Please Help re PIN
I recently changed my mobile to a Blackberry Curve 8520 (through Orange France - all the helpline is in technical French and I struggle with this!).
On returning from the UK I turned my mobile off to prevent texts from Orange waking me up in our cabin. Today I turned my mobile back on and it is demanding a PIN.
I do not recall setting a PIN when I switched SIMS from my old mobile - Is there a factory-set standard PIN that I could enter?
Many Thanks
Is it asking for a PIN or Password?
Some SIM cards are locked and must have a 4-digit PIN entered. It is often the same PIN code used as a 'password' when you call your mobile provider to access your mobile account.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code
Similar Messages
-
Please help. iPod pins are bent.
where my iPod plugs in, the pins are all bent and destroyed and won't charge. I'm very careful with my electronics so I don't know how this could have happened. I'm very upset especially cuz I use my iPod to practice my drums. How do I fix it or charge it some other way? help. :/
Apple will exchange your iPod for a refurbished one for this price:
Apple - Support - iPod - Repair pricing
There are third-party places that will replace the connector for less. Google for them. -
I am facing a strange problem on new iphone 5 that I bought last week. The maps app and the places in photo gallery shows the pin and my location, however there is no information of locations. Tried to close the apps, phone restart, reset etc. I am accessing it via strong wireless connection and it works fine on other devices. Please help.
zapgrap wrote:
there is no information of locations.
Then no information exists. Use the Report a Problem button within the app to report it. -
please help my iphone 4s has gone into the lost mode and i cant re-activate it i dont know what to do. Itunes needs me to put the Simcard pin but i dont have any option for that.
Hello Buzzy78,
Try to put your iPhone in Recovery mode and then Restore it to Factory settings and see if you are able to get into your iPhone.
Recovery Mode : http://support.apple.com/kb/HT1808 -
I have a mac book pro and i have connected my panasonic mini dv video camera via firewire 9 to 4 pin connector but imovie doesnt recognize. please help.
Hello twrate,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iMovie '11: If iMovie doesn’t recognize your camcorder
http://support.apple.com/kb/PH2146
Best of luck,
Mario -
my neices ipod touch was given to a 3 year old and the incorect pin code was entered to many times it now says on the screen ipod disabled try again in 22,653,384 minutes which is like 45 years please help as to what i can do to undo this as we can use this at all i have tryed pushing home button and top swich together but comes up with the same screen thanks guys poppygobble
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
800 vs 400 and 9 pin to 4 pin - please help!!
I have a Sony DCR-HC48 with "base station" and just bought a 9 pin to 4 pin cable from Radio Shack. The Gigaware cable says speed supported up to 400Mbps. I plug the 4 pin end into the base station, and the 9 pin into the Firewire 800 port on the back of the computer. iMovie does not recognize the camera, nor is it recognized in System Profiler.
When I plug my Lacie external hard drive into the same port with a Firewire 800 cable, the drive is listed in the System Profiler under Firewire.
My thought is that the cable I have is the wrong one, even though it seems to fit. I'm assuming I need the same cable except one that supports 800Mbps?
Please help!!!!!If your camera is FW400 and the only port on your computer available is FW800, then you have the correct type of cable, my only suspicion would be that you have a bad cable.
You might also try connecting the camera on it's own (with no other FW devices connected. -
I downloaded FF 4 and now 5 and with neither my screen looks nothing like it shows on the FF page. For instance, I do not have the orange FF tab in the upper left corner, I have no option of "pin as app" nor do I have Panorama. Can someone please help me?
To get the orange FF tab, go to View > Toolbars > Menu Bar. This should uncheck the menu bar and give you the orange button.
Panorama is a box made of 4 grey rectangles that should be on the far right, if it isn't after you enable the orange FF tab, right click on anywhere on a tool bar that doesn't have anything on it, and you should get a menu with a list of your tool bars that you can check and uncheck. go down to customize at the very bottom and it will open a window with all your buttons. Find the panorama/tab groups button and drag it onto the tool bar of your choice.
to pin a tab as an app, right click on it; it's an option in the right-click menu. -
i have like a paper gift card i got with a purchase and it has "gift card number" and "pin" and i want to redeem it but when i go to redeem a gift card on itunes it says "code" i i don't have that! please help i want to redeem this
coIt is a code. See:
iTunes Store: How to redeem a code
Apple - iTunes - Inside iTunes - How to Redeem Free Download Codes and Gift Cards In the App Store and iTunes -
My macbook is blocked by pin code, please help, I dont know what to do!
My macbook is blocked by pin code, please help, I dont know what to do!
When you enter iTunes on the PC and the iPod icon pops up, right click on it and select "Options". Then click on the Music tab. Once you're in the Music tab check the box that says "Enable Disc Use". This means that you've just turned your iPod into a portable hard drive. Click "Ok" and move your iPod from the PC to the Mac. From there, your iPod should show up on the Mac's desktop right under the Hard Drive icon. Click "File" at the top of the screen and select "Add to Library". Find the iPod hard drive in the selection screen and choose the music folder that's on it. Then just click Ok and all your music will be downloaded. That should do the trick, but you might want to do a Google search on the subject to get a second opinion. Best wishes!
-
A few of my ipod touch pins were broeken, but it charged just fine, i had to keep it plugged in all the time though. Two days ago, even though it was plugged in, it died. Ive tried every outlet and cord, but it just wont charge. it turns on, the apple logo comes up, then it dies. it shows the dead battery sign once in a while, but wont charge. i tred plugging it up to my computer last night to charge it, but it still didnt charge. please help me!
my ipod touch its charger wont charge and i wanna know why it wont charge and how to fix it???????????
