PLEASE HELP-PROBLEM IN DATA LOADING
Hi,
I had made a repair load for 5 records from a source ods to target ods.After Repair load I found 3 records are correct but 2 still missing . I made again repair load but data was again missing. All the 5 records share the same conditions...Plz tell me what can be the reasons that 3 are correctly loaded and 2 could not. What Can be the solution for them???
Please reply!!1
hi,
have you chked in source ods active table for the presence of 5 records which you require.
if so do the full repair upto PSA and chk its presence in the PSA.
then load to ods and chk in new data table then activate the ods and chk
so you could findthe records where it is missing.
Ramesh
Similar Messages
-
Problem in data loading through UD Connect.
Hello All,
i have problem in data loading...I have created the UD connect source systen and its working properly,then i have created UD Connect InfoSources and DataSources, But when i am trying to create Infopackages then its giving following error..
"Error occurred in the source system" and "no record found".
Thanks
ShivanjaliHello Shivanjali,
Mostly UDC is used for RemoteCube to access data outside of SAP. What is your external system? Make sure that there is data in the source system.
Please check following links
[Transferring Data with UD Connect|http://help.sap.com/saphelp_nw04s/helpdata/en/43/e35b3315bb2d57e10000000a422035/frameset.htm]
[SAP BW Universal Data Integration SAP NW Know-How Call|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f094ba90-0201-0010-fe81-e015248bc5dd]
[SAP BW and ETL A Comprehensive Guide|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/11e1b990-0201-0010-bf9a-bf9d0ca791b0]
Thanks
Chandran -
Need Help about Spatial Data Load - Mapviewer
Hello everybody,
I need an immediate help about spatial data load. I installed Oracle mapviwer quick start and try to work on it. However, I could not pass the load step. My questions are;
1- Where can I find and download my country's data set (spatial data)
2- With mapviwer, how can I load spatial data to my tables on database (Oracle). Those tables have sdo_geometry columns and I want to query location data, but could not load
Regards,
DilekFor Mapviewer questions, please post in the following forum:
MapViewer
Thanks -
please help problem with importing a file error output "there was an error decompressing audio or video"
this is related to what adobe program/version?
-
Problem in data loading in 0PM_DS05 using data source 0PM_MEASUREMENT
Hi Gurus,
I have to load data in OPM_DS05 ODS using 0PM_MEASUREMENT data source.
Now the problem what I am facing is, there is a field equipment number which was there in data source but not mapped to infoobject then I mapped that field
EQUNR(R3 field) to 0EQUIPMENT(BI infobject) after this when I try to load data error is comming and when I check the dump I understand that there is some routine written in update rules which refers master data of 0EQUIPMENT thus what I got is I have to load master data first then the ODS but when I load master data then request is not comming in the ATTRIBUTES 0EQUIPMENT.
I am using 0EQUIPMENT_ATTR data source to load data to 0EQUIPMENT.
Please help me out from the situation what should I do and also suggest whether it is necessary to load master data for 0EQUIPMENT.
Your efforts will be appreciated.Hi,
in generally it is always a good idea to load the master data first. In your case there are still some questions.
a) did you activate the master data after loading?
b) what kind of short dump are you getting while loading the transactional data?
c) what is the routine doing?
I guess your loading issues are more related to the routine than anything else.
regards
Siggi -
, please help problem downloading apps since update
Why can't i download apps since i updated to i06, i log in with password .am then asked for three security questions fill this out click done and get the answer timed out try again, what is causing this please help.
Settings>General>Reset (at the far bottom)>Reset All Settings
That will ALWAYS work for the "3 Security Questions - Timed Out problem". No data will be lost, but your network settings will be reset. -
Hi all,
We have actually installed some patch in R/3 system. so now we are testing BW3.5 system whether the full and delta loads are working or not.
Full loads are not having any problem but few delta loads are having problems . what we did is -
1) Re- initialize the delta loads .
2) Put/ change some records in R/3 system
3) Schedule delta loads in BW .
But 0 records are coming in BW though in R/3 the records are present.
Kindly help.Hi
You mentioned that no recorde are moved to BW.
