Please help , regarding fair usage policy....subsc...

Hello Dear Moderator,
My skype id is pavank77
I had accidnetaly exceeded the unlimited india calling subscription on 1 april 2012 and my call would not connect, The subscription is still not active on 2 April 2012....According to skype as far as i searched in the forum it should be active today....
Please Help regarding this matter. Skype calling is important to me as i am far away from home.
I would highly appreciate your help.
Warm Regards,
Pavan

I am sorry to hear that your account has been suspended due to Fair Usage Policy.
For Skype to fully assist you with this concern, we can go through the email verification form by just clicking this link below:
https://support.microsoft.com/skype/hostpage.aspx?language=en&locale=EN-US&oaspworkflow=start_1.0.0....
1. Once you are on that page, choose Account and Password.
2. Choose Blocked Accounts.
3. Click on Next.
4. Click on Email Support.
5. Kindly fill out the form.
**Please make sure to enter as much information as you can for them to collate enough data to authenticate your identity. It is also important to include the Service Request number together with the issue <SR# - ISSUE>, on the subject field. Once the form is completed it will be forwarded to a special team who will handle your case. You will then receive a follow-up email and will be assisted further in resolving the issue/processing your request.
If one of my replies has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.

Similar Messages

Fair usage policy violation blocking

Dear Sir,
This has reference to your e-mail dated Augut 17th 2014, regarding fair usage policy violation.
This is to confirm that I am a law abiding citizen and I hereby also confirm that I have been using skype only for my personal, individual and non-commercial usage only.
Under the circumstances, you are requested to kindly restart the blocked services forthwith and confirm.
Thanking you,
Yours faithfully,
Hari1987

VINCQ wrote:
i got a mail about fair usage policy violation blocking. i didn't sharing and use it for commercial. how can i fix this problem.
Hello and welcome to the Skype Community.
You received this message because you have exceeded the call limits set out in this document:
http://www.skype.com/en/legal/fair-usage/
please contact Skype customer service
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

Extremely Unhappy With the Fair Usage Policy

Can someone please answer me this, what is the point of having a 20mbps unlimited connection when there is infact a cap of 100gb pm? It's such a rip off my blood is boiling!!!
I've gone over the limit apparently and had my internet connection butchered as a result. The assistant on the phone said it's a "slap on the wrist" I seriously thought what an unprofessional cow and wanted to tell her to f*** off if I'm honest. I don't expect such rudimentary terminology to be used on me when I'm a paying customer, it's outrageous.
Now I read the fair usage policy and find out why my BitTorrent speeds have been so terrible, even before the recent capping of my speed. On a well seeded torrent (2000+ seeders) in a fully port-forwarded uTorrent I am achieving 30KBPS. After midnight they improve but still only averaging around 300KBPS. They throttle P2P as part of the draconian policy! Use GLASNOST (google it) to see what horrible things they are doing with your P2P!
Can someone explain to me how you justify limiting a so called "unlimited" bandwidth at a rate that is only 60GB more than your capped packages? This is clearly false advertising and your fair usage policy is the worst I have ever encountered. Either this is resolved or you can forget it, I'm cancelling my subscription, you will not get another penny out of me, and you can take it up with my lawyer.

They say its not limited as you are only crippled during peak hours and can down as much as you like in the remaining hours **bleep**
If any post helps tick the star box on the left
Just cause Im paranoid dont mean they are not out to get me

Fair Usage Policy On Total Broadband Option 3?

I know the usage on BT Total Broadband isn't actually unlimited and it has a fair usage policy. This used to be 100GB but since BT Infinity came in I can't seem to find the policy on BT's site. Has it changed?
If my answer was helpful, please give me a star by clicking the star on the left hand side.
Thank you.
Solved!
Go to Solution.

robo878 wrote:
I know the usage on BT Total Broadband isn't actually unlimited and it has a fair usage policy. This used to be 100GB but since BT Infinity came in I can't seem to find the policy on BT's site. Has it changed?
Hi.
The 100GB figure has never been on the fair use policy site, and neither does the new figure of 300GB appear (it's been that since middle/late August).
For details see my shortcuts options 14a-c
http://www.andyweb.co.uk/shortcuts
http://www.andyweb.co.uk/pictures

Fair Usage Policy - 6 hours per day exceeded

Hi,
My Fair Usage Policy - 6 hours per day is about cross the limit. Is there any ways to reset it before GMT 0000hrs
rgds

Unfortunately no
Otherwise if everyone could reset it on their own then there is no point for the restriction.
Andre
If answer was helpful please mark it with Kudos and if issue is resolved mark it with solution. This will help other users find this answer more easily. Thanks in advance!

