Please help,problem when creating Jar.
I am somewhat new to Java...But I made a simple program,and then tried to create a Jar file.
Now all my Java commands where in /program files/Java/JavaSDK/Bin,it was a hassle to CD to that everytime I wanted to use a command,so I coppied all the commands in BIn directory,and put them in System 32,I suppose this is ok? That was my first question.
My next one is,when i try creating a Jar file..I suppose I am doing ti right,but the entire command prompt fills up with code,the ASCII and all the symbols....and a REALLY loud constant beep comes from my computer,and speakers..and it seems it doesnt create anything by this code in the screen and th noise..
Please help.
My next one is,when i try creating a Jar file..I
suppose I am doing ti right,but the entire command
prompt fills up with code,the ASCII and all the
symbols....and a REALLY loud constant beep comes from
my computer,and speakers..and it seems it doesnt
create anything by this code in the screen and th
noise..It is from jar help:
Example 1: to archive two class files into an archive called classes.jar:
jar cvf classes.jar Foo.class Bar.class
Example 2: use an existing manifest file 'mymanifest' and archive all the
files in the foo/ directory into 'classes.jar':
jar cvfm classes.jar mymanifest -C foo/ .
Similar Messages
-
please help me < when update my i phone 3G < i finish update but face problem , appear me msg There is no SIM card installed in the iPhone You ar attempting to activate. Please disconnect
Sounds like your phone was hacked to use with your carrier. Updating it has relocked the phone to it's original carrier. You will not get the phone working again without a SIM from the original carrier.
-
Problem when creating Database (Database, OS and hardware Configuraiton included)
Problem when creating Database:
Below are the problems, which I faced during creation of database. I have mentioned both the problem separately. Plus the log file maintained by Oracle during installation. It might help in diagnosing the error. Plus a little conclusion with I turned up to.
There are two problems, when creating database with Oracle Database Assistant. One when creating pre tuned database from CD. And second when creating customized database giving options your self.
Problem # 1:
When creating pre tuned database from CD. The process of creating Database is 90 % complete and is at step # 3 Initializing Database. It gives error ORA-03113: end-of-file on communication channel.
I searched following oracle help for this problem.
ORA-03113: end-of-file on communication channel
Cause: An unexpected end-of-file was processed on the communication channel. The problem could not be handled by the Net8, two-task software. This message could occur if the shadow two-task process associated with a Net8 connect has terminated abnormally, or if there is a physical failure of the interprocess communication vehicle, that is, the network or server machine went down.
Action: If this message occurs during a connection attempt, check the setup files for the appropriate Net8 driver and confirm Net8 software is correctly installed on the server. If the message occurs after a connection is well established, and the error is not due to a physical failure, check if a trace file was generated on the server at failure time. Existence of a trace file may suggest an Oracle internal error that requires the assistance of customer support.
Conclusion:
What I conceive from this problem and the help available is that, I have to install NET8 again. But I am not sure about the solution, please tell me whether I am rite or not.
Problem # 2:
When creating database with custom option. The process of creating Database is 2 % complete and is at step # 2 Creating Database Files. It gives error ORA-12571: TNS:packet writer failure.
I searched following oracle help for this problem.
ORA-12571: TNS:packet writer failure
Cause: An error occurred during a data send.
Action: Not normally visible to the user. For further details, turn on tracing and re-execute the operation. If error persists, contact Worldwide Customer Support.
Conclusion:
What I conceive from this problem and the help available is that, I have to install NET8 again. But I am not sure about the solution, please tell me whether I am rite or not.
