Please Help! Problems with Windows Vista 32-bit on Boot Camp (Wireless/Etc)

We recently purchased a new aluminum Mac Book (13 inch) with Leopard (10.5.4). I attempted to install Boot Camp and Windows Vista 32-bit. I can successfully alternate between both operating systems with no problems. However, I am having 2 problems:
1) I cannot connect to wireless internet. No connections will even show up when I attempt to connect, its almost as if an adapter hasn't been installed.
2) I cannot set up the trackpad to do right click.
I've read articles everywhere and nothing has helped. Can anybody please help me??? Any support/advice is greatly appreciated. Thanks in advance!
- Pierce

dpierceNKC:
Welcome to the Apple discussions.
It appears that you may not have installed the boot camp drivers. Boot into Windows and insert your Leopard installation disk in the CD/DVD drive. This should automatically begin installation of the necessary drivers. Reboot the computer when instructed and all the hardware should work as designed.
The right click is accomplished by placing two fingers on the trackpad and then depressing the trackpad button. This should also work after the drivers are installed as instructed above.
Axel F.

Similar Messages

  • Flash player 11.0.1.152 installation problem with Windows Vista 64-Bit

    Hello,
    I just can't get Flash Player to install on my computer with Windows Vista 64-Bit - doesnt matter if I try with Firefox, Opera or IE (I usually use Firefox).
    The download isn't a problem, but when I start the downloaded .exe, this file just disappears from my download folder and nothing happens - besides starting a process called install_flashplayer11x32_mssd_aih_3.exe, which does nothing. The usual installation popup never appears. After that I can't try starting the installation again, until disabling the process via task manager ("Only a single instance of this application may run"). Doesn't matter if I try the download and installation with or without "McAffe Security Plus" btw - same result.
    I never had such a problem before - Flash Player 10.3 was and is no problem to install and use.
    I have tried all the measures suggested in the troubleshooting section on the official site, including the advanced troubleshooting measures (uninstall old version, run as administrator, disabling software firewalls, disabling virus scanner etc.). Nothing helps.
    I don't got those problems with my laptop running Windows 7 - just my desktop computer with Vista 64-Bit.
    Any help would be greatly appreciated.

    Try using the installers from the links in http://forums.adobe.com/thread/909550
    P.S. topic moved to the Installation section of the forum.

  • Crysis Warhead 64-bit Won't Work with Windows 7 64-bit Under Boot Camp

    Hi. I installed the patch 1.1 for Crysis Warhead which has the 64-bit version of the game which I'm running under Windows 7 64-bit on Boot Camp and I've tried the the compatibility mode (Vista to Vista SP2). I've also updated the ATI drivers as well as the Boot Camp drivers. I'm using the latest Snow Leopard.
    When I click on the game's application (64-bit version), it would launch then it goes black with just the mouse cursor (you can move it about) which seems to be in low resolution and I guess it would crash so I would push the button on this late iMac 2009 and Windows would go back to the desktop then shutdown.
    Has anyone made Crysis Warhead 64-bit work with Boot Camp Win7 64-bit with this iMac (it has the ATI 4850)? Is this because it's Boot Camp or that it's Windows 64-bit or is it the ATI graphics chip? Thank you in advance. Gbu.
    Message was edited by: Alvin777

    since bootcamp allows windows to run natively, it's not an imac issue, but rather an issue with your windows, so you probably get better answers in a windows forum or the crysis forums.
    in any case, installing newer ATI drivers (ati.com) might help, but it's just a wild guess

  • Please help. my computer is hp with windows vista 32 bit. I can't installe itunes . not the new one or and old one. i have try to uninstalle itunes and reinstall itunes again but it didn't work. please help

    please help. my pc is a hp with windows vista 32 bit. I can't install itunes 10,5. I have try to remove my old itunes and reinstall but it didn't help. I have install itunes 9.1.1 but the itunes library can't be read because it is on a new itunes. I hope someone can help. I'm lost.

        Deauthorize all of your computers and authorize the computers you use.
        http://support.apple.com/en-us/HT6283
      A new Mac comes with 90 days of free tech support from AppleCare.
      AppleCare: 1-800-275-2273
    Best.

