Please help.... Safari links gone from screen.
I highlighted a link in the url area (not a computer guy, not sure what that line is called..) and hit apple key and mouse button for a couple seconds-I was trying to download the link- and now the entire url bar is gone, only my bookmarks and a grey screen above it.
where it used to say
www.apple.com
(bookmarks.....)
it now says nothing
(bookmarks)
any ideas?
thanks
I assume you're using Safari? In the View Menu, you should see "Show Toolbar." That should do it.
Similar Messages
-
hello please help me my MacBook Pro screen when desktop switching fingers pressing 3 distorts a bit, with him?
First, remove Comodo. You don't need it, and it sounds like it is causing a problem.
The other symptoms sound like you have adware installed. Comodo might have detected some components of that adware, or it might not have, but whatever the case, you should NEVER allow any anti-virus software to quarantine or delete files from your computer. See: How to remove infected files.
Regarding the adware, see my Adware Removal Guide.
(Fair disclosure: The Safe Mac is my site, and contains a Donate button, so I may receive compensation for providing links to The Safe Mac. Donations are not required.) -
How do I get my old apple ID/email from popping up and asking to verifie it's getting annoying? I've change everything to my new email an my old one keeps popping up please help me stop it from popping up all the time?
Did you change the ID you are using for iCoud? If so, did you delete the account, then sign back in with your new ID on your device?
-
Please help my ipod disconnected from the Internet and wont reconnect and i did the right password
please help my ipod disconnected from the Internet and wont reconnect and i did the right password
- Do other devices still connect to the network?
- Does the iPod connect to other networks?
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router.
- Reset networks settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points -
Please help me to convert from 5.0 to 2009
Please help me to convert from 5.0 to 2009
Source LabVIEW version: LabView 5.0
Target LabVIEW Version: LabView 9.0
Thank you so much..
Solved!
Go to Solution.
Attachments:
shutter.llb 255 KBLabVIEW 9.0
Attachments:
shutter.llb 90 KB -
My main notebook crushes and now I would like to sync my Ipod with annother notebook! So what ca I do? Please help me! Greetings from Austria
See Recover your iTunes library from your iPod or iOS device.
tt2 -
Safari has disappeared from screen can't access internet
Safari has disappeared from screen, can't access InternetInternet
Under Settings -> General -> Restrictions do you have a restriction on Safari?
-
i want to replace my front screen of 4S. Please help me to identify original screen with fakes?
Apple does not sell parts.
Either get the entire device replaced under Out of Warranty exchange or take your chances with non-oem parts. -
Please help 'Translate' These codes from AS2 to AS3 for me
Hi, i need help 'translating' these codes from Action Script 2 to Action Script 3. Please Do it for me:
toc loadText = new LoadVars();
loadText.load("Curie.txt");
loadText.onLoad = function(success) {
if (success) {
// trace(success);
Curie.html = true;
Curie.htmlText = this.Curie;
Please translate it for me, i need it ASAP thanks
KennethThank you for helping me
Kenneth
Date: Thu, 15 Oct 2009 05:49:14 -0600
From: [email protected]
To: [email protected]
Subject: Please help 'Translate' These codes from AS2 to AS3 for me
Take a look at that:
http://livedocs.adobe.com/flash/9.0/ActionScriptLangRefV3/migration.html
There is a LoadVars section on that.
There is also a tutorial here:
http://www.republicofcode.com/tutorials/flash/as3externaltext/
Cheers,
CaioToOn!
> -
PLEASE HELP!!! Black Screen with white curser at startup...
at startup after grey screen fan turns on and screen turns black with a white curser in the upper left. Then one line of text shows saying something to do with single user mode failed with a bunch of other text. (sorry I didn't write it down) It then vanishes for a minute with just the white curser remaining and repeats.
Ran hardware test... everything OK
I have repaired permissions which took almost an hour of CD.
I tried repairing disk failed " Invalid Key Length, volume check failed" twice.
I am currently running os off external backup HD.
I tried doing a archive and install but said I could not because the my os software(10.4.11) was newer than my original CD (10.4), is that correct?