1) Did you check in R/3 side weather the data is in RSA7 or not?.
2) If not check in SM13 (V3) and lBWQ(Qued Delta).Activate the data source.
3) Replicate the datasource in BW and
4) Run the Program RS_TRANSTRU_ACTIVATE_ALL in SE38.
5) Perform data Loading.
You can get data in this way.
I think this will help you.
Regards,
Siva -
PLEASE HELP:not able to load a simple servlet
Hi,
I'm new to weblogic server.I'm trying to setup weblogic 510.Everything was
going fine until I got stuck to this small thing.I'm not able to load a
simple servlet!.
I would appreciate any pointers regarding this.Please Help me!!!
Here is what I tried:
I have installed weblogic510 plug-in for IIS.I could successfully run jsp
files.However I am not able to load simple servlets;It gave an exception
"java.lang.IllegalAccessError: try to access class
weblogic/utils/classloaders/FileSource from class
weblogic/servlet/internal/WarClassFinder"
Details of my configuration:
WebServer - IIS 4.0
IIS port=80
Weblogic port=7001
I had set it in such a way that all the requests first go to IIS and then
IIS redirects them to Weblogic.I've followed the steps according to the
document "Installing the Weblogic ISAPI Plug-in".
I've registered the servlet in weblogic.properties as following:
weblogic.httpd.register.hello=examples.servlets.HelloWorld2
I tested the servlet by URL http://localhost:7001/hello
Following is the eact text for the exception I got in the WeblogicServer
window:
Mon Jul 24 12:13:13 PDT 2000:<E> <ServletContext-General> Error loading
servlet:
examples.servlets.HelloWorld2
java.lang.IllegalAccessError: try to access class
weblogic/utils/classloaders/Fi
leSource from class weblogic/servlet/internal/WarClassFinder
at
weblogic.servlet.internal.WarClassFinder.getSource(WarClassFinder.jav
a, Compiled Code)
at
weblogic.servlet.internal.WarClassFinder.getClassSource(WarClassFinde
r.java:110)
at
weblogic.utils.classloaders.GenericClassLoader.findLocalClass(Generic
ClassLoader.java:381)
at
weblogic.utils.classloaders.GenericClassLoader.reallyLoadClass(Generi
cClassLoader.java, Compiled Code)
at
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader$Slave.
loadClass(RecursiveReloadOnModifyClassLoader.java:234)
at
weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClass
Loader.java:146)
at
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader.findLo
calClass(RecursiveReloadOnModifyClassLoader.java:109)
at
weblogic.utils.classloaders.GenericClassLoader.reallyLoadClass(Generi
cClassLoader.java, Compiled Code)
at
weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClass
Loader.java:172)
at
weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClass
Loader.java:146)
at
weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubI
mpl.java:291)
at
weblogic.servlet.internal.ServletStubImpl.getServlet(ServletStubImpl.
java:164)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:99)
at
weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletCon
textImpl.java:742)
at
weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletCon
textImpl.java:686)
at
weblogic.servlet.internal.ServletContextManager.invokeServlet(Servlet
ContextManager.java:247)
at
weblogic.socket.MuxableSocketHTTP.invokeServlet(MuxableSocketHTTP.jav
a:361)
at
weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java:261)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled
Code)
Mon Jul 24 12:13:13 PDT 2000:<E> <ServletContext-General> Servlet failed
with Ex
ception
I dont think there were any problems in the classpath or
servletpath;Basically WeblogicServer was able to locate the servlet but when
it tried to load the servlet it gave this exception.
I would appreciate any ideas/suggestions.
Thanks,
SravanNice to hear it works!
However, one mistake you have in the configuration you provided:
You put D:\weblogic\BDL\servletclasses in both CLASSPATH and
weblogic.class.path, remove it from CLASSPATH.
Cheers - Wei
Sravan Thella <[email protected]> wrote in message
news:[email protected]...
Hi Michael and Wei,
Thank you very much for the response.
