Please help. Setting up a Library on external HD and reconfigure Apple TV

Please help. I have a macbook air and recently purchased the apple tv. I am looking for help on 2 things.
1- how do I create a new iTunes library on my external HD so that the movies I have purchased from iTunes can be stored there instead of on the hd of my MBA and I can free up the space on the MBA?
2- I have read on a few of the posts that there is a way to reconfigure the Apple TV to sync with that new library (on the external HD) instead of being linked with the MBA hd. But none of them gives steps needed to get this done. Can someone please help??
Thank you!!

1. On the external HD create a new empty folder call it what you will (itunes new folder), then in itunes preferences/advanced change your 'itunes music folder location' by locating and selecting the new folder. Ensure that 'keep itunes...organised' and 'copy itunes....' check boxes are checked. Close preferences and then select file/library/consolidate library from your menu bar.
This will then copy your entire media collection to the new folder, once complete you can then trash the old itunes folder which by default should be at user/music/itunes/itunes music.
2. If you follow the steps above there should be no need to reconfigure the tv, it should continue to see the library in the same way as before.
Note.
You will no longer be able to play any media on the MBA or stream any content to the tv unless your ext HDD is attached.
It is possible to keep some content on the MBA so that you can access it and play it while on the go, this is fairly easy but not quite as easy as keeping your library in one place, let us know if you want to do this.

Similar Messages

I have connected a new (set up for mac) seagate external HD and although file sharing is turned on the HD doesn't show up on any of the other computers on our network?????? Please help!!!!!

I have connected a new (set up for mac) seagate external HD and although file sharing is turned on the HD doesn't show up on any of the other computers on our network?????? Please help!!!!!

If the HD is setup for Mac and plugged into the AE.. with file sharing on, it should work.
Try manually mounting the disk.
In finder use go, connect to server, and type in AFP://AEName or AFP://AEIPaddress.. where you replace what I wrote with the actual name or actual IP.
Later versions of Mac OS.. like ML for some strange reason have their preferences set by default to not show network drives.. change finder preference to see everything.

I have macbook pro 13" I want to know how to copy files from my mac to the external Toshiba Hard Drive. I can't even delete files from my external hard drive. please help me my macbook HD is almost full and I have to copy my images to the Toshiba HD

I have macbook pro 13" I want to know how to copy files from my mac to the external Toshiba Hard Drive. I can't even delete files from my external hard drive. please help me my macbook HD is almost full and I have to copy my images to the Toshiba HD

To delete files from your external HDD, attach it to your MBP and drag the unwanted files to trash and then empty trash.
Then you select the files that you want to transfer by 'drag and drop' to the external HDD and trash the files on your MBP.
Ciao.

I just got the iPhone 5 and noticed that the message alerts will only alert once . I have it set up as 3 times and its not working . Please help. I'm running 6.0.2 and I really starting to get ****** off with apple products

I just got the iPhone 5 and noticed that the message alerts will only alert once . I have it set up as 3 times and its not working . Please help. I'm running 6.0.2 and I really starting to get ****** off with apple products

Instead of getting annoyed, read the User's Guide and try basic troubleshooting.

Please help! We got a used Mac Mini and we don't have the former owner's password, so we can't install anything like flash player. Does anyone know how to get around this?

Please help! We got a used Mac Mini and we don't have the former owner's password, so we can't install anything like flash player. Does anyone know how to get around this? I don't know how to wipe the hard drive, and the support online doesn't seem to work.

As posted previously:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
If installing Leopard the process is similar in some respects. If you wish to begin anew then after selecting the target disk click on the Options button and select the Erase and Install option then click on the OK button. To install over an existing system do the following:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

Hello, please help, my interface is connected to the microphone and when i open Logic 9 it does´t work. But I opened garageband to check and it works fine. I can record voice with any effect... With Logic i see the sound passes in the interface.

Hello, please help, my interface is connected to the microphone and when i open Logic 9 it does´t work. But I opened garageband to check and it works fine. I can record voice with any effect... With Logic i see the sound passes in the interface but does not arrive in Logic. The Loops works fine and i can hear. Is just the sound to record the voice it does not work. What can i do ??? I used Logic before in the same computer and it worked fine. Thank you so much, I´m a begginer recording myself.

Make sure you go into preferences in Logic and set the audio input to be your interface and the audio output to be either built in output or the interface, if that is hooked up to something else. It sounds like Garageband has the audio interface set as the input but not Logic.
Also make sure you close all other applications except Logic to ensure it is not running in slave mode...

