Please Help - Reducing pixel density on existing slideshows so that Premier Elements does not crash
Hi,
I have been having trouble creating a DVD using a combination of PSE 6.0 and Premier Elements 4.0. I have created several slideshows in PSE, and was combining them in PE 4.0. I was having trouble as I added slideshows, and read the following that indicates my problem is sending overly dense files to Premier Elements (http://www.adobeforums.com/webx/.3bb8822c).
So now, I need to change the pixel width of all of the photos and get them back into the slideshows. I can't find an efficient way to do this. Any help would be appreciated.
Issues:
* Slideshows appear to take the top Version of a file. This is a nice new feature (from 4.0)
* I can process multiple files in the editor, but I can't save them back into the version set (if you know how, please tell me!)
* I found a (slightly cumbersome) way to save the new files back in a stack with the original photos. BUT Slideshow does not appear to use the top file in a stack (only top version)
SO... Any way to modify all the photos, and have them get back into each slideshow as I created it originally (without having the go through each slideshow, and add the new photo, and remove the old, and set the timing and the transitions...
Please help!!
Thanks,
Eitehr your Windows installer is damaged or you run without sufficient user privileges. Run Windows Update to repair the installer and make sure to run as admin. also turn off any security stuff temporarily.
Mylenium
Similar Messages
-
hullo,
does anyone know how to turn off cloud backup?
my ipad has a message on it that says my icloud backup is not happening and i cant use the ipad as everything is frozen. clicking on the ok buttom does nothing!
the ipad is locked, wifi is on it is plugged in -
i cannot switch it off either- the power button will not switch off eitherWelcome to the Apple Support Communities
Hold Sleep and Home buttons until the iPad restarts (about ten seconds), so you will be able to use the device again after having it restarted -
hi... can someone please help me.. i want to download the latest ios, but do not have the software update option in the general settings....
Connect it to iTunes on a computer and update it from there.
(73609) -
Can someone please help. I have a really old MacBook that is running really slow. I want to wipe everything and reinstall the latest software but don't know how to do this. Also is there a way of keeping Microsoft Office when doing this? Thanks in advance
You do realise that wiping the disk means that everything on the disk is erased. Everything. Photos, music, emails, ...
So the first piece of advice is to make sure you have a back up of everything.
You need the OS disk to reintsall the operating system. You will use that disk first to erase the drive, then to reinstall the OS.
Here's the link for the US. http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
As for MS Office, you will need the original disk that it came on to reinstall it. -
Hey, i have an iphone 4, and it is upto date, the problem is that my phone does not play any videos online except on facebook, all other videos do not play instead a crossed play sign appears on the video. Please help.
I watch YouTube videos on a regular basis - mostly with the YouTube app but also with Safari.
Some YouTube videos are supported to be viewed on a computer only or with a Flash capable device, which is becoming few and far between since Adobe no longer supports Flash on any mobile platform.
Sometimes I get this video cannot be played on this platform, but rarely. -
I have an Apple Configurator install that wont recognize an iPad when I attach it via USB. I cant prepare it or refresh it. It was supervised. I get an error message that says "policy does not have correct profile data". At some point there was a mismatch between the profile on the iPad and the MAC server. The profile on the MAC server has been deleted and the iPad has been erased and reset to default. I need to be able to get Configurator to recognize this device to prepare it for deployment and issue Apps to it. Please help!!
Run the application 'Terminal.app' which you will find in '/Applications/Utilities' on your Macintosh.
Type this into it: defaults delete com.apple.configurator PreprationSavedPolicyDefaultsKey
Hit the return key.
If you get no error message, it worked, and you can quit the app. -
Hello I am using Ipad 4 and its charger is not working while I was using it few days before and it was working properly now it says that the cable does not support this Ipad Please Help me out.
Try a reset:
- Hold the home button and sleep/wake button down at the same time. When the Apple logo appears release both buttons then try and charge again.
