Please help: Quick Reply recipients for a group text

Hello! Thank you for your response.
For the Quick Reply feature when texts are set to "alert", it seems to always show who sent the most recent text. If this person sent a message to both you and a third person, is there a way to set the Quick Reply feature to show both names that you are responding to?
Or, to verify if I am responding to a single person or a group text, must I always choose "Close" and then open Messages?
Thanks again!

jGuru has an excellent tutorial called Effective Layout Management which tackles exactly the questions you are asking. Read it at http://java.sun.com/developer/onlineTraining/GUI/AWTLayoutMgr/index.html
Regards,
Brian

Similar Messages

Urgent please help...looking for a scrolling text and ...

Friends I am really short of time and I have to develop this thing where a data is shown in a scrolling box.Each paragraph inside the box is a link and click on the paragraph opens that link.I want something e like in the website http://www.delisys.com and see the scrolling box in the middle and click on one of the paragraph and u will see what I mean.Please if any of you guys have a HTML code for that then please post it here.
Please it will be very helpful
Thanks
MS

Go to yahoo and do a search on "Java & scroller" or "Applet & scroller" and you'll find a whole bunch.
Here is one link;
http://www.softricks.com/java/Scrollers/vScroller.html
or if you want the one on the delisys site (personally I think they went overboard with the thing)
http://www.microticker.com/

Please help to find docs for Generation-4 Hardware

Hello
Please help to find docs for Generation-4 Hardware
• Cisco MDS 9000 48-Port 8-Gbps Advanced Fibre Channel module (DS-X9248-256K9)
• Cisco MDS 9000 32-Port 8-Gbps Advanced Fibre Channel module (DS-X9232-256K9)
• Cisco MDS 9513 Fabric 3 module, DS-13SLT-FAB3 (Generation-4 module)
Thanks
Chetan.R

Hello Chetan,
Here's a link to the Gen 4 migration guide:
http://www.cisco.com/en/US/docs/switches/datacenter/mds9000/hw/9500series/installation/5.2/installmigratefab3.html#wp1435702
I do hope that guide answers the questions you have.
Regards,
Ken

Please help, has been blocked for your account temporarily

Please help, has been blocked for your account temporarily

Hey @kat54 ,
Welcome to the HP Forums!
I understand you're receiving an error stating "This program has been blocked for your protection."
You can read about this error here: "Blocked", "User Account Control", "Not trusted", or "Return code: 1625" message in Windows.
You will find a link for Printers here which directs you to the HP Update Software Utility to resolve the problem. When you install this utility ensure you select version 5.005.002.002 or later.
Make sure the utility you've downloaded is for your exact product and operating system.
If this does not resolve the issue please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the following link to get the support number for your region: Phone Assist Worldwide.
Thanks!
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

Building a "Quick Reply" plugin for Mac Mail???

Anyone know where I can find someone to develop a plugin for Mountain Lion Mail that replicates the "Quick Reply" feature from Sparrow mail? (ref: http://michaelwender.com/blog/2012/07/18/sparrow-mail-app-quick-reply-is-my-favo rite-feature/)
Anyone even know if it's feasible/possible? Not sure why Apple isn't all over this one, but it probably violates some usability Zen law or something. I happen to really like it. Anything that makes me FASTER on email is good.

I couldn't agree more, with everything you said. Sparrow has been bought by Google and development ceased. www.fluent.io looked even better, but they've just shut down. I think even Microsoft at www.Outlook.com have the same thing.
We really need this Quick Reply functionality for Apple Mail. And integration of Facebook into the same 'news feed' style presentation of emails. It's the way ahead. Apple need to be all over this.

Dear Apple,please help me.the glitch and lags on games made me sad beause i am too love with my 4s. Why iOS 7 really made me sad...please help me.im beg for you.

Dear Apple,please help me.the glitch and lags on games made me sad beause i am too love with my 4s. Why iOS 7 really made me sad...please help me.im beg for you.

www.apple.com/feedback/iphone.html
No one from Apple is listening on these forums.

