Please help: Problem sending fax to one recipient using Apple USB Modem

Hello,
I'm using an Apple USB Modem to send an receive faxes on my PowerMac G5. This is working great to the most recipients, but not one with a Philips fax machine.
The problem is, that everybody can send faxes to him - except of me
I'm using a software called Pagesender for this, I e-mailed the support and he told me, that the my fax is timing out and some of his customers have made positive reports of Zoom and Best Data Modems in cases where the Apple Modems have encountered line noise.
Also the Tiger fax solution doesn't work ... The odd things are, that I could send faxes using a stationary fax machine and don't have problems to send faxes to others ...
Is there really no solution for this.
Best regards
René

Similar Messages

Entire Fax wont come thru? Apple usb modem

Could anyone tell me why no more then 3 to 4 pages of a fax will come thru? Any more thent hat and they just dont show up. I have tried savig to differnet folder, emailing to different addresses and printing but nothing. Is there a possible cache issue? It seem like something fills up and wont accept anymore data?
This is on an Intel iMac with 10.4.9

Sorry, I can't help... FAXing in OSX has been so terrible that I still use my Ataris for all FAXing, or OS9, which isn't as easy as on my Ataris, but way better than OSX.
Not sure it would help, but I'd be tempted to get/try Applejack...
http://www.versiontracker.com/dyn/moreinfo/macosx/19596
After installing, reboot holding down CMD+s, then when the prompt shows, type in...
applejack AUTO
Then let it do all 5 of it's things.

Faxes won't send through Apple USB modem

I'm trying to use PageSender to send faxes via my Apple USB external modem. Every time I try to send a fax, I get an error message that says my modem is in use. The tech people say that my external modem is supposed to show up in the Printer Setup Utility and in the Print and Fax preferences, but it doesn't appear either place. They're puzzled. Before I installed PageSender, I was trying to send a fax using the OS X built-in fax capability, but I kept getting a message about a software error and the faxes would be put on a 5-minute hold for sending later, when the same thing would occur again. Anybody got an idea about what's happening? Are there updated drivers or anything else to update?

I too am trying to use pagesender. I can fax from the server, but not from client imacs. Using apple usb modem as well. The faxes won't go over to pagesender- just hangs in the printer que on the client computer. All computers can see one another on the wired network and a DIR-130 router. We share a network printer with no problems.
Pagesender support has been helpful, but they don't offer live support. If anyone knows an apple consultant who can walk me through the process on the phone I would be interested.
Thanks

Apple USB Modem - Slow fax speed

Any ideas on why small documents take a very long time to send via fax using Apple USB Modem. I've tried sending a 35 kb pdf document using the built in fax (Print, PDF, Fax PDF) and using Pagesender fax software. Each method takes 2:30 to 3 minutes to send one single page.
I also have a Brother Printer/Fax machine (MFC-5840) and can send the document to the printer's fax and have the document faxed in 20 to 30 seconds.
Any ideas on why it takes so long using the Apple USB Modem?
(Printing to the Brother printer/fax is fine for single documents but I would like to be able to take advantage of sending multiple documents that pagesender/USB Modem would allow)

Vic,
I'm not sure if this is part of your problem, but there have been some less than laudatory user experiences with the Apple USB modem. Apparently, USB modem connections are less than optimal for Macs, whether the connection is high speed internet or dial-up (for fax). You can do a search around here for particular problems with the USB modems.
By the way, do you use the USB modem and dial-up for your other web activities or do you otherwise use broadband?
Regards,
Steve M.
Here's one thread:
http://discussions.apple.com/thread.jspa?messageID=1811003&#1811003
Message was edited by: Steve M.

Cannot send faxes w/ Apple USB modem, can you offer some help please?

