Please HELP: save workbook with initial selection variables
Hey folks,
I'm very frustrated.
I'd like to save a workbook without results and without any historical values in popup selection screen, but I'm not able to do.
Does anyone knows an answer?
I tried a lot, but haven't got any idea anymore.
PLEASE HELP.
I'm using the new SAP-BI 7.0 FrontEnd BEx-Analyzer.
Hope you can help as soon as possible.
Thanks in advance.
Nico
hey ottoman,
I didn't get the last tip.
Edit the variable I'm using and goto default tab?
The possible variables are shown if I refresh and they were shown in a popup, where I can select the parameters. But if I clear the the results and want to run, an error occured, because it's an obligatory variable.
As an alternative I tried to cancel. After it my workbook is cleared, but my formats are blown away
That's why I haven't got any solution to save the workbook with an initial selection popup.
Hope you have another idea?
Thanks.
Nico
Similar Messages
-
Please help me out with some fundamentals in BW
Hello,
Please guide me regarding the below mentioned questions.
1. what is the key date in query designer.
2. when do we perform attribute change run
like once the master data is loaded then we perform attribute change run and load the transactional data ?
3.what is the disadvantage of using aggregates.
4. what is full repair options?
please help me out with these questionsHI,
Repair full request :
If you indicate a request in full update mode as a repair request, then it is able to be updated in all data targets. This is also true if they already contain data from initial runs or deltas for this DataSource / source system combination, and they have overlapping selections.
Consequently, a repair request can be updated at any time without checking each ODS object. The system supports loading in an ODS object by using the repair request without having to check the data for overlapping or request sequencing. This is because you can also delete selectively without checking an ODS object.
Posting such requests can lead to duplicate data records in the data target.
Hierarchy/attribute change run after loading master data;
When hierarchies or attributes of characteristics change, the aggregate affected by the change can be adjusted manually or calculated automatically in process chains.
Aggregates:
Aggregates are materialized, pre-aggregated views on InfoCube fact table data. They are independent structures where summary data is stored within separate transparent InfoCubes. The purpose of aggregates is purely to accelerate the response time of queries by reducing the amount of data that must be read in the database for a given query navigation step. In the best case, the records presented in the report will exactly match the records that were read from the database.
Aggregates can only be defined on basic InfoCubes for dimension characteristics, navigational attributes (time-dependent and time-independent) and on hierarchy levels (for time-dependent and time-independent hierarchy structures). Aggregates may not be created on ODS objects, MultiProviders or Remote Cubes.
Queries may be automatically split up into several subqueries, e.g for individual restricted key figures (restricted key figures sales 2001 and sales 2002). Each subquery can use one aggregate; hence, one query can involve several aggregates.
If an aggregate has less than 15 components, BW 3.x puts each component automatically into a separate dimension that will be marked as line item (except package and unit dimension); these aggregates are called flat aggregates. Hence, dimension tables are omitted and SID tables referenced directly. Flat aggregates can be rolled up on the DB server (i.e., without loading data into the application server). This accelerates the roll up (hence the upload) process.
Disadvantage : The more aggregates exist, the more time-consuming is the roll-up process and thus the data loading process; the change run is also affected.
Hope this info Helps.
Thanks,Ramoji. -
My iPhone 6 ear speaker is not working properly I couldn't able to hear any thing from ear speaker to listen I had to put on loud speaker or to use hands free please help me out with this problem if some body have answer?
Hi Venkata from NZ,
If you are having an issue with the speaker on your iPhone, I would suggest that you troubleshoot using the steps in this article -
If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support
Thanks for using Apple Support Communities.
Best,
Brett L -
HT4972 the apps weve downloaded are not working. please help, extremely frustrated with our ipod 4
the apps we have downloaded are not working, please help, extremely frustrated with our ipod 4
See my previous reply for for the apps closing.
For the wifi problem:
Does the iOS device connect to other networks?
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect OK before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
firefox is not able to load any websites... i tried everything given in the support forum under the topic firefox is not able to load any websites but other programs can.. but still i am facing the same problem. so please help me out with this issue!!
firefox is not able to load any websites... i tried everything given in the support forum under the topic firefox is not able to load any websites but other programs can.. but still i am facing the same problem. so please help me out with this issue!!
-
Please help me out with the function code of print option in module pool
please help me out with the function code of print option in module pool, along with CASE condition.
regards,
asifHi
you can use the Function module
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
destination = 'LP01' "'Printer name
list_name = 'TEST'
list_text = 'SUBMIT ... TO SAP-SPOOL'
immediately = ' '
line_size = '2000'
no_dialog = 'X' "pass space to Pop screen for Print option
IMPORTING
out_parameters = wa_pri_params
valid = w_valid.
"next call below things
NEW-PAGE PRINT ON NO DIALOG PARAMETERS wa_pri_params.
"and try to Print the values inside the new-page
NEW-PAGE PRINT OFF.