How can I hide the recipients of a group text message?

How can I hide the recipients of a group text message?

This is Illustrator, no matter which version you are using.
It doesn't work like in other programmes and Illustrator's behaviour is often undesired.
There is no good trick that I'm aware of to mimic Draw's or Freehand's way to do it.

Please help with assigning user to a group in AD using dbms_ldap

Dear gurus of Apex and LDAP!
Please help me a bit.
I managed to create any user in AD from Apex using dbms_ldap package and set many of his attributes. But I cannot set that my user belongs to specific group, let's say MY_GROUP. I guess the name of attribute for group is 'member' or 'memberOf', so I tried them both in the same way as I've done for other attributes:
v_vals(1) := 'MY_GROUP';
DBMS_LDAP.populate_mod_array(v_array, DBMS_LDAP.MOD_ADD, 'member', v_vals);
I've got LDAP client/server error: CONSTRAINT violation. 000020B5: AtrErr: DSID-031516FC, #1: 0: 000020B5:
DSID-031516FC, problem 1005 (CONSTRAINT_ATT_TYPE), DATA 0, Att 1f (MEMBER)
v_vals(1) := 'MY_GROUP';
DBMS_LDAP.populate_mod_array(v_array, DBMS_LDAP.MOD_ADD, 'memberOf', v_vals);
I've got LDAP client/server error: DSA IS unwilling TO perform. 0000209A: SvcErr: DSID-031A0929, problem 5003 (WILL_NOT_PERFORM), DATA 0
After that I've tried to extend group name to string, which is shown in LDAP browser for attribute 'memberOf' (when I've added it manualy):
v_vals(1) := 'CN=MY_GROUP,OU=GROUPS,OU=Allianz,DC=allianz,DC=com';
DBMS_LDAP.populate_mod_array(v_array, DBMS_LDAP.MOD_ADD, 'member', v_vals);
I've got LDAP client/server error: OBJECT CLASS violation. 0000207D: UpdErr: DSID-03150913, problem 6002 (OBJ_CLASS_VIOLATION), DATA 0
v_vals(1) := 'CN=MY_GROUP,OU=GROUPS,OU=Allianz,DC=allianz,DC=com';
DBMS_LDAP.populate_mod_array(v_array, DBMS_LDAP.MOD_ADD, 'memberOf', v_vals);
LDAP client/server error: DSA IS unwilling TO perform. 0000209A: SvcErr: DSID-031A0929, problem 5003 (WILL_NOT_PERFORM), DATA 0
I've also tried some other variants (without 'CN=' and without 'OU=GROUPS,OU=Allianz'), but still no success.
Search of this forum and even google didn't help either :(
Please, help me to find the correct syntax for it or tell me if it's not possible.
Thanx in advance,
Vladimir

Vladimir ,
firstly the attributes member and memberOf are special attributes in AD having a set of predefined values. Hence an error will be thrown if you try to assign them values like 'MY_GROUP'. There are two basic solutions to this problem : Either you define an OU in your AD which will act as your 'MY_GROUP'. This is a quick fix solution and is not robust at all. The other solution is to add your own property in the tree , something like 'roleCode', you can then assign it any value you want.
But the problem now is, AD does not allow addition of new attributes in the structure. You have to use ADAM in for this and you can specify a common linking mechanism between AD and ADAM now such as email address can act as the link between both the directories.
Hope this helps
Shantanu

Need help quickly as possible for the error 0xc004c008

hi,i have lenovo ideapad z580 laptop with windows 8 pre-installed still within the warranty period but after doing one key recovery for the second time an activation error appear as following "the product key is already being used on another pc,try
a different key or buy new one" with the following error code "0xc004c008" and i have contacted lenovo they gave me new product key but also the problem still exist and also one of my friends have a look at the laptop and told me that to go
to lenovo and have a new windows 8 installed on the laptop but i am really confused and don't know what should i do? . So,please i am really need help quickly and thanks in advance

Well, there's enough time, so if you start the ball rolling with your code then people will help - but you have to do the work. We won't do your homework...

