Please help sap GuruSSSS
Hi Sap guru,
I want to Extract data from iw32. ( 5 Field)
it is possible in Excel.
In Excel i have bulk of service no.
i want to take data from iw32.
please help on that..........
Hi,
Please restructure your question and try giving some examples.
The question doesn't make sense.
Cheers, Scott
Similar Messages
-
Please Help.SAP BOBJ Requirement-WEBI
Hi Users,
I have a requirement from my client.
Current situation is that we have data load happening from flat files to R/3 Tables and then we Universe as SEMANTIC layer on these tables on which we have build WEBI reports.
Now Client wants to build Infocube and move all data from Z tables to Infocube and then directly connect cube to WEBI an build reports without universe as semantic layer anymore.
So the question is:
1. Will old reports be affected in any which ways? and what is the solution to avoid the impacts?
2. Will there be any problem if navigational attributes being used?
3. Can same hierarchies logic of objects and classes which were built at univers level be implemented at cube level?
3. any functionalities of universe which cannot be implemented at cube level?
Please suggest the impacts and what is best to do.
Regards
Syed
Edited by: Zabi_Zabi on Mar 9, 2012 8:12 AM
Edited by: Zabi_Zabi on Mar 9, 2012 8:28 AMHi,
So you are saying :
1) we have old reports which work well to r/3
2) we are going to create new reports based on bw
To answer your (1) - ??? if you are not touching the orginal report, universe, datasource etc - then NO of course not.
2. what problems are you expecting? maybe best to try.
3) hierarchies in BI4.0 direct connection will require a BEx Query . Hierarchies are modelled in RSH1 in BW.
4) delegate as much KF calculation to the Cube, delegate the most functonality to the BEx query, and use webi for presentation and formatting.
regards,
H -
Hi
Hello friends dnt u mind giving me few details about the
1)project prepration
2)busniess blue print
3)realisation
4)4final prepration
5)golive & support
Regards,
Vijay.Hi,
1. Project Preparation, in which the project team is identified and mobilized, the project standards are defined, and the project work environment is set up;
2. Blueprint, in which the business processes are defined and the business blueprint document is designed;
3. Realization, in which the system is configured, knowledge transfer occurs, extensive unit testing is completed, and data mappings and data requirements for migration are defined;
4. Final Preparation, in which final integration testing, stress testing, and conversion testing are conducted, and all end users are trained; and
5. Go-Live and Support, in which the data is migrated from the legacy systems, the new system is activated, and post-implementation support is provided.
Also : http://erpgenie.com/index.php?option=com_content&task=view&id=422&Itemid=112
Reward if helpful.
Regards,
Rashmi -
Excel Download of a Web SAP BW Report asks userid and password.please help
Dear BW folks,
Issue: When I run a specific SAP BW Report from Web and download the same into excel & csv.
When I open the excel file downloaded, it asks me user name and password to enter. csv file downloaded doesn't ask.
The report has 0cust_sales hierarchy and SBU hierarchy.
Is there any thing to do with these hierarchies that the excel download is asking user name and password?
Please help me out!!!!! This report needs to be downloaded into excel sent to my manager.....
Regards
PavanHi Pavan
It is possible,please refer the below link
Report execution without prompting user id
Providing un-secured access to a web report.
Also, for the time being, you can run the query and save a workbook and sent across
These will resolve the issue
Thanks
Pavan Agarwal -
Sir, We have around 500 items as Insurance Spares in the stores. These spares are checked once in 6 months for their healthiness, storage, etc with a special checklist. We want this checklist an schedule in SAP ( MM). How to do it? Please help.We are presently doing it as similar to PM schedule ( PM module) but want it in MM module.
Hi Prerna
Please refer the this doc ...it might help you
http://www.erptips.com/Samples/ERPtips-SAP-Training-Manual-SAMPLE-CHAPTER-from-Basic-Quality-Management.pdf
and kindly update the status if it works or not
Regards
Partha -
search criteria is not working in Responsible Group field in sap crm could you please help me this how to achieve.I have writen code on EH_ONSEARCH .as per below...what changess i need to do..and through partner function and adding the selection params please send the sample .
code. partner funtction - ZRG DATA :
DATA : lv_partner_fct type .
types: begin of ty_resp,
partner type but000-partner,
name_last type but000-name_last,
name_first type but000-name_first,
mc_name1 type but000-mc_name1,
mc_name2 type but000-mc_name2,
end of ty_resp.