Fair Usage Policy On Total Broadband Option 3 - us...

Hi there!!!
I got kouple of question about this Fair Usage and hope someone will help me to get clear with it....
I started to experience some difficulties with connection lately, specially till 5pm....I'm on unlimited Option 3 and I know that Fair Usage Policy applies to heavy users... But since I haven't got any warnings from BT how do I know that I used my limit and they cutting my connection ????
Is there a option to monitor your usage with Unlimited connection???
Hope to get any answer which might help
Thanks!!

As I sad before I got connection beck today at 5pm...so it's connected since then. Till 5pm I wasn't able to connect at all...
here are results of the test:
FAQ
Test1 comprises of two tests
1. Best Effort Test: -provides background information.
2. Upstream Test: -provides background information.
We were unable to identify any performance problem with your service at this time.
It is possible that any problem you are currently, or had previously experienced may have been caused by traffic congestion on the Internet or by the server you were accessing responding slowly.
Download Speed
14958 Kbps
0 Kbps
21000 Kbps
Max Achievable Speed
Download speedachieved during the test was - 14958 Kbps
For your connection, the acceptable range of speedsis 4000-21000 Kbps.
Additional Information:
Your DSL Connection Rate :17169 Kbps(DOWN-STREAM), 1172 Kbps(UP-STREAM)
IP Profile for your line is - 15000 Kbps
The throughput of Best Efforts (BE) classes achieved during the test is - 21.69:22.21:56.1 (SBE:NBEBE)
These figures represent the ratio while sententiously passing Sub BE, Normal BE and Priority BE marked traffic.
The results of this test will vary depending on the way your ISP has decided to use these traffic classes.
Upload Speed
946 Kbps
0 Kbps
1172 Kbps
Max Achievable Speed
>Upload speed achieved during the test was - 946 Kbps
Additional Information:
Upstream Rate IP profile on your line is - 1172 Kbps

Is the Fair Usage Policy still 300gb?

Is the Fair Usage Policy still 300gb?
The reason I ask is that I've just checked and I'm at 294gb up until 23:59 on the 27th yet I haven't received any speed restriction warning emails this month when you usually get a mail at 240gb.
Solved!
Go to Solution.

Confirming Infinitechris reply.
If you are a P2P user note the part I have highlighted in Bold.
Quote below is from KerryG message #18 in THIS THREAD.-
Re: BT TO SCRAP 300GB LIMIT!.
on 08-03-2011 16h27
Hi everyone
Yes, this is true! BT Total Broadband and BT Infinity customers will benefit from the removal of Fair Usage Policy (FUP) controls when they begin to be removed from April 2011. Once removed, heavy user customers will be able to download/stream as much as they wish without having their speeds restricted.
BT will remove the FUP controls currently applied to customers with ‘atypical’ usage. Today atypical users are restricted at 300GB usage and account for less than 0.5% of the BT customer base. BT will not target any individuals with restrictions based on usage levels. However, we still have traffic management policies that will restrict certain applications / protocols, such as P2P, when the network is busy.
As BT continues to invest in the network and network bandwidth we can now remove these restrictions and ensure the experience of the wider customer base.
(Note that charges will still apply for going over limits on BT Total Broadband Options 1&2 and BT Infinity Option 1 but traffic will not be managed.)
Thx
Kerry
BTCare Community Manager
Please Click On any Text in Blue as that automatically links to information.
PC (NDEGR)

Fair usage policy

Does BT`s fair usage policy work both ways?? In the months when i dont use Broadband as much, why isnt this discounted off the months when i do? Surely on a fair usage policy this should apply!

Nice idea but its their usage policy and is fair to them so comes under the title of "who said life was fair"
If any post helps tick the star box on the left
Just cause Im paranoid dont mean they are not out to get me

Received" Fair usage policy violation warning" ema...