Log File Showing Error :
Result code for launching of configuration tool is 0
Launched configuration tool Oracle Database Configuration Assistant
Command which is being spawned is C:\Program Files\Oracle\jre\1.1.7\bin/jrew.exe -Duser.dir=d:\oracle\ora81\assistants\dbca\jlib -classpath ";C:\Program Files\Oracle\jre\1.1.7\lib\rt.jar;C:\Program Files\Oracle\jre\1.1.7\lib\i18n.jar;d:\oracle\ora81\jlib\ewt-3_3_6.jar;d:\oracle\ora81\jlib\share-1_0_8.jar;d:\oracle\ora81\jlib\swingall-1_1_1.jar;d:\oracle\ora81\assistants\dbca\jlib\dbassist.jar;d:\oracle\ora81\assistants\jlib\jnls.jar;d:\oracle\ora81\assistants\jlib\acc.jar;d:\oracle\ora81\jlib\help-3_1_8.jar;d:\oracle\ora81\jlib\ice-4_06_6.jar;d:\oracle\ora81\jlib\netcfg.jar;" DBCreateWizard -progress_only -responseFile NO_VALUE -createtype seed -numusers NO_VALUE -apptype NO_VALUE -cartridges NO_VALUE -options NO_VALUE -demos NO_VALUE -seedloc d:\oracle\ora81\starterdb -sid ora8i -orabase d:\oracle -clususer NO_VALUE -cluspswd Protected value, not to be logged -nodeinfo NO_VALUE -gdbName ora8i
Invalid Exit Code. The following result code will be used for configuration tool: 1
Configuration tool Oracle Database Configuration Assistant failed
The datafiles will be copied from the CD to d:\oracle\oradata\ora8i. The Oracle Database Configuration Assistant will begin creating the database.
An Oracle database will be created for you. The database name will be ora8i. The system identifier for the database will be ora8i. The password for the INTERNAL account will be ******, the SYS account will be change_on_install and the SYSTEM account will be manager.
Log File of Installation:
The above code is a part of the log file, which is generated by Oracle installer at C:\Program Files\Oracle\Inventory\Log\..
I just pasted the part of code, highlighted is the code showing error with Oracle Database Configuration Assistant.
Software & Hardware Configuration are as follow:
Software:
Database
Oracle 8.1.7.0.0 (Oracle8i)
Operating System
Microsoft Windows 2000
5.00.2195
Service Pack 2
Hardware:
x86 Family 6 Model 8 stepping
10
AT/AT COMPITABLE
260,400 KB RAMDont't worry about that. Before you
create a table(or view), it is wise to
drop the table(or view) with the same name.
If the name doesn't exist, of course there
is an error message. See the following script:
-------------------begin-----------
drop table students cascade constraints;
create table students (
sid varchar2(5),
fname varchar2(20),
lname varchar2(20) not null,
minit char,
primary key (sid));
--------------end-----------------
Good day!
null -
Problem when creating a sales order with reference by BAPI
I am facing one problem when creating Sales Order.
<b>The scenario is like this while creating SO With reference to an Order type, a new SO will be automatically created with a diff order Type</b>.
I am using "BAPI_SALESORDER_CREATEFROMDAT2".
I am calling this BAPI in USEREXIT_REFRESH_DOCUMENT.
Am I using the right exit to call this Bapi ?
<b>Problems are like :
1. Ref Sales Order creating without Sales Unit .
2. "Object Status does not exist" error msg is coming for Header and Item level(when clicking the status tab and then object status pushbutton).</b> But if testing the bapi from SE37 in test sequence....no such problem persists.
As for example in case of sales unit,in the debugging mode i have seen that BAPI uses a perform to fill the values in the VBAP structure.But after that when it come back to the main program VBAP remains blank.This ocuurs when the BAPI is called from the exit whereas if tested from SE37, VBAP retains the value.
Can u suggest in this ? This is very very urgent............
Thx in Adv.........................Thanks........
Your suggestion was a great help to me.I have used a custom FM and called it in <b>starting new task</b>.
Since i am a university fresher working in SAP for nearly 1 year.....can you please explain me the difference between <b>in update task</b> and <b>starting new task</b>.Why the problem was occuring for which you have suggested to call a custom function module.
what is V1 update and V2 update?Is it attached with asynchronous ans synchronous update.It would be a great help to me if you kindly clear my confusions....
thanks in advance. -
Problem when creating Database with Database, OS and hardware Configuraiton
Problem when creating Database:
There are two problems, which I faced during creation of database. When creating database with Oracle Database Assistant. One when creating pre tuned database from CD. And second when creating customized database giving options your self.
Problem # 1:
When creating pre tuned database from CD. The process of creating Database is 90 % complete and is at step # 3 Initializing Database. It gives error ORA-03113: end-of-file on communication channel.
I searched following oracle help for this problem.
ORA-03113: end-of-file on communication channel
Cause: An unexpected end-of-file was processed on the communication channel. The problem could not be handled by the Net8, two-task software. This message could occur if the shadow two-task process associated with a Net8 connect has terminated abnormally, or if there is a physical failure of the interprocess communication vehicle, that is, the network or server machine went down.