My servlet details:
Name - HelloWorld2.class
package - examples.servlets
Location - d:\weblogic\BDL\servletclasses ---- here BDL is my new folder
where I want to keep my servlets
My CLASSPATH(environment) settings:
D:\weblogic\BDL\servletclasses;d:\weblogic\classes\boot;d:\weblogic\eval\clo
>
udscape\lib\cloudscape.jar;d:\weblogic\lib\poolorb.jar;D:\java\jre\lib\rt.ja
r;
my weblogic classpath settings(set it thru wlconfig)
D:\weblogic\BDL\servletclasses;d:\weblogic\classes\boot;d:\weblogic\eval\clo
>
udscape\lib\cloudscape.jar;d:\weblogic\lib\poolorb.jar;D:\java\jre\lib\rt.ja
r;
My weblogic.policy:
grant codeBase "file:d:/weblogic/-" {
permission java.io.FilePermission "d:${/}weblogic${/}-",
"read,write,delete,execute";
permission java.net.SocketPermission "localhost:1-9000",
"connect,accept,listen,resolve";
permission java.awt.AWTPermission "accessClipboard";
permission java.awt.AWTPermission "accessEventQueue";
permission java.awt.AWTPermission "showWindowWithoutWarningBanner";
permission java.io.SerializablePermission"enableSubclassImplementation";
permission java.io.SerializablePermission "enableSubstitution";
permission java.lang.RuntimePermission "accessClassInPackage.*";
permission java.lang.RuntimePermission "accessDeclaredMembers.*";
permission java.lang.RuntimePermission "createClassLoader";
permission java.lang.RuntimePermission "createSecurityManager";
permission java.lang.RuntimePermission "defineClassInPackage.*";
permission java.lang.RuntimePermission "exitVM";
permission java.lang.RuntimePermission "getClassLoader";
permission java.lang.RuntimePermission "createClassLoader";
permission java.lang.RuntimePermission "getProtectionDomain";
permission java.lang.RuntimePermission "loadLibrary.*";
permission java.lang.RuntimePermission "modifyThread";
permission java.lang.RuntimePermission "modifyThreadGroup";
permission java.lang.RuntimePermission "readFileDescriptor";
permission java.lang.RuntimePermission "setContextClassLoader";
permission java.lang.RuntimePermission "setFactory";
permission java.lang.RuntimePermission "setIO";
permission java.lang.RuntimePermission "setProtectionDomain";
permission java.lang.RuntimePermission "setSecurityManager";
permission java.lang.RuntimePermission "writeFileDescriptor";
permission java.lang.reflect.ReflectPermission "suppressAccessChecks";
permission java.net.NetPermission "requestPasswordAuthentication";
permission java.net.NetPermission "setDefaultAuthenticator";
permission java.security.SecurityPermission "getPolicy";
permission java.security.SecurityPermission "setPolicy";
permission java.util.PropertyPermission "*", "read,write";
grant codeBase "file:d:/weblogic/BDL/servletclasses/-" {
permission java.io.FilePermission
"d:${/}weblogic${/}BDL{/}servletclasses{/}-", "read,write,delete,execute";
permission java.net.SocketPermission "localhost:1-9000",
"connect,accept,listen,resolve";
permission java.awt.AWTPermission "accessClipboard";
permission java.awt.AWTPermission "accessEventQueue";
permission java.awt.AWTPermission "showWindowWithoutWarningBanner";
permission java.io.SerializablePermission"enableSubclassImplementation";
permission java.io.SerializablePermission "enableSubstitution";
permission java.lang.RuntimePermission "accessClassInPackage.*";
permission java.lang.RuntimePermission "accessDeclaredMembers.*";
permission java.lang.RuntimePermission "createClassLoader";
permission java.lang.RuntimePermission "createSecurityManager";
permission java.lang.RuntimePermission "defineClassInPackage.*";
permission java.lang.RuntimePermission "exitVM";
permission java.lang.RuntimePermission "getClassLoader";
permission java.lang.RuntimePermission "createClassLoader";
permission java.lang.RuntimePermission "getProtectionDomain";
permission java.lang.RuntimePermission "loadLibrary.*";
permission java.lang.RuntimePermission "modifyThread";
permission java.lang.RuntimePermission "modifyThreadGroup";
permission java.lang.RuntimePermission "readFileDescriptor";
permission java.lang.RuntimePermission "setContextClassLoader";
permission java.lang.RuntimePermission "setFactory";
permission java.lang.RuntimePermission "setIO";
permission java.lang.RuntimePermission "setProtectionDomain";
permission java.lang.RuntimePermission "setSecurityManager";
permission java.lang.RuntimePermission "writeFileDescriptor";
permission java.lang.reflect.ReflectPermission "suppressAccessChecks";
permission java.net.NetPermission "requestPasswordAuthentication";
permission java.net.NetPermission "setDefaultAuthenticator";
permission java.security.SecurityPermission "getPolicy";
permission java.security.SecurityPermission "setPolicy";
permission java.util.PropertyPermission "*", "read,write";
I dont know what is wrong here. In the weblogic.policy file,I tried
differrent combinations but it never worked.