I do not know what to do? Please help!!!!You will need to reinstall OS X, but you cannot do an Archive and Install until you repair the drive. See the following:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update. -
Mac Acting Erratically: Please help Safari iTunes Messing Up
Okay I have an Apple PowerBook G4 running Mac OS 10.3.9 Panther (purchased late Nov 2003 was originally running 10.2.8 Jaguar) and up till a few days ago everything was running smoothly. That is until after I upgraded to QuickTime 7.1.2 and installed iTunes 6.0.5 when the problem started. Somehow my login.keychain for Safari got corrupted and I tried deleting original and making a new one.
Here's what has happened since then:
Any free media I have downloaded like videos or music off free sites (without Digital Rights Management) already still work. However, if I try downloading new stuff the new files don't work.
Since day before yesterday 4 times when I open iTunes it tells me my Library has been damaged. All my music files are still on my hard drive and are still playable but my iTunes Library file is corrupted -- how and why I don't know.
No music appears in my Library nor do any of my videos in .m4v format (iPod format) show up in my Library since then. I trash damaged file and re-import or select add to library and re-add all the media to my Library seems to work fine. I play them and most of them are playable. Even when Library works a few that played earlier have a skipping problem.
In Safari all my bookmarks got deleted -- I had to back, find the websites and re-add them -- fortunately when I closed Safari and re-launched the browser they remained saved the next time I closed and re-started the browser. However, third time (normally when something doesn't work twice they say third time's the charm) well the third time I opened Safari everything got deleted again.
My iTunes Library is acting erratically -- files I download don't work although files I already have are still playable usually except when my programs run across errors that didn't exist earlier.
I have Microsoft Office X 10.1.6 with the PowerPoint X and Excel X Security Updates, the Apple Security Updates 2006-002, 2006-003 and QuickTime 7.1.2 and iTunes 6.0.5.
When I originally downloaded and installed Security Update 2006-001 my Safari completely broke and would stop running and my Dock Menu dissappeared until restart but even then Safari stopped working. Could find no other solution than reinstalling OS X to return my Mac to pre Security Update 2006-001 levels. Not even Disk Utility solved the problem.
iTunes 6.0.2 also caused problems for me (I heard it caused problems on Windows also) the problem on my Mac was Disk Utility stopped working altogether. Fortunately, by deleting the game Chess from my Mac it fixed the problem. Today, I have Chess back on my computer because since my last OS reinstall I just updated my iTunes to 6.0.3 (I think) I now have iTunes 6.0.5 and have had no problems with Chess and iTunes or iTunes and another application like Chess preventing Disk Utility from working -- but now this problem I am describing where my Library erases itself regularly -- sometimes I restart iTunes and the new user wizard shows up and asks if I want iTunes to find my media and automatically add it to my Library when it does I say yes and it re-adds everything but somehow I have 2 files for every song on my computer and it re-imports (or imports) all my music, videos and podcasts back into my Library once and then re-imporitng it again
This time Safari is working but bookmarks are being erased and re-erased, iTunes is acting all screwy, files I download don't work when they should, I tried deleting and re-downloading a video I had saved on my hard drive (that I downloaded earlier) and the exact same file (no changes had been made to the file when it was re-uploaded) had errors playing when the download completed.
Fortunately, I had burned the video to a CD so I can re-copy it to my Mac and when I play it off the CD on my Mac or copy directly to Mac and play it works just fine.
Since downloading these updates cannot download anything anymore without errors when playing them.
If I downloaded same files earlier though they would have worked.
Only as a last resort would I do a clean reinstall of OS X -- thing is it would take a lot of work just to reinstall OS X, copy all my files I have backed up back to my hard drive, re-importing my music and artwork, re-installing Microsoft Office X and its updates, reinstalling some (but not all the latest ones if neccessary) of Apple's Security Updates, reupdating to Mac OS 10.3.9 to reinstall QuickTime 7.
I had like 283 files in my iTunes Library, including all my music, videos, podcasts etc.
Imagine how long it would take to get them all back in there; and I re-did it last night until it got erased again. Don't want to re-do it unless next time it stays permanently.
Just a note I also have Virex 7 on my Mac -- and it used to be a startup item but somehow it got disabled from starting up.