DATA: lv_resp_bp type STANDARD TABLE OF ty_resp INITIAL SIZE 0,
lw_resp_bp type ty_resp.
IF lv_attr_name = 'Rgroup'.
lr_entity->get_property_as_value( EXPORTING iv_attr_name = if_crm_srqm_uiu_const=>gc_attr_low
IMPORTING ev_result = lv_low ).
IF lv_low IS INITIAL.
SELECT partner
name_last
name_first
mc_name1
mc_name2
FROM but000 INTO table lv_resp_bp
WHERE mc_name2 = lv_low and bu_group = '0010'.
loop at lv_resp_bp into lw_resp_bp.
lv_low = lw_resp_bp-mc_name2.
lr_query_service2->add_selection_param( iv_attr_name = 'Rgroup'
iv_sign = lv_sign
iv_option = lv_option
iv_low = lv_low
iv_high = lv_high ).
ENDLOOP.
if lv_partner_fct = 'ZRG'.
lr_entity = lr_iterator->get_next( ).
CONTINUE.
ENDIF.
lv_attr_name = 'BU_PARTNER'.
ENDIF.<b>You can acheive this .... first by creating the search help exit ... by creating the maintaince view then using it in the Creation of the search help </b> ...
see the link for attaching the view to the serach help .
<a href="http://">http://www.sapdevelopment.co.uk/dictionary/shelp/shelp_elementary.htm</a>
reward points if it is usefull...
Girish -
SAP R/3 issue- Please Help
Hi All,
Please help in making suggestions on an R/3 issue. The Problem is we have a standard cube 0PUR_C08 (Purchase Order Item Service Level). Could you please suggest the appropriate ODS and Standard Datasources required to load data into the target cube.
If possible , please suggest which are the most appropriate R/3 standard tablesHi,
ODS 0PUR_O01 used to load data to cube 0PUR_C08 and the following 4 DS's are used depends on the requierements
2LIS_02_ITM Purchase Order Items
2LIS_02_SGR Allocation Schedule Line with Goods Receipt
2LIS_02_CGR Allocation Confirmation with Goods Receipt
2LIS_02_SCN Allocation Schedule Line with Confirmation
Refer the below link for more info.,
http://help.sap.com/saphelp_nw04/helpdata/en/77/5c27cf43b290408efe91148095d7ff/content.htm
Regs,
VACHAN -
Please help for using perform in SAP script
As subject.
My sap script code as below:
/: PERFORM GET_CHAMT_DATE IN PROGRAM ZRAP004
/:USING &SPELL-WORD&
/:CHANGING &SPELL-WORD&
/:ENDPERFORM
My program ZRAP004 code as below:
FORM get_chamt_date USING u_iword TYPE spell-word
CHANGING u_oword TYPE spell-word.
CONCATENATE u_iword '元整'(t01) INTO u_oword.
endform.
This form is for check printing.
It's by standard function 'F110' to excute check printing.
But when i finished this transaction. System return error message as below:
<b>This routine contains 2 formal parameters, but the current call
contains 4 actual parameters.</b>
Please help. Thanks a lot!!Hiii
PERFORM CDE_CENT IN PROGRAM ZKRPMM_PERFORM_Z1MEDRUCK
/:USING &EKKO-EBELN&
/:CHANGING &CDECENT&
/:ENDPERFORM
The report :
REPORT zkrpmm_perform_z1medruck .
DATA : BEGIN OF it_input_table OCCURS 10.
INCLUDE STRUCTURE itcsy.
DATA : END OF it_input_table.
déclaration de la table output_table contenant les
variables exportées
DATA : BEGIN OF it_output_table OCCURS 0.
INCLUDE STRUCTURE itcsy.
DATA : END OF it_output_table.
DATA : w_ebeln LIKE ekko-ebeln,
w_vbeln LIKE vbak-vbeln,
w_zcdffa LIKE vbak-zcdffa.
FORM CDE_CENT
FORM cde_cent TABLES input output.
it_input_table[] = input[].
it_output_table[] = output[].
READ TABLE it_input_table INDEX 1.
MOVE it_input_table-value TO w_ebeln.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = w_ebeln
IMPORTING
output = w_ebeln.