I find weblogic documentation for troubleshooting to be pathetic.Notuseful
at all.Documentation looks
good to read ;not for practical purposes.I'm not sure whether others have
similar opinion.
I'm stuck at this thing for the past few days,I still have lot of work todo
to purusue our management team to buy weblogic
but I'm still stuck at this thing.
Thank you very much for your time.
Thanks,
Sravan
"Sravan Thella" <[email protected]> wrote in message
news:[email protected]...
Hi,
I'm new to weblogic server.I'm trying to setup weblogic 510.Everything
was
going fine until I got stuck to this small thing.I'm not able to load a
simple servlet!.
I would appreciate any pointers regarding this.Please Help me!!!
Here is what I tried:
I have installed weblogic510 plug-in for IIS.I could successfully runjsp
files.However I am not able to load simple servlets;It gave an exception
"java.lang.IllegalAccessError: try to access class
weblogic/utils/classloaders/FileSource from class
weblogic/servlet/internal/WarClassFinder"
Details of my configuration:
WebServer - IIS 4.0
IIS port=80
Weblogic port=7001
I had set it in such a way that all the requests first go to IIS andthen
IIS redirects them to Weblogic.I've followed the steps according to the
document "Installing the Weblogic ISAPI Plug-in".
I've registered the servlet in weblogic.properties as following:
weblogic.httpd.register.hello=examples.servlets.HelloWorld2
I tested the servlet by URL http://localhost:7001/hello
Following is the eact text for the exception I got in the WeblogicServer
window:
Mon Jul 24 12:13:13 PDT 2000:<E> <ServletContext-General> Error loading
servlet:
examples.servlets.HelloWorld2
java.lang.IllegalAccessError: try to access class
weblogic/utils/classloaders/Fi
leSource from class weblogic/servlet/internal/WarClassFinder
at
weblogic.servlet.internal.WarClassFinder.getSource(WarClassFinder.jav
a, Compiled Code)
at
weblogic.servlet.internal.WarClassFinder.getClassSource(WarClassFinde
r.java:110)
at
weblogic.utils.classloaders.GenericClassLoader.findLocalClass(Generic
ClassLoader.java:381)
at
weblogic.utils.classloaders.GenericClassLoader.reallyLoadClass(Generi
cClassLoader.java, Compiled Code)
at
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader$Slave.
loadClass(RecursiveReloadOnModifyClassLoader.java:234)
at
weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClass
Loader.java:146)
at
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader.findLo
calClass(RecursiveReloadOnModifyClassLoader.java:109)
at
weblogic.utils.classloaders.GenericClassLoader.reallyLoadClass(Generi
cClassLoader.java, Compiled Code)
at
weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClass
Loader.java:172)
at
weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClass
Loader.java:146)
at
weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubI
mpl.java:291)
at
weblogic.servlet.internal.ServletStubImpl.getServlet(ServletStubImpl.
java:164)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:99)
at
weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletCon
textImpl.java:742)
at
weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletCon
textImpl.java:686)
at
weblogic.servlet.internal.ServletContextManager.invokeServlet(Servlet
ContextManager.java:247)
at
weblogic.socket.MuxableSocketHTTP.invokeServlet(MuxableSocketHTTP.jav
a:361)
at
weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java:261)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java,Compiled
Code)
Mon Jul 24 12:13:13 PDT 2000:<E> <ServletContext-General> Servlet failed
with Ex
ception
I dont think there were any problems in the classpath or
servletpath;Basically WeblogicServer was able to locate the servlet butwhen
it tried to load the servlet it gave this exception.
