Please help set up wireless printer

Ive plugged in my printer and still cannot get a wireless connection. Please help

See requirements for AirPrint and printers that support AirPrint here:
http://support.apple.com/kb/ht4356
If your printer supports AirPrint but does not work then:
Your printer might need a firmware update
Your printer must be on the same WiFi network
Your router must support Bonjour (Zero-configuration networking).
Troubleshooting:
Turn Off iPhone, WiFi router (remove from power), and Printer (remove from power).
Turn on WiFi router
Wait 30 seconds
Turn on printer
Wait 30 seconds
Turn on iPhone
Try to print.
If you need more help then what model Brother printer do you have?

Similar Messages

Problems setting up wireless printing

I can set up to print from my laptop with a USB connection to the printer. I want to be able to print when away from my desk, so have tried for 2 years, on and off, to get my printer to print wirelessly. I've probably spent 10+ hours trying to get this set up. In the end, I always end up having to reinstall the printer with the same old USB connection.
This is driving me crazy. I'm a tech writer for a software company and am very computer savvy. Yet my non-techie family members have all managed to set up wireless printing at their homes in 5 minutes or less with different brands of printers.
Here are the steps I'm following, though I have also tried numerous variations, such as trying it with my USB cable connected vs. disconnected.
1) Uninstall current (USB) printer installation.
2) On the printer itself, verify that Settings > Network Settings are at the defaults.
3) Using most recent drivers and installation .exe from the HP website, start a new printer installation.
4) When prompted, select "wireless installation."
RESULT: Even though my firewall is OFF, it searches and says there are no printers on the network. (Huh? What network?)
5) Try again, and this time select "network installation."
RESULT: Even though my firewall is OFF, it searches and says it can't detect a network.
If wireless installation requires a network, but network installation does not cause a network to be installed, I'm not sure where to go from here.
6) I've also tried downloading and installing the ePrint utility, but when I get midway through the installation, it tells me it can't find my printer.
I'm suspicious that my model M1212nf MFP may not even allow wireless printing. Some info on the HP website says to check that a particular button lights up to show the printer is online. This light doesn't exist on my printer model. On the other hand, my physical printer's settings has settings like: "display IP address," etc., that would lead me to believe that it can operate wirelessly.
I have read all of the related HP printer help, and there is nothing that explains in simple language what types of cables I need to set up a network and/or wireless connection, when to plug them in, which installations to perform out of the many add-ons available, etc. I am sure this is a 5 minute process if there was just some good explanation in the UP help of how to do it. Assistance would be appreciated!
This question was solved.
View Solution.

Hello @SKYdiz,
Welcome to the HP Support Forums!
I understand that you have had issues for the last 2 or so years and spent multiple hours attempting to configure your HP LaserJet Pro M1212nf Multifunction Printer for wireless printing. At this point I'm going to offer some additional information on this matter. First, are you sitting down?
Unfortunately, the HP LaserJet Pro M1212nf Multifunction Printer is NOT a wireless model printer. The 'nf' at the end of the printer name stands for 'network, fax'. Therefore, while your printer is not wirelessly capable of connecting to your router, it CAN connect with an ethernet cable.
All you need to do is connect an ethernet cable from the rear of your printer into your router. Than any devices connected to that same router (either through wireless or wired ethernet connections) would be able to 'see' your printer on the network and print to your printer. For more information regarding the ethernet setup on your printer, please refer to: Setting Up the Printer for a Wired Network in Windows 7 for the HP LaserJet Printers.
Now if an ethernet connection does not work in your specific network configuration, than HP does manufacture other Laserjet models that do use the wireless feature. Here are two Laserjets that are black only, multifunction wireless units that are similar to your current model printer : HP LaserJet Pro MFP M127fw and HP LaserJet Pro MFP M225dw.
Please let me know if this clears up any confusion. Should you have any other questions or concerns I will be more than happy to assist you. Happy New Year!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

How do I set up wireless printing between my desk jet 2542 and my computer?

how do I set up wireless printing between my desk jet 2542 and my computer?

Hello danamaple,
Welcome to the HP Support Forums!
Depending on the Operating System installed on the computer, setting up the Deskjet 2540 can be done different ways. The easiest and most popular method is to use a USB cable and the printer software to setup wireless on the printer.
Installing the Printer Software for a Wireless Network Connection<---
This guide should provide the needed information for you to setup the printer on the network. Please let me know if you have anymore questions.
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

How do I set up wireless printing of my Officejet Pro 8500 on a laptop with Windows 8?

How do I set up wireless printing from my all in one Officejet Pro 8500 printer to my laptop with Windows 8?