Also, I do have VLC Media Player but even that has been having problems with playing newly downloaded media files since I updated my QuickTime.
So the problem now is with my iTunes Library erasing itself continuously and even when its working sometimes refusing to play an entire track (it starts playing a song and then skips to the next one) I've checked my preferences and cross shading or whatever its called is unselected but sound checker is on.
Also the problem involves my Safari erasing bookmarks on its own as described above. Please help anyway you can!
As a last resort will do a clean reinstall, re-copy all my files back to my hard drive, reinstall my programs, re-update my Mac carefully etc.Thanks for the help. I will take your advice and try running Disk Utility again. I have noticed sometimes when running Safari after quitting the application my defaults get changed -- that is my preferences go away. I have popup blocking and tabbed browing normally enabled by default it used to be if I enabled them as long as I didn't manually disable them that they would stay the same even after I quit and relaunch the browser, but now they get disabled when I quit and have to manually re-enable them again.
Also as noted bookmarks get deleted. Since the time I posted this thread I had at one time done a clean reinstall of OS X -- did it about 1-2 weeks ago. Not sure if videos I download on my Mac still have same problem but noticed if I download same videos on a PC that I used to download and play directly on my Mac that I could burn them to a CD or put them on a flash drive and transfer the file to Mac without any problems but downloading directly on Mac and then playing causes difficulty.
However, the same issue with Safari and iTunes has still been lingering for a while. I already have Mac OS 10.3.9 Combined Update installed should I try re-installing again? That would require me to reinstall OS X again and then update to 10.3.9. Or simply re-download and re-install 10.3.9 if possible over existing configuration so installing 10.3.9 over 10.3.9?
3 times out of 5 iTunes Music Library becomes damaged -- a few times I have tried since then deleting files in iTunes cache -- shouldn't become too big anyways -- otherwise it could become slow or something (good reason for cleaning Safari cache sometimes also) of course I wouldn't clean out the entire cache unless I had to or I thought that would fix the problem etc -- unless maybe it would even do a lot of good for resolving the problem.
I even tried trashing the damaged iTunes Library and the iTunes Music Library.xml file when the Library wasn't working.
If the problem re-occurs should I trash the iTunes preferences file(s) like iTunes.plist etc would help? -
PLEASE HELP ME! ( IMAC ERROR SCREEN AT START UP )
Hello everyone i have a massive problem that has been scaring me for the past months i have called applecare but they seem to not have the right answer i just hope that one of you people can help me.
i own a imac 27 inch 2011 model and just from couple of months ago i kept getting errors at the grey screen but before the error to appear a little grey screen scrolls from the top but anyway i cannot get a picture of it as my phone takes a while for the camera to appear but once my computer restarts itself ( because of the error ) a message pops up saying " Your computer was restarted because of a problem." i clicked on show details and everything you see below is exactly what is on the message pop up box ( please note that the stars indicate where the details of the error start and end )
*****START*****
Interval Since Last Panic Report: 148012 sec
Panics Since Last Report: 2
Anonymous UUID: DA9904ED-1814-4D1F-B45C-E4AB702C22BB
Tue Dec 20 17:12:29 2011
panic(cpu 4 caller 0xffffff80002c266d): Kernel trap at 0xffffff7f818f234b, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x0000004300000007, CR3: 0x000000002c4da020, CR4: 0x00000000000606e0
RAX: 0x0000004300000006, RBX: 0x0000000000000002, RCX: 0xffffff7f818f5922, RDX: 0xffffff80255ecd40
