Please help, project won't load

I've worked for months on this project, compiling video and photos of my son's first year. I made an awesome video, I honestly saved every 3 minutes if not more frequently. I FINALLY finshed earlier today, I went to burn it to a disc and it knocked down my whole computer and now the file won't re-load it comes up with the photos and videos in the "task bar" area on the right but doesn't show my final product. It has a red screen come up and saying Media offline. I am devistated and just don't know where to begin. any help would be greatly appreciated.
Sadly... Kim

If your computer crashed, then I would see this ARTICLE, as it sounds like more is going on, than you might realize.
I think that Steve's suggestion on looking at AutoSave PREL's is a good one too, but it could well be that the AutoSaves were Saved over.
Good luck,
Hunt

Similar Messages

Please help iphoto won't load

When I open iphoto it says "loading" but nothing loads it's as if it can't find the photos which I know are in the iphoto library. How do I get it to find the photos & display them ? Thanks

I too am in the same boat with iphoto. yesterday I was cleaning up the lose files and I think I deleted some files that make iphoto work. The only problem is that I am running 10.5.8 and the orginal discs that came with the ibook are for 10.3.9. If I redo the hardrive will that fix the issue.

IMovie 09 projects won't load HELP!

Hiya, i have searched all over theplace to try to find out why my projects wont load in IM 09, to no avail.
The below link seems to be the bestbit of information i have worked on.
I have no 3rd party plug in's in thequicktime folder.
I have deleted the last few moviesimported (despite the fact these worked and were later exported)
iMovie will load on another acct thati created, but wont be able to work with whats imported into this acct unless ire upload?
iMovie does start up, i see all myclips i have imported, but none of my projects won't load.
I do have a fair bit of footagethere, but it was working fine when i had a lot more in there (before deletingafter i had used it).
https://discussions.apple.com/thread/1906531?threadID=1906531&tstart=0

I have had the same problem and found that if I opend up iPhoto where the videos were placed from, it cleared up the problem. Crazy, huh? Plus, you have to make sure that the iPhoto account is opened to the correct one...this is done by Option Clicking on iPhoto and choosing which account you have the active videos in.

Project won't load into timeline

When I click on a specific project to open in the timeline the arrow icon showing the "film reel" (in the bottom left corner) switches directions like it's loading it into the timeline, but I still see everything in my project library. FCPX behaves like I'm seeing the timeline, but I'm not. I'm in the middle of editing a documentary and this is really bad timing for the software to give me serious issues like this.
I trashed preferences using "Preference Manager" and restarted, but it's not fixing the issue. This happened once before a couple of months ago and that trick fixed it, but it's not working this time.
Please help!
I'm using FCPX v10.0.8 on a MacBookPro 2.7 Ghz Intel Core i7 with 16GB of RAM. My media is on a Pegasus RAID connected via Thunderbolt.

This happened again! It has to be a bug, and it's a debiltating bug. FCPX loads your chosen project into the timeline, but the project library does not move out of the way. The software thinks it's moved out of the way and behaves like you are viewing the timeline, but you can't see any clips.
I trashed prefs, emptied the trash, shut down the computer, started up, launched FCPX, didn't open any other apps. One project loaded into the timeline (a shorter, less complex one), and then when I went to the one I need to work on....boom! It's broken again.
I worked almost all day today and it was fine, but now it got into this mode again. I had to quit and restart the program because other things were starting to get buggy (zoom viewer adjustment wasn't working correctly and the graphics on the audio weren't redrawing properly).
I'm quite frustrated.

Project won't load after upgrade to 10.1.3

Howdy,
I'm working on a series of videos, each in a separate project, but all in the same library.
I did the bulk of the editing in 10.1, but recently upgraded to 10.1.3. FCPX did it's usual "update projects and events" routine when I opened the library in 10.1.3 for the first time. All my projects appear to be fine, except one...
This project is about 30 minutes long, with a handful of different clips – nothing huge... but it won't load. I get the spinning beach ball for a few minutes, then a system alert saying I've run out of application memory. I check Activity Monitor, and sure enough, FCPX is using over 12GB of RAM! It seems FCPX gets stuck in some sort of loop while trying to load this project, and I'm not sure what to do about it... Any help would be appreciated.
System info:
iMac
OSX 10.9.5
3.5GHz Core i7
16GB RAM