Prabhudas -
How to access the activities created by an end user especially when the end user has left the organization?Please help me out with the possible solution
Hi Ramesh,
In the web UI we have business role IC_manger where you can search the activities based on employee responsible and you can use business transaction assignment functionality to assign those activities to any other end user or team.
Else you can also use Agent inbox functionality if you have configure the agent inbox for those activity.
Hope this helps solving your query -
My apple account is disabled, please help me deal with as soon as possible!
My apple account is disabled, please help me deal with as soon as possible!
Change the password, but did not receive the letter to change the password
-
CAN SOMEONE PLEASE HELP ME IN CREATING A TEXT VARIABLE???
Hello Friends,
I want to display the Key and Text for 0CALYEAR in a report. I searched the forum and it seems that for doing this I need to create a text variable. In the query designer I tried creating a text variable for 0CALYEAR, but in the variable wizard, the "Type of characteristic" drop-down is greyed out. Please guide me in creating a text variable and on a larger scale in getting the Key and Text for 0CALYEAR. Thanks!
Regards,
Prem.Hello Friends,
Thanks a lot for your replies!!! I am really delighted to see the helping spirit of the forum. I have assigned points to all of you. Thanks again!
Now coming to the issue. Let me reply individually. (Friends, reply may be a bit lengthy. Please read atleast your part fully).
Venkat, you said that we can display the key and text for 0CALYEAR if the texts are mainted for it. However, in the display option for 0CALYEAR there is no option for text. Moreover, since 0CALYEAR is provided by SAP itself, I did not find any option for maintaining texts for it. Infact in 0CALYEAR, under the master data tab the "With texts" option is unchecked. Please share some info on this one.
Srini, your suggessted solution was not possible as there was no option for displying text in the context menu for 0CALYEAR.
Karthik, I tried your solution. In my KeyFigures structure I have only two key figures and the 0CALYEAR is in rows. What I did was I right-clicked on "Key Figures" and clicked on New Selection. In the popup screen there is a button for variables. Clicking on it and then clicking on the "New" opton in the subsequent window brought me to the variable creation wizard. Interestingly this is a text variable creation wizard. Happily I created a text variable with replacement path and selected 0CALYEAR as the characteristic. Then I selected "Name(text)" for "Replace variable with" option. Everything went fine. Under key figures, I got an icon which is having a green triangle with a matrix cube (Apologies for explaning the situation like this :-). This is essentially the icon for characteristics. The description reads "&ZTXTVAR& New Selection". Now when I try to run the report I get an error saying "Use a Key Figure everywhere in the structure 'Keyfigures' ". I think the text variable is not getting created, instead a New selection is getting created. Please assist. Thanks!
Regards,
Prem. -
Please help Dreamweaver Rookie with Templates
Hi Everyone,
As stated in the title I am a Dreamweaver rookie.
I am creating 4 new websites, each with a different URL for my company.
I downloaded a pre-made template off of Adobe and added a few things, customized the colors and graphics and got it right where I want it.
I had hoped to copy this template with the intention of using it for the other 3 websites with the intention of keeping the nav bar the same for all 4 websites, so I changed all the graphics(header, footer, and main container images) to create the new website, changed the content on the page, saved it as a template with a new name to my same template folder in the root folder created for the site.
Unfortunately when I changed the graphics it also changed the graphics on my original page (but not the content)
So, I went back to the original page, restored the graphics to where they were and it's changing the new template as well.
I have tried saving the template as an HTML page and it didn't work, still changes both pages.
So, here's my question, how do I do this, I want to be able to dupicate this template, keep all the nav the same, keep all the formatting but be able to change the graphics from page to page. Please help!
Thanks
MikeHi,
I'm still having the same issue,
I created a new root folder for the new site and defined the new site withing dreaweaver using this root folder.
I copied the template that I want to use out of it's existing root folder, and pasted and renamed it into the new site root folder.
I am trying to change the banner conatiner background image. I am doing this by clicking on "CSS" then opening the dialog box for "Banner Area Container". I click on background, select the image I want, click ok and close the dialog box.
I then go to File, save and close the template.
Somehow it's still changing the template in the other root folder for the original site.
Help! -
Please help me understand making and loading variable classes
Hi guys ,
I know that I am stupid but I just can't get this! AS3 says you need to load variables into a class? Please please give me a simple example
my variables look like this... (the whole point of playing around with variables was that if I had to make a change I could access one place and change them...
but now I realse that I can't access or call them outside the movie clip they are in:(
please hlep me!
var ans1="";
var ans2="";
var w1="ABN";
var def1="An ABN (Australian Business Number), is a personal number for your business that makes it easier and quicker to deal with government and other businesses.";
var w2="ACN";
var def2="An ACN is an Australian Company Number, which is a special number that each company gets to identify it. No two companies can have the same ACN";
var w3="Action Plan";
var def3="A business Action Plan will show What needs to be done and When it needs to be done by."
var w4="Advertising";
var def4="Advertising is producing information to let people know about your business and try to increase sales."