RSP: 0xffffff81c96cb9a0, RBP: 0xffffff81c96cb9f0, RSI: 0x000000008020690c, RDI: 0xffffff8026fee208
R8: 0x0000000000000000, R9: 0x000000000ffff084, R10: 0xfffffe800d0108b0, R11: 0x000000000001b6e0
R12: 0x0000000000000000, R13: 0x0000000000000000, R14: 0xffffff80253bbc30, R15: 0xffffff80251c60a8
RFL: 0x0000000000010282, RIP: 0xffffff7f818f234b, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0x0000004300000007, Error code: 0x0000000000000000, Faulting CPU: 0x4
Backtrace (CPU 4), Frame : Return Address
0xffffff81c96cb660 : 0xffffff8000220702
0xffffff81c96cb6e0 : 0xffffff80002c266d
0xffffff81c96cb880 : 0xffffff80002d7a1d
0xffffff81c96cb8a0 : 0xffffff7f818f234b
0xffffff81c96cb9f0 : 0xffffff7f818f59b1
0xffffff81c96cba30 : 0xffffff7f818f3a0e
0xffffff81c96cba70 : 0xffffff8000344787
0xffffff81c96cbac0 : 0xffffff800039ca0d
0xffffff81c96cbb30 : 0xffffff800039e213
0xffffff81c96cbcd0 : 0xffffff800033f4c7
0xffffff81c96cbda0 : 0xffffff800033f672
0xffffff81c96cbdd0 : 0xffffff8000563f3f
0xffffff81c96cbe10 : 0xffffff8000563fe0
0xffffff81c96cbe40 : 0xffffff8000531453
0xffffff81c96cbe70 : 0xffffff8000561124
0xffffff81c96cbf60 : 0xffffff80005ca468
0xffffff81c96cbfb0 : 0xffffff80002d7f39
Kernel Extensions in backtrace:
com.logmein.hamachi(1.0)[4F10A12D-34FD-ACB0-81FB-036809497AFC]@0xffffff7f818f10 00->0xffffff7f818f6fff
BSD process name corresponding to current thread: hamachid
Mac OS version:
11C74
Kernel version:
Darwin Kernel Version 11.2.0: Tue Aug 9 20:54:00 PDT 2011; root:xnu-1699.24.8~1/RELEASE_X86_64
Kernel UUID: 59275DFA-10C0-30B3-9E26-F7B5DFB1A432
System model name: iMac12,2 (Mac-942B59F58194171B)
System uptime in nanoseconds: 10498414190
last loaded kext at 9863914126: com.parallels.kext.prl_hypervisor 7.0 14920.689535 (addr 0xffffff7f818f9000, size 380928)
loaded kexts:
com.parallels.kext.prl_hypervisor 7.0 14920.689535
com.logmein.hamachi 1.0
com.parallels.kext.prl_usb_connect 7.0 14920.689535
com.apple.filesystems.autofs 3.0
com.apple.driver.AudioAUUC 1.59
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AppleMCCSControl 1.0.26
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.driver.AGPM 100.12.42
com.apple.driver.AppleMikeyDriver 2.1.3f7
com.apple.kext.ATIFramebuffer 7.1.4
com.apple.driver.AppleIntelHD3000Graphics 7.1.4
com.apple.driver.AppleHDA 2.1.3f7
com.apple.driver.AudioIPCDriver 1.2.1
com.apple.driver.AppleMuxControl 3.0.16
com.apple.ATIRadeonX3000 7.1.4
com.apple.driver.AppleBluetoothMultitouch 66.3
com.apple.driver.AppleSMCLMU 2.0.1d2
com.apple.driver.AirPort.Atheros40 501.58.1
com.apple.driver.ACPI_SMC_PlatformPlugin 4.7.5d4
com.apple.driver.AppleLPC 1.5.3
com.apple.driver.AppleBacklight 170.1.9
com.apple.driver.AppleIRController 312
com.apple.driver.AppleUSBCardReader 3.0.1
com.apple.iokit.SCSITaskUserClient 3.0.1
com.apple.driver.AppleUSBHub 4.5.0
com.apple.iokit.IOAHCIBlockStorage 2.0.1
com.apple.BootCache 33
com.apple.iokit.AppleBCM5701Ethernet 3.0.8b2
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.driver.AppleFWOHCI 4.8.9
com.apple.driver.AppleUSBEHCI 4.5.5
com.apple.driver.AppleAHCIPort 2.2.0
com.apple.driver.AppleEFINVRAM 1.5.0
com.apple.driver.AppleUSBUHCI 4.4.5
com.apple.driver.AppleACPIButtons 1.4
com.apple.driver.AppleRTC 1.4
com.apple.driver.AppleHPET 1.6
com.apple.driver.AppleSMBIOS 1.7
com.apple.driver.AppleACPIEC 1.4
com.apple.driver.AppleAPIC 1.5
com.apple.driver.AppleIntelCPUPowerManagementClient 167.1.0
com.apple.security.quarantine 1
com.apple.nke.applicationfirewall 3.2.30
com.apple.driver.AppleIntelCPUPowerManagement 167.1.0
com.apple.kext.triggers 1.0
com.apple.driver.AppleAVBAudio 1.0.0d11
com.apple.iokit.IOSurface 80.0
com.apple.iokit.IOBluetoothSerialManager 4.0.1f4
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.iokit.IOAVBFamily 1.0.0d22
com.apple.driver.AppleHDAHardwareConfigDriver 2.1.3f7
com.apple.driver.DspFuncLib 2.1.3f7
com.apple.iokit.IOAudioFamily 1.8.3fc11
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.driver.IOBluetoothHIDDriver 4.0.1f4
com.apple.driver.AppleMultitouchDriver 220.62.1
com.apple.iokit.IOFireWireIP 2.2.4