Bluetooth shuttted down after I updated to Mavericks, please help me ! I am 70 Years old and worked very happy with my iMac (21,5" mid 2010, 3,2 GHz Intel Core 3) until I updated him from SnowLeopard 10.6.8 to Mavericks 10.9.2. 2 Days all was OK. Next M

Bluetooth shuttted down after I updated to Mavericks, please help me !
I am 70 Years old and worked very happy with my iMac (21,5“ mid 2010, 3,2 GHz Intel Core 3)
until I updated him from SnowLeopard 10.6.8 to Mavericks 10.9.2.
2 Days all was OK. Next Morning-Start he needs (until now) 3 minutes to show me a SCREEN only milky white. After that he starts like ever with all ICONS in about 1 minute. (together 4 min.)
..But I must notice, that I cannot make anything, because the „BLUETOOTH APPLE WIRELESS KEYBOARD and the APPLE MAGIC MOUSE“ doesn't work anything like before.
I could nothing do, I must drop my APPLE only out.
That I maked ever 10x and all was the same... (Maveriks also 4x new updated)
I taked my Logitech-Bluetooth-Mouse from the WIN-Laptop, dropped it in USB from iMAC...and in one second I could work only with this MOUSE...I buyd the Logitech COMBO K520 and all was OK now with my lovely APPLE iMAC to work with him...But without APPLE KEYBOARD and MAGIC MOUSE...and with a 4 min. -START until now.
I asked the EXPERTS from APPLE-SUPPORT under Tel. 0800-6645451 in Germany, became a Number, maked many Things by starting new, but the mistake after all is the same like before.
When I look into ...Apple/ Info/System/ Hardware/ Bluetooth ..my APPLE says: NO INFOs FOUND (Es wurden keine Informationen gefunden.)
Under Hardware/ Diagnose : Selbsttest beim Einschalten: zuletzt ausgeführt: 15.05. 14, Ergebnis: Bestanden (that means OK) !!
I asked many Peaple, who sold APPLE-Computers in the STORS, but they all had no IDEA, how they can help.
I think, it could be a DRIVER when Starting the BIOS, JAVA RUNTIME a.s.o...
Is an Expert under YOU to help me by my Problem with this iMAC ?

dietmarfromdeu,
if you start up your iMac in Safe mode, do you still have Bluetooth problems with your Apple wireless keyboard and Magic Mouse?

Please help....I have lllllll's and !!!!!!! following my mouse and all over my screens.....

Please help....I have lllllll's and !!!!!!! following my mouse and all over my screens.....

not to mention..............................&;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;;;;;;

Please help me. I just cleaned the disk and, when I clicked to install new OS X mavericks a screen with apple id popped up and said that I need to put apple id that purchased the OS X.

Please help me. I just cleaned the disk and, when I clicked to install new OS X mavericks a screen with apple id popped up and said that I need to put apple id that purchased the OS X.

How did youobtain OS X?

Please HELP! I updated to Lightroom 5.7, and now it won't open!!!

Please HELP! I updated to Lightroom 5.7, and now it won't open! I have Windows 7. What can I do to fix this ASAP?!?! I was working on an important project that I need to finish pronto for possible publication!!! Can anyone help me out??? Thanks soooo much!

deepakgahlot wrote:
Hi
1. Go to the “Preferences” folder (Win: C:\Users\Name\AppData\Roaming\Adobe\Lightroom\Preferences
2. Delete “Lightroom 5 Preferences.agprefs” should it be there
3. Rename the “Preferences” folder to “PreferencesXY”
4. Start LR5 – it should now start and create a new LR5 catalog
Of course, the user may not want a new catalog ... in fact, most people don't want a new catalog ...

My phone has gone into recovery mode on its own. says to connect to itunes. i have restored it 10 times and it does nothing please help me i am out of the country and desparate

my phone has gone into recovery mode on its own. says to connect to itunes. i have restored it 10 times and it does nothing please help me i am out of the country and desparate

Open iTunes on computer. Connect iPhone to computer. If the iPhone is recognized in Recovery Mode, then Restore the Firmware. If not recognized, then hold both Home and Power Buttons until the iPhone is recognized in Recovery Mode. Usually takes about 20 seconds of holding both buttons. Restore the iPhone Firmware.

Please help me how concatenate all the error messages and send it as out parameter value.

