Please help restore search box?
my husband accidentaly deleted the area where you type the site...you know where u write "www. ect.. how do i get it back? please help thanks
That information is kept as temporary data. It could have been cleared
by the Firefox settings;
Type ''' about:preferences#privacy''' <Enter> in the address bar.
The button next to '''History,''' select '''Use Custom Settings'''.
At the bottom of the page, turn on '''Clear History When Firefox Closes.'''
At the far right, press the '''Settings''' button.
It could also have been cleared by your anti-virus settings.
Similar Messages
-
I am facing wifi and mobile 2G signal issue after upgrading to IOS 6 from IOS 5 in IPhone 3GS. The mobile carrier signal as well as WIFI suddenly drops zero and are then restored automatically. Sometimes i cannot conenct to WIFI even standing infront of WIFI router. Please help, restoring setting even didn't helped.
Update: my phone's connecting to the WiFi again. I don't know what did the trick. I did nothing since reinstalling the software. It hadn't worked then, it is now. I tried connecting to my dad's phone's hotspot( he uses a Moto G), and it worked. I then tried connecting to the WiFi at a friend's house, and when I came back home, my phone was able to connect to my WiFi! Is it of any significance that my friend's router doesn't require a password? My issue has been resolved( for now; I hope I'm not counting my chickens before they've hatched). For anyone facing a similar issue, I suggest you try everything I did:
1. Turn your router off for a minimum of 30 seconds, turn it back on and try connecting.
2. Click on the WiFi network you are connected to, scroll to the bottom, tap "Renew Lease".
3. Do a soft and hard reset.
4. Reset network settings.
5. Back your data up, erase all content from settings menu, restore from backup.
6. Reinstall your software( put it in recovery mode).
I am not sure which of the above worked for me. Make sure you try everything. If none of the above works, take it to a genius bar or an authorised service provider. Good luck! :) -
I have been using GRAB to capture screen displays. It has just stopped working since the last OSX Upgrade. Can anyone, please help restore functionality?
Thanks for that. I did as suggested but when I tried again, it still did not work. Another com.apple.Grab.plist appeared in the Library.
I now have the following files in Library
file://localhost/Users/peterpatel/Library/Preferences/com.apple.Grab.LSSharedFil eList.plist
file://localhost/Users/peterpatel/Library/Preferences/com.apple.Grab.LSSharedFil eList.plist.lockfile
file://localhost/Users/peterpatel/Library/Preferences/
file://localhost/Users/peterpatel/Library/Preferences/com.apple.Grab.plist.lockf ile
What do you suggest I do now? -
Please help my email boxes have gone .i am not very technical so need very simple words.
Please help my email boxes have gone .i am not very technical I am the older generation.
Lyndaneedshelp wrote:
Thank you for replying . I do not have the all mailboxes in the left hand side of the email page. I cannot go to any of my mailboxes . I am receiving mail but the can put them in the boxes but cannot go into the boxes. Hope I am making sense. I am not very technical older generation. Thank you
OK. Sounds like you are simply below the top level of the Inbox menu. Look at the upper left of the mail box list. You should some text (what exactly will depend on where you are) precedded by an <. Tap on that until you return to the top of the list.
Also - Phil could very well be correct (hard to say with being able to see your screen). -
why did recent update change my dafault browser to yahoo instead of google? when i type at home page beneath icon my default SE is Yahoo.please help restore to google
What you are experiencing is 100% related to Malware.
Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us! -
HT204150 I accidentally deleted all my contacts in the Cloud, please help restore!
I accidentally deleted all my contacts in the Cloud, please help restore!
Tap Settings > iCloud
Switch Contacts off then back on.
If that doesn't help, try here > iCloud: Restore your iOS device from iCloud -
Help menu "Search" box missing in Dreamweaver 5.5 for Mac
I've just upgraded from CS3 to CS5.5 on Mac OS 10.6.8 and am still finding my way around the new menus. The easiest way to find a menu command is usually to use the spotlight type "search" box that appears at the top of the help menu, which flags up exactly were each command is when you type in it's name. However, while the search box is there in my other CS5.5 applications it's missing from Dreamweaver. Can anyone tell me how to fix this?
I have tried the obvious things like repairing permissions and rebooting and have also got Spotlight to re-index my hard disk in case the fault lay there, but it didn't help.
Just to clarify, here's how the help menu looks in Dreamweaver with the "search" box missing.