Hi,
I am using the Apple USB modem connected to my brand new MacBook and so far could not send any faxes. The modem is working because I was able to receive 1 fax (which I sent to myself from my Nokia 9300i).
The monitor tells me that: dialing... ok, connecting...ok, sending... and then it fails.
On the other side (my Nokia 9300i) the fax is starting to come in but shortly thereafter it stops.
I tried Apple Fax (embbedded in the OS) and also PageSender v.4 with the same results.
Anyone of you can offer any suggestion/help as to why this is happening?
Thanks

I have always believed that the answer to this is yes, however, I have never had occasion to test it. In the past when we all used dialup it was either/or, because you couldn't fax with the same modem you were using to connect to an ISP at the same time. But since you are configuring internet through one network and faxing through another, it should work. Maybe someone actually doing it will wade in here.
Of course, there are a lot of efax services out there now that let you send and receive faxes through the internet.

Problem on sending fax with Apple USB modem

Hello everyone,
I use my macmini to manage faxes to help my father's business, as fax is one of the most important mean of communication to our clients. While I can only receive fax from outside to my mac, but I cannot send fax from my mac through "Send PDF" option, it just stop working, and "Waiting for modem to become available" without using my telephone-line. It is weird when I plug it into my macbook that it works.
Look forward to your advice. Thank you,
Victor Tang
Message was edited by: victan7300

I am having problems sending and receiving faxes, too, and have been working with AppleCare level 2. They are off for a couple of days, and the solution is nowhere in sight. They did capture information from my system as I tried to fax, and sent it to engineering. They have determined that I am not getting a dial tone.
When I connect my phone to the jack, I do get a dial tone and can talk on the phone (which I do frequently). I have been provided with two additional new Apple USB modems to try to see if that would fix the problem. It did not make any difference which of the three modems I use, I cannot send or receive faxes. Yesterday, I booted up my old iMac (OS X 10.4.11 with a collapsing hard drive, but an internal modem). I attached this computer to the same phone jack and was able to freely send faxes - every single try.
I downloaded and set up the application PageSender just to see if it was the fax software (I have been trying to just use what came with my MacBook Pro). Using the Apple USB external modem (as I have had to do with this computer and operating system), I could not send any faxes - could not get a dial tone, according to PageSender.
I, therefore, believe that the problem is with the external modem and/or the extensions that operate the external modem.
I did try what you have suggested above - the substitution of the IOSerialFamily.kext:
I partitioned my harddrive into two partitions HD and HD_2. I loaded OS X 10.5.5 (from my CD) onto the second partition. I then copied the IOSerialFamily.kext on my thumb drive (from OS X 10.5.5 the version was 92). Then I upgraded to 10.5.6, and copied the ioSerialFamily.kext on my thumb drive - this time with 10.5.6 the version was 93. I went back to my first partition where I have 10.5.7 (version 94) and tried to transfer version 93 IOSerialFamily.kext to the extensions. As soon as I tried to mount the Apple USB modem I received the following message:
"System extension cannot be used
The system extension”/system/Library/Estensions/IOSerialFamily.kext/contents/PlugIns/Motor olaSM56KUSB.kext was installed improperly and cannot be used. Please try reinstalling it or contact the product’s vendor for an update."
At that point I tried to exchange the version 93 with the one that I removed - version 94, but I continued to get the same message. I decided to reinstall 10.5.7 again hoping that this would solve the message problem. No such luck! I did now have version 94, but the same error message. At this point, I tried a permissions repair. This solved the error problem... but I was still not able to send or receive faxes, because the fax programs could detect not dial tone.
Because I have never sent or received faxes with this computer - only my iBook (10.4.11), I decided to go back to the second partition on my computer and see if I could send a fax from the macBook Pro with 10.5.6. The results are sporadic. I had to try several times, and occasionally I would get a dial tone and could send the fax, but more often, I could not. There was no difference in any of the 2 modems I tried (by now I had returned 1 to the Apple Store), or whether I used the front USB port or the rear USB port. The sending of a fax with MacBook Pro and 10.5.6 was not consistent or reliable and I could only occasionally get a dial tone... with 10.5.7 I can never get a dial tone.
According to my AppleCare representative the engineers are "on this". But I see that the original post was in November, which was prior to 10.5.7; I purchased my MacBook Pro with 10.5.5 in December, so imagine that this problem has been around through several upgrades of 10.5.
This is unbelievably frustrating! Has anyone been able to easily send and receive faxes with 10.5.5?
Chris (hopefully you are still around), did you get any error messages when you exchanged your 10.5.6 IOSerialFamily.kext for the 10.5.7 IOSerialFamily.kext - especially when you mounted- or tried to attach the external modem? If so, how did you handle that?
Sorry that this has been such a long post. I have tried to provide as much information as I could in the hopes of finding a solution. Any ideas???
THANKS!