OK, I think I resolved my issue. I hadn't noticed that there was one missing media file in the project that wouldn't open. I didn't notice because normally, FCPX would open the project and swap a "missing media" icon for the absent file in the timeline, but in this case it simply refused to open the project. I re-imported the missing file, and now there are two of them in my media browser. If I delete any one of them, they both disappear... Odd.
In any case, my project opens now and that's good. What I don't understand is what happened to that missing file in the first place. I didn't delete it or move it. It seems to have been kicked out of the FCPX database upon upgrade to version 10.1.3, which by itself is a little troubling... and I fear there may still be similar database issues that I haven't discovered yet lurking in other projects
Here's hoping all of FCPX's "growing pains" get resolved soon.
Thanks for your help, Russ.

Please help, CS3 won't run with 10.5.2! Please!

Installed 10.5.2 on my g5 dual 2.5 w 4.5 gigs ram (NOT) intel. Now my AE projects won't run. One started to and then quit. This is major for me. Involves dozens of projects. Please help.

Yes, my powerbook is also trouble-free.
But it's just too slow to run AE on.
And yes, yes, I did repair permissions. I did everything including a "safe" starup, repair permissions many many times, etc. etc. etc.
I'm beginning to think the problem with AE was with non-ae plugins. But then why did automator and software update cease to work?????

Please help. my ical wont load after upgrading to ios 10.7.5

yesterday I upgraded to ios 10.7.5 and now my ical won't load. i press the ical button, it appears in the dock, the white dot next to it flashes for about 3 seconds and then the ical icon disappears without ever loading. Please help.

yesterday I upgraded to ios 10.7.5 and now my ical won't load. i press the ical button, it appears in the dock, the white dot next to it flashes for about 3 seconds and then the ical icon disappears without ever loading. Please help.

Help! Won't load past white screen!!

I need help please! My curve won't load past the white loading blackberry screen. I downloaded an app from the app store and it crashed my phone. I called my carriers tech support but they are backed up and it might be a days before they can get back to me.

Jenn, If your BlackBerry stays powered off with a white or black screen, follow the instructions below. The only indication of life might be the blinking red LED light in the top corner. Nothing seems to wake it up and Desktop Manager doesn't recognize any device is connected.
1) Make sure you have Blackberry Desktop Manager installed.
http://na.blackberry.com/eng/services/desktop/
2) On your PC, go to Start > Run and copy and paste the following line exactly (meaning with the quotation marks):
"c:\program files\common files\research in motion\apploader\loader.exe" /nojvm
3) The Application Loader Wizard will appear -- click "Next."
4) In the "Connection:" drop-down menu, you should see "USB-PIN: UNKNOWN". Click the "Next" button.
5) You should then see a list of applications ready to be installed for your Blackberry. Hit Next and Finish and you are well on your way to getting your Blackberry back to life. Just don't disconnect anything and let the lengthy process finish completely.
NOTE: If you do not see a list of applications mentioned in step 5 and instead see the message "The Blackberry Desktop Software does not have Blackberry Device Software for the device that you have connected to the computer. Contact your wireless service provider or system administrator," then you must download Blackberry's Operating System for your carrier and device.
http://www.blackberryfaq.com/index.php/BlackBerry_Operating_System_Downloads
Just select the appropriate carrier and network type, select your Blackberry model from the list and download the latest version. Install this download and follow the above steps again and you should be on the right path.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

My project won't load!

Hi everyone.
Hey, i'm still using premiere pro cs3 to finish up one project that I started a long time ago.
I was just about to put the finishing touches on an export. I started loading my project, but I refuses to load. It gives me the following error:
[/Buffy/pro/3.0/MediaCore/ASL/Foundation/Make/Mac/../../Src/Mac/MacFile.cpp-943]
Can somone please help me know what is going on, and possibly how to fix this error?
(by the way, i've tried all my auto-save files, and they do the same thing...)
Thanks!