-
Please help my phone wont let me type in my password and when connected to itunes it wont let me type my password in still
You need to restore the iPhone, not just connect it. If iTunes says that the iPhone needs to be unlocked before it can be restored, put the iPhone into Recovery Mode:
http://support.apple.com/kb/ht1808
and then restore it.
Regards. -
Please help me
"Only Apple retail stores or Apple Authorized Service Providers can unlock computers protected by a firmware password, such as passwords set with Find My Mac."
http://support.apple.com/kb/TS4006 -
Satellite m300 won't boot! please help!
Hi,
I've got a bit of an issue here.. I have a Satellite m300.. a white one..
and it won't boot... I've had this very issue before but it turned out to be an external USB HDD that stopped it from booting up but now even with everything removed it still won't boot.
And it was fine until yesterday, it just gave up.. I am away from home for work so I have all the work stuff and unfortunately without my recovery cd, but my guess is that it won't even read it..
So this is what happens..
turn on..
all light come on.. including power and all the white lights around the keypad..
and then maybe 5 sedconds later caplock and numlock(?) green lights flash..
then it's a dead still.. no HDD activities or sound.. just dead quite..
the screen remains black blank through out..
it seems to get stuck here before reaching the post screen.
i thought the power button usually took more than just a push to turn off? it instantly swithces off with a single push of the power button..
I think this laptop is like on sleep or something and can't seem to wak up.. maybe?
And it has vista.
Please help.. I have some important work files I need to recover at least before formatting..
and that has to wait till I get home which won't be for a month or so..
which also lets me take it back for warranty as well..
any help appreciated!!!
cheers,
MinQuote
Originally posted by syar2003
If running a LCD display with DVI connection , try to hook it up with
an analog VGA cable.
Can also be that the motherboard fails to initialize the vga AGP card.
Turn off all power incl. AC .
Disconnect all devices from motherboard : AGP/memory/drives/floppy/USB/PCI cards etc. take out the 20pin & 4pin PSU connectors and reset the motherboards
cmos .
Assemble PSU connectors ,only one DIMM module and graphics card and turn it on and se if you get a post .
Just removed all components. I reset the CMOS. I then reconnected the 20pin and 4pin, 1 stick ram, and the video card (no ide devices, no mouse, keyboard cd drives) and the monitor doesn't show up. I also tried another monitor so it isn't the monitor.
Could it have a bad AGP port?
Any other suggestions? I am thouroughly stumped. Also the power and reset buttons don't work no matter what configuaration I put the front panel connectors in. The Power LED is lit up and it doesn't work and the reset light is off and it doesn't work.
Also noticed one of my fans connected to one of the two other fan pins on the motherboard isn't working.
What a nightmare. -
Can't group text or send/receive picture messages! Please Help!
Hell Everyone,
so I just recently switched from my Iphone back to my blackberry for simplicity/practical reasons...I couldn't deal with the iphone anymore. In doing so, I came across a problem. I am not able to send group texts or send/receive mms. Everytime I try to do so, the text has a red 'X' next to it showing that it didn't go through. I am currently with ATT and have tried calling them to resolve it but no one knows.
here are some of the steps I took to resolve it
1. Resetted to Factory Settings - Did not work
2. Made sure all the settings in my text message options is selected properly - Did not work
3. Deactivated iCloud/iMessage on my previous iPhone - Did not work
4. Called ATT and had them make sure BB Data plan was on my plan, and it was - Did not work
Can someone please help?
Thank you,
PogosHi and Welcome to the Community!
With a strong carrier network signal (e.g., not merely WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB...please wait for that before proceeding to the next step):
1) Register HRT
KB00510 How to register a BlackBerry smartphone with the wireless network
Please wait for one "registration" message to arrive to your Messages app
2) Resend Service Books
KB02830 Send the service books for the BlackBerry Internet Service
Please wait for "Activation" Messages, one per already configured email account, to arrive in your Messages. If you have no already configured email accounts, please wait 1 hour.
3) Reboot
With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.
See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Hopefully that will get things going again for you! If not, then you should re-contact your mobile service provider for formal support...be sure to request their dedicated BB support group. MMS is a specific service level that must be properly enabled on BBs in order to function. Often, the first support group you reach will not understand the proper method for configuring this on BB...but their dedicated BB support group will.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code
Maybe you are looking for
-
Hi Can I use javaBean inside the oracle forms6.0(not 6i) in client/server mode(not in web form or 3 tier)? If it is possible,can u send the sample code?Please help me to solve this problem regards Rama
-
Hi All, I am having an issue with few of our invoices are not releasing for payment. Couple of them I noticed were due in June or July but were notpaid. These invoices were blocked due to price variance. Someone went and changed the price in P.O so
-
Pdf file (pages template) is too big
I created a newsletter from the "Green Grocer" newsletter template on pages 08. It looks great. I have exported it as a pdf file, but now the file size is 18 MBs and too large for most people to read. It's only two pages. Help! The artwork was not th
-
Forecasting in DP: At aggregate level or at detailed level?
Hello All, I have selection ID in APO DP 4.0 comprising of may products. I forecast them as a whole using some forecast method (may be seasonality method). How SAP DP forecasts? Does it individually forecast for each product or does it forecast at ag
-
How can I connect the EMF of Early commitment (RE) to the commitment?
Dear Experts, We have 2 kinds of EMF: 75 (Early commitment of real estate) and 77 (commitment of real estate). Now we can watch them seperately on transaction FMY3 & FMZ3 respectively. We cant to customize the connection between them, namely when you