Problem sending mail to one domain

System: Netware 6.5.8 with all current patches.
We are having a problem sending mail to one particular domain (neigerllp.com). When a message is sent our GW GWIA returns a "553 sorry, that domain isn't in my list of allowed rcpthosts (#5.7.1)" error message. We receive that error because our mail server is looking at their secondary mx instead of their primary mx. If I unload named then our mail server looks for the secondary external DNS server and mail is sent without error to this domain. When named is not loaded it sends to the correct mx server listed. If I reload named it will work for a while but then default to the incorrect mail server. It also works for a while when I load named -pa, but eventually reverts back to the incorrect server. Could someone help me resolve this issue?
Thanks,
bp

On 23.03.2011 20:06, BPainter wrote:
>
> System: Netware 6.5.8 with all current patches.
>
> We are having a problem sending mail to one particular domain
> (neigerllp.com). When a message is sent our GW GWIA returns a "553
> sorry, that domain isn't in my list of allowed rcpthosts (#5.7.1)" error
> message. We receive that error because our mail server is looking at
> their secondary mx instead of their primary mx. If I unload named then
> our mail server looks for the secondary external DNS server and mail is
> sent without error to this domain. When named is not loaded it sends to
> the correct mx server listed. If I reload named it will work for a
> while but then default to the incorrect mail server. It also works for
> a while when I load named -pa, but eventually reverts back to the
> incorrect server. Could someone help me resolve this issue?
Not here. It's a known GWIA bug. It doesn't look at the preference in
the MX record, but merely uses them i nthe order they come in. Your DNS
making a difference is a red herring.
Check if your GWIA is up to date. If it is, you will have to open a SR
with Novell.
CU,
Massimo Rosen
Novell Product Support Forum Sysop
No emails please!
http://www.cfc-it.de

I've a problem which is: Ibelieve there's someone who knows my password in some games like "Happy Day" so, could you please help me by not letting anybody to use this game except for this IMEI 01 336000 521261 1 even if they have the correct password.

I've a problem which is: Ibelieve there's someone who knows my password in some games like "Happy Day" so, could you please help me by not letting anybody to use this game except for this IMEI 01 336000 521261 1 even if they have the correct password. Thanks alot for your help.

Change your password.
These are user forums. We can't do what you ask, in fact no one can.

When iPhone is connected to PC, it shows in itunes but Autoplay does not open for me to copy photos. I tried the Control Panel, changing Autoplay settings but no use. I use a Windows Vista. Please help! All my little ones' pictures are on my iPhone 3GS

When iPhone is connected to PC, it shows in itunes but Autoplay does not open for me to copy photos. I tried the Control Panel, changing Autoplay settings but no use. I use a Windows Vista. Please help! All my little ones' pictures are on my iPhone 3GS.
I tried hard reset on my iPhone. I tried restarting laptop and iPhone. I tried a different laptop. I tried removing driver and reinstalling from Device Manager but did not find a driver other than "Apple Mobile Device USB Driver" under "Universal Serial Bus controllers" which I heard shouldn't be uninstalled.
Anything I haven't tried?
HELP!

A bit confused by your statement
bcboarder wrote:
. I do not understand why the music is clearly on the Ipod but wont reconize it anywhere.
Are you seeing your music listed in the iPod screen, or in Win explorer as in your earlier post?
I can see all the songs in my Edrive>al's Ipod> Ipod Control> Music folder.
A corrupted iPod database, will report zero music used, and have your music size reported as others, so you wont see the music in the iPod screen. Sorry, I thought there was some hope for you with iPodAccess, in recovery of the corrupted iPod database with your ratings.
You can try to borrow and use the Mac Disk Utility ->First Aid ->Repair.
Of course, if your iPod Hardisk is in a bad state, from the Disk Diagnostic report, then all my suggestion are futile.