I had a small role in the overhaul of the relink feature set that we did in CC7.0, but I'm not familiar with exactly how the relinking logic worked in CS3.
I would rename the parent folder above all the content in your project, and copy the prproj file to an new folder, say on you desktop. Then try opening that copy of the project. Keep in mind that these measures are simply for purposes of seeing if you can open the project when the assets used in it are out of the equation. That is, it's diagnostic, not remedial.
What version of OSX are you on? If you've recently updated to 10.9, then you might be running into a problem that a few customers have reported where the OS changed the permissions on the AppSettings or Preferences. They didn't get the error message you report, but that could have changed in the intervening 4 versions. Again, I'm not sure where the prefs are in CS3, but I'd start looking at these two paths:
/Users/<USERNAME>/Library/Application Support/Adobe/Premiere Pro/3.0
/Users/<USERNAME>/Library/Preferences/Adobe/Premiere Pro/3.0
Some users have resolved this by creating a new user profile; others have corrected the permissions on the files or folders that got locked.

Please help - AppleWorks won't open. The icon just bounces in the Dock.

I have been writing and saving all day on Appleworks. Now when I want to open up an Appleworks file, it won't open up. I tried clicking it from an icon on my desktop, clicking a file from my Recent Items list, and getting one from my hard drive. Nothing opens up. I tried turning off my computer and restarting it and it still will not open any Appleworks file. The Appleworks icon at the bottom bar of my computer just bounces up and down, but nothing opens up. I am able to open my iWorks Pages files without any problem. The bad thing is that I need to get my saved Appleworks files and edit them. Please help... Thanks in advance, Teachermom99

Welcome to Apple Discussions
When an application stops working as it should, it's likely due to corrupt preferences. You can follow the steps in this user tip or use the reset function of Dale Gillard's Sidekick.

Please help - iMessage won't work

So I updated my phone today like I'm sure a lot of you did and I tried going in to activate my iMessage, I've tried it for hours and even reset my phone and it won't work. I know my id and password are right and my connection to my wifi is good but every time I do it it pops up after about 30 seconds of trying and says "could not sign in. Please check your network connection and try again"
Someone please help ... What do I do? My date & time thing is already set to on as I previously read.

If you are having trouble with SMS messages, then you would need to address that with your carrier, unless you are receiving them and just not get a notification. If you have followed the steps I gave you for iMessage and you are not receiving notifications, then check the settings for Notification Center. If you have Messages set to show on the lock screen and play a sound, and display a banner, etc. then your next step is a restore. First restore from a backup, and if that doesn't work, then restore as a new device. Restoring the phone will result in the loss of all data. Make sure you have backed up the phone, synced all content and imported photos to the computer.

PLEASE HELP:not able to load a simple servlet

Hi,
I'm new to weblogic server.I'm trying to setup weblogic 510.Everything was
going fine until I got stuck to this small thing.I'm not able to load a
simple servlet!.
I would appreciate any pointers regarding this.Please Help me!!!
Here is what I tried:
I have installed weblogic510 plug-in for IIS.I could successfully run jsp
files.However I am not able to load simple servlets;It gave an exception
"java.lang.IllegalAccessError: try to access class
weblogic/utils/classloaders/FileSource from class
weblogic/servlet/internal/WarClassFinder"
Details of my configuration:
WebServer - IIS 4.0
IIS port=80
Weblogic port=7001
I had set it in such a way that all the requests first go to IIS and then
IIS redirects them to Weblogic.I've followed the steps according to the
document "Installing the Weblogic ISAPI Plug-in".
I've registered the servlet in weblogic.properties as following:
weblogic.httpd.register.hello=examples.servlets.HelloWorld2
I tested the servlet by URL http://localhost:7001/hello
Following is the eact text for the exception I got in the WeblogicServer
window:
Mon Jul 24 12:13:13 PDT 2000:<E> <ServletContext-General> Error loading
servlet:
examples.servlets.HelloWorld2
java.lang.IllegalAccessError: try to access class
weblogic/utils/classloaders/Fi
leSource from class weblogic/servlet/internal/WarClassFinder
at
weblogic.servlet.internal.WarClassFinder.getSource(WarClassFinder.jav
a, Compiled Code)
at
weblogic.servlet.internal.WarClassFinder.getClassSource(WarClassFinde
r.java:110)
at
weblogic.utils.classloaders.GenericClassLoader.findLocalClass(Generic
ClassLoader.java:381)
at
weblogic.utils.classloaders.GenericClassLoader.reallyLoadClass(Generi
cClassLoader.java, Compiled Code)
at
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader$Slave.
loadClass(RecursiveReloadOnModifyClassLoader.java:234)
at
weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClass
Loader.java:146)
at
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader.findLo
calClass(RecursiveReloadOnModifyClassLoader.java:109)
at
weblogic.utils.classloaders.GenericClassLoader.reallyLoadClass(Generi
cClassLoader.java, Compiled Code)
at
weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClass
Loader.java:172)
at
weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClass
Loader.java:146)
at
weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubI
mpl.java:291)
at
weblogic.servlet.internal.ServletStubImpl.getServlet(ServletStubImpl.
java:164)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:99)
at
weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletCon
textImpl.java:742)
at
weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletCon
textImpl.java:686)
at
weblogic.servlet.internal.ServletContextManager.invokeServlet(Servlet
ContextManager.java:247)
at
weblogic.socket.MuxableSocketHTTP.invokeServlet(MuxableSocketHTTP.jav
a:361)
at
weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java:261)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled
Code)
Mon Jul 24 12:13:13 PDT 2000:<E> <ServletContext-General> Servlet failed
with Ex
ception
I dont think there were any problems in the classpath or
servletpath;Basically WeblogicServer was able to locate the servlet but when
it tried to load the servlet it gave this exception.
I would appreciate any ideas/suggestions.
Thanks,
Sravan