SELECT SINGLE zcdffa FROM ekko
INTO w_zcdffa
WHERE ebeln = w_ebeln.
it_output_table-name = 'CDECENT'.
MOVE w_zcdffa TO it_output_table-value.
MODIFY it_output_table INDEX 1.
output[] = it_output_table[].
ENDFORM. -
Hi All,
I hope someone could help me out in selecting an appropriate in SAP for me.
I have done my B.Tech(Computer science and Engg) and have 3 yrs experience in Development in .net PLATFORM. But currently I am planning to change my career to SAP and so I have done my research in the SAP modules,as per my previous background I could see that BI,HANA, MM, SD, ABAP, BASIC and if something is missing please let me know as the best modules for the long term career and please also help- me in saying the best suitable module requirement and in the future i can have growth.
SO could anyone suggest me which module is best for the career and have good job opportunities in the market to settle down.
Please help me to select the module.
Thank youThank you Everyone for helping me diverting into SAP , actually as i have experience in .net technologies in development , please help me in diverting into nor coding part and i am interested into sap consultant .so please help me ...as i am interested going for B.I..
Is SAP BI the correct module for me and is it recommended to get settled in this module and for future also .
Please help me ..
Regards ,
Bharat. -
Hello All,
Am trying to execute the first sample assignment which is given on http://service.sap.com/connectors site.
Am using .NET Connector 2.0.1 instead of .NET Connector 1.0
Have followed all the steps as mentioned in the tutor but am getting this error:
" <b>SAP.Connector.RfcException: Missing R3NAME=... or ASHOST=... in connect_param in RfcOpenEx at SAP.Connector.Connection.Open() at SAP.Connector.SAPLoginProvider.OpenSAPConnection(Page p, String connstr, Boolean persist) at Test_RFC1.SAPLogin1.Login_Click(Object sender, EventArgs e) in c:\inetpub\wwwroot\test_rfc1\saplogin1.aspx.cs:line 97</b> "
As mentioned in the tutor we need to just mention the Applciation Host & System Number in the destination object & its configured under Custom Setting & not under SAPLOGON.INI.
To resolve this problem, I tried entering the MsgServerHost & SAPSystemName as well but am still getting the same error.
Please help.....
Awaiting Reply.
Thanks and Warm Regards,
RituIt seems that you have configured your destinaton1 to use "10.10.18.204" as Message Server and "PUBLIC" as logon group. The message server answers: "Group PUBLIC not found".
Please check the load balancing settings of your SAP system if it supports load balancing at all and what groups exist.
If "destination1" is a SAPLogonDestination, please check if the corresponding destination in SAPLOGON works. -
SAP certification question please help
Hi all;
I am angeline, I would like to take exam for SAP BASIS NW 7.0, I am reading some SAP BOOKS like
ADM505 ADM506 - Database Administration Oracle
TADM10_1_2008
TADM10_2_2008
TADM-12-1-2008
TADM-12-2-2008
i am not sure where may i start to read is that sequence is ok? is these books are enough for clear exam?, how can i find out some exam transcender like Microsoft MCSE has
please help me out and tell me easy way to clear that exam and how many papers are coverd ?
thanks
and waiting for your good responseHi,
You may try checking these links
SAP teched Bangalore offers below for professional level.
[Link|P_ADM_SYS_70: SAP Certified Technology Professional - Platform Technology with SAP NetWeaver 7.0]
Remaining all on Associate level.
You can get all the information from below site
[Link|http://www12.sap.com/services/education/certification/certificationfinder.epx#]
Regards
Uday -
Should i Start with SAP SD...Experts please help
HI,
I have 7+ experience in Channel and Direct sales of IT products.
I work for a company who is fortune 100 and only global distributor of IT products having presence in 6 Continents.
I am Exploring SAP as my career path as i am planning to work overseas and this is not possible having only Sales experience.
Please help as I am in dillemma to look SAP as my career path and invest approx 4-5 lacs in it.
I would also have to take a loan for it.
Please advice.
ThanxHi
This thing has been discussed many times. This is not advisable that you take loan for starting your career in SAP until and unless you have hundred percent job surety which is almost impossible. You have to sacrifice your prior non IT related experience. When you start career in SAP you start from scratch. Please check this blog where I have shared some tips and my personal experience as well. There are also many other blogs and threads in Career Center which can go through. This query was supposed to be posted in career forum and now some moderator can move it there. You'll get better responses from there.
