Please help, problems running recovery

hi, i have a satellite P755-S5262 RUNNING WINDOWS 7 64BIT WITH AN i7 PROCESSOR
when i first got my laptop i was having some minor problems with it so i did a restore from the harddrive and that fixed things up. i made some recovery media and the went about setting it up, the made a backup with nere back it up 11.  later on more problems and i tried to restore from nero back up and backup didn't work so i tried recovery and it won't recover from the hard drive but my recoverey media worked and everything was fine.  so one late sleepy night 
i triede to install some free software which didn't work so i uninstalled it using REvo uninstall and made a bad mistake, windows would not boot. most of the repair options, including toshiba recovery were not coming up.
i had my media but after inserting disc one it said files were loading and the nothing happened.  anyway i finally got
recoverey to come up but after choosing out of box recovery with partitions the same i got thew message preparing partitiuons and the error 08-0E89-0000 PARTITION preperation failed
please help!

If the problem is with the recovery media, ordering replacement recovery media might be able to help.
If that doesn't work, it could be a failing hard drive.
- Peter

Similar Messages

  • I keep on getting this error when i try to copy files to my 2T Time Capsule, Please help im running out of space on my MacBook Pro.... The operation can't be completed because an unexpected error occurred (error code -50)

    I keep on getting this error when i try to copy files to my 2T Time Capsule, Please help im running out of space on my MacBook Pro....
    The operation can’t be completed because an unexpected error occurred (error code -50)

    I would get an external drive today and copy all your stuff off the TC.. forget trying to load more onto it. There is a good chance after 3years (A 2TB should be only about 2years tops), the disk or the TC itself is on the way out. Do it immediately. If TM is also failing to backup you need to recognise symtoms of impending doom.
    Unfortunately the error messages are archane and it is hard to discover their meaning.
    You also cannot verify a network drive.. you can verify the TM sparsebundle though so do that.
    A5. http://pondini.org/TM/Troubleshooting.html
    Reboot the whole network from off.. certainly if you run later OS it can simply lose the drive..
    If you still fail to be able to copy to the TC.. then get that external and copy off it. Tell us if you can do that.

  • Premiere Pro CS5: please help problem with importing a file error output "there was an error decompressing audio or video"

    please help problem with importing a file error output "there was an error decompressing audio or video"

    this is related to what adobe program/version?

  • I forgot restrictions cod in ipad air1 and don't off it , please help me for recovery this cod

    i forgot restrictions cod in ipad air1 and don't off it , please help me for recovery this cod...

    Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
    A
    1. iOS- Forgotten passcode or device disabled after entering wrong passcode
    2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    3. Restoring iPod touch after forgotten passcode
    4. What to Do If You've Forgotten Your iPhone's Passcode
    5. iOS- Understanding passcodes
    6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    7. iOS - Unable to update or restore
    Forgotten Restrictions Passcode Help
                iPad,iPod,iPod Touch Recovery Mode
    You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
    You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
    Also, see iTunes- Restoring iOS software.
    And also see How to Recover Forgotten iPhone, iPad Restrictions Passcode.

  • Problems installing ...please help..running out of time

    Iam trying to install 9ias application server 1.0.2.0 on win NT, and iam getting the error..
    THE SPECIFIED KEY VALUE WAS NOT FOUND WHILE TRYING TO GET VALUE.
    Please help.

    We may need more information on the circumstances associated with the user's
    machine and their install session, but here's a few tips to share:
    1. Ensure that the user is logged in as Administrator or equivalent and has
    write access to the registry.
    2. If running from a network drive mapping, make sure the drive mapping is
    permanent or persistent so after login it will be remapped if your system
    requires a reboot during install.
    3. Make sure the user is launching the install from the iSetup.EXE located
    in the root of Disk 1 and not from any other SETUP.EXE. The sole exception
    to this is for silent installs, which is covered in Chapter 6 of the install
    guide.
    4. If OUI displays an error message, don't panic. Most OUI dialogs have a
    help button with some useful information, and other errors will be written
    to the InstallActions.log file, located in the C:\Program
    Files\Oracle\Inveltory\logs directory. When an error is displayed, don't
    click OK before you have had a chance to open this log file and review the
    last few lines in the log.
    Looking in the log file will be particularly useful for this error because
    the OUI script appears to be looking for a registry entry that is not
    present on the user's machine. Most likely, the user didn't launch
    iSetup.EXE from the CD root.
    Thanks,
    Bij

  • Problem running Recovery

    Hi,
    I have a Compaq Presario CQ61-318SO with Windows 7 64bit. Yesterday, I dropped my laptop accidently and after that I tried to start the laptop but I got the following message:
                                                                                                       Windows Boot manager
    Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
    1. Insert your windows installation disc and restart your computer.
    2. Choose your language settings, and then click "Next"
    3. Click "Repair your computer"
    if you do not have this disc, contact your system administrator or computer manufacturer for assistance.
    status: Oxc0000225
    Info: The boot selection failed because a required device is inaccessible.
    Enter= Continue                                                              Esc= Exit
    After the message, I clicked on Continue, it happened nothin. Then I restarted and ran hard disk test . The result was "hard disk not Exist".
    After that I changed the boot  order to CD and tried to run recovery form my recovery CDs' but after loading files and showing windows logo it showed only an arrow with black screen and nothing happened.  
    Can anybody tell me is my "Hard disk" which is faulty and need to be replaced or do I need to order new recovery dics?
    I also opened hard disk cover and slackened the hard disk screws and tried to see if any thing wrong with hard disk like if anything is broken but I saw nothing. I tried to shaken the hard disk and I heard a noise that may b a screw or else is colliding with other parts of hard disk. I dont know if it is normal.
    Anybody please help!
    Thanks in advance,
    Kashif

