PLEASE help. Return to Quiz is creating problems
Thank you for reading this question.
I am using Captivate 6 with all updates.
I have a pretty lengthy tutorial. I wanted to implement remediation, which means the learner, when at the quiz, will be sent back to the slide with the correct answer, then returned to the quiz question he or she missed.
This should not be a problem. However...
As the learner progresses through the lesson (not the quiz section) the first time and gets to the slide right after "jump to quiz", the slide seems to stop at the beginning, displaying initial content, but stopping. It does not play the audio, and does not present additional information within the slide. If you press the play button at the bottom of the course, it procedes as normal. This is happening for every slide when remediation is requestion.
Details: For each quiz question, I have set "Last Attempt" to jump to slide. The slide provides the correct information located during the course. That is all I have changed for Quiz Properties. Let's say we are jumping back to slide 26.
At Slide 26, I click on my button to continue. For action, I change the option for "on success" to "return to quiz".
Here's the kicker. So when published or viewed, we get to slide 26 without problem. As it procedes to slide 27, this is where it displays initial information at time 0, but does not continue, nor plays audio.
As a test, I have deleted all frames in slide 27 with the exception of audio, or other. No good.
This is happening for ALL "return to quiz" actions.
This should not be rocket science. But I am totally stuck in the water. Would anyone know what I'm doing incorrectly?
Published as executable, viewed in latest FF and IE, as well as viewed within Captivate.
Thank you!
Well I found the answer. I was duplicating slides, and apparently this didn't work well with return to quiz element. Still not sure why, but when I created new slides, the remediation worked perfectly. Go figure. Hope this helps anyone else out who encounters a similar problem.
Mark
Similar Messages
-
iPhoto app stops responding upon launch. Please help how I can fix this problem., iPhoto app stops responding upon launch. Please help how I can fix this problem.
Please clarify:
What is your iPhoto version?
And what do you mean by "not responding"? Is iPhoto hanging and showing the spinning beachball?
Can you launch iPhoto, if you hold down the options key while launching and select or create a different library? -
I got this message every time i connect my iphone to itunes.. said 'iTunes was unable to load provider data from Sync Services. Reconnect or try again later.' so please help me to solve out this problem..
In the course of your troubleshooting to date, have you also worked through the following document?
iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert -
hi..i just bought an iphone 5 yesterday 32GB..and now when i am trying to update the software..it says the following: unable to check for update/an error occurred while cheking for a software update...please help me..is it a problem in my new iphone??or it's just an temporary error in the apple software center???
Lyndsay237 wrote:
This device does not have a sim card in it. Could this be the reason or am I missing something when I am trying to update.
Yes. You can't update or restore any GSM iPhone without a valid sim card installed in the phone. The sim card need not be activated, but it must be valid & present. If you want to update, you need to get a sim card. -
I bought CS6 creative suite. As of now i need to work each application in separate separate system. Can any one please help me how to solve this problem.
I saw the below quote on Adobe forum
"You may install software on up to two computers. These two computers can be Windows, Mac OS, or one each."
If i install each application in single single system the system count is more than two. In this case, are we have any license issue? Please advice how the problem will solve?
If possible please send the advise to my mail id: <Removed by Moderator>
Thanks
Uvaraj SI already answered that. If you purchased a Suite then you can only install and activate it on two machines. Even if you only insdtall one of the applications of that suite, it counts as one activation of the suite. You cannot take the six or seven different applications that might be in a suite and install and activate them in six or seven different machines... only two machines.
If your scenario will allow for it, one thing you can do is install the programs on all the different machines and only activate two of the machines at any given time. If you need to activate a program on a third machine then you need to deactivate on one of the currently activate machines first so that you have an open activation to use again. I do not remember if there is a limit to the total number of activations you can process for the life of the software. -
I got my Iphone 3gs unlocked, but Navigation and Compass are not working. Please help if anybody had faced this problem and got it resolved.
Only the carrier that the iPhone was locked to can unlock. There you go, hacking void any support from this forum.
-
PLEASE HELP ME I AM FACING A PROBLEM
My name is Ameer.
I watch youtube videos from ipad2 ( safari )
today for my first time, when i run a video and i want to pause it, i touch the screen where the video is playing to reach the pause botton that is located on a bar under the video which appears when i touch the screen. Today every time i touch the screen nothing happens and i cannt pause the video nor adjusting its quality.
So plese help me fixing this problem as soon as posible.
RegardsSame problem on my ipad mini, running ios 6.0.2.
A bit more info:
-tried using YouTube in Safari on another ipad. Worked fine.
Tried reboot (sleep + home buttons for 15 seconds). Didn't fix.
-tried logging out of my YouTube account, thinking the problem was tied to my settings. Didn't fix.