Premiere Pro CS5: please help problem with importing a file error output "there was an error decompressing audio or video"

please help problem with importing a file error output "there was an error decompressing audio or video"

this is related to what adobe program/version?

Hi, After I installed Mac Lion, I have problem with the tamil font while typing in Neo Office. Especially with the letters "e-Ex: தெ" and "ai-Ex:தை". Please help me I know its not bug from Apple It shd be some problem in neo.

Hi, After I installed Mac Lion, I have problem with the tamil font while typing in Neo Office. Especially with the letters "e-Ex: தெ" and "ai-Ex:தை". Please help me I know its not bug from Apple It shd be some problem in neo.

Is your problem due to the keyboard or to NeoOffice Characters? You have to change probably the font. Not all fonts are supporting all Unicode sets. Which font you have in your NeoOffice set to write Tamil? Try with Arial Unicode MS for example.
Are the letter e-Ex and ai-Ex right in your posting? If they are right, how you inserted these letters in your posting? By copy and paste or by typing? If by typing, your question is related to NeoOffice. Probably you should reinstall or update NeoOffice? Or switch to OpenOffice?
marek

HT5312 algokar Dec 26, 2013 2:11 AM Forgot Answer Questions safety tried to re-send a lot of email did not reach any messages to re-ask safety I can not buy any program that I forgot to ask him answer safety Please help and send me a re-liquefaction a

Forgot Answer Questions safety tried to re-send a lot of email did not reach any messages to re-ask safety
I can not buy any program that I forgot to ask him answer safety
Please help and send me a re-liquefaction answer to the same email

1) Apple ID: All about Apple ID security questions
If necessary
2) See Here... ask to speak with the Account Security Team...
Apple ID: Contacting Apple for help with Apple ID account security
3) Or Email Here > Apple Support iTunes Store Contact

I upgraded my computer and need a link to download Acrobat Pro 9 MAC. I have my serial number but do not have my disc. Please help and send link. Thank you.

I upgraded my computer and need a link to download Acrobat Pro 9 MAC. I have my serial number but do not have my disc. Please help and send link. Thank you. My MacPro computer is slowly dying and I need to get going with Acrobat Pro 9.

Unfortunately, Adobe has quit support of earlier version. They have a version of AA9 Pro for Windows posted, but not for the MAC as I understand it. You can try Adobe Acrobat X (10) Pro, Reader, and Suite Direct Download Links | ProDesignTools, but again I can only find PC versions. Someone may drop by with a link or you might see if anyone locally has the CD (that you could get the install file from). You will still need to use your original S/N.

Please help. When exporting a 720p video using Quicktime Conversion in FCP it saves some extra temporary files to my computer. The file is called ICMMultiPassStorage. This file gets so large that eventually the program and exporting process crashes.

Please help. When exporting a 720p video using Quicktime Conversion in FCP it saves some extra temporary files to my computer. The temporary file it saves is called ICMMultiPassStorage. This file gets so large that eventually the program and exporting process crashes. I have been able to locate the file using GrandPerspective and close out of FCP to delete it. But when I try exporting the movie again it creates the ICMMultiPassStorage file again. I have made sure my scratch disks are set to my external hard drive so I know that isn't the issue. How do I fix this problem so these temporary files are not being stored on my internal hard drive instead of my external?Thanks!

Try exporting the timeline "using current settings" via Make QuickTime Movie, then submit that clip to Compressor for the transcode. This should be faster and less painful.

I am new to mac please help me basic tips an trick to use mac

i am new to mac please help me basic tips an trick to use mac its very frustrating for any thing i have to call apple help line
any acesserious to macbook air 13 like any silicon case or carry case or some acesserious
i have delete contains of master folder of phothos still i can see phothos in my mac so how can i delete it

Apple has a site for new users. Use it. Also, David Pogue is an excellent tech writer who has penned a series called the Missing Manual. I assume you've come to the Mac from the Windows world and he's written one especially for switchers. I've linked to the version for Mavericks (10.9) but if you have an earlier version of the Mac OS he's written a similar book for them as well.

Please help: Problem sending fax to one recipient using Apple USB Modem

Similar Messages

Maybe you are looking for