And here's how the "search" box appears in the other CS5.5 applications.You need to use F1 key to launch this window:
Alternatively, you can download the full helpfile in pdf form from this link:
<http://help.adobe.com/en_US/dreamweaver/cs/using/dreamweaver_cs5_help.pdf>
Adobe help system is now online so that you have access to the latest info at any time including solutions given in these forums.
hth -
IPhone unplugged during Restore Process, PLEASE HELP Restore!
Hi guys,
I was Restoring my original iPhone through iTunes and during this process my brother unplugged
the iphone from iTunes.
Now, I've been trying to restore again but the iTunes has prompted a little window that says
"Waiting for iPhone". I left it plugged in all night with iTunes on my Mac but it's stuck on that same
message.
Can someone please help me with this issue?
Thanks so much,
ZTry placing your iPhone in recovery mode.
Turn off your iPhone by holding the "Sleep/Wake" button for about five seconds and then sliding the red slider. If your iPhone is already off, there's no need to turn it on and then off again.
Once it's turned off, press and hold the "Home" button and plug the iPhone into your Mac.Keep holding the "Home" button until you see a dock cable pointing to the iTunes icon. iPhones running older software will display a yellow triangle and text which says "Please Connect to iTunes". You can now release the Home button.
Open iTunes (if it's not already open) and you will be told that "iTunes has detected an iPhone in recovery mode". Click "OK" and you will be taken to the iPhone pane. Click restore. -
In every program, I'm missing the useful little search box in the help menu. This is what it looks like:
I first noticed this when I started up Brackets. My uptime was 14 days, and some programs were still working (like Terminal), but every new one I opened had this problem. I tried doing killall SystemUIServer, which didn't work, and restarting didn't fix it either. Clicking the highlighted portion closes the "Help" menu and highlights it until another menu is accessed.
I miss this!
Anyone know what I could do to get it back?Woo, maybe we can figure this out!
The QuickLook plugins I was talking about are QLColorCode, QLMarkdown, QLStephen, and Suspicious Package. I doubt any of them have much to do with it.
I've been using AppCleaner and Alfred forever, never Quicksilver. Alfred has one workflow that lets you search for actions in a program's menus, which boils down to an AppleScript. This provides most of the functionality of the help search bar, but causes some apps including Chrome and Photoshop to crash (for which accessing the Help menu makes them crash as well).
I also have Mountain Tweaks, and I think I had Onyx at some point. I prefer the one-line "defaults write..." commands, and I've done too many to keep track of, but they don't usually cause any damage... I think BetterTouchTool may be the culprit but I have no idea why this would persist after removal with AppCleaner unless it left some kext lying around, and I don't know too much about managing those.
The first thing I tried when I noticed this was to do "killall SystemUIServer" (which didn't work of course) and I still think an app interacting with SystemUIServer is causing this. If you don't use iStat Menus it's probably not responsible, although it does use menucracker to behave like a system menubar icon. I've had it for too long to really be suspicious. -
Please Help - restore iphone from old backup
Dear Applers,
i got very complectated case,
i use Apple iPhone 3G (3.1.3) & Mac Book Pro (iTunes 10)
i took backup for my phone at 12 pm, at 5 pm i deleted my messages by accident and when i connected my mobile to the computer to get back my things the computer automaticilty synced my mobile and took a new backup at 5 pm.
when i right click > restore, the computer show me that the last backup is at 5pm which is i dont want because it doesnt have my data, i want to be able to restore from the backup that i took earlier that day.
i tried to go to Users/ Library / Application Support / Mobile Backup and i found that my old files still their beside the new files
i tried to delete my new backup files from this directory so that way it take the backup before it. it didnt work .. it just deleted every thing
i really dont know what to do i feel like my data is here but i cant access it
Please Help,
ThanksTo be able to read the content of those files inside the backup folder, you'll have to use special software like "backup extractor" http://supercrazyawesome.com/ for example. But don't use the original folder to test, copy it to another place on your HD and use this copy to try.
Some files are not replaced when a backup is made, only files that changed in data are replaced, as far as I know. -
Audio file not found. Please help restore??
Arrgh! Hopefully someone can help me! A section of recording has gone missing from my podcast made in Garageband 3 and I have no idea how to get it back!
The podcast was intact when I saved and closed down for the night, then in the morning when I opened the file, a message box popped up saying 'Audio file "Recording#586.aif" not found! It gave me the option to search for it, which I did, but nothing came up.