com.apple.driver.AppleHDAController 2.1.3f7
com.apple.iokit.IOHDAFamily 2.1.3f7
com.apple.driver.ApplePolicyControl 3.0.16
com.apple.driver.AppleGraphicsControl 3.0.16
com.apple.iokit.IO80211Family 411.1
com.apple.driver.AppleSMC 3.1.1d8
com.apple.driver.IOPlatformPluginFamily 4.7.5d4
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleBacklightExpert 1.0.3
com.apple.iokit.IONDRVSupport 2.3.2
com.apple.driver.AppleThunderboltEDMSink 1.1.3
com.apple.driver.AppleThunderboltEDMSource 1.1.3
com.apple.kext.ATI6000Controller 7.1.4
com.apple.kext.ATISupport 7.1.4
com.apple.driver.AppleIntelSNBGraphicsFB 7.1.4
com.apple.iokit.IOGraphicsFamily 2.3.2
com.apple.driver.AppleThunderboltDPOutAdapter 1.5.8
com.apple.driver.AppleThunderboltDPInAdapter 1.5.8
com.apple.driver.AppleThunderboltDPAdapterFamily 1.5.8
com.apple.driver.AppleThunderboltPCIDownAdapter 1.2.1
com.apple.driver.BroadcomUSBBluetoothHCIController 4.0.1f4
com.apple.driver.AppleUSBBluetoothHCIController 4.0.1f4
com.apple.iokit.IOBluetoothFamily 4.0.1f4
com.apple.iokit.IOUSBHIDDriver 4.4.5
com.apple.iokit.IOUSBMassStorageClass 3.0.0
com.apple.iokit.IOSCSIBlockCommandsDevice 3.0.1
com.apple.driver.AppleFileSystemDriver 13
com.apple.driver.AppleUSBMergeNub 4.5.3
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.driver.XsanFilter 403
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.0.1
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.7
com.apple.iokit.IOCDStorageFamily 1.7
com.apple.driver.AppleThunderboltNHI 1.3.2
com.apple.iokit.IOThunderboltFamily 1.7.4
com.apple.iokit.IOAHCISerialATAPI 2.0.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.0.1
com.apple.iokit.IOUSBUserClient 4.5.3
com.apple.iokit.IOEthernetAVBController 1.0.0d5
com.apple.iokit.IONetworkingFamily 2.0
com.apple.iokit.IOFireWireFamily 4.4.5
com.apple.iokit.IOAHCIFamily 2.0.7
com.apple.iokit.IOUSBFamily 4.5.5
com.apple.driver.AppleEFIRuntime 1.5.0
com.apple.iokit.IOHIDFamily 1.7.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.TMSafetyNet 7
com.apple.security.sandbox 165.3
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 331
com.apple.iokit.IOStorageFamily 1.7
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.4
com.apple.iokit.IOPCIFamily 2.6.7
com.apple.iokit.IOACPIFamily 1.4
Model: iMac12,2, BootROM IM121.0047.B1D, 4 processors, Intel Core i7, 3.4 GHz, 16 GB, SMC 1.72f2
Graphics: AMD Radeon HD 6970M, AMD Radeon HD 6970M, PCIe, 2048 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333531533642465238432D48392020
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333531533642465238432D48392020
Memory Module: BANK 0/DIMM1, 4 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333531533642465238432D48392020
Memory Module: BANK 1/DIMM1, 4 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333531533642465238432D48392020
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x9A), Atheros 9380: 4.0.58.4-P2P
Bluetooth: Version 4.0.1f4, 2 service, 18 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: ST32000541AS, 2 TB
Serial ATA Device: APPLE SSD TS256C, 251 GB
Serial ATA Device: OPTIARC DVD RW AD-5690H
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfd110000 / 4
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 3
USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x850b, 0xfa200000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: EyeTV Hybrid, 0x0fd9, 0x0018, 0xfa120000 / 5
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0xfa111000 / 6
*****END*****
please help me! any help will do! ANY!! ( if you are going to comment about restoring then please is there a way to stop it from deleting everything? because i have lots of important stuff on my imac)
Thanks for any help in advance.Ok,
Firstly, I reccomend starting your machine in Safe Boot, and seeing if it occurs again. You can do this by holding the shift key immediately as the machine starts up. If you notice that it never occurs in this mode, it is likely a temporary issue. You may like to backup, and then run a clean install of your OS. If the issue still occurs then follow the steps below.