var w5="Promotions";
var def5="Promotions are where your business tries to increase the sales of a particular item through offering a good deal, advertising or a special display.";
var w6="Benefit";
var def6="A benefit is something good that you get. One benefit of doing exercise is getting fit, another benefit is losing weight.";
var w7="Business Mentor";
var def7="A business mentor is a trusted guide. Someone who has experience and has been successful in business and can help and advise you.";
var w8="Business Name";
var def8="A Business name is the name a business uses to do its work. It lets customers know who you are.";
var w9="Business Registration";
var def9="When you start a business you need to register your ABN, you may need to register your business name.";
var w10="Cash flow";
var def10="Cash Flow for a business is having enough cash saved to be able to pay your bills when they are due.";
var w11="Characteristic";
var def11="The characteristics of something are describing words about that thing.";
var w12="Charges";
var def12="A charge is something you have to pay, an expense.";
var w13="Company";
var def13="Is the same as a corporation. A company is a type of business that needs to be registered (either State or Federal) and has special legal status. A company can put Pty. Ltd after it’s business name.";
var w14="Competitor";
var def14="A competitor is another business that is challenging you for customers.";
var w15="Constitution";
var def15="A constitution in business is a list of rules and principles that a company has agreed to follow.";
var w16="Corporations Aboriginal and Torres Strait Islander Act";
var def16="In the 1960s and 1970s, various reviews advised the Australian Government of the need for legislation to make it easier for Indigenous communities and organisations to form corporations. As a result, the ACA Act was passed, allowing Aboriginal and Torres Strait Islander groups to form corporations for any social or economic purpose.";
var w17="Corporations Act";
var def17="The Australian Securities and Investments Commission (ASIC) have laws that apply to corporations and these are found in the Corporations Act.";
var w18="Cultural knowledge";
var def18="Cultural knowledge is special information that is held by a particular cultural group, this could include technologies (e.g. special ways of using materials, making and using tools), stories, language and song, cultural rules, taboos, regulations and oral history.";
var w19="Customer";
var def19="The customer is someone who is buying something from a business.";
var w20="Debt";
var def20="Is something that you have to pay back. If you borrow 20 dollars you have a $20 debt.";
var w21="Direct competitor";
var def21="Is selling exactly the same thing as your business and competing for your customers.";
var w22="Dividend";
var def22="A dividend is money that is paid to shareholders regularly out of the company’s profits.";
var w23="(Microsoft) Excel";
var def23="Microsoft Excel is a computer program that lets you keep lists of numbers and also add up totals and do other sums to those numbers.";
var w24="Fees";
var def24="A fee is something that you have to pay, an expense.";
var w25="Financial Management";
var def25="Financial Management is the planning, organising, checking and controlling of the income, expenses and Tax for a business.";
var w26="Franchise";
var def26="A franchise is a type of business you can buy. When you buy a franchise you set up the same type of business that has been successful somewhere else.";
var w27="General ledger";
var def27="A general ledger for a business is where all of the income and expenses for that business are kept in a document.";
var w28="Goal";
var def28="A goal is a target that you set yourself or your business. Something that you want to achieve.";
var w29="Growth opportunity";
var def29="A growth opportunity is a chance for a business to get bigger.";
var w30="GST";
var def30="The Goods and Services Tax is paid when you buy things. Some items like food and medicine do not have the Goods and Services tax charged to them.";
var w31="ICN";
var def31="Indigenous Corporations Number is a special number given each indigenous corporation to identify it. No two indigenous corporations can have the same ICN.";
var w32="Incorporate";
var def32="Incorporate is what people do when they create a company or corporation.";
var w33="Indirect competitor";
var def33="An indirect competitor is selling a similar product or service to your business. E.g. If you had a pizza shop, a fried chicken shop is an indirect competitor because it sells food and your customers might want to eat chicken instead of pizza.";
var w34="Labour";
var def34="Labour is all the work done by people (including you) in your business.";
var w35="Legal name";
var def35="Your Legal Name is the name that is on your Birth Certificate.";
var w36="Legal protection";
var def36="Legal protection means you are protected under the law from certain things happening.";
var w37="Legal structure (business)";
var def37="Legal structure is the type of business, sole trader, company, partnership.";
var w38="Liability";
var def38="A liability is something you are responsible for.";
var w39="Licence";
var def39="A license is proof that you have permission to do something. For example, if you have a driving license you can drive a car.";
var w40="Lodge";
var def40="To lodge a form means to send it to where it has to go.";
var w41="Manufacturing";
var def41="A manufacturing business makes things.";
var w42="Marketing budget";
var def42="A marketing budget is the amount of money you have set aside for advertising and promotion for your business.";
var w43="Minor criminal convictions";
var def43="A minor criminal conviction is something small you have been in trouble over with the police. Shop lifting is an example of a minor criminal conviction. ";
var w44="MYOB";
var def44="MYOB is financial management software for business.";