I just received an email from [email protected],and the subject was Fair Usage policy violation warning. This is ludicrous!
Basically the email says that after spying on my account,well they used the term"monitoring" which is ridiculous. they came to the conclusion that I was abusing the fair usage policy.
Firstly I felt that my personal privacy was violated by being spied on by Skype;
Secondly , the package I bought was 10000 mins phone to call worldwide, the reason why I purchase this particular package is becoz I was looking for a pair of Valentino lady heels, in order to have a bigger chance in finding them, I would have to call up as many stores as I can. And since this is what the package offers,I don't see what's wrong with me calling all the boutiques and department store branches. What I don't understand is how could calling stores in different locations has been judged as abusing fair usage policy?
This just became very personal, also I think what Skype did and the email going thru length to explain their suspection is absolutely rude and absurd.
I demand that Skype should stop violating SKype user's personal privacy and spying on their accounts. There're so many software out there right now,which would probably offer more service and respect for the consumer, and I'm sure Skype will lose more users if they keep on spying on our accounts.
And I would really love to contact Skype customer service team over phonecall or email, unfortunately I've looked through SKype entire website,and there's no info related to that. If anyone knows how to contact Skype,do share please. I'll really appreciate that.
Thanks in advance!

I am using Skype premium Credit which allows me to make calls from my Mobile and Laptop to make unlimited calls to 50 countries. Sometime my wife uses my laptop to make call to my home country as well. Recently she went to Bangladesh and tried calling me from there few times. She came back two weeks ago and now nobody uses it from outside Australia.
But last week I received the similar emails from Skype like yours but I am not sure what they are identifying as fair use. I have read the fair use policy and I didn't do anything that is contradicting the policy. I have tried to get support related email address from Skype web but failed. Is there anyone who knows any contact info so that we can raise the issue with?
Another friend of mine was saying that first he received an email from Skype warned him of fair-use violation who is on a 600min per months subscription but hardly use few hundreds min and his service has been terminated temporarily the next day.
So if someone cal tell us what is going on and why they are doing it.

Please help regarding PLSQL coding standards

Hi,
Can you please send any document for PL/SQL coding standards,
Please help.. I did nt find any good resources on net regarding..
Pleease help me if any pdf regarding are exitst to my mail id
[email protected]
Thanks and Regards
asp

I did nt find any good resources on net regarding..Here is a list from the net for you to start with (courtesy of many of the fellow posters here in these forums), and there will be plenty more. Just need to search correctly.
http://www.redhat.com/docs/manuals/waf/rhea-dg-waf-en-6.0/ap-sql-standards.html
http://www.orafaq.com/faqplsql.htm
http://www.williamrobertson.pwp.blueyonder.co.uk/documents/plsqlcodingstandards.html
http://www.orafaq.com/node/48
http://apex.oracle.com/pls/otn/f?p=2853:4:11598658413321972351::NO::P4_QA_ID:3262
http://www.bbc.co.uk/guidelines/newmedia/technical/databases.shtml
Message was edited by:
Kamal Kishore
Message was edited by:
Kamal Kishore

Fair usage policy violation warning

Would like to know how it is determined for a violation.
Got an email on the subject line just now.
To me, i am calling only the regular numbers and in an emergencey now, calls are frequent and lenghtier. Most of the months so far my regular usage level is far below the minimum level and it can be verified.
Let me know what is the basis for the above notification. Is it based on the number os minutes consumed?
Awaiting the quick response to fix this!
[Removed for privacy]

I am using Skype premium Credit which allows me to make calls from my Mobile and Laptop to make unlimited calls to 50 countries. Sometime my wife uses my laptop to make call to my home country as well. Recently she went to Bangladesh and tried calling me from there few times. She came back two weeks ago and now nobody uses it from outside Australia.
But last week I received the similar emails from Skype like yours but I am not sure what they are identifying as fair use. I have read the fair use policy and I didn't do anything that is contradicting the policy. I have tried to get support related email address from Skype web but failed. Is there anyone who knows any contact info so that we can raise the issue with?
Another friend of mine was saying that first he received an email from Skype warned him of fair-use violation who is on a 600min per months subscription but hardly use few hundreds min and his service has been terminated temporarily the next day.
So if someone cal tell us what is going on and why they are doing it.