I tryed to update my iphone, now its saying i have to connect with itunes but when i plug it into a computer the only option is to restore it, i would lose all my things please help quick.

so recently i wanted to load my friends music onto my phone because my laptop broke and i had no other way to get my music. i loged out of my itunes so the music could load without any problems. i tryed to so an update on the softwear today and my phone says i need to conncect to itunes, but when i try the only option is to restore it! that would mean all my things on my phone GONE. please help i cant live without a phone for long but i dont want to have to restore it. pleaseee please tell me somone can help.

The problem is your friend's music does not belong to you. It is owned by your friend.
I'm afraid you cannot do what you are trying to do. Restoring the iPhone is what you would have to do.
In the future, put your music on the computer and transfer it to the iPhone, not the other way.

PLEASE HELP! SLOW SPEED FOR 5 WEEKS!

Hey all, i've come here as a last resort as im sick of my slow infinity speed and sick to death with bt customer service which does not exist!
Since before christmas my bt infinity package 1 38down/10up has been playing up after 12 midnight! usually after this time my speed would go down from 37download to around 0.5/0.1 soo low that i can't load a web page. Ive tried for weeks contacting bt which takes me to the offshore call centre where iv'e been fobbed of that an engineer is investigating an issue at the exchange or that the issue will be fixed in either 24, 36 or 48 hours numerous times to which it has not.
This last week my internet speed has dropped during the day time where before in the day it was a solid 37down and 10 up it now goes down to 10 meg and now its gone down to 0.1 meg. It went down to 0.1 meg today at around 6.30pm.
These are a list of stats below: Im at my wits end and i just want my broadband fixed! I beg Please someone help me!
1. Product name:
BT Home Hub
2. Serial number:
+068543+NQ41012931
3. Firmware version:
Software version 4.7.5.1.83.8.204 (Type A) Last updated 15/01/15
4. Board version:
BT Hub 5A
5. DSL uptime:
0 days, 00:07:34
6. Data rate:
9999 / 39993
7. Maximum data rate:
36556 / 97131
8. Noise margin:
30.5 / 22.7
9. Line attenuation:
13.5 / 12.8
10. Signal attenuation:
13.7 / 12.8
11. Data sent/received:
0.2 MB / 0.1 MB
12. Broadband username:
[email protected]
13. BT Wi-fi:
Yes
14. 2.4 GHz Wireless network/SSID:
BTHub5-QTSG
15. 2.4 GHz Wireless connections:
Enabled (802.11 b/g/n (up to 144 Mb/s))
16. 2.4 GHz Wireless security:
WPA2
17. 2.4 GHz Wireless channel:
Automatic (Smart Wireless)
18. 5 GHz Wireless network/SSID:
BTHub5-QTSG
19. 5 GHz Wireless connections:
Enabled (802.11 a/n/ac (up to 1300 Mb/s))
20. 5 GHz Wireless security:
WPA2
21. 5 GHz Wireless channel:
Automatic (Smart Wireless)
22. Firewall:
Default
23. MAC Address:
34:8a:ae:bb:d4:80
24. Modulation:
G.993.2 Annex B
25. Software variant:
AA
26. Boot loader:
1.0.0

