question.
    My next one is,when i try creating a Jar file..I suppose I am doing ti right,but the entire command prompt fills up with code,the ASCII and all the symbols....and a REALLY loud constant beep comes from my computer,and speakers..and it seems it doesnt create anything by this code in the screen and th noise..
    Please help.

    My next one is,when i try creating a Jar file..I
    suppose I am doing ti right,but the entire command
    prompt fills up with code,the ASCII and all the
    symbols....and a REALLY loud constant beep comes from
    my computer,and speakers..and it seems it doesnt
    create anything by this code in the screen and th
    noise..It is from jar help:
    Example 1: to archive two class files into an archive called classes.jar:
    jar cvf classes.jar Foo.class Bar.class
    Example 2: use an existing manifest file 'mymanifest' and archive all the
    files in the foo/ directory into 'classes.jar':
    jar cvfm classes.jar mymanifest -C foo/ .

  • Please help : Probleme freeze Adobe Média Encoder CS 4 with 720P YUV setting

    I work on editing movie : YUV 1280/720p 25i 48khz 16bits... (24 minutes - 68go)
    lastest versions of premiere pro - media encoder - after effect on my pc (quadcore, 4Go, 4x1T hardrives)
    Work on Vista SP1 SP2
    Media encoder always freeze. When i clicking starting queue... I can't export movie.I try on several stations.. Same problem. I try on several projects...same problem...
    Somebody can help me ?
    I have the same probleme everytime.
    Premiere pro play the movie very well , not problem... but after that always média encoder... freezing...
    If someone can help me please.

    i reinstall, nothing change..
    i try to close caption the movie adding titles on master...i try to export..
    same problem...
    Just a bit crazy
    Manuel Liminiana
    Mac Guffin Production
    www.mac-guffin.net - [email protected]
    06 75 38 21 43
    Centre Factory
    www.ecole-factory.fr - [email protected]
    04 37 48 00 21
    2009/10/31 Jim Simon <[email protected]>
    Yeah, that seems like a freeze.
    >

  • Please help - Problem with loading swf's (running very slowly)

    Hi
    I have posted this problem up in the last few days so I built a quick demo of my problem. Can somebody please download it and take a look at it and see what I'm doing wrong?
    You can download it here at:
    http://www.bounceworld.ie/download/Demo_Test.zip
    The external swf's when loaded.....run very very slow; sometimes unresponsive as if there is a script running in the background. I'm using keyboard commands to navigate through the screens - eg:
    on (keyPress "<Space>") {
    gotoAndStop("scene02", "firstframeLabel");
    Thank you for your help!!!!

    Hi
    I'm trying to use Key Listeners to solve my problem.
    I don't know much about key liseners so can somebody help me out.
    I have the following on a keyframe yet it still wont jump to the certain frames when I press the relevent keys. Am I missing something?
    stop();
    KeyListener = new Object();
    KeyListener.onKeyDown = function() {
    if (Key.getAscii() == 38) {  // UP key
    gotoAndStop(89);}
    if (Key.getAscii() == 40) {  // DOWN key
    gotoAndStop(91);}
    if (Key.getAscii() == 37)  // LEFT key
    gotoAndStop(88);}
    if (Key.getAscii() == 32) {  // SPACEBAR key
    loadMovie("application_01.swf", "container");}

  • TS2570 My Mac stays stuck on the grey screen. Doesn't boot up. I've tried everything the shift key to safe boot still doesn't boot. I've tried the option key n only has one option to go into. please help. problem Is I bought off a friend so I have no disk

    My Mac stays stuck on grey screen. I've tried the option key. The shift keys. Nothing helps. The problem is I bought the computer off a friend and I don't have any disks. Any suggests would be great..

    Can you see a serial number anywhere? Don't post it here, just let me know if if you have it.

  • OS 10.6 - Please help - problem restoring system from time machine!

    Hi there,
    Today I installed a little program to convert flac audio files to mp3. When I ran the program the computer froze, so I rebooted but then I could move the cursor but not click on any menus or icons on the desktop, they just wouldnt respond - so basically I couldnt use the computer. After re-booting a few times with the same result I decided to reinstall the system using time machine from an external hard drive. I reinstalled OSX, then reinstalled Snow Leopard, then reinstalled the system from a previous save from Time Machine. It said the installation was successful, but when the computer restarted a message comes up saying "You need to restart your computer. Hold down the Power button until it turns off, then press the Power button again". Ive done this about 5 times now but it always just says the same message without starting properly. WHAT DO I DO???? I really need to use my computer tomorrow so any help is hugely appreciated!!! TIA
    PS. i have done a hardware test in "loop mode" and it says everything is fine

    HiDef Jules wrote:
    Hi there,
    Today I installed a little program to convert flac audio files to mp3. When I ran the program the computer froze, so I rebooted but then I could move the cursor but not click on any menus or icons on the desktop, they just wouldnt respond - so basically I couldnt use the computer. After re-booting a few times with the same result I decided to reinstall the system using time machine from an external hard drive. I reinstalled OSX, then reinstalled Snow Leopard, then reinstalled the system from a previous save from Time Machine.
    how exactly did you reinstall the system from TM? please give details. the correct way to do it is to boot from the snow leopard DVD and use the "restore system from backup" utility in the Utilities menu. there is no need to reinstall anything prior to using that utility. the restore utility wipes your hard drive and restores it to the state it was in at the backup time.
    It said the installation was successful, but when the computer restarted a message comes up saying "You need to restart your computer. Hold down the Power button until it turns off, then press the Power button again". Ive done this about 5 times now but it always just says the same message without starting properly. WHAT DO I DO???? I really need to use my computer tomorrow so any help is hugely appreciated!!! TIA
    PS. i have done a hardware test in "loop mode" and it says everything is fine

  • Please Help: Problem Playing Songs Imported from CD's

    I know this question has probably been asked before but I have yet to find an answer to help me fix my problem. When I upload songs from a CD to itunes they won't play. It skips over them. There isn't any wierd symbols next to the song that says that there is something wrong and I am not getting any error messages. The only thing that is wierd is under time it says "not available". I am really bad at using computers and any responses will be greatly appreciated.
    P>S> I have windows 2000 but my computer used to have windows XP.

    Aloha,
    Just a suggestion since I've had a similar problem which has taken me weeks to fix! What happened was the iTunes library files got trashed somehow, but the music was still there! Use Windows Explorer ( run explorer.exe ) and look at My Documents\My Music\iTunes\iTunes Music\ and see whether your music is still there or not. If it is, you're going to have to reimport each album from within iTunes by clicking on File, Import Library, which will bring up a window...browse to the iTunes Music Folder and click on each album...a real pain, but it works! This may leave you with a lot of duplicate songs in your music library which will have " ! " exclamation marks next to them ...they have no links...which you'll have to delete manually ( just the ones with the ! next to them ).
    It's important that you back up the two files, iTunes Music Library.xml and Itunes Library.itl every day!!! ( and find some easy way to do it...I not only use an auto backup, I actually copy and paste them into a 'saved' folder. Without them, your iTunes music is ..um..useless!
    Hope this helped.
    DRDRJAY
    Kailua-Kona, Hawai'i

Maybe you are looking for