  • Help, hotsync palm treo 755p to my laptop with windows vista 64 bit.

    I am computer unsavy and could use some help.  I have a palm treo 755p that previously synced with my old dell laptop.  That computer broke, and I got a new HP with windows vista 64 bit.  Previously, the dell was running windows xp.  I have bought some new software, which I have downloaded to my laptop, and am trying to sync my palm to the new computer so that I can download the program to the computer.  However, after installing the Palm Hotsync Manager and other software, and when I trying to sync, the computer does not seem to recognized my palm, and times out after a while stating "the connection between your handheld computer and the desktop could not be established.  Please check your setup and try again.
    Post relates to: Treo 755p (Sprint)

    Palm OS devices will only sync to 64bit through Bluetooth. We have a stickie concerning this. It's the third topic down under windows hotsync. Does your computer have Bluetooth?
    Post relates to: None
    Message Edited by legendeld on 11-19-2008 07:36 AM

  • Hp pavilion dv6-1030us with windows vista 64 bit now upgraded to windows7 32 bit.

    hp pavilion dv6-1030us originally with windows vista 64 bit now upgraded to windows7 32 bit. mic is unable to send sound in skype after upgradation.
    This question was solved.
    View Solution.

    Hi,
    Try the following.
    First, uninstall Skype and when this has completed, restart the notebook.
    When windows has reloaded, download and reinstall the Chipset driver Here.
    When the installation has finished, restart the notebook again.
    Let windows fully load, then download the IDT Audio installer on the link below and save it to your Downloads folder.
    http://ftp.hp.com/pub/softpaq/sp45001-45500/sp45044.exe
    When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers.  Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
    When complete, shut down the notebook, unplug the AC Adapter and then remove the battery.  Hold  down the Power button for 30 seconds.  Re-insert the battery, plug in the AC Adapter and start the notebook.
    Let Windows fully load, then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation.  When this has completed, restart the notebook again.
    Reinstall Skype and see if the Mic now works Ok.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Photo sync problem with Windows Vista?

    I did some searching and was wondering if there is a solution to the photo sync problem with Windows Vista. I have gone the route of changing some of my photos to bitmap files but this is was way too much work just to view on ipod. I like to email Apple but could not find a link to do so. As far as I know I have all updates but still the iPod does not sync photos. Is there an update to this that I am missing or am I stuck changing all my photos to .bmp files?
    Thanks,
    Dean.

    I checked out the article and not much help, thanks anyway.
    Would it make a difference if I purchased Adobe Photo Album or would I still be stuck with changing and saving files to .bmp extensions? I have Adobe Photoshop album starter but still have to change file extensions.
    If someone has a solution to this problem I would really be greatfull. I did contact Dell as this is a brand new computer and that was a wash. They did give me a number for Apple but of course I bought the iPod off of ebay and has no warranty on it so unless I pay a fee I'm not calling. It just blows my mind that Microsoft and Apple can't or won't come up with a fix. But I guess when Microsoft wants you to buy the Zune or Apple wants you to buy the overpriced Macintosh why would they waste time on having there products compatible with each other.
    Thanks.

  • Want to use Premiere Elements 4 or newer with Windows Vista 64 bit??

    We bought a new pc with Windows Vista 64 bit - but are now having problems using my Photoshop Elements6 and Premiere Elements 4 with our new pc.  it says on the box and on the web - that it is compatible with Vista - so why isn't it working for us?  Do i need to buy something else - and if so what?

    I am not sure completely about Photoshop Elements - but my main issue is with Premiere Elements....i need to find a program that will work so i can work with all my videos.  Trying to find out why it doesn't work or how to get it to work.
    Date: Mon, 8 Jun 2009 21:24:11 -0600
    From: [email protected]
    To: [email protected]
    Subject: want to use Premiere Elements 4 or newer with Windows Vista 64 bit??
    What problems with PSE?
    >

  • I am trying to install itunes on my hp laptop with windows vista 64 bit. But when i install i get this error "An error occured during the installation of assembly "Microsoft.VC80.CRT.type="win32"version="8.0.50727.6195".publickeyTOken="1fc8b3 b9a1e18e3b".