Can someone please help me too! before christmas i was getting low speeds after 12 midnight, going down to 0.1 meg for over 5 weeks now ive had this problem and now in the day where i used to get a solid 37meg down im now at different times, started today at 6.30pm im going down to 0.1 meg.
BT Customer service is disgusting beyone belief, been fobbed of after 12 phone calls. Please someone help.
stats avalibe here:
1. Product name:
BT Home Hub
2. Serial number:
+068543+NQ41012931
3. Firmware version:
Software version 4.7.5.1.83.8.204 (Type A) Last updated 15/01/15
4. Board version:
BT Hub 5A
5. DSL uptime:
0 days, 00:45:18
6. Data rate:
9999 / 39993
7. Maximum data rate:
36556 / 97131
8. Noise margin:
30.5 / 22.7
9. Line attenuation:
13.5 / 12.8
10. Signal attenuation:
13.7 / 12.8
11. Data sent/received:
0.2 MB / 0.1 MB
12. Broadband username:
[email protected]
13. BT Wi-fi:
Yes
14. 2.4 GHz Wireless network/SSID:
BTHub5-QTSG
15. 2.4 GHz Wireless connections:
Enabled (802.11 b/g/n (up to 144 Mb/s))
16. 2.4 GHz Wireless security:
WPA2
17. 2.4 GHz Wireless channel:
Automatic (Smart Wireless)
18. 5 GHz Wireless network/SSID:
BTHub5-QTSG
19. 5 GHz Wireless connections:
Enabled (802.11 a/n/ac (up to 1300 Mb/s))
20. 5 GHz Wireless security:
WPA2
21. 5 GHz Wireless channel:
Automatic (Smart Wireless)
22. Firewall:
Default
23. MAC Address:
34:8a:ae:bb:d4:80
24. Modulation:
G.993.2 Annex B
25. Software variant:
AA
26. Boot loader:
1.0.0

URGENT PLEASE HELP-Session State Provider for 8i.

We are looking for a SESSION STATE PROVIDER for .NET 2.0 for Oracle 8i. Please help to find a solution. The current installation on the Oracle website does not work for 8i.
Thanks a BILLION in advance.

You'll need to install the ODP 11 beta...

Error -50 when opening itunes....PLEASE HELP - been this way for 2 months

Hi Everyone...I have had this issue for 2 months now and even when I have been talking to apple support team they are unable to fix the problem.
When I try to open my itunes i get the error message -50...I am running the 64 version of the itunes when its working, with my operating system of Windows 7...Apple technical support thought that it might be my anti-virus program - which is systems mechanic pro (an all in one program for cleaning out my computer)
I have tried un-installing and then re-installing, over and over again. I have also tired deleting file and installing older versions and I again get the same error. If anyone has any ideas or solutions that would be greatly appreciated as I have been without my itunes for 2 months - and I'm sure you all can understand that your not able to do anything without this program...PLEASE HELP

I resolved an issue of this description just 2 nights ago. I am guessing the error number is a 'General' error number not a specific one, becasue from reading I see many reasons or fixes for the same error code and as in my case possibly a different underlying causes.
My (it was my wifes iTunes ) that would not open on her work provisioned laptop. Being a server admin I am the luccky one at home that get to fix it.
The System side scenario of my (-50) is this:-
1. Work provide (Windows Vista ) laptop.
2. Work distribute Software to laptop via networked Windows Distribution services.
3. My wife uses Quicktime to listen to medical audio off the net that requires Quicktime.
4. Quicktime installed from said Windows distribution services All works no problem.
5. Son visits us from USA with an iPad.
6. Wife buy's an ipad the week released in Australia.
7. I install Itunes to her laptop so we can 'register iPad'and she can manage her Apps, Doc's and Tunes.
8. All works good.
9. iTunes 10 is released and updates her iTunes.
10. I get called (not sure if same day tho) Help me I don't want to loose or reset my IPad to fix this.
11. I as she had tried several uninstalls and reinstalls of iTunes.
12 No change.... still (-50) on loading iTunes.
13. I call Apple Support (after all we pay for the additional support pack).
14. Apple check a number of services such as 'MobileDeviceHelper' is loaded and they appear to be.
15. Apple guide me through an orderly uninstall of ALL Apple Apps that are hooked into iTunes. (order of uninstall is specific to be done properly I will post apps removal orde at bottom of this thread).
16. I get to Quicktime and I note the Windows distribution of Quicktime 7 and additional Quicktime 10 application installed in 'Windows7 Control Panel 'Programs and Features).
17. I as an Admin at my wifes work (no I have nothing to do with the desktop Builds) realise I need to go in to my wifes work and (yes) reinstall the vesion 7 Quicktime from our Application Distribution service then Uninstall it.
18. I do just that Work provisioned Quicktime 7 is uninstalled.
19. I then set about uninstalling the remainder of the Apple applications that are 'connected to iTunes and for good measure two others that are not.
20. All is now gone
21. I reinstall iTunes7
22. 'Voila' it opens now.
I seems to me that the update to Itunes introduced an additional install of Quicktime and messed things up. if software is 'distributed' to the laptop as ours is Updates like Quicktime cannot happen unless distributed by work. Neither can you uninstall work distributed apps unless connected to the work network. (Oh we do have (Local Admin) permissions on the work provided laptop to do what we did) Obviously Work provisioned Quicktime will not go on again..
Oh the Order of uninstalling the Apple apps from a Windows 7 Laptop as provided by the Apple Support Guy is.
1. iTunes
2. Quicktime (where I saw the 2 Quicktime installs)
3. Apple Software Update
4. Apple Mobile Device Support
5. Bonjour
6. Application Support
For good measure I also uninstalled
7. Mobile Me Control Panel
8. Safari
Restarted the Machine and presto it was working again. I did not manually go and delete the Folders left behind if any were after the uninstall. I noted all my wifes stuff Apps, Tunes, Doc's etc came back when iTunes loaded and the iPad was not connected (which I did first). iPad was connected and sync performed normally.
Thankfully the marriage is on an even keel again.
I now have my oWn iPad
and I now am ******* after a MacBook Pro
Rachel at work still says ... Get a Mac
Work still resisting.
May be MazzBritt not uninstalling in the right order. the Apply guy was adamant it needed to be done so.
Hope this helps some one........