Repair disk permissions. Open disk utility app, select Macintosh HD, and then repair permissions. Then go ahead and follow the following steps.
Check peripheral devices first
Skip this section if you have no peripheral devices.
Power off your Mac.
Disconnect all peripheral devices and Ethernet cables until all you have connected to your Mac is a display, keyboard, and mouse or trackpad.
Power on your Mac and start from the external hard disk.
Use the Apple applications on your external hard disk to surf the web, view QuickTime movies, email, print, scan, sync iOS devices, and other things. Continue using your Mac for the amount of time it would usually take for the kernel panic to occur.
If the kernel panic does not occur: Power down your Mac and connect one peripheral at a time; repeat the above steps until you find the peripheral causing your kernel panic.
If the kernel panic does occur: Proceed to check the internal RAM and third party hardware.
Check internal RAM and third-party hardware
Power off your Mac.
Reseat your Apple RAM, and remove third party RAM and third-party hardware. If you do not have the Apple RAM that came with your system, reseat the third-party RAM.
Power on your Mac and start from the external hard disk.
Use the Apple applications on your external hard disk to surf the web, view QuickTime movies, email, print, scan, sync iOS devices, and other things. Continue using your Mac for the amount of time it would usually take for the kernel panic to occur.
If the kernel panic does not occur: Your third-party RAM or internal third-party hardware may need to be replaced.
If a kernel panic does occur: Bring your Mac to a Genius at an Apple Store, or an Apple Authorized Service Provider for service and support. Be sure to ask that, if the hard disk needs reformatting or replacing, they contact you about escalating your case to a special data recovery service. If you plan to visit an Apple Retail store, make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).
Software troubleshooting
Reinstall Mac OS X v10.6 (or, for Mac OS X v10.5, perform an archive and install) on your internal hard disk.
Start from the internal hard disk.
Run Software Update.
Install all updates until Software Update reports "Your software is up to date."
Download and install any third-party software updates before reinstalling third-party software, especially drivers and kernel extensions.
Examples include:
Virtualization software – Parallels, VirtualBox and VMware
Drivers for display cards – ATI and nVIDIA
See if this helps, and get back to me,
Nathan -
Please Help Get a Color from Pixel !!!!
Is anybody know how to get a Color from pixel.
My program is not Full Screen .
So i think Robot.getPixelColor() don't suitable.