You can set up your printer for wireless pretty easily if you have the Full Feature Software installed on your computer for your printer. The setup is done as part of the installation.
Read through below, then select how you wish to proceed. There is a video to assist - see below!
Install Printer Driver / Software
If your printer stops working (and it’s not a hardware problem), it may be due to software or driver issues. There are tools to help you diagnose the problem and help documents to guide you to success.
You might just desire extra features for your printer, or need extra tools to help with scheduled maintenance.
In many cases, you can (re)install the Full Feature Softwarefor your printer to enhance its capabilities. The HP Solution Center is an integrated part of the FFS. For e-print, you will want the e-print software.
If you have the CD that came with your printer, use that to install your Printer software -- IF the CD is compatible with your current Operating System. If you do not have the CD, or if the software on the CD is outdated, then you can use the online installation tools.
(Re)install the basic driver or HP Printer Full Feature Software or other software for your printer:
Drivers control hardware connected to the computer (wired or wireless)
Software controls the programs that interact with the User
Go to the top of the forum page to Support and Drivers
Officejet Pro 8500 Series
Enter your Printer Model information, and then go to Software and Drivers...
Enter your Operating System in the Drop-down menu... Click NEXT and Scroll down
Look for category Driver - Product Installation Software
Select the appropriate Basic Driver, e-print, or Full Feature Software, as appropriate
NOTE: You may also wish to download the Print and Scan Doctor and / or other Tools from Category - Utilities
Save the *.exe installation package(s) on your computer
Pay attention to the name and the location of the file(s) when you save the file(s). The file(s) will likely save to the "Downloads “folder.
You may remove your existing printer software with the following tool. Fixit is of particular use when the existing printer software is being replaced due to severe problems with the printing program.
Fixit -- Fix problems with programs that can't be installed or uninstalled
NOTE: If you have a recent working version of the Full Feature Software on your computer, you may opt to skip removing the existing printer software in the above separate step. During installation of your Full Feature Software, when the installer package detects the “old” printer software on your computer, the program will ask you to remove that old software: The program will then invoke an internal printer software removal program that is written to remove printer software. Once most of the old printer software is removed, you will be asked to Reboot your computer and log back in. After you log in, the final bits of the old printer program(s) are deleted and the new software will be installed. Depending on your system, the whole uninstall and install process might take as much as eight to twelve minutes.
Remember to Install the programs from Category Utilities first, if applicable, as these are smaller in size.
Install the downloaded Printer Software package last.
If you have ‘Admin’ control, you may highlight the package and “double-click” to install it, else Right-Click, Select ‘run as Administrator’ and install.
NOTES:
If using: Download and install the driver software before connecting a USB cable.
After the initial installation is complete, be sure to check for and install any relevant updates - check Category - Update. The Updates are important and can mean the difference between software that works as expected and software that does not work.
You may also wish to check for a Category named Firmware. Installation of any package in this Catagory is personal choice and must be based on the contents in the package and whether or not your printer is working as expected.
Extra help for setting up your Wireless Printer:
Reconfiguring your printer
Troubleshooting Your Printer - Network
Video Help for installing your Printer:
Downloading and Installing a Full Solution Driver in Windows 8 Using a Wireless Connection
Kind Regards,
Dragon-Fur

I am unable to set up wireless printing to a new hp office jet pro 6835 using a mac with OS X 10.9

I am uable to set up wireless printing for a new hp officejet pro 6835 with mac 10.9

Welcome to the forums @generalnuisance
I would suggest trying the steps in the guide I have picked out for you below. The steps should help you connect wireless to your Officejet 6835 and your Mac, running Mavericks. Let me know the outcome
Setting Up the Printer for a Wireless or Wired Network for the HP Officejet 6810 and Officejet Pro 6...
Cheers
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Can't set up wireless printing to J6480 from MacBook Air

Jeez, I'm getting frustrated. Usually I'm pretty good at this stuff but I just can't figure this simple thing out.
I want to print to my J6480 from my MacBook Air running OS10.8.2.
Am I missing something very simple? The HP article on setting up wireless printing just says, basically, open the HP Device Manager and follow the instructions. I think I downloaded the drivers just fine, but I got no "Hewlett Packard" folder in my Applications folder, I have no Device Manager app, and I can't figure out where to download it.
Thank you in advance for any help or guidance.
Streptile

Hi,
after many frustrating attempts I've found the solution was incredibly simple - try to check it yourself:
Open the main Network (System preferences) tab. On the left side you'll see the list of all network devices. Move the Wi-Fi field to the top (first) position in the list (you can do it via the pop-up menu next to the + and - buttons).
It was all I needed. Immediately after this I've got the access to wireless printing and scanning. No problem since then.
My configuration is Photosmart 5010 and MacOS 10.8.3, but the action is not printer specific, so it should work for all with the same problem.
Good luck.

How do I add a mobile device to an already set up wireless printer.

Hw do I add a mobile device to my all ready set up wireless printer, I have the C410A all in one printer.

Hi,
The printer is connected directly (wireless) to other device or thru the Network ?
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

I bought a used Mac Book from the widow of a neighbor who had died. We don't know the password. How can we get in to set up wireless printing??

I bought a used Mac Book from the widow of a neighbor who had died. I am trying to set up wireless printing for a new HP printer and it asks for the Administrators password. Is there any way to break through this and create a new password?

Is the Macbook running? If yes, go to Apple Menu About This Mac to find out the version of Mac OS X you are running.
If the computer is not working, do you know the model, or the version of the operating system on the MB?
You can track down some information with the serial number. Here's how to find the serial number:http://support.apple.com/kb/ht1366
With the serial number you can identify the model on this site:
http://www.powerbookmedic.com/identify-mac-serial.php
When we know the model it will be much easier to answer your questions.