PLEASE Help with HTML code for email background image...

Hi there!
i have a background image that I want to pop into an html email widget for the email's background... here is the web link I created in Photoshop: file:///C:/Users/Rachel/Desktop/iMuse%20Clients/LeadMachine360/Email%20Signatures/tileabl e-metal-textures-2.html
If anyone could please help me out that would be AWESOME! I've attached pics of the background & I'm using Infusionsoft email builder which allows for HTML widgets. I have a code that I use for my landing pages & webforms which works, tried that but no dice!
Any help would be much appreciated - I'm an html newbie!
Here is the code that I use for landing pages & works great, tried it for the email & it was a fail:
<style>
#mainContent .background, {
      background: url('file:///C:/Users/Rachel/Desktop/iMuse%20Clients/LeadMachine360/Email%20Signatures/ti leable-metal-textures-2.html') no-repeat center center fixed;
    background-size: cover;
</style>
<script src="file:///C:/Users/Rachel/Desktop/iMuse%20Clients/LeadMachine360/Email%20Signatures/ti leable-metal-textures-2.html">
</script>
<script>
jQuery(document).ready(
      function(){
      jQuery(' table.bodyContainer').removeAttr('bgcolor');
</script>
thanks in advance!
Muse

Not sure what you expect. Your URL is absolute and pointing to a local file resource. It's not a proper relative HTML link. Beyond that it's toatlly unclear how you actually plan to load your image and where they are hosted, so nobody can tell you anything. Either way, there is an obviously painful lack of understanding of even the most basic web techniques, so the best advise anyone would give you is to spend some time with a web search and actualyl learn some of that stuff...
Mylenium

KT4V BOOT Problems please help quick

ok
i just got everything running again, then i replaced the cup heatsync and fan.
now, everything starts up, cd roms spin up, hdd's spin up, but the monitor shows nothing at all the usb mouse does not light up.
please help me figure out whats wrong, i just cleared cmos, with no luck.
ill do it again..
my system,
350W PS
kt4v
2 hdds 20+40 gig
Radeon 9200 overclocked with huge overdone 50$ heatsync + fan thermaltake
Athlon 2100 xp tbred B not overclocked.
1 stick pc2700 ram 256MB
2 STICKS 512 pc 2100

Quote
Originally posted by Archangel4life
nope returned it today for a full refund :(
Good no money lost
[STRIKEOUT]yeah try the GeForce 4 and see what happens?[/STRIKEOUT]
darn

Please help: Quick Reply recipients for a group text

Similar Messages

Maybe you are looking for