I've tried searching my computer and servers, but nothing again.
I have no idea how this could have happened! The strand of lost recording is in the middle of the podcast and the rest of the file is unaffected. Unfortunately, the strand was recorded separate to the preceding and following strands, so I can't recover the missing file by extending out the other strands. ****.
If anyone has any suggestions or can offer any help, I'd be super grateful!
ThanksAh okay, that's handy to know, thanks. But that shouldn't affect the original files that I'm salvaging, right?
I'm able to retrieve the unedited GB project files using FileSalvage, but that end bit of the recording is always missing. Even though these are the original files and nothing's been edited or chopped away.
The only thing that I can think might have caused this mysterious disappearance is that the segment that's gone missing is the very end bit of the project, and the recording only stopped because GB automatically stopped it. Due to lack of space or recording capacity or something. Maybe there wasn't enough memory or something to conserve that final segment. I don't really know... -
Please help with search function
Heya, im currently working on code that will allow me to add, view, search and remove prisoners and wardens from a prison system. So far i have managed to allow the user to add and view. Im a bit stuck on the search part of the code, its a bit temperamental :S, sometimes it will find and display the data, but other times it will not and comes up with the error
Exception in thread "main" java.lang.NullPointerException
at Prison.getNum(Prison.java:128)
at TestPrison.main(TestPrison.java:101)
Below i have put my Prison and TestPrison Class files and highlighted the lines the compiler said had the error, any help would be really appreciated because i really cant work out wats going on.
Prison
public class Prison
private Prisoner [] thePrisoner;
private Warden [] theWarden;
private HighPrisoner [] theHighPrisoner;
private int maxP;
private int maxPrisoners;
private int maxW;
private int maxWardens;
private int maxH;
private int maxHighPrisoners;
public String prisonName;
public Prison (String prison, int maxP, int maxW, int maxH)
prisonName = prison;
maxPrisoners = maxP;
maxP = 0;
thePrisoner = new Prisoner [maxPrisoners];
maxWardens = maxW;
maxW = 0;
theWarden = new Warden [maxWardens];
maxHighPrisoners = maxH;
maxH = 0;
theHighPrisoner = new HighPrisoner [maxHighPrisoners];
public boolean addPrisoner( Prisoner newPrisoner )
if ( maxP == maxPrisoners )
System.out.println("Prisons full");
return false;
else
System.out.println("Prisoner now in Prison");
thePrisoner[maxP] = newPrisoner;
maxP++;
return true;
public boolean addHighPrisoner( HighPrisoner newHighPrisoner )
if ( maxH == maxHighPrisoners )
System.out.println("Prisons full");
return false;
else
System.out.println("High Level Prisoner now in Prison");
theHighPrisoner[maxH] = newHighPrisoner;
maxH++;
return true;
public boolean addWarden( Warden newWarden )
if ( maxW == maxWardens )
System.out.println("We Have Anough Wardens");
return false;
else
System.out.println("Warden now working at Prison");
theWarden[maxW] = newWarden;
maxW++;
return true;
public void outputAll()
System.out.println("School Name: " + prisonName );
System.out.println("");
outputWardens();
System.out.println("");
outputPrisoners();
System.out.println("");
outputHighPrisoners();
System.out.println("");
public void outputWardens()
System.out.println("The Wardens:");
for( int i=0; i < maxW; ++i)
System.out.println(theWarden);
public void outputPrisoners()
System.out.println("The Low Level Prisoners:");
for( int i=0; i < maxP; ++i)
System.out.println(thePrisoner[i]);
public void outputHighPrisoners()
System.out.println("The High Level Prisoners:");
for( int i=0; i < maxH; ++i)
System.out.println(theHighPrisoner[i]);
public void getNum(String num)
System.out.println("---------------");
System.out.println("Search for Prisoner ID:");
System.out.println("---------------");
for(Prisoner nextPrisoner : thePrisoner)
--> 128 if (nextPrisoner.getNum() == num)
System.out.println(nextPrisoner);
else
System.out.println("Sorry no Prisoner ID found");
for(HighPrisoner nextHighPrisoner : theHighPrisoner)
if (nextHighPrisoner.getNum() == num)
System.out.println(nextHighPrisoner);
else
System.out.println("Sorry No Prisoner ID found");
System.out.println("");
TestPrison
import java.util.*;
public class TestPrison