Please help regarding Flowcontrol

Greetings!
I have a Cisco switch model WS-C3650-48TS-S and I configured in one of its interfaces flowcontrol receive on but when I check the interface using show interface I noticed that input flow-control off and output flow-control unsupported I wounder why the flow control not working even i configured it already?
Interface configuration
interface GigabitEthernet2/0/3
switchport access vlan 111
switchport mode access
flowcontrol receive on
show interface output
GigabitEthernet2/0/3 is up, line protocol is up (connected)
Hardware is Gigabit Ethernet, address is f8c2.8857.340d (bia f8c2.8857.340d)
Description: N5Strg iSCSI Port
MTU 9198 bytes, BW 1000000 Kbit/sec, DLY 10 usec,
reliability 255/255, txload 11/255, rxload 8/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
Full-duplex, 1000Mb/s, media type is 10/100/1000BaseTX
input flow-control is off, output flow-control is unsupported
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:00:06, output never, output hang never
Last clearing of "show interface" counters never
Input queue: 0/2000/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 31653000 bits/sec, 3746 packets/sec
5 minute output rate 44204000 bits/sec, 4417 packets/sec
6668410425 packets input, 18568845018908 bytes, 0 no buffer
Received 8271 broadcasts (0 multicasts)
0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
0 watchdog, 0 multicast, 0 pause input
0 input packets with dribble condition detected
8040770794 packets output, 29759036783816 bytes, 0 underruns
0 output errors, 0 collisions, 1 interface resets
0 unknown protocol drops
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier, 0 pause output
0 output buffer failures, 0 output buffers swapped out
Please help me if you know why it does not work

Hi,
Cisco Catalyst switches generally do not support output flow control - they never send PAUSE frames - so the message about the output flow control being unsupported is normal and expected.
Regarding the input flow control, this feature has to be advertised by the link partner during linkup and autonegotiation phase. In other words, the device connected to this port must itself advertise the ability to use flow control. If the input flow control is claimed to be off then it may be caused by the device connected to this port that does not advertise this capability. You should check its NIC settings and optionally try to shutdown/unshutdown the port to go over the autonegotiation again.
Please keep us informed!
Best regards,
Peter

PLEASE HELP REGARDING EEWB!!!

after reading few blogs and on reading details on help.sap.com i have understand few things but can sumbody help me on the issue now i facing which may be a bit strange for as i was experimenting with the EEWB.
earlier i created few projects with extensions in EEWB which didn´t work out now when i try to delete them they r marked for deletion but not getting deleted as i m getting the following error message :-
The objects R3TR TABU CRMC_MAPPING und R3TR DEVC CRM_ORDER_EEW
cannot be edited together because the 1st object's original is in this system,
whereas the 2nd object's original resides in another system.
CAN YOU PLEASE HELP
THE system is giving errors when creaing new extensions for add new field saying delete the extension created before because of the transport layer has already been adjusted..

OSS message finaly resolved my query.
thanks

Please Help regard function that will return values of each JComboBox items

I'd like to create a function that will return values of each item on the JComboBox at a time when
I click on each item of a comboBox. I had this following codes, but didn't work.
Please help me !!!Please correct it... thanks a million
String wp;
String text;
String A[] = {"WARNIGNS","CAUTIONS","NOTES"};
JComboBox ABC = new JComboBox();
for (int i=0;i<A.length;i++) {
ABC.addItem (A);
text = Get_It(); //assigns each value of JComboBox's item to variable text when clicks at each item
//of a comboBOx
private String Get_It(){
ABC.addActionListener(new ActionListener (){
public void actionPerformed(ActionEvent e){
wp = (String)CBweapon.getSelectedItem() ;
return wp;

import javax.swing.*;
import java.awt.event.*;
import java.awt.*;
public class AlertFrame extends JFrame {
String s_alert[] ={"WARNIGNS","CAUTIONS","NOTES"};
JComboBox CBweapon;
String wpText;
public AlertFrame() {
super("Alerts");
Container contentPane = getContentPane();
contentPane.setLayout(null);
setSize(600,600);
CBweapon = new JComboBox();
for (int i=0;i<s_weapon.length;i++) {
CBweapon.addItem (s_weapon);
contentPane.add(CBweapon);
CBweapon.setActionCommand("");
//set position for components
CBweapon.setBounds(370 + insets.left,295+ insets.top, 150,30);
System.out.println(getit()); //calling getit() function
//this function will be return a String of JcomboBOx value if click on each item of combobox
private String getit(){
CBweapon.addActionListener( new ActionListener (){
public void actionPerformed(ActionEvent e){
wpText = (String)CBweapon.getSelectedItem() ;
return wpText;
public static void main(String args[]) {
AlertFrame af = new AlertFrame();
af.addWindowListener(new WindowAdapter() {
public void windowClosing(WindowEvent e) {
System.exit(0);
**I have no errors on compile or run, but it didn't return a string value to System.out.println(getit());
It maybe because of the "void" of public void actionPerformed(ActionEvent e){
wpText = (String)CBweapon.getSelectedItem() ;
Please help me

Please help regarding method/function sign up validation with mysql jdbc.