    I am trying to install itunes on my hp laptop with windows vista 64 bit. But when i install i get this error   "An error occured during the installation of assembly "Microsoft.VC80.CRT.type="win32"version="8.0.50727.6195".publickeyTOken="1fc8b3 b9a1e18e3b".processorArchitecture="x86""

    Repair your Apple Application Support.
    Control Panel > Programs n Features > highlight AAS, click CHANGE the REPAIR

  • Problems with Windows VISTA and WPA-2

    Hi Guys,
    I am using a Linksys router supporting draft-N; it seems that after some time of usage; Windows Vista stop being able to connect to Linksys using a WPA-2 PSK.
    Everytime you search for the SSID and attempt to connect, the ''network is taking too long to connect''' and Windows always informs the user that ''limited or no connectivity'' even though the signal strength is excellent.
    Is that a common problem in Windows Visa (I am using Home Edition)?

    Yes thats the basica command problem with Windows Vista while connecting to the Wireless Network.... In this you can need to update your Windows Vista OS with all the Latest Patches and the Service Pack to improve more stability on your Vista Computer to get connected to the Wireless Network..

  • Premiere Pro CS5: please help problem with importing a file error output "there was an error decompressing audio or video"

    please help problem with importing a file error output "there was an error decompressing audio or video"

    this is related to what adobe program/version?

  • IPhone 3GS SYnc problems with Windows 7 64 Bit

    I am having sync problems with windows 7 64 Bit.
    The iPhone syncs a few tracks then hangs, a few minutes later itunes tells me the iphone has timed out.
    Anyone have any ideas about this. I have tried different USB ports, cleaned the apple USB cable contacts with Servisol, restored the iPhone and reinstalled itunes.
    iPhone and iTunes are latest versions.
    Thanks
    Joe

    "Try this connect the iPhone, let the mtp driver installation fail, then go into the device manager and uninstall the unknown mtp device. If you then scan for new hardware from the device manager it should recognize the iPhone & update the driver."
    Ok here's what I did:
    1) Connect the iPhone (iTunes had been installed)
    2) No MTP driver installation is happening as Windows detects iPhone successfully
    3) Open Device Manager
    4) There seems to be 2 drivers for iPhone that are active now, although I still can't see which one is the MPT driver you're referring to.
    One of them sits under Portable Devices: "Apple iPhone". If I view the details of this driver, it lists the following files:
    - C:\Windows\system32\DRIVERS\UMDF\WpdMtpDr.dll
    - C:\Windows\system32\DRIVERS\winusb.sys
    - C:\Windows\system32\DRIVERS\WUDFRd.sys
    - C:\Windows\system32\WpdMtp.dll
    - C:\Windows\system32\WpdMtpUS.dll
    The other one sits under Universal Serial Bus controllers: "Apple Mobile Device USB Driver". And as indicated by Joe above, it lists the following files when I view the Details:
    - C:\Windows\system32\Drivers\usbaapl64.sys
    - C:\Windows\system32\usbaaplrc.dll

  • Cannot install Windows 7 32-bit using Boot Camp

    I have one of the new iMacs (late 2012) and I can't install Windows 7 32-bit using Boot Camp. Whenever I try to being the installation using the Boot Camp Assistant, I always get the following message: "Need 64-bit Windows installation USB drive or DVD. Boot Camp only supports 64-bit Windows installation on this platform. Please use an USB drive or DVD which contains 64-bit Windows". I have successfully installed 32-bit Windows on my Macbook Pro that is running the same version of Mac OS X and Boot Camp, but I don't know why on this new iMac it doesn't allow me to. Apple's documentation states that I should be able to install either 32-bit and 64-bit without any problem, but this is not the case here. I can't find anything about this problem/error on the Internet either. HELP!!!