Action: If this message occurs during a connection attempt, check the setup files for the appropriate Net8 driver and confirm Net8 software is correctly installed on the server. If the message occurs after a connection is well established, and the error is not due to a physical failure, check if a trace file was generated on the server at failure time. Existence of a trace file may suggest an Oracle internal error that requires the assistance of customer support.
Conclusion:
What I conceive from this problem and the help available is that, I have to install NET8 again. But I am not sure about the solution, please tell me whether I am rite or not.
Problem # 2:
When creating database with custom option. The process of creating Database is 2 % complete and is at step # 2 Creating Database Files. It gives error ORA-12571: TNS:packet writer failure.
I searched following oracle help for this problem.
ORA-12571: TNS:packet writer failure
Cause: An error occurred during a data send.
Action: Not normally visible to the user. For further details, turn on tracing and re-execute the operation. If error persists, contact Worldwide Customer Support.
Conclusion:
What I conceive from this problem and the help available is that, I have to install NET8 again. But I am not sure about the solution, please tell me whether I am rite or not.
Software & Hardware Configuration are as follow:
Software:
Database
Oracle 8.1.7.0.0 (Oracle8i)
Operating System
Microsoft Windows 2000
5.00.2195
Service Pack 2
Hardware:
x86 Family 6 Model 8 stepping
10
AT/AT COMPITABLE
260,400 KB RAMuser563502 wrote:
I am working on Solaris 8. What is Alert_SID.log? where can I find it?
ThanksFor the responsible of the upgrade of Oracle database, not even know what Alert log is?
to be honest with you, this is not your work. -
Problem when creating Database (Database, OS and hardware Configuraiton)
Problem when creating Database:
There are two problems, which I faced during creation of database. When creating database with Oracle Database Assistant. One when creating pre tuned database from CD. And second when creating customized database giving options your self.
Problem # 1:
When creating pre tuned database from CD. The process of creating Database is 90 % complete and is at step # 3 Initializing Database. It gives error ORA-03113: end-of-file on communication channel.
I searched following oracle help for this problem.
ORA-03113: end-of-file on communication channel
Cause: An unexpected end-of-file was processed on the communication channel. The problem could not be handled by the Net8, two-task software. This message could occur if the shadow two-task process associated with a Net8 connect has terminated abnormally, or if there is a physical failure of the interprocess communication vehicle, that is, the network or server machine went down.
Action: If this message occurs during a connection attempt, check the setup files for the appropriate Net8 driver and confirm Net8 software is correctly installed on the server. If the message occurs after a connection is well established, and the error is not due to a physical failure, check if a trace file was generated on the server at failure time. Existence of a trace file may suggest an Oracle internal error that requires the assistance of customer support.
Conclusion:
What I conceive from this problem and the help available is that, I have to install NET8 again. But I am not sure about the solution, please tell me whether I am rite or not.
Problem # 2:
When creating database with custom option. The process of creating Database is 2 % complete and is at step # 2 Creating Database Files. It gives error ORA-12571: TNS:packet writer failure.
I searched following oracle help for this problem.
ORA-12571: TNS:packet writer failure
Cause: An error occurred during a data send.
Action: Not normally visible to the user. For further details, turn on tracing and re-execute the operation. If error persists, contact Worldwide Customer Support.
Conclusion:
What I conceive from this problem and the help available is that, I have to install NET8 again. But I am not sure about the solution, please tell me whether I am rite or not.
Software & Hardware Configuration are as follow:
Software:
Database
Oracle 8.1.7.0.0 (Oracle8i)
Operating System
Microsoft Windows 2000
5.00.2195
Service Pack 2
Hardware:
x86 Family 6 Model 8 stepping
10
AT/AT COMPITABLE
260,400 KB RAMuser563502 wrote:
I am working on Solaris 8. What is Alert_SID.log? where can I find it?
ThanksFor the responsible of the upgrade of Oracle database, not even know what Alert log is?
to be honest with you, this is not your work. -
Please help. When exporting a 720p video using Quicktime Conversion in FCP it saves some extra temporary files to my computer. The temporary file it saves is called ICMMultiPassStorage. This file gets so large that eventually the program and exporting process crashes. I have been able to locate the file using GrandPerspective and close out of FCP to delete it. But when I try exporting the movie again it creates the ICMMultiPassStorage file again. I have made sure my scratch disks are set to my external hard drive so I know that isn't the issue. How do I fix this problem so these temporary files are not being stored on my internal hard drive instead of my external?Thanks!