var w45="Networks";
var def45="A network for business is all of your contacts, customers and the people you know through doing business. ";
var w46="Obligations";
var def46="Obligations are things you are responsible for.";
var w47="One off";
var def47="A “one off” cost is something that only needs to be paid for once.";
var w48="Operating budget";
var def48="The Operating Budget is a record of the income and expenses of a business.";
var w49="Overheads";
var def49="Overheads are the expenses or costs in running your business, the things you have to pay for.";
var w50="Partnership";
var def50="A partnership is where two or more people own and run a business.";
var w51="Permission";
var def51="Permission is where you ask if you can do something. If you ask and the person, group or council and they say yes, you have permission.";
var w52="Permit";
var def52="A permit is a special license or permission to do something";
var w53="Personal assets";
var def53="Personal assets are things that you own, like your car, house and furniture.";
var w54="Personal protection";
var def54="Being part of a company offers the shareholders some personal protection from legal and debt liabilities. This means that they have less responsibility than a Sole trader.";
var w55="Photo identification";
var def55="Photo Identification is a document that shows who you are and has your photo on it, like a Driver’s License, 18+ card or a passport.";
var w56="Postal address";
var def56="Your postal address is the address where you get your mail sent. It might be different to the address where you live.";
var w57="Pricing structure";
var def57="Pricing structure is where prices for something can change depending on how much the customer orders. The bigger the order the cheaper the price becomes.";
var w58="Private";
var def58="Private means not part of government.";
var w59="Profitable";
var def59="Profitable means that there is money left over after a business pays for all of its expenses out of the money it has made.";
var w60="Promote";
var def60="When you promote something you try to advertise or increase the amount of people who know about it.";
var w61="Public liability insurance";
var def61="Public Liability Insurance gives legal protection to the business owner against getting sued by a member of the public for things like injury or property damage. ";
var w62="Quickbooks";
var def62="Quickbooks is financial management software for business. ";
var w63="Registered";
var def63="Registered means that you have recorded your information on an official list. You register your car to be able to drive it on the road.";
var w64="Regulations";
var def64="Regulations are rules or laws that control what you can and can’t do.";
var w65="Retail";
var def65="Retail is where things get sold in small amounts to customers. Retail usually happens in a shop and the prices are higher.";
var w66="Service";
var def66="A Service business provides a service, like lawn mowing or accounting services.";
var w67="Shareholders";
var def67="Shareholders are people that own part of a company.";
var w68="Sole trader";
var def68="A sole trader is where one person owns and runs a business.";
var w69="Start up budget";
var def69="A Start Up Budget is the first Budget that gets done for a starting business and includes all of the costs involved in setting up the business.";
var w70="strategy";
var def70="A strategy in business is a plan of attack, or a plan of how to get something done.";
var w71="system";
var def71="A system is business is a set of detailed plans and rules for how to do something in your business.";
var w72="Vision";
var def72="Vision in business is being able to imagine and see something in the future. To set up a new business you need to be able to see something new that wasn’t there before.";
var w73="Wholesale";
var def73="Wholesale is where things get sold in large amounts, usually for a cheaper price. The Wholesale price. A wholesaler is usually a big shed where goods are stored. Wholesale is not usually available to just anyone.";no, that's not a reason you would use a class file.
anyway, your document class variables are defined on the main timeline so to reference them from any timeline you can use:
MovieClip(root).w36; // for example (but it's really undesirable to have coding in more than one timeline) -
Please help: deploy Bean with "No resource available" error for M:N relationship
Hi all,
I wonder any one comes across with deploying beans with M:N relationship with
"No resource available".
I defined the relationship in ejb-jar.xml and dbms in the
weblogic-cmp-rdbms-jar.xml, but when I deployed the beans I got
the following error
------ Error message-----
weblogic.common.ResourceException: No resources available at weblogic.common.internal.ResourceAllocator.reserve(ResourceAllocator.
java:568) at weblogic.common.internal.ResourceAllocator.reserve(ResourceAllocator.
java:400) at weblogic.common.internal.ResourceAllocator.reserveNoWait(ResourceAllo
cator.java:368) at weblogic.jdbc.common.internal.ConnectionPool.reserve(ConnectionPool.j
ava:166) at weblogic.jdbc.common.internal.ConnectionPool.reserveNoWait(Connection
Pool.java:127) at weblogic.jdbc.common.internal.RmiDataSource.getPoolConnection(RmiData
Source.java:194) at weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSour
ce.java:219) at weblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.getConnection(RDBMSP
ersistenceManager.java:317) at weblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.createDefaultDBMSTab
le(RDBMSPersistenceManager.java:1149) at weblogic.ejb20.utils.TableVerifier.verifyTableExistsAndCreateMaybe(Ta
bleVerifier.java:428) at weblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.verifyTablesExist(RD
Unable to deploy EJB: CustomerBean from \ejb:
Errors encountered ''The Container-Managed Persistence Entity EJB failed while
creating its SQL Type Map. The error was: Invalid object name 'localcustomer_localsubscription'.