-tried uninstalling all apps I downloaded since the last time YouTube worked properly. Didn't fix.
-tried watching a video in desktop mode. Can tap video screen to bring up pause okay in that mode.
There are work arounds, but the thing I want to know is why YouTube doesn't work in Safari as of a couple of days ago, and is it indicative of another more serious problem with my ipad. -
Please Help Me With My Yahoo App Problem
Please Help Me With My Yahoo App Problem, Everytime I Want To Log In To Yahoo With Yahoo Application This Messege Appears, Please Help Me With this
Do you have a blackberry data plan as opposed to a standard carrier data plan?
-
i have windows 8 and I got this error "Adobe Photoshop has stopped working" whenever I start a program. please help. how can I fix this problem? many thanks
Please read these and proceed accordingly:
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html
http://forums.adobe.com/docs/DOC-2325 -
I am unable to download and always asking the password it's ok for the once and it's asking more and no results only repeating the same so I am unable to download please help me to sort out this problem and my request please sort out from your side or let me guide .
Thanks Eric for responding.
I checked and it does not appear in the Applications folder.
I tried yesterday on an ethernet connection with a download speed of 2 Mbps but, unfortunately the connection died(It happened from the ISP end, which is out of my control) in between after which there was no trace of the download that happened for so long(till the internet connection death).
One more serious query which I am unable to understand. If the internet connection, dies in the midst of the download is in progress why is it so that the state does not persist and one has to restart the entire process again. Is there no solution for this?
I tried so many times and its the same case after some amount of download it vanishes. So many unsuccessful attempts. I am ****** off now. Is it not possible to see Mavericks? Why does different machines of Apple behave differently? Somewhere it goes smoothly and somewhere like my mine. Why did not Apple release a non apple store version? Is this not a bad sign of letting the users struggle when something is being offered for free?
The reason I asked as whether we can download the .app of Mavericks is that, there are so many applications that I have downloaded web and have installed. All that works fine. Can't we do the same here? You download a copy of Mavericks installer application and upload it for me in Google drive or like online storage places which can be downloaded and used by me? Help me understand.
Thanks again. -
Please help me to visible the create event menu in workflow administrator.
Hi All,
please help me to visible the create event menu in workflow administrator.
(select workflow administrators responsibility navigate to administrator workflow -->
Business events-->events-->here i am seeing only search options,but i required create event,subscriptions.... )
Regards
GopinathHi,
please help me to visible the create event menu in workflow administrator.
(select workflow administrators responsibility navigate to administrator workflow -->
Business events-->events-->here i am seeing only search options,but i required create event,subscriptions.... )You should find "Create Event" and "Create Events Groups" buttons in the same page under "Results : No Search Conducted".
Regards,
Hussein -
Please Help!!!!! Problem Migrating from sql 2000 stored procedure to PL/SQL
I have used a tool to convert my sql 2000 stored procedure to Oracle 10g PL/SQL, here is an example
SQL 2000 Stored Procedure
CREATE PROCEDURE [GetEmployees]
AS
Select * from EMPMST ORDER BY emp_name
GO
After Transformation i got 2 files, one was a procedure and other a package
CREATE OR REPLACE PACKAGE GLOBALPKG
AS
TYPE RCT1 IS REF CURSOR;
TRANCOUNT INTEGER := 0;
IDENTITY INTEGER;
END;
CREATE OR REPLACE PROCEDURE GetEmployees
RCT1 IN OUT GLOBALPKG.RCT1
AS
BEGIN
OPEN RCT1 FOR
SELECT *
FROM EMPMST
ORDER BY emp_name;
END;
When i execute the procedure GetEmployees i got this error :
SQL> execute GetEmployees;
BEGIN GetEmployees; END;
ERROR at line 1:
ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'GETEMPLOYEES'
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
Please Help me in debugging this error. Thanks in advance.As the poster above mentioned you cannot call "GetEmployees" without a parameter.
Note that the procedure declaration has the following line
RCT1 IN OUT GLOBALPKG.RCT1
This means that whenever you want to call the procedure you must pass it a variable of type GLOBALPKG.RCT1
However unless this is merely a homework or learning exercise (i.e. you are not porting the code of a production application) i would strongly recommend that you do not attempt to simply convert the code to PL/SQL.
The reasoning behind this is that Oracle's architecture will be completely different to the source of the original code and if you attempt to simply port the code (especially using an automatic tool) you will almost certainly hit problems.
For example the SQL Server's 2000 code may (should be) be written based on SQL Server's locking strategy. Oracle's locking strategy is completly different if you try to use the same techniques as you do in SQL Server the performance will suffer.
Porting a code or a database schema from one platform to another involves a lot of analysis in order to take advantage of the features of the destination platform.
As I said this may not be important to you depending on why you are attempting a port.