I would appreciate any ideas/suggestions.
Thanks,
Sravan -
BI accelerator: problem displaying Data Load Status
I have installed BI accelarator following the note : 934848.
The problem is when I try to monitor Data Load Status , I've this error on the portal : "Error reading the data of InfoProvider 0TCT_VC12, There is still no data source assigned to VirtualProvider 0TCT_VC12" but I've activated direct access for this virtual info prorvide to the correct source system as it is mentionned(step 5) and it is assigned to a data source (0TCT_DS12).
any help would be grateful,rewarded
thomas
Message was edited by:
Thomas BailleulYou're absolutely right Rajani , it's about BI Cokpit Administration.
In fact, I really activate direct access, I added the right source system in the Source System for InfoSource 3x window.
but it 's still not working. Thanks for your Hekp. -
TS3991 Please help -- my iCal data has disappeared from iCloud website!
Hi -- I just opened iCal via the iCloud website on my MacBook Air. My calendar data appeared for a flash, then disappeared -- now almost ALL of my calendar data is completely gone from the iCloud website. I checked the calendar app on my iPhone 4 and the data is still there, so I turned on Airplane Mode on my phone hoping the blank calendar wouldn't sync to my phone that way. My contacts seem to still be there.
Please help -- where did the data go, and how can I get it back onto the iCloud website? Thanks in advance!Thank you. You may have been right about the server glitch. After hours, literally, on the phone with Support trying to load the calendar from my phone, and finally giving up, my calendar on the website was magically restored 24 hours later.
I'm guessing I'm not the only one this happened to, and that they restored to an earlier version for me and whomever else's data was lost. Pretty scary, actually -- and annoying!
Thanks again for your help. -
Please help, problems running recovery
hi, i have a satellite P755-S5262 RUNNING WINDOWS 7 64BIT WITH AN i7 PROCESSOR
when i first got my laptop i was having some minor problems with it so i did a restore from the harddrive and that fixed things up. i made some recovery media and the went about setting it up, the made a backup with nere back it up 11. later on more problems and i tried to restore from nero back up and backup didn't work so i tried recovery and it won't recover from the hard drive but my recoverey media worked and everything was fine. so one late sleepy night
i triede to install some free software which didn't work so i uninstalled it using REvo uninstall and made a bad mistake, windows would not boot. most of the repair options, including toshiba recovery were not coming up.
i had my media but after inserting disc one it said files were loading and the nothing happened. anyway i finally got
recoverey to come up but after choosing out of box recovery with partitions the same i got thew message preparing partitiuons and the error 08-0E89-0000 PARTITION preperation failed
please help!If the problem is with the recovery media, ordering replacement recovery media might be able to help.
If that doesn't work, it could be a failing hard drive.
- Peter -
Please help! Old dates on new photos?
I recently backed up my iphotos to disk(CD) as a precaution prior to upgrading to Snow Leopard. It appeared everything went smoothly however I'm noticing when I go into my "2010" Library, where all my photos were previously automatically organized by month/date, that the last 5 months now show "2004" as I scroll through. Even when "Get Info" on a photo that I took in December of 2010, it shows June 04, 2004.
My iphoto Library doesn't even start until 2006, which is when I got this iMac. And I now have an "Early Photos" in my Library that I don't believe was there before.
I can now only view photos from November and December 2010 when I go to the "Last 2 Rolls" or when I view the entire Library that has all the years. But even when I view all years, they are completely disorganized...2008 photos are mixed in with 2006 photos, etc. I'm considering upgrading to iPhoto 11 through the iTunes App store but I want to get my current photos back to the organized fashion they were in prior to my back-up to disk, which seems to be when the problem occured. Please help. Thanks!Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD -
URGENT : Please help: Purchasing and Inventory loads
I am currently in BWQ. I did the inital deletion of set up tables by LBWG and then ran the set up jobs through SBIW for Purchasing and Inventory.