Severity 16, State 1, Procedure 'IVM_SERVER null', Line 1', 'Error encountered
while attempting to create Default DBMS Table: 'localcustomer_localsubscription'.
Error Text: 'weblogic.common.ResourceException: No resource s available'.''
---------------End error ----------------------
---------------my ejb-jar.xml
<ejb-jar>
- <enterprise-beans>
- <entity>
<ejb-name>AddressBean</ejb-name>
<local-home>customer.LocalAddressHome</local-home>
<local>customer.LocalAddress</local>
<ejb-class>customer.AddressBean</ejb-class>
<persistence-type>Container</persistence-type>
<prim-key-class>java.lang.String</prim-key-class>
<reentrant>False</reentrant>
- <cmp-field>
<field-name>addressID</field-name>
</cmp-field>
- <cmp-field>
<field-name>street</field-name>
</cmp-field>
- <cmp-field>
<field-name>city</field-name>
</cmp-field>
- <cmp-field>
<field-name>zip</field-name>
</cmp-field>
- <cmp-field>
<field-name>state</field-name>
</cmp-field>
<primkey-field>addressID</primkey-field>
</entity>
- <entity>
<ejb-name>CustomerBean</ejb-name>
<local-home>customer.LocalCustomerHome</local-home>
<local>customer.LocalCustomer</local>
<ejb-class>customer.CustomerBean</ejb-class>
<persistence-type>Container</persistence-type>
<prim-key-class>java.lang.String</prim-key-class>
<reentrant>False</reentrant>
<abstract-schema-name>CustomerBean</abstract-schema-name>
- <cmp-field>
<field-name>customerID</field-name>
</cmp-field>
- <cmp-field>
<field-name>firstName</field-name>
</cmp-field>
- <cmp-field>
<field-name>lastName</field-name>
</cmp-field>
<primkey-field>customerID</primkey-field>
- <query>
- <query-method>
<method-name>findByLastName</method-name>
- <method-params>
<method-param>java.lang.String</method-param>
</method-params>
</query-method>
- <ejb-ql>
- <![CDATA[ SELECT OBJECT(o) FROM CustomerBean AS o
]]>
</ejb-ql>
</query>
- <query>
- <query-method>
<method-name>findByFirstName</method-name>
- <method-params>
<method-param>java.lang.String</method-param>
</method-params>
</query-method>
- <ejb-ql>
- <![CDATA[ SELECT OBJECT(o) FROM CustomerBean AS o
]]>
</ejb-ql>
</query>
</entity>
- <entity>
<ejb-name>SubscriptionBean</ejb-name>
<local-home>customer.LocalSubscriptionHome</local-home>
<local>customer.LocalSubscription</local>
<ejb-class>customer.SubscriptionBean</ejb-class>
<persistence-type>Container</persistence-type>
<prim-key-class>java.lang.String</prim-key-class>
<reentrant>False</reentrant>
<abstract-schema-name>SubscriptionBean</abstract-schema-name>
- <cmp-field>
<field-name>type</field-name>
</cmp-field>
- <cmp-field>
<field-name>title</field-name>
</cmp-field>
<primkey-field>title</primkey-field>
- <query>
- <query-method>
<method-name>findAllSubscriptions</method-name>
<method-params />
</query-method>
- <ejb-ql>
- <![CDATA[ SELECT OBJECT(o) FROM SubscriptionBean AS o
]]>
</ejb-ql>
</query>
</entity>
</enterprise-beans>
- <relationships>
- <ejb-relation>
<ejb-relation-name>LocalCustomer-LocalAddress</ejb-relation-name>
- <ejb-relationship-role>
<ejb-relationship-role-name>LocalCustomer-Has-LocalAddresss</ejb-relationship-role-name>
<multiplicity>one</multiplicity>
- <relationship-role-source>
<ejb-name>CustomerBean</ejb-name>
</relationship-role-source>
- <cmr-field>
<cmr-field-name>addresses</cmr-field-name>
<cmr-field-type>java.util.Collection</cmr-field-type>
</cmr-field>
</ejb-relationship-role>
- <ejb-relationship-role>
<ejb-relationship-role-name>LocalAddress-Has-LocalCustomer</ejb-relationship-role-name>
<multiplicity>many</multiplicity>
- <relationship-role-source>
<ejb-name>AddressBean</ejb-name>
</relationship-role-source>
- <cmr-field>
<cmr-field-name>customer</cmr-field-name>
</cmr-field>
</ejb-relationship-role>
</ejb-relation>
- <ejb-relation>
<ejb-relation-name>LocalCustomer-LocalSubscription</ejb-relation-name>
- <ejb-relationship-role>