HI guys,
I am have been fixing this problem for days, hope that someone could help me find the bug on my code.
I have 3 files:
1.WithAuth.java - for database jdbc mysql connection
2.WithAuthMet.java - method that will read any variables that will be passed to it. this method is waiting for two variables, a and b. a for userName and b for userPassword.
3.WithAuthTest.java - the testing class, this is where i declare my sample control data to test the database connection and query.
here's the actual codes:
WithAuth.java
package com.Auth;
public class WithAuth {
    static String userName = "root";
    static String userPassword = "";
    static String databaseUrl = "jdbc:mysql://localhost:3306/javatowebservice";
    static String userQuery = "select * from userlogin";
}WithAuthMet.java
- this is where the error is and where I messed up.
package com.Auth;
import java.sql.Connection;
import java.sql.DriverManager;
import java.sql.ResultSet;
import java.sql.Statement;
public class WithAuthMet extends WithAuth {
    public void connect(String a, String b)throws Exception{
        //try {
            Class.forName ("com.mysql.jdbc.Driver").newInstance ();
            Connection conn = DriverManager.getConnection (databaseUrl, userName, userPassword);
            Statement stat = conn.createStatement();
            String query = userQuery;
            ResultSet result = stat.executeQuery(query);
            System.out.println("Result(s): ");
              while (result.next ()){
                  int i = result.getInt("userId");
                  String name=result.getString("userName");
                  String password=result.getString("userPassword");
                      //System.out.println("test data:"+a);
                  if(a.equals(name.equals("userName"))&& b.equals(password.equals("userPassword"))){
                            System.out.println("User is Valid");
                        else{
                            System.out.println("You are not a Valid User");
                            System.out.println("test data:"+name);
                            System.out.println("test data:"+password);
                            System.out.println("test data:"+a);
                            System.out.println("test data:"+b);
                  //conn.close();
               // }catch(Exception e){
                //System.out.println("Exception is ;"+e);
                //System.out.println("Exception is ;");
//                if(a.equals(name.("userName"))
//                    && password.equals(password.equals("userPassword"))){
//                    System.out.println("User is Valid");
//                else{
//                    System.out.println("You are not a Valid User");
} WithAuthTest.java
package com.Auth;
public class WithAuthTest extends WithAuthMet{
    public static void main(String[] args) throws Exception{
        WithAuthMet CTD = new WithAuthMet();
        String a = "dan";
        String b = "password";
        //CTD.connect(String name,String password);
        CTD.connect(a, b);
        //return connect;
}please help.

yakultyakultyakult wrote:
WithAuthMet.java
- this is where the error is and where I messed up.
package com.Auth;
import java.sql.Connection;
import java.sql.DriverManager;
import java.sql.ResultSet;
import java.sql.Statement;
public class WithAuthMet extends WithAuth {
public void connect(String a, String b)throws Exception{
//try {
Class.forName ("com.mysql.jdbc.Driver").newInstance ();
Connection conn = DriverManager.getConnection (databaseUrl, userName, userPassword);
Statement stat = conn.createStatement();
String query = userQuery;
ResultSet result = stat.executeQuery(query);
System.out.println("Result(s): ");
while (result.next ()){
int i = result.getInt("userId");
String name=result.getString("userName");
String password=result.getString("userPassword");
//System.out.println("test data:"+a);
if(a.equals(name.equals("userName"))&& b.equals(password.equals("userPassword"))){
System.out.println("User is Valid");
else{
System.out.println("You are not a Valid User");
System.out.println("test data:"+name);
System.out.println("test data:"+password);
System.out.println("test data:"+a);
System.out.println("test data:"+b);
//conn.close();
// }catch(Exception e){
//System.out.println("Exception is ;"+e);
//System.out.println("Exception is ;");
//                if(a.equals(name.("userName"))
//                    && password.equals(password.equals("userPassword"))){
//                    System.out.println("User is Valid");
//                else{
//                    System.out.println("You are not a Valid User");
This is one line that is wrong
                   if(a.equals(name.equals("userName"))&& b.equals(password.equals("userPassword"))){You have 'a' and 'b which are Strings
and you are comparing them [using equals()] with the boolean return from another set of equals() invocations.
String equals boolean will always be false (well, maybe not if the String is "TRUE" or "FALSE" - and you would need some more boilerplate to make that work).

Please help , regarding fair usage policy....subsc...

Similar Messages

Maybe you are looking for