Nice to hear it works!
However, one mistake you have in the configuration you provided:
You put D:\weblogic\BDL\servletclasses in both CLASSPATH and
weblogic.class.path, remove it from CLASSPATH.
Cheers - Wei
Sravan Thella <[email protected]> wrote in message
news:[email protected]...
Hi Michael and Wei,
Thank you very much for the response.
My servlet details:
Name - HelloWorld2.class
package - examples.servlets
Location - d:\weblogic\BDL\servletclasses ---- here BDL is my new folder
where I want to keep my servlets
My CLASSPATH(environment) settings:
D:\weblogic\BDL\servletclasses;d:\weblogic\classes\boot;d:\weblogic\eval\clo
>
udscape\lib\cloudscape.jar;d:\weblogic\lib\poolorb.jar;D:\java\jre\lib\rt.ja
r;
my weblogic classpath settings(set it thru wlconfig)
D:\weblogic\BDL\servletclasses;d:\weblogic\classes\boot;d:\weblogic\eval\clo
>
udscape\lib\cloudscape.jar;d:\weblogic\lib\poolorb.jar;D:\java\jre\lib\rt.ja
r;
My weblogic.policy:
grant codeBase "file:d:/weblogic/-" {
permission java.io.FilePermission "d:${/}weblogic${/}-",
"read,write,delete,execute";
permission java.net.SocketPermission "localhost:1-9000",
"connect,accept,listen,resolve";
permission java.awt.AWTPermission "accessClipboard";
permission java.awt.AWTPermission "accessEventQueue";
permission java.awt.AWTPermission "showWindowWithoutWarningBanner";
permission java.io.SerializablePermission"enableSubclassImplementation";
permission java.io.SerializablePermission "enableSubstitution";
permission java.lang.RuntimePermission "accessClassInPackage.*";
permission java.lang.RuntimePermission "accessDeclaredMembers.*";
permission java.lang.RuntimePermission "createClassLoader";
permission java.lang.RuntimePermission "createSecurityManager";
permission java.lang.RuntimePermission "defineClassInPackage.*";
permission java.lang.RuntimePermission "exitVM";
permission java.lang.RuntimePermission "getClassLoader";
permission java.lang.RuntimePermission "createClassLoader";
permission java.lang.RuntimePermission "getProtectionDomain";
permission java.lang.RuntimePermission "loadLibrary.*";
permission java.lang.RuntimePermission "modifyThread";
permission java.lang.RuntimePermission "modifyThreadGroup";
permission java.lang.RuntimePermission "readFileDescriptor";
permission java.lang.RuntimePermission "setContextClassLoader";
permission java.lang.RuntimePermission "setFactory";
permission java.lang.RuntimePermission "setIO";
permission java.lang.RuntimePermission "setProtectionDomain";
permission java.lang.RuntimePermission "setSecurityManager";
permission java.lang.RuntimePermission "writeFileDescriptor";
permission java.lang.reflect.ReflectPermission "suppressAccessChecks";
permission java.net.NetPermission "requestPasswordAuthentication";
permission java.net.NetPermission "setDefaultAuthenticator";
permission java.security.SecurityPermission "getPolicy";
permission java.security.SecurityPermission "setPolicy";
permission java.util.PropertyPermission "*", "read,write";
grant codeBase "file:d:/weblogic/BDL/servletclasses/-" {
permission java.io.FilePermission
"d:${/}weblogic${/}BDL{/}servletclasses{/}-", "read,write,delete,execute";
permission java.net.SocketPermission "localhost:1-9000",
"connect,accept,listen,resolve";
permission java.awt.AWTPermission "accessClipboard";
permission java.awt.AWTPermission "accessEventQueue";
permission java.awt.AWTPermission "showWindowWithoutWarningBanner";
permission java.io.SerializablePermission"enableSubclassImplementation";
permission java.io.SerializablePermission "enableSubstitution";
permission java.lang.RuntimePermission "accessClassInPackage.*";
permission java.lang.RuntimePermission "accessDeclaredMembers.*";
permission java.lang.RuntimePermission "createClassLoader";
permission java.lang.RuntimePermission "createSecurityManager";
permission java.lang.RuntimePermission "defineClassInPackage.*";
permission java.lang.RuntimePermission "exitVM";
permission java.lang.RuntimePermission "getClassLoader";
permission java.lang.RuntimePermission "createClassLoader";
permission java.lang.RuntimePermission "getProtectionDomain";
permission java.lang.RuntimePermission "loadLibrary.*";
permission java.lang.RuntimePermission "modifyThread";
permission java.lang.RuntimePermission "modifyThreadGroup";
permission java.lang.RuntimePermission "readFileDescriptor";
permission java.lang.RuntimePermission "setContextClassLoader";
permission java.lang.RuntimePermission "setFactory";
permission java.lang.RuntimePermission "setIO";