<ejb-relationship-role-name>LocalCustomers-Have-LocalSubscriptions</ejb-relationship-role-name>
<multiplicity>many</multiplicity>
- <relationship-role-source>
<ejb-name>CustomerBean</ejb-name>
</relationship-role-source>
- <cmr-field>
<cmr-field-name>subscriptions</cmr-field-name>
<cmr-field-type>java.util.Collection</cmr-field-type>
</cmr-field>
</ejb-relationship-role>
- <ejb-relationship-role>
<ejb-relationship-role-name>LocalSubscriptions-Have-LocalCustomers</ejb-relationship-role-name>
<multiplicity>many</multiplicity>
- <relationship-role-source>
<ejb-name>SubscriptionBean</ejb-name>
</relationship-role-source>
- <cmr-field>
<cmr-field-name>customers</cmr-field-name>
<cmr-field-type>java.util.Collection</cmr-field-type>
</cmr-field>
</ejb-relationship-role>
</ejb-relation>
</relationships>
- <assembly-descriptor>
- <container-transaction>
- <method>
<ejb-name>AddressBean</ejb-name>
<method-name>*</method-name>
</method>
<trans-attribute>Required</trans-attribute>
</container-transaction>
- <container-transaction>
- <method>
<ejb-name>CustomerBean</ejb-name>
<method-name>*</method-name>
</method>
<trans-attribute>Required</trans-attribute>
</container-transaction>
- <container-transaction>
- <method>
<ejb-name>SubscriptionBean</ejb-name>
<method-name>*</method-name>
</method>
<trans-attribute>Required</trans-attribute>
</container-transaction>
</assembly-descriptor>
</ejb-jar>
------------------End of ejb-jar.xml---------------
Please help
Thanks in advance
MikeHi Gaurav,
Other applications used the same the datasource, which I used for this application,
are running fine.
I think there is some bug in the wlserver 6.1 to create the join table. I think
it is the time I should ask the bea wlserver 6.1.
Mike
"Gaurav Khanna" <[email protected]> wrote:
This implies that there are no database connections available. You need
to
check if you can log into your database instance. By default there are
30
connections specified for an instance in Oracle. FYI.
"Mike" <[email protected]> wrote in message
news:[email protected]...
Hi all,
I wonder any one comes across with deploying beans with M:Nrelationship with
"No resource available".
I defined the relationship in ejb-jar.xml and dbms in the
weblogic-cmp-rdbms-jar.xml, but when I deployed the beans I got
the following error
------ Error message-----
weblogic.common.ResourceException: No resources available atweblogic.common.internal.ResourceAllocator.reserve(ResourceAllocator.
java:568) atweblogic.common.internal.ResourceAllocator.reserve(ResourceAllocator.
java:400) atweblogic.common.internal.ResourceAllocator.reserveNoWait(ResourceAllo
cator.java:368) atweblogic.jdbc.common.internal.ConnectionPool.reserve(ConnectionPool.j
ava:166) atweblogic.jdbc.common.internal.ConnectionPool.reserveNoWait(Connection
Pool.java:127) atweblogic.jdbc.common.internal.RmiDataSource.getPoolConnection(RmiData
Source.java:194) atweblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSour
ce.java:219) atweblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.getConnection(RDBMSP
ersistenceManager.java:317) atweblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.createDefaultDBMSTab
le(RDBMSPersistenceManager.java:1149) atweblogic.ejb20.utils.TableVerifier.verifyTableExistsAndCreateMaybe(Ta
bleVerifier.java:428) atweblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.verifyTablesExist(RD
Unable to deploy EJB: CustomerBean from \ejb:
Errors encountered ''The Container-Managed Persistence Entity EJB failedwhile
creating its SQL Type Map. The error was: Invalid object name'localcustomer_localsubscription'.
Severity 16, State 1, Procedure 'IVM_SERVER null', Line 1', 'Errorencountered
while attempting to create Default DBMS Table:'localcustomer_localsubscription'.
Error Text: 'weblogic.common.ResourceException: No resource savailable'.''