Try exporting the timeline "using current settings" via Make QuickTime Movie, then submit that clip to Compressor for the transcode. This should be faster and less painful.
-
Problem when creating connection pool for Informix
Hi all,
could you please help me to create a connection pool for informix?
I use a com.informix.jdbcx.IfxXADataSource driver and here are the properties
user=informix
password=informix
url=jdbc:informix-sqli://TW010766:1526/vka:informixserver=TW010766
dataSourceName=TestEntityPool2
portNumber=1526
databaseName=vka
ifxIFXHOST=TW010766
serverName=vka
Here is the error message :
Error during Data Source creation: weblogic.common.ResourceException: DataSource(TestEntity)
can't be created with non-existent Pool (connection or multi) (TestEntityPool2)
at weblogic.jdbc.common.internal.JdbcInfo.validateConnectionPool(JdbcInfo.java:127)
at weblogic.jdbc.common.internal.JdbcInfo.startDataSource(JdbcInfo.java:189)
at weblogic.jdbc.common.internal.JDBCService.addDeploymentx(JDBCService.java:293)
at weblogic.jdbc.common.internal.JDBCService.addDeployment(JDBCService.java:270)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:375)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployments(DeploymentTarget.java:303)
at weblogic.management.mbeans.custom.DeploymentTarget.updateServerDeployments(DeploymentTarget.java:256)
at weblogic.management.mbeans.custom.DeploymentTarget.updateDeployments(DeploymentTarget.java:207)
Could you please tell me what's wrong with the configuration?
Many thanks in advance.
HoangHoang Nguyen wrote:
For JBuilder :
URL : jdbc:informix-sqli://tra019746:1526/vka:informixserver=vka
Driver : com.informix.jdbcx.IfxXADataSource
username : informix; password : informix
For WebLogic :
URL : jdbc:informix-sqli://tra019746:1526/vka:informixserver=vka
Driver : com.informix.jdbcx.IfxXADataSource
Properties : password=informix
user=informixOk. The problem may have to do with your reiterating all the properties below.
url=jdbc:informix-sqli://tra019746:1526/vka:informixserver=vka
portNumber=1526
databaseName=vka
serverName=vka
ifxIFXHOST=tra019746All these above are implicit in the URL you give to jBuilder and weblogic.
Try defining the pool with only the user and password as properties.
>
>
Error:
Error during Data Source creation: weblogic.common.ResourceException:
DataSource(TestEntity)
can't be created with non-existent Pool (connection or multi) (TestEntityPool2)
at weblogic.jdbc.common.internal.JdbcInfo.validateConnectionPool(JdbcInfo.java:127)
at weblogic.jdbc.common.internal.JdbcInfo.startDataSource(JdbcInfo.java:189)
at weblogic.jdbc.common.internal.JDBCService.addDeploymentx(JDBCService.java:293)
at weblogic.jdbc.common.internal.JDBCService.addDeployment(JDBCService.java:270)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:375)
Thanks Joe
Hoang Nguyen wrote:
Joseph,
The driver that I use comes from informix.
I've tried with JBuilder and no problem. JBuilder can connect to informixand
I can see the tables from JBuilder.
There's something wrong in the configuration with Weblogic.
Many thanks for your help.I understand that there's something wrong with the configuration with
weblogic,
but the problem is due to a mistake in the input you gave to the pool
definition,
and I want to solve that. Please show me the URL, driver name and properties
you give to JBuilder to make Informix connections. Also, show me the
first few lines
that get printend out when you run the weblogic start script. I want
to see the
line that prints out the classpath used in the script for starting the
server.
thanks,
Joe
Joseph Weinstein <[email protected]> wrote:
Ok, I would like you to download Informix's driver from them, and
run one of their example programs, just to prove you can connect to
informix, using their driver, with no weblogic in the picture. We
have
to establish that, because that's all weblogic will be doing anyway.
Once
we know how to connect to informix via JDBC, we can do weblogic stuff.
Joe
Hoang Nguyen wrote:
Hi,
I forgot to mention that I'm working with Weblogic server 7 and
Informix 2000 9.20.
For the configuration, I followed the example given by Weblogic
http://edocs.bea.com/wls/docs70/jdbc/thirdparty.html#thirdparty001,
table 5.2
Here is the example given by weblogic :
user=username
url=jdbc:informix-sqli://dbserver_name_or_ip:port_num/dbname:informixserver=dbserver_name_or_ip
password=password
portNumber =port_num;
databaseName=dbname
serverName=dbserver_name
ifxIFXHOST=dbserver_name_or_ip
If you take a look at the link, you'll see a note :
"In the Properties string, there is a space between portNumber and=". I've tried
that but it seems that this bug had been resolved. When I put the
space,
I've
an number exception.