Please Help me!Robot.getPixelColor() will work fine, but the problem you will have is getting the mouse set to the correct location and getting your application to know where it is: you can do it with win32 calls and JNI. Here are a few that I have found helpful--they are in a VB format:
Public Const CLR_INVALID = &HFFFF 'not a valid pixel
Public Const MOUSE_MOVED = &H1
Public Const MOUSEEVENTF_ABSOLUTE = &H8000 ' absolute move
Public Const MOUSEEVENTF_LEFTDOWN = &H2 ' left button down
Public Const MOUSEEVENTF_LEFTUP = &H4 ' left button up
Public Const MOUSEEVENTF_RIGHTDOWN = &H8 ' right button down
Public Const MOUSEEVENTF_RIGHTUP = &H10 ' right button up
Public Const REQUEST_LEFT_CLICK = &H2D 'request left click "-"
Public Const REQUEST_RIGHT_CLICK = &H2B 'request right click "+"
Type POINTAPI
x As Long
y As Long
End Type
Type POINTSTRUCT
hwnd As Long
hdc As Long
ptAbsolute As POINTAPI
ptOrigin As POINTAPI
ptLocal As POINTAPI
ptColor As Long
sType As String
retMessage As Boolean
End Type
Declare Function GetCursorPos _
Lib "user32" (ByRef lpPoint As POINTAPI) _
As Long
Declare Function SetCursorPos _
Lib "user32" (ByVal x As Long, ByVal y As Long) _
As Long
Declare Sub mouse_event _
Lib "user32" (ByVal dwFlags As Long, _
ByVal dx As Long, _
ByVal dy As Long, _
ByVal cButtons As Long, _
ByVal dwExtraInfo As Long)
Declare Sub Sleep Lib "kernel32" (ByVal dwMilliseconds As Long)
Declare Function GetMessageExtraInfo Lib "user32" () As Long
Declare Function GetPixel Lib "gdi32" (ByVal hdc As Long, _
ByVal x As Long, _
ByVal y As Long) As Long
Declare Function WindowFromPoint Lib "user32" (ByVal xPoint As Long, _
ByVal yPoint As Long) As Long
Declare Function GetWindowDC Lib "user32" (ByVal hwnd As Long) As Long
Declare Function GetWindowOrgEx Lib "gdi32" (ByVal hdc As Long, _
ByRef lpPoint As POINTAPI) As Long -
Something went wrong om monday april 18th. After an update of i-tunes the foto's I took on my Iphone were gone as well as the video's and sms messages. Also Safari is gone. What to do? I tried to restore a backup; did not help......
Reinstall iTunes application.
Copy /Music/iTones/ folder from your backup you made before you wiped the computer, to /Music/ then open iTunes. -
Please help which link to follow ?
hello All,
I am trying to apply the applet caching mechanism to my applet. As with my company policy i am only allowed to use the
JRE 1.6.0_05 as the client side JRE.
Searching Sun's website i came up with these two links.
http://java.sun.com/javase/6/docs/technotes/guides/deployment/deployment-guide/applet-caching.html
http://java.sun.com/javase/6/docs/technotes/guides/plugin/developer_guide/applet_caching.html
I am totally confused so as to which link to use. Where can i read what technique is compatible with the JRE 1.6.0_05.
I know everywhere on sun website they are talking about JRE 6u10, but unfortunately until the corporate standards are set for it at my firm i cannot use it.
So can someone please help me to decide which options are available to me. As since the above links state different parameters for applet tag.
Please advise,
ThanksHello,
I understand the flexibility which web start provides.
But our project is almost completed and its more of an integration phase for the applet to other webpages.
So, disregarding the fact that WebStart is an option. Can you please advise the caching mechanism which i cam implement from links i posted. I have read applet caching has always been a buggy topic, but not sure if JRE 1.6.0_05 has improved on it or not?
Please advise,
Maybe you are looking for
-
Ringtones not showing up in my iTunes
The songs that I've downloaded that I know can be converted into ringtones are not showing up in the ringtone column in my iTunes (yes, I have 'show ringtones' selected in the 'view options' folder). When ringtones was first offered, everything worke
-
Hi i have a NOKIA 5800 express music handset , it came with a 90 days walk/drive navigation license , i want to know , what is the cost of buying / using the GPS service after the expiry of this 90 day license? thanks in advance.
-
what needs to be done to convert elapsedtime to HH:MM:SS thanks Pappan
-
ARP Cache Poison reported in Norton AntiVirus for Mac
The MAC address from my new gen Apple TV is being tagged from Norton Antivirus as sending an ARP Cache Poison. Anything to care about, folks?
-
This is a Tier 1 Support TEST post. Will be deleted.
HI all, this is a test post for spam training. Thank you.