---------------End error ----------------------
---------------my ejb-jar.xml
<ejb-jar>
- <enterprise-beans>
- <entity>
<ejb-name>AddressBean</ejb-name>
<local-home>customer.LocalAddressHome</local-home>
<local>customer.LocalAddress</local>
<ejb-class>customer.AddressBean</ejb-class>
<persistence-type>Container</persistence-type>
<prim-key-class>java.lang.String</prim-key-class>
<reentrant>False</reentrant>
- <cmp-field>
<field-name>addressID</field-name>
</cmp-field>
- <cmp-field>
<field-name>street</field-name>
</cmp-field>
- <cmp-field>
<field-name>city</field-name>
</cmp-field>
- <cmp-field>
<field-name>zip</field-name>
</cmp-field>
- <cmp-field>
<field-name>state</field-name>
</cmp-field>
<primkey-field>addressID</primkey-field>
</entity>
- <entity>
<ejb-name>CustomerBean</ejb-name>
<local-home>customer.LocalCustomerHome</local-home>
<local>customer.LocalCustomer</local>
<ejb-class>customer.CustomerBean</ejb-class>
<persistence-type>Container</persistence-type>
<prim-key-class>java.lang.String</prim-key-class>
<reentrant>False</reentrant>
<abstract-schema-name>CustomerBean</abstract-schema-name>
- <cmp-field>
<field-name>customerID</field-name>
</cmp-field>
- <cmp-field>
<field-name>firstName</field-name>
</cmp-field>
- <cmp-field>
<field-name>lastName</field-name>
</cmp-field>
<primkey-field>customerID</primkey-field>
- <query>
- <query-method>
<method-name>findByLastName</method-name>
- <method-params>
<method-param>java.lang.String</method-param>
</method-params>
</query-method>
- <ejb-ql>
- <![CDATA[ SELECT OBJECT(o) FROM CustomerBean AS o
]]>
</ejb-ql>
</query>
- <query>
- <query-method>
<method-name>findByFirstName</method-name>
- <method-params>
<method-param>java.lang.String</method-param>
</method-params>
</query-method>
- <ejb-ql>
- <![CDATA[ SELECT OBJECT(o) FROM CustomerBean AS o
]]>
</ejb-ql>
</query>
</entity>
- <entity>
<ejb-name>SubscriptionBean</ejb-name>
<local-home>customer.LocalSubscriptionHome</local-home>
<local>customer.LocalSubscription</local>
<ejb-class>customer.SubscriptionBean</ejb-class>
<persistence-type>Container</persistence-type>
<prim-key-class>java.lang.String</prim-key-class>
<reentrant>False</reentrant>
<abstract-schema-name>SubscriptionBean</abstract-schema-name>
- <cmp-field>
<field-name>type</field-name>
</cmp-field>
- <cmp-field>
<field-name>title</field-name>
</cmp-field>
<primkey-field>title</primkey-field>
- <query>
- <query-method>
<method-name>findAllSubscriptions</method-name>
<method-params />
</query-method>
- <ejb-ql>
- <![CDATA[ SELECT OBJECT(o) FROM SubscriptionBean AS o
]]>
</ejb-ql>
</query>
</entity>
</enterprise-beans>
- <relationships>
- <ejb-relation>
<ejb-relation-name>LocalCustomer-LocalAddress</ejb-relation-name>
- <ejb-relationship-role>
<ejb-relationship-role-name>LocalCustomer-Has-LocalAddresss</ejb-relationshi
p-role-name>
<multiplicity>one</multiplicity>
- <relationship-role-source>
<ejb-name>CustomerBean</ejb-name>
</relationship-role-source>
- <cmr-field>
<cmr-field-name>addresses</cmr-field-name>
<cmr-field-type>java.util.Collection</cmr-field-type>
</cmr-field>
</ejb-relationship-role>
- <ejb-relationship-role>
<ejb-relationship-role-name>LocalAddress-Has-LocalCustomer</ejb-relationship
-role-name>
<multiplicity>many</multiplicity>
- <relationship-role-source>
<ejb-name>AddressBean</ejb-name>
</relationship-role-source>
- <cmr-field>
<cmr-field-name>customer</cmr-field-name>
</cmr-field>
</ejb-relationship-role>
</ejb-relation>
- <ejb-relation>
<ejb-relation-name>LocalCustomer-LocalSubscription</ejb-relation-name>
- <ejb-relationship-role>
<ejb-relationship-role-name>LocalCustomers-Have-LocalSubscriptions</ejb-rela
tionship-role-name>
<multiplicity>many</multiplicity>
- <relationship-role-source>
<ejb-name>CustomerBean</ejb-name>
</relationship-role-source>
- <cmr-field>
<cmr-field-name>subscriptions</cmr-field-name>
<cmr-field-type>java.util.Collection</cmr-field-type>
</cmr-field>
</ejb-relationship-role>
- <ejb-relationship-role>
<ejb-relationship-role-name>LocalSubscriptions-Have-LocalCustomers</ejb-rela
tionship-role-name>
<multiplicity>many</multiplicity>
- <relationship-role-source>
<ejb-name>SubscriptionBean</ejb-name>
</relationship-role-source>
- <cmr-field>
<cmr-field-name>customers</cmr-field-name>
<cmr-field-type>java.util.Collection</cmr-field-type>
</cmr-field>
</ejb-relationship-role>
</ejb-relation>
</relationships>
- <assembly-descriptor>
- <container-transaction>
- <method>
<ejb-name>AddressBean</ejb-name>
<method-name>*</method-name>
</method>
<trans-attribute>Required</trans-attribute>
</container-transaction>
- <container-transaction>
- <method>
<ejb-name>CustomerBean</ejb-name>
<method-name>*</method-name>
</method>
<trans-attribute>Required</trans-attribute>
</container-transaction>
- <container-transaction>
- <method>
<ejb-name>SubscriptionBean</ejb-name>
<method-name>*</method-name>
</method>
<trans-attribute>Required</trans-attribute>
</container-transaction>
</assembly-descriptor>
</ejb-jar>
------------------End of ejb-jar.xml---------------
Please help
Thanks in advance
Mike -
Please help me out with "Data only excel option "
Post Author: pavan pusuluri
CA Forum: Crystal Reports
When i am trying to spool the data with data only excel option using crystal reports XI, the records are appearing in two rows instead of single row. i have studied that when we use data only excel option entire record will be displayed in a single row,but it is not appearing in that way.Please help me out in fixing this bug. I am very much new to crytal reports.Post Author: pavan pusuluri
CA Forum: Crystal Reports
I thank you for the prompt reply.