Good Luck. -
Very urgent : please help !!!! Blowfish problem
Greetings people,
I have devised an application which reads the value from file and encrypts it (using Blowfish)......The file is then read and decrypted accordingly..............
Problem : I seem to be able to encrypt and further decrypt file(s) which size is below 100 bytes. Anything beyond that will trigger the following :
javax.crypto.IllegalBlockSizeException: Input length (with padding) not multiple of 8 bytes
at com.sun.crypto.provider.SunJCE_h.a(DashoA6275)
at com.sun.crypto.provider.SunJCE_h.b(DashoA6275)
at com.sun.crypto.provider.SunJCE_h.b(DashoA6275)
at com.sun.crypto.provider.BlowfishCipher.engineDoFinal(DashoA6275)
at javax.crypto.Cipher.doFinal(DashoA6275)
at LockDownBase.decrypt(LockDownBase.java:144)
Could someone please help me with this dilemma as time is of the essence at this point and I really need to get this thing up and running. (ps. It is necessary for me to retain the usage of the Base64 Encoder as I am conducting a study on the usage of this Encoder).
Thank you for the help
<code>
import java.io.*;
import java.math.*;
import java.security.*;
import javax.crypto.*;
import javax.crypto.spec.*;
import sun.misc.*;
public class LockDownBase {
private static String keyFile = "c:\\encode\\blowfishbase.txt";
public static String new_key (String me) throws Exception {
//Get a blowfish key
KeyGenerator keyGenerator = KeyGenerator.getInstance("Blowfish");
keyGenerator.init(128);
SecretKey key = keyGenerator.generateKey();
System.out.println("OK");
byte [] encoded = key.getEncoded();
FileOutputStream fos = new FileOutputStream(keyFile);
fos.write(encoded);
fos.close();
return me;
//initKey
public static Key initKey() throws Exception{
FileInputStream in = new FileInputStream(keyFile);
ByteArrayOutputStream baos = new ByteArrayOutputStream();
int i;
while((i=in.read()) != -1){
baos.write(i);
in.close();
byte [] keys = baos.toByteArray();
SecretKeySpec key = new SecretKeySpec(keys,"Blowfish");
Key keyword = key;
return key;
public static String encrypt (String location) throws Exception{
//PrintStream is deprecated, but works fine in jdk1.1.7b
//PrintStream output1 = new PrintStream(outFile1);
//get_key
String testme = "dummy";
Key key = initKey();
Cipher cipher = Cipher.getInstance("Blowfish/ECB/PKCS5Padding");
cipher.init(Cipher.ENCRYPT_MODE, key);
// read in the input file
String line;
StringBuffer buffer = new StringBuffer();
FileInputStream fis = new FileInputStream(location);
InputStreamReader isr = new InputStreamReader(fis);
Reader in = new BufferedReader(isr);
int ch;
while ((ch = in.read()) > -1) {
buffer.append((char)ch);
in.close();
line = buffer.toString();
byte [] cipherText = cipher.doFinal(line.getBytes("UTF8"));
//output1.print(" ");
// output1.println("ciphertext.length = " + cipherText.length);
// print out representation of ciphertext to general output file
BASE64Encoder encoding = new BASE64Encoder();
String feed = encoding.encode(cipherText);
FileOutputStream outFile2 = new FileOutputStream(location);
PrintStream output2 = new PrintStream(outFile2);
output2.close();
String dir = location;
FileOutputStream outFile3 = new FileOutputStream(dir);
PrintStream output3 = new PrintStream(outFile3);
output3.println(feed);
output3.close();
return location;
public static String decrypt (String location) throws Exception{
Key key = initKey();
String line;
String dir = location;
FileReader far = new FileReader (dir);
BufferedReader stdin = new BufferedReader(far,8192);
String line = null;
while ((line = stdin.readLine()) != null){
BASE64Decoder decoding = new BASE64Decoder();
byte[] decrypted = decoding.decodeBuffer(line);
Cipher cipher = Cipher.getInstance("Blowfish/ECB/PKCS5Padding");
cipher.init(Cipher.DECRYPT_MODE, key);
byte [] decryptedtext = cipher.doFinal(decrypted);
String output = new String (decryptedtext,"UTF8");
System.out.println(output);
FileOutputStream outFile1 = new FileOutputStream(location);
PrintStream output1 = new PrintStream(outFile1);
output1.println(output);
output1.close();
return location;
</code>The error message says it all.
Input length (with padding) not multiple of 8 bytes
As you are using PKCS5Padding you will have an output data whose length is padded with 1 a 8 bytes. For instance, if your original data have 1023 bytes, it is padded with 1 byte - total length = 1024. It your original data have 1024 bytes, it will be padded with 8 bytes (not 0 as you could think).