Thanks for your help.
Hoang
Joseph Weinstein <[email protected]> wrote:
Nguyen Hoang wrote:
Hi all,
could you please help me to create a connection pool for informix?
I use a com.informix.jdbcx.IfxXADataSource driver and here are
the
properties
user=informix
password=informix
url=jdbc:informix-sqli://TW010766:1526/vka:informixserver=TW010766
dataSourceName=TestEntityPool2
portNumber=1526
databaseName=vka
ifxIFXHOST=TW010766
serverName=vka
Here is the error message :
Error during Data Source creation: weblogic.common.ResourceException:DataSource(TestEntity)
can't be created with non-existent Pool (connection or multi)
(TestEntityPool2)
This means the pool was unable to make an informix connection withthe
properties
you gave. Please show me the few lines from an informix driver
example
program
that makes a successful JDBC connection to the DBMS you want, andI will
show
you how to define a pool for weblogic to do the same.
Joe
at weblogic.jdbc.common.internal.JdbcInfo.validateConnectionPool(JdbcInfo.java:127)
at weblogic.jdbc.common.internal.JdbcInfo.startDataSource(JdbcInfo.java:189)
at weblogic.jdbc.common.internal.JDBCService.addDeploymentx(JDBCService.java:293)
at weblogic.jdbc.common.internal.JDBCService.addDeployment(JDBCService.java:270)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:375)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployments(DeploymentTarget.java:303)
at weblogic.management.mbeans.custom.DeploymentTarget.updateServerDeployments(DeploymentTarget.java:256)
at weblogic.management.mbeans.custom.DeploymentTarget.updateDeployments(DeploymentTarget.java:207)
Could you please tell me what's wrong with the configuration?
Many thanks in advance.
Hoang -
Problem when creating CAF Entity Service finder Methods
Guys,
Can any one please suggest me appropriatly to the below problem.
I am using NWDS 7.06. I have no problem when creating CAF project, Application Service and Entity Service even.
But in the Entity Service:
1. Add a string or longtext attribute.
2. try to create a custom finder method in operations tab, during that operation i am not finding the attribute which i have created in step1.
That means i am not able to create the my own finder methods with parameters.
I was able to do that in some version long ago but i have forgotten that NWDS version.
summary of Problem Is: " Cannot create custom methods with custom parameters in Entity Service"
Can you please suggest me the right version or a solution to this problem on urgent basis please.
I promise you that i will give you full points to you who ever gives me the right solution.
Please mail your suggestions to [email protected]Guys,
I have solved the problem successfully. Thanks for your attention. -
Problem when creating contract with foreign trade / customs
Hi,
I encountered a problem when creating contract / outline agreement.
I used ME31K to create a contract with a vendor outside of our country. I suppose that I should be able to see "Foreign Trade / Customs" in "Header" menu, but this entry is gray, I cannot enter it.
I tried to create a scheduling agreement using ME31L with the same vendor and material, I can see "Foreign Trade / Customs" information. I suppose these two process are similar, aren't they?
Btw., I checked the master data according to this thread:
http://help.sap.com/saphelp_46c/helpdata/en/ed/3b6cc697e711d1b4e20000e82d81b0/content.htm
Can anyone give me some hint?
Thanks!
CharlieThese two processes are different:
The Contract agreement or the Outline Agreement is that create the centrally contract (cross-plant) where it can maintain different pricing conditions for each and every plant. It creates the Release Order with reference to Outline Agreement. No detailed delivery schedule can be made in the Release Order. No Release documentation is created. Only time-dependent conditions can be created, Some Item Category 'M' and 'W' can be used.
Whereas the Scheduling Agreement is the Plant Location what must be entered in the Scheduling Agreement. Its no need to create any other purchasing document except for delivery schedule line via Transaction ME38 or MRP running (with the appropriate setting of Source List). Delivery Schedule line items are created subject to your specific requirement. It can create both Scheduling Agreement with or without release of Documentation (subject to the Document Type LP or LPA) with the selection of either FRC or JIT delivery schedule. Either time-dependent or time-independent conditions can be created subject to the customizing in the Document Type of the Scheduling Agreement. Item Category 'M' and 'W' can not be used. -
Please help! When I restore on my ipad I get an error message of 1604 and I have tried all the recommended steps! Does anyone have the same problem?