All the field are of same size and height. The format is fine. The report is designed in such a way that data is displayed in three detail sections. What i would like to have is " i want the data in these three sections to be displayed in a single row when i select the data only excel export option".Please help me out in fixing this issue.
Thanks in anticipation -
Authorization Variables with Optional Selection Variables
Has anyone used authorization variables in addition to optional selection variables?
I'm getting funny results and trying to figure out why.
Here's the scenario:
InfoObject zcompany has 5 values A - E
UserX is authorized to see all 5 values in his user profile.
In the query zcompany has two variables assigned to it. 1 is an optional multiple selection variable, and 2) is an authorization variable
Here's the funny result:
User X runs the query and selects company A from the optional selection criteria, he clicks execute and but the results returned are companies A - E. ?????
Is there a processing order here? Are the authorizations being processed last and overwriting the selection criteria? My users are annoyed with me because they feel like they have to pick everything twice.
Any help anyone could provide would be much appreciated.
thanks
SmittyHey Bhanu,
thanks for the reply.
I kinda tried that in the past and found out that it really annoyed my user community.
I guess im looking for the best of both worlds here, because I like the fact that the authorization variable limits the optional selection values for the users that are only allowed to see one or two things, but for the super users this creates the issue described above because they're allowed to see everything. But sometimes, the power users only want to see one or two values... and thus the problem above.
I noticed in the query information the value for zcompany was "Complex Selection" is that the system's way of saying that it's confused? -
Please help me on the data selection - drill down
Can any one please help me,
I'm struggling with the data selection. I trid to finding the solution all the way but no hopes.
see below are my data sets:
1) from this table i have to plot piechart.
Division Name Percentage
AMESA 1.79%
ANZ 1.79%
Central 5.36%
Commercial 8.93%
Eastern Europe 1.79%
Greater China 3.57%
Italy 10.71%
Japan 35.71%
Latin America 12.50%
Mid Atlantic/South 1.79%
Northeast 3.57%
NY/NJ 1.79%
SE Asia 7.14%
TME 3.57%
2) this below table is having the data same as "diivsion" above and their coerponding "Product" with its counts.
Here i want plot the bar chart with product and its counts. and also this chart should display only the products for the division selection above.
I mean that, when the users clicks the particular "division" then the coreponding "products" should only be displayed on the bar chart.
Division Name Product Escalations
AMESA CLARiiON 1
ANZ Replication Manager 1
Central ControlCenter 1
Open Replicator 1
Symmetrix 1
Commercial CLARiiON
Disk Library 2
Celerra 1
PowerPath 1
Symmetrix 1
Eastern Europe Celerra 1
Greater China CLARiiON
RecoverPoint 1
Symmetrix 1
Italy CLARiiON 2
Disk Library 1
Invista 1
Networker 1
RecoverPoint 1
Japan PowerPath
CLARiiON 5
Disk Library 3
Symmetrix 3
Celerra 2
Replication Manager 2
Avamar 1
Centera 1
Connectrix 1
ControlCenter 1
I can't try using dynamic visibility with the pie chart and bar chart. because my dashboard is having multiple tabs so i want to use the dynamic visibility there.
any help appreciated.
Thanks,
rdc422
Edited by: rdc422 on Aug 24, 2009 12:18 PMRadha,
Looks like you are still facing problem with dynamic visibility, i had sent the xlf file to your email.
I created drill down for
Japan
Commercial
Central
Similarly you can do it for others.
-Anil
Maybe you are looking for
-
How to use INNER JOIN in such case
when i program as below[CASE1]. the code is able to active. CASE1: ========================== DATA: WK_BUKRS LIKE T001-BUKRS, WK_BUTXT LIKE T001-BUTXT, WK_TABLE(4) TYPE C VALUE 'T001'. START-OF-SELECTION. WK_BUKRS = 'DECN'. PERFORM GE
-
Restore deleted photos on my ipad
Hi I have done a stupid thing and deleted my photos from my ipad ! no iCloud yet set up. how can I restore them? HELP
-
I'm working on a movie project in iMovie HD 6. I have used the peephole in Video FX (editing) many times. It has always worked great when I want to highlight something in the movie. Tonight I inserted the peephole and at the end of the transition the
-
Applying a Gradient Feather with a Drop Shadow...
Howdy, I am currently working in Indesign CS3 and I have an outlined image in my document and I am applying a gradient feather so that the image fades from opaque to transparent at the bottom. If I apply a black colored drop shadow to the object the
-
My iPod was a Creative. OMG!!!!1!!1!!!111!!1!