Hi Experts,
Please help me how concatenate all the error messages and send it as out parameter value.
Thanks.

Agree with Billy, exception handling is not something that is done by passing parameters around.
PL/SQL, like other languages, provides a suitable exception handling mechanism which, if used properly, works completely fine. Avoid misuing PL/SQL by trying to implement some other way of handling them.

HT1386 please help me to make synch between my computer and iphone , on the file tab it is not possible to click, thanks

my dear,
please help me to make synch between my computer and iphone , on the file tab it is not possible to click.
appreciate your help and thanks in advance.
regards
hesham

You can't
Apple has never approved a method to downgrade iOS
Allan

HT201210 cont contact apple server error please help with ipad touch 4. im just fed up with apple please help me because why is it only apple with these kind of problems?

cont contact apple server error please help with ipad touch 4. im just fed up with apple please help me because why is it only apple with these kind of problems?

If you mean updae server
Update Server
Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- For one user uninstalling/reinstalling iTunes resolved the problem
- Try on another computer/network
- Wait if it is an Apple problem
Otherwise what server are you talking about

Please help, my iMac crashed when i open safari and my screen was blinking, then blackout and force to restart.

Please help, my iMac crashed when i open safari and my screen was blinking, then blackout and force to restart. Why is this happening? This is the crash report from my iMac.
Anonymous UUID:       0CC51978-99A7-1665-7EFF-A04BF2E05D6E
Sun Aug 3 20:45:04 2014
panic(cpu 0 caller 0xffffff80100dc24e): Kernel trap at 0xffffff801005248e, type 13=general protection, registers:
CR0: 0x0000000080010033, CR2: 0x00007fff73cf3638, CR3: 0x000000000952f04e, CR4: 0x00000000000606e0
RAX: 0xffb9b9b9ffbbbbbb, RBX: 0xffffff801c66d3c0, RCX: 0x0000000000000030, RDX: 0xffffff801c66d418
RSP: 0xffffff80abb23c80, RBP: 0xffffff80abb23cd0, RSI: 0x0000000000000001, RDI: 0xffffff801c66d3c0
R8: 0x0000000000000001, R9: 0xffffff8010601910, R10: 0x00000000000003ff, R11: 0xffffffffffffffff
R12: 0x0000000000000000, R13: 0xffffff801cff60d8, R14: 0xffffff801c9fefd8, R15: 0x0000000000000000
RFL: 0x0000000000010287, RIP: 0xffffff801005248e, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x00007fff73cf3638, Error code: 0x0000000000000000, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff8084698c50 : 0xffffff8010022f79
0xffffff8084698cd0 : 0xffffff80100dc24e
0xffffff8084698ea0 : 0xffffff80100f3746
0xffffff8084698ec0 : 0xffffff801005248e
0xffffff80abb23cd0 : 0xffffff8010051dc9
0xffffff80abb23dd0 : 0xffffff7f909ef726
0xffffff80abb23e50 : 0xffffff7f909ef15c
0xffffff80abb23ed0 : 0xffffff7f909eee0b
0xffffff80abb23f20 : 0xffffff80104353b5
0xffffff80abb23f50 : 0xffffff8010440a33
0xffffff80abb23fb0 : 0xffffff80100f3f46
      Kernel Extensions in backtrace:
         com.apple.kec.pthread(1.0)[882075E6-12C4-3225-8750-928715183739]@0xffffff7f909e a000->0xffffff7f909f4fff
BSD process name corresponding to current thread: ReportCrash
Mac OS version:
13E28
Kernel version:
Darwin Kernel Version 13.3.0: Tue Jun 3 21:27:35 PDT 2014; root:xnu-2422.110.17~1/RELEASE_X86_64
Kernel UUID: BBFADD17-672B-35A2-9B7F-E4B12213E4B8
Kernel slide:     0x000000000fe00000
Kernel text base: 0xffffff8010000000
System model name: iMac12,2 (Mac-942B59F58194171B)

Both Memory Clean and Clean My Mac could have cause the damage which triggered the kp.
I would back up your Mac, erase and reinstall. Then Migrate your user data from the backup.
Uninstalling Tuxera is a troubleshooting process. You don't have to keep it uinstalled, just long enough to test to see if it is causing the problems.
However, if it doesn't happen regularly, it would be hard to determine if it was the cause. And, as I mentioned, I don't think it would be the cause.

Please help. Setting up a Library on external HD and reconfigure Apple TV

Similar Messages

Maybe you are looking for