permission java.lang.RuntimePermission "setProtectionDomain";
permission java.lang.RuntimePermission "setSecurityManager";
permission java.lang.RuntimePermission "writeFileDescriptor";
permission java.lang.reflect.ReflectPermission "suppressAccessChecks";
permission java.net.NetPermission "requestPasswordAuthentication";
permission java.net.NetPermission "setDefaultAuthenticator";
permission java.security.SecurityPermission "getPolicy";
permission java.security.SecurityPermission "setPolicy";
permission java.util.PropertyPermission "*", "read,write";
I dont know what is wrong here. In the weblogic.policy file,I tried
differrent combinations but it never worked.
I find weblogic documentation for troubleshooting to be pathetic.Notuseful
at all.Documentation looks
good to read ;not for practical purposes.I'm not sure whether others have
similar opinion.
I'm stuck at this thing for the past few days,I still have lot of work todo
to purusue our management team to buy weblogic
but I'm still stuck at this thing.
Thank you very much for your time.
Thanks,
Sravan
"Sravan Thella" <[email protected]> wrote in message
news:[email protected]...
Hi,
I'm new to weblogic server.I'm trying to setup weblogic 510.Everything
was
going fine until I got stuck to this small thing.I'm not able to load a
simple servlet!.
I would appreciate any pointers regarding this.Please Help me!!!
Here is what I tried:
I have installed weblogic510 plug-in for IIS.I could successfully runjsp
files.However I am not able to load simple servlets;It gave an exception
"java.lang.IllegalAccessError: try to access class
weblogic/utils/classloaders/FileSource from class
weblogic/servlet/internal/WarClassFinder"
Details of my configuration:
WebServer - IIS 4.0
IIS port=80
Weblogic port=7001
I had set it in such a way that all the requests first go to IIS andthen
IIS redirects them to Weblogic.I've followed the steps according to the
document "Installing the Weblogic ISAPI Plug-in".
I've registered the servlet in weblogic.properties as following:
weblogic.httpd.register.hello=examples.servlets.HelloWorld2
I tested the servlet by URL http://localhost:7001/hello
Following is the eact text for the exception I got in the WeblogicServer
window:
Mon Jul 24 12:13:13 PDT 2000:<E> <ServletContext-General> Error loading
servlet:
examples.servlets.HelloWorld2
java.lang.IllegalAccessError: try to access class
weblogic/utils/classloaders/Fi
leSource from class weblogic/servlet/internal/WarClassFinder
at
weblogic.servlet.internal.WarClassFinder.getSource(WarClassFinder.jav
a, Compiled Code)
at
weblogic.servlet.internal.WarClassFinder.getClassSource(WarClassFinde
r.java:110)
at
weblogic.utils.classloaders.GenericClassLoader.findLocalClass(Generic
ClassLoader.java:381)
at
weblogic.utils.classloaders.GenericClassLoader.reallyLoadClass(Generi
cClassLoader.java, Compiled Code)
at
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader$Slave.
loadClass(RecursiveReloadOnModifyClassLoader.java:234)
at
weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClass
Loader.java:146)
at
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader.findLo
calClass(RecursiveReloadOnModifyClassLoader.java:109)
at
weblogic.utils.classloaders.GenericClassLoader.reallyLoadClass(Generi
cClassLoader.java, Compiled Code)
at
weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClass
Loader.java:172)
at
weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClass
Loader.java:146)
at
weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubI
mpl.java:291)
at
weblogic.servlet.internal.ServletStubImpl.getServlet(ServletStubImpl.
java:164)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:99)
at
weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletCon
textImpl.java:742)
at
weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletCon
textImpl.java:686)
at
weblogic.servlet.internal.ServletContextManager.invokeServlet(Servlet
ContextManager.java:247)
at
weblogic.socket.MuxableSocketHTTP.invokeServlet(MuxableSocketHTTP.jav
a:361)
at
weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java:261)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java,Compiled
Code)
Mon Jul 24 12:13:13 PDT 2000:<E> <ServletContext-General> Servlet failed
with Ex
ception
I dont think there were any problems in the classpath or
servletpath;Basically WeblogicServer was able to locate the servlet butwhen
it tried to load the servlet it gave this exception.
I would appreciate any ideas/suggestions.
Thanks,
Sravan