public static void main(String []args)
String sN;
int sS;
String sA;
String tN;
int tS;
int input;
String aN;
int aS;
String aA;
int aL;
String aC;
String pN;
String rN;
Scanner kybd = new Scanner(System.in);
Prison prison0 = new Prison("Alcatraz",200,200,100);
do {
menu();
System.out.println("Enter Option: ");
input = kybd.nextInt();
switch(input) {
case 1:
System.out.println("Enter Name: ");
tN = kybd.next();
System.out.println("Enter Rank: ");
tS = kybd.nextInt();
Warden wardenObject = new Warden(tN,tS);
prison0.addWarden(wardenObject);
System.out.println("\nWarden "+tN+" Added!");
break;
case 2:
System.out.println("Enter Prisoner Security Level: ");
aL = kybd.nextInt();
if (aL > 3)
System.out.println("Enter Name: ");
aN = kybd.next();
System.out.println("Enter Remaining Jail Time: ");
aS = kybd.nextInt();
System.out.println("Enter Prisoner ID: ");
aA = kybd.next();
System.out.println("Can Prisoner Share Cell? ");
aC = kybd.next();
HighPrisoner highprisonerObject = new HighPrisoner(aN,aS,aA,aL,aC);
prison0.addHighPrisoner(highprisonerObject);
System.out.println("\nPrisoner " + aA + " Added!");
break;
else
System.out.println("Enter Name: ");
sN = kybd.next();
System.out.println("Enter Remaining Jail Time: ");
sS = kybd.nextInt();
System.out.println("Enter Prisoner ID: ");
sA = kybd.next();
Prisoner prisonerObject = new Prisoner(sN,sS,sA);
prison0.addPrisoner(prisonerObject);
System.out.println("\nPrisoner " + sA + " Added!");
break;
case 3:
prison0.outputAll();
break;
case 4:
prison0.outputWardens();
break;
case 5:
prison0.outputPrisoners();
break;
case 6:
prison0.outputHighPrisoners();
break;
case 7:
prison0.outputPrisoners();
prison0.outputHighPrisoners();
break;
case 8:
System.out.println("Enter Prisoner ID: ");
pN = kybd.next();
---> 101 prison0.getNum(pN);
break;
default:
System.out.println("Error Selection Does Not Exist");
break;
} while(input >= 0);
public static void menu() {
System.out.println("");
System.out.println("MAIN MENU");
System.out.println("*********\n");
System.out.println("1. Add Warden\n");
System.out.println("2. Add Prisoner\n");
System.out.println("3. View All\n");
System.out.println("4. View Wardens\n");
System.out.println("5. View Low Level Prisoners\n");
System.out.println("6. View High Level Prisoners\n");
System.out.println("7. View All Prisoners\n");
System.out.println("8. Search Prisoner ID\n\n");
Once again any help would really be appreciated : )The nextPrisoner is null, and you can't call getNum() on a null reference.
Try replacing that line with:if (nextPrisoner != null && nextPrisoner.getNum() == num) Oh, next time you're posting code, please use code tags:
http://forum.java.sun.com/help.jspa?sec=formatting -
I have a pretty large iTunes library, mostly "classical" music, and I've tried to improve on the Grace Notes database when ripping my CDs into iTunes.
Unfortunately, iTunes does not provide a great foundation for cataloging music with an opus number or a key so I've tried to standardize most things in the name field.
For example, the first movement of a Bach concerto might be listed as "Concerto for violin and oboe in c, BWV 1060: 1. Allegro" using a fairly standard lower case c implying that it is in the key of c minor.
So, to my question: How do I find all the pieces in the key of, say, c minor? When I do a search (in the search field with the magnifying glass on the top right) with the parameters +in c+ I get several thousand pieces listed, many of which do not have the string +in c+. (My total database is about 17,000 songs.) If I try to put quotes around it so that it reads "in c" I get nothing returned.
Is there a way to search for a string of characters including a space that is case sensitive?
Thanks for any assistance.
Message was edited by: BflatBluesThe nextPrisoner is null, and you can't call getNum() on a null reference.
Try replacing that line with:if (nextPrisoner != null && nextPrisoner.getNum() == num) Oh, next time you're posting code, please use code tags:
http://forum.java.sun.com/help.jspa?sec=formatting -
Can somebody help me wit hmy problem. I have a fom with many tables in it, some cells of the table are text boxes or at least they were when I developed it. Now I need to edit some of the cells and for some reason I cannot do it as the cell is not a text box but became (untitled<draw>) I cannot change its type back to text. Can some one advise what to do whitouh retyping text again in the new cell.