    AidenT wrote:
    Yes, circumstances do change but if Apple is, as they claim to be, serious about seamlessly migrating what is still a large and dominant market share of users from Windows, supporting 32 bit versions is not a nice to have, but a must have.
    I don't see why users have to make excuses when there is a clear shortfall of what is promised.
    In other discussions, there is talk of an opportunity for Apple to make a significant impact, as Windows 8 has deviated so much from the comfort zone of traditional Windows users. But to make that change, Macs have to support what is still a primarily 32 bit environment in the installed base.
    As for the use of VMs, I had a tough time migrating out of Parallels 6 after an upgrade to Mountain Lion broke compatibility so IMHO it is not a long term solution unless you are happy to hand out $50 every 2-3 years just to support the same functionality.
    Use Virtual Box, it's free.
    32 bit may have a reasonable user base but it's going away fast, if you must use 32 bit Windows and won't use a VM your choice is limited.
    Buy a PC, or buy an older Mac.
    The rest of your post is speculative and I won't go there.

  • Install Windows XP 64-bit on Boot Camp.

    Can I install Windows XP 64-bit on Boot Camp (Tiger)? Where can i find all the driver for 64-bit? Thank you.

    Hi Amen,
    XP 64-bit was never supported by Apple.
    Therefor you are left to find the needed drivers all by yourself and for Apple-specific hardware you won't find any drivers at all.
    Use the System Profiler in OS X to determine what hardware is in your Mac and then go to the websites for these hardware manufacturers to see/find drivers for XP 64-bit.
    Personally I am not sure if all this hassle is worth the outcome.
    Regards
    Stefan

  • Problem Laserjet 1000 with Windows Vista 32 bit

    Good morning. I have a laserjet 1000 connected to the USB port on another computer with windows xp and shared. I have to connect it to another pc with windows vista pc with ip address. Install the printer but does not work. I used the driver for win xp as I read on several forums but it does not work. What kind of driver should I use ?
    Can you give me some advice ?
    Thank you

    If your model is lacking the correct Vista drivers from Lenovo and Vista doesn't offer native support then I see upgrading to Windows 7 as your only option.  Here is a link to what Lenovo drivers are available.......
    http://support.lenovo.com/en_US/downloads/detail.page?&DocID=DS035825
    Owner & Operator of the following:
    ● Lenovo Ideapad Z570 w/ Win 7 & Win 8.1 Dual Boot ● Lenovo Yoga 3 Pro w/ Windows 8.1 ● Toshiba A75-S206 w/ Win 7
    ● IBM Thinkpad T-23 w/ Win XP ● IBM Thinkpad T-22 w/ Win XP • As well as multiple desktops dual/triple booting XP, Vista and Win 7.
    ★ Find a post helpful? Thank that member by clicking on the ☆Star☆ to the left awarding them a Kudo.
    ★ Posting a problem and a reply is helpful and it answers your question, please mark it as an "Accepted Solution"
    ★ I'm not a Lenovo employee, just a volunteer geek who likes to help folks. Enjoy your time here, pay it forward by helping others !
    ★ Sorry, I don't answer questions via Private Messages. Posting in the appropriate forum is the best way to get assistance.

Maybe you are looking for

  • How do I jump between spreads using apple's wireless keyboard?

    When in InDesign CS4 for Mac, I often jump to the next spread. First, I center the spread on my screen using Command+Option+0. Then, I use Option+Page up or Page down, and this takes me to the next or previous spread, and it keeps the spread exactly

  • Apple TV video cuts out after an hour

    I have been having a problem where my screen goes black after an hour, but I can still hear the sound. I switched the "Sleep After" to never, but each time I watch for an hour, the screen still goes black. It doesn't matter if I'm watching Netflix or

  • HT1498 I forgot my pass code for my Apple TV ?  Help please

    I'm stuck I need my passcode for my AppleTV  Which I forgot to do I do now?

  • Regarding vt02n Inbound delivery

    Hi,, 1 . I have a question for inbound delivery. In vt02n attachment list i have some attachments i need to read each attachment title , creator name and created on details.How can i read the values ? is there any function module to get the details.?

  • Need DME capability for payment program RFFOUS_C

    Hi, I am trying to create a DME file for Accounts Payable where we currently use the payment program RFFOUS_C. What do I need to do to get this done? Arne