I also did the industry setting and processkey .
I ran the init load yesterday and it gave some records and then deltas brought 0 records . For some reason I felt that there should not be 0 records and I went and deleted the set up table again and ran the set up jobs. I can see records in the set up table and RSA3.
But when I am running the load today it brings 0 records. I thought may be the delta ran this morning so it brought 0 records. therefore I ran the full repair reuqest but still there only 0 records.
Can someone explain this and advice what needs to be done.
ThanksHi BI TCS
Initially when you loaded init data you got some records and delta brought 0 records. This is logical if there are no new records creates in R/3 system or you have not executed delta collector job - Job control through LBWE for a particular application.
Now carry out following steps for purchasing data loads -
1.delete the setup tables using tcode LBWG
2.perform set up for the purchasing in background mode
3.check the job log for step 2 in SM27
4. find out no of documents written to setup tables for purchasing using tcode NPRT
5.Now load the init load to BW- this will load the data that you have covered under setup tables
6. Now create/change some data in R/3. This data must be withing your init range used in init infopackage. If you have done init load with no selection parameters then no problem.
7. Run job control for purachasing in LBWE
8. Now load the delta load -> it should load the correct delta data into BW.
Hope this resolves
Regards
Pradip -
Hi gurus,
I am just practicing in SAP BW. I have created Info Catalog, InfoObjects, InfoAreas, InfoProviders. All I did and went throught correct. But when I check data in Infocube. When I want to see the InfoCube Contents, it is taking all infoobjects but it is not show ing data values. Please help me how to see data while seeing with infocube->manage->data browser: Table /bic/fic_demoBC: selecttion screen.
your help will be appriciate
Thanks
Happyhi ,
Considering that u r loadinf from the Flat file .. follow the steps ...
1.create Source System : RSA13 --- Create Source System.
2.Create InfoArea : RSA11 /// RSA 14
Create info object catalogues and the Info Objects .. Key figs n chars .
3.Create Infosource if transaction data using flexible update n if master data using direct update.
4.Do mapping n propoose transfer rules. n see the communication structure.
n activate transfer rules.
5.create Info cube n according the starschema concept . i.e. Tcode RSA11 give the IC name n desc .. give the infosource n create dimensions n assign the chars logically n give time chars .
6.Now context menu on the IC n create update rules to update the data from the Infosource to the data target.
7. Now schedule the data from Source to the DT using the Info package .
8.in the scheduler screen u can give the selection n the data target n the processing n finally star tloading .
now u can check the data in the monitor screen by selcting the dispaly contents n selecting the chars n Kfs to be dispalyed .
let us know if any help requuired .....
regards .. Kumar Sarvepalli ..........,,, -
Please help me capturing data from HTML table
Hello Everyone,
Our Storage subsystem generates a html table containing all LUN allocation for printing. I am saving this html file on disk to collect all table infomation and to put it into a database.
I am having problems extracting table information from the html file. I tried using regular expressions but still not going anywhere. Below is a sample few lines from the html file.
Please your help is appreciated solving this problem how to collect this information from a HTML file or if Java has any class for this type of purpose.