Many thanks in advanceYou are welcome!
I have a preference for Javascript (just get in the syntax zone) and use it for most things (except dates).
As you know:
this = current object
rawValue = accesses the value of object
From an Excel point of view FormCalc is similar and has inbuilt function like sum(), Max(), etc. Syntax is $ for current object and you don't need the rawValue. This is very handy when summing a column in a repeating table. Also FormCalc is excellent for working with time and dates. (not that you can't work around in Javascript, but it is heavier).
Adobe have a very good reference for FormCalc at http://www.adobe.com/go/learn_lc_formCalc_82 and I would recommend that to you. I think it comes from the LC help file, but is easier to use.
From a performance point of view, you can either have FormCalc in the calculate event of an object, which looks back at other fields (this will fire each time one of these fields changes). Alternatively you can have the FormCalc in the exit event of a field, which pushes a calculation/value forward to another object.
Functions are handy if you have a script that you are using several times in a form. You write the script in a "script variable" and then call it in the objects events. HOWEVER, script variables are available in Javascript only.
One last thing is that if you have a constant (like VAT), then rather than including "* 0.21" in all of your calculations, use a global variable in the Form / Properties / Variables tab. currentVat = 0.21. Then in your calculations would be "* currentVat.value". If the VAT rate changes then you only have to change it in one location.
In summary FormCalc is more akin to Excel; just watch the syntax.
Good luck,
Niall -
Please Help, Restored iPhone 4S, iOS 5.1.1, Lost Photos, Messages and Whatsapp Chats
Hi There,
I hope someone can help me with this, the stuff I've lost is so important to me it's actually scary. I can't beleive this has happened.
I last synced my iPhone 4s on the 29th August, there's been nothing majorly important put on since then so I can cope with losing the stuff that was saved in the interim.
Anyway, over the last few days when I connected the phone to iTunes i got an error message saying iTunes can't recognise the iPhone. Restore the iPhone in order to rectify this. So i downloaded iOS 5.1.1.
Then Last night i did restore the phone and install the new iOS... The restore went ok, but when it came to sync the phone from my last sync on the 29/08/2012 it said the sync could not be saved to the phone??? The phone had the correct contacts, music etc...but no photos... The Camera Roll has disappeared, all my previous SMS/iMessages and my conversations in Whatapp, my call history, my reminders in my Calendar, my Stocks, the cities I've listed in my Weather App.... you get the idea!
So at this point I restored the phone again and the same thing happened, however when I got the error message saying that the sync couldn't be saved to the phone then I tried again, and it synced successfully, but I think it's to this new "version/state" of the phone... So now my most recent sync for the phone was on the 12th August and all the photos, messages etc were missing when it went through...
How can I get my original stuff back? There were hundreds of photos on there that are of huge importance and I'm gutted at the thought of losing them.
Any Help would be hugely appreciated guys. I'm at a dead end here...
Cheers,
SeányAlso, my email accounts no longer show up in my Mail App.
Maybe you are looking for
-
When my Ipod touch is in autolock I can only restart the device holding the sleep/wake button and home button at the same time for 10 seconds. While in auto-lock it is using battery power and will do so until the battery is drained. Whats wrong?
-
SQ01, SQ01 - Sql Query Dislplay problem
Hi Need help in SQL Query I generated one sql query which has the following output in general . Customer name description amount asrq1 sharekhan Amount payed 10 asrq1 sharekhan Amount Adv
-
Itunes will not play music or other media files suddenly.
Itunes will be playing a file, usually an audio file, then suddenly it will stop playing mid track. When I tell it to continue using the shortcuts, or the controls, or window bar it says it playing but no volume is produced and the track does not act
-
Why do vector graphics appear pixelated when zoomed in, isn't fireworks meant to support vectors?
I am new to using Fireworks, but I thought it would be great since it has both vector and bitmap support. However, when I work with vector tools and a vector image I imported from Illustrator, if I zoom into the image, it appears as though it's a bit
-
Commit Handling for Synchronous Write Scenarios
Hello gurus, I have to use syncronous interfaces between SAP and custom UI application. SAP will both be client and server in different scenarios. I would like to know how I can achieve consistency for write operations with commit handling mechanisms