How do i set up wireless printing from my iphone 3GS to my HP Photosmart 5510.

how do i set up wireless printing from my iphone 3Gs to my HP Photosmart 5510 e-all-in-one series B111-A? I have a Mac laptop with Snow Leopard

Hi JCMCCM,
You can get started with your iPhone by going to this link: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02796271&cc=us&dlc=en&lc=en&product=5063582&tmp...
I am an HP employee

What printer server password do i need to set up wireless printing?

trying to set up wireless printing. asking for printer server password-- where can i find this?

Possibly asking for the password of your wi-fi network - I know that's how I set up wifi on my Canon printers.
Clinton

Help Setting Up Wifi Printer...

I have gone to my parents house for the weekend and brought my Macbook with me. It seems he upgraded his old Dell printer for the new All-in-one Dell 948 Wifi. I can see the printer on my Network, but I can't seem to add the printer using my Printer Utility, can someone help set-up this printer. BTW I do know the IP Address of the printer and the MAC address, I was told I have to log into the Wifi Network in order to print, or I could do ad-hoc.
Cheers,
Paul

I don't thinl it's Postscript and I don't think there is a Dell Driver for it. Any third party solutions?

HT2421 set up wireless printer connection

Requesting assistance with required steps to set up wireless printer connection

This would be a starting point.. I cannot see the later articles..
But the method is basically the same..
I have only done it using the manual method.. ie plug the printer into a computer by USB.. and run through the setup wizard CD.. supplied with most printers.. to set them to infrastructure mode to the wireless of the TC.
It works fine for all the printers i have tried.
So read the instructions for the printer for Mac installation.

Under MacBookAir OS X Lion 10.7.5 and I am unable to open printer utility for setting up wireless printer??? who van help me Thanks

I try to set up my printer HPLaserP1102w with a Wi-Fi connrection with AirPort Utility version 6.1
I have installed ans uninstall via /library/printer/lHPlaser with no results.
Can somebody help me?
Thanks

Thank you - that all makes sense. It is, indeed, exactly what I did when I upgraded.
I'm also writing this on the machine that crashed a few minutes ago (I posted the crash in another thread). I got back with a 'safe boot' - as I have done a few times before.
I've also de-installed little snitch (and then done a safe-boot & then re-boot ) since that seemed involved. I de-installed Adobe flash, since that seemed to be a problem - I then re-installed the later, apparently fixed, flash. The most recent crashes don't seeme to have a problem with flash any more.
I've posted the various ( generally different ) crashes. I also posted a summary of the similar lines that turn up in most of the crashes.
Unfortuantely, I'm actually trying to use the machine to meet some urgent deadlines and all this is not making it at all easy.
I had had great hopes for 10.7.2 - I thought that the crashes must be pretty common, so would have a common aetiology. There do seem to have been some fundamental changes to the file sytem and to the video interface (that seems to cause problems to brand new iMacs as well as to my 2009 iMac).

Please Help me with my printer!

I got an Epson NX420 free with my iMac at the Apple Store. The problem that I am having is that Mac OSX rarely will list or see my printer in system prefrerences. I have the printer wirelessly connected to the the same router that my iMac is on. The router is the Verizon Fios router/modem that they give you when you get fios internet. Even if System Preferences finds the router, it will either say that the software is not available, or if it gets passed that, it says that the printer is not connected when I try to print. However, if I set up a Wifi tethering network on my phone, and connect both the printer and the imac to it, it works perfectly fine. I went into the router, and the router is identifying the printer as being connected and having the internal IP Address 192.168.1.6. Other macs in my house can see the printer and print to it, but this one cannot. Even the windows machines are not having a problem. Please help me, I need to print out things for work!
Thank you so much!

For the Mac to see the printer on the wireless network it relies on a protocol called Bonjour. With this protocol the printer advertises itself on the network and a working Mac will show this in the Add Printer browser and via Safari by sellecting Bonjour in the Bookmarks view. If the printer is not seen in Safari then open Activity Monitor and check that you have the process mdnsResponder. If that process is present but the printer is still not visible in Safari then try restarting Lion.
If the restart is of no help then I would check if the Epson model supports an IP based protocol such as LPD. With this protocol you do not browse for the printer. Instead you enter its IP address and manually select a driver. So if the printer responds to pinging its IP address from Network Utility then using an IP protocol could be an alternative if Bonjour does not work.

Issues setting up wireless printing

I have been trying for hours to figure out how to set up my hp printer to print wirelessly. I have the c4780. I can print through a USB cord but that's it. I tried walking through the instructions online but they all start from before you've even installed the printer at all. I have installed the printer on my mac, which is why I can print through a cord but I can't set up the wireless. It always says FAIL under SSID found. I haven't even made it ot the point where I can see my network name on the printer's menu.
Please help.

Please explain in detail all steps you are following to connect to your wireless router. What page in the manual are you looking at? When setting up wireless make sure you connect the USB cable only when the setup tells you too.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Please help set up wireless printer

Similar Messages

Maybe you are looking for