    RNR is attempting to call Windows VSS(volume shadow service).SHADOW: Call to InitializeForBackup failed - dwRet = 0x000005a4 - hrRet = 0x80042302hrRet = 0x80042302 is the windows return codedwRet = 0x000005a4  is a RNR return code. Check to make sure the VSS service is started in windows services.Name: Volume Shadow Copy     Start Type should be AutomaticAdmin tools>services  to bring up the services screenhttp://www.sevenforums.com/backup-restore/218352-volume-shadow-service-component-error-0x80042302.html http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/error-code-0x80042302-while-performing-system/3a456d69-e556-e011-8dfc-68b599b31bf5 Within the microsoft link is  this reply:To fix this error, go to the 'run command' and type in "services.msc"
    ensure that the following services are set to automatic:
    > "System Event Notification Service"
    > "COM+ Event System"
    > "COM+ System Application"
    > "Virtual Shadow Copy"   

  • Please Help : Cant Run Downloaded Apps

    Hi, I have a new 16gb Iphone bought yesterday in Australia.
    After setup I went to the app store and tried to download two free apps. They downloaded and installed ok.
    Problem: When I try to run them the apps start to run but then abort back to the home screen and wont run.
    I have tried restoring factory defaults via Itunes but that didnt seem to fix it.
    Apps that come with the Iphone work.
    I went to the store I bought it from and they dont know whats wrong and offered to get it repaired but I dont want to be without my Iphone. Im not sure if it is actually broken anyway.
    Please help, Im desperate

    The I Phone apps do work, but not if you have the latest software, if we can find a way of reverting it back a version everything will be o.k. The I Phone is not a great phone (very basic for texting and phone calls, you can't forward on messages or create contact groups etc...) but as an internet music video player it's o.k.
    Hopefully with more updates it will improve in speed and functionality, you could take it back until that happens!?
    Ban

  • , please help problem downloading apps since update

    Why can't i download apps since i updated to i06, i  log in with password .am then asked for three security questions fill this out click done and get the answer timed out try again, what is causing this please help.

    Settings>General>Reset (at the far bottom)>Reset All Settings
    That will ALWAYS work for the "3 Security Questions - Timed Out problem".  No data will be lost, but your network settings will be reset.

  • Please help stuck in recovery mode

    Hi can someone at apple please help me. I was updating my ipod to ios 8.3 when it was half way done i accidentally shut it of. Now my ipod is stuck in recovery mode. When i try updating it via itunes i tried to update it however it keeps saying that it will take over 500 hours and i also have a very good inter net connection and now i dont know what to do. someone please help me!!!!

    Placing your device into recovery (DFU-Device Firmware Upgrade) mode:
    Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
       1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
           other end of the cable connected to your computer's USB port.
       2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
           until the red slider appears, then slide the slider. Wait for the device to turn off.
                  * If you cannot turn off the device using the slider, press and hold the
                    Sleep/Wake and Home buttons at the same time. When the device turns off,
                    release the Sleep/Wake and Home buttons.
      3. While pressing and holding the Home button, reconnect the USB cable to the
           device. The device should turn on. Note: If you see the battery charge warning,
           let the device charge for at least ten minutes to ensure that the battery has some
           charge, and then start with step 2 again.
      4. Continue holding the Home button until you see the "Connect to iTunes" screen.
           When this screen appears you can release the Home button:
      5. If necessary, open iTunes. You should see the following "recovery mode" alert:
      6. Use iTunes to restore the device.
    If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

  • Please help - problems with iPod Nano

    I saw a page in my Popular Science magazine and it had iPod Linux. So I went to the website installed it, and it worked!!! But the problem is , is that when I plug it in to my computer, it charges but won't show up as a drive. Please help!!!!!!!!!!!!!

    Even within the iPod Linux Project the Fifth Generation iPod and the Nano are unsupported hardware so you are pretty much on you own, however check these links out:
    iPod Linux Unsupported - What if Something Goes Wrong
    iPod Linux Project- My iPod is really messed up, how can I fix it?

  • Please Help: Problems w/Frames and Rollovers

    I've been having a problem recently w/making rollovers in
    Fireworks 8. Whenever I change the color of the text (intended to
    be made into a rollover link) in one frame, it changes the color of
    that text in all of the frames. I've never had this happen in the
    previous software version. Please help! Thanks!