You have some problem encoding and decoding Base-64 - it is not yielding the original encrypted results. Your best friend is System.out.println of the length of the original and encrypted data. -
Please help... Foregin key problem
How come foregin key can't work? Someone please help me
This doesn't work. (Item not found)
==========================================================
cursor my_cursor is
Select USER_ID
FROM NETWORK_ACCOUNT
where v_gobal2= ID_NUMBER;
begin
v_gobal2 := :CHECK_ID;
open my_cursor;
fetch my_cursor into v_gobal1;
==========================================================
But how come if i change this line 'where v_gobal2= N_PASS;' or any not foregin key attribute, it work?
By the way 'ID_NUMBER' is a foregin key on NETWORK_ACCOUNT table
while 'N_PASS' is an attribute of the same table
I dont understand??
Below is my NETWORK_ACCOUNT create table
CREATE TABLE "NETWORK_ACCOUNT"
( "USER_ID" VARCHAR2(20),
"N_PASS" VARCHAR2(20) NOT NULL ENABLE,
"ID_NUMBER" CHAR(10),
"STAFF_NUMBER" CHAR(10),
CONSTRAINT "NA_USER_ID_PK" PRIMARY KEY ("USER_ID") ENABLE,
CONSTRAINT "IDNUMBER_FK" FOREIGN KEY ("ID_NUMBER")
REFERENCES "IDCODE" ("ID_NUMBER") ON DELETE SET NULL ENABLE,
CONSTRAINT "NA_STAFF_NUMBER_FK" FOREIGN KEY ("STAFF_NUMBER")
REFERENCES "STAFF" ("STAFF_NUMBER") ON DELETE SET NULL ENABLE
All i wan to is to get the user_id when user input ID_NUMBERyour problem has nothing to do with Foreign-keys!!!
Both the columns that you are using as FKs, you have defined them as "CHAR(10)" (well, because they are CHAR(10) in the parent/referenced tables). Had you defined them as VARCHAR2(10) both in child table (network_account) and the parent tables (idcode and staff), you'd have faced no problem. I m not sure why you are using CHAR(10) but if you change your code like this, it should work:
original: where v_gobal2= ID_NUMBER;
changed: where RPAD(v_gobal2,10) = ID_NUMBER;
When column data type is defined as VARCHAR2, oracle does not store white spaces but in case of CHAR, Oracle will add white spaces if the input value is not of exat length.
I'd strongly recommend you use VARCHAR2.
Hope this helps!
Saeed -
PLEASE HELP me with my Client/Server problem !!!
I have a method that can currently only recieve one file at a time, but I need it to be able to recieve multiple incomming files. My problem is that it can recieve the first file, but when the send file is sent to this method, it freezes. Can somebody please help me debug it!! I need to get this working by tonight. Thanks!
public class A implements Runnable {
String hostname;
private Thread runner;
public A () {}
public void receive() throws IOException {
try {
while (true) {
Socket s = ss.accept();
s.close();
} catch (Exception e) {
System.out.println(e);
public void run() {
try {
ServerSocket ss = new ServerSocket(1111);
while (true) {
receive();
} catch (IOException ioe) {
System.out.println("IOException in run()\n" + ioe.getMessage());
private void stop() {Runner = null;}
public void request(String fileName) {
if(runner == null) {
runner = new Thread(this);
runner.start();
try {
send(fileName);
} catch (Exception e) {
System.out.println("Exception in run()\n" + e.getMessage());
}you have a while(true) in your receive, so you accept the socket, do the // ... stuff, close it, and then sit there waiting to accept another one again. Am I seeing that correctly?
Maybe you are looking for
-
What certs are needed in Exchange 2013?
When I look in the certificate store in the Exchange Administrative Center I see 3 certificates. The one I used to self sign during installation, the one I created utilizing the local CA, and the other cert I don't know what it is. The first cert
-
Changing the LTS and physical source of the presentation fields
I am using 11.1.1.6.2 obiee admin tool, in presentation layer I have 3 different subject areas and multiple folder with different names. I used same field in multiple folder in all the subject areas with same name , in below example I am using same f
-
Delete Folder? No space! HELP!
Its Confusing but hear me out! I accidently deleted my itunes but luckly i fugured out how to get songs from my ipod onto my computer! So i put those songs in a folder and then opend the folder on my itunes. They went on! But now there is less than a
-
How to Encrypt - Decrypt the Passwords
Hi, i am developing an integration between SAP and SFTP. i want to save the encrypted password of SFTP to database tables and then i want to use the decrypted password to connect SFTP. how to convert the encrypted password to decrypted? can somebody
-
IPhoto Book - unable to complete purchase
I successfully completed the compilation and purchase of a nice iPhoto book for a relative's wedding last week. Now I've finished making a second one and for some reason I'm unable to complete the purchase. It uploads all the pictures and compiles th