Five key factors and basic tips for SAP consultant.
Thank$ -
Please help me to download files in sap netweaver?
Hi all!
i'm working with IBM maximo and sap netweaver integration. I need to import 2 files in Netweaver. I''m not good in sap so please tell me how to do this step by step.
this text from guide for integration this two systems----
""You must import the external files of the integration to your SAP client
development system. These files contain all ABAP programs and dictionary
objects that are needed for the integration.
Files that are exported from SAP have consecutive numbers. For example,
K900030.D04 might be the base installation transport file and K900036.D04
might be the fixpack 1 transport file"".
i've alreade cope files to :\usr\sap\trans\data\
then i need to import it in sap, but how to do this i don't know, i know that i need to organize transport request then import it, but how to do this i don't know/
please help me/Artyom
Subhash has listed exactly what you need.
Since you say that you are u201Cnot good in sapu201D, I wanted to clarify.
Only the R file (R900030.D04) needs to be copied to the ../data directory.
Only the K file (K900030.D04 needs to be copied to the ../cofiles directory.
(Copying both files to both directories will work as well.)
The request would be added to the STMS queue as:
D04K900030
Hope this helps.
PJ -
Starting SAP XI........Please Help
Hello All,
I am new to SAP XI.
i would appreciate if you please help me understand the starting point of SAP XI so that i can start working on the same.
i have read notes on help pages, but i am still confused.
Please guide me.
Awaiting Reply.
Thanks and regards,
SantoshHi Santosh,
<b>Welcome to XI.</b>
You can get lots of help from the following links
http://help.sap.com/saphelp_nw04/helpdata/en/e1/8e51341a06084de10000009b38f83b/frameset.htm
SAP XI - Where to Find Information
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/sap xi - where to find information.pdf
Following is the link for <i>'how to guides'</i>, A step by step guide to create scenarios:
https://websmp201.sap-ag.de/nw-howtoguides
All the information you need in XI :
http://help.sap.com/saphelp_nw04/helpdata/en/0f/80243b4a66ae0ce10000000a11402f/frameset.htm
you can also go through the url for Elearning :
https://www.sdn.sap.com/sdn/elearning.sdn
To understand the architecture of XI, Please go through this link,
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
XI is all about configuration of Adapters, to learn more please go through this link:
http://help.sap.com/saphelp_nw04/helpdata/en/0d/5ab43b274a960de10000000a114084/frameset.htm
One of the most powerful feature of XI, Business Process Management:
http://help.sap.com/saphelp_nw04/helpdata/en/3c/831620a4f1044dba38b370f77835cc/frameset.htm
Once you go through these links and are a bit aware what all XI objects do, you can try a simple "File to File Scenario" which would help you to understand XI objects in a much better manner.
For help on this scenario go through this blog it is in two parts thus i am providing both links below:
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
I hope if it helps, you'll give me points.
Thanks & Regards
Varun Joshi -
If i want to learn unix-HP for SAP at first stage, please help me.
Dear Friend,
If i want to learn unix-HP for SAP at first stage, please help me.
Thanks,
Regards,
sachinHi Sachin,
please go thru the following url
http://www.uga.edu/~ucns/wsg/unix/gstart/
and
http://whitepapers.techrepublic.com.com/whitepaper.aspx?&docid=10197&promo=100511
happy learning!
with BR,
Raj
<i> award points, plz </i>
Maybe you are looking for
-
Editing iPhone video without loss of quality
I've a stack of video clips taken from my iPhone 3GS which I want to simply stitch together and edit down a little WITHOUT loss of quality. All I want to do is import, crop and stitch them together, thus create a single file *with no change in image
-
HP PSC 2170 driver in Print & Faxing list
Hello, I have an HP PSC 2170 All in One printer. I cannot locate the drivers when I try to install the printer as an IP Printer. If I discover it manually as an IP Printer (put in the IP Address) the printer and drivers are found but the print jobs a
-
TS1702 how do i transfer apps from iphone 3 to iphone 4?
how do i transfer apps from the iphone 3 to iphone 4? example: notes app.
-
6.1.3 is already out. Will this be changed in a point-release update to 6.1? My question is related to this KB article: http://support.apple.com/kb/TS4550?viewlocale=en_US&locale=en_US
-
Why did you take away the feuatre that allowed me to save several tabbs when i close the webbrowser?