If issue persists try:
- Another known working cable
- Check the charging port for any damage or debris
- You could also use a dry soft bristle toothbrush and gently brush it on the port to clean it of any debris that could be in there -
Cost element does not exist in CO
Hi SAP folks,
In new co code we have copied GL codes from co code 1000. Now while changing cost element in KA02 system gives error message like "Cost element does not exist in controlling area". Why this error message is comming, however all cost elements are automate come from co code 1000....right....how to solve this issue...please anyone do help.....
how to copy cost elements to new co code from co code 1000 and How to extend existing cost centers to new code. Ex: co code 1122 has 3 cost centers and we need to extend the same to co code 1123. Controlling area is same for both co codes.
ThanksHi Eli,
Really, i appreciated for your help.
But, still my question is not to be answered. I am giving entire picture what i have done earlier.
1. I have copied 2 co codes(CACA & CACB) from 1000 co code
2. I have created new chart of a/c (CACA) and assigned to co codes
3. I have co area as INT and assigned to co codes
4. I have copied gl codes to 2 co codes from 1000
5. I have created 5 cost centers newly in 1 co code area
Here my question is:
- We need to extend same cost centers to another co code
- When i am changing cost element, system gives error like no CE in co area..why? and how to resolve?
Thanks -
Run As Account does not exist on the target system or does not have enough permissions
We are getting below alerts,
Run As Account does not exist on the target system or does not have enough permissions.
I know we can create a Run As account with low Privilege can fix this issue ,
http://blogs.technet.com/b/kevinholman/archive/2010/09/08/configuring-run-as-accounts-and-profiles-in-r2-a-sql-management-pack-example.aspx
My question here is there is any other way to fix it. I tried giving below permission for scom_act account (we used for agent installation and has local admin rights) but still same issue and
also i tried with sysadmin access for scom_act as well but no luck still having same issue , any solution would be welcome
The min. Privilege for monitor SQL server
DB Server Level
a. VIEW ANY DEFINITION
b. VIEW SERVER STATE
c. VIEW ANY DATABASE
Each DB
a. SQLAgentReaderRole database role.
b. PolicyAdministratorRole database roleCheck below link
http://blog.coretech.dk/msk/run-as-account-does-not-exist-on-the-target-system-or-does-not-have-enough-permissions/
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali -
Hierarchy could not be included; root element does not exist ?
hi,
I try to change hierachie for the released WBS with function CN2W_WBS_HIERARCHI_CHANGE_STRU, but I got an error like : "Hierarchy could not be included; root element does not exist" But this does not happen when we change the WBS hierachie in CJ20N, Could you please help me how to change hierachie for the released WBS using the function ? And Which function I can use ?
Thanks in advanceyou are using correct function module. Just check the values in Up and down columns .
-
XPATH Condition to check if an element does not exists
Hi Experts,
I want to know the XPATH condtion to check if an element does not exist.
I have searched the forum but could not find a relevant discussion.
Please help.
Regards,
Ravi kanth TalaganaLeft Operand should be your element on which you need to implement the condition
Middle Operand (Condition column) should be Not Equal
Right Operand should be constant EX
I used this condition in RD to route a file from source to target if some element is not present in the file....not present means not even a blank entry for the element....
Check it and let me know the result.
Regards,
Abhishek. -
Activity Type: cost element does not exist
Dear All,
I am working on ERP configuration for PP module as an academic exercise. I am already through with FI, CO and MM modules.
I am not able to get through the Activity assignment step in PP module. (Accounting u21D2 Controlling u21D2 Cost Center Accounting u21D2 Master Data u21D2 Activity Type u21D2 Individual Processing u21D2 Create). While creating activity type labor (labor hours), I am getting error "cost element does not exist for aggregated period"
In CO module I have created primary cost element for "Labor"(Category: primary cost/ cost reducing revenues). Also created secondary cost element for labor (cost element category: Internal activity allocation).
Can anybody guide me on how to go further?
regards,
SupriyaDear
Please revivew the following steps when you are creating a New Acvity type :
OP51 - Check Settings for formulas
OP54 - Check formulas for Costing
Ensure that usage of the parameters are indicated. Some parameters are appropriate for capacity calculation but not for schedule calculation. If you like to find out the parameter id, you could use the Search Fld. for Param. pull down button to do so.