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
Cheers, Tom -
Problem when creating business partner
Dear Expert,
I have a problem when creating business partner from T-code BP
I can't input vendor number in company code header data
The vendor account field is set to required entry.
When create business partner, I make some entry like :
Business partner category : organization
BP Role : Landlord with vendor account
Grouping : external number assignment
Company Code : 1000
The problem is everytime i try to input vendor number, it always failed.
The Vendor account field always display ' <external> '
It's strange.. the vendor field it's seem locked by grouping
What should I do??
___Company Code Header Data___
Company Code : 1000
Customer : <external>
Vendor : <external>
I need your advise.. thank you very much
Thanks,
tweetyHi,
I would like to suggest you some SAP notes that contain useful information aobut customer-vender intergration of ERP2005.
956054 BP_CVI Customer-vendor integration as of ERP2005 (ECC600)
This notes describes the changes (new development) of CVI AND the necessary customizing settings.
In short, CVI is now bidirectional.
1. BP -> Customer/Vendor: it depends on the roletype configuration, if a customer/vender is created.
2. Customer/Vendor -> BP: it depends on the account group if a BP is created.
Data is changed then synchronoously.
Further notes that might be of interest.
851445 BP_CVI: Details about reports to be executed for ERP 2005
727205 Conversion of industry Customizing in BUPXPRA12
1077616 Business Partner Upgrade FAQ
If you have further questions please let me know.
Regards, Franz -
Hello, Please Help!
When I bring the mastered audio from Soundtrack pro back to final cut pro 7, the audio plays well at the beginning 3 mins later it doesn't sync.
Please Help!!!
EdgilMake sure your easy setup has the correct frame rate for your sequence. Seems crazy but somehow or other fcp assigns a frame rate to audio files. I've found this can sometimes be tricky to get right. Here's what I've done to force the issue. Make sure the easy setup frame rate reflects that of the target sequence in fcp. Create a new project. import the audio in the new project. And then copy the clip from the new project to your main project.
Good luck -
rt ,
This is ***majed*** ,I can't remember my security question answers , so Please help me to Create new Security Question for my Account .
Best wishes,If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then the steps half-way down this page give you a reset link on your account : http://support.apple.com/kb/HT5312
If you don't have a rescue email address (you won't be able to add one until you can answer your questions) then you will need to contact iTunes Support / Apple in your country to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the HT5312 link above to add a rescue email address for potential future use -
I can't remember my security question answers , so please help me to Create new Security Question for my Account : **********
, Best wishes
<Personal Information Edited by Host>We are fellow users here on these user-to-user forums, you're not talking to iTunes Support nor Apple - I've asked the hosts to remove your email address from your post (it's not a good idea to post personal info on any public forum).
If you have a rescue email address (which is not the same thing as an alternate email address) on your account then the steps half-way down this page will give you a reset link on your account : http://support.apple.com/kb/HT5312
If you don't have a rescue email address (you won't be able to add one until you can answer your questions) then you will need to contact Support in your country to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the HT5312 link above to add a rescue email address for potential future use
Maybe you are looking for
-
Cannot mount Windows partition with boot loader on Mac OS 10.8
I took out my hard drive of my Windows 7 PC, which has 3 partitions on it: C drive which contains the OS and the boot loader that the computer boots into, D drive which contains my data, and a third called "System Reserved" a few megabyte in size tha
-
Urgent(Check Details)
Which table contains the following fields? 1. Check no. 2. Check Date 3. Check Amount
-
The reporting point backflush is not possible for make-to-stock repetitive
Hi All, we are using the assembly backflush in the MTS REM process. we are need to do the reporting point backflush if we tick against the RP backflush. what will be the effect in the process while confirmation. i read the sap library . it say like T
-
Adobe Indesign 3 Menu grayed out
All the tools in the menu along the top are grayed out. They are unworkable. Also when I initially open Indesign 3, the title page opens but lacks the green and red button on the upper left corner and seems disabled. I reinstalled Indesign 3 and thou
-
Hi All, I'm new to OIM 11g.I'm trying to create user using web interface and user is successfully created but no OOTB email notification are triggering.. I have configured Mail Server It Resource. IT Resource Name Email Server IT Reso