Help system won't load

Lately, I haven't been able to access the Mac OS X system help. I'm running 10.3.9 (just reinstalled and re-updated, etc.) and when I try to run Help, it starts to come up and then just goes away.... won't load.
Ideas, suggestions welcome.
Thanks, Daniel

This is a common bug in Panther. The solution to this problem is simple though:
• (~ means your home directory)
Go to ~/Library/Preferences and delete the following files......
com.apple.help.plist
com.apple.helpui.plist (you may or may not have this one).
com.apple.helpviewer.plist
Next go to ~/Library/Caches and delete the folder......
com.apple.helpui
Log out and log in. If the problem is gone, empty the trash. If not, put everything back.
bigbiker

Old iDVD projects won't load correctly!

Hi,
A few years ago I bought a Titanium Powerbook and made many iDVD projects with it in iDVD 4 and iDVD 5. I recently migrated all my stuff over to my new Intel Mac. I tried opening my old projects in iDVD 6, but it says it doesn't have the theme I used (Sky), so it reverts to the 'Travel' theme and all the fonts and placement of menus is screwed up. Can someone please help me? I've spent countless hours on all of these old projects and would like to retrieve them on my new Mac. I almost always used 'Sky' because it was a simple theme where I could just drop all of menu screens I created in Photoshop. Re-creating each menu all over again would be unbearable!
Thanks!

SKY is one of the very old themes that dates before iDVD 3.
As you have found out, it is not included in the iDVD versions that come with new machines.
Do you still have your Ti book?
Apple has changed the location of the iDVD themes - in iDVD 4 and earlier, the themes are in the application package. That changed - I think in iDVD5 and they are in another location in the Library.
If you still have your old machine, there is a very slight chance you might be able to use the extracted Sky theme in newer versions.
Otherwise, you need to bite the bullet and redesign your projects. Green linen is fairly plane and you might be able to use it as a basis for your redesigned themes.

Help CS6 won't load?????

Hi I'm trying to run CS6 on a Mac Book Pro all has worked fine until recently, now it won't load! I have tried reinstalling but get the following error messages DW063 and DW050 help.

Things to try.
Create a small blank animation and move an object, then export that out to try importing the test file.
Reset the preferences by holding down the modifier keys while photoshop starts.
Reset the tools, found in the top toolbar at far left side.
Uninstall then reinstall photoshop.

Please help, project won't load

Similar Messages

Maybe you are looking for