KLH2 - Maintain hierarchy of Activity type group.
OP19 - Define standard value key
The purpose of standard value keys is to group together a set of parameters for the purpose of ensuring that the standard values for the parameters are supplied in the operations of the routing. This is so that the formula (for calculating cost, schedule, and capacity) could have the necessary figures to work with. Once the parameters are associated with the standard value keys, work centers quoting this standard values will be able to dictate whether or not the parameter values are optional or mandatory entry in the operations of the routing. The pre-requisite for using this transaction is that the parameters must have been pre-created.
KA01 - Create Primary Cost Element for the new activities type. Maintain Correct From and To date inline with Activity Type KL01 - Create Activity Type tied to the primary cost element. (the Cost element field)
KP26 - Change Activity Type/Activity Price Planning - maintain the Variable price
If the user include the additional activities in their work center, the routing that used the work center will required more time to finished the jobs.
The operations Start and Finish date will be extended due to the extra time spent on the work center. The cost of production increases in line with the extra activity which will be reflected in the Factory Output when you do a cost analysis in the production order. The new activity will have a price attached to it and the moving average price will increase.
Regards
JH -
Hi Experts,
I'm finding the below mentioned error while I'm saving assignment with Salary Basis, Location and Payroll.
APP-PAY-06153: System Error : Procedure pay_us_emp_dt_tax_rules.insert_fed_tax_row - ORA-20001: &1 element does not exist or has not linked to pay at step 4.
Please note that I am able to save the record if I do not any one of Salary Basis, Location. Payroll. It is basically happening on creating default tax.
Can anyone pleas let me know if you have facing the above error and resolved?
GuruHi Guru,
Did you check -
Error Saving A Salary Basis - pay_us_emp_dt_tax_rules.Insert_fed_tax_row (Doc ID 302878.1)
Cheers,
Vignesh -
Menu Element does not exist : not a valid ID (FRM-41067) error
Dear all,
I have removed from a menu an item but whenever i run the form i get the error Menu Element does not exist : not a valid ID (FRM-41067) i have searched for FIND_MENU_ITEM but i can't find the menu item id anywhere
What could be the origin of this error, any tips please?Hi!
Did you have taken a look to menu startup code property in the mmb?
There is often some code to hide menu items.
Regards -
I attempted to update the software of my dated iphone 3G last evening. My phone was constatantly connected with iTunes during the process. The iOS version 4.2 downloaded and installed successfully on my phone...only to state at the end that "Your SIM does not seem to be supported. Please insert a supported SIM....". It gives me no option on the phone other than making an Emergency call. I can't even restart or reboot the phone, or access springboard, etc. The black screen displays a USB cable plugged in to the iTunes logo. Incidentlly, I have been using this SIM for many months on this phone. I also tried inserting other functional SIMs. None of this works. Can someone help please!! Thanks,
Maybe it was hacked before and now through the update it's locked back to the original carrier.
Maybe you are looking for
-
HT5622 Can Face Time be used to connect with more than one person at a time?
Can I connect with more than one person at a time when using Face Time?
-
Hi experts, could you please suggest if is it possible to implement asyn sync scenario without using BPM. If answer is yes then how to go about it My Scenario is : File ->RFC ->File thanks in advance francis
-
IPod Male to female connector cable
Does an iPod "Male connector" to "female connector" cabe exist? I need to connect my iPod to the top connector of the iPod HiFi in a remote manner. My bookshelf does not have the height to fit the iPod ON TOP of the iPod HiFi...
-
We recently ordered a product key for crystal reports xi. We were told by the sales department that this key would work for crystal reports 8. The key did not work for crystal reports 8. I have tried to contact support and they pointed me to this for
-
How to create e Role Menu in WAD?
Hi Gurus, I was reading a document about WAD, and mentioned the "Role Menu" web item, so i tried to configured in my web template but i could do it. This is the HTML code that im using: <P><object> <param name="OWNER" value="SAP_BW"/> <param name="CM