Please advice
arsi
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<!-- saved from url=(0068)https://10.210.44.14/cgi/rsConfigPrintDisplay?200702121685061633,FS,2 -->
<HTML><HEAD><TITLE>Volume Assignments</TITLE>
<META http-equiv=Content-Type content="text/html; charset=windows-1252">
<META content="MSHTML 6.00.2900.3020" name=GENERATOR></HEAD>
<BODY><FONT face="Times New Roman,Times" size=2>
<TABLE cellSpacing=1 cellPadding=3 border=2>
<CAPTION>
<H2>Volume Assignments</H2></CAPTION>
<TBODY>
<TR vAlign=top>
<TH><FONT face="Times New Roman,Times" size=2>Volume</FONT></TH>
<TH><FONT face="Times New Roman,Times" size=2>Location</FONT></TH>
<TH><FONT face="Times New Roman,Times" size=2>LSS</FONT></TH>
<TH><FONT face="Times New Roman,Times" size=2>Volume Type</FONT></TH>
<TH><FONT face="Times New Roman,Times" size=2>Size</FONT></TH>
<TH><FONT face="Times New Roman,Times" size=2>Storage Type</FONT></TH>
<TH><FONT face="Times New Roman,Times" size=2>Host Port</FONT></TH>
<TH><FONT face="Times New Roman,Times" size=2>Host Nicknames</FONT></TH></TR>
<TR vAlign=top>
<TD><FONT face="Times New Roman,Times" size=2>02A-25015</FONT></TD>
<TD><FONT face="Times New Roman,Times" size=2>Device Adapter Pair 1</FONT>
<BR><FONT face="Times New Roman,Times" size=2>Cluster 1, Loop A</FONT>
<BR><FONT face="Times New Roman,Times" size=2>Array 2, Vol 042</FONT></TD>
<TD><FONT face="Times New Roman,Times" size=2>0x10</FONT></TD>
<TD><FONT face="Times New Roman,Times" size=2>Open System</FONT></TD>
<TD><FONT face="Times New Roman,Times" size=2>000.9 GB</FONT></TD>
<TD><FONT face="Times New Roman,Times" size=2>RAID-5 Array</FONT></TD>
<TD><FONT face="Times New Roman,Times" size=2>Fibre Channel</FONT>
<BR><FONT face="Times New Roman,Times" size=2>ID 00, LUN 502A</FONT></TD>
<TD><FONT face="Times New Roman,Times" size=2>R1L01_0,</FONT> <BR><FONT
face="Times New Roman,Times" size=2>R1L01_1,</FONT> <BR><FONT
face="Times New Roman,Times" size=2>R2L08_1,</FONT> <BR><FONT
face="Times New Roman,Times" size=2>R2L08_0,</FONT> <BR><FONT
face="Times New Roman,Times" size=2>S3L06_0, S3L06_</FONT> <BR><FONT
face="Times New Roman,Times" size=2>1, S4L06_0,</FONT> <BR><FONT
face="Times New Roman,Times" size=2>S4L06_1</FONT></TD></TR>
<TR vAlign=top>i wrote the programme for 2 stepper motor as attachment file below. they are run. but when the "start" button is ON then the "emergency stop" is not effects.
for "emergency stop" functions, i used 4 limit contactors. if one of them is "on" then the programme will be stop.
but in fact, when the system is running, i can not stop if one of the limit contacor is on.
cuold you please help me to do with this problem.
thanks
Attachments:
EMERGENCY STOP.vi 435 KB
toolpaths-ut.vi 64 KB
parallel program motor 1,2.vi 96 KB
Maybe you are looking for
-
I lose track of the battery tech being used now (is it lithium-ion?). Is it beneficial, or bad, to let the battery in an iPhone 4S run down to near 0% once in a while? What does Apple recommend? Thanks! Chris www.pretenseofknowledge.com
-
Ssl_error_rx_unknown_record_type
I keep getting this pop up box saying: An error occurred during a connection to support.mozilla.org. SSL received a record with an unknown content type. (Error code: ssl_error_rx_unknown_record_type)
-
Enquiry about Mac Pro Software
My wife and I are trying to decide whether to purchase an IMac or a Mac Pro. We like the sleekness of the IMac and the fact that everything is in one unit. Having said that, acquiring a machine that can grow with our needs is high on our list of prio
-
Trying to connect the CRM 7.0 and ECC 6.0 (RFC ?)
Hello Gurus, I am trying to connect the CRM 7.0 server to ECC 6.0 server. Can anybody please give me a step by step procedure for this please. Thanks in advance. Phani KV
-
Hi, I have created one Account dimension in dimension library with 5000 members. I have Five Planning Applications and each application should have 1000 Account members. Can I share particular 1000 account members from dimension library account dimen