    PSparky wrote:
    > I've been having a problem recently w/making rollovers
    in Fireworks 8. Whenever
    > I change the color of the text (intended to be made into
    a rollover link) in
    > one frame, it changes the color of that text in all of
    the frames. I've never
    > had this happen in the previous software version. Please
    help! Thanks!
    Make sure that Share Across Layers, and Share Across Frames
    are unchecked.
    Linda Rathgeber [PVII] *Adobe Community Expert-Fireworks*
    http://www.projectseven.com
    Fireworks Newsgroup:
    news://forums.projectseven.com/fireworks/
    CSS Newsgroup: news://forums.projectseven.com/css/
    http://www.adobe.com/communities/experts/

  • Urgent: please help for DB recovery

    We lost our Oracle database 10g 10.2.0 server hard drives. The OS is Windows Server 2003. I only have the following files in a backup flash_recovery_area on my external drive. Can I recover the data?
    Serval backup files like: O1_MF_NCSN1_TAG20081023T030058_4J08B510_.BKP
    All the dbf files:
    O1_MF_PJT_408NOMDR_.DBF
    O1_MF_EXAMPLE_408NP1MM_.DBF
    O1_MF_PROJECT_408NOTHP_.DBF
    O1_MF_SYSAUX_408NOD8V_.DBF
    O1_MF_SYSTEM_408NNX6F_.DBF
    O1_MF_UNDOTBS1_408NP4Q0_.DBF
    O1_MF_USERS_408NP5SG_.DBF
    Please help! Thanks a lot!

    Technical Assistance Request. Call Oracle support.

  • Please help: problem configuring a SQL server datasource in Websphere.

    I am using Rational Developer 6 and its integrated testing server (websphere v6). When configuring a data source for SQL server, I did the following steps in admin console of the test server:
    1. Created a JDBC provider, using WebSphere embedded ConnectJDBC driver for MS SQL Server;
    2. Created a datasource under the previously created JDBC provider, filled in the server name, DB name and port number (1433 for SQL server);
    3. Created a J2C authentication alias that has the login info of SQL server;
    4. Assigned the created J2C alias to both component and container managed authentication alias;
    However, when I click "Test Connection", it always gets back to me with an error "java.lang.Exception: java.sql.SQLException: [IBM][SQLServer JDBC Driver]Error establishing socket. Connection refused: connectDSRA0010E: SQL State = 08001, Error Code = 0.".
    My ultimate goal is to configure a SQL server datasource so that I can configure Kodo to use this datasource.
    Can some one please help? Thanks in advance.

    Try this:
    http://www-1.ibm.com/support/docview.wss?uid=swg21210871
    I am yet to test this. I am going to download latest SP for SQL Server 2000 and install it. I hope it will do the magic.

  • Please help,problem when creating Jar.

    I am somewhat new to Java...But I made a simple program,and then tried to create a Jar file.
    Now all my Java commands where in /program files/Java/JavaSDK/Bin,it was a hassle to CD to that everytime I wanted to use a command,so I coppied all the commands in BIn directory,and put them in System 32,I suppose this is ok? That was my first question.
    My next one is,when i try creating a Jar file..I suppose I am doing ti right,but the entire command prompt fills up with code,the ASCII and all the symbols....and a REALLY loud constant beep comes from my computer,and speakers..and it seems it doesnt create anything by this code in the screen and th noise..
    Please help.

    My next one is,when i try creating a Jar file..I
    suppose I am doing ti right,but the entire command
    prompt fills up with code,the ASCII and all the
    symbols....and a REALLY loud constant beep comes from
    my computer,and speakers..and it seems it doesnt
    create anything by this code in the screen and th
    noise..It is from jar help:
    Example 1: to archive two class files into an archive called classes.jar:
    jar cvf classes.jar Foo.class Bar.class
    Example 2: use an existing manifest file 'mymanifest' and archive all the
    files in the foo/ directory into 'classes.jar':
    jar cvfm classes.jar mymanifest -C foo/ .

  • Please help - Problem with loading swf's (running very slowly)

    Hi
    I have posted this problem up in the last few days so I built a quick demo of my problem. Can somebody please download it and take a look at it and see what I'm doing wrong?
    You can download it here at:
    http://www.bounceworld.ie/download/Demo_Test.zip
    The external swf's when loaded.....run very very slow; sometimes unresponsive as if there is a script running in the background. I'm using keyboard commands to navigate through the screens - eg:
    on (keyPress "<Space>") {
    gotoAndStop("scene02", "firstframeLabel");
    Thank you for your help!!!!

    Hi
    I'm trying to use Key Listeners to solve my problem.
    I don't know much about key liseners so can somebody help me out.
    I have the following on a keyframe yet it still wont jump to the certain frames when I press the relevent keys. Am I missing something?
    stop();
    KeyListener = new Object();
    KeyListener.onKeyDown = function() {
    if (Key.getAscii() == 38) {  // UP key
    gotoAndStop(89);}
    if (Key.getAscii() == 40) {  // DOWN key
    gotoAndStop(91);}
    if (Key.getAscii() == 37)  // LEFT key
    gotoAndStop(88);}
    if (Key.getAscii() == 32) {  // SPACEBAR key
    loadMovie("application_01.